You are on page 1of 1

UNIVERSITY OF MINES AND TECHNOLOGY, TARKWA

FIRST SEMESTER EXAMINATIONS, DEC 2014


COURSE NO : MC/EL/CE/MA/PE/GM/GL/MN/MR/ES 155
COURSE NAME: TECHNICAL DRAWING
CLASS : BSc I TIME: 3 HOURS

Name: __________________________________________ Index Number: _______________

Draw to full scale, using first angle projection, the following views of the inulation bracket shown below :
a) A front elevation in the direction F
b) An end elevation; and
c) A plan,

Show all hiden details.

All dimensions are in mm

Note: Bracket is symmetrical about the horizontal center line.

Examiners: Dr. Simons/Adzimah/Akinwonmi/Ntow

Page 1 of 1

You might also like