Professional Documents
Culture Documents
Embedded Firmware
(jump to Setup Software)
Known Issues
Meters on Front Panel Portal can get out of sync and/or out of place. Sometimes they freeze and at times they show old data or data in
the wrong channels. This does not affect the audio output of the unit.
Generated tone levels in alignment mode are 3dB higher than generated pink noise levels
The aux output will not mute when PCM Mute is enabled for the current input and the current input format is PCM
Switching to the Non-sync input while configured for format 71 (Mono C), can sometimes result in distorted audio output. The CP750
must be restarted.
Known Issues
Meters on Front Panel Portal can get out of sync and/or out of place. Sometimes they freeze and at times they show old data or data in
the wrong channels. This does not affect the audio output of the unit.
Generated tone levels in alignment mode are 3dB higher than generated pink noise levels
The aux output will not mute when PCM Mute is enabled for the current input and the current input format is PCM
Switching to the Non-sync input while configured for format 71 (Mono C), can sometimes result in distorted audio output. The CP750
must be restarted.
The user will connect the 8-channel audio from the server to the Digital 1 input and the HI/VI-N channels (11/12) to the Digital 2 input. The Digital
1 input drives the MAIN AUDIO Output, and the Digital 2 input drives the AUX OUT Output.
After this modification, it is no longer possible to select DIG2 for the main output channels 1&2. If the user selects DIG2 in the system setup
software, the hardware will mute the 8-channel analog output. The user can still select DIG3 or DIG4. DIG3 and DIG4 will come out of channel
1&2 of the 8-channel analog output
Known Issues
Meters on Front Panel Portal can get out of sync and/or out of place. Sometimes they freeze and at times they show old data or data in
the wrong channels. This does not affect the audio output of the unit.
Known Issues
Meters on Front Panel Portal can get out of sync and/or out of place. Sometimes they freeze and at times they show old data or data in
the wrong channels. This does not affect the audio output of the unit.
Known Issues
Meters on Front Panel Portal can get out of sync and/or out of place. Sometimes they freeze and at times they show old data or data in
the wrong channels. This does not affect the audio output of the unit.
Known Issues
CP750 will loose TECS connection (cues from the Show Manager) after a long period (several days) of TECS activity. This shows up
particularly when the D-Cinema equipment rack is rebooted nightly while the audio rack (containing the CP750) is left running. A reboot of
the CP750 will resolve the symptom.
Meters on Front Panel Portal can get out of sync and/or out of place. Sometimes they freeze and at times they show old data or data in
the wrong channels. This does not affect the audio output of the unit.
Known Issues
Switching to a stream that will be Pro Logic II decoded can result in an audible audio artifact. on the screen channels.
Known Issues
Switching to a PCM stream that will be Pro Logic II decoded results in an audible audio artifact on the screen channels.
The Aux 7/8 RCA Output is not reliable and could produce audio artifacts.
No power on indication until 20 seconds after power is applied.
Input switching takes about 2 seconds. The front panel will always indicate the input that will be applied.
Front Panel Portal does not indicate Firmware Update progress.
Known Issues
No power on indication until 9 seconds after power is applied.
Dolby Digital decode results in slow meter updates.
Meters on Front Panel Portal can get out of sync and/or out of place. Sometimes they freeze and at times they show old data or data in
the wrong channels. This does not affect the audio output of the unit.
Input switching takes about 1 second. This includes stream switching on the same input (Dolby Digital -> PCM or PCM -> Dolby Digital).
Setting the real time clock (RTC) via ASCII Control is unreliable. Note that the clock has been set at the factory.
Front Panel Portal does not indicate Firmware Update progress.
Unimplemented Features
SNMP
USB connectivity
Pro Logic II
EQ Assist
7/8 Aux Output global delay and mute.
Known Issues
No power on indication until 9 seconds after power is applied.
Dolby Digital decode results in slow meter updates.
Meters on Front Panel Portal can get out of sync and/or out of place. Sometimes they freeze and at times they show old data or data in
the wrong channels. This does not affect the audio output of the unit.
Input switching takes about 1 second. This includes stream switching on the same input (Dolby Digital -> PCM or PCM -> Dolby Digital).
Setting the real time clock (RTC) via ASCII Control is unreliable. Note that the clock has been set at the factory.
Front Panel Portal does not indicate Firmware Update progress.
Unimplemented Features
SNMP
USB connectivity
Pro Logic II
EQ Assist
7/8 Aux Output global delay and mute.
Setup Software
+Setup Software
Known Issues
Changing Windows Theme can cause GUI corruption. A restart of the Setup Software will correct the corruption.
EQ Assist can inadvertently lower all EQ bands to zero. Flatten and re-running EQ Assist should resolve the issue.
Known Issues
Changing Windows Theme can cause GUI corruption. A restart of the Setup Software will correct the corruption.
EQ Assist can inadvertently lower all EQ bands to zero. Flatten and re-running EQ Assist should resolve the issue.
Known Issues
Changing Windows Theme can cause GUI corruption. A restart of the Setup Software will correct the corruption.
EQ Assist can inadvertently lower all EQ bands to zero. Flatten and re-running EQ Assist should resolve the issue.
Known Issues
Changing Windows Theme can cause GUI corruption. A restart of the Setup Software will correct the corruption.
EQ Assist can inadvertently lower all EQ bands to zero. Flatten and re-running EQ Assist should resolve the issue.
Known Issues
The Action->Update Software menu item closes the Setup Software and launches the included Dolby Software Update with no progress
indication. When that menu item is selected the Setup Software window will close and some time later (15 - 30 seconds) the Dolby
Software Update application will appear. The same thing happens when Dolby Software Update is then closed while returning to Setup
Software but with a shorter duration.
USB auto-connect can fail on Windows Vista. The user can use the Action->Connect to Local Device as a work around if needed.
Changing Windows Theme can cause GUI corruption. A restart of the Setup Software will correct the corruption.
EQ Assist can inadvertently lower all EQ bands to zero. Flatten and re-running EQ Assist should resolve the issue.
Known Issues
Un-commanded disconnect can occur and is not always displayed in the connection bar (Setup Software will continue to indicate
connected). Close and rerun the Setup Software when this occurs.
Always when the host PC sent into standby.
Always when the Setup Software is left running for 24 or more hours.
The meter display will show the same meter issues as is described for the Firmware.
Flatten EQ on the Room Tune tab only flattens the 27 Band Graphic EQ. It does not affect LFE or Bulk EQ.
Unimplemented Features
Dolby Installer
Unzip the file into a new folder and double click on CP750Setup.exe.
USB connectivity
Pro Logic II configuration support.
EQ Assist
Known Issues
Cannot save settings to a file on host computer disk.
Un-commanded disconnect can occur and is not always displayed in the connection bar (Setup Software will continue to indicate
connected). Close and rerun the Setup Software when this occurs.
Always when the host PC sent into standby.
Always when the Setup Software is left running for 24 or more hours.
Screen layout will turn sidewise (monitor panel shows to the right of the control panel) when reconnecting to a live CP750. Close and
rerun Setup Software when this occurs.
The meter display will show the same meter issues as is described for the Firmware.
Flatten EQ on the Room Tune tab only flattens the 27 Band Graphic EQ. It does not affect LFE or Bulk EQ.
The decimal value (tenths) on the SPL readout is always zero.
The Action->Update Software menu item closes the Setup Software and launches the included Dolby Software Update with no progress
indication. When that menu item is selected the Setup Software window will close and some time later (15 - 30 seconds) the Dolby
Software Update application will appear. The same thing happens when Dolby Software Update is then closed while returning to Setup
Software but with a shorter duration.
Unimplemented Features
Dolby Installer
Unzip the file into a new folder and double click on CP750Setup.exe.
USB connectivity
Pro Logic II configuration support.
EQ Assist