Professional Documents
Culture Documents
Specifications For
Standoffs and Spacers
Page 7
Hex Male-Females
Round Spacers Round Swage Standoffs
Standoffs
Page 5 Page 6
Page 6
K001 K011
Amecoil Insert Amecoil Insert
Metric Thread Imperial Thread
Stainless Steel Page 9-12 Stainless Steel Page 13-16
9
TIP4 TIP5 TIP6 TIW1 TIW2 TR9G TR9P TR9R TR9H TR9Q TR9S
Threaded Insert Threaded Insert DIN 16903 DIN 16903
Press-In Weld-In Hexagonal Insert Round Knurled Insert
Page 17-18 Page 19 Page 20 Page 21
Hex Stand Offs (Steel)
With Internal Threads
Fuller Metric Part Number = I020 - Material - Diameter (d1) - Length
Zinc Plated Steel (Code=ST)
d1 b* s h11
3 7 5.5
4 9 7
M
5 11 8
6 14 10
*Above the double line the threaded length is reduced
d1 M3 M4 M5 M6
5 *
6 * *
8 * * *
10 * * * *
12 * * * *
14 * * * *
16 * * * *
18 * * * *
20 * * * *
25 * * * *
L
30 * * * *
35 * * * *
40 * * * *
45 * * * *
50 * * * *
55 * * * *
9 60 * * * *
70 * *
80 * *
100 *
Nominal Dimension
h11
over to
0 1 0 -0.060
1 3 0 -0.060
3 6 0 -0.075
6 10 0 -0.090
10 18 0 -0.110
18 30 0 -0.130
d1 b* s h11
2 7 4
M 3 7 5.5
4 9 7
*Above the double line the threaded length is reduced
d1 M2 M3 M4
5 * * *
6 * * *
8 * * *
10 * * *
12 * * *
14 * * *
16 * * *
18 * *
L 20 * *
25 * *
30 * *
35 * *
40 * *
45 * *
50 * *
55 * *
60 * * 9
Order Number → M3 x 5 = I020-BR-03-05
Nominal Dimension
h11
over to
0 1 0 -0.060
1 3 0 -0.060
3 6 0 -0.075
6 10 0 -0.090
10 18 0 -0.110
18 30 0 -0.130
d1 b* s h11 a ±0.2
3 6 5.5 5
4 7 7 6
M
5 9 8 8
6 11 10 10
*Above the double line the threaded length is reduced
d1 M3 M4 M5 M6
5 * *
6 * *
8 * * * *
10 * * * *
12 * * * *
14 * * * *
16 * * * *
18 * * * *
20 * * * *
25 * * * *
L
30 * * * *
35 * * * *
40 * * * *
45 * * * *
50 * * * *
55 * * * *
9 60 * * * *
70 * *
80 * *
100 *
Nominal Dimension
h11
over to
0 1 0 -0.060
1 3 0 -0.060
3 6 0 -0.075
6 10 0 -0.090
10 18 0 -0.110
18 30 0 -0.130
d1 b* s h11 a ±0.2
2 5 4 4
M 3 6 5.5 5
4 7 7 6
*Above the double line the threaded length is reduced
d1 M2 M3 M4
5 * * *
6 * * *
8 * * *
10 * * *
12 * * *
14 * * *
16 * * *
18 * *
L 20 * *
25 * *
30 * *
35 * *
40 * *
45 * *
50 * *
55 * *
60 * * 9
Order Number → M3 x 5 = I010-BR-03-05
Nominal Dimension
h11
over to
0 1 0 -0.060
1 3 0 -0.060
3 6 0 -0.075
6 10 0 -0.090
10 18 0 -0.110
18 30 0 -0.130
SIZE
Round Standoffs
SIZE
9 8
10
M3, M3.5, M4, M5
M3.5, M4, M5
3-51 BR, AL, NY, SS, ST
BR, AL, SS, ST
I043
I044
13 M4, M5, M6 BR, AL, SS I045
*Please contact us for availability*
Round Spacers
SIZE
SIZE
Thread Size “X”Length “Y” Minimum Full Thread Depth Minimum Body Length
M2.5 x 0.45 3.97 4.76 8.0
M3.0 x 0.5 4.76 6.35 9.5
M3.5 x 0.6 6.35 9.53 12.7
M4.0 x 0.7 9.53 11.1 15.9
M5.0 x 0.8 9.53 12.7 16.5
M6.0 x 1.0 12.7 15.0 19.3
M8.0 x 1.25 12.7 15.0 20.0
Threads longer or shorter than “X” length are available.
See the information page for maximum recommended “Y” Thread Depths where lengths are less than Minimum Body Lengths shown on the chart above.
SIZE
Size Thread Sizes Lengths Shank Length ± .08 Panel Hole Size Materials FMP #
4.5 M2, M2.5 3.58 - 3.66 BR, AL, SS I061
6 M3, M3.5 4.82 - 4.90 BR, AL, SS, ST I062
3-51 1.9, 2.7, 3.4, 4.2
8 M3.5, M4 5.99 - 6.07 BR, AL, SS, ST I063
10 M3.5, M4 5.99 - 6.07 BR, AL, SS, ST I064
*Please contact us for availability*
A B
Standoff Size
Size Tolerance Size Tolerance
4.5 2.8 3.53
6 3.8 4.78 +.00
± .05
8 5.1 5.94 -.08
10 5.1 5.94
Thread Depths
Tapped Thru Blind Tap Depth
Thread Size Aluminum, Brass, Stainless
Aluminum, Brass, Steel, Nylon Stainless Steel
Steel, Steel, Nylon
M1.6 X 0.35 9.5 6.4 4.8
M2 x 0.4 9.5 6.4 4.8
M2.2 x 0.45 15.9 9.5 4.8
M2.5 x 0.45 15.9 9.5 4.8
M3 x 0.5 25.4 12.7 6.4
M3.5 x 0.6 25.4 25.4 9.5
M4 x 0.7 25.4 25.4 11.1
M5 x 0.8 25.4 25.4 12.7
M6 x 1.0 25.4 25.4 14.3
M8 x 1.25 25.4 25.4 14.3
M10 x 1.5 25.4 25.4 14.3
1.Minimum Blind Tap Depths for short parts will be governed by the part body length.
2.For longer lengths of internal threads of greater Blind Tap Depths, contact Fuller Metric Parts Ltd.
Body Lengths
Thread Size 4mm 5mm 6mm 7mm 8mm 9mm
Min Max Min Max Min Max Min Max Min Max Min Max
M2.5 x 0.45 1.2 1.7 2.2 2.7 3.2 3.7 4.2 4.7
M3.0 x 0.5 2.1 2.7 3.1 3.7 4.1 4.7 5.1 5.7 6.1 6.7
M3.5 x 0.6 1.3 2.1 2.3 3.1 3.3 4.1 5.3 6.1
M4.0 x 0.7 3.0 3.8 4.0 4.8 5.0 5.8
Body Lengths
Thread Size 10mm 11mm 12mm 13mm 14mm 15mm
Min Max Min Max Min Max Min Max Min Max Min Max
M3.5 x 0.6 6.3 7.1 7.3 8.1 8.3 9.1 9.3 10.1
M4.0 x 0.7 6.0 6.8 7.0 7.8 8.0 8.8 9.0 9.8 10.0 10.8 11.0 11.8
Body Lengths
Thread Size 9mm 10mm 11mm 12mm 13mm 14mm
Min Max Min Max Min Max Min Max Min Max Min Max
M5.0 x 0.8 4.6 5.4 5.6 6.4 6.6 7.4 7.6 8.4 8.6 9.4 9.6 10.4
M6.0 x 1.0 3.2 4.0 4.2 5.0 5.2 6.0 6.2 7.0 7.2 8.0 8.2 9.0
M8.0 x 1.25 3.5 4.3 4.5 5.3 5.5 6.3 6.5 7.3 7.5 8.3
Body Lengths
Thread Size 15mm 16mm 17mm 18mm 19mm 20mm
Min Max Min Max Min Max Min Max Min Max Min Max
M5.0 x 0.8 10.6 11.4 11.6 12.4 12.6 13.4
M6.0 x 1.0 9.2 10.0 10.2 11.0 11.2 12.0 12.2 13.0 13.2 14.0
M8.0 x 1.25 8.5 9.3 9.5 10.3 10.5 11.3 11.5 12.3 12.5 13.3 13.5 14.3
9
Finish
Plain - None Black Zinc
Passivate MIL-F-14072-E300 Zinc QQ-Z-325, Type II,CL 3 - Clear Chromate
Caustic Etch Zinc QQ-Z-325, Type I,CL 3
Bright Dip - Brass Zinc QQ-Z-325, Type II,CL 3 - Yellow Chromate
Anodize MIL-A-8625C, Type I Electro Tin MIL-T-10727, Type I (Dull)
Chromic Hot Water Seal - Dark Grey Electro Tin MIL-T-10727 C, Type I (Bright)
Anodize MIL-A-8625C, Type II Electro Tin (Solder) MIL-F-14072 M222
Sulphuric Hot Water Seal - Clear Copper / Nickel / Bright Tin
Anodize MIL-A-8625C, Type II Black Oxide MIL-C-13924 - Steel
Sulphuric Dichromate Seal - Yellow Green Black Oxide MIL-F-495 - Brass
Anodize MIL-A-8625C - Black Black Oxide MIL-C-13924 - Stainless Steel
Iridite MIL-C-5541 - Clear Nickel QQ-N-290 CL 1, Type VI KC
Iridite MIL-C-5541 - Gold #14 Ductile Nickel
Cadmium QQ-P-416, CL 2 - Clear Chromate Electroless Nickel
Cadmium QQ-P-416, CL 2 - Color Chromate Silver QQ-S-365
Coarse Thread
K001 Amecoil Insert
Diameter Nominal Length FMP Order #
12 K001-242-0000 (*)
18 K001-243-0000 (*)
24 K001-244-0000 (S)
M24
36 K001-245-0000 (S)
48 K001-246-0000 (S)
60 K001-247-0000 (S)
13.5 K001-272-0000 (*)
20.3 K001-273-0000 (*)
M27 27 K001-274-0000 (S)
40.5 K001-275-0000 (S)
54 K001-276-0000 (S)
15 K001-302-0000 (*)
22.5 K001-303-0000 (*)
M30 30 K001-304-0000 (S)
45 K001-305-0000 (S)
60 K001-306-0000 (*)
16.5 K001-332-0000 (*)
24 K001-333-0000 (*)
M33 33 K001-334-0000 (*)
49.5 K001-335-0000 (S)
66 K001-336-0000 (*)
18 K001-362-0000 (*)
27 K001-363-0000 (*)
M36 36 K001-364-0000 (S)
54
72
K001-365-0000 (S)
K001-366-0000 (*)
9
29.3 K001-393-0000 (*)
39 K001-394-0000 (*)
M39
58.5 K001-395-0000 (*)
78 K001-396-0000 (*)
31.5 K001-423-0000 (*)
42 K001-424-0000 (*)
M42
63 K001-425-0000 (S)
84 K001-426-0000 (*)
33.8 K001-453-0000 (*)
45 K001-454-0000 (*)
M45
67.5 K001-455-0000 (*)
90 K001-456-0000 (*)
9.1.1 - 10 - FMP
Metric Diameter Nominal Length FMP Order #
Amecoil Inserts 7 K001-142-1.25 (S)
10.5 K001-143-1.25 (S)
Stainless Steel 14 K001-144-1.25 (S)
M14x1.25 18 K001-145-1.25 (S)
28 K001-146-1.25 (S)
Fine Thread 35 K001-147-1.25 (*)
K001 Amecoil Insert 42 K001-148-1.25 (*)
10.5 K001-143-01.5 (*)
Diameter Nominal Length FMP Order # 14 K001-144-01.5 (S)
8 K001-084-0001 (S) 18 K001-145-01.5 (S)
M14x1.5
12 K001-085-0001 (S) 28 K001-146-01.5 (S)
M8x1 16 K001-086-0001 (S) 35 K001-147-01.5 (S)
20 K001-087-0001 (S) 42 K001-148-01.5 (*)
24 K001-088-0001 (S) 12 K001-163-01.5 (*)
9 K001-094-0001 (S) 16 K001-164-01.5 (S)
13.5 K001-095-0001 (S) 24 K001-165-01.5 (S)
M16x1.5
M9 x 1 18 K001-096-0001 (S) 32 K001-166-01.5 (S)
22.5 K001-097-0001 (*) 40 K001-167-01.5 (S)
27 K001-098-0001 (*) 48 K001-168-01.5 (*)
10 K001-104-0001 (S) 9 K001-182-01.5 (S)
15 K001-105-0001 (S) 13.5 K001-183-01.5 (S)
M10 x 1 20 K001-106-0001 (S) 18 K001-184-01.5 (S)
M18x1.5
25 K001-107-0001 (S) 27 K001-185-01.5 (S)
30 K001-108-0001 (S) 36 K001-186-01.5 (S)
10 K001-104-1.25 (S) 45 K001-187-01.5 (S)
15 K001-105-1.25 (S) 9 K001-182-0002 (*)
M10x1.25 20 K001-106-1.25 (S) 13.5 K001-183-0002 (*)
25 K001-107-1.25 (S) 18 K001-184-0002 (S)
30 K001-108-1.25 (*) M18x2 27 K001-185-0002 (S)
11 K001-114-0001 (*) 36 K001-186-0002 (S)
M11x1 16.5 K001-115-0001 (S) 45 K001-187-0002 (S)
22 K001-116-0001 (*) 54 K001-188-0002 (*)
11 K001-114-1.25 (S) 10 K001-202-01.5 (*)
9 M11x1.25
16.5
22
K001-115-1.25 (S)
K001-116-1.25 (S) M20x1.5
15
20
K001-203-01.5 (*)
K001-204-01.5 (S)
27.5 K001-117-1.25 (*) 30 K001-205-01.5 (S)
33 K001-118-1.25 (*) 40 K001-206-01.5 (S)
12 K001-124-0001 (S) 10 K001-202-0002 (*)
18 K001-125-0001 (S) 15 K001-203-0002 (*)
M12x1 24 K001-126-0001 (S) 20 K001-204-0002 (S)
M20x2
30 K001-127-0001 (*) 30 K001-205-0002 (S)
36 K001-128-0001 (S) 40 K001-206-0002 (S)
12 K001-124-1.25 (S) 50 K001-207-0002 (S)
18 K001-125-1.25 (S) 11 K001-222-01.5 (*)
M12x1.25 24 K001-126-1.25 (S) 16.5 K001-223-01.5 (*)
30 K001-127-1.25 (S) 22 K001-224-01.5 (S)
M22x1.5
36 K001-128-1.25 (S) 33 K001-225-01.5 (S)
12 K001-124-01.5 (S) 44 K001-226-01.5 (S)
18 K001-125-01.5 (S) 55 K001-227-01.5 (S)
M12 x 1.5 24 K001-126-01.5 (S)
30 K001-127-01.5 (S)
36 K001-128-01.5 (S)
9.1.1 - 12 - FMP
UNC Nominal Length
Amecoil Inserts Diameter
Inch mm
FMP Order #
9.1.1 - 14 - FMP
UNF Nominal Length
Amecoil Inserts Diameter
Inch mm
FMP Order #
9.1.1 - 16 - FMP
Threaded Inserts
Press-In
Brass
For Thermosettings
TIP1 Press-In
d1 d2 L d4 Pilot Hole a min. FMP Order #
M2 3.45 4 3.1-3.2 2.4 TIP1-002-0040
M2.5 4.2 4.8 3.9-4 3.2 TIP1-2.5-0048
M3 4.2 4.8 3.9-4 3.2 TIP1-003-0048
M4 5.85 8 5.5-5.6 4 TIP1-004-0080
M5 6.6 9.5 6.3-6.4 4.8 TIP1-005-0095
M6 8.3 12.7 7.9-8 6 TIP1-006-0127
M8 9.9 12.7 9.5-9.6 7 TIP1-008-0127
*Please contact us for availability*
Threaded Inserts
Press-In
Brass
For Laminated Materials
TIP2 Press-In
Threaded Inserts
Press-In
Brass
For Thermoplastics
TIP3 Press-In
Press-In
Brass
Threaded Inserts
Press-In
Brass
For Thermoplastics and Thermosettings
TIP5 Press-In
d1 d2 L d4 Pilot Hole a FMP Order #
M2 3.4 4.1 3.1 1.6 TIP5-002-0041
M2.5 4.2 5.3 3.8 2 TIP5-2.5-0053
M3 4.2 5.3 3.8 2 TIP5-003-0053
M4 5.8 7.4 5.4 2.5 TIP5-004-0074
M5
M6
6.6
8.2
8.3
9.2
6.2
7.8
2.5
2.8
TIP5-005-0083
TIP5-006-0092 9
M8 9.7 9.2 9.3 3.8 TIP5-008-0092
*Please contact us for availability*
Threaded Inserts
Press-In
Brass
For Thermoplastics and Thermosetting Plastics
TIP6 Press-In
a
d1 d2 L d4 Pilot Hold FMP Order #
Thermoplastics Thermosettings
M2.5 4.5 4.8 4 2 3.2 TIP6-2.5-0048
M3 4.5 4.8 4 2 3.2 TIP6-003-0048
M4 6.1 7.9 5.6 2.8 4 TIP6-004-0079
M5 7 9.5 6.4 3.2 4.8 TIP6-005-0095
M6 8.6 12.7 7.9 4 6 TIP6-006-0127
M8 10.2 12.7 9.6 4.8 7 TIP6-008-0127
*Please contact us for availability*
9.1.1 - 18 - FMP
Threaded Inserts
Weld-In
Brass
For Ultrasonic Installation
TIW1 Weld-In
d4 Pilot Hole a
d1 d2 L FMP Order #
ABC PVC ABC PVC
M2 3.6 4 3.1 3.2 2 1.3 TIW1-002-0040
M2.5 4.6 5.8 3.9 4 2.3 1.6 TIW1-2.5-0058
M3 4.6 5.8 3.9 4 2.3 1.6 TIWI-003-0058
M3.5 5.4 7.2 4.7 4.8 2.5 1.8 TIW1-3.5-0072
M4 6.3 8.2 5.5 5.6 2.5 2.1 TIW1-004-0082
M5 7 9.5 6.3 6.4 2.7 3.3 TIW1-005-0095
M6 8.6 12.7 7.9 8 3 3.6 TIW1-006-0127
M8 10.2 12.7 9.5 9.6 3.5 4.5 TIW1-008-0127
*Please contact us for availability*
Threaded Inserts
Weld-In
Brass
For Thermal Installation
TIW2 Weld-In
d1 d2 L d4 Pilot Hole a FMP Order #
M3 4.4 5.8 4 1.76-2.2 TIW2-003-0058
*Please contact us for availability*
9
DIN 16903
Threaded Inserts
Brass
Form “E/G”
For Plastic Injection Molding
TR9E Form “E”
Form E Form G
TR9G Form “G” Closed, Short with Disc Closed, Long with Disc
9
DIN 16903
Threaded Inserts
Brass
Form “P/R”
For Plastic Injection Molding
TR9P Form “P” Form P Form R
TR9R Form “R” Closed, Short Closed, Long
9.1.1 - 20 - FMP
DIN 16903
Threaded Inserts
Brass
Form “B/D”
For Plastic Injection Molding
TR9B Form “B”
TR9D Form “D” Form B Form D
Open, Short Open, Long
d1 L1 h12 L2 h12 ~d2 d3 h11 a d4 h12
M2.5 2.6 4 3.8 3.8 0.8 3.4
M3 3 4.5 4.2 4.2 1 3.8
M3.5 3.5 5.5 5 5 1 4.5
M4 4 6 5.5 5.5 1 5
M5 5 7.5 7 7 1 6.4
M6 6 9 8 8 1 7.4
*Please contact us for availability*
DIN 16903
Threaded Inserts
Brass
Form “F/H”
For Plastic Injection Molding
TR9F Form “F”
TR9H Form “H” Form F Form H
Closed, Short with Disc Closed, Long with Disc
d1 L1 h14 L2 h14 L3 h12 L4 h12 ~d2 d3 h11 a d4 h12
M3 3 4.5 3.8 5.3 4.2 4.2 1 3.8
M4 4 6 5 7 5.5 5.5 1 5
M5 5 7.5 6 8.5 7 7 1 6.4
9 M6 6 9 7 10 8
*Please contact us for availability*
8 1 7.4
DIN 16903
Threaded Inserts
Brass
Form “Q/S”
For Plastic Injection Molding
TR9Q Form “Q”
TR9S Form “S” Form Q Form S
Closed, Short Closed, Long
d1 L1 h14 L2 h14 L3 h12 L4 h12 ~d2 d3 h11 a d4 h12
M2.5 2.6 4 4.6 6 3.8 3.8 0.8 3.4
M3 3 4.5 5.5 7 4.2 4.2 1 3.8
M3.5 3.5 5.5 6 8 5 5 1 4.5
M4 4 6 7 9 5.5 5.5 1 5
M5 5 7.5 8.3 10.8 7 7 1 6.4
M6 6 9 9.8 12.8 8 8 1 7.4
*Please contact us for availability*