Professional Documents
Culture Documents
SmartCRCL DetailedQASoftware (010-031-00) OPM
SmartCRCL DetailedQASoftware (010-031-00) OPM
.+4:/
CR-IR346CL
DETAILED QA SOFTWARE
OPERATION MANUAL
1st Edition
.A>HK=HO
MADE IN JAPAN
FUJI PHOTO FILM CO., LTD.
TOKYO 106-8620
CONTENTS
INTRODUCTION _____________________________________________ !
INTRODUCTION
This operation manual explains functions and operations of the Detailed QA Software to be
performed at the FCR XG1 CR-IR346CL. Refer to the FCR XG1 CR-IR346CL OPERATION
MANUAL (No.:010-024-xx) and the FCR XG1 CR-IR346CL OPERATION MANUAL
SEPARATE VOLUME, THE USER UTILITY OPERATIONS (No.:010-028-xx) concerning
other functions and operations.
OPERATIONS
The following tables explains the characteristics of the image processing parameters.
GC Central density of inclination of the 0.30 to 2.64 (the second decimal place)
tonal curve.
Changes GA centering on the density
determined here.
GS Amount of parallel translation of the 1.44 to 1.44 (the second decimal place)
tonal curve.
Changes display density of the entire
image.
DRE Level of enhancement of dynamic 0.0 to 1.0 (the first decimal place)
range control filter processing.
Changes the strength of processings
according to the value.
ORD Processing direction of tomographic 0: The orbit is at right angle to the green
artifacts suppression. line of the cassette.
Sets according to the reading direction 1: The orbit is parallel to the green line of
and the orbital direction of tomography. the cassette.