Professional Documents
Culture Documents
CNC Lathe Project 1st Page New
CNC Lathe Project 1st Page New
This report pertains to take vocational training which was undertaken under TOOL ROOM &
TRAINING CENTRE, PATNA, BIHAR in partial fulfilment of the requirement for the
acquaint myself with practical experience of actual work condition in which we are required to
work in future. I learnt a lot from the practical experience of the engineering & other personals
under whom I was placed for training. This helped me to develop the habit of analysis critically
I would like to acknowledge to Mr. Anirudh kumar, Mr. Ajeet kumar, Mr. D.K Singh,
during training period who give me clear details & guidelines for the machines and their
functions.
Finally, I would like to express my thanks to all of the technical & non technical persons for the
Shivani kumari
CANDIDATE’S DECLARATION
I hereby certify that the work which is being presented in the Project entitled “CNC Lathe ” by
“Shivani kumari” in partial fulfilment of requirements for the award of degree of B.Tech.
during a period from 1st Aug.2019 to 30eth Nov.2019. The matter presented in this project has
not been submitted by me or anybody else in any other University Institute for the award of B.
Tech Degree.
This is to certify that the above statement made by the candidate/s is correct to the best of my/
our knowledge.
CONTENTS
Page No.
Candidate’s Declaration i
Acknowledgement ii
Chapter 1 : INTRODUCTION 1
2.2 Uses
2.3 Parts
2.5 Working
4.3.2 M- Codes
MANUFACTURING REVOLUTION
REFERENCES 41