Professional Documents
Culture Documents
Alfastreet Disk Protection Management-Quick Guide
Alfastreet Disk Protection Management-Quick Guide
MANAGEMENT
QUICK GUIDE
1 DISK PROTECTION
Alfastreet machines feature disk protection for system partition (C:\). Changes to Windows
operating system and/or C:\ drive will be lost after the computer is restarted if they were
performed with disk protection enabled. This ensures system critical file are protected
against tampering.
Switching the method midway through the process is not possible, make sure to complete
either method in full, from start to finish. The following chapters contain step-by-step
instructions for both.
1.1 Disk protection management using GUI
This method is available on newer disk images only and is the quicker method of the two.
It is also the recommended method, if available. To implement changes to system drive
follow the steps below:
4. Enhanced Write Filter windows will appear, highlight C: from the list.
5. With C: highlighted, select Commit from the Pending command options.
6. Press OK.
7. Restart the computer, changes will be saved (commited) and the protection will
remained enabled.
1.2 Disk protection management using scripts
This method is universal and available on all disk images, it should be used when method
with GUI is not available. To implement changes to system drive follow the steps below:
2. Using keyboard type a2013 (nothing will appear in the window) and press Enter.
7. Using keyboard type a2013 (nothing will appear in the window) and press Enter.
8. Computer will restart, changes will be saved and disk protection will be enabled.
Pockaj d.o.o. | Partizanska cesta 129 A | 6210 Sezana | Slovenia
VAT No: SI67603793 | Tel.: +386 5 70 72 100 | www.alfastreet.si | info@alfastreet.si