Professional Documents
Culture Documents
Question 1
Complete
If the applied power to a system is 5µW at 100mV and the output power is 48 W determine the following:
a. Power in dB 69.83 dB
c. input impedance 2 kΩ
73.83 dB
62.83 dB
3 kΩ
1585.64
Question 2
Complete
The difference of the higher cutoff and lower cutoff frequency is called bandwidth .
https://collvle.neu.edu.ph/mod/quiz/review.php?attempt=1086783&cmid=54892 1/3
3/19/23, 9:34 PM Quiz 2: Attempt review
Question 3
Complete
The 0.707 multiplier was chosen because the output power is half the midband power output at mid frequencies.
Select one:
True
False
Question 4
Complete
The larger the capacitors in the system will have an impact on the high frequency response of BJT.
Select one:
True
False
Question 5
Complete
Select one:
True
False
Question 6
Complete
In the Mid frequency range, there is no effect of the capacitor elements in the system, but only the resistive
elements and controlled sources.
Select one:
True
False
https://collvle.neu.edu.ph/mod/quiz/review.php?attempt=1086783&cmid=54892 2/3
3/19/23, 9:34 PM Quiz 2: Attempt review
Question 7
Complete
The smaller the capacitances will have an impact in the high frequency response on the system.
Select one:
True
False
Previous activity
◄ Quiz 1
Jump to...
Next activity
Quiz 3 ►
Stay in touch
New Era University
https://neu.edu.ph
+632-8-981-4224
https://collvle.neu.edu.ph/mod/quiz/review.php?attempt=1086783&cmid=54892 3/3