Professional Documents
Culture Documents
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
A
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
Customer : -
C
Project Description : -
Subject : 61246869-80 Plus IO Box
Project No.: : -
D
Norm / Standards : IEC/UL Type Of Enclosure : Stainless Steel Junction Box -304
Compliance : IEC/UL Fabrication Year : -
Rated Voltage / Frequency : - Degree Of Protection : IP65
Rated Current : - Temperature Range : 0 to 50 °C
E Protection Device : - Panel Thickness : 1.5 x 1.5 mm
Earth System : - Panel Dimension H x W x D : 300mm x 450mm x 160mm
Rated Control Voltage : 24Vdc Incoming Cables : Bottom
Rated Short-Circuit Max. : - Outgoing Cables : Bottom
Rated Short-Circuit Min. : - Other Comments : -
F
2
R03 DKSOCCL 07-12-2017 DKSOJPNA DKSOEPV 61246869-80 Plus IO Box Title page/Cover Sheet =
R02 inpaspla 04-09-2017
Drawing No.:
DKSOJPNA DKSOEPV Made by inpagat 04-01-2018 Alfa Laval Copenhagen A/S -CAT +
R01 inpaspla 10-08-2017 DKSOJPNA DKSOEPV Maskinvej 5 - DK-2860 Søborg - Denmark 61246869 Page 1
Revision No. Made by Modification Date Checked by/Date Approved by/Date Project Name Date Pages of 25
0 1 2 3 4 5 6 7 8 9
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
=A1+CP-P35&SCH/80 SAFETY INPUTS BOWL SPEED,COVER SWITCH & GREASE LEVEL 07-07-2017 inpaspla
=A1+CP-P35&SCH/82 ANALOG & DIGITAL INPUTS VIBRATION & SPEED X20CM2821 07-07-2017 inpaspla
E
=A1+CP-P35&SCH/83 ANALOG INPUT LOAD CELL 07-07-2017 inpaspla
=A1+CP-P35&SCH/115 -101A2.1 & 101A3 SAFETY IO CARDS OVERVIEW DIAGRAM 08-06-2017 inpaspla
F
=A1+CP-P35&SCH/116 -101A3.1 & 101A4 ANALOG & DIGITAL IO CARDS OVERVIEW DIAGRAM 07-07-2017 inpaspla
1 13
R03 DKSOCCL 07-12-2017 DKSOJPNA DKSOEPV 61246869-80 Plus IO Box TABLE OF CONTENTS =
R02 inpaspla 04-09-2017
Drawing No.:
DKSOJPNA DKSOEPV Made by inpagat 07-07-2017 Alfa Laval Copenhagen A/S -CAT +
R01 inpaspla 10-08-2017 DKSOJPNA DKSOEPV Maskinvej 5 - DK-2860 Søborg - Denmark 61246869 Page 2
Revision No. Made by Modification Date Checked by/Date Approved by/Date Project Name Date Pages of 25
0 1 2 3 4 5 6 7 8 9
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
2 =A1+CP-P35&SCH/1
R03 DKSOCCL 07-12-2017 DKSOJPNA DKSOEPV 61246869-80 Plus IO Box Structure identifier overview =
R02 inpaspla 04-09-2017
Drawing No.:
DKSOJPNA DKSOEPV Made by inpagat 07-07-2017 Alfa Laval Copenhagen A/S -CAT +
R01 inpaspla 10-08-2017 DKSOJPNA DKSOEPV Maskinvej 5 - DK-2860 Søborg - Denmark 61246869 Page 13
Revision No. Made by Modification Date Checked by/Date Approved by/Date Project Name Date Pages of 25
0 1 2 3 4 5 6 7 8 9
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
Green GN
C
E Silver SR
White WH + 24 VDC
F
Yellow YE
* Colour identification using combination of those colours listed above may be used *
* For safety reasons, the colour Green or the colour Yellow may not be used except in the bicolour combination Green and Yellow *
G * In General The Number Of Terminal Connection Is Used For Marking *
=+&GR/13 6
R03 DKSOCCL 07-12-2017 DKSOJPNA DKSOEPV 61246869-80 Plus IO Box WIRE COLOUR/WIRE CODE = A1
R02 inpaspla 04-09-2017
Drawing No.:
DKSOJPNA DKSOEPV Made by inpagat 05-11-2014 Alfa Laval Copenhagen A/S -CAT + CP-P35
R01 inpaspla 10-08-2017 DKSOJPNA DKSOEPV Maskinvej 5 - DK-2860 Søborg - Denmark 61246869 Page 1
Revision No. Made by Modification Date Checked by/Date Approved by/Date Project Name Date Pages of 25
0 1 2 3 4 5 6 7 8 9
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
A
Component Labelling Component Type
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
A1 13 11
-19K4
Example: -19K4 -19K4
12
A2 14
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.
K CONTACTOR
RLY RELAY
M M MOTORS
R R RESISTANCE,RHEOSTAT,...
Dim: 17x5mm
Color: White background, characters black
-20Q0 U U TRANSDUCER : ELECTRICAL / ELECTRICAL QUANTITY
FREQUENCY CONTROLLER,SOFTSTARTER,TRANSDUCER,..
Texts according to diagram
Dim: 17x5mm stickers which are stick on components X X TERMINAL BLOCKS,CONNECTORS,SOCKET,...
1 7
R03 DKSOCCL 07-12-2017 DKSOJPNA DKSOEPV 61246869-80 Plus IO Box COMPONENT MARKING & = A1
Drawing No.:
R02 inpaspla 04-09-2017 DKSOJPNA DKSOEPV Made by inpagat 05-11-2014 Alfa Laval Copenhagen A/S -CAT ABBREVIATIONS + CP-P35
R01 inpaspla 10-08-2017 DKSOJPNA DKSOEPV Maskinvej 5 - DK-2860 Søborg - Denmark 61246869 Page 6
Revision No. Made by Modification Date Checked by/Date Approved by/Date Project Name Date Pages of 25
0 1 2 3 4 5 6 7 8 9
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
A
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.
+P0 = Distribution Panel +P11 = Main - and Back Drive Panel +P26 = Small/Large Junction Box
+P1 = Control Panel +P12 = Disp. +P27 = Disp.
+P1.1 = VFD Panel +P13 = Disp. +P28 = Disp.
C
+P1.2 = Application Panel +P14 = Disp. +P29 = Disp.
+P1.3 = Disp. +P15 = Disp. +P30 = Disp.
+P1.4 = Other external Control Panel +P16 = Disp. +P31 = UL - (BD og MD)
+P2 = Decanter +P17 = Disp. +P32 = Disp.
D
6 8
R03 DKSOCCL 07-12-2017 DKSOJPNA DKSOEPV 61246869-80 Plus IO Box POSITIONS = A1
R02 inpaspla 04-09-2017
Drawing No.:
DKSOJPNA DKSOEPV Made by inpagat 05-11-2014 Alfa Laval Copenhagen A/S -CAT + CP-P35
R01 inpaspla 10-08-2017 DKSOJPNA DKSOEPV Maskinvej 5 - DK-2860 Søborg - Denmark 61246869 Page 7
Revision No. Made by Modification Date Checked by/Date Approved by/Date Project Name Date Pages of 25
0 1 2 3 4 5 6 7 8 9
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
A
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
OPTION
ETHERNET LINK TO
CUSTOMER (S/FTP CAT5)
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.
HMI
C
+P34
PANEL
RESET
LIVE
EM.STOP
(L1,L2,L3,PE)
FROM CUSTOME
POWER SUPPLY
7 9
R03 DKSOCCL 07-12-2017 DKSOJPNA DKSOEPV 61246869-80 Plus IO Box GENERAL OVERVIEW = A1
R02 inpaspla 04-09-2017
Drawing No.:
DKSOJPNA DKSOEPV Made by inpagat 05-11-2014 Alfa Laval Copenhagen A/S -CAT + CP-P35
R01 inpaspla 10-08-2017 DKSOJPNA DKSOEPV Maskinvej 5 - DK-2860 Søborg - Denmark 61246869 Page 8
Revision No. Made by Modification Date Checked by/Date Approved by/Date Project Name Date Pages of 25
0 1 2 3 4 5 6 7 8 9
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
A
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.
6 7
1 2 3 4 5 7 8
11
9 10
E
4 GB END VIBRATION SENSOR (S5) 10 ETHERNET POWERLINK TO CORE CONTROLLER ,S/FTP CAT5 CABLE, CROSSOVER
8 10
R03 DKSOCCL 07-12-2017 DKSOJPNA DKSOEPV 61246869-80 Plus IO Box GENERAL INTERCONNECTION = A1
Drawing No.:
R02 inpaspla 04-09-2017 DKSOJPNA DKSOEPV Made by inpagat 05-11-2014 Alfa Laval Copenhagen A/S -CAT OVERVIEW + CP-P35
R01 inpaspla 10-08-2017 DKSOJPNA DKSOEPV Maskinvej 5 - DK-2860 Søborg - Denmark 61246869 Page 9
Revision No. Made by Modification Date Checked by/Date Approved by/Date Project Name Date Pages of 25
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
R01
R02
R03
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
Revision No.
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.
F
E
B
C
A
G
D
inpaspla
inpaspla
DKSOCCL
Made by
0
10-08-2017
04-09-2017
07-12-2017
DKSOJPNA
DKSOJPNA
DKSOJPNA
45 mm 35 mm
DKSOEPV
DKSOEPV
DKSOEPV
1
Approved by/Date
50 mm
-10X1
-10X2
Project
Made by
-10X3
-10X4
Name
inpagat
-10X5
-10X6
2
-10X7
-10X8
Date
05-11-2014
30 mm 30 mm 30 mm 30 mm
-10X9
450 mm
Front
3
Bottom
40 mm
-10X12
40 mm
4
-10X13
40 mm
All Chassis Connector (X1/X2/X3/etc.) Are Laser Printed Onto The Bottom
-10X14
45 mm
60 mm
Right
5
160 mm 300 mm
ENCLOSURE LAYOUT
4 pc M5 X 25 mm Welded On
7
40 mm 220 mm 40 mm
Top
160 mm
61246869
Front
Drawing No.:
8
300 mm
Page
= A1
Pages of
+ CP-P35
9
25
10
11
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
R01
R02
R03
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
Revision No.
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.
F
E
B
C
A
G
D
10
inpaspla
inpaspla
DKSOCCL
Made by
0
250 mm
10-08-2017
04-09-2017
07-12-2017
210 mm
DKSOJPNA
DKSOJPNA
DKSOJPNA
DKSOEPV
DKSOEPV
DKSOEPV
1
Approved by/Date
-11U1
Project
Made by
-11MP3
-11MP4
Name
Perforation Ø=6 mm x 4
inpagat
Perforation Ø=20 mm x 4
30 mm
2
30 mm X20BC0083 -101A1
Date
X20PS9400 -101A2
05-11-2014
-101A2.1
X20SD1207
-101A3
X20SI2100
-101A3.1
X20AT2222
X20ZF0000
-101A3.2
3
X20ZF0000
-101A3.3
X20ZF0000
-101A3.4
X20CM2821
-101A4
Top
Cable Duct
280 mm
400 mm
X20ZF0000
-101A4.3
-101A4.1
X20AI1744
-104A1
4
-104A5
-11A5
-X5PE
-X5
-X5
5
40 mm 33 mm
PLC
Space
Front
4mm
61246869
Drawing No.:
8
Page
= A1
Pages of
+ CP-P35
9
25
11
12
0 1 2 3 4 5 6 7 8 9
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
A
Controller With Details of 2 pc. Mounting plate
#3
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
#2 : 4 x (2pc. - 13V1 With 1pc. M5 x 50 mm Screwbolt, 1pc. Toothed Washer, 2pc. Washer & 1pc. Lock Nut)
3 mm
11 mm
#3 : 4 x (1pc. - 13V2 With 2pc. M5 x 25 mm Screwbolt, 4pc. Toothed Washer & 4pc. Nut)
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.
B
#4 : 4 x (M5 x 25 mm Welded On With 1pc. Plastic Distance Piece Max. 7 mm High & 1pc. Lock Nut)
17 mm
#2
D
#3
-11MP3
#4
-11MP4
E
Max. 7 mm
7 mm
free Space
#1
11 13
R03 DKSOCCL 07-12-2017 DKSOJPNA DKSOEPV 61246869-80 Plus IO Box MOUNTING PLATE LAYOUT = A1
R02 inpaspla 04-09-2017
Drawing No.:
DKSOJPNA DKSOEPV Made by inpagat 05-11-2014 Alfa Laval Copenhagen A/S -CAT + CP-P35
R01 inpaspla 10-08-2017 DKSOJPNA DKSOEPV Maskinvej 5 - DK-2860 Søborg - Denmark 61246869 Page 12
Revision No. Made by Modification Date Checked by/Date Approved by/Date Project Name Date Pages of 25
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
R01
R02
R03
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
Revision No.
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.
F
E
B
C
A
G
D
12
inpaspla
inpaspla
DKSOCCL
Made by
0
10-08-2017
04-09-2017
07-12-2017
DKSOJPNA
DKSOJPNA
DKSOJPNA
Approved by/Date
45 mm 210 mm 45 mm
Project
Made by
Name
inpagat
30 mm
S
S
R
R
2
Date
05-11-2014
3
390 mm
4
R= M8 x 30 mm Welded On
5
S
S
R
R
REAR SIDE
7
61246869
Drawing No.:
8
Page
= A1
Pages of
+ CP-P35
9
25
13
25
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
R01
R02
R03
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
Revision No.
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.
F
E
B
C
A
G
D
13
inpaspla
inpaspla
DKSOCCL
Made by
0
10-08-2017
04-09-2017
07-12-2017
DKSOJPNA
DKSOJPNA
DKSOJPNA
DKSOEPV
DKSOEPV
DKSOEPV
1
Approved by/Date
-X5
0.75 mm2
Project
Made by
-
Name
FROM STD VFD PANEL
inpagat
24VDC POWER SUPPLY
2
-X5
1 mm2
PE
Date
05-11-2014
3
61246869
Drawing No.:
8
Page
= A1
Pages of
+ CP-P35
9
25
25
80
0 1 2 3 4 5 6 7 8 9
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
* PART OF MACHINE DELIVERY-SEE MACHINE SPARE PART LIST
A
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
=A1
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
+P2
BOWL SPEED COVER SWITCH SENSOR GREASE LEVEL
SENSOR (OVERSPEED)
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.
1 2 3 4 1+ 2+ 3+ 4+
1 2 3 4
1 2
* *
BN WH BU BK GY BN WH BU BK GY
0.34 mm2
0.34 mm2
0.34 mm2
0.34 mm2
0.34 mm2
0.34 mm2
0.34 mm2
0.34 mm2
0.34 mm2
0.34 mm2
0.34 mm2
0.34 mm2
0.34 mm2
14 15 16 X1 12 14 X1 11 12 X1 21 22
25 81
R03 DKSOCCL 07-12-2017 DKSOJPNA DKSOEPV 61246869-80 Plus IO Box SAFETY INPUTS BOWL SPEED,COVER = A1
Drawing No.:
R02 inpaspla 04-09-2017 DKSOJPNA DKSOEPV Made by inpagat 05-11-2014 Alfa Laval Copenhagen A/S -CAT SWITCH & GREASE LEVEL + CP-P35
R01 inpaspla 10-08-2017 DKSOJPNA DKSOEPV Maskinvej 5 - DK-2860 Søborg - Denmark 61246869 Page 80
Revision No. Made by Modification Date Checked by/Date Approved by/Date Project Name Date Pages of 25
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
R01
R02
R03
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
Revision No.
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.
F
E
B
C
A
G
D
80
inpaspla
inpaspla
DKSOCCL
Made by
+P2
=A1
0
10-08-2017
04-09-2017
07-12-2017
-S3
DKSOJPNA
DKSOJPNA
DKSOJPNA
/10.2
-10X3
1
*
U
BN
2
0.34 mm2
2+
11
DKSOEPV
DKSOEPV
DKSOEPV
1
3
3+
0.34 mm2
Approved by/Date
3
WH BU
4
/116.2
12
4+
0.34 mm2
-101A3.1
GB END BEARING
Sensor+1
4
BK
5
Project
5+
0.34 mm2
Made by
TEMPERATURE SENSOR
5
GY
Name
inpagat
2
Date
05-11-2014
-S4
3
/10.2
-10X4
1
1+
0.34 mm2
*
U
1
BN
2
2+
0.34 mm2
21
WH
3
3+
0.34 mm2
3
BU
4
/116.2
22
4+
0.34 mm2
-101A3.1
Sensor+2
4
TEMPERATURE
BK
5
5+
TEMPERATURE SENSOR
0.34 mm2
5
GY
4
5
TEMPERATURE
ANALOG INPUTS BEARING
7
61246869
Drawing No.:
8
Page
= A1
Pages of
+ CP-P35
9
25
81
82
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
R01
R02
R03
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
Revision No.
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.
F
E
B
C
A
G
D
81
inpaspla
inpaspla
DKSOCCL
Made by
+P2
=A1
0
10-08-2017
04-09-2017
07-12-2017
DKSOJPNA
DKSOJPNA
DKSOJPNA
-S5
1
*
BN
DKSOEPV
DKSOEPV
DKSOEPV
1
0.34 mm2 A+
AI+1
Approved by/Date
/116.6
2
2
11
-101A4
0.34 mm2
GB END VIBRATION
3
WH BU
B-
Project
0.34 mm2
Made by
4
4
12
BK
0.34 mm2
GB END VIBRATION SENSOR
5
GY
Name
inpagat
2
Date
05-11-2014
-S6
/10.2
0.34 mm2 -10X6
3
1
BN
A+
0.34 mm2
AI+1
/116.6
2
2
21
-101A4
22
BK
0.34 mm2
5
GY
4
-S2
/10.1
-10X2
0.34 mm2
1
*
BN
5
0.34 mm2
2
2
WH
0.34 mm2
/116.6
3
24
-101A4
BU
+24V / K2
3
PINION SPEED
0.34 mm2
25
BK
4
0.34 mm2
26
GY
* PART OF MACHINE DELIVERY-SEE MACHINE SPARE PART LIST
6
X20CM2821
VIBRATION & SPEED
ANALOG & DIGITAL INPUTS
7
61246869
Drawing No.:
8
Page
= A1
Pages of
+ CP-P35
9
25
82
83
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
R01
R02
R03
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
Revision No.
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.
F
E
B
C
A
G
D
82
inpaspla
inpaspla
DKSOCCL
Made by
+P2
=A1
0
10-08-2017
04-09-2017
07-12-2017
DKSOJPNA
DKSOJPNA
DKSOJPNA
-S7
11
RD
*
0.34 mm2
DKSOEPV
DKSOEPV
DKSOEPV
1
2
GN
Approved by/Date
AI1+
/117.4
0.34 mm2
-101A4.1
3
X1 13 14
0.34 mm2
Project
15
Made by
WH BK
0.34 mm2
4
5
LOAD CELL (BD TORQUE)
OG
Name
inpagat
2
Date
05-11-2014
3
LOAD CELL
ANALOG INPUT
7
61246869
Drawing No.:
8
Page
= A1
Pages of
+ CP-P35
9
25
83
101
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
R01
R02
R03
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
Revision No.
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.
F
E
B
C
A
G
D
83
inpaspla
inpaspla
DKSOCCL
Made by
0
10-08-2017
04-09-2017
07-12-2017
DKSOJPNA
DKSOJPNA
DKSOJPNA
Approved by/Date
Project
Made by
Name
inpagat
2
Date
02-07-2015
X20BC0083
S/E
-101A1
L/A IF2
L/A IF1
/102.4
x1
3
x16
6
1
5
1
4
1
3
1
2
1
1
1
X20PS9400
r
-101A2
6
2
5
2
4
2
3
2
2
2
1
2
/102.1
X20SD1207
6
1
5
1
4
1
3
1
2
1
1
1
-101A2.1
/115.1
r
B
A
B/
A/
S E
v
e
p
6
2
5
2
4
2
3
2
2
2
1
2
X20SI2100
4
6
1
5
1
4
1
3
1
2
1
1
1
-101A3
1
/115.6
r
S E
2 0C
00
e
6 6
2 1
5 5
2 1
4 4
2 1
3 3
2 1
2 2
2 1
1 1
2 1
X20AT2222
x
r
-101A3.1
l
e
6
2
5
2
4
2
3
2
2
2
1
2
/116.1
X20ZF0000
-101A3.2
X20ZF0000
5
-101A3.3
X20ZF0000
-101A3.4
X20CM2821
1
2
4
2
e
6
2
5
2
4
2
3
2
2
2
1
2
6
X20ZF0000
-101A4.2
X20ZF0000
-101A4.3
6
1
5
1
4
1
3
1
2
1
1
1
X20AI1744
x
r
-101A4.1
l
e
6
2
5
2
4
2
3
2
2
2
1
2
7
61246869
Drawing No.:
8
Page
= A1
Pages of
+ CP-P35
9
25
101
102
0 1 2 3 4 5 6 7 8 9
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
25.5 / X5 +
A
25.5 / X5 -
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.
-101A2 -101A1 1 2 3 4 5 6 7 8
C /101.3 RXD RXD\ TXD Termi-na Termi-na TXD\ Termi-na Termi-na
/101.3 14
+24V BC X2X L. tion tion tion tion
15
+24V BC X2X L.
16
GND
+24V I/O
24 EPL EPL
IF1 IF2
25
+24V I/O
26 X20BC0083
GND
1 RJ45 2
RJ45
D
+24VDC
-102W6
GND
E
X20PS9400
101 104
R03 DKSOCCL 07-12-2017 DKSOJPNA DKSOEPV 61246869-80 Plus IO Box 24VDC POWER SUPPLY TO BASIC IO = A1
Drawing No.:
R02 inpaspla 04-09-2017 DKSOJPNA DKSOEPV Made by inpagat 05-11-2014 Alfa Laval Copenhagen A/S -CAT MODULE + CP-P35
R01 inpaspla 10-08-2017 DKSOJPNA DKSOEPV Maskinvej 5 - DK-2860 Søborg - Denmark 61246869 Page 102
Revision No. Made by Modification Date Checked by/Date Approved by/Date Project Name Date Pages of 25
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
R01
R02
R03
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
Revision No.
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.
F
E
B
C
A
G
D
102
inpaspla
inpaspla
DKSOCCL
Made by
0
10-08-2017
04-09-2017
07-12-2017
102.5 /
DKSOJPNA
DKSOJPNA
DKSOJPNA
DKSOEPV
DKSOEPV
DKSOEPV
1
-104A1
Approved by/Date
Project
Made by
1
2
-104W1
Name
Ethernet
inpagat
3
2
6
10/100Base-T(X)
Date
2901642
05-11-2014
5
10/100Base-T(X)
7
8
3
102.7 /
-101A1.IF2
-104A5
5
3
6
10/100Base-T(X)
6
2901642
4
5
10/100Base-T(X)
7
8
7
61246869
Drawing No.:
8
Page
= A1
Pages of
+ CP-P35
9
25
104
115
0 1 2 3 4 5 6 7 8 9
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
A
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
-101A2.1 X1
-101A3 X1
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.
/80.2 /80.4 11
11 /80.7 Chanel 1 DO-01 /80.4 COVER SWITCH
/101.3 +24V
supply 21 /101.4 SI-01
12
/80.5
B GND
12 21
A /80.2 -101A4:15 BOWL SPEED (OVERSPEED) Chanel 2 DO-02 /80.7 GREASE LEVEL
22 22
A/ SI-02 /80.7
Sensor 14
B /80.3 -101A2.1:X1:12
24
B/
13
n.c.
15
n.c.
16
C n.c.
23
n.c.
25
n.c.
26
n.c.
X20SD1207 X20SI2100
V2.61
V2.61
104 116
R03 DKSOCCL 07-12-2017 DKSOJPNA DKSOEPV 61246869-80 Plus IO Box -101A2.1 & 101A3 SAFETY IO CARDS = A1
Drawing No.:
R02 inpaspla 04-09-2017 DKSOJPNA DKSOEPV Made by inpagat 05-11-2014 Alfa Laval Copenhagen A/S -CAT OVERVIEW DIAGRAM + CP-P35
R01 inpaspla 10-08-2017 DKSOJPNA DKSOEPV Maskinvej 5 - DK-2860 Søborg - Denmark 61246869 Page 115
Revision No. Made by Modification Date Checked by/Date Approved by/Date Project Name Date Pages of 25
0 1 2 3 4 5 6 7 8 9
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
A
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
-101A3.1 -101A4
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.
/81.1 /82.1 11
11 I AI+1 /82.1 -=A1+P2:2 GB END VIBRATION
/81.1 Sensor+1 /81.1 -10X3:1 /82.3
/81.3 /80.1 12
Sensor
B /81.4 Sense-1
12
/81.1 -101A3.1:11 GB END BEARING TEMPERATURE /82.5 AI-1 /82.2 -=A1+P2:4
/101.4 13
13 AI1 GND
Sensor-1
14
21 +24V / K1 /80.1 BOWL SPEED
Sensor+2 /81.3 -10X4:1
15
Sensor
22 DI-1 /80.1 -10X1:2
Sense-2 /81.4 -101A3.1:21 INLET(MD) END BEARING TEMPERATURE
16
23 GND
Sensor-2
21
I AI+2 /82.3 -=A1+P2:2 INLET(MD) END VIBRATION
22
AI-2 /82.4 -=A1+P2:4
C 23
AI2 GND
24
+24VDC +24V / K2 /82.5 PINION SPEED
25
GND DI-2 /82.6 -10X2:2
+24VDC
GND
D
Internal voltage supply
24VDC by supply feed module
X20AT2222
X20CM2821
115 117
R03 DKSOCCL 07-12-2017 DKSOJPNA DKSOEPV 61246869-80 Plus IO Box -101A3.1 & 101A4 ANALOG & DIGITAL = A1
Drawing No.:
R02 inpaspla 04-09-2017 DKSOJPNA DKSOEPV Made by inpagat 05-11-2014 Alfa Laval Copenhagen A/S -CAT IO CARDS OVERVIEW DIAGRAM + CP-P35
R01 inpaspla 10-08-2017 DKSOJPNA DKSOEPV Maskinvej 5 - DK-2860 Søborg - Denmark 61246869 Page 116
Revision No. Made by Modification Date Checked by/Date Approved by/Date Project Name Date Pages of 25
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
R01
R02
R03
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
Revision No.
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.
F
E
B
C
A
G
D
116
inpaspla
inpaspla
DKSOCCL
Made by
0
10-08-2017
04-09-2017
07-12-2017
DKSOJPNA
DKSOJPNA
DKSOJPNA
Approved by/Date
Project
Made by
Name
inpagat
2
Date
05-11-2014
3
/83.1
-101A4.1
Overview
U
U
DMS-GND
DMS-GND
AI2-
AI2+
DMS-VCC
DMS-VCC
DMS-GND
DMS-GND
AI1-
AI1+
DMS-VCC
DMS-VCC
26
25
24
23
22
21
16
15
14
13
12
11
X1
/83.1
/83.1
/83.1
5
OVERVIEW DIAGRAM
-101A4.1 ANALOG IO CARDS
7
61246869
Drawing No.:
8
Page
= A1
Pages of
+ CP-P35
9
25
117
&PR/700
0 1 2 3 4 5 6 7 8 9
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
Parts list
A
Device tag Quantity Designation Type number Supplier Part number
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
-101A2 1 X20 bus base,for X20 base module (BC, HB, etc.)&X20 supply module X20BB80 B&R B&R. X20BB80
B -101A2.1 1 X20 Safe Counter, 4xI, 24V, 10kHz X20SD1207 B&R B&R.X20SD1207
-101A2.1 1 X20 Bus safety 25mm,Power Bus connection X20BM33 B&R B&R.X20BM33
-101A2.1 1 X20 terminal block safety, 12x X20TB52 B&R B&R.X20TB52
-101A3 1 X20 Safe Digital 2xI, 24V, 1xI CAT4 X20SI2100 B&R B&R.X20SI2100
-101A3 1 X20 Bus safety 25mm,Power Bus connection X20BM33 B&R B&R.X20BM33
-101A3 1 X20 terminal block safety, 12x X20TB52 B&R B&R.X20TB52
-101A3.1 1 X20 Analog 2xI, RTD, 3 Wire X20AT2222 B&R B&R.X20AT2222
-101A3.1 1 X20 terminal block, 12-pin, 24 V coded X20TB12 B&R B&R. X20TB12
-101A3.1 1 X20 Bus Module with Power Bus connection X20BM11 B&R B&R.X20BM11
-101A3.2 1 X20 Dummy module (zero function) X20ZF0000 BuR BuR.X20ZF0000
C -101A3.3 1 X20 Dummy module (zero function) X20ZF0000 BuR BuR.X20ZF0000
-101A3.4 1 X20 Dummy module (zero function) X20ZF0000 BuR BuR.X20ZF0000
-101A4 1 X20 2-channel condition monitoring module for speed measurement, vibration measurement X20CM2821 B&R B&R.X20CM2821
-101A4 1 X20 terminal block, 12-pin, 24 V coded X20TB12 B&R B&R. X20TB12
-101A4 2 X20 Bus Module with Power Bus connection X20BM11 B&R B&R.X20BM11
-101A4.1 1 X20 Analog 2xI, RTD, 3 Wire X20AI1744 B&R B&R.X20AI1744
-101A4.1 1 X20 terminal block, 12-pin, 24 V coded X20TB12 B&R B&R. X20TB12
-101A4.1 1 X20 Bus Module with Power Bus connection X20BM11 B&R B&R.X20BM11
-101A4.2 1 X20 Dummy module (zero function) X20ZF0000 BuR BuR.X20ZF0000
-101A4.3 1 X20 Dummy module (zero function) X20ZF0000 BuR BuR.X20ZF0000
D -104A1 1 Patch panels - FL-PP-RJ45-SCC 2901642 PHOENIX CONTACT PHO.2901642
-104A5 1 Patch panels - FL-PP-RJ45-SCC 2901642 PHOENIX CONTACT PHO.2901642
-11MP3 1 Mounting Plate Mounting Plate (400 x 210 x 2mm) PANEL BUILDER PANEL BUILDER.----
-11MP4 1 Mounting Plate Mounting Plate (400 x 250 x 2mm) PANEL BUILDER PANEL BUILDER.---
-11U1 1 Grey Cable Duct ---- PANEL BUILDER PANEL BUILDER. ----
-102W6 1 Data Cable -FL CAT6 Patch 0.5-Line 2891288 PHOENIX CONTACT PHO.2891288
-104W1 1 Data Cable -FL CAT6 Patch 0.5-Line 2891288 PHOENIX CONTACT PHO.2891288
-X5 2 Feed-through terminal with spring-cage connection,cross-section: 0.08-4.0mm² ST 2,5 PHOENIX CONTACT PXC.3031212
-X5 2 End clamp- CLIPFIX 35 for NS35/7,5 DIN rail or NS35/15 DIN rail, 9.5mm,GRAY CLIPFIX 35 PHOENIX CONTACT PHO.3022218
-X5 1 Protective conductor double-level terminal block,Cross section: 0.08 mm² - 4 mm² STTB 2,5-TWIN-PE PHOENIX CONTACT PHO.3038532
E -10X1 1 Sensor/actuator flush-type socket, 5-pos.M12 SPEEDCON A-coded SACC-DSI-FS-5CON-PG 9/0,5 SCO PHOENIX CONTACT PHO.1542729
-10X2 1 Sensor/actuator flush-type socket, 5-pos.M12 SPEEDCON A-coded SACC-DSI-FS-5CON-PG 9/0,5 SCO PHOENIX CONTACT PHO.1542729
-10X3 1 Sensor/actuator flush-type socket, 5-pos.M12 SPEEDCON A-coded SACC-DSI-FS-5CON-PG 9/0,5 SCO PHOENIX CONTACT PHO.1542729
-10X4 1 Sensor/actuator flush-type socket, 5-pos.M12 SPEEDCON A-coded SACC-DSI-FS-5CON-PG 9/0,5 SCO PHOENIX CONTACT PHO.1542729
-10X5 1 Sensor/actuator flush-type socket, 5-pos.M12 SPEEDCON A-coded SACC-DSI-FS-5CON-PG 9/0,5 SCO PHOENIX CONTACT PHO.1542729
-10X6 1 Sensor/actuator flush-type socket, 5-pos.M12 SPEEDCON A-coded SACC-DSI-FS-5CON-PG 9/0,5 SCO PHOENIX CONTACT PHO.1542729
-10X7 1 Sensor/actuator flush-type socket, 5-pos.M12 SPEEDCON, shielded, B-coded SACC-DSI-FSB-5CON-L180/SCO SH PHOENIX CONTACT PHO.1553022
-10X7 1 M12 sealing cap for unoccupied sockets of the sensor/actuator cable, boxes& flush-type connectors PROT-M12 PHOENIX CONTACT PHO.1680539
-10X8 1 Sensor/actuator flush-type socket, 5-pos.M12 SPEEDCON A-coded SACC-DSI-FS-5CON-PG 9/0,5 SCO PHOENIX CONTACT PHO.1542729
-10X8 1 M12 sealing cap for unoccupied sockets of the sensor/actuator cable, boxes& flush-type connectors PROT-M12 PHOENIX CONTACT PHO.1680539
F -10X9 1 Sensor/actuator flush-type socket, 5-pos.M12 SPEEDCON A-coded SACC-DSI-FS-5CON-PG 9/0,5 SCO PHOENIX CONTACT PHO.1542729
-10X9 1 M12 sealing cap for unoccupied sockets of the sensor/actuator cable, boxes& flush-type connectors PROT-M12 PHOENIX CONTACT PHO.1680539
-10X11 1 Screw Plug M25x1.5 JACOB JACO.10.2515 M/G
-10X11 1 Hexagonal Locknut M25 x 1.5 locknut JACOB JACO.50.225 M
-10X11 1 Washer Φ 30 mm x 2 mm ---- PANEL BUILDER Panel Builder .----
-10X12 1 Cable Gland M16x1.5 M16x1.5 JACOB JACO.50.616 M/R
-10X12 1 Polyamide Blanking plug - RAL9005 PA6 GF30 JACOB JACO.WJ-DM 12-VPA/SW
-10X12 1 Hexagonal Locknut M16 x 1.5 locknut JACOB JACO.50.216 M
-10X12 1 Washer Φ 30 mm x 2 mm ---- PANEL BUILDER Panel Builder .----
-10X13 1 Cable Gland M16x1.5 M16x1.5 JACOB JACO.50.616 M/R
G
&SCH/117 701
R03 DKSOCCL 07-12-2017 DKSOJPNA DKSOEPV 61246869-80 Plus IO Box Parts List = A1
R02 inpaspla 04-09-2017
Drawing No.:
DKSOJPNA DKSOEPV Made by inpagat 12-12-2017 Alfa Laval Copenhagen A/S -CAT + CP-P35
R01 inpaspla 10-08-2017 DKSOJPNA DKSOEPV Maskinvej 5 - DK-2860 Søborg - Denmark 61246869 Page 700
Revision No. Made by Modification Date Checked by/Date Approved by/Date Project Name Date Pages of 25
0 1 2 3 4 5 6 7 8 9
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
Parts list
A
Device tag Quantity Designation Type number Supplier Part number
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
-10X13 1 Polyamide Blanking plug - RAL9005 PA6 GF30 JACOB JACO.WJ-DM 12-VPA/SW
-10X13 1 Hexagonal Locknut M16 x 1.5 locknut JACOB JACO.50.216 M
-10X13 1 Washer Φ 30 mm x 2 mm ---- PANEL BUILDER Panel Builder .----
-10X14 1 Cable Gland M16x1.5 M16x1.5 JACOB JACO.50.616 M/R
-10X14 1 Polyamide Blanking plug - RAL9005 PA6 GF30 JACOB JACO.WJ-DM 12-VPA/SW
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.
700
R03 DKSOCCL 07-12-2017 DKSOJPNA DKSOEPV 61246869-80 Plus IO Box Parts List = A1
R02 inpaspla 04-09-2017
Drawing No.:
DKSOJPNA DKSOEPV Made by inpagat 12-12-2017 Alfa Laval Copenhagen A/S -CAT + CP-P35
R01 inpaspla 10-08-2017 DKSOJPNA DKSOEPV Maskinvej 5 - DK-2860 Søborg - Denmark 61246869 Page 701
Revision No. Made by Modification Date Checked by/Date Approved by/Date Project Name Date Pages of 25