REVIEW MATERIALS FOR WPR COURSE
1.0n construction site, who can stop work?
a)Contractors
b)Permanent Employees
I
2.SWA is referenced or cited in the
a. Construction Safety Manual
b. Safety handbook manual
c. Work permit system3.Select the correct order for SWA steps
b) Notify, stop, Follow up
c)Stop, follow up, Notify
Goup Lock box is used to avoid large numbers of tags and locks
on each isolating points
TRUE
FALSE '4.As per CSM 4.11.4, SWA signs shall be mounted in
clearly visible locations to remind everyone of their
SWA responsibilities,
b) False
5.People chose to do something unsafe or not
follow safety procedures, is called unsafe act.
b) False6.Two Barriers against the hazards:
Ans: Equipment and human barriers
7.What is the responsibility of LPD?
A health hazard is anything that can have an adverse
impact on your health8. Damaged equipment or material found on site , what you
will do?
a) Leave the area
¢) Do your job
9.What are the hazards of forklift?
b) Unauthorized operator, Rollover, Overloading10.What PPEs are used for Noise hazards?
b)Ear plug, Earmuffs, Gloves
c) Ear plug, Earmuffs, Respirators
11.How far the spoil to be accumulated or
I
store near the edge of Excavation?
860 Gna
b)40 cm
c)30.cm12. is anything that have an adverse to your safety:
13. \dentify three safety precautions workers must take when abrasive
blasting
14. Moving equipment Hazard
b, Drowning and electrocution
c. Buried and electrocution15.Select the confined space
b) Classroom
c) Well head16.The toxic, low oxygen and undesired materials are
present in the confined space. which type of ventilation
you will use?
a) Natural Ventilation
c) Proper ventilation
I
17.Before entry in confined space, you need to do
gas test.
b)False18,Confined space supervisor should stay on job.
b)False
19.Every confined space needs a confined space entry
supervisor CSES.
a) fue 1
b)False20.Who can enter in confined space?
b)Anyone
c) Only supervisor
21.4 confined'space entrant is anyone who is trained to
enter a confined space to perform work.
b)False22.In some specific cases, standby man can be assigned
as a fire watch.
b)False23.The standby man has to leave the area and no relief is
provided, the entrants must evacuate the space.
a) fue
b)False24.When a worker is surrounded and overcome by
granular substance like soil, sand, gravel, grain.it is called
b)Heat stress
c) Suspension trauma
25.The fire hazards which can result from non-flammable
materials:
a) Paints and thinner26.Electrical isolation will depend on:
b)Removing fuses, disconnecting cables, blinding
c) Report to supervisor27.Arc flash G | no 2.721
b) False28.Ventilation shutdown and wait for the gas test
a) 10 min
b) 20 min
29.What do you call workers who operate or use of
equipment or operational processes that requires servicing
or maintenance under isolation Lock out Tag out?
a. Authorized personnel
b.Affected personnel
c. Regular employee
— seo" Whar ke craw nr nr eantrartar nareannal30.Locking and tagging equipment lets other operators,
contractors or maintenance crews know that the
equipment is safe to work on and can not be
a) Repaired
b) Switched off
¢)
d) Serviced31. What Is sample of a Primary Isolation
h
32. Samples of Positive Isolation
a) Blinding33, High Level of Protection in ISOLATION
34,To isolate, Physically removing or dropping a
spool of piece is :
a) Blinding
b) Single block valve
c) Double Block & Bleed35. What you will do if first time to enter in a Vertical entry
1, Entry system
2. Exit System
36, Can you start a fire without flammable materials.
2, Falseh
39, WHO CAN DO THE LOTO?
40 Wind speed limits for use of: |
a. Crane (max 32kph).
b. Man-basket (25kph).
c. Scaffolding (65kph).43. Hazard in noise & vibration
a. Vibration white finger
b. Vibration black finger
c. Hearing will not be loss
d. Heart disease
44. Which two things must be checked before operating
heavy equipment?
a. Hydraulic pressure and operator's certificate
b. Manufacturer's manual and inspection certificate
c. Operator certification and safe clearance from
equipment
d. Lift plan approval and operator's certificate45, Required at all access points in scaffold
a. Red tag: do not use scaffold/ No access
b. Yellow tag: full body harness required.
c, Green tag: scaffold complete, no harness required