Professional Documents
Culture Documents
General Specifications
Antenna Type Sector- and beamforming
Grounding Type RF connector inner conductor and body grounded to reflector and mounting
bracket
Page 1 of 5
©2024 CommScope, Inc. All rights reserved. CommScope and the CommScope logo are registered trademarks of CommScope and/or its
affiliates in the U.S. and other countries. For additional trademark information see https://www.commscope.com/trademarks. All product names,
trademarks and registered trademarks are property of their respective owners. Revised: November 9, 2023
S4-90M-R1-V5
Dimensions
Width 307 mm | 12.087 in
Array Layout
Port Configuration
Page 2 of 5
©2024 CommScope, Inc. All rights reserved. CommScope and the CommScope logo are registered trademarks of CommScope and/or its
affiliates in the U.S. and other countries. For additional trademark information see https://www.commscope.com/trademarks. All product names,
trademarks and registered trademarks are property of their respective owners. Revised: November 9, 2023
S4-90M-R1-V5
Electrical Specifications
Impedance 50 ohm
Polarization ±45°
Electrical Specifications
P1 P1 P1 P1
Frequency Band, MHz 3300–3400 3400–3700 3700–4000 4000–4200
RF Port 1-8 1-8 1-8 1-8
Gain, dBi 16 16.7 17.6 17
Beamwidth, Horizontal, degrees 92 87 81 75
Beamwidth, Vertical, degrees 6.5 6.1 5.8 5.5
Beam Tilt, degrees 0–10 0–10 0–10 0–10
Front-to-Back Ratio at 180°, dB 31 31 31 30
Coupling level, Amp, Antenna port to 26 26 26 26
Cal port, dB
Coupling level, max Amp ∆, Antenna ±2 ±2 ±2 ±2
port to Cal port, dB
Coupler, max Amp ∆, Antenna port 0.6 0.6 0.6 0.6
to Cal port, dB
Coupler, max Phase ∆, Antenna port 5 5 5 5
to Cal port, degrees
Isolation, Cross Polarization, dB 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
©2024 CommScope, Inc. All rights reserved. CommScope and the CommScope logo are registered trademarks of CommScope and/or its
affiliates in the U.S. and other countries. For additional trademark information see https://www.commscope.com/trademarks. All product names,
trademarks and registered trademarks are property of their respective owners. Revised: November 9, 2023
S4-90M-R1-V5
CPR at Boresight, dB 17 17 16 16
CPR at Sector, dB 12 11 9 9
Page 4 of 5
©2024 CommScope, Inc. All rights reserved. CommScope and the CommScope logo are registered trademarks of CommScope and/or its
affiliates in the U.S. and other countries. For additional trademark information see https://www.commscope.com/trademarks. All product names,
trademarks and registered trademarks are property of their respective owners. Revised: November 9, 2023
S4-90M-R1-V5
Electrical Specifications, Soft Split
Frequency Band, MHz 3300–3400 3400–3700 3700–4000 4000–4200
Gain, dBi 20 20.4 20.8 20.3
Mechanical Specifications
Effective Projective Area (EPA), frontal 0.27 m² | 2.906 ft²
Wind Loading @ Velocity, frontal 284.0 N @ 150 km/h (63.8 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 56.0 N @ 150 km/h (12.6 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 286.0 N @ 150 km/h (64.3 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 343.0 N @ 150 km/h (77.1 lbf @ 150 km/h)
Regulatory Compliance/Certifications
Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
Included Products
BSAMNT-3 – Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members.
Kit contains one scissor top bracket set and one bottom bracket set.
* Footnotes
Performance Note Severe environmental conditions may degrade optimum performance
Page 5 of 5
©2024 CommScope, Inc. All rights reserved. CommScope and the CommScope logo are registered trademarks of CommScope and/or its
affiliates in the U.S. and other countries. For additional trademark information see https://www.commscope.com/trademarks. All product names,
trademarks and registered trademarks are property of their respective owners. Revised: November 9, 2023