NSL1440RC Class B Aircraft Rapid Cure Integral Fuel Tank Sealant
Product Description: Packaging:
NSL1440RC Class B is a fuel resistant sealant Available in 2½ and 6 oz. cartridges, pint, quart for use on integral fuel tanks and pressurized and gallon kits. Also available in premixed and cabins as well as other areas subject to contact frozen cartridges. Other size packaging available with aircraft fuels, lubricants, oils, water and/or upon request. weathering. Shelf Life: NSL1440RC Class B is a two-part polysulfide Sealed containers: 9 months when stored below base compound which cures at room tempera- 80°F. Slight changes in work life, viscosity and curing ture to a flexible, resilient rubber. rate may occur but will not affect end performance of the product. When mixed, NSL1440RC Class B is a thixotropic paste that will not flow. For mixed application life Typical Properties: details see cure profile below. UNCURED Color: Base Black Product Features: Curing Agent White • Excellent adhesion to aluminum, magnesium, Mixed Gray titanium, steel and numerous other aircraft Mixing Ratio: (by weight) 100:12 substrates. (by volume) 100:9.7 • Designed to withstand the attack of sulfur Non-volatile Content 97% compounds that are present in jet fuels and Viscosity, poise aviation gas. Base 11,000 2 • Service temperature range -65ºF(-54ºC) to Curing Compound 1,000 1 250ºF(121ºC) with excursions to 275ºF Specific Gravity 1.45 (135 ºC). Consistency Paste • Suitable for application by extrusion gun or CURED – ROOM TEMPERATURE spatula. Cured – 7 days @ R.T. 2 Tensile Strength, PSI 250 Heat-Accelerated Curing: Elongation, % 250 Increased temperature and relative humidity Durometer, Shore A 52 will reduce work life and speed up the cure. Min. Peel Strength, PPI 25 Reduced temperature and relative humidity will Flash Point >200ºF extend work life and slow the cure. Fungus Resistance Non-nutrient Replacement For: PR-1440 Class B ¹ Brookfield RVF Spindle #6 2 Brokfield RVT Sprindle #7 Conforms 4 To: 3 Conditions 77ºF and 50% R.H. 4 Material and data depicted on this TDS is provided to Dedicated Packaging, AMS-S-8802 & BMS5-26U by FAA-PMA Approval LLC by the approved manufacture supplier(s) for this material. Qualification and inclusion on the QPL(s) is by the supplier(s) per their material identification and conforms as required by the governing specification. B-1/2 B-2 Dedicated Packaging, LLC FAA PMA (800) 527.0011 Application Life (hrs) 3 1/2 2 4 Plum Ct. - Sleepy Hollow, Illinois 60118 www.nslaerospace.com Tack Free Time (hrs) 3 <5 <9 Dedicated Packaging, LLC Cure Time to 35 Shore A (hrs) <5 <12 an NSL Aerospace Company This document contains proprietary information and is not to be transmitted, reproduced or disclosed to anyone without written permission of NSL Aerospace.