You are on page 1of 42

0 1 2 3 4 5 6 7 8 9

Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),

A
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.

Alfa Laval Aalborg


Gasvaerksvej 21
9000 Aalborg DK
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

Project/Order Number : 347797 (737079), 347798 (737772), 347799 (737074), 347805 (051508-02), 347806 (101132-02)
Customer/Yard Name : Eastern Pacific Shipping Pte Ltd
C

Hull Number : 403C (Lake Kivu), 404A (Lake Superior), 403A (Lake Taupo), 404D (Triumph), 404F (Lake Como)
Oil Fired Boiler Type : Scrubber Interface Panel - Safety
Oil System : N/A
Oil Type : N/A WHR Type 1: None
Burner Type & Size : KBO-R 14M WHR Type 2: None
D

Norm / Standards / Class Society : ABS Type Of Enclosure : Indoor Use Boiler Plant Enclosure(s), See IP Grade
Compliance : ABS Fabrication Year : See Enclosure Sign For Details
Rated Voltage / Frequency : 440VAC/60Hz Degree Of Protection : IP54
Rated Current : See "Main Power" page EMC - Environment : Makers Standard
E
Protection Device : Main Switch Board, Overcurrent Protection Max. Ambient Temperature : 45ºC
Earth System : ABS Panel Dimension H x W x D : 1000x1000x300
Rated Control Voltage : 230VAC/24VDC Local Control Panel Colour : n/a
Rated Short-Circuit Max. : See Enclosure Sign For Details Power Panel Colour : RAL7035
Rated Short-Circuit Min. : See Enclosure Sign For Details Cables : See Cable Connection Diagrams/Drawings
F

Page: 2
Master Versions: Title page / cover sheet =
DKAAHOD Alfa Laval Aalborg Project Drawing No.:
Revision 2 See Title Page JLE 19-Feb-2019 +
25/07/2019 Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0 Gasvaerksvej 21
105X03: 092144 Next Page: 5
9000 Aalborg DK
Revision No. Rev. Made by/Date Approved by/Date Project Created By Creation Date EEC Version: Pages of: 42
0 1 2 3 4 5 6 7 8 9

Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
Table of contents TableOfContentsALTC_Rev1

A Page Page type Page description Date Edited by


&GR/2 Title page / cover sheet Title page / cover sheet 04/03/2019 Dkaaabh
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.

&GR/5 Table of contents Table of contents : &GR/2 - =SI+L25&Cable Connection/2.b 27/08/2019 DKAAHOD
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.

&GR/5.a Table of contents Table of contents : =SI+L25&Cable Connection/2.c - =SI+L25&Cable Connection/2.e 27/08/2019 DKAAHOD
&Revision Report/1 Revision overview Revision overview : =SI+L25&SCH/4 - =SI+L25&SCH/4 27/08/2019 DKAAHOD
=SI+L25&SCH/1 Graphic Boiler Scrubber Interface Panel Information & Off-Standard issues 19/02/2019 Dkaaabh
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

=SI+L25&SCH/2 Graphic Wire Colours 06/02/2019 Dkaaabh


B
=SI+L25&SCH/3 Panel layout Panel Overview Front & Side View 06/05/2019 dkaajbda
=SI+L25&SCH/4 Schematic multi-line Power Supply 27/08/2019 DKAAHOD
=SI+L25&SCH/10 Schematic multi-line Power Supply 27/08/2019 DKAAHOD
=SI+L25&SCH/11 Schematic multi-line Pilot Voltage 27/08/2019 DKAAHOD
=SI+L25&SCH/12 Schematic multi-line Network Topologi/Overview 14/03/2019 Dkaaabh
=SI+L25&SCH/13 Schematic multi-line PLC CPU & IO Overview 14/03/2019 Dkaaabh

C =SI+L25&SCH/14 Schematic multi-line PLC - A0 20/08/2019 dkaajbda


=SI+L25&SCH/15 Schematic multi-line PLC - IO 24 VDC power supply 20/08/2019 dkaajbda
=SI+L25&SCH/16 Schematic multi-line 4" Operating Panel/HMI 20/08/2019 dkaajbda
=SI+L25&SCH/17 Schematic multi-line Scrubber Panel - PLC A61 - AI 14/03/2019 Dkaaabh
=SI+L25&SCH/18 Schematic multi-line Scrubber Panel - PLC A62 - AO 14/03/2019 Dkaaabh
=SI+L25&SCH/19 Schematic multi-line Scrubber Panel - PLC A63 DI 14/03/2019 Dkaaabh
=SI+L25&SCH/20 Schematic multi-line Scrubber Panel - PLC A64 DI 14/03/2019 Dkaaabh
D
=SI+L25&SCH/21 Schematic multi-line Scrubber Panel - PLC A65 DO 14/03/2019 Dkaaabh
=SI+L25&SCH/22 Schematic multi-line Scrubber Panel - PLC A66 DO 14/03/2019 Dkaaabh
=SI+L25&SCH/23 Schematic multi-line Scrubber Panel - PLC A67 DO 14/03/2019 Dkaaabh
=SI+L25&SCH/24 Schematic multi-line Control - Analog Input - Uptake Pressure Safety and Control 27/08/2019 DKAAHOD
=SI+L25&SCH/25 Schematic multi-line Control - Analog Input - Burner Load 14/03/2019 Dkaaabh
=SI+L25&SCH/26 Schematic multi-line Control - Analog Input - Panel Temperature 20/08/2019 dkaajbda
=SI+L25&SCH/27 Schematic multi-line Control - Analog Output - Uptakedamper/VFD and Burner Load 27/08/2019 DKAAHOD
E
=SI+L25&SCH/28 Schematic multi-line Control - Digital Input - EGCS 27/08/2019 DKAAHOD
=SI+L25&SCH/29 Schematic multi-line Control - Digital Input - EGCS 27/08/2019 DKAAHOD
=SI+L25&SCH/30 Schematic multi-line Control - Digital Input - VFD 27/08/2019 DKAAHOD
=SI+L25&SCH/31 Schematic multi-line EGC System 1 - Interface DI 27/08/2019 DKAAHOD
=SI+L25&SCH/32 Schematic multi-line EGC System 1 - Interface DI 25/07/2019 DKAAHOD
=SI+L25&SCH/33 Schematic multi-line EGC System 1 - Interface DQ 27/08/2019 DKAAHOD

F =SI+L25&SCH/34 Schematic multi-line EGC System 1 - Interface DQ 20/08/2019 dkaajbda


=SI+L25&SCH/35 Schematic multi-line EGC System 1 - Potential Free to EGCS 15/03/2019 Dkaaabh
=SI+L25&SCH/36 Schematic multi-line EGC System 1 - Potential Free to LCP 1 27/08/2019 DKAAHOD
=SI+L25&SCH/37 Schematic multi-line EGC System 1 - Potential Free to AMS 14/03/2019 Dkaaabh
=SI+L25&Cable Connection/2 Cable-connection diagram Cable-connection diagram =SI+L25-W0 =SI+L25-W4 =SI+L25-W5 =SI+L25-W6 27/08/2019 DKAAHOD
=SI+L25&Cable Connection/2.a Cable-connection diagram Cable-connection diagram =SI+L25-W9 =SI+L25-W11 =SI+L25-W13 27/08/2019 DKAAHOD
=SI+L25&Cable Connection/2.b Cable-connection diagram Cable-connection diagram =SI+L25-W14 =SI+L25-W15 =SI+L25-W16 27/08/2019 DKAAHOD
G

2 Page: 5
Master Versions: Table of contents : &GR/2 - =
DKAAHOD Alfa Laval Aalborg Project Drawing No.:
Revision 2 See Title Page JLE 19-Feb-2019 =SI+L25&Cable Connection/2.b +
25/07/2019 Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0 Gasvaerksvej 21
105X03: 092144 Next Page: 5.a
9000 Aalborg DK
Revision No. Rev. Made by/Date Approved by/Date Project Created By Creation Date EEC Version: Pages of: 42
0 1 2 3 4 5 6 7 8 9

Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
Table of contents TableOfContentsALTC_Rev1

A Page Page type Page description Date Edited by


=SI+L25&Cable Connection/2.c Cable-connection diagram Cable-connection diagram =SI+L25-W18 =SI+L25-W19 =SI+L25-W22 =SI+L25-W23 =SI+L25-W24 27/08/2019 DKAAHOD
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.

=SI+L25&Cable Connection/2.d Cable-connection diagram Cable-connection diagram =SI+L25-W24 =SI+L25-W25 27/08/2019 DKAAHOD
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.

=SI+L25&Cable Connection/2.e Cable-connection diagram Cable-connection diagram =SI+L25-W25 27/08/2019 DKAAHOD


Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

5 Page: 5.a
Master Versions: Table of contents : =SI+L25&Cable =
DKAAHOD Alfa Laval Aalborg Project Drawing No.:
Revision 2 See Title Page JLE 19-Feb-2019 Connection/2.c - =SI+L25&Cable +
25/07/2019 Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0 Gasvaerksvej 21
Connection/2.e 105X03: 092144 &Revision Report/1
Next Page:
9000 Aalborg DK
Revision No. Rev. Made by/Date Approved by/Date Project Created By Creation Date EEC Version: Pages of: 42
0 1 2 3 4 5 6 7 8 9

Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
Revision overview Revision Form 1_Rev1

Revision name Revision comment Reason for revision change Page name Revision description Creator Date
A

Revision 2 =SI+L25&SCH/4 As-built update DKAAHOD 27/08/2019


or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.

Revision 2 =SI+L25&SCH/10 As-built update DKAAHOD 27/08/2019


This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.

Revision 2 =SI+L25&SCH/11 As-built update DKAAHOD 27/08/2019

Revision 2 =SI+L25&SCH/24 As-built update DKAAHOD 27/08/2019


Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

Revision 2 =SI+L25&SCH/27 As-built update DKAAHOD 27/08/2019


B

Revision 2 =SI+L25&SCH/28 As-built update DKAAHOD 27/08/2019

Revision 2 =SI+L25&SCH/29 As-built update DKAAHOD 27/08/2019

Revision 2 =SI+L25&SCH/30 As-built update DKAAHOD 27/08/2019

Revision 2 =SI+L25&SCH/31 As-built update DKAAHOD 27/08/2019

Revision 2 =SI+L25&SCH/33 As-built update DKAAHOD 27/08/2019


C

Revision 2 =SI+L25&SCH/36 As-built update DKAAHOD 27/08/2019


ON347797, -98, -99 and ON347805 added to drawing ON347797, -98, -99 and ON347805 added to drawing and supply voltage
Revision 1 &GR/5 dkaajbda 28/05/2019
and supply voltage changes from 230V to 440V. changes from 230V to 440V.
ON347797, -98, -99 and ON347805 added to drawing ON347797, -98, -99 and ON347805 added to drawing and supply voltage
Revision 1 &GR/5.a dkaajbda 28/05/2019
and supply voltage changes from 230V to 440V. changes from 230V to 440V.
ON347797, -98, -99 and ON347805 added to drawing
Revision 1 &GR/5.a New page created dkaajbda 28/05/2019
and supply voltage changes from 230V to 440V.
ON347797, -98, -99 and ON347805 added to drawing
Revision 1 &Revision Report/1 New page created dkaajbda 28/05/2019
and supply voltage changes from 230V to 440V.
D
ON347797, -98, -99 and ON347805 added to drawing ON347797, -98, -99 and ON347805 added to drawing and supply voltage
Revision 1 &GR/5 dkaajbda 28/05/2019
and supply voltage changes from 230V to 440V. changes from 230V to 440V.
ON347797, -98, -99 and ON347805 added to drawing ON347797, -98, -99 and ON347805 added to drawing and supply voltage
Revision 1 &GR/5.a dkaajbda 28/05/2019
and supply voltage changes from 230V to 440V. changes from 230V to 440V.
ON347797, -98, -99 and ON347805 added to drawing ON347797, -98, -99 and ON347805 added to drawing and supply voltage
Revision 1 &Revision Report/1 dkaajbda 28/05/2019
and supply voltage changes from 230V to 440V. changes from 230V to 440V.
ON347797, -98, -99 and ON347805 added to drawing ON347797, -98, -99 and ON347805 added to drawing and supply voltage
Revision 1 =SI+L25&SCH/4 dkaajbda 28/05/2019
and supply voltage changes from 230V to 440V. changes from 230V to 440V.
ON347797, -98, -99 and ON347805 added to drawing ON347797, -98, -99 and ON347805 added to drawing and supply voltage
Revision 1 =SI+L25&SCH/10 dkaajbda 28/05/2019
and supply voltage changes from 230V to 440V. changes from 230V to 440V.
E
ON347797, -98, -99 and ON347805 added to drawing ON347797, -98, -99 and ON347805 added to drawing and supply voltage
Revision 1 =SI+L25&Cable Connection/2 dkaajbda 28/05/2019
and supply voltage changes from 230V to 440V. changes from 230V to 440V.
ON347797, -98, -99 and ON347805 added to drawing ON347797, -98, -99 and ON347805 added to drawing and supply voltage
Revision 1 =SI+L25&Cable Connection/2.a dkaajbda 28/05/2019
and supply voltage changes from 230V to 440V. changes from 230V to 440V.
ON347797, -98, -99 and ON347805 added to drawing ON347797, -98, -99 and ON347805 added to drawing and supply voltage
Revision 1 =SI+L25&Cable Connection/2.b dkaajbda 28/05/2019
and supply voltage changes from 230V to 440V. changes from 230V to 440V.
ON347797, -98, -99 and ON347805 added to drawing ON347797, -98, -99 and ON347805 added to drawing and supply voltage
Revision 1 =SI+L25&Cable Connection/2.c dkaajbda 28/05/2019
and supply voltage changes from 230V to 440V. changes from 230V to 440V.
ON347797, -98, -99 and ON347805 added to drawing ON347797, -98, -99 and ON347805 added to drawing and supply voltage
Revision 1 =SI+L25&Cable Connection/2.d dkaajbda 28/05/2019
and supply voltage changes from 230V to 440V. changes from 230V to 440V.
F
ON347797, -98, -99 and ON347805 added to drawing ON347797, -98, -99 and ON347805 added to drawing and supply voltage
Revision 1 =SI+L25&Cable Connection/2.e dkaajbda 28/05/2019
and supply voltage changes from 230V to 440V. changes from 230V to 440V.
ON347797, -98, -99 and ON347805 added to drawing
Revision 1 =SI+L25&SCH/4 New page created dkaajbda 28/05/2019
and supply voltage changes from 230V to 440V.
ON347797, -98, -99 and ON347805 added to drawing
Revision 1 =SI+L25&SCH/4 New page created dkaajbda 28/05/2019
and supply voltage changes from 230V to 440V.
ON347797, -98, -99 and ON347805 added to drawing
Revision 1 =SI+L25&SCH/4 New page created dkaajbda 28/05/2019
and supply voltage changes from 230V to 440V.

&GR/5.a Page: 1
Master Versions: Revision overview : =SI+L25&SCH/4 - =
DKAAHOD Alfa Laval Aalborg Project Drawing No.:
Revision 2 See Title Page JLE 19-Feb-2019 =SI+L25&SCH/4 +
25/07/2019 Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0 Gasvaerksvej 21
105X03: 092144 Next Page:=SI+L25&SCH/1
9000 Aalborg DK
Revision No. Rev. Made by/Date Approved by/Date Project Created By Creation Date EEC Version: Pages of: 42
0 1 2 3 4 5 6 7 8 9

Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),

A
Scrubber Interface (SI) Panel
Additional Information
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.

Terminals: Panel Connection NB - Off-standard Information:

X0: Communication Component Type Description


X1: 230 VAC Internal Distribution
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

X2: 24 VDC Internal Distribution


Actual Terminal: A Equipment Group : Amplifier, PLC,...
B
X8: In Panel
X9: In Panel Combustion air fan B Sensors

C Condensator

E Lightning Equipment, Heating Equipment..


Layer 2
F Protection : Circuit Breaker,Fuse,
Therm. Overload Relay,..
Layer 1
Wire(s) Colour:
G Generator, Power Supply`s, Fan,..
C See "Wire Colour Sheet"
H Signaling Device,..
Yard Connection
Wire(s) Numbering: K Contactor
External Component Placement:
Potential Numbering: K Relay
External components are structured in boxes, and are showing the actual
Ex.: "FOP1" - Meaning "Fuel Oil Pump 1"
position number for each component, according to PI diagrams
Other wires are numbered: M Motors
Terminal numbers shown in customers equipment etc. OFB/EGCS are only examples!
Ex.: 051, 052, 053 etc.
Number On Page Tag Numbers: Q Power Switch Gear:
Load Switch Breaker,
Page No. Motor Circuit Breaker,...
Page no. Tagnumbers shown for external components are not stamped with position
D
numbers according to list of parts.
Tagnumbers on cable reports and PI diagrams have R Resistance,Rheostat,...
position numbers in front of the tag number.
Cables/Connection: S Electrical Equipment For Control Circuits:
Motors Rotational Direction: Switch, Push Button, Limit Switch,...
NB. Cables Marked with * or 1W
Are Prewired By ALFA LAVAL AALBORG All Motors, Shall Have Correct Rotational Direction* T Transformer,...
Change Of Direction Can Be Done According To Below Scheme`s:
Cables to tag no.: All cables with screen, U Transducer : Electrical / Electrical Quantity
must be seperate cables as shown in drawings/cable connection Y/D Motors: D.O.L Motors: Frequency Controller,Softstarter,Transducer,
E
Motor Motor Special Equipment,..
Other cables marked W(and a number 1-?), Terminals U1 V1 W1 U2 V2 W2 Terminals U1 V1 W1
yard can chose to collect into multiple multi-core cables. Motor Motor X Terminal Blocks,Connectors,Socket,...
Etc. 12-wire multicore or 18-wire multicore... Rotation Rotation
Right** Right**
Y Electrical Controlled Mechanical Device:
Cable Routing: Valve,Brake,...
Cable runs shall be installed well clear of substantial heat sources. L1 L2 L3 L2 L3 L1
L1 L2 L3
Power cables and signal cables,
must be held with respect distance to one another
according to applicable standard(s).
Component Labeling:
F Motor Motor
Vibration:
Terminals U1 V1 W1 U2 V2 W2 Terminals U1 V1 W1
Maximun Vibration Values Motor Motor A1 13 11
100 GAL At 10-30 Hz Rotation Rotation In Connection
Left** Left** -K4 -K4 -K4
1 GAL = 0,01 m/Sek Diagram (Example):
A2 14 12

Setpoints: L3 L2 L1 L2 L1 L3
L3 L2 L1
Setpoints For Motor Protection
Shall be Set To Operation Current (In) Component Type
Maximum Setpoint Is 110%
G *To Be Checked/Corrected By Customer Component No.
**Seen At The Shaft Driving End Of The Motor

=+&Revision Report/1 Page: 1


Master Versions: Boiler Scrubber = SI
DKAAHOD Alfa Laval Aalborg Project Drawing No.:
Revision 2 See Title Page JLE 19-Feb-2019 Interface Panel Information + L25
25/07/2019 Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0 Gasvaerksvej 21
& Off-Standard issues 105X03: 092144 Next Page: 2
9000 Aalborg DK
Revision No. Rev. Made by/Date Approved by/Date Project Created By Creation Date EEC Version: Pages of: 42
0 1 2 3 4 5 6 7 8 9

Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),

A
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.

Wire Colour Wire Code Application mm² Marking Comments


Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

With VFD Always


B
Black BK AC and DC Power Circuits Min. 0,75 Use Cable With Screen

Green / Yellow GNYE Earth ( PE ) Min. 0,75

Light Blue BU N ( 230 VAC ) Min. 0,75

White WH DC Control Circuits Min. 0,75


C

Red RD AC Control Circuits Min. 0,75

Orange OG Foreign Voltage Min. 0,75 Remember: Permanent Warning Label(s)

NB. Colour identification using combination of those colours listed above may be used
For safety reasons, the colour Green or the colour Yellow may not be used except in the bicolour combination Green and Yellow (PE)

1 Page: 2
Master Versions: Wire Colours = SI
DKAAHOD Alfa Laval Aalborg Project Drawing No.:
Revision 2 See Title Page JLE 19-Feb-2019 + L25
25/07/2019 Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0 Gasvaerksvej 21
105X03: 092144 Next Page: 3
9000 Aalborg DK
Revision No. Rev. Made by/Date Approved by/Date Project Created By Creation Date EEC Version: Pages of: 42
0 1 2 3 4 5 6 7 8 9

Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),

Control panel - Scrubber interface (SI) 1L25


A
1000 mm
PANEL: Rittal 1000 x 1000 x 300
COLOUR: RAL 7035
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.

PANEL WEIGHT: KG (+/-15%)


This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.

TAG NO. (PI STEAM/WATER): 1L25


U0 Operating Panel 4" HMI
CLASS: IP54

S1 Emergency Stop Push Button


U0
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

SIEMENS SIMATIC HMI

B
Mounting brackets S2 EMG. Operation Scrubber Key Switch

Q0 Main Switch Switch

P1 Combustion Air Fan AMP


10 mm P1

1000 mm
A
10 mm

S2 S1 g en
er

Em

cy
S t o p

C
Q0

SIDE VIEW SIDE


R VIEW
15 85 mm
m
D m
TOP VIEW
1000 mm
85 mm 50 mm 50 mm

85 mm
R

300 mm
8
m
m
E

1000 mm
BOTTOM VIEW
F

300 mm
G

2 Page: 3
Master Versions: Panel Overview Front & Side View = SI
DKAAHOD Alfa Laval Aalborg Project Drawing No.:
Revision 2 See Title Page JLE 19-Feb-2019 + L25
25/07/2019 Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0 Gasvaerksvej 21
105X03: 092144 Next Page: 4
9000 Aalborg DK
Revision No. Rev. Made by/Date Approved by/Date Project Created By Creation Date EEC Version: Pages of: 42
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.

Revision 2
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

F
E
B

C
A

G
D

3
DKAAHOD
25/07/2019
0

=MSB+

Revision No. Rev. Made by/Date Approved by/Date


-W0
-Q0
1

2
1

BOARD

P: 2 kW

Project
U: 440 V
4
3

See Title Page


MAIN SWITCH
Switch Board

JLE

Created By
2

19-Feb-2019

Creation Date EEC Version:


3

-Q3

Master Versions:
4A
-F8
-T3
1000 VA
440/230 V

44 42
I>

2
1
3
1
1/L1

2/T1
4

I>

4
3
3/L2

4/T2

45
I>

4
2
5/L3

6/T3

Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0


43
L_A / 10.1
N_A / 10.1
5

Gasvaerksvej 21
9000 Aalborg DK
Alfa Laval Aalborg
6

Power Supply
7

105X03: 092144
8

Project Drawing No.:


= SI
+ L25

Pages of:
Next Page:
9

Page:
4

42
10
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.

Revision 2
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

F
E
B

C
A

G
D

4
DKAAHOD
25/07/2019
0

+PF

4.4 /
4.4 /

N_A
L_A
-S1

Revision No. Rev. Made by/Date Approved by/Date


L
1

12
11

Project
N
22
21

See Title Page


JLE

Created By
2

19-Feb-2019
L

Creation Date EEC Version:


-M1.1
3

2
1

1~

Master Versions:
2A
-F1

-M1

104 103
4

2
1
2
1

1~

104

104
4
3

Ventilation Fan

Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0


L

2A
-F2

1L
5

2
1

1N
4
3

1N
-X1

Gasvaerksvej 21
9000 Aalborg DK
Alfa Laval Aalborg
1L-X1 2 1L
1 1N

Internal
230 VAC Supply
1L / 33.0
1N / 33.0
6

Power Supply
2A
-F3

2L
7

2
1

2N
4
3

-X1
-X1

4 2L
3 2N

External
230 VAC
2L / 28.0
2N / 28.0

105X03: 092144
8

Project Drawing No.:


= SI
+ L25

Pages of:
Next Page:
9

L / 11.0

N / 11.0

42
11
Page: 10
0 1 2 3 4 5 6 7 8 9

Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), L
10.9 / L

N
10.9 / N
A

N
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.

1 3
-F4
2A 2 4

112
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

112
B

111
E1+

112

E1+
113
PE

-T1 L N PE -F5 +24V +24V


(1) INPUT (2)

E1+
230VAC/24VDC 5 A PWM
C
120W
OUTPUT Adjust
OUTPUT LOW
OUTPUT OK
CP-E 24/5.0
L+ L+ CP-E 24/5.0 DELAY I_OUT I_OUT I_OUT I_OUT
1,5 2 1,5 2 1,5 2 1,5 2

..
A B 1 2,5 1 2,5 1 2,5 1 2,5


0,5 3 0,5 3 0,5 3 0,5 3
E1+

E1+ 0 3A 3A 3A 3A

RESET RESET RESET RESET


D

CONTROL LOGIC
only if the relay
module is missing
0VDC

RESET
OUTPUT
on the Siemens 14 12 11 RST
0V
(1)
0V
(2)
1 2 3 4

E
control power
module

E11

E21

E31

E41
0VDC
0VDC

-X2 1 -X2 2 -X2 3 -X2 4 -X2 5

F
24 VDC -Selectiviti module

0VDC E1+ E2+ E3+ E4+


/20.5 16.0 24.0 15.0 14.0 16.0
-A64
7
DI7
8
-A64:8

-A64:8

Internal IO Supply CPU HMI


G
Control Circuits Supply

10 Page: 11
Master Versions: Pilot Voltage = SI
DKAAHOD Alfa Laval Aalborg Project Drawing No.:
Revision 2 See Title Page JLE 19-Feb-2019 + L25
25/07/2019 Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0 Gasvaerksvej 21
105X03: 092144 Next Page: 12
9000 Aalborg DK
Revision No. Rev. Made by/Date Approved by/Date Project Created By Creation Date EEC Version: Pages of: 42
0 1 2 3 4 5 6 7 8 9

-A0
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
PLC/CPU
/13.1

BA 2xFC

CPU PLC
CPU XXXXXX-XX-X
A
R/S ER MT

X1P1R X1P2R
PROFINET (LAN)
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.

X1P3
PROFINET
(LAN)

yyyyyxxxxxyyyyyy
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

LK1
B LK2 ALTC PLC

LK3

PWR

RUN
MAC ADDRESS
-A0:LAN1 STOP
MRES
-A0:LAN2
NB. Cat.6 Ethernet Cable Required
X80
For Cable Connection
24VDC
See also Page: Ethernetswitch
C
X50 & External Components
PUSH
1L+ 1M

2L+ 2M

IO
-A60 Interface +PF
/13.5 RJ-45
D
-U0 X1:P1
Bus Adapter
Interface
Module

DIAG

-A1:LAN1
-A1:LAN2

PWR

HMI On Front
F

11 Page: 12
Master Versions: Network Topologi/Overview = SI
DKAAHOD Alfa Laval Aalborg Project Drawing No.:
Revision 2 See Title Page JLE 19-Feb-2019 + L25
25/07/2019 Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0 Gasvaerksvej 21
105X03: 092144 Next Page: 13
9000 Aalborg DK
Revision No. Rev. Made by/Date Approved by/Date Project Created By Creation Date EEC Version: Pages of: 42
0 1 2 3 4 5 6 7 8 9

Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),

-A0 -A60 -A61 -A62 -A63 -A64 -A65 -A66 -A67 -A68
A

Bus Adapter AI ST AQ ST DI SRC BA DI SRC BA RQ NO ST RQ NO ST RQ NO ST


BA 2xFC Interface Server
CPU XXXXXX-XX-X Module 4xI 2-/4-wire 2xI 8x24VDC 8x24VDC 120/230VAC/5A 120/230VAC/5A 120/230VAC/5A Mod
CPU PLC
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.

DIAG DIAG DIAG DIAG DIAG DIAG DIAG DIAG


R/S ER MT
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.

X1P1R X1P2R
PROFINET (LAN)

X1P3
PROFINET
(LAN)
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

yyyyyxxxxxyyyyyy

AI0 AI1 AQ0 AQ1 .0 .1 .0 .1 .0 .1 .0 .1 .0 .1


LK1 .2 .3 .2 .3
AI2 AI3 .2 .3 .2 .3 .2 .3
LK2 ALTC PLC .4 .5 .4 .5
.6 .7 .6 .7

LK3

PWR PWR CC03 PWR CC00 PWR CC02 PWR CC02 PWR CC00 PWR CC00 PWR CC00
PWR

RUN
1 2 1 2 1 2 1 2
STOP 1 2 1 2 1 2
MAC ADDRESS
MRES
C 3 4 3 4 3 4 3 4
3 4 3 4 3 4
5 6 5 6 5 6 5 6
5 6 5 6 5 6
X80
7 8 7 8 7 8 7 8
24VDC
7 8 7 8 7 8
X50 9 10 9 10 9 10 9 10

9 10 9 10 9 10
11 12 11 12 11 12 11 12
PUSH
11 1211 1211 12
1L+ 1M
13 14 13 14 13 14 13 14
1 1 1 1 1 1

15 16 15 16 15 16 15 16 L N L N L N
2 2 2 2 2 2

L+ M L+ M L+ M L+ M L N L N L N

2L+ 2M

D
AI4(I) 2 AQ DI8 DI8 RQ4 RQ4 RQ4 END

/12.0 /25.1 /18.2 /30.1 /11.3 /33.1 /33.5 /34.1


CPU /15.1 /26.7 /27.1 /30.3 /31.1 /33.2 /33.6 /34.2
/26.7 /27.5 /28.1 /31.3 /33.3 /33.7 /34.3
/15.2 /28.5 /31.5 /33.4 /33.8 /34.4
/17.2 /29.1 /32.1 /15.3 /33.5 /15.5
/12.0
/24.1 /29.3 /32.3 /21.2 /33.6 /23.2
/14.1
/25.1 /28.7 /32.5 /33.7
/24.6 /29.7 /32.7 /33.8
/19.1 /20.1 /15.4
/22.2

12 Page: 13
Master Versions: PLC CPU & IO Overview = SI
DKAAHOD Alfa Laval Aalborg Project Drawing No.:
Revision 2 See Title Page JLE 19-Feb-2019 + L25
25/07/2019 Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0 Gasvaerksvej 21
105X03: 092144 Next Page: 14
9000 Aalborg DK
Revision No. Rev. Made by/Date Approved by/Date Project Created By Creation Date EEC Version: Pages of: 42
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.

Revision 2
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

F
E
B

C
A

G
D

13
14.3 /
11.8 /

DKAAHOD
E3+

0VDC

25/07/2019
0

Revision No. Rev. Made by/Date Approved by/Date


0VDC

/13.1
-A0
1

Project
See Title Page
-X1/P3
-X80
1

1
1M

TD

JLE

Created By
-X1/P3
-X80
2

2
1M
2

TD_N
ALTC CPU - Xyyy

-X1/P3

19-Feb-2019
-X80
0VDC

3
RD
2L+

-X1/P3
-X80

Creation Date EEC Version:


5

6
3

1L+

RD_N
Ethernet

Ext Mem

Master Versions:
0VDC / 14.0
4

Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0


LAN1
-X1:P1
BA 2xRJ45
5

-X1:P2

Gasvaerksvej 21
9000 Aalborg DK
Alfa Laval Aalborg
6

PLC - A0
-X1/P2
-X1/P1

1
1

TD
TD

-X1/P2
-X1/P1

2
2

LAN1
TD_N
TD_N
7

-X1/P2
-X1/P1

3
3

RD
RD

-X1/P2
-X1/P1

4
4

RD_N
RD_N

105X03: 092144
8

Project Drawing No.:


= SI
+ L25

Pages of:
Next Page:
9

LAN1 / 16.0

42
15
Page: 14
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.

Revision 2
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

F
E
B

C
A

G
D

14
15.6 /
11.7 /

DKAAHOD
E2+

0VDC

25/07/2019
0

/13.5
-A60
0VDC
1L+

Revision No. Rev. Made by/Date Approved by/Date


2L+ 151
1

(PP1)
Module
1M

Remote IO

Project
2M 152

See Title Page


151

JLE
/13.5
-A61

Created By
152

151
2

L+

AI4(I)
Module

152
M-

19-Feb-2019
Analog Input
0VDC

Creation Date EEC Version:


/13.7
-A65
3

153
1L 2L

RQ4
Module

0VDC

Master Versions:
Digital Output

154
1N 2N
153

/13.7
-A66
4

154

153
155
1L 2L

Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0


RQ4
Module

154
Digital Output

0VDC
1N 2N
155

/13.8
-A67
5

155
0VDC

1L 2L

RQ4
Module

Gasvaerksvej 21
9000 Aalborg DK
Alfa Laval Aalborg
Digital Output
1N 2N
0VDC
6

0VDC / 15.0
7

PLC - IO 24 VDC power supply

105X03: 092144
8

Project Drawing No.:


= SI
+ L25

Pages of:
Next Page:
9

42
16
Page: 15
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.

Revision 2
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

F
E
B

C
A

G
D

15
11.5 /

14.9 /
11.9 /

DKAAHOD
LAN1
E4+

0VDC

25/07/2019
0

Revision No. Rev. Made by/Date Approved by/Date


-U0
1

Project
See Title Page
-X80:+ -X80:-

JLE
X80 - Power Supply

0VDC

Created By
LAN1
2

0VDC / 24.0

19-Feb-2019
-PE

-PE

Creation Date EEC Version:


NB. Cat. 5E Profinet
3

4" Operating Panel/HMI

Master Versions:
LAN1
-X1:P1
X1 - Profinet (LAN)
4

Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0


5

Gasvaerksvej 21
9000 Aalborg DK
Alfa Laval Aalborg
6

4" Operating Panel/HMI


7

105X03: 092144
8

Project Drawing No.:


= SI
+ L25

Pages of:
Next Page:
9

42
17
Page: 16
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.

Revision 2
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

F
E
B

C
A

G
D

16
DKAAHOD
25/07/2019
1

/13.5
-A61

Revision No. Rev. Made by/Date Approved by/Date


2

UV0
9

Project
See Title Page
2I0+
13

JLE

Created By
3

UV1
10

19-Feb-2019
2I1+
/24.6
14

Pressure In
Uptake Control

Creation Date EEC Version:


4

UV2
11

Analog Input Card


2I2+

Master Versions:
15
5

UV3
12

Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0


2I3+
16
6

1I0+
/24.1
1

Pressure In
Uptake Safety

Gasvaerksvej 21
9000 Aalborg DK
Alfa Laval Aalborg
1I1+
2
7

1I2+
/25.1
3
1I3+
/26.7
4

Panel
Burner Load Temperature
8

1I0-

Scrubber Panel - PLC A61 - AI


/24.1
5
1I1-
6

105X03: 092144
9

1I2-
/25.1
7

Project Drawing No.:


1I3-
/26.7
8

= SI
+ L25

Pages of:
Next Page:
10

42
18
Page: 17
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.

Revision 2
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

F
E
B

C
A

G
D

17
DKAAHOD
25/07/2019
1

/13.6
-A62

Revision No. Rev. Made by/Date Approved by/Date


2

Q0+
/27.1
1

Project
Boiler/VFD
Speed Control

See Title Page


Uptake Damper
Q0-
5

JLE

Created By
3

Q1+
/27.5
2

Analog Output Card


EGCS
Burner Load to

19-Feb-2019
Q1-
6

Creation Date EEC Version:


4

RES
3
RES

Master Versions:
7
5

RES
9

Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0


RES
11
6

RES
13

Gasvaerksvej 21
9000 Aalborg DK
Alfa Laval Aalborg
RES
15
7

RES
4
RES
8
8

RES

Scrubber Panel - PLC A62 - AO


10
RES
12

105X03: 092144
9

RES
14

Project Drawing No.:


RES
16

= SI
+ L25

Pages of:
Next Page:
10

42
19
Page: 18
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.

Revision 2
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

F
E
B

C
A

G
D

18
/13.6
-A63

DKAAHOD
25/07/2019
1

DI0
/28.1
1

OK to start (E1)
DI1
/28.5
2

Revision No. Rev. Made by/Date Approved by/Date


EGCS (I1)
EMG. Operation
2

Project
DI2
/29.1
3

See Title Page


Digital Input Card
Closed (E3)
Damper (K66)

JLE

Created By
DI3
/29.3
4

Open (E4)
3

Damper (K66)

19-Feb-2019
DI4
/28.7
5

(E2)
Stop Burner

Creation Date EEC Version:


4

DI5
/29.7
6

Open (E6)
Damper (K65)

Master Versions:
DI6
/30.1
7

VFD
Fault/Overload
5

DI7
/30.3
8

Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0


VFD Running
M
9
6

Gasvaerksvej 21
9000 Aalborg DK
Alfa Laval Aalborg
10
7

M
11
M
12

Scrubber Panel - PLC A63 DI


8

M
13
M
14

105X03: 092144
9

Project Drawing No.:


M
15

= SI
+ L25

Pages of:
Next Page:
M
10

16

42
20
Page: 19
1 2 3 4 5 6 7 8 9 10

Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),

A
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.

Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

B
-A64 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
/13.6 DI0 DI1 DI2 DI3 DI4 DI5 DI6 DI7 M M M M M M M M
/31.1 /31.3 /31.5 /32.1 /32.3 /32.5 /32.7 /11.3

Burner Running Fuel Supply Fuel Supply Fuel Supply Fuel Supply 24 VDC
Oil Fired Boiler Oil Valves Open Burner In From Tank 1 From Tank 2 From Tank 3 From Tank 4 -Selectiviti
Start/Stop (B1) (B3) Shutdown (B4) (B5) (B6) (B7) (B8) module

Digital Input Card


C

19 Page: 20
Master Versions: Scrubber Panel - PLC A64 DI = SI
DKAAHOD Alfa Laval Aalborg Project Drawing No.:
Revision 2 See Title Page JLE 19-Feb-2019 + L25
25/07/2019 Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0 Gasvaerksvej 21
105X03: 092144 Next Page: 21
9000 Aalborg DK
Revision No. Rev. Made by/Date Approved by/Date Project Created By Creation Date EEC Version: Pages of: 42
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.

Revision 2
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

F
E
B

C
A

G
D

20
DKAAHOD
25/07/2019
1

/13.7
-A65

Revision No. Rev. Made by/Date Approved by/Date


2

RQ0+
/33.1
1

Start/Stop

Project
Boiler (B1)

See Title Page


RQ0-
/33.1

JLE
5

Created By
3

RQ1+
/33.2
2

19-Feb-2019
Boiler In
Shutdown (B4)

Digital Output Card 230VAC


RQ1-
/33.2

Creation Date EEC Version:


6
4

RQ2+
/33.3
3

Master Versions:
Start VFD
5

RQ2-
/33.3
7

Outlet
F253 Burner 2

Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0


RQ3+
/33.4
4

(B3)
Oilvalves Open
Burner Running
6

RQ3-
/33.4
8

Outlet
F253 Burner 2

Gasvaerksvej 21
9000 Aalborg DK
Alfa Laval Aalborg
1L

9
1L

RES
7

2L
2L

11
RES
1N
8

Scrubber Panel - PLC A65 DO


10
1N

RES
2N

12
2N

RES

105X03: 092144
9

Project Drawing No.:


= SI
+ L25

Pages of:
Next Page:
10

42
22
Page: 21
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.

Revision 2
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

F
E
B

C
A

G
D

21
DKAAHOD
25/07/2019
1

/13.7
-A66

Revision No. Rev. Made by/Date Approved by/Date


2

RQ0+
/33.5
1

(B5)

Project
Fuel Supply
From Tank 1

See Title Page


RQ0-
/33.5

JLE
5

Created By
3

RQ1+
/33.6
2

(B6)

19-Feb-2019
Fuel Supply
From Tank 2

Digital Output Card 230VAC


RQ1-
/33.6

Creation Date EEC Version:


6
4

RQ2+
/33.7
3

(B7)

Master Versions:
Fuel Supply
From Tank 3
5

RQ2-
/33.7
7

Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0


RQ3+
/33.8
4

(B8)
Fuel Supply
From Tank 4
6

RQ3-
/33.8
8

Gasvaerksvej 21
9000 Aalborg DK
Alfa Laval Aalborg
1L

9
1L

RES
7

2L
2L

11
RES
1N
8

Scrubber Panel - PLC A66 DO


10
1N

RES
2N

12
2N

RES

105X03: 092144
9

Project Drawing No.:


= SI
+ L25

Pages of:
Next Page:
10

42
23
Page: 22
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.

Revision 2
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

F
E
B

C
A

G
D

22
DKAAHOD
25/07/2019
1

/13.8
-A67

Revision No. Rev. Made by/Date Approved by/Date


2

RQ0+
/34.1
1

Project
Stop Burner

See Title Page


RQ0-
/34.1

JLE
5

Created By
3

RQ1+
/34.2
2

Burner

19-Feb-2019
Shutdown

Digital Output Card 230VAC


RQ1-
/34.2

Creation Date EEC Version:


6
4

RQ2+
/34.3
3

Warning

Master Versions:
5

RQ2-
/34.3
7

Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0


RQ3+
/34.4
4

Alarm
6

RQ3-
/34.4
8

Gasvaerksvej 21
9000 Aalborg DK
Alfa Laval Aalborg
1L

9
1L

RES
7

2L
2L

11
RES
1N
8

Scrubber Panel - PLC A67 DO


10
1N

RES
2N

12
2N

RES

105X03: 092144
9

Project Drawing No.:


= SI
+ L25

Pages of:
Next Page:
10

42
24
Page: 23
0 1 2 3 4 5 6 7 8 9

Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),

Pressure In Uptake Safety Pressure In Uptake Control


-X8:4
A

/17.6 /17.4
-A61 -A61
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.

1I0+ 1I0- 2I1+


This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.

1 5 14
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

-A61:13

-A61:5
B

-U1 -U4
/36.1
/36.1 PR4116 + PR4501 PR4114
11 12

44 43 31 33 44 43 11 12 31 33
C

-A61:14
243

242
241

242

244

245
E1+ E1+ E1+
11.6 / E1+ E1+ / 26.0

0VDC 0VDC 0VDC 0VDC 0VDC


16.2 / 0VDC 0VDC / 26.0

-IE -IE -IE

E -X8 1 2 -X8 53 54 -X8 3 4

-W27
-W11

F
=OFB+ =EGCS+
+ -
-K61
EGCS
27 28
PRESSURE
TRANSMITTER

Pressure In Uptake Pressure In Uptake


G
Safety Safety

23 Page: 24
Master Versions: Control - Analog Input - Uptake = SI
DKAAHOD Alfa Laval Aalborg Project Drawing No.:
Revision 2 See Title Page JLE 19-Feb-2019 Pressure Safety and Control + L25
25/07/2019 Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0 Gasvaerksvej 21
105X03: 092144 Next Page: 25
9000 Aalborg DK
Revision No. Rev. Made by/Date Approved by/Date Project Created By Creation Date EEC Version: Pages of: 42
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.

Revision 2
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

F
E
B

C
A

G
D

24
DKAAHOD
25/07/2019
0

=OFB+

Revision No. Rev. Made by/Date Approved by/Date


-W13

LCP
-X8
-A61:3
1

3
-A61
/17.7

1I2+

1
5

Project
-A61:7
Burner Load

1I2-
7

2
6

See Title Page


Burner Load
-IE

JLE

Created By
2

19-Feb-2019

Creation Date EEC Version:


3

Master Versions:
4

Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0


5

Gasvaerksvej 21
9000 Aalborg DK
Alfa Laval Aalborg
6
7

Control - Analog Input - Burner Load

105X03: 092144
8

Project Drawing No.:


= SI
+ L25

Pages of:
Next Page:
9

42
26
Page: 25
0 1 2 3 4 5 6 7 8 9

Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), E1+ E1+
24.9 / E1+ E1+ / 27.0

0VDC 0VDC Panel Temperature


24.9 / 0VDC 0VDC / 27.0
A

/17.8

-A61
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.

1I3+ 1I3-
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.

4 8
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

B
-U2
Temperatur Converter

-A61:4

-A61:8
Input Output Supply
1 2 3 4 5 6 7 8

261

261

-A61:4
261

-A61:8
C

-A61:4

-A61:8

Dipswitch Settings

Sensor Dip S1 1 2 3 Temp. Range Dip S2 1 2 3 4 5 6 7 8 9 10


D
TC J (int.cjc) Start Temp End Temp
TC K (int.cjc) 0 Degree Celcius
TC J (ext.cjc) 65 Degree Celcius
TC K (ext.cjc)

Output Dip S1 4 5 6
0-20mA
4-20mA
0-10V
2-10V
E
0-5V
1-5V

Sensor Error Detection Dip S1 7


None
Enable

Output Error Level Dip S1 8


Downscale
Upscale
F
Noise Sup. Dip S1 9 Resp.T. Dip S1 10
50 HZ < 30 ms
60 HZ 300 ms
= ON

Temperature Converter
Panel Temperature
G
NB. Installation In The Upper
Part Of The Power Panel
Minimum 2cm Space To Other Components
25 Page: 26
Master Versions: Control - Analog Input - Panel = SI
DKAAHOD Alfa Laval Aalborg Project Drawing No.:
Revision 2 See Title Page JLE 19-Feb-2019 Temperature + L25
25/07/2019 Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0 Gasvaerksvej 21
105X03: 092144 Next Page: 27
9000 Aalborg DK
Revision No. Rev. Made by/Date Approved by/Date Project Created By Creation Date EEC Version: Pages of: 42
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.

Revision 2
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

F
E
B

C
A

G
D

26
26.5 /
26.5 /

DKAAHOD
E1+

0VDC

25/07/2019
0

Revision No. Rev. Made by/Date Approved by/Date


-X8
-A62:1
1

Q0+
1
-A62
/18.2

Project
-A62:5
Speed Control

Q0-
5

See Title Page


Uptake Damper Boiler/VFD

-IE

JLE
E1+

Created By
273
0VDC
2

-X8
7a

19-Feb-2019
8a
-IE

Creation Date EEC Version:


3

-U3

E1+
+31
33-

Master Versions:
4

Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0


=EGCS+
PR4114 + PR4105

-W18

EGCS
-X8

271 -A62:2
5

12
43

(B2)
2
-A62
Q1+
/18.3

1
9

272 -A62:6
11
42
Q1-

For EGCS)
6

2
10

Burner Load
Burner Load to EGCS

Gasvaerksvej 21
9000 Aalborg DK
Alfa Laval Aalborg
-IE

(4-20 mA Isolated Signal


6

0VDC

Control - Analog Output -


7

Uptakedamper/VFD and Burner Load


105X03: 092144
8

Project Drawing No.:


= SI
+ L25

Pages of:
Next Page:
9

0VDC / 28.0

42
28
Page: 27
0 1 2 3 4 5 6 7 8 9

Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),

OK to start (E1) EMG. Operation EGCS (I1) Stop Burner (E2)


A

/19.1 /19.2 /19.3

-A63 -A63 -A63


or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.

DI0 DI1 DI4


This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.

1 2 5

-A63:2
-A63:1

-A63:5
22 24
-K5
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

12 14 /29.8 21 12 14
Damper (K65) Open
B -K1 (E6) -K2
/28.2 11 /28.8 11

282
+PF 13
-S2
EMG. Operation 14
Scrubber
0-1

0VDC 0VDC 0VDC 0VDC


C 27.9 / 0VDC 0VDC / 29.0

281 281 283

283
D
281

283
A1 A1
-K1 -K2
230VAC A2 230VAC A2
2L 2L 2L
10.8 / 2L 2L / 29.0

2N 2N
10.8 / 2N 2N / 29.0

E -X8 11 12 -X8 13 14

-W19

F
=EGCS+
EGCS 3 4

14 11 /28.1 14 11 /28.7
E1 12 12
24 24
22 21 22 21
34 34
32 31 32 31
44 44
42 41 42 41

G
OK to start EMG. Operation Stop Burner
(E1) EGCS (I1) (E2)

27 Page: 28
Master Versions: Control - Digital Input - EGCS = SI
DKAAHOD Alfa Laval Aalborg Project Drawing No.:
Revision 2 See Title Page JLE 19-Feb-2019 + L25
25/07/2019 Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0 Gasvaerksvej 21
105X03: 092144 Next Page: 29
9000 Aalborg DK
Revision No. Rev. Made by/Date Approved by/Date Project Created By Creation Date EEC Version: Pages of: 42
0 1 2 3 4 5 6 7 8 9

Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),

Damper (K66) Closed (E3) Damper (K66) Open (E4) Damper (K65) Open (E6)
A

/19.2 /19.3 /19.4

-A63 -A63 -A63


or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.

DI2 DI3 DI5


This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.

3 4 6

-A63:3

-A63:4

-A63:6
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

12 14 12 14 12 14
B -K3 -K4 -K5
/29.2 11 /29.4 11 /29.8 11

0VDC 0VDC 0VDC 0VDC


C 28.9 / 0VDC 0VDC / 30.0

291 291 292 294

292

294
D
291

292

294
A1 A1 A1
-K3 -K4 -K5
230VAC A2 230VAC A2 230VAC A2
2L 2L 2L 2L
28.9 / 2L 2L / 30.0

2N 2N 2N 2N
28.9 / 2N 2N / 30.0

E -X8 15 16 -X8 17 18 -X8 19 20

-W22 -W23

F
=EGCS+ =EGCS+
EGCS 7 8 EGCS 11 12

14 11 /29.1 14 11 /29.3 14 11 /29.7


12 E4 12 E6 12
24 24 24 21 /28.5
22 21 22 21 22
34 34 34 31 /36.2
32 31 32 31 32
44 44 44
42 41 42 41 42 41

G
Damper (K66) Closed Damper (K66) Open Damper (K65) Open
(E3) (E4) (E6)

28 Page: 29
Master Versions: Control - Digital Input - EGCS = SI
DKAAHOD Alfa Laval Aalborg Project Drawing No.:
Revision 2 See Title Page JLE 19-Feb-2019 + L25
25/07/2019 Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0 Gasvaerksvej 21
105X03: 092144 Next Page: 30
9000 Aalborg DK
Revision No. Rev. Made by/Date Approved by/Date Project Created By Creation Date EEC Version: Pages of: 42
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.

Revision 2
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

F
E
B

C
A

G
D

29
29.9 /

29.9 /
29.9 /

DKAAHOD
2N
2L
0VDC

25/07/2019
0

2L
0VDC

-X8

Revision No. Rev. Made by/Date Approved by/Date


21
/30.2
-K6

301 -A63:7
6
1

DI6
7
-A63
/19.5

11
12 14

22
2N

Project
See Title Page
VFD Fault/Overload

301

JLE

Created By
42
44
32
34
22
24
12
14
230VAC
-K6

2L
301
2

A2
A1

41
31
21
0VDC

11 /30.1

19-Feb-2019
-X8
23
/30.4
-K7

Creation Date EEC Version:


302 -A63:8
7
3

DI7
8
-A63
/19.5

11
12 14

24
2N
VFD Running

Master Versions:
302

42
44
32
34
22
24
12
14
230VAC
-K7

302
4

A2
A1

41
31
21
11 /30.3

Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0


5

Gasvaerksvej 21
9000 Aalborg DK
Alfa Laval Aalborg
2L
6

0VDC

2N

Control - Digital Input - VFD


7

105X03: 092144
8

Project Drawing No.:


= SI
+ L25

Pages of:
Next Page:
9

2L / 31.0

2N / 31.0
0VDC / 31.0

42
31
Page: 30
0 1 2 3 4 5 6 7 8 9

Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
Oil Fired Boiler Start/Stop Burner Running Oil Valves
(B1) Open (B3) Burner In Shutdown (B4)
A

/20.1 /20.2 /20.2

-A64 -A64 -A64


or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.

DI0 DI1 DI2


This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.

1 2 3

-A64:1

-A64:2

-A64:3
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

12 14 12 14 12 14
B -K8 -K9 -K10
/31.2 11 /31.4 11 /31.6 11

0VDC 0VDC 0VDC 0VDC


C 30.9 / 0VDC 0VDC / 32.0

311 311 312 313

312

313
D
311

312

313
A1 A1 A1
-K8 -K9 -K10
230VAC A2 230VAC A2 230VAC A2
2L 2L 2L 2L
30.9 / 2L 2L / 32.0

2N 2N 2N 2N
30.9 / 2N 2N / 32.0

E -X8 25 26 -X8 27 28 -X8 29 30

-W4 -W14 -W15

F
=OFB+ =OFB+ =OFB+
LCP 3 4 LCP 5 6 LCP 7 8

14 11 /31.1 14 11 /31.3 14 11 /31.5


B1 12 B3 12 B4 12
24 24 24
22 21 22 21 22 21
34 34 34
32 31 32 31 32 31
44 44 44
42 41 42 41 42 41

G
Oil Fired Boiler Burner Running Burner In Shutdown (B4)
Start/Stop (B1) Oil Valves Open (B3)

30 Page: 31
Master Versions: EGC System 1 - Interface DI = SI
DKAAHOD Alfa Laval Aalborg Project Drawing No.:
Revision 2 See Title Page JLE 19-Feb-2019 + L25
25/07/2019 Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0 Gasvaerksvej 21
105X03: 092144 Next Page: 32
9000 Aalborg DK
Revision No. Rev. Made by/Date Approved by/Date Project Created By Creation Date EEC Version: Pages of: 42
0 1 2 3 4 5 6 7 8 9

Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
Fuel Supply From Tank 1 Fuel Supply From Tank 2 Fuel Supply From Tank 3 Fuel Supply From Tank 4
(B5) (B6) (B7) (B8)
A

/20.3 /20.3 /20.4 /20.5

-A64 -A64 -A64 -A64


or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.

DI3 DI4 DI5 DI6


This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.

4 5 6 7

-A64:4

-A64:5

-A64:6

-A64:7
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

12 14 12 14 12 14 12 14
B -K11 -K12 -K13 -K14
/32.2 11 /32.4 11 /32.6 11 /32.8 11

0VDC
0VDC 0VDC 0VDC 0VDC
C 31.9 / 0VDC

321 321 322 323 324

322

323

324
D
321

322

323

324
A1 A1 A1 A1
-K11 -K12 -K13 -K14
230VAC A2 230VAC A2 230VAC A2 230VAC A2
2L 2L 2L 2L
31.9 / 2L 2L /

2N
2L
2N 2N 2N 2N
31.9 / 2N 2N /

E -X8 31 32 -X8 33 34 -X8 35 36 -X8 37 38

-W5 -W6

F
=OFB+ =OFB+
PP 9 10 PP 11 12

14 11 /32.1 14 11 /32.3 14 11 /32.5 14 11 /32.7


B5 12 B6 12 12 12
24 24 24 24
22 21 22 21 22 21 22 21
34 34 34 34
32 31 32 31 32 31 32 31
44 44 44 44
42 41 42 41 42 41 42 41

G
Fuel Supply Fuel Supply Fuel Supply Fuel Supply
From Tank 1 (B5) From Tank 2 (B6) From Tank 3 (B7) From Tank 4 (B8)

31 Page: 32
Master Versions: EGC System 1 - Interface DI = SI
DKAAHOD Alfa Laval Aalborg Project Drawing No.:
Revision 2 See Title Page JLE 19-Feb-2019 + L25
25/07/2019 Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0 Gasvaerksvej 21
105X03: 092144 Next Page: 33
9000 Aalborg DK
Revision No. Rev. Made by/Date Approved by/Date Project Created By Creation Date EEC Version: Pages of: 42
0 1 2 3 4 5 6 7 8 9

Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),

Start/Stop Boiler (B1) Boiler In Shutdown (B4) Start VFD Burner Running Oilvalves Open (B3) Fuel Supply From Tank 1 (B5) Fuel Supply From Tank 2 (B6) Fuel Supply From Tank 3 (B7) Fuel Supply From Tank 4 (B8)

/21.2 /21.3 /21.4 /21.6 /22.2 /22.3 /22.4 /22.6


-A65 -A65 -A65 -A65 -A66 -A66 -A66 -A66
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.

RQ0+ RQ0- RQ1+ RQ1- RQ2+ RQ2- RQ3+ RQ3- RQ0+ RQ0- RQ1+ RQ1- RQ2+ RQ2- RQ3+ RQ3-
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.

1 5 2 6 3 7 4 8 1 5 2 6 3 7 4 8
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

1L 1L 1L 1L 1L 1L 1L 1L 1L
10.6 / 1L 1L / 34.0
B

-A65:1

-A65:2

-A65:4

-A65:4

-A66:1

-A66:2

-A66:3

-A66:4
C

A1 A1 A1 A1 A1 A1 A1 A1
-K15 -K16 -K17 -K18 -K19 -K20 -K21 -K22
230VAC A2 230VAC A2 230VAC A2 230VAC A2 230VAC A2 230VAC A2 230VAC A2 230VAC A2

1N 1N 1N 1N 1N 1N 1N 1N 1N
10.6 / 1N 1N / 34.0

14 11 /35.1 14 11 /35.2 14 11 /36.7 14 11 /35.3 14 11 /35.4 14 11 /35.5 14 11 /35.6 14 11 /35.7


12 12 12 12 12 12 12 12
24 24 24 24 24 24 24 24
22 21 22 21 22 21 22 21 22 21 22 21 22 21 22 21
34 34 34 34 34 34 34 34
32 31 32 31 32 31 32 31 32 31 32 31 32 31 32 31
44 44 44 44 44 44 44 44
42 41 42 41 42 41 42 41 42 41 42 41 42 41 42 41

G
Start/Stop Boiler Boiler In Shutdown Start VFD Burner Running Fuel Supply Fuel Supply Fuel Supply Fuel Supply
(B1) (B4) Oilvalves Open From Tank 1 From Tank 2 From Tank 3 From Tank 4
(B3) (B5) (B6) (B7) (B8)
32 Page: 33
Master Versions: EGC System 1 - Interface DQ = SI
DKAAHOD Alfa Laval Aalborg Project Drawing No.:
Revision 2 See Title Page JLE 19-Feb-2019 + L25
25/07/2019 Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0 Gasvaerksvej 21
105X03: 092144 Next Page: 34
9000 Aalborg DK
Revision No. Rev. Made by/Date Approved by/Date Project Created By Creation Date EEC Version: Pages of: 42
0 1 2 3 4 5 6 7 8 9

Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),

Stop Burner Shutdown Burner Warning Alarm

/23.2 /23.3 /23.4 /23.6


-A67 -A67 -A67 -A67
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.

RQ0+ RQ0- RQ1+ RQ1- RQ2+ RQ2- RQ3+ RQ3-


This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.

1 5 2 6 3 7 4 8

1L
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

1L 1L 1L 1L
33.9 / 1L 1L /
B

-A67:1

-A67:2

-A67:3

-A67:4
C

A1 A1 A1 A1
-K23 -K24 -K25 -K26
230VAC A2 230VAC A2 230VAC A2 230VAC A2

1N
1N 1N 1N 1N
33.9 / 1N 1N /

14 11 /36.2 14 11 /36.3 14 11 /37.1 14 11 /37.2


12 12 12 12
24 24 24 24
22 21 22 21 22 21 22 21
34 34 34 34
32 31 32 31 32 31 32 31
44 44 44 44
42 41 42 41 42 41 42 41

G
Stop Burner Shutdown Burner Warning Alarm

33 Page: 34
Master Versions: EGC System 1 - Interface DQ = SI
DKAAHOD Alfa Laval Aalborg Project Drawing No.:
Revision 2 See Title Page JLE 19-Feb-2019 + L25
25/07/2019 Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0 Gasvaerksvej 21
105X03: 092144 Next Page: 35
9000 Aalborg DK
Revision No. Rev. Made by/Date Approved by/Date Project Created By Creation Date EEC Version: Pages of: 42
0 1 2 3 4 5 6 7 8 9

Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),

A
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.

351 353 355 357 359 3511 3513

3511

3513
351

353

355

357

359
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

12 14 12 14 12 14 12 14 12 14 12 14 12 14
B -K15 -K16 -K18 -K19 -K20 -K21 -K22
/33.1 11 /33.2 11 /33.4 11 /33.5 11 /33.6 11 /33.7 11 /33.8 11

3511

3513
351

353

355

357

359
3510

3512

3514
352

354

356

358
D

E -X8 39 40 -X8 41 42 -X8 43 44 -X8 45 46 -X8 47 48 -X8 49 50 -X8 51 52 -X8 53 54 -X8 55 56

-W24

=EGCS+

EGCS 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Start/Stop Boiler Burner Running Fuel Supply Fuel Supply Fuel Supply Fuel Supply
Boiler 1 In Shutdown Oilvalves Open From Tank 1 From Tank 2 From Tank 3 From Tank 4
G
(B1) (B4) (B3) (B5) (B6) (B7) (B8)

34 Page: 35
Master Versions: EGC System 1 - Potential Free to EGCS = SI
DKAAHOD Alfa Laval Aalborg Project Drawing No.:
Revision 2 See Title Page JLE 19-Feb-2019 + L25
25/07/2019 Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0 Gasvaerksvej 21
105X03: 092144 Next Page: 36
9000 Aalborg DK
Revision No. Rev. Made by/Date Approved by/Date Project Created By Creation Date EEC Version: Pages of: 42
0 1 2 3 4 5 6 7 8 9

Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),

A
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.

361 364 366 368 3610

3610
361

364

366

368
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

24 32 34 12 14 12 14 12 14
B -U1 -K5 -K23 -K24 -K17
/24.1 23 /29.8 31 /34.1 11 /34.2 11 /33.3 11
HIGH HIGH Damper (K65) Open Stop Burner Shutdown Burner Start VFD
PRESSURE IN UPTAKE (E6)
362

22
C -U1
/24.1 21

3610
361

364

366

368
LOW LOW
PRESSURE IN UPTAKE

3611
365

367

369
363

E -X8 57 58 -X8 59 60 -X8 61 62 -X8 63 64 -X8 65 66 -X8 67 68 -X8 69 70 -X8 71 72 -X8 73 74

-W16 -W9

=OFB+ =OFB+
LCP 9 10 11 12 13 14 15 16 17 18 19 20
PP 17 18 19 20 21 22

HW Shutdown Damper K(65) Open Stop Burner Shutdown Burner Start VFD
(in safety circuit for OFB) (Need this signal to (External Stop) (External Shutdown)
G
oprate Boiler in Emergency)

35 Page: 36
Master Versions: EGC System 1 - Potential Free to LCP 1 = SI
DKAAHOD Alfa Laval Aalborg Project Drawing No.:
Revision 2 See Title Page JLE 19-Feb-2019 + L25
25/07/2019 Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0 Gasvaerksvej 21
105X03: 092144 Next Page: 37
9000 Aalborg DK
Revision No. Rev. Made by/Date Approved by/Date Project Created By Creation Date EEC Version: Pages of: 42
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.

Revision 2
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

F
E
B

C
A

G
D

36
DKAAHOD
25/07/2019
0

=AMS+
-AMS
/34.3
Warning
-K25

-W25

Revision No. Rev. Made by/Date Approved by/Date


-X8
372 371

1
11
12 14

75
1

Warning
371

Project
371

See Title Page


76

JLE
Alarm
/34.4
-K26

Created By
-X8
374 373

3
11
12 14

77

Alarm
2

373

373

4
78

19-Feb-2019
-X8

Creation Date EEC Version:


5
79
3

6
80

Master Versions:
-X8

7
81
4

8
82

Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0


-X8

9
83
5

10
84

Gasvaerksvej 21
9000 Aalborg DK
Alfa Laval Aalborg
6
7

EGC System 1 - Potential Free to AMS

105X03: 092144
8

Project Drawing No.:


= SI
+ L25

Pages of:
Next &Cable
9

Page: Connection/2
42
Page: 37
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.

Revision 2
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

F
E
B

C
A

G
D
External targets Internal targets

&SCH/37
DKAAHOD
25/07/2019
0

P: 133 kW
=SI+L25-W0

Revision No. Rev. Made by/Date Approved by/Date


MAIN SWITCH BOARD U: 440 V
conductor
-Q0
1

Project
2

See Title Page


&SCH/4.1
2
1

JLE
Switch Board
4

Created By
Cable-connection diagram

4
3

3
2

19-Feb-2019

Creation Date EEC Version:


=SI+L25-W4
3

Oil Fired Boiler Start/Stop (B1)

conductor
=OFB-LCP -X8

Master Versions:
3
25
25

&SCH/25.1
4
26
26
4

Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0


=SI+L25-W5
5

Fuel Supply From Tank 1 (B5)

conductor
=OFB-PP -X8

Gasvaerksvej 21
9000 Aalborg DK
Alfa Laval Aalborg
9
31
31

&SCH/32.1
10
32
32
6

=SI+L25-W6
=SI+L25-W6

=SI+L25-W4 =SI+L25-W5
7

Fuel Supply From Tank 2 (B6)

conductor
=OFB-PP -X8
Cable-connection diagram =SI+L25-W0
11
33
33

11

&SCH/32.1
12
34
34

105X03: 092144
8

Project Drawing No.:


= SI
+ L25

Pages of:
27/08/2019

Next Page:
9

DKAAHOD
Ala_Std_Cable_ConForm_ALTC_External_Rev3

Page:
2

42
2.a
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.

Revision 2
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

F
E
B

C
A

G
D

2
External targets Internal targets

DKAAHOD
25/07/2019
0

=SI+L25-W9

Potential Free Signals To OFB

Revision No. Rev. Made by/Date Approved by/Date


conductor
-X8
1

=OFB-PP

Project
17
69
69

See Title Page


&SCH/32.1
18
70
70

JLE
19
71

Created By
Cable-connection diagram

69

17
2

20
72

21
73

19-Feb-2019
22
74

Creation Date EEC Version:


3

=SI+L25-W11

Master Versions:
Pressure In Uptake Safety

conductor
=OFB-K61 -X8
4

1
1

+
1

&SCH/24.1

Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0


-
-
2
2

PRESSURE
TRANSMITTER -IE
5

Gasvaerksvej 21
9000 Aalborg DK
Alfa Laval Aalborg
Burner Load
=SI+L25-W13
6

conductor
=EGCS-EGCS -X8
27
53
53

53

27

&SCH/24.4
28
54
54
7

=SI+L25-W11 =SI+L25-W13

-IE
Cable-connection diagram =SI+L25-W9

=OFB-LCP -X8
1
5
5

105X03: 092144
8

&SCH/25.1
2
6
6

Project Drawing No.:

-IE
= SI
+ L25

Pages of:
27/08/2019

Next Page:
9

DKAAHOD
Ala_Std_Cable_ConForm_ALTC_External_Rev3

42
Page: 2.a

2.b
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.

Revision 2
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

F
E
B

C
A

G
D

2.a
External targets Internal targets

DKAAHOD
25/07/2019
0

(B3)
=SI+L25-W14

Revision No. Rev. Made by/Date Approved by/Date


Burner Running Oil Valves Open
conductor
-X8
1

=OFB-LCP

Project
5
27

See Title Page


27

&SCH/25.1
6
28
28

JLE

Created By
Cable-connection diagram
2

19-Feb-2019
=SI+L25-W15

Burner In Shutdown (B4)

Creation Date EEC Version:


conductor
=OFB-LCP -X8
3

7
29
29

&SCH/25.1
8
30
30

Master Versions:
4

Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0


=SI+L25-W16

Potential Free Signals To OFB

conductor
=OFB-LCP -X8
5

9
57
57

&SCH/25.1
10
58
58

Gasvaerksvej 21
9000 Aalborg DK
Alfa Laval Aalborg
11
59
59

12
60
60
6

13
61
61

14
62
62

=SI+L25-W16
57

9
15
63
63

Cable-connection diagram
16
64
64
7

=SI+L25-W14 =SI+L25-W15
17
65

18
66

19
67

20
68

105X03: 092144
8

Project Drawing No.:


= SI
+ L25

Pages of:
27/08/2019

Next Page:
9

DKAAHOD
Ala_Std_Cable_ConForm_ALTC_External_Rev3

42
2.c
Page: 2.b
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.

Revision 2
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

F
E
B

C
A

G
D

2.b
External targets Internal targets

DKAAHOD
25/07/2019
0

=SI+L25-W18

Signal For EGCS) (B2)


Burner Load (4-20 mA Isolated

Revision No. Rev. Made by/Date Approved by/Date


conductor
-X8
1

=EGCS-EGCS

Project
1
9
9

See Title Page


9

&SCH/24.4
2
10
10

JLE

Created By
Cable-connection diagram
2

19-Feb-2019
OK to start (E1)
=SI+L25-W19

Creation Date EEC Version:


conductor
=EGCS-EGCS -X8
3

3
11
11

11

&SCH/24.4
4
12
12

Master Versions:
4

Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0


=SI+L25-W22

Damper (K66) Open (E4)

conductor
=EGCS-EGCS -X8
5

7
17
17

&SCH/24.4
8
18
18

Gasvaerksvej 21
9000 Aalborg DK
Alfa Laval Aalborg
6

=SI+L25-W23

Damper (K65) Open (E6)

=SI+L25-W24

conductor
=EGCS-EGCS -X8
Cable-connection diagram
7

=SI+L25-W22 =SI+L25-W23
=SI+L25-W18 =SI+L25-W19
11
19
19

11

&SCH/24.4
12
20
20

105X03: 092144
8

Project Drawing No.:


=SI+L25-W24

Potential Free Signals To EGCS

conductor
= SI

-X8
+ L25

=EGCS-EGCS
Pages of:
27/08/2019

Next Page:
9

39

13
39
39

13
DKAAHOD
Ala_Std_Cable_ConForm_ALTC_External_Rev3

&SCH/24.4

42
Page: 2.c

2.d
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.

Revision 2
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

F
E
B

C
A

G
D

2.c
External targets Internal targets

DKAAHOD
25/07/2019
0

=SI+L25-W24

Potential Free Signals To EGCS

Revision No. Rev. Made by/Date Approved by/Date


conductor
-X8
1

=EGCS-EGCS

Project
14
40
40

See Title Page


&SCH/24.4
15
41
41

JLE
16
42
42

Created By
Cable-connection diagram
2

17
43
43

18
44
44

19-Feb-2019
19
45
45

20
46
46

Creation Date EEC Version:


3

21
47
47

40

22
48
48

14
23
49
49

Master Versions:
24
50
50
4

25
51
51

26
52
52

Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0


27
53

28
54
5

29
55

30
56

Gasvaerksvej 21
9000 Aalborg DK
Alfa Laval Aalborg
6

=SI+L25-W25

Potential Free Signals To OFB

conductor
=AMS-AMS -X8
Cable-connection diagram
1
75
75
7

=SI+L25-W24 =SI+L25-W25
&SCH/37.1
2
76
76

3
77
77

4
78
78

5
75

79

105X03: 092144
8

Project Drawing No.:


6
80

7
81

8
82

= SI
+ L25

Pages of:
27/08/2019

Next Page:
83
9

DKAAHOD
Ala_Std_Cable_ConForm_ALTC_External_Rev3

42
2.e
Page: 2.d
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.

Revision 2
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.

F
E
B

C
A

G
D

2.d
External targets Internal targets

DKAAHOD
25/07/2019
0

=SI+L25-W25

Potential Free Signals To OFB

Revision No. Rev. Made by/Date Approved by/Date


conductor
-X8
1

=AMS-AMS

Project
84

10
84

10

See Title Page


&SCH/37.1

JLE

Created By
Cable-connection diagram
2

19-Feb-2019

Creation Date EEC Version:


3

Master Versions:
4

Drawing Template Vers.: ALTC Scrub. Inter. Panel Rev.0


5

Gasvaerksvej 21
9000 Aalborg DK
Alfa Laval Aalborg
6

=SI+L25-W25
Cable-connection diagram
7

105X03: 092144
8

Project Drawing No.:


= SI
+ L25

Pages of:
27/08/2019

Next Page:
9

DKAAHOD
Ala_Std_Cable_ConForm_ALTC_External_Rev3

42
Page: 2.e

You might also like