Professional Documents
Culture Documents
Outdoor station
Instruction
Disconnect the Outdoor Station, Press the door button or call button without releasing it, the
power it on, and let it go after the outdoor station beeps three times, it I initialized successfully.
Press *+ administration password (the initial administrator password is 999999) +”#” to entre
the setting mode, at this time, the key button light flashes slowly. The following settings need
to be completed in the setting mode.
Management password: press 0 (key button light flashes quickly) +77 +# NNNNNNN ( six-digit
password) +#+ NNNNNNN (enter the password again) +# (BI—beep, Number button light
flashes slowly), the machine restores factory Settings.
Restore factory Settings: press 0 (key butto light flashes quickly)+99 +# (BI—beep, number
button light flashes slowly), the machine restores factory settigs.
Modify the public unlocking password in zone 1: press 0 (key button light flash)+ 11+#+
NNNNNNNN (4-6 bist)+#+ NNNNNN (4-6 bits)+# after beeping, the modification is successful
and the setting mode is returned.
Pree 2 (the number key light flashes) +NNN +#(NNN reprents any position of the card number
that you want to delete in 000-199), and the buzzer BI BI rings twice, then the card number and
password at this position will be deleted.
Press 2+ to read the card and delete the card number and corresponding password (the buzzer
Bibi rings twice).
Delete all
Press 2 (the number key button flashes) + 88 + #(Bi-----Bi Bi…Bi – Ring, the key button light
stops flashing indicates that clearance is successful.
Press 4 (key button light flashes)+ 00-99 (indicating the unlock time) +# (BIBI two beeps, key
button light flashes slowly), the setting is successful. If set to 02, the unlock time is 2 seconds,
etc. but if set to 00, the sensor wipe the card once is on and the swipe again is off.