Professional Documents
Culture Documents
Pioneer QX 747 Brochure
Pioneer QX 747 Brochure
,r - ;" ,
, {,
'; !i {r* ' br
sl
tBr-; \}}
-"&r "drl ''&f -'&l: **&ou^*
VBff TF€ffi EAS:' I REE]LE
rlx-747
sources, and has all the important four-channel circuitry
built-in. The regular matrix position can be used to reproduce
the majority of four-channel discs now available, and is
equally effective in achieving excellent four-channel sound
5- effects from your conventional two-channel discs or tapes.
The SQ matrix posi-
tion is used for ex-
clusive playback of
all SQ encoded pro-
gram sources.
]NPUT TEBMINAL:AUX
OUTPUT TERM NAL: SPEAKER
DUMMY LOAD:80
OPERATION:4 CH DRTVEN
(lmV)
ANT. INPUT LEVEL lN dB {odB=1 rV)
()PtoNEEFl'
1s,000pF x 2 ELECTROLYTIC CAPACITORS RELAY SWITCH FOR PROTECTION CIRCUIT
VARIABLE CAPACITOR
HEAT SINK
(FM 4-gang, AM 2-gang)
ANTENNA TERMINALS
SENSITIVITY SELECTORS
FOR 4.CH. LEVEL INDICATOR
POWER SWITCH
Y.
F
*
SPEAKER SELECTORS
2.CH. TAPE MONITOR SWITCH
4-CH. TAPE MONITOR SWITCH
MODE SWITCH
FUNCTION SWITCH
SPECIFICATIONS lntermodulation Distortion: Less than 0.5%
SEMICONDUCTORS (continuous power output)
FETs: I Less than 0.05%
lCs: 6 (1 watt x 4 power output)
Transistors: 123 Power Bandwidth: 7Hz lo 40KHz (lHF, 4-channels driven)
Diodes: 66 Output Speaker: Front; A, (4 to 16 ohms)
FM TUNER SECTION Rear; A, B (4 to 16 ohms)
Circuitry: 1 MOS FET, 1-stage RF amplifier, Headphone: Front & Rear
4-gang variable capacitor, Damping Factor: More than 35 (1KHz, 8 ohms)
S-stage limiter Residual Hum & Noise: Less than 1mV
Usable Sensitivity (lHF): 1.9pY (8 ohms, pre & power amp.)
capture Ratio (lHF): 1dB I nput Sensitivity/l mpedance:
Selectivity (lHF): 60dB PHONO 1: 2.2mV/50 Kohms
Signal-to-Noise Ratio: 70dB PHONO Overload Level (rms/p-p): 100mV/280mV
lmage Rejection: More than 80dB (98MHz) AUX: 140mV/100 Kohms
lF Rejection: More than 100d8 (98MHz) TAPE MONITOR (2-ch., 4-ch.): 140mV/100 Kohms
Spurious Rejection: More than 100dB Output Level/lmpedance:
AM Suppression: 55dB TAPE REC (2-ch., 4-ch.): 140mV
Harmonic Distortion: Mono; less than 0.2Yo Frequency Response
Stereo; less than 0:47o PHONO (RIAA equalization): 30Hz to 1SKHzt1dB
Frequency Response: 20Hz to 1SKHz*0.2d8, -2.0d8 AUX, TAPE MON: 10Hz to 25KHz*0.5d8, -1dB
50Hz to 1OKHz*0.2d8, -0.5dB Tone Control
Stereo Separation: More than 40dB (1KHz) BASS: + 10dB (100H2)
More than 30dB (50H2 to 10KHz) TREBLE: +10d8 (10KHz)
Sub Carrier Suppression: 65dB Loudness Contour (volume control +6dB (100H2)
Antenna lnput: 300 ohms balanced and 75 ohms set at -40dB position): +3dB (1OKHz)
unbalanced Hum & Noise (lHF, short-circuited A network)
Muting: ON-OFF PHONO: More than 70dB
AM TUNER SECTION AUX, TAPE MON: More than 90dB
Circuitry: 1-stage RF amplifier,
2-gang variable capacitor CD.4 DEMODULATOR SECTION
Sensitivity: 300pV/m (lHF, lerrite antenna) lnput Sensitivity: 2.5mV (1 to SmV adjustable)
1SpV (lHF, ext. antenna) lnput lmpedance: 100 Kohms
Selectivity: 35dB Distortion: 0.07 o/o
Signal-to-Noise Ratio: 50dB Signal-to-Noise Ratio: More than 70dB (lHF, A network) V
lmage Rejection: More than 45dB Separation: Left to Right; 50dB
lF Rejection: More than 55dB (STD test signal at lKHz): Front to Rear; 30dB
Antenna: Built-in ferrite loopstick antenna Frequency Response: 2OHz lo 1SKHz
AMPLIFIER SECTION MISCELLANEOUS
Circuitry: Direct coupled complementary, OCL Built-in CD-4 Demodulator,
Continuous Power Output: Regular Matrix Decoder,
20Hz to 20KHz 20 watts x4(8 ohms) SQ Matrix Decoder
(4-channels driven): 25 watts x4(4 ohms) Power Requirements: U.S.A. and Canada model; 120V 60Hz
1 KHz (4-channels driven): 25 watts x4(8 ohms) only or 110, 120, 130,22O,24OV
30 watts x4(4 ohms) (switchable) SO-OOnz
lKHz (Each channel driven): 33 watts/ch. (8 ohms) Power Consumption: UL model; 140 watts,
45 watts/ch. (4 ohms) other model; 340 watts
Continuous Power Output (by 2-ch. power boosting circuit) AC Outlets: Switched; 1, Unswitched; 2
20Hz to 20KHz 40 watts+40 watts (8 ohms) Dimensions: Without package:
(2-channels driven): 50 watts*50 watts (4 ohms) 550(W) x 160(H) x 420(D) mm
lKHz (2-channels driven): 45 watts*4s watts (8 ohms) 21 -21 /32(w) x 6-5/1 6(H) x 1 6-17 /32(D)
55 watts*55 watts (4 ohms) inches
lKHz (Each channel driven): 50 watts/ch. (8 ohms) With package:
65 watts/ch. (4 ohms) 662(W) x271(H) x 525(D) mm
Harmonic Distortion: Less than 0.5% 26-1/16(W) x 10-21/32(Hl x
(continuous power output) 20-21/32(D) inches
Less than 0.05% Weight: Without package: 19.1k9/42\b. 2 oz.
(1 watt x 4 power output) With package: 23.6k9/52 lb.
CDTTIoNEER'
PIONEEFI ELECTFICINIC CCIFIPCIHATICIN I 4-1,1-chorne, Meguno, Meguno-ku,Tokyo 1E3,Japan.
U.S.PIONEEFI ELECTFIONICS COFIPOFIATION / 75 Oxfond Ddve, Moonachie, NewJensey O7O74,U.S.A.
PIONEEtr ELECTFIONIC IEUFIOPEI NV. / Mein-Centen, Mein 21, 2OOO Antwenp, Belgiurn.
PIONEEFI ELECTtr|ONICS A,USTFALIA PTY LTD. / 256-El City Fload, South Metbounne,Vicronia gpOS,Ausrnatra.