Professional Documents
Culture Documents
N2 Engineering Drawing April 2023 Memorandum PDF
N2 Engineering Drawing April 2023 Memorandum PDF
NATIONAL CERTIFICATE
ENGINEERING DRAWING N2
18 April 2023
√ ½ mark
1 mark
NOTE: Scanning and copying of drawings from DRAWING PROGRAMS may affect
accuracy. Therefore, centre managers are urged to ensure that ALL markers
prepare their own marking guidelines to mark candidates' work.
QUESTION 1
1.2
(4)
NOTE:
1 mark for correct
symbol
1 mark for all
round
(2)
1.3.2
NOTE:
1 mark for correct
symbol
1 mark for on-site
(2)
1.3.3
NOTE:
1 mark for correct
symbol
1 mark for arrow
side
(2)
[14]
4
1 2
√
√5
√ 6
3 √
3 6√
√
5√
4√
MARKING CRITERIA
Correctness 6
Line work 2
Accuracy 1
Layout and neatness 1
TOTAL: 10
3
2√ 4√
5
1√
1√
1 5
4√
NOTES:
½ mark for every dimension 2√
correctly shown. Full marks
cannot be awarded if
dimension is not the true
dimension e.g., it must read
R10 and not R5 as physically 3
drawn (scale 1:2) There must 6
be 3 dimensions per view.
Candidate can only be
awarded full marks for M44
nut if drawn with instruments,
and not freehand.
7√
9
7√
9 8√
8
√
6
FS FV
TV
6 2 mark for rings and flywheel detail (shown at different height) 2 marks
7 1 mark for the Ø56 shaft 1 mark
8 1 mark for the piston construction 1 mark
9 2 marks for the M45 nut 2 marks
TOTAL 6 marks
4√
4√
4√ 4√ 4√
4√
4√
4√
1√
5√ 5√
1√ 3√
2√
3√
2√
P
MARKING CRITERIA
Correctness 8
Point P in the correct position 1
Line work 3
Accuracy 2
Layout and neatness 1
TOTAL: 15
QUESTION 6
8√
1√ 5√ 9√
2√
3√
7√
5√
4√ 6√
6√
4√
5√
9√ 7√
2√ 3√
1√ 5√
8√
S FV
1 1 mark for base 1 mark
2 1 mark for centre lines indicating the position of holes 1 mark
3 1 mark for ribs 1 mark
4 1 mark for Ø40 hole and section not hatched 1 mark
5 2 marks for correct hatching 2 marks
TOTAL 6 marks
RV
6 1 mark for Ø60 hole and Ø40 hole showing line where cut 1 mark
7 1 mark for Ø12 holes and face 1 mark
8 1 mark for arcs and outer edges 1 mark
9 1 mark for ribs 1 mark
TOTAL 4 marks
TOTAL: 100
Copyright reserved