Professional Documents
Culture Documents
10-KAA24360AAL
Controller
October 2, 2019 / Page 1 of 4
SERVICE ENGINEERING
This document does not contain any Otis Elevator Company
technical data subject to EAR or ITAR Bloomfield, Connecticut USA
Unpublished Work—© Otis Elevator Co.; 2019
10-KAA24360AAL History
Leaflet Description
This leaflet lists the lowest replaceable units (LRUs) for the OTIS GLIDE® P controller.
Leaflet Revisions
Date Revised Subject Matter Expert Reason for Revision
September 18, 2013 Sohaib Shaikh New SPL
September 25, 2013 Sohaib Shaikh Corrected type DOB instead of DOP in NOTE 4 on p. 3
January 14, 2015 Sohaib Shaikh Added p/n KP131328DAD on p. 3
Changed p/n from KP131328DAD to ---31328 --- on p.
August 12, 2015 Sohaib Shaikh
3; Added Note 5 on p. 3; Added OMU picture on p. 3.
October 2, 2019 Sohaib Shaikh Added new p. 4
Related Drawings
Drawing No. Title Drawing No. Title
Door Controller, for OTIS
KAA24360AAL
GLIDE P
Related Documents
Document ID Title
SPL 23-AAA24460P OTIS GLIDE® P Door Operator for Mod and Open Order Right Hand Center-Opening
SID00026 Door Operator Electrical Interface Standard
AAA24350CC-FMI Field Micro Instruction, Electrical, OTIS GLIDE® P Door Operator
Page 2 October 2, 2019 This document does not contain any technical data subject to EAR or ITAR
Unpublished Work—Otis Elevator Co., 2019
Controller, OTIS GLIDE® P 10-KAA24360AAL
KAA24360AAL
LEARN RUN
DOB ACTI EDP ACTIV
REF. W/ MOVING
PART No. DESCRIPTION APPLICATION VE STATE E STATE (N
No. MASS DETE
(NOTE 2) OTE 3)
CTION
NSAA area and all
countries except
KAA24360AAL1
Germany, Austria, Yes Active High Active High
(See NOTE 1)
Denmark and
Spain
Germany, Austria,
KAA24360AAL2 Denmark, and No Active Low Active Low
NGPOK Door Con Spain
1
troller NSAA area and all
countries except
KAA24360AAL3
Germany, Austria, Yes Active Low Active Low
(See NOTE 1)
Denmark and
Spain
Germany, Austria,
KAA24360AAL4 Denmark, and No Active High Active High
Spain
---31328---
2 OMU w/ Software KAA24360AAL N/A
(See NOTE 5)
NOTES:
1. KAA24360AAL1 and KAA24360AAL3 should not be used in these four countries: Germany, Austria,
Denmark, and Spain.
2. DOB is considered active high when DOB is held high (connects to VDC) when pressed. DOB is
considered active low when DOB is held low (connects to return) when pressed.
3. EDP is considered active high when EDP is held high (connected to VDC) when no obstruction is
detected. EDP is considered active low when EDP is held low (connects to return) when no
obstruction is detected.
4. DOB and EDP active high/low states can be adjusted in the field using jumpers on the controller
PCBA (Jumpers JP1 & JP2 for DOB and jumpers JP5 & JP6 for EDP).
5. Contact OSC to identify the latest revision of software available.
This document does not contain any technical data subject to EAR or ITAR
Unpublished Work—Otis Elevator Co., 2019 October 2, 2019 Page 3
Controller, OTIS GLIDE® P 10-KAA24360AAL
KAA24360AAL
Page 4 October 2, 2019 This document does not contain any technical data subject to EAR or ITAR
Unpublished Work—Otis Elevator Co., 2019