A: ABS Sleeping Surface B:Manual Crank System C: Side Rails by ABS plastic D: Oxygen Tank Holder by SS E: I.V.Pole with two hooks F: 6" Castor with Center Controller Lock G: Gas Spring system STANDARD ACCESSORIES: Technical features : Headrest area can be lowered and raised up to a 45° angle . Total length : 190cm Total width : 64cm Head section length: 75cm Leg section length : 115cm Steel structure Complete with foldable side-rails, adjustable I.V. pole, removable. Totally foot-control brake system.
a, PU Mattress Thickness:5cm b, Oxygen Tank Holder by Stainless Steel
c, Back-rest by Gas Spring & Handle by Stainless Steel d, Manual Crank System & Handle by Steel Chromed e, 6” Castor by Center Controller Lock f, Direction castor under the chassis and control the stretcher direction SPECIFICATION: Integrated stamping frame and base are steel made with epoxy. polyester powder coated & baked finish, resistant to chipping and scratching. The quality attains national standard. It is equipped with castors which is quiet and noiseless and able to support over 250kgs.
Castor Diameter: 15cm
Low Position : 59cm Maximum height :84cm Total length : 190×64cm Head section : 75×60cm Leg section :115×60cm Backrest maximum adjustable angle :45° Function description : This manual stretcher designed for a rapid and safe mobilization of critical patients , for their transportation from the emergency room to the ward and from the ward to the various diagnostic rooms . 1、 Equipped with central-brake system , stable and reliable , with the direction castor system,easy to control the direction . 2、 The height adjustable from 59cm---84cm 3、 Backrest maximum angle : 45°, any position within the angle range can be locked 4、 Equipped with two folding side-rails and an adjustable I.V. pole , an oxygen-tank folder