Professional Documents
Culture Documents
80-50003-002
Rev C1
saf-Tglo Systems
This document is for reference only. Always refer back to the approved installation instruction.
System Description
Installation to be in accordance with Service Bulletin.
Note: Track system shown is SSUL-X (18mm width).
The same procedures and installation rules apply for
SSUL-X11, SSUL-X23, SSUL-X36, SSUL, SSUL23, saf-Tglo® blu,
PatternMatch™ and BrandMatch™ products.
11mm systems 11mm systems with Filler For spare parts contact STG Aerospace:
Optional
Filler
UK: +44 (0) 1760 723232
USA: +1 (305) 828 9811
12mm 12mm
24mm 24mm
OverCarpet systems
Adhesive/Sealant
36mm systems
(provided in kit)
OverCarpet™
Optional
Filler On-wing glue scraper
37mm
and shim (provided in kit).
P/N: 85-50014-001 or 85-50007-001
21mm
This document is for reference only. Always refer back to the approved installation instruction.
Installation Rules
FWD
OR
304.8mm MIN
Use pre-cut lateral
extension assembly
or cut 2m assembly
to length
>150mm >150mm
AFT
This document is for reference only. Always refer back to the approved installation instruction.
Installation Rules
Seats
saf-Tglo must be between the inner edge of saf-Tglo must be between the inner edge of
baggage bar and 25mm out from seat arm. baggage bar and 25mm out from seat arm.
OverCarpet™ wing can lie under bar.
This document is for reference only. Always refer back to the approved installation instruction.
Cutting and joins
Saw/Hand shears
This document is for reference only. Always refer back to the approved installation instruction.