Professional Documents
Culture Documents
PACKAGING
MasterRheobuild 890 is available in, 1000ltr bulk.
MasterRheobuild® 890 (Formerly known as Rheobuild 890)
WORKABILITY NOTE
MasterRheobuild 890 ensures that rheoplastic Field service, where provided, does not constitute
concrete remains workable in excess 2 hours at supervisory responsibility. For additional
+20°C. information, contact your local BASF
representative.
Workability loss is dependent on temperature, the
type of cement, the nature of aggregates, the BASF reserves the right to have the true cause of
method of transport and initial workability. It is any difficulty determined by accepted test
strongly recommended that concrete should be methods.
properly cured, particularly in hot and dry climates.
QUALITY STATEMENT
STORAGE All products manufactured by BASF Egypt, or
imported from BASF affiliate companies world-
MasterRheobuild 890 must be stored where
wide, are manufactured to procedures certified to
temperatures do not drop below +5°C. If product
conform to the quality, environment, health &
has frozen, thaw and agitate until completely
safety management systems described in the ISO
reconstituted. Store under cover, out of direct
9001:2008, ISO 14001:2004 & OHSAS
sunlight and protect from extremes of
18001:2007 standards.
temperature.
* Properties listed are based on laboratory controlled tests.
Failure to comply with the recommended storage
conditions may result in premature deterioration of
® = Registered trademark of the BASF-Group in many countries
the product or packaging. For specific storage
advice, consult BASF's Technical Services
Department.
SHELF LIFE
Up to 24 months if stored according to
manufacturer’s instructions in unopened
containers.
SAFETY PRECAUTIONS
MasterRheobuild 890 is not a fire or health
hazard. Spillages should be washed down
immediately with cold water. For further
information, refer to the material safety data
sheet.
BASF_CC-EG/Rheobuild_890_03_08/v1/05_15