Professional Documents
Culture Documents
I-4
I-2a Plate
240
30
Main Joint
PLAN
DETAIL at “A” DETAIL at “C” Standart Section I-3
10
Angle 65/65/6
I-la Rod φ 12 mm I-4
I-lc
Lacing. Plate 283 / 100 / 10
I-2a
Rod φ 12 mm 6
I-lc
6
6
Rod φ 12 mm 6
I-lb 50 50
“A” 300 1100 1100 300
300
Angle 65/65/6 4 66 NOTES :
I-la
1) To obtain uniformity, use of templates and jigs
MAIN JOINT Rod φ 12 mm is mandatory for holing bending and welding
I-lb
Rod φ 12 mm Lacing. of assembly.
I-lb Tube φ 76.1/3.65
I-2b
l = 2621 HMG / Ministry of Local Development
Angle 65/65/6 DETAIL at “B” DoLIDAR / Short SpanTrail Bridge Standard
I-la
4 Bridge Name:
Bolt + Nut + washer No: Span:
I-5 I-6 I-7 Steel Drawing:
Plate 290/296/6
119 φ 76.1 12 33 10 331
I-3 Intermediate Element
100 φ 76.1
Rod φ 12 mm
for Tower No. 1, 2 or 3
I-lc
Assembly & Welding Details
Plate 290/58/6
I-5
Date : September 30, 2002 Drawing No. 109N
Produced by Nepal Swiss Association for International Cooperation, in partnership with His Majesty’s Government of Nepal, funded and supported by the Swiss Government (SDC Nepal). 27