6. Fit the diaphragm (6) and diaphragm spring (7).
7. Fit the diaphragm cover (8).
Check - Measuring the speed on the oil mist separator
An angled ABS sensor should be used to measure the speed on the oil mist separator. Cut the electrical cables and fit two connectors suitable for a multimeter which can measure Hz, see illustration.
80235645
1. Start the engine and rev it up to 1000 rpm.
2. Hold the sensor against the oil mist separator and read the multimeter. The value should be at least 150 Hz at an engine speed of 1000 rpm. 9, 11 and 12 litre engines with PDE or HPI