Professional Documents
Culture Documents
1. In no event will Canon be liable for direct or indirect consequential damage arising out of the
use of this product. Canon will not be liable for loss of image data due to any reason.
2. Please contact your Canon representative or distributor before installing this product.
3. Canon reserves the right to change the specifications, configuration and appearance of the
product without prior notice.
1. Overview .........................................................................................................................................................1
The Canon CXDI image processing software LANMIX MLT (M) (called “LANMIX MLT (M)” below) is
used to add greater functionality to the image processing functions of the Canon CXDI series X-ray digital
cameras (called “CXDI” below).
Installing LANMIX MLT (M) on the control PC adds the following image processing function.
Laplacian Edge Enhancement Processing
The radiography image is made sharper based on the settings of two parameters.
These parameters are dynamic range adjustment and degree of enhancement.
In addition, at the time of installation, the serviceman can make settings so that the tabs for setting Laplacian
Edge Enhancement Processing are not displayed, and the parameters are fixed at the recommended values or
setting values.
This instruction manual describes the operating procedures for the above-mentioned image processing
function.
For other operating procedures, refer to the CXDI Series Operation Manual.
Note: LANMIX MLT (M) Version 1.0 supports CXDI System Software Version 5.1.
Other CXDI versions are not supported.
–1–
2. Laplacian Edge Enhancement Processing
Laplacian Edge Enhancement Processing makes the radiography image sharper by enhancing the edges
(contour) of radiography images.
You can check the effects of parameter changes on the QA mode screen.
–2–
2. Laplacian Edge Enhancement Processing
(4) To save the modified parameters, touch the “SAVE PARAM” button, and to return the modified
parameters to their original values, touch the “RESET” button. To exit the screen, touch the “OK”
button.
* “SAVE PARAM” is displayed when is pressed.
–3–
CANON INC.
20-2 Kiyohara-Kogyodanchi, Utsunomiyashi, Tochigiken, Japan
Telephone: (81)-28-667-5711