Professional Documents
Culture Documents
Series Low Profile Hydraulic Wrenches
Industrial Impact Sockets
Raptor Series Hi-Speed Pneumatic Wrenches
Series Hydraulic Pumps
www.torcup.com
Square Drive Hydraulic Torque Wrench
15
14
16
2
13
9
10
6
7 12
8
4
11
www.torcup.com
TU ULTRA Series Accessories
Exte
nded
Standard Reac
tion T
Reaction Arm ube
Extended
Reaction Arm
Housing Reaction
Pad
Solid Extended
Reaction Arm
Tool
Handle
Extende
d Reacti
on Tube
Case available for
TU-2, 3, 7, 11 models
Technical Data tu-2 tu-3 tu-5 tu-7 tu-11 Tu-20 tu-27 tu-60
DIMENSIONAL DATA TU-2 TU-3 tu-5 TU-7 TU-11 TU-20 TU-27 TU-60
TOOL WEIGHT (lb) 3.9 9 17 19 29 61 70 130
TOOL WEIGHT (kg) 1.7 4.1 7.7 8.6 13.1 27.6 31.7 59.8
HEIGHT (in) 4.20 5.33 6.40 7.17 7.80 9.22 10.19 11.50
HEIGHT (mm) 106.7 135.3 162.6 182.1 198.1 234.3 258.8 292.1
LENGTH 1 (in) 4.82 6.4 7.91 8.84 9.79 9.44 12.32 15.38
LENGTH 1 (mm) 122.4 162.5 200.9 224.5 248.6 239.7 312.9 390.7
LENGTH 2 (in) 6.34 8.43 10.66 11.58 12.79 16.09 16.33 20.40
LENGTH 2 (mm) 161.0 214.1 270.7 294.1 324.8 408.9 414.8 518.2
RADIUS (in) 0.98 1.31 1.57 1.77 2.03 2.31 2.46 3.10
RADIUS (mm) 24.9 33.2 39.8 44.9 51.5 58.7 62.5 78.7
WIDTH 1 (in) 2.00 2.63 3.12 3.61 3.95 4.87 5.26 6.58
WIDTH 1 (mm) 50.8 66.8 79.2 91.7 100.3 123.6 133.6 167.1
WIDTH 2 (in) 2.79 3.68 4.64 5.06 5.43 7.15 7.57 8.89
WIDTH 2 (mm) 70.9 93.5 117.8 128.5 137.9 181.7 192.3 225.8
WIDTH 3 (in) 4.42 5.81 7.00 7.98 8.72 10.88 11.63 14.29
WIDTH 3 (mm) 112.3 147.6 177.8 202.7 221.5 276.4 295.4 363.0
Low Profile Hydraulic Torque Wrench
01. Patented “Peanut-Shaped” Cylinder 07. In-Line Reaction Pad
Fit both the cylinder and link in confined Assures torsion free reaction every time
areas
08. Steel Alignment Pin
02. Engagement Rod Assures equal load displacement
Automatically engages link on the first between side plates
stroke
09. Completely Flat Design
03. Never-Lock Drive Pawl Cylinder and link width are equal for tight
Ensures tool will NEVER lock on fits
www.torcup.com
TX Series Accessories
TX Cylinder
Spanner Housing
Tool Handle
Ratchet Link
Open
Spanner Wrench
Stack Socket
Hex to Square
Low Point
Drive Adaptor
Reaction Paddle
Inline Reaction
Arm
Low Point
Reaction Paddle
Open
Spanner Wrench
Spanner Wrench
CYLINDER WEIGHT (lb) 1.00 3.50 6.00 11.70 16.00 26.00 29.00
CYLINDER WEIGHT (kg) 0.45 1.58 2.70 5.00 7.30 11.50 13.00
LINK WEIGHT FROM (lb) 1.00 2.40 5.40 11.90 21.00 29.00 29.00
LINK WEIGHT TO (lb) 1.00 3.50 7.60 14.50 28.00 39.50 39.50
LINK WEIGHT FROM (kg) 0.45 1.00 2.40 5.50 9.50 13.00 13.00
LINK WEIGHT TO (kg) 0.45 1.50 3.40 6.50 13.00 17.90 17.90
WIDTH LENGTH
HEIGHT
RADIUS
www.torcup.com
RAPTOR RP Series Accessories
Socket to Socket
Reaction Arm
Weld Blank
Standard Reaction
Arm
Long Reaction
Arm
RP-6000 With
Standard Reaction
Arm
Straight Reaction
Pinion Reaction
Arm
Arm
Technical Data RP-500 RP-1000 RP-2000 RP-3000 RP-6000
E l e ct r ic H y d r a u lic P u mp
01. Heavy Duty Air Motor 06. Auto-Dump 11. Supplied With Dual Non-
Powerful 4 HP industrial Relieves all pressure from Conductive
duty air motor runs on hoses High pressure hose with
50cfm/90 PSI couplers
07. Filter-Lubricator
02. High Output 2 Stage Pumps Supplied with high flow 12. Standard Carrying Handle
F/R/L for long trouble free Provided
03. Quadra-Torc Function operation Optional roll cage available
(optional) to protect motor
Available in single and 08. 1.5 Gallon Reservoir
multi-port designs for 13. Low Center of Gravity
operating up to 4 tools 09. Precise PSI/BAR 4” For more stability
simultaneously Pressure Gauge
14. For Use in Flammable
04. Quiet Operation 10. Quick Connect Couplers Environments
Approximately 80dB @ Each pump and hose is
10,000 PSI fitted with quick connect, 15. Serviceable Motor Vanes
no-drip, threadless safety and Springs
05. Rugged Remote couplers, with 2:1 safety
15’ remote pendant to ratio
control motor and valve
Roll Cage
Mulit Port
Adaptor Kit
Heat
Exchanger
Gauge
DIMENSIONS All dimensions are the same for 230v models.
EP500 EP1000 EP1000-Q
A (in / mm) 13.1 / 333 15.13 / 384 17 / 432
C C
B (in / mm) 8.19 / 208 8.75 / 222 9.75 / 248
C (in / mm) 19 / 483 19 / 483 19 / 483
D (in / mm) 5.73 / 146 5.95 / 151 5.95 / 151
D D EP1000
B B A
RESERVOIR CAPACITY(gal/litre) 1.0 / 3.8 1 .0 / 3.8 1.5 / 5.7 1.5 / 5.7 2.5 / 9.5 2.5 / 9.5
VALVE STYLE Auto Retract Auto Retract Auto Retract Auto Retract Auto Retract Auto Retract
MOTOR SPECIFICATION 1.125 HP @ 115VAC 1.125 HP @ 230VAC 1.5 HP @ 115VAC 1.5 HP @ 230VAC 1.5 HP @ 115VAC 1.5 HP @ 230VAC
Single Phase Single Phase Single Phase Single Phase CSingle Phase Single Phase C
FLOW RATE 525 cu.in/min. @1,100psi 8.61 litres/min. @ 75 bar 700 cu.in/min. @1,100psi 11.5 litres/min. @ 0bar 700 cu.in/min. @1,100psi 11.5 litres/min. @ 0bar
46 cu.in./min.@10,000psi .78 litres/min. @ 700 bar 55.cu.in/min.@10,000psi .9 litres/min.C@ 700 bar C /min. @ 700 bar
55.cu.in/min. @ 10,000 psi .9 litres
WEIGHT (lbs/kg) 59.4 / 26.9 59.4 / 26.9 74.2 / 33.7 74.2 / 33.7 81.2 / 36.8 81.2 / 36.8
AMPS 12-13 12-13 17-18 1 7-18 17-18 17-18
D D
D D
B B A
DIMENSIONS
AP1000
B B A A
A (in / mm) 15.13 / 384
B (in / mm) 8.75 / 222
C (in / mm) 16.09/ 409
D (in / mm) 5.94 / 151
C C
TECHNICAL DATA AP1000
RESERVOIR CAPACITY (gal/litre) 1.5 / 5.7
VALVE STYLE
D
MOTOR SPECIFICATION
Auto Retract
4 HP @ 90 psi/50cfm
D AP1000
FLOW RATE 700 cu.in/min. @1,100psi
www.torcup.com
The TorcUP Comprehensive Factory Warranty
We provide ongoing support with operational training and care of all tools, free re-
pair of warranty tools, and no-cost temporary replacements. At TorcUP, we strive to
become your total product solution.
The customer will be completely satisfied with the performance, operation, support
and overall value of their TorcUP System.
The customer’s staff will be thoroughly trained to the customer’s satisfaction on the
proper operation and care of their TorcUP System.
If the TorcUP System should fail to operate properly under normal usage within 13
months of purchase, the system will be repaired at no charge.
If the TorcUP System cannot be repaired under warranty at the customer’s site,
TorcUP will furnish the customer with loaner components as needed at no charge
during the warranty period.
If during the warranty period, the tooling must be returned to the TorcUP Repair
Facility for warranty maintenance, the customer will be provided with a loaner unit at
no charge for the duration of the repair.
The Warranty covers factory defects for the following lengths of time
dependent upon the tooling purchased.*
SOCKETS - Lifetime*
+1-610-250-5800 +1-610-250-2700
888-TORCUP-1 sales@torcup.com