Professional Documents
Culture Documents
Define Pitch circle, circular pitch, diametral pitch, velocity ratio and module in spur gear
Explain the conditions for a link to be in equilibrium when i) Two forces act ii) Three forces act iii) Two forces and torque
act.
Build the spur gear meshing externally and are having a velocity ratio of 3. The teeth are of involute form with module 6mm.
Standard addendum of one module. The pressure angle of 18 degree. The pinion rotates at 90 rpm. Solve and determine 1)
Number of teeth on each wheel so that interference is just avoided.2) Length of path of contact 3) Length of arc of contact 4)
Maximum velocity of sliding between the teeth
For the four-bar mechanism with static equilibrium shown, the torque T 3=3000Nm and T4=2000Nm
respectively. Link lengths AD=800mm, AB=300mm, BC=700mm and CD=400mm. Solve and determine input
torque T2 on the crank
For the slider crank mechanism shown below Determine the input torque T to be applied.