You are on page 1of 7

1.1.

SD-Data Center (Spine, Leaf and Controller) Specification


No. Minimum Requirements Evaluation Bidders
Criteria Response
I. Spine Switches Quantity 4 (2 for DC and 2 for DR)
1. Model must be specified Mandatory
2. MAF must be attached Mandatory
3. The vender Must be in Gartner’s Leader quadrant at least Mandatory
twice within the last consecutive 3 years
4. The solution must support both IPV4/IPV6 Mandatory
5. The solution must support SNMPv2c/v3, RMON MIBS, Mandatory
Telnet, and SSHv2
6. The solution must support a EVPN overlay network using Mandatory
BGP and VXLAN
7. The solution must support VRFs to separate routing domains Mandatory

8. The solution should support the latest OS version Mandatory


9. The proposed solution must support the following Layer 2 Mandatory
Features:
• 802.1w R1apid Spanning Tree
• 802.1s Multiple Spanning Tree Protocol
• Rapid Per Vlan Spanning Tree (RPVST+)
• 4096 VLANs
• 802.3ad Link Aggregation/LACP
• MLAG (Multi-Chassis Link Aggregation)
• 802.1Q VLANs/ Trunking
• 802.1AB Link Layer Discovery Protocol
• 802.3x Flow Control
• IGMP snooping
• Storm Control
10. The proposed solution must support the following Layer 3 Mandatory
Features:
•Static Routes
• Routing Protocols: OSPF, OSPFv3, BGP, MP-BGP, IS-IS,
and RIPv2.
• VRF
• VRRP
• Virtual ARP (VARP)
• Policy Based Routing (PBR) *
• Route Maps
11. The switch must support the following Security Features: Mandatory
• ACLs using L2, L3, L4 fields
• ACL Logging and Counters
• Service ACLs
• DHCP Relay
• MAC Security
• RADIUS
• ARP trapping and rate limiting
12. The switch should support the following Quality of Service Mandatory
(QoS) Features:
• Strict priority queuing
• 802.1p based classification
• Policing / Shaping
• Rate limiting
13. Support 32 x 40/100G QSFP Mandatory
14. Throughput :-6.4Tbps Mandatory
15. Packets/Second :-2.4Bpps Mandatory
16. CPU:- 4-Core Mandatory
17. SSD:-128GB Mandatory
18. Buffer :-24MB Mandatory
19. System memory - 16GB Mandatory
20. Management port: Mandatory
 RJ45=1
 RS-232 Serial Ports
21. USB Ports -1 Mandatory
22. Rack unit :1RU Mandatory
23. 2*Power cable: Power Cord, 250VAC 10A CEE 7/7 Plug, Mandatory
EU
24. Connecter :full kit Mandatory
25. Rack Kits: With full kit and full accessory Mandatory
26. Power supply : Redundant hot-swappable power supply Mandatory
27. Fan module : Redundant hot-swappable fan Mandatory
28. License : Three year license for VXLAN, layer 3 EVPN, Mandatory
full routing , SR-MPLS, BPR, MPLS Layer 3 VPN, Tenant
Routed Multicast, Load Balancing and MACsec
29. Warranty:1 year Mandatory
30. Support :24/7 for three years Mandatory
31. Deployment: Professional Service from vendor Mandatory
II. Leaf switch 8 (4 for DC and 4 for DR)
1. Model must be specified Mandatory
2. MAF must be attached Mandatory
3. The vender Must be in Gartner’s Leader quadrant at least Mandatory
twice within the last consecutive 3 years
4. The solution must support both IPV4/IPV6 Mandatory
5. The solution must support SNMPv2c/v3, RMON MIBS,
Telnet, and SSHv2
6. The solution must support a EVPN overlay network using Mandatory
BGP and VXLAN
7. The solution must support VRFs to separate routing domains Mandatory
8. The solution should support the latest OS version Mandatory
9. The proposed solution must support the following Layer 2 Mandatory
Features:
• 802.1w Rapid Spanning Tree
• 802.1s Multiple Spanning Tree Protocol
• Rapid Per Vlan Spanning Tree (RPVST+)
• 4096 VLANs
• 802.3ad Link Aggregation/LACP
• MLAG (Multi-Chassis Link Aggregation)
• 802.1Q VLANs/Trunking
• 802.1AB Link Layer Discovery Protocol
• 802.3x Flow Control
• IGMP snooping
• Storm Control
10. The proposed solution must support the following Layer 3 Mandatory
Features:
• Static Routes
• Routing Protocols: OSPF, OSPFv3, BGP, MP-BGP, IS-IS,
and RIPv2.
• VRF
• VRRP
• Virtual ARP (VARP)
• Policy Based Routing (PBR) *
• Route Maps
11. The switch must support the following Security Features: Mandatory
• ACLs using L2, L3, L4 fields
• ACL Logging and Counters
• Service ACLs
• DHCP Relay
• MAC Security
• RADIUS
• ARP trapping and rate limiting
12. The switch should support the following Quality of Service Mandatory
(QoS) Features:
• Strict priority queuing
• 802.1p based classification
• Policing / Shaping
• Rate limiting
13. Support Ports for uplink :- 6*40/100Gbps Mandatory
14. Support Port for downlink :- 48 x 1G/10G/25G Mandatory
15. Throughput :- 3.6Tbps Mandatory
16. Packets/Second:-2.4Bpps Mandatory
17. CPU – 4 Mandatory
18. Buffer:-24MB Mandatory
19. SSD :-64GB Mandatory
20. System Memory:-24 GB Mandatory
21. Management Ports: Mandatory
 RS-232 Serial Ports -1
 100/1000 RJ45 or SFP
22. USB Ports -1 Mandatory

23. Rack unit :1RU Mandatory


24. 2*Power cable Mandatory
25. Connecter :full kit Mandatory
26. Rack Kits: With full kit and full accessory Mandatory
27. Power supply : redundant hot-swappable power supply Mandatory
28. Fan module : redundant hot-swappable fan Mandatory
29. License : three year license for VXLAN, layer 3 EVPN, full Mandatory
routing , SR-MPLS, BPR, MPLS Layer 3 VPN, Tenant Routed
Multicast, Load Balancing and MACsec
30. Support :24*7 for three years Mandatory
31. Warranty :1 year Mandatory
32. Deployment: Professional Service from vendor Mandatory
III SDN controller Quantity 3 (2 for DC and 1 for DR)

1. Model must be specified Mandatory


2. MAF must be attached Mandatory
3. The vender Must be in Gartner’s Leader quadrant at least Mandatory
twice within the last consecutive 3 years
4. Programmability and Openness: Mandatory
Open flow, OVSDB, Netconf,
SNMP North bound interface:
RESTConf
5. SDN Controller Availability: Mandatory
3SDN Controller nodes with N+2 redundancy
SDN node failure detection in the cluster
6. Centralized Fabric Management: Mandatory
- Automatic fabric discovery single pane across
networking, hypervisors, and Layer 4-layer 7 services
- Intuitive GUI and REST APIs
7. Management upgrades, versioning, and scale-out: Mandatory
 Upgrade of switches and SDN Controller across the
fabric (zero-touch)
 Fault, event and Performance management

8. Monitoring Mandatory
 Virtual network interface cards (NICs) (VMware)
Received and transmitted ingress and egress packets
Broadcast, multicast, and dropped packets
 Health scores Historical records of health scores
Fabric Spine, leaf
 Ingress and egress counters Unicast, multicast, flood, and
drop EPG (VLAN and Virtual Extensible LAN
[VXLAN]).

CLI, APIs, Management Features

9. 3-Node cluster for high availability operating environment Mandatory


(CLI, APIs, management features, etc.)
10. Topology Discovery Mandatory
Ability to build a physical connectivity map of the network
11. VXLAN Services:-VXLAN Control Services (VCS) for Mandatory
Standard VXLAN features include VXLAN encapsulation,
Layer 2 connectivity, Layer 3 connectivity, communication
between VXLANs and traditional networks
12. Open Virtual Switch Database (OVSDB) Services:-Layer Mandatory
2 hardware VTEP integration for synchronizing network
topology information, MAC to VXLAN endpoints, and
VXLAN ID bindings with overlay controllers.
13. Open Stack Services: Integration with Open Stack via ML2 Mandatory
driver plugin for provisioning of network services (VLAN,
VXLAN, etc)
14. Macro-Segmentation Services: Dynamically instantiate Mandatory
network services policy in the physical network

15. Integration: support for VMware NSX and Open Stack and Mandatory
integration with Other technology
GUI or Portal management features

16. User Security: Mandatory


- AAA Local Authentication
- AAA Role-based Authorization
- RADIUS Authentication
- RADIUS Role-based Authorization
- RBAC - Custom role definition for authorization
17. XML and JSON-based REST APIs for the portal Mandatory
functionality
18. Network Provisioning :– Mandatory
 Device connectivity status (up/down)
19. Labels: Define and apply custom labels View device labels Mandatory
from the network provisioning page Filter network
provisioning view based on device labels
20. Tap Aggregation Integration of the Tap Aggregation GUI Mandatory
tool
21. Change Management: Single-device software upgrades Mandatory
Snapshot Network-wide Smart System Upgrade (SSU)
Network-wide Rollback

Hardware performance

22. Controller Physical Appliance Mandatory


23. CPU =2* 1.7 GHz Xeon Mandatory
24. RAM =64GB Mandatory
25. Hard Drive =2 TB Hard Drive Mandatory
26. Network interface: The Servers Should have 2*1/10Gb Fiber Mandatory
Optic SFP to the fabric connection and 1*1Gb port for out-of-
band management
27. Power Supply : Dual Mandatory
28. 2* Power cable (European standard) Mandatory
29. Fan module: dual Mandatory
30. Rack kit :full kit and accessary Mandatory
31. Connecter :full kit Mandatory
32. License: 3-node clustered configuration license , node connection Mandatory
for spine ,leaf switch and L4-L7 for three year

33. Support :24*7 for three year Mandatory


34. Warranty: 1 year Mandatory
35. Deployment: Professional Service from vendor Mandatory
Table 3: SD-Data Center
Total AOC (Active Operational Cable) for Spine switch
NO Transceiver module Quantity Evaluation Bidders
Criteria
Response
1 QSFP100 100GbE Active 16 Mandatory
Optical Cable 5meter for Data
Center leaf interconnection
Total Transceiver module for leaf switch
No. Transceiver module Quantity Evaluation Bidders
Criteria
Response
1 25G Fiber Optics 20 Mandatory

2 10G Fiber Optics 50 Mandatory

4. RJ-45 (copper) with SFP to RJ-45 70 Mandatory


converter
5 40 G Fiber Optics 14 Mandatory

Table 4: Transceiver module

You might also like