Professional Documents
Culture Documents
2023-5-31 EN
ENGLISH
UK & EIRE
About Megger Table of contents
Megger is a global provider of electrical power asset management, grid performance solutions and General testers ................................................................................................. P4 - P5
predictive analytics that inform and validate asset health decision-making. We design and manufacture
test and measurement instruments that perform electrical measurements for preventative maintenance,
Rolling stock application ................................................................................. P6 - P7
troubleshooting, and commissioning.
Megger’s test and measurement equipment has supported customers all over the world to improve
Substation testing
their facilities’ efficiency, reduce costs, extend the life of apparatus, and through trending and analysis,
anticipate equipment failure and future performance. We have local offices in many locations with Battery testing ........................................................................................................... P8 - P09
technical support teams and distributors all over the world. Our manufacturing sites are located in Switchgear testing ..................................................................................................... P8 - P09
Germany, Sweden, UK, USA and Israel. Transformer testing ................................................................................................... P10 - P11
Protection relay testing ............................................................................................. P12 - P13
Circuit breaker testing ............................................................................................... P14 - P15
Megger in railway applications
Cable fault location and diagnostics ............................................................... P16 - P19
Megger has partnered directly with rail network providers to develop test and measurement equipment
ideally suited for rail applications, and we continue to grow our product portfolio to complement the
rail industry. For example, we have recently added the BALTO range to provide our customers with HV
circuit breaker testing capabilities. If you need specific test applications such as transformer testing,
cable fault finding or insulation testing, Megger is available to support you to make informed decisions
on the lifecycle of your electrical power assets.
2 Electrical
Electrical
testtest
andand
measurement
measurement
solutions
solutions
for for
the Railway
railway Industry
industry www.megger.com
www.megger.com 33
General testers
High voltage discharge rod EST HV test set series MIT400/2 series DLRO2 and DLRO2X DLRO10 MGFL100
For damped discharge and direct, visible Portable HV test sets for DC voltage Cat IV insulation testers for electrical Ducter™ low resistance ohmmeters 10 a low resistance ohmmeters Battery ground fault locator
earthing testing of cables and cable installations and industrial maintenance engineers
Features Features Features
Features Features Features Noise rejection mode with Confidence Accurate results in under three seconds Alarms when the real fault is identified
Available for multiple voltage ranges Available in three versions: 50/80/110 kV Insulation testing up to 1000 V and 200 GΩ Meter™ (DLRO2X) Auto current reversal cancels standing EMFs Adjustable current and voltage limits
For safe discharging and earthing of cables Monitoring functions maximise safety and range Manual and auto save results for export to Fuse protected to 600 V Powered off AC or internal battery
and test units ease of operation Stabilised insulation test voltage USB (DLRO2X) NiMH battery reduces weight Locates faults up to 400 kΩ
Quick and easy to set up Single range, faster continuity testing from Difference Meter for quick data comparisons 250 mW power limit (with optional override) Locates faults on AC or DC systems
Meets individual needs through a modular 0.01 Ω to 1 MΩ Use long leads at 1 A without compromising to avoid heating the test sample Operates on systems up to 600 V
design 600 V TRMS AC and DC voltage test speed Locates faults on low frequency, 16.67 Hz
measurement Safely test the resistance of inductive loads systems
Live circuit detection and protection at 1 A
< 600 V active protection against inadvertent
live connections without blowing a fuse
4 Electrical test and measurement solutions for the railway industry www.megger.com 5
Rolling stock application
Simple operation Full colour graphic display Daylight viewable large 10.4 inch touch Range includes 2 kV, 4 kV, 6 kV, and Comprehensive range of tests in one LED and LCD display with self-test
Auto set up for instant use Three-phase insulation resistance screen 12 kV models instrument Detachable test probes
Ultra fast pulse for near end fault Temperature correction for insulation Included waterproof, industrial keyboard with Testing capabilities include: surge, winding Configurable to meet needs and price point AC/DC Voltage to 1000 V
identification resistance integral mousepad resistance, Megohm, PI, DA, continuous ramp 4 kV to 12 kV for wide spectrum of motors 200 A AC measurement
Trace HOLD feature to allow comparison Guard terminal IEC61010 safety compliant detachable test DC step voltage, and DC hipot tests and coils True RMS on ACV/ACA
between cables DLRO for wire Kelvin leads 12 kV HO (high-output) version for Compatible with the Baker PPX Power Packs Inrush current
IP54 rating offers real life working Continuity and diode test Testing capabilties include: winding resistance, performing surge tests on large motors and for testing up to 40 kV Phase rotation
Designed for use on all metallic cable pairs Capacitance and inductance test insulation resistance, inductance, capacitance, generators High and low voltage tests to characterise
PD on surge, dielectric analysis (DA), circuits and insulation
polarisation index (PI), dielectric analysis
(DA), DC step voltage, DC continuous
ramped, DC HiPot, EAR+™
6 Electrical test and measurement solutions for the railway industry www.megger.com 7
Substation testing
Battery testing
Switchgear testing
8 Electrical test and measurement solutions for the railway industry www.megger.com 9
Substation testing
Transformer testing Transformer testing
Power tranformer test vehicle TRAX TAU3 DELTA4000 TTRU3 OTS and OTD MVCT
Comprehensive portable transformer Transformer and substation test system True three-phase transformer winding 12 kV dissipation factor / tan True three-phase turns Breakdown voltage (OTS) and VT and CT test set
testing analyser delta system ratiometer oil insulation dissipation factor
Features Features
Features
(OTD) test sets
Features State of the art measurement methods for Features Features Ability to test both VTs and CTs
Routine and advanced diagnostic tests advanced diagnostic testing Turns ratio, winding resistance, adaptative Capacitance and dissipation Guaranteed accuracy ±0.10 % Features CT knee points up to 30 kV
Centralised control and reporting Winding and contact resistance measurement demagnetization, short-circuit impedance, factor (power factor/tan delta) from -20 °C to +50 °C Laboratory instrument for CT grouped testing includes
Automated test circuit arrangement and up to 100 A true DC for best accuracy magnetic balance test set Step-up ratio testing measuring insulating oil demagnetisation, knee points,
switching process Adaptive algorithm for faster and optimal Accuracy guaranteed from -20 ºC to +50 ºC Automatic and manual Step-down ratio testing breakdown voltage (OTS) ratios, saturation curves,
Safe operation and user guidance through transformer demagnetization Save time and protect operators with operation Magnetic balance test Integrated test cell heating and winding resistances, polarities
the tests True dynamic resistance measurement of efficient one-time lead connection for all Accurate and repeatable capabilities cooling systems (OTD) and phase deviation (on all taps
Easy extraction of mounted instruments on-load tap changer tests measurement results with high Confirmation of expected Efficient oil fill and integrated of multi-ratio CTs)
Two sets of cables (HV and LV) are shared ITC corrected tan delta/power factor and noise suppression nameplate vector configuration automated oil drain facility VT testing including
among different instruments capacitance testing at 12 kV / 500 mA Lightweight, rugged two-piece Ability to measure actual vs (OTD-OTS) demagnetisation, ratio, winding
Built-in circuit breaker analyser design expected phase shift Fully automated standard and resistance, polarity and phase
Manual mode for advanced trouble shooting New built-in Individual One touch automatic OLTC user-defined tests. Supports all deviation
or for designing your own test Temperature Correction (ITC testing.. international standards (OTD- Performs secondary burden tests
patent pending) OTS) and more Integrated 1 kV DC insulation
1 Hz assessment test system
10 Electrical test and measurement solutions for the railway industry www.megger.com 11
Substation testing
Protection relay testing - Single-phase testing
SMRT1D SVERKER780
Single-phase relay tester Single-phase relay test sets
Features Features
Small, rugged, lightweight, and powerful The engineer’s toolbox for all single-phase
Operate with or without a computer relay testing
Intuitive manual operation with Smart Touch Standalone functionality
View Interface (STVI) Rugged and reliable for field use
Built-in display (SMRT1D) Its powerful measurement section can display
Learn more about
High current, high power (75 Amps/400 (in addition to time, voltage, and current) Z,
VARMS) R, X, S, P, Q, phase angle, and cos φ single-phase relay
Network interface provides IEC 61850 test testers
capabilities https://megger.link/single-phase-relay
Fully automated testing using RTMS software
and more
SMRT46D SVERKER900
Multi-phase relay tester Relay and substation test system
FeaturesFeatures Features
Integrated Smart Touch View Interface™ STVI The testbox for substation three-phase
provides stand-alone operation using intuitive testing
high resolution graphic touchscreen, no PC 3 currents and 4 voltages
required to operate Standalone functionality
4 voltage channels, 3 current channels, with Rugged and reliable for field use
Learn more about
convertible voltage channels provides 1 Generation of 900 V and 105 A in
voltage and 6 currents single-phase mode multi-phase relay
High current output - 60 Amps at 300 VA per Secondary and primary testing testers
phase https://megger.link/multi-phase-relay
Convertible voltage channels – 15 Amps at
120 VA
12 Electrical test and measurement solutions for the railway industry www.megger.com 13
Substation testing
Circuit breaker testing
https://megger.link/Balto
14 Electrical test and measurement solutions for the railway industry www.megger.com 15
Cable fault location and diagnostics
Cable fault location
TDR 2000 series Teleflex® SX-1 EZ-THUMP 3 kV and EZ-THUMP 4 kV, MFM10 HVB10 digiPHONE+2 NTRX Set
Advanced dual-channel TDR Portable radar/time domain reflectometer model V2 Sheath fault location system High voltage bridge for fault location in digiPHONE+2, plus ESG earth rods and
Highly portable fault location systems for long cables Ferrolux receiver
Features Features Features
LV networks
CAT IV 600 V and IP54 rating Standalone operation or operation in Test voltage up to ±10 kV DC Features Features
Auto set up mode for instant, easy use conjunction with surge wave generators Features Up to 750 mA continuous current, also Top class measurement and accuracy Acoustic-magnetic cable fault location
AutoFind and FindEnd functions helps find (thumpers) Dual stage 500 J surge energy at 1.5 kV and suitable for burning Automatic test sequence Automatic filtering of Interference signal
the fault fast Single jog dial operation with pie chart 3.0 kV EZ-Thump 3 kV only Adjustable current limiter Bipolar pre-location for the elimination of Cable compass
Trace tagging facility that allows a name to interface and no-user-intervention Auto mode Single stage 500 J surge energy at 4.0 kV Bipolar measurement for highest accuracy external influences Display of cable depth/current/direction
be saved with the trace ARM® EZ-Thump 4 kV only Only one removable HV connection cable Detection and indication of wrong Bluetooth® headphone
Distance dependent gain to counteract signal Multi-shot technology with 15 fault traces per F-OHM HV interlock to ensure safe earthing connections Lightweight sensor (900 g)
attenuation arc reflection shot Battery and AC line operation Only one HV connection cable
Step function to improve detection of near Automatic end-of-cable and fault locating Completely independent of the parameters of
end faults auxiliary lines
easyGo operating system
Display with high contrast for good True portable outdoor-ready unit, IP43 Precise location, even above a bunch of Identifies a de-energized primary cable safely
readability by day and night Very easy to use “turn and click” single cables, with SignalSelect Identifies live secondary cables up to 240 V AC
Current direction indication for clear cable rotary knob interface Multi-frequency operation prevents manual Avoids false positives..
identification Surge/thump energy 2000 Joule switching
Transmitter with two output signals to DC testing up to 40 kV, surging/thumping up Durable operation
distinguish between cables lying side by side to 32 kV, burning up to 40 kV
16 Electrical test and measurement solutions for the railway industry www.megger.com 17
Cable fault and diagnostics
Cable testing and diagnostics
18 Electrical test and measurement solutions for the railway industry www.megger.com 19
Generating
Generating andand
ensuring a
ensuring
faultless
faultlesspower supply
power supply