Professional Documents
Culture Documents
Click to Here
तम्हला नोकरीच्या संदर्भ मध्ये काही update माहहती आमच्या या चॅनेल वर र्ेटलं
join Click To Here
तम्हाला जर नोकरी साठी तुम्हाला लागणारे daily current affair | notes | ebooks
Join Click to Here
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
UNIT I
3)both of above
4) none of above
1/25
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
use of differential equations to describe the dynamic behavior of the system. also to
perform mass properties and finite-element analysis (staticand dynamic analysis).
Engineering Analysis
gemetric modeling
2/25
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
This module provides users with utility and system commands that deal 1 point
with their accounts and file. Typical functions such as file manipulations
(delete, copy, rename, etc.). Managing directories and sub-directories using
text editors, programming and accounts setups are supported by this
module.
application module
Programming module
CAD phase supports the synthesis phase which is concerned with the 1 point
computer compatible mathematical description of the geometry of an
object. The basic functions is to generate geometric elements such as
points, lines, circles, primitives such as cubes and functions such as
scaling, rotation, transformation, joining, wire frame representation,
and
solid modeling.
Engineering Analysis
geometric modeling
3/25
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
A CAD modeler which gives only a geometrical description of the 3D object 1 point
Solid model
surface model
wireframe model
application module
Programming module
Design conceptualization
Design Analysis
4/25
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
application module
Programming module
Best suited modeling method to create nut bolt, pulley etc 1 point
Wireframe modeling
surface modeling
solid modeling
5/25
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
it deals with the way you are going to model your design project 1 point
Modeling strategy
Software modules
Modeling approach
It is a computer software or system that is used to create 3-D and 2-D 1 point
Engineering Analysis
geometric modeling
6/25
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
All
Identify the CAD phase which involve, Dimension, tolerances, bill of 1 point
Design conceptualization
Design evaluation
CAD model that do not have a uniform cross section and/or do not have constant
thickness. Such models usually require more than one sketch in different sketch
planes and use advanced commands such as sweep and loft.
This PLM stage consists of peak sales, lowest cost per customer,high 1 point
profit, mass market an stable no of competitors
Introduction
growth
maturity
decline
4) none of above
8/25
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
The process a product goes through from when it is first introduced into 1 point
This PLM stage consists of low sales, high cost per customers, financial 1 point
Introduction
growth
maturity
decline
This PLM stage consists of falling sales, fall in profit, cost per customer, no 1 point
of competitors
Introduction
growth
maturity
decline
9/25
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
All
In CAD, a technique for representing 3D objects, in which all surfaces are 1 point
visibly outlined in lines, including the opposite sides and all internal
components that are normally hidden from view.
Solid model
surface model
wireframe model
10/25
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
11/25
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
Best suited modeling method to create CAD model of given sketch is 1 point
Wireframe modeling
surface modeling
solid modeling
12/25
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
3)both of above
4) none of above
13/25
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
all
Identify the CAD phase which involve, Geometric modeling techniques, 1 point
Design conceptualization
14/25
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
4) both 2 and 3
15/25
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
is a complete closed loop system of various phases from initial phase of its demand
till it reach to end user.
is associated with marketing and management decisions within businesses, and all
products introduction, growth, maturity, and decline. go through four primary stages:
Is it possible to view CAD models using Web browser without having the 1 point
CAD systems that have created them up and running.
Yes
No
Maybe
16/25
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
Best suited modeling method to create CAD model of given sketch is 1 point
Wireframe modeling
surface modeling
solid modeling
17/25
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
Design conceptualization
Design evaluation
Software support (familiar with various software for import and export)
Vendor support and service (training, filed services, technical support etc)
All
18/25
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
Design conceptualization
Design optimization
Geometric modeling
Computer graphics
Design
Among the 3D modeling approach which doesn't include use of boolean 1 point
operations,
Primitive approach
feature approach
sketching approach
19/25
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
All
This module provides users with system dependent and standard 1 point
application module
programming module
20/25
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
The process of generating ideas for an optimum solution to the design 1 point
problem. These ideas should originate originally from the product concept
and stated definitions of the design problem.
Design conceptualization
Design evaluation
includes
All
21/25
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
Primitive approch
Sketching approch
All
22/25
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
model for analysis purposes or to transfer its CAM database to the shop
floor for production. This module also serves the purpose of translating
databases between CAD/CAM systems using graphics standards such as
IGES and STEP
communication module
application module
programming module
communication module
application module
Collaboration module
23/25
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
It is checking whether the designed part has been designed properly or 1 point
not and if they will fail in practical situations. It includes features like zoom
in/out, layering, checking interference, animation capabilities etc.
Engineering Analysis
geometric modeling
When we create the model cross section in a sketch plane and extrude the 1 point
This PLM stage consists of increasing sales, fall in cost per customer, rise in 1 point
Introduction
growth
maturity
Decline
24/25
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
Design intent
Modeling approach
Associatively
All
profile sketches is
Wireframe modeling
surface modeling
solid modeling
25/25
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
It involves Keeping track of decisions and design reviews and exchange of 1 point
Design conceptualization
26/25
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
UNIT II
A line L1 is drown between two points P1(6,7,-2) and P2(0,4,-5) and L2 1 point
drown between P3(0,7,-2) andP4(6,1,-8).
a set of equations in which the coordinates (e.g., x and y) are expressed in 1 point
All
1/19
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
A line is represented as the end points P1(1,1) and P2(6,2). If the value of 1 point
Pu(0) = [1 1], Pu(0.5) = [3.5 1.5], Pu(-0.5) = [-1.5 0.5], Pu(1) = [6 2], Pu(1.5) = [8.5 2.5]
respectively
Pu(0) = [0 1], Pu(0.5) = [3.0 0.5], Pu(-0.5) = [-1.5 1.5], Pu(1) = [2 6], Pu(1.5) = [8.5 2.5]
respectively
Pu(0) = [1 0], Pu(0.5) = [3.9 1.1], Pu(-0.5) = [-1.5 0.5], Pu(1) = [6 2], Pu(1.5) = [8.5 2.5]
respectively
None of these
Surfaces are used with either open boundaries or given data points and is 1 point
Bezier surface
coon's patch
B spline surface
Tabulated surface
2/19
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
ruled surface
plane surface
surface of revolution
Bezier surface
B spline curve
Bezier curve
NURB
3/19
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
All
a sequence of parameter values that determines where and how the 1 point
control points affect the NURBS curve.
B spline curves
knot vector
all of above
none of above
4/19
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
The geometrical curves like Cubic spline, b-spline or bezier which are 1 point
Analytical curves
Synthetic curves
none of above
both of above
Both the first and second parametric derivatives of the two curve sections 1 point
are the same at their boundary. i.e. two curves have the same curvature at
the end point and have a smooth transition from one curve to another
5/19
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
The geometrical curves like line, circle, ellipse which can be easily 1 point
Analytical curves
Synthetic curves
none of above
both of above
ruled surface
plane surface
Surface of revolution
Bezier surface
6/19
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
Which type of curve is best suited for Products such as car bodies, 1 point
ship hulls, airplane fuselage and wings, propeller blades, shoe insoles, and
bottles.
Analytical Curves
Synthetic curves
both
A line L1 is drown between two points P1(3,4,7) and P2(5,6,1) and L2 drown 1 point
The number of knots is always equal to the number of control points plus curve
degree plus one
The knot vector divides the parametric space in the intervals mentioned before,
usually referred to as knot spans
The values of the knots control the mapping between the input parameter and the
corresponding NURBS value.
7/19
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
Defining endpoints
All
Four points
All
8/19
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
A line passing through a point P1(2,7,3) has a length of 20 units in the 1 point
Endpoint of first line is, [2.26, -7.78, 13] and length of new line is [-0.10 15.00 -2.0]
Endpoint of first line is, [6.26, -9.78, 13] and length of new line is [-0.13 15.39 -2.0]
Endpoint of first line is, [6.62, -7.988, 13] and length of new line is [-0.13 13.59 -2.0]
none of these
B spline curve with given set of data points with curve interpolation
B spline curve with given set of data points with curve extrapolation.
All
9/19
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
the curves considered a unified canonical representation that can define 1 point
Bezier curves
B spline curves
NURBS
Analytical curves
A line L1 is drown between two points P1(3,5,9) and P2(6,7,3) and L2 drown 1 point
These use approximations to produce a smooth curve, and do not pass 1 point
through all the data points, but are influenced by the control points. The
order of the curve is dependent on the number of control points.
Bezier curve
B-spline curve
NURB
10/19
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
general surface that permits twists, and kinks and allows only global control
of the surface.
Bezier surface
plane surface
surface of revolution
Tabulated surface
line
circle
ellipse
NURB
curve is defined by its order, a set of weighted control points, and a knot 1 point
vector.
B spline curve
Bezier curve
NURB
11/19
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
It represents all curve, surface, and solid entities, allowing unification and 1 point
conversion from one CAD system to another via exchange standards (STEP
and IGES).
Bezier curves
B spline curves
NURBS
Analytical curves
A curve is fitted to a set of data points. The tangents at the start and end 1 point
Bezier curve
B-spline curve
NURB
It means that the parametric first derivatives are the same at the 1 point
intersection on two successive sections. i.e. two curve shave the same
tangent at the matched end points.
12/19
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
A circle is defined by the center point (4,6) and radius 5. determine the 1 point
various points on the circle in the first quadrant, if the increment betweeneach
point is 30 degrees.
An ellipse is defined by the center point (8,12) and has major radius of 10 1 point
units and minor radius of 4 units. Determine the various points on the ellipse in
the first quadrant, if the increment between each point is 30 degrees. Assume
major and minor axis of the ellipse are parallel to X and Yaxis respectively.
All
Digitization of the object/ Data Capturing (using CMM, scanners etc.) measuring that
data to create prototype
The large amount of surface data generated from the fast 3D digitizers is not easily
modeled by current CAD/CAM systems.
All
14/19
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
A line is represented as the end points P1(2,4,6) and P2(-3,6,9). If the value 1 point
Pu(0) = [4 4 6], Pu(0.5) = [1.0 4.5 7.75], Pu(-0.5) = [3.25 3.5 5.25], Pu(1) = [-3 6 9],
Pu(1.5) = [-5.5 7 10.5]
Pu(0) = [2 4 6], Pu(0.5) = [0.75 4.5 6.75], Pu(-0.5) = [3.25 3.5 5.25], Pu(1) = [-3 6 9],
Pu(1.5) = [-5.5 7 10.5]
Pu(0) = [4 2 6], Pu(0.5) = [0.75 4.5 6.75], Pu(-0.5) = [3.5 3.5 5.5], Pu(1) = [-3 6 9],
Pu(1.5) = [-5.5 7 10.5]
none of these
15/19
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
Identify the Quality issues in Point cloud data of reverse engineering 1 point
Data loss
All
Two curves sections must have the same coordinate position at the 1 point
boundary point. i.e. when two curves meet at their end points but may not
share same tangency curvature.
general surface that permits twists and kinks and allows only local control
of the surface.
Bezier surface
plane surface
B spline surface
Tabulated surface
16/19
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
Identify the wrong point cloud file format in reverse engineering 1 point
WRL
Identify the correct sentence for point cloud data in reverse engineering 1 point
A point cloud is a set of data points in space. Point clouds are generally produced by
3D scanners, which measure many points on the external surfaces of objects around
them
Geometric dimensions and tolerances can also be extracted directly from the point
cloud.
Point clouds can also be used to represent volumetric data, as is sometimes done in
medical imaging. Using point clouds, multisampling and data compression can be
achieved.
All
17/19
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
These are generalized form of the Curves and have the ability to control 1 point
the curve shape locally as opposed to global control. They also provide the
possibility to add control points without increasing the degree of the
curve.
Bezier curve
B-spline curve
NURB
Offers great flexibility and precision for handling both analytic (surfaces defined
bycommon mathematical formulae) and modeled shapes.
NURBS curves and surfaces are generalizations of both B-splines and Bézier curves
and surfaces
None of above
18/19
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
that define the surface (rails). Rails can be any curves, this surface is ideal
for representing surfaces that do not have any twists or kinks.
ruled surface
plane surface
surface of revolution
Bezier surface
B spline curve
Bezier curve
NURB
It is a curves of 3rd degree polynomial with 4 data points and 4 coefficients 1 point
B spline curve
Bezier curve
NURB
19/19
ZEAL EDUCATION SOCIETY’S
ZEAL COLLEGE OF ENGINEERING AND RESEARCH
NARHE │PUNE -41 │ INDIA
DEPARTMENT OF MECHANICAL ENGINEERING
A line L1 is drown between two points P1(-2,3,5) and P2(4,6,-2) and L2 1 point
drown between P3(-5,8,9) andP4(1,11,2)
20/19