You are on page 1of 3

MasterPozzolith® 384

Low dosage retarding and plasticizing admixture for concrete

DESCRIPTION STANDARDS
MasterPozzolith 384 is a liquid admixture which acts on ASTM C-494: Types A, B and D.
the cement particles in the mix, combining the effects of BS EN 934-2
a powerful plasticizer and deflocculating agent with
controlled retardation. DIRECTIONS FOR USE
MasterPozzolith 384 should be added to the concrete
TYPICAL APPLICATIONS mix during the mixing cycle at the same time as the
- Hot weather concreting where controlled delay to water or the aggregate. Never add MasterPozzolith 384
initial set is of prime importance. to the dry cement. No extension to normal mixing times
- Ready mix concrete where workability retention is necessary.
coupled with retardation of initial set are beneficial.
- To improve cohesion, workability and compaction in DOSAGE
concretes using poorly graded /shaped fine Trials should be conducted to determine the optimum
aggregates. addition rates of MasterPozzolith 384, depending on mix
- Large slabs or bridge decks, etc. where extension of design proposed and mix performance requirements. As
vibration limits is beneficial to avoid cold joints. a general guide to these trials, a dosage range of 200 ml
- As a synergy admixture in combination with a to 600 ml per 100 kg of total cementitious material is
superplasticizer. recommended as a starting point.
Depending on the desired properties, a dosage of up to
ADVANTAGES 800 ml per 100 kg of total cementitious material can be
- Considerably extends vibration limit of concrete used. Higher dosages may be required when certain
mixes thus reducing incidence of honeycombing and combinations of materials and conditions are present.
cold joints.
- Reduces placing problems in hot weather concreting SETTING TIMES
by improving workability and workability retention.
MasterPozzolith 384 acts efficiently to give controlled
- Improves trowellability and surface finish.
retardation of initial set. Setting times of concrete mixes
- Improves pumpability of concrete.
are related to cement type and ambient temperatures.
- Considerably reduces permeability.
- Enables economies in mix designs to be achieved.
COMPATIBILITY
MasterPozzolith 384 can be used with all types of
PACKAGING Portland cement including Sulphate Resisting. For use
MasterPozzolith 384 is available in bulk or in 210 litre
with other special cements, contact Master Builders
drums.
Solutions Technical Services Department.

TYPICAL PROPERTIES MasterPozzolith 384 should not be pre-mixed with


Appearance : Dark brown/black liquid other admixtures. If other admixtures are to be used in
Specific gravity : 1.030 – 1.100 @ 25°C concrete containing MasterPozzolith 384, those must
Chloride content : "chloride-free” to BS EN 934-2 be dispensed separately.
Freezing point : 0°C. Can be reconstituted if
stirred after thawing.
Flashpoint : Nil

MasterPozzolith® 384 1/2


MasterPozzolith® 384
Low dosage retarding and plasticizing admixture for concrete

NOTE
EFFECTS OF OVER DOSAGE Field service, where provided, does not constitute
A severe over dosage of MasterPozzolith 384 will result supervisory responsibility. For additional information
in the following: contact your local Master Builders Solutions
- Retardation of initial and final set. representative.
- Slight increase in air entrainment. Master Builders Solutions reserves the right to have the
- Increase in workability. true cause of any difficulty determined by accepted test
methods.
Providing it is properly cured, the ultimate strength of the
concrete will not be adversely affected and will generally
be higher than for normal concrete. The retarding effects QUALITY AND CARE
of very high dosages will be exaggerated with SR All Master Builders Solutions Products are manufactured
cement. under a management system independently certified to
conform to the requirements of the quality,
DISPENSING environmental and occupational health and safety
MasterPozzolith 384 should be dispensed through a standards of ISO 9001 and Master Builders Solutions
proprietary dispenser, such as is available from Master ESHQ recommendations.
Builders Solutions.
* Properties listed are based on laboratory-controlled
tests.
STORAGE ® = Registered trademark of the MBCC-Group in many
Store under cover, out of direct sunlight and protect from countries
extremes of temperature. Shelf life is 1 year when stored
as above. Failure to comply with the recommended
storage conditions may result in premature deterioration CONTACT
of the product or packaging. For specific storage advice Should you require any further information, please do
consult Master Builders Solutions Technical Services not hesitate to contact us:
Department.
www.master-builders-solutions.com/en-sa
SAFETY PRECAUTIONS enquirycc.saudi@mbcc-group.com
MasterPozzolith 384 is not a fire or health hazard. M: +966 13 853 8600
Spillages should be washed down immediately with cold
water. For further information, refer to safety data sheet. Master Builders Solutions Saudi Arabia for
Manufacturing LLC.
P.O. Box 1884, Al Khobar, KSA

The technical information and application advice given in this Master Builders Solutions publication are based on the present state of
our best scientific and practical knowledge. As the information herein is of a general nature, no assumption can be made as to a
STATEMENT OF
product's suitability for a particular use or application and no warranty as to its accuracy, reliability or completeness either expressed
RESPONSIBILITY
or implied is given other than those required by law. The user is responsible for checking the suitability of products for their intended
use.
Disclaimer:
In view of widely varying site conditions and fields of application of our All descriptions, drawings, photographs, data, ratios, weights i.e. stated
products, this technical data sheet is meant to provide general herein can be changed without advance notice and do not represent the
application guidelines only. This information is based on our present condition of the product as stipulated by contract. It is the sole
knowledge and experience. The customer is not released from the responsibility of the recipient of our products to observe possible
obligation to conduct careful testing of suitability and possible proprietary rights as well as existing laws and provisions. The reference
application for the intended use. The customer is obliged to contact the of trade names of other companies is no recommendation and does not
technical help-line for fields of application not expressly stated in the exclude the use of products of similar type. Our information only
technical data sheet under "Fields of Application". Use of the product describes the quality of our products and services and is no warranty.
beyond the fields of application as stated in the technical data sheet Liability is accepted for incomplete or incorrect particulars in our data
without previous consultation with Master Builders Solutions and sheets only in the event of intent or gross negligence, without prejudice
possible resulting damages are in the sole responsibility of the to claims under product liability laws.
customer.
MasterPozzolith® 384 2/2 Master Builders Solutions Saudi / 10-18 / 08-21

You might also like