Professional Documents
Culture Documents
Class 8 Electricity 2
Class 8 Electricity 2
1. Fig. 9.1 shows the circuit that operates the two headlights and the two
sidelights of a car.
Two of the lamps have resistances of 4.0 Ω when lit. The other two lamps have
resistances of 12 Ω when lit. Switch A can be connected to positions 1, 2 or 3.
(ii) position 2.
.................................................................................................................
(iii) position 3.
.................................................................................................................
2. Electric current in a/an _____________________ circuit travels in ONE path.
Electric current in a/an ____________________ circuit travels in more than one
path. The flow of electric charge through something is a/an
_________________________.
__________________________ device is used to measure current.
__________________________ device is used to measure voltage.
3. What is resistance?
Resistance
is ........................................................................................................................
....
............................................................................................................................
When the circuit is switched on, the ammeter reads 0.50 A. (i) Calculate the value of
the unknown resistor.
resistance = ……………………..
5. Fig. 8.1 shows a low-voltage lighting circuit.
(a) On Fig. 8.1, indicate with a dot and the letter S, a point in the circuit where a
switch could be placed that would turn off lamps Y and Z at the same time but
would leave lamp X still lit.
(c) The current in lamp Z is 3.0 A. Calculate the resistance of this lamp
(d) The lamp Y is removed. Why do lamps X and Z still work normally?
............................................................................................................................
............................................................................................................................
6. This question refers to quantities and data shown on the circuit diagram of Fig.
9.1.