Professional Documents
Culture Documents
Cartridge Filters
Economically Efficient Pleated Filter Cartridge
This cost effective, disposable filter element can be used for a wide range
of applications. The filter is constructed of pleated polypropylene filter
media with high surface area that allows for greater system flow rate
Product Specifications
Features and Benefits
Media: Polypropylene
Core, end caps, cage: Polypropylene • Micron rating from 0.2 to 50 μm—Broad application range
Gaskets/O-rings: Many options • Fixed pore structures—Resists unloading of captured contaminant
available
• Polypropylene construction—Inert to many process fluids
Micron ratings: 0.2, 0.25, 0.45, 0.5, 1, 2,
5, 10, 25, 50 μm • Various gasket and o-ring materials—Compatible with a variety of
fluids
Dimensions • Economically efficient filtration
Nominal lengths: 5.0”, 9.75”, 10”, 20”,
• Manufactured in continuous lengths up to 40 inches
30”, 40”
Outside diameter: 2.7” (6.86 cm)
Inside diameter: 1.0” (2.54 cm)
Certifications
• USP Class VI: Meets USP Class VI Biological Tests for Plastics
Operating Parameters
• FDA Listed Materials: All materials comply with FDA Title 21 of the
Max. operating temperature: 176 °F
Code of Federal Regulations Sections 174.5 and 177.1520, as applicable
(80°C)
for food and beverage contact
Max differential pressure:
• European Directive for Direct Food Contact: European Regulation No.
75 psid @ 70°F (5.2 bar @ 21°C)
1935/2004 and European Regulation 10/2011: Tested for migration
30 psid @ 176°F (2.0 bar @ 80°C) behaviour and is suitable for contact with all kinds of foodstuffs with
Recommended change-out pressure: 35 minimal rinse-up
psid (2.4 bar)
Maximum reverse pressure: 40 psid at
70°F (2.8 bar at 21°C)
0.5 25 -20 -P7 (226/fin single open end) T (Teflon encap. Viton, o-rings only)
For liquids other than water, multiply pressure drop by the fluid 25 μm 32 25
viscosity in centipoise 50 μm 70 50