Professional Documents
Culture Documents
GLT machine:
• Located on guide rails top in the headroom
• Synchronous three-phased motor
• Direct transmission
• Power 2,7 – 8,0 kW COST EFFECTIVENESS
• Low installation cost
GLT ADVANTAGES • Low maintenance cost and easily accessible
• Superior travel and floor levelling precision spare parts (non-proprietary GMV policy)
• Quite and low vibration travel • Reduced energy consumption compared to ITALY - GMV S.p.A
• Reliable service traditionally geared machine Via Don Gnocchi, 10
20016 Pero (Mi)
SAFETY FLEXIBILITY Tel. +39 02 339301
• Automatic return to the nearest stop with door • Low forces on shaft walls due to the GLT Fax +39 02 3390379
opening in case of power failure (blackout) machine installed on guide rails top e-mail: info@gmv.it
• Manual lift control in case of emergency • Cabin and landing doors finishing available www.gmv.it
to free passengers by means of UPS from wide variety of coloured materials
• Advanced safety systems or stainless steel
• Fire resistant EI doors available as option • Electrical control panel located either
outside or inside the shaft in the cabinet
RELIABLE TECHNOLOGY which enables save inspection, maintenance
• Reliable technology which uses the experience and emergency operations Nr 1. GMV is the world’s
from different industrial sectors largest manufacturer
• GLT machine specially designed for machine LIFT REGULATIONS of hydraulic
room less elevators • Compliance with the Directive 2014/33/UE components for the lift
• VVVF frequency converter and with the harmonized standards: (elevator) industry
More than 800.000
• 60-year experience in lifts EN 81.20 / EN 81.50
elevators in the world
are equipped
with GMV hydraulics
Green Lift® GLT
SHAFT SECTION SHAFT PLAN
(1 ENTRANCE)
GREEN LIFT
GLT
Min. headroom 3500
Opening door 2225
Door 2000
SHAFT PLAN
Travel height ( max. 35 m )
(2 ENTRANCES)
Min. pit 1000
www.gmv.it
02/2018