Professional Documents
Culture Documents
Specifications
Fuel System
Engine Model AS6500
Injection pump Longkou in-line “P” type
In-line,4 strokes,
Governor RSV
4 valves,
Feed pump Mechanical type
Engine Type water-cooled ,
Injection nozzle Multi hole type
Turbo charged
Opening pressure 250 kg/cm2
with aftercooler
Fuel filter Full flow, car tridge type
Combustion type Direct injection
Used fuel Diesel fuel oil
Cylinder Type Dry liner
Number of cylinders 6
Firing order 1-5-3-6-2-4 Oil pan capacity High level 17.5 liters
Fly wheel housing SAE NO.11.5 Lub. Oil Refer to Operation Manual
www.aggpower.co.uk
Cooling System Engineering Data
Cooling method Fresh water forced circulation Heat rejection to coolant 15.1kcal/sec(1500r/min)
Water capacity 9.6liters 16.9kcal/sec(1800r/min)
(engine only) 18.1kcal/sec(1800r/min)
Lid Min. pressure 70kPa Heat rejection to intercooler 10.6kcal/sec(1500r/min)
Water pump Centrifugal type driven by belt 11.3kcal/sec(1800r/min)
Water pump Capacity 129L/min (1500r/min) Air flow 11.9m3/min (1500r/min)
Operation conditions
Features 155L/min (1800r/min) Features 14.7m3/min(1800r/min)
The maximum temp. Exhaust gas flow 28.1m3/min(1500r/min)
of coolant in prime/ 104/100 34.8m3/min(1800r/min)
Standby power Exhaust gas temp 600 °C
Wax–pellet type Max. permissible restrictions 3 kPa initial
Thermostat Opening temp. 82°C Intake system 6 kPa final (need
Full open temp. 95°C Options
charge filter element)
Cooling fan Blower type, plastic Exhaust system 6 kPa max
660 mm diameter, 10 blades Max. permissible altitude 2000 m
Power consumption 6kw Intercooler permissible restrictions 8 kPa
Cooling air flow 4.5 m³/s
Dimension
Electrical System
info@aggpower.co.uk | www.aggpower.co.uk
Follow us @facebook.com/aggpowergroup
Follow us @linkedin.com/company/agg-power
Follow us @ AGGPOWER