Professional Documents
Culture Documents
CENGR515
LABORATORY EXERCISE No. 2
A. Create the geometry of the structure shown in the figures below. Use any applicable
method discussed in Creating Structure Geometry (Working with grids, Using the Geometry
Toolbar, Creating Geometry Using Tables, Using Structure Wizard)
3m
3m
Isometric View of the Entire Structure
Note: The supports and dimension lines are shown for information only.
Y
X
3m
5m 5m 5m 5m 5m 5m
B. Use the following date for Edit Job Information:
Job: CENGR 515 Lab
Client: n/a
Job No: Laboratory Exercise No. 2
Rev.: n/a
Part: n/a
Ref: n/a
Name:
Engineer: Ex. JADelacruz
Checker: JAJulian
Date: 01-Oct-19
Note: This data will serve as reference for checking and recording of your score.
CENGR515
LABORATORY EXERCISE No. 3
Note: The supports and dimension lines are shown for information only.
In the Geometry menu, select Snap/Grid Node - Beam. Set the plane of the
grid to XZ.
Select all the Beams created, then use Geometry > Translational Repeat to
create the upper triangle.
On the Translational Repeat dialog box…
Global Direction: Y
No. of Steps: 1
Default Step Spacing: 10m
Generation Flags: All
Link Steps: (checked)
• Using Geometry > Add Beam, draw the diagonals and remaining members.
Note: This data will serve as reference for checking and recording of your score.