Professional Documents
Culture Documents
Question 1
Correct
The transfer function is always computed with all initial conditions equal to zero.
Select one:
True
False
Question 2
Correct
Select one:
a. Transfer function
b. Routing Protocol
c. Amplification factor
d. Error correction
https://trimestralexam.amaesonline.com/2233/mod/quiz/review.php?attempt=64563&cmid=5529 1/10
6/20/23, 3:48 PM Prelim Exam: Attempt review
Question 3
Correct
b. Sensitivity to disturbance
c. Low cost
d. Simplicity
https://trimestralexam.amaesonline.com/2233/mod/quiz/review.php?attempt=64563&cmid=5529 2/10
6/20/23, 3:48 PM Prelim Exam: Attempt review
Question 4
Correct
Select one:
a.
b.
c.
https://trimestralexam.amaesonline.com/2233/mod/quiz/review.php?attempt=64563&cmid=5529 3/10
6/20/23, 3:48 PM Prelim Exam: Attempt review
Question 5
Correct
Select one:
a. 2 only
b. 1 and 2
c. 1 only
d. Neither
Question 6
Correct
Select one:
a.
b.
c.
https://trimestralexam.amaesonline.com/2233/mod/quiz/review.php?attempt=64563&cmid=5529 4/10
6/20/23, 3:48 PM Prelim Exam: Attempt review
Question 7
Correct
Question 8
Correct
Select one:
a.
b.
c.
https://trimestralexam.amaesonline.com/2233/mod/quiz/review.php?attempt=64563&cmid=5529 5/10
6/20/23, 3:48 PM Prelim Exam: Attempt review
Question 9
Correct
Select one:
a. -1, -2
b. -1, -4
c. 1, -2
d. -1, -5
Question 10
Correct
control system is an interconnection of components forming a system that will provide a desired system response.
energy converter amplifier set
Question 11
Correct
Select one:
True
False
https://trimestralexam.amaesonline.com/2233/mod/quiz/review.php?attempt=64563&cmid=5529 6/10
6/20/23, 3:48 PM Prelim Exam: Attempt review
Question 12
Correct
The following figure shows the block diagram of the open-loop control system. Label the figure:
1. input
2. controller
3. actuating signal
4. plant
5. output
Question 13
Correct
Time-invariant systems are systems where the output for a particular input which changes depending on when that input was applied.
Select one:
True
False
Question 14
Correct
LTI systems are a class of systems used in signals and systems that are both linear and time-invariant.
Select one:
True
False
https://trimestralexam.amaesonline.com/2233/mod/quiz/review.php?attempt=64563&cmid=5529 7/10
6/20/23, 3:48 PM Prelim Exam: Attempt review
Question 15
Correct
Based on some parameters, we can classify the control systems into the following ways. Choose Three.
Question 16
Correct
The negative feedback adds the reference input while positive feedback reduces the error between the reference input.
Select one:
True
False
Question 17
Correct
If y(t) = 2 x1(t) - 5x2(t) – 12x3(t) will be delayed by 4, Which of the following is correct LTI property?
Select one:
a. y(t) = 8 x1(t) - 20x2(t) – 48x3(t)
https://trimestralexam.amaesonline.com/2233/mod/quiz/review.php?attempt=64563&cmid=5529 8/10
6/20/23, 3:48 PM Prelim Exam: Attempt review
Question 18
Correct
Select one:
True
False
Question 19
Correct
1. input
2. control system
3. output
mechanics
https://trimestralexam.amaesonline.com/2233/mod/quiz/review.php?attempt=64563&cmid=5529 9/10
6/20/23, 3:48 PM Prelim Exam: Attempt review
Question 20
Correct
Determine the stability base from the location of the poles in the figure:
Pole 1: Stable
Pole 2: Unstable
Pole 3: Unstable
Question 21
Correct
Select one:
a. actuating signal
b. wifi signal
c. error signal
◄ Announcements
Jump to...
https://trimestralexam.amaesonline.com/2233/mod/quiz/review.php?attempt=64563&cmid=5529 10/10