Professional Documents
Culture Documents
pack installation
guide by
1
PART I. DISABLE ANTIVIRUS AND FIREWALL
Create new folder on your Windows 10 or Windows 11 desktop (Windows 7 is not supported):
Open Windows Defender and disable protection (if you have other antivirus app, disable there also):
2
Disable Real-time protection:
3
Add New folder to Exclusions:
4
e
5
PART II. INSTALLATION
1. Download Featureinstaller APP from MEGA
Open the link https://mega.nz/folder/PQ8ihaSK#mifSYy5C2c3NdTb4D7tfiQ/folder/aVkExahI
and download all the files. FeatureInstaller lets you install and restore to original your BMW
EVO features.
6
2. Prepare the car and connection between laptop and the car.
Plug your ENET cable to the car. Turn IGNITION ON or START the engine.
7
Go to LAN connections. Set your IPv4 on auto assign IP. ENET cable will auto assign IP..
8
Press Find Vehicle. Your car VIN should appear if connection to the car is properly set.
Press Identify. Car details will be loaded on the right side of the window.
9
Press Start.
Bluescreen will appear, no worries, wait untill process is fully finished successfully.
10
4. Check if new features work
a) Go to Communications > Manage mobile devices > Delete all phones.
b) On your iPhone go to Bluetooth menu and delete the car connection.
c) On iPhone Enable SIRI, Wi-Fi and Bluetooth and make sure that your
iPhone is not connected to other Wi-Fi network.
d) Restart your navigation unit by holding down the volume button for
30 seconds.
After restart go to Communication > Manage Mobile Devices > Connect new device > Apple CarPlay:
11
5. Restore to Original from backup.
Do this before official BMW service appointment, ask if they plan to upgrade your iLevel
version: if NO - SKIP this. If YES - follow the steps:
a) Ignition ON / Start the car
b) Open FeatureInstaller and enter your CODE
c) Find Vehicle > Identify
d) You will be asked if you want to restore from the backup > Choose YES
e) Wait 5-10 min till all 3 phases are finished.
f) Done.
Q: While running FeatureInstaller, connection was interrupted, loading was NOT successful, stuck with
bluescreen.
A: Load FeatureInstaller again, when asked if you want to load from backup, choose Yes. Wait till procedure is
finished. Run all procedure again from Step1. Make sure internet connection is stable.
12