Professional Documents
Culture Documents
Volume 20
Impact Sprinklers
Introduction
Impact Sprinklers
Volume 20
Impact Sprinklers
Introduction
25BPJ-FP-
ADJ-DA-TNT
Precision
Jet Brass No 30-50 • 38-41
35A-ADJ-
TNT Spoon Brass No 30-60 • 42-51
65PJ Precision
Jet Brass No 50-80 • 57-65
Volume 20
Impact Sprinklers
1/2 “ (13mm) Full Circle
Benefits
Straight Bore Nozzle (SBN-1) Performance* METRIC
• Wedge drive runs on smaller nozzles and
lower pressures NOZZLE SIZE (Stream Height: 1.8m)
• Self-flushing design reduces wear from grit 1.59 mm 1.70 mm 1.98 mm 2.38 mm 2.78 mm
(1/16”) (51 Drill) (5/64”) (3/32”) (7/64”)
• Corrosion and grit resistant bar@ Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow
Nozzle (m) (l/s) (m3/h) (m) (l/s) (m3/h) (m) (l/s) (m3/h) ((m) (l/s) (m3/h) (m) (l/s) (m3/h)
• Built to last 1.4 - - - 8.8 0.04 0.13 9.3 0.05 0.18 10.1 0.07 0.26 10.4 0.10 0.35
• Five-year Customer Satisfaction Policy 1.5 - - - 8.9 0.04 0.14 9.3 0.05 0.19 10.1 0.07 0.27 10.5 0.10 0.37
2.0 9.0 0.04 0.14 9.1 0.04 0.16 9.6 0.06 0.22 10.3 0.09 0.31 10.8 0.12 0.42
2.5 9.2 0.04 0.15 9.3 0.05 0.18 9.8 0.07 0.24 10.6 0.10 0.35 11.0 0.13 0.47
Specifications 3.0 9.4 0.05 0.17 9.6 0.05 0.19 10.1 0.07 0.27 10.8 0.11 0.38 11.4 0.14 0.52
3.5 9.6 0.05 0.18 9.8 0.06 0.21 10.4 0.08 0.29 11.0 0.11 0.41 11.6 0.16 0.56
• Bearing: 1/2" (13mm) Male NPT, Brass 4.0 9.8 0.05 0.20 10.0 0.06 0.22 10.5 0.08 0.31 11.2 0.12 0.44 11.7 0.17 0.60
• Trajectory Angle: 23° 4.1 9.9 0.06 0.20 10.1 0.06 0.23 10.5 0.09 0.31 11.3 0.12 0.45 11.7 0.17 0.61
• Operating Range: 20-60 psi (1.4-4.1 bar) * Available without Nozzle or Assembled with 5/64” (05) Straight Bore Nozzle.
All other Nozzles must be purchased separately.
• Flow Rate: .0.56-2.68 gpm (0.14-0.61 m3/h) See Chart below.
• Radius: 29-38 ft. (9.0-11.70 meters)
• Nozzle Port: 1/8” Female NPT
Volume 20
Impact Sprinklers
1/2 “ (13mm) Full Circle
20JH Straight Bore Nozzle (SBN-1) Performance* Straight Bore Nozzle with Vane (SBN-1V)*
1/2” (13mm) Full Circle, Brass Impact NOZZLE SIZE (Stream Height: 6 ft.) NOZZLE SIZE (Stream Height: 7 ft.)
Sprinkler 7/64” 1/8” 9/64” 5/32” 1/8” 9/64” 5/32”
psi @ Rad. Flow Rad. Flow Rad. Flow Rad. Flow psi @ Rad. Flow Rad. Flow Rad. Flow
• Durable brass die-cast arm Nozzle (ft.) (gpm) (ft.) (gpm) (ft.) (gpm) (ft.) (gpm) Nozzle (ft.) (gpm) (ft.) (gpm) (ft.) (gpm)
35 38 2.05 38 2.68 39 3.39 39 4.19 35 39 2.68 41 3.39 42 4.19
• Stainless steel springs and fulcrum pin 40 38 2.19 39 2.86 40 3.62 39 4.47 40 40 2.86 41 3.62 42 4.47
• Corrosion and grit resistant 45 39 2.32 39 3.03 40 3.84 40 4.73 45 40 3.03 42 3.84 42 4.73
50 39 2.45 39 3.20 40 4.05 40 5.00 50 41 3.20 42 4.05 43 5.00
Features 55 39 2.57 40 3.35 40 4.24 40 5.23 55 41 3.35 43 4.24 43 5.23
60 39 2.68 40 3.50 41 4.43 41 5.47 60 41 3.50 43 4.43 44 5.47
• Chemically resistant PTFE washers
Volume 20
Impact Sprinklers
3/4 “ (19mm) Full Circle
L36H
3/4” (19mm) Full Circle, Plastic, Low Angle
Impact Sprinkler L36H Quick-Fit Straight Bore Nozzle (QF-SBN-3) (Star Hole) Performance*
NOZZLE SIZE
• Durable Delrin™ plastic body and arm 5/32” 11/64” 3/16”
• Slotted spoon for larger nozzles psi@ Rad. Flow Rad. Flow Rad. Flow
Nozzle (ft.) (gpm) (ft.) (gpm) (ft.) (gpm)
Features 35 48 4.20 49 5.00 50 6.00
40 49 4.50 51 5.40 52 6.40
• Wide range of quick-fit nozzles 45 51 4.70 52 5.70 53 6.80
• Stainless steel springs and fulcrum pin 50 53 5.00 54 6.00 54 7.20
55 53 5.20 54 6.30 55 7.50
• Brass bearing sleeve 60 54 5.40 55 6.60 55 7.80
• Chemically resistant washers
• Dual nozzle ports
L36H Quick-Fit Straight Bore Nozzle (QF-SBN-3) (Star Hole) Performance* METRIC
Benefits
• Superior chemical and grit resistance NOZZLE SIZE
• Low angle fights strong wind conditions 3.97 mm 4.37 mm 4.76 mm
(5/32”) (11/64”) (3/16”)
• Great choice for pivot or under tree bar @ Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow
Nozzle (m) (l/s) (m3/h) (m) (l/s) (m3/h) (m) (l/s) (m3/h)
applications
2.4 14.8 0.26 0.95 15.1 0.32 1.14 15.2 0.38 1.36
• Easy maintenance 2.5 14.9 0.27 0.97 15.2 0.32 1.16 15.4 0.38 1.39
• Added design flexibility 3.0 15.5 0.29 1.05 15.9 0.35 1.27 16.1 0.42 1.52
3.5 16.2 0.32 1.14 16.5 0.38 1.37 16.6 0.46 1.65
• Built to last 4.0 16.4 0.34 1.21 16.7 0.41 1.47 16.9 0.48 1.74
• Two-year Customer Satisfaction Policy 4.1 16.5 0.34 1.23 16.8 0.42 1.50 16.9 0.49 1.77
• Bearing: 3/4" (19mm) Male NPT, Brass * Nozzles must be purchased separately. See Chart below.
• Trajectory Angle: 10°
• Operating Range: 20-60 psi (2.4-4.1 bar)
• Flow Rate: 4.2-7.8 gpm (0.95-1.77 m3/h)
• Radius: 48-55 ft. (14.8-16.9m)
• Nozzle Port: Plastic Quick-Fit
Volume 20
Impact Sprinklers
3/4 “ (19mm) Full Circle
Volume 20
Impact Sprinklers
3/4 “ (19mm) Full Circle
48H
Volume 20
Impact Sprinklers
3/4 “ (19mm) Full Circle
30H / 30WH Brass Straight Bore Nozzle (SBN-3) with Brass Straight Bore Nozzle (SBN-3) with
3/4” (19mm) Full Circle, Brass Impact
Plug Performance* Spreader (LAN-1) Performance*
Sprinkler NOZZLE SIZE (Stream Height: 9 ft.) NOZZLE SIZE (Stream Height: 9 ft.)
9/64” 5/32” 11/64” 3/16” 3/16”
9/64” 5/32” 11/64” 3/16” x 3/32-7˚ x 3/32-7˚ x 3/32-7˚ x 3/32-7˚ x 1/8-20˚
• Heavy duty brass construction
psi@ Rad. Flow Rad. Flow Rad. Flow Rad. Flow psi@ Rad. Flow Rad. Flow Rad. Flow Rad. Flow Rad. Flow
• Stainless steel springs and fulcrum pin Nozzle (ft.) (gpm) (ft.) (gpm) (ft.) (gpm) (ft.) (gpm) Nozzle (ft.) (gpm) (ft.) (gpm) (ft.) (gpm) (ft.) (gpm) (ft.) (gpm)
• Chemically resistant washers 25 40 2.90 41 3.50 41 4.30 42 5.10 25 40 4.20 41 4.80 41 5.60 42 6.40 42 7.40
30 40 3.10 42 3.90 44 4.70 45 5.60 30 40 4.60 42 5.30 44 6.10 45 7.00 45 8.10
35 41 3.40 43 4.20 45 5.10 47 6.00 35 41 4.90 43 5.70 45 6.60 47 7.50 47 8.70
Features 40 41 3.60 44 4.50 46 5.40 48 6.40 40 41 5.20 44 6.10 46 7.00 48 8.10 48 9.30
45 42 3.80 44 4.70 46 5.70 49 6.80 45 42 5.60 44 6.50 46 7.40 49 8.50 49 9.90
• Dual nozzle ports 50 42 5.90 45 6.80 47 7.90 50 9.00 50 10.40
50 42 4.10 45 5.00 47 6.10 50 7.20
• 30H unit does not have a spreader plug 55 43 4.20 45 5.20 48 6.30 50 7.60 55 43 6.10 45 7.10 48 8.20 50 9.40 50 10.90
60 43 4.40 46 5.50 48 6.60 51 7.90 60 43 6.40 46 7.40 48 8.60 51 9.90 51 11.40
• 30WH unit has spreader plug 65 44 4.60 46 5.80 49 6.90 51 8.20 65 44 6.70 46 7.80 49 8.90 51 10.20 51 11.80
70 44 4.80 47 5.90 49 7.20 52 8.50 70 44 6.90 47 8.10 49 9.30 52 10.70 52 12.30
Benefits 75 45 5.00 47 6.10 50 7.40 52 8.80 75 45 7.20 47 8.30 50 9.60 52 11.00 52 12.70
80 45 5.10 48 6.30 50 7.70 53 9.10 80 45 7.50 48 8.70 50 10.00 53 11.50 53 13.10
• Wide range of flow rates
• Corrosion and grit resistant Brass Straight Bore Nozzle with Vane Brass Straight Bore Nozzle with vane (SBN-3v)
• Built to last (SBN-3V) with Plug Performance* with Spreader (LAN-1) Performance*
• Five-year Customer Satisfaction Policy NOZZLE SIZE (Stream Height: 10 ft.) NOZZLE SIZE (Stream Height: 10 ft.)
9/64” 5/32” 11/64” 3/16” 3/16”
Specifications 9/64” 5/32” 11/64” 3/16” x 3/32-7˚ x 3/32-7˚ x 3/32-7˚ x 3/32-7˚ x 1/8-20˚
psi@ Rad. Flow Rad. Flow Rad. Flow Rad. Flow psi@ Rad. Flow Rad. Flow Rad. Flow Rad. Flow Rad. Flow
• Bearing: 3/4" (19mm) Male NPT, Brass Nozzle (ft.) (gpm) (ft.) (gpm) (ft.) (gpm) (ft.) (gpm) Nozzle (ft.) (gpm) (ft.) (gpm) (ft.) (gpm) (ft.) (gpm) (ft.) (gpm)
• Trajectory Angle: 27˚ 25 42 2.90 44 3.50 45 4.30 48 5.10 25 42 4.20 44 4.80 45 5.60 45 6.40 46 7.40
• Operating Range: 25-80 psi (1.7-5.5 bar) 30 43 3.10 45 3.90 46 4.70 47 5.60 30 43 4.60 45 5.30 46 6.10 47 7.00 47 8.10
• Flow Rate: 2.9-13.1 gpm (0.66-2.98 m3/h) 35 44 3.40 46 4.20 47 5.10 49 6.00 35 44 4.90 46 5.70 47 6.60 49 7.50 49 8.70
40 45 3.60 47 4.50 48 5.40 50 6.40 40 45 5.20 47 6.10 48 7.00 50 8.10 50 9.30
• Radius: 40-56 ft. (12.20-17.23 meters) 45 46 3.80 48 4.70 49 5.70 52 6.80 45 46 5.60 48 6.50 49 7.40 52 8.50 52 9.90
• Nozzle Port: 1/8” Female NPT 50 46 4.10 49 5.00 50 6.10 53 7.20 50 46 5.90 49 6.80 50 7.90 53 9.00 53 10.40
• Spreader Nozzle Port: 1/8” Female NPT 55 47 4.20 50 5.20 51 6.30 53 7.60 55 47 6.10 50 7.10 51 8.20 54 9.40 54 10.90
60 47 4.40 50 5.50 51 6.60 54 7.90 60 47 6.40 50 7.40 51 8.60 54 9.90 54 11.40
65 48 4.60 51 5.80 52 6.90 55 8.20 65 48 6.70 51 7.80 52 8.90 55 10.20 55 11.80
70 48 4.80 51 5.90 53 7.20 55 8.50 70 48 6.90 51 8.10 53 9.30 55 10.70 55 12.30
75 49 5.00 52 6.10 54 7.40 56 8.80 75 49 7.20 52 8.30 54 9.60 56 11.00 56 12.70
80 50 5.10 52 6.30 55 7.70 56 9.10 80 50 7.50 52 8.70 55 10.00 56 11.50 56 13.10
* Nozzles must be purchased separately. See chart below.
Volume 20
Impact Sprinklers
3/4 “ (19mm) Full Circle
30H / 30WH
30H Brass Straight Bore Nozzle (SBN-3) METRIC 30H Brass Straight Bore Nozzle (SBN-3) METRIC
with Plug * with Spreader (LAN-1*)
NOZZLE SIZE (Stream Height: 1.1m) NOZZLE SIZE (Stream Height: 1.1m)
3.57 MM 3.97 MM 4.37 MM 4.76 MM 3.57 mm x 2.38 mm 3.97 mm x 2.38 mm 4.37 mm x 2.38 mm 4.76 mm x 2.38 mm 4.76 mm x 3.18 mm
(9/64”) (5/32”) (11/64”) (3/16”) (9/64” x 3/32”) 7° (5/32” x 3/32”) 7° (11/64” x 3/32”) 7° (3/16” x 3/32”) 7° (3/16” x 1/8”) 20°
bar @ Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow bar @ Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow
Nozzle (m) (l/s) (m3/h) (m) (l/s) (m3/h) (m) (l/s) (m3/h) (m) (l/s) (m3/h) Nozzle (m) (l/s) (m3/h) (m) (l/s) (m3/h) (m) (l/s) (m3/h) (m) (l/s) (m3/h) (m) (l/s) (m3/h)
1.7 12.2 0.18 0.66 12.5 0.22 0.79 12.6 0.27 0.98 13.0 0.32 1.16 1.7 12.2 0.26 0.95 12.5 0.30 1.09 12.6 0.35 1.27 13.0 0.40 1.45 13.0 0.47 1.68
2.0 12.3 0.19 0.69 12.9 0.24 0.87 13.3 0.29 1.05 13.7 0.35 1.25 2.0 12.3 0.29 1.03 12.9 0.33 1.18 13.3 0.38 1.36 13.7 0.43 1.56 13.7 0.50 1.81
2.5 12.5 0.22 0.78 13.3 0.27 0.97 13.8 0.33 1.18 14.4 0.38 1.39 2.5 12.5 0.31 1.13 13.3 0.37 1.32 13.8 0.42 1.52 14.4 0.48 1.74 14.4 0.56 2.01
3.0 12.8 0.24 0.85 13.5 0.29 1.05 14.1 0.35 1.27 14.8 0.42 1.52 3.0 12.8 0.35 1.24 13.5 0.40 1.45 14.1 0.46 1.65 14.8 0.53 1.90 14.8 0.61 2.21
3.5 13.0 0.26 0.93 13.7 0.32 1.14 14.5 0.39 1.39 15.3 0.46 1.65 3.5 13.0 0.37 1.35 13.7 0.43 1.55 14.5 0.50 1.80 15.3 0.57 2.06 15.3 0.66 2.38
4.0 13.2 0.27 0.98 14.0 0.34 1.22 14.7 0.41 1.47 15.5 0.49 1.77 4.0 13.2 0.40 1.43 14.0 0.46 1.65 14.7 0.53 1.92 15.5 0.61 2.20 15.5 0.71 2.54
4.5 13.4 0.29 1.05 14.2 0.37 1.32 14.9 0.44 1.57 15.7 0.52 1.87 4.5 13.4 0.42 1.52 14.2 0.49 1.77 14.9 0.56 2.03 15.7 0.64 2.32 15.7 0.75 2.69
5.0 13.6 0.31 1.11 14.4 0.38 1.36 15.2 0.46 1.66 15.9 0.55 1.96 5.0 13.6 0.44 1.60 14.4 0.52 1.86 15.2 0.60 2.15 15.9 0.68 2.46 15.9 0.79 2.84
5.5 13.9 0.32 1.16 14.6 0.40 1.43 15.4 0.49 1.75 16.2 0.57 2.07 5.5 13.9 0.47 1.70 14.6 0.55 1.98 15.4 0.63 2.27 16.2 0.73 2.61 16.2 0.83 2.98
30H Brass Straight Bore Nozzle (SBN-3) METRIC 30H Brass Straight Bore Nozzle (SBN-3) METRIC
with Plug * with Spreader (LAN-1*)
NOZZLE SIZE (Stream Height: 3m) NOZZLE SIZE (Stream Height: 3m)
3.57 MM 3.97 MM 4.37 MM 4.76 MM 3.57 mm x 2.38 mm 3.97 mm x 2.38 mm 4.37 mm x 2.38 mm 4.76 mm x 2.38 mm 4.76 mm x 3.18 mm
(9/64”) (5/32”) (11/64”) (3/16”) (9/64” x 3/32”) 7° (5/32” x 3/32”) 7° (11/64” x 3/32”) 7° (3/16” x 3/32”) 7° (3/16” x 1/8”) 20°
bar @ Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow bar @ Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow
Nozzle (m) (l/s) (m3/h) (m) (l/s) (m3/h) (m) (l/s) (m3/h) (m) (l/s) (m3/h) Nozzle (m) (l/s) (m3/h) (m) (l/s) (m3/h) (m) (l/s) (m3/h) (m) (l/s) (m3/h) (m) (l/s) (m3/h)
1.7 13.0 0.18 0.66 13.4 0.22 0.79 13.7 0.27 0.98 14.0 0.32 1.16 1.7 13.0 0.26 0.95 13.4 0.30 1.09 13.9 0.35 1.27 13.9 0.40 1.45 13.9 0.47 1.68
2.0 13.2 0.19 0.69 13.7 0.24 0.87 14.0 0.29 1.05 14.4 0.35 1.25 2.0 13.2 0.29 1.03 13.7 0.33 1.18 14.0 0.38 1.36 14.4 0.43 1.56 14.4 0.50 1.81
2.5 13.6 0.22 0.78 14.1 0.27 0.97 14.4 0.33 1.18 15.0 0.38 1.39 2.5 13.6 0.31 1.13 14.1 0.37 1.32 14.4 0.42 1.52 15.0 0.48 1.74 15.0 0.56 2.01
3.0 14.0 0.24 0.85 14.5 0.29 1.05 14.8 0.35 1.27 15.7 0.42 1.52 3.0 14.0 0.35 1.24 14.5 0.40 1.45 14.8 0.46 1.65 15.7 0.53 1.90 15.7 0.61 2.21
3.5 14.2 0.26 0.93 15.0 0.32 1.14 15.3 0.39 1.39 16.2 0.46 1.65 3.5 14.2 0.37 1.35 15.0 0.43 1.55 15.3 0.50 1.80 16.2 0.57 2.06 16.2 0.66 2.38
4.0 14.4 0.27 0.98 15.3 0.34 1.22 15.6 0.41 1.47 16.5 0.49 1.77 4.0 14.4 0.40 1.43 15.3 0.46 1.65 15.6 0.53 1.92 16.5 0.61 2.20 16.5 0.71 2.54
4.5 14.6 0.29 1.05 15.6 0.37 1.32 15.9 0.44 1.57 16.8 0.52 1.87 4.5 14.6 0.42 1.52 15.6 0.49 1.77 15.9 0.56 2.03 16.8 0.64 2.32 16.8 0.75 2.69
5.0 14.9 0.31 1.11 15.8 0.38 1.36 16.3 0.46 1.66 17.0 0.55 1.96 5.0 14.9 0.44 1.60 15.8 0.52 1.86 16.3 0.60 2.15 17.0 0.68 2.46 17.0 0.79 2.84
5.5 15.2 0.32 1.16 16.0 0.40 1.43 16.8 0.49 1.75 17.2 0.57 2.07 5.5 15.2 0.47 1.70 16.0 0.55 1.98 16.8 0.63 2.27 17.2 0.73 2.61 17.2 0.83 2.98
Volume 20
Impact Sprinklers
3/4 “ (19mm) Full Circle
30FH / 30FWH Straight Bore Nozzle (SBN-3) Straight Bore Nozzle (SBN-3) with
Performance* Spreader (LAN-1-20) Performance*
3/4” (19mm) Full Circle, Brass Impact Sprinkler
NOZZLE SIZE (Stream Height: 9 ft.) NOZZLE SIZE (Stream Height: 9 ft.)
• Heavy duty brass construction 1/8" 1/8"
x 3/32-20˚
• Stainless steel springs and fulcrum pin psi@ Rad. Flow psi@ Rad. Flow
Nozzle (ft.) (gpm) Nozzle (ft.) (gpm)
• Chemically resistant, PTFE washers
25 39 2.26 25 39 3.52
30 39 2.48 30 39 3.87
Features 35 40 2.68 35 40 4.19
40 40 2.86 40 40 4.49
• Dual nozzle ports 45 41 3.03 45 41 4.77
50 41 3.20 50 41 5.02
Benefits 55 42 3.35 55 42 5.27
60 44 3.50 60 42 5.51
• PTFE washers allow for faster rotation times 65 43 3.65 65 43 5.75
with a smaller nozzle at lower pressures 70 43 3.78 70 43 5.99
• Wide range of flow rates 75 43 3.91 75 43 6.23
80 43 4.04 80 43 6.47
• Corrosion and grit resistant
• Built to last Straight Bore Nozzle (SBN-3) Straight Bore Nozzle (SBN-3)
• Five-year Customer Satisfaction Policy with Spreader (LAN-1-20) * with Spreader (LAN-1-20) * METRIC
NOZZLE SIZE (Stream Height: 2.7m) NOZZLE SIZE (Stream Height: 2.7m)
Specifications 3.18 mm 3.18 mm x 2.38 mm
(1/8”) (1/8” x 3/32”) 20°
• Bearing: 3/4" (19mm) Male NPT, Brass psi@ psi@
Rad. Flow Flow Rad. Flow Flow
• Trajectory Angle: 27° Nozzle (m) (l/s) (m3/h) Nozzle (m) (l/s) (m3/h)
1.7 11.9 0.14 0.51 1.7 11.9 0.22 0.80
• Operating Range: 25-80 psi (1.7-5.5 bar) 2.0 12.0 0.15 0.55 2.0 12.0 0.24 0.86
• Flow Rate: 2.26-6.47 gpm (0.51-1.47 m3/h) 2.5 12.2 0.17 0.62 2.5 12.2 0.27 0.97
3.0 12.5 0.19 0.68 3.0 12.5 0.30 1.06
• Radius: 39-43 ft. (11.90-13.27 meters) 3.5 12.7 0.20 0.73 3.5 12.7 0.32 1.15
• Nozzle Port: 1/4” Female NPT 4.0 12.9 0.22 0.78 4.0 12.9 0.34 1.23
4.5 13.1 0.23 0.83 4.5 13.1 0.36 1.31
• Spreader Nozzle Port: 1/8” Female NPT 5.0 13.2 0.24 0.87 5.0 13.2 0.39 1.39
5.5 13.3 0.25 0.92 5.5 13.3 0.41 1.47
Volume 20
Impact Sprinklers
1 “ (25mm) Full Circle
Volume 20
Impact Sprinklers
1 “ (25mm) Full Circle
70CH
Straight Bore Nozzle (SBN-4) with Plug Performance* METRIC
NOZZLE SIZE (Stream Height: 2.4m)
Volume 20
Impact Sprinklers
1/2 “ (13mm) Full or Part Circle
Features
• Chemically resistant washers Straight Bore Nozzle (SBN-1) Performance* METRIC
• All models include integral (to sprinkler body) NOZZLE SIZE (Stream Height: 2.1m)
Specifications
• Bearing: 1/2" (13mm) Male NPT, Brass
• Trajectory Angle: 25°
• Operating Range: 30-50 psi (2.1-3.5 bar)
• Flow Rate: 3.1-5.0 gpm (0.7-1.14 m3/h)
• Radius: 38-41 ft. (11.6-12.5 meters)
• Nozzle Port: 1/8” Female NPT
25BPJ-FP-ADJ-DA-TNT w/SBN-1
5/32” 3.57mm A34403-10
Volume 20
Impact Sprinklers
1/2 “ (13mm) Full or Part Circle
2045-PJ Straight Bore Nozzle (SBN-1) Performance* Low Angle Nozzle (LAN-1)
1/2” (13mm) Full or Part Circle, Plastic NOZZLE SIZE (Stream Height: 6 ft.) NOZZLE SIZE (Stream Height: 3 ft.)
Impact Sprinkler 3/32” 7/64” 1/8” 5/32” 3/16” 7/64” 5/32”
Red Black Blue Yellow Beige Black Yellow
• Durable Delrin™ plastic, body arm, psi@ Rad. Flow Rad. Flow Rad. Flow Rad. Flow Rad. Flow psi@ Rad. Flow Rad. Flow
bearing sleeve, nipple and break up pin Nozzle (ft.) (gpm) (ft.) (gpm) (ft.) (gpm) (ft.) (gpm) (ft.) (gpm) Nozzle (ft.) (gpm) (ft.) (gpm)
25 - - 32 2.20 35 2.80 38 4.20 39 5.50 25 22 1.5 25 3.4
• Stainless steel springs and 35 37 2.00 37 2.70 38 3.30 41 4.80 42 6.30 35 23 1.9 29 4.0
fulcrum pin 45 38 2.30 39 3.00 40 3.70 42 5.40 44 7.10 45 25 2.1 31 4.0
55 38 2.50 41 3.30 41 4.10 43 6.00 45 7.90 55 25 2.3 32 5.0
• Chemically resistant washers 60 38 2.60 41 3.50 42 4.20 44 6.40 45 8.40 60 25 2.4 32 5.4
* Shipped Assembled with a 1/8” (08) Straight Bore Nozzle.
Features
• Plastic Quick Fit Nozzles
• Low Angle (10°) Nozzles available Straight Bore Nozzle (SBN-1) Performance* METRIC
• Integral straightening vane for greater
NOZZLE SIZE (Stream Height: 1.8m)
distance
2.38 mm 2.78 mm 3.18 mm 3.97 mm 4.76 mm
• Full or Part Circle operation (3/32”) Red (7/64”) Black (1/8”) Blue (5/32”) Yellow (3/16”) Beige
bar @ Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow
Nozzle (m) (l/s) (m3/h) (m) (l/s) (m3/h) (m) (l/s) (m3/h) (m) (l/s) (m /h) (m) (l/s) (m3/h)
3
Benefits
1.7 - - - 9.8 0.14 0.5 10.7 0.18 0.64 11.6 0.26 0.95 11.9 0.35 1.25
• Superior chemical and grit resistance 2.0 - - - 10.4 0.15 0.55 11.0 0.19 0.68 11.9 0.28 1.01 12.3 0.37 1.32
2.5 11.3 0.13 0.46 11.4 0.17 0.62 11.7 0.21 0.76 12.5 0.31 1.11 12.9 0.40 1.45
• Smooth rotation at lower pressures 3.0 11.5 0.14 0.51 11.8 0.19 0.67 12.1 0.23 0.83 12.8 0.34 1.21 13.3 0.44 1.59
• Design flexibility 3.5 11.6 0.15 0.55 12.2 0.20 0.72 12.4 0.25 0.89 13.0 0.36 1.30 13.6 0.48 1.72
4.0 11.6 0.16 0.58 12.5 0.22 0.78 12.7 0.26 0.94 13.3 0.39 1.42 13.7 0.52 1.86
• Built to last 4.1 11.6 0.16 0.59 12.5 0.22 0.79 12.8 0.26 0.95 13.4 0.40 1.45 13.7 0.53 1.91
• Two-year Customer Satisfaction Policy
Volume 20
Impact Sprinklers
3/4 “ (19mm) Full or Part Circle
Specifications
• Bearing: 3/4" (19mm) Male NPT, Brass
• Trajectory Angle: 27°
• Operating Range: 30-60 psi
(2.1-4.1 bar)
• Flow Rate: 3.9-7.8 gpm (0.89-1.77 m3/h)
• Radius: 42-51 ft. (12.8-15.5 meters)
• Nozzle Port: 1/4” Female NPT
Volume 20
Impact Sprinklers
1 “ (25mm) Full or Part Circle
65PJ Adjustable Straight Bore Nozzle Adjustable Straight Bore Nozzle METRIC
1” (25mm) Full or Part Circle, Brass Impact
(ADJN-4) Performance (ADJN-4) Performance
Sprinkler NOZZLE SIZE (Stream Height: 9.5 - 14 ft.) NOZZLE SIZE (Stream Height: 2.9 - 4.3 m)
1/4” 6.35 mm
(1/4”)
• Heavy duty brass construction psi@
Nozzle
Rad.
(ft.)
Flow
(gpm) bar @ Rad. Flow Flow
• 1” Female NPT Bearing Nozzle (m) (l/s) (m3/h)
50 57 12.90
55 57 13.60 3.5 17.4 0.82 2.93
• “Precision jet” (PJ) arm
60 58 14.20 4.0 17.9 0.88 3.16
65 62 14.80 4.5 18.5 0.93 3.37
Features 70 63 15.40 5.0 19.2 0.99 3.55
75 64 16.00
• Stainless steel springs and fulcrum pin 80 65 16.50 5.5 19.8 1.04 3.75
• Chemically resistant washers
Available without Nozzle or assembled with a
• ADJN-4 Nozzles include integral to Nozzle 1/4” (16) Straight Bore Nozzle.
break-up pin
• Full or Part Circle operation
Benefits
• PJ arm reduces side splash
• Many options provide design and
application flexibility
• Corrosion and grit resistant
• Built to last
• Five-year Customer Satisfaction Policy
Specifications
• Bearing: 1" (25mm) Female NPT, Brass
• Trajectory Angle: 27°
• Operating Range: 50-80 psi (3.5-5.5 bar)
• Flow Rate: 12.9-16.5 gpm (2.93-3.75 m3/h)
• Radius: 57-65 ft. (17.4-19.8 meters)
• Nozzle Port: 3/8” Female NPT
65PJ-ADJ-TNT A4200316
Volume 20
Impact Sprinklers
1 1/4 “ (32mm) Full or Part Circle
85EHD Tough Bird® Straight Bore Nozzle (SBN-5) with Plug Performance*
1 1/4” (32mm) Full or Part Circle, NOZZLE SIZE (Stream Height: 14 ft.)
Brass Impact Sprinklers 11/32” 3/8” 13/32” 7/16” 15/32” 1/2” 17/32” 9/16” 5/8” 11/16”
psi@ Rad. Flow Rad. Flow Rad. Flow Rad. Flow Rad. Flow Rad. Flow Rad. Flow Rad. Flow Rad. Flow Rad. Flow
• Heavy duty brass construction Nozzle (ft.) (gpm) (ft.) (gpm) (ft.) (gpm) (ft.) (gpm) (ft.) (gpm) (ft.) (gpm) (ft.) (gpm) (ft.) (gpm) (ft.) (gpm) (ft.) (gpm)
• Stainless steel wear buttons, springs 25 61 17.10 62 20.30 64 23.40 66 26.70 66 30.30 66 33.80 66 37.10 66 42.30 66 51.50 66 61.90
30 64 18.80 65 22.30 68 25.70 69 29.30 72 33.20 73 37.10 73 40.80 73 46.40 73 56.50 73 68.10
and fulcrum pin 35 67 20.30 68 24.10 72 27.80 74 31.70 77 35.90 79 40.10 79 44.10 79 50.20 79 61.10 79 73.80
• Locking stainless steel trip collars 40 69 21.80 71 25.80 75 29.70 77 33.90 80 38.50 83 42.90 83 47.20 86 53.70 86 65.40 86 79.20
45 71 23.10 73 27.40 77 31.60 79 36.00 82 40.80 85 45.60 88 50.10 90 57.10 92 69.50 92 84.20
50 73 24.40 75 28.90 79 33.30 81 38.00 84 43.10 87 48.10 90 52.90 94 60.20 95 73.30 97 88.90
Features 55 75 25.50 77 30.30 81 34.90 83 39.70 86 45.30 89 50.30 92 55.60 96 63.20 99 77.30 100 93.50
• Chemically resistant washers 60 77 25.80 79 30.80 83 35.90 86 41.60 88 47.40 91 53.00 94 58.80 97 65.50 101 80.10 104 97.80
65 79 26.90 81 32.00 84 37.40 87 43.30 90 49.90 93 55.30 96 61.20 99 69.40 102 84.40 106 102.00
• Full or Part Circle operation 70 81 28.10 83 33.30 86 38.90 89 45.10 91 51.40 94 57.50 98 63.50 101 72.20 104 87.80 108 106.00
75 82 29.20 84 34.50 87 40.30 90 46.80 93 53.30 96 59.60 99 65.80 102 74.90 105 91.00 109 109.90
80 83 30.40 86 35.70 89 41.80 92 48.40 94 55.10 97 61.60 101 68.10 104 77.50 107 94.10 110 113.70
Benefits 85 85 31.50 87 37.00 90 43.20 93 50.00 96 56.90 99 63.50 102 70.30 105 80.00 108 97.10 112 117.30
• Internal straightening vane increases 90 86 32.70 89 38.30 92 44.60 95 51.50 97 58.50 100 65.30 104 72.40 106 82.20 110 99.90 113 120.90
95 87 33.90 90 39.50 93 46.00 96 53.00 98 60.00 101 67.10 105 74.40 108 84.30 111 102.60 115 124.30
distance of throw 100 88 34.00 91 40.70 94 47.40 97 54.50 99 61.50 102 68.90 106 76.40 109 87.20 112 105.20 116 127.70
• Stainless steel buttons protect trip
mechanism from wear
• Corrosion and grit resistant
Straight Bore Nozzle (SBN-5) and Spreader
• Built to last (LAN-1-20) Performance*
• Five-year Customer Satisfaction Policy
NOZZLE SIZE (Stream Height: 14 ft.)
Volume 20
Impact Sprinklers
1 1/4 “ (32mm) Full or Part Circle
8.7 mm x 5.56 mm 9.5 mm x 5.56 mm 10.3 mm x 5.56 mm 11.1 mm x 5.56 mm 11.9 mm x 5.56 mm
(11/32” x 7/32”) 20° (3/8” x 7/32”) 20° (13/32” x 7/32”) 20° (7/16” x 7/32”) 20° (15/32” x 7/32”) 20°
bar @ Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow
Nozzle (m) (l/s) (m3/h) (m) (l/s) (m3/h) (m) (l/s) (m3/h) (m) (l/s) (m3/h) (m) (l/s) (m3/h)
1.7 18.6 1.47 5.29 18.9 1.67 6.02 19.5 1.87 6.72 20.1 2.08 7.47 20.1 2.30 8.27
2.0 19.3 1.59 5.71 19.6 1.80 6.49 20.5 2.01 7.23 20.8 2.24 8.05 21.6 2.48 8.92
2.5 20.6 1.78 6.40 21.0 2.02 7.25 22.2 2.25 8.11 22.8 2.50 9.01 23.7 2.78 10.00
3.0 21.5 1.95 7.02 22.1 2.21 7.96 23.3 2.47 8.90 23.9 2.75 9.90 24.8 3.05 10.97
3.5 22.3 2.11 7.60 22.9 2.40 8.63 24.2 2.68 9.63 24.8 2.97 10.71 25.7 3.30 11.88
4.0 23.2 2.26 8.14 23.8 2.57 9.25 25.1 2.88 10.37 25.8 3.19 11.48 26.6 3.54 12.76
4.5 24.1 2.40 8.65 24.7 2.73 9.83 25.6 3.07 11.06 26.5 3.40 12.24 27.4 3.78 13.60
5.0 24.8 2.56 9.21 25.4 2.89 10.40 25.5 3.24 11.67 27.3 3.59 12.92 28.0 3.99 14.35
5.5 25.3 2.68 9.65 26.2 3.04 10.95 27.0 3.42 12.31 28.0 3.78 13.60 28.6 4.20 15.12
6.0 26.0 2.81 10.12 26.8 3.18 11.45 27.7 3.58 12.89 28.6 3.96 14.25 29.4 4.39 15.79
6.5 26.5 2.93 10.55 27.4 3.33 11.98 28.3 3.74 13.48 29.2 4.13 14.88 29.8 4.57 16.46
6.9 26.8 3.02 10.88 27.7 3.44 12.38 28.7 3.86 13.90 29.6 4.26 15.33 30.2 4.72 16.99
Volume 20