Professional Documents
Culture Documents
ED942
October, 2008
Equipment : MS Software
Improvement & Part No. Errata & Technical Product Info. & Modification Field Equip.
Countermeasures Additions Information Specifications Control Countermeasure
UN1 [ ] UN2 [ ] UN3 [ √ ] UN4 [ ] No. No.
<Contents>
Before installing MS Software into the ICIII/FMPCIII, preliminary work for the ICIII/FMPCIII is required
according to the system environment. This MTI describes preliminary work for the ICIII/FMPCIII before
installing MS Software.
Field Countermeasures : [ ] Individually, with Charge [ ] Individually, Free of Charge [ ] All Free of Charge
Order Basis Automatic Distribution
Part Preparation : [ ] [ ] Available : [ ] Being Prepared by: [ ]
After Order Received by: September 2008
1
Pre-installation guide (for ICIII/FMPCIII)
Before installing MS01 Basic Software, the following preliminary work for ICIII hardware is required.
2
2. Outline of Preliminary Work for the FMPCIII
Before installing MS01 Basic Software, the following preliminary work for FMPCIII hardware is required.
IMPORTANT:
Do not install the “NetBEUI” protocol.
3
3. BIOS Setting and User Registration
* The following procedures are examples. They Register the following user name and password.
may vary depending on the PC.
User name: FRONTIER
Password: FRONTIER
1. Start up the ICIII/FMPCIII and then press [FX] Group: Administrators
key (“X” varies depending on the PC) to display
the BIOS screen. The following procedure is an example when
using the Wizard in the Windows XP.
2. Set “Hyper-threading” to ON.
1. On the Desktop, select [Start] -> “Control
Note 1: When a “Core 2” processor is used and Panel” -> “User Accounts” and then click
this setting is not displayed in the BIOS “Create a new account” in the “User Accounts”
setting screen, this operation is not screen.
necessary.
4
4. In the “User Accounts” screen, click the 8. Click “User Account”.
“FRONTIER” icon.
6. Enter “FRONTIER” both in the “Type a new 10. In the “Select logon and logoff options” screen,
password” and in “Type the new password remove the check [9] from “Use the Welcome
again...” and then click the [Create Password] screen” and then click the [Apply options]
button. button.
5
4. Windows Settings
1. On the Desktop, select [Start] -> “Control 1. On the Desktop, select [Start] -> “Control
Panel” -> “System”. In the “System Properties” Panel” -> “Accessibility Options”. In the
screen, select the “Advanced” tab, click the “Accessibility Options” screen, select the
[Settings] button and then perform the system “Keyboard” tab, click the [Settings] button,
failure settings as shown below. remove checks [9] from all items and then click
the [OK] button.
6
4.4 Disabling Error Reporting 4.5 Auto-hide Setting for Task Bar
1. Open “Control Panel”. 1. On the Desktop, select [Start] -> “Settings” ->
“Taskbar & Start Menu”.
2. Double-click “System”.
7
4.6 “Visual Notification” to ON in Dr. Watson 4.7 Disabling Windows Firewall
Dialog Box
1. Open “Control Panel”.
1. On the Desktop, select [Start] -> “Run”.
2. Double-click “Windows Firewall”.
2. Enter “drwtsn32” and then click the [OK]
button.
8
4.8 Time Zone Setting (for each country) Note 2: Note that if a date later than the current
date is set, the system cannot be started
Open “Control Panel” -> “Date and Time” to set up even if the date setting is returned to
the Time Zone and Date & Time appropriate for the current date. Also note that AM/PM is
the installation location. specified correctly.
9
3. Click the [Properties] button. 6. Remove the check [9] from the “Allow the
The “Local Area Connection Properties” computer to turn off this device to save power”
window appears. Make sure that the “General” box.
tab is selected.
7. Click the [OK] button.
Operation returns to the “Network
Connections” window.
10
3. In the “General” tab, select “Disabled” for 3. In the “Folder Options” screen, select the
“Startup type” and then click the [Stop] button. “View” tab and then place a check [9] in “Do
not cache thumbnails”. Click the [Apply to All
Folders] button and then the [OK] button.
11
3. In the “Automatic Updates” dialog box, select 4.13 Disabling Power Options
“Turn off Automatic Updates”. Click the [Apply]
button and then the [OK] button. 1. Open “Control Panel”.
12
4.14 Disabling Screen Saver 4.15 Disabling Desktop Cleanup
1. Open “Control Panel”. 1. On the Desktop, right-click the mouse and then
select “Properties”.
2. Double-click “Display”.
2. Select the “Desktop” tab and then click the
[Customize Desktop…] button.
13
FUJIFILM Corporation
7-3, Akasaka 9-chome, Minato-ku, Tokyo 107-0052, Japan.
Ref. No. PP3-ED942 QAD-08.10-FP Printed in Japan