Professional Documents
Culture Documents
Industry Online Support International Language Contact Help Support Request Site Explorer Search in Online Support
Product information on the firmware update for LOGO! 8 FS:04 and FS:05 Share this Page:
Entry Associated product(s)
mySupport Cockpit
A firmware update is available for LOGO! 8 FS:04 and FS:05. The firmware update includes the following changes:
Klien Parker
Please note that upgrading the firmware for LOGO! 8 FS:04 restores LOGO! to the factory state and deletes the user program and all settings.
1. Perform the free update from V8.1 to V8.1.1 of LOGO! Soft Comfort.
2. Download the firmware update and save it on the PC.
3. Copy and back up program on the PC in LOGO! with LOGO! Soft Comfort V8.1.1.
4. Transfer the firmware update file on the MSD card to the root directory. Changes to the file, for example, file names, are not supported and LOGO!
cannot complete the update as a result.
5. Switch off the voltage supply for LOGO!.
6. Insert the MSD card with the firmware update in LOGO! and carefully insert the MSD card holder in LOGO!.
7. Switch on the voltage supply for LOGO!. Make sure that the voltage supply of the LOGO! base unit is stable during the entire firmware update
process and within the range described in the manual.
8. After completing the procedure, check the firmware update in the LOGO! the base unit.
9. Transfer the previously saved program back in LOGO! and make all necessary settings.
10. Check the program, function and settings and adapt them if necessary.
Instructions for upgrading the firmware for LOGO!8 FS:05:
1. Perform the free update from V8.1 to V8.1.1 of LOGO! Soft Comfort.
2. Download the firmware update and save it on the PC.
3. Copy and back up program on the PC.
4. Transfer the firmware update file on the MSD card to the root directory. Changes to the file, for example, file names, are not supported and LOGO!
cannot complete the update as a result.
5. Switch off the voltage supply for LOGO!.
6. Insert the MSD card with the firmware update in LOGO! and carefully insert the MSD card holder in LOGO!.
7. Switch on the voltage supply for LOGO!. The update is started automatically. Make sure that the voltage supply of the LOGO! base unit is stable
during the entire firmware update process and within the range described in the manual.
8. After completing the procedure, check the firmware update in the LOGO! the base unit.
9. If necessary, transfer the previously saved program back in LOGO!.
10. Check the program, function and settings and adapt them if necessary.
The firmware update can only be performed with LOGO! 8 FS:04 or FS:05.
The voltage supply for the LOGO! may not be interrupted during the entire time of the update and must be within the permissible range for the
LOGO! in use.
The firmware can only be upgraded using SD cards.
After the firmware update, LOGO! 8 FS:04 is reset to the factory state. The user program in the LOGO! base unit is deleted.
For LOGO! 8 FS:05, the program located in LOGO! is not deleted by upgrading the firmware.
Check the firmware update program, function and settings.
http://w3.siemens.com/mcms/programmable-logic-controller/en/logic-module-logo/demo-software/Pages/Default.aspx
Link for downloading the required files for the firmware update of LOGO! 8 FS:04 and FS:05:
Security information
In order to protect technical infrastructures, systems, machines and networks against cyber threats, it is necessary to implement – and
continuously maintain – a holistic, state-of-the-art IT security concept. Siemens’ products and solutions constitute one element of such a
concept. For more information about cyber security, please visit
https://www.siemens.com/cybersecurity#Ouraspiration.
Rate entry
You want to discuss in our forum and exchange experiences with other users
Go to the Forum
You have a technical question / problem: Ask the Technical Support
Create support request
Note: Depending on the effort involved, support may be subject to a charge. In this case, please have a Siemens Industry Service
Card ready.
You want to create CAx data for one or more products
Go to the CAx download manager
You would like to send us feedback on this Entry
Provide feedback
Note: The feedback always relates to the current entry. Your message will be forwarded to our technical editors working in the Online
Support. In a few days, you will receive a response if your feedback requires one.