Professional Documents
Culture Documents
Carb Check GX V 630 660 690 en
Carb Check GX V 630 660 690 en
Pilot jet
1
Remove foreign GX630/660/690 Vor Überprüfung des Vergasers Zündung & Kompression prüfen
2
Engine does not start or stop Pilot jet air Remove foreign
Hard starting 5 path clogged. materials/dirt.
Engine starts but quickly stops
Printed In Belgium - Published by: Honda Motor Europe Logistics NV - Specifications can be changed without notice - Edition: ENG 8286 Sept. 2017
3
3 Main jet Remove foreign
Main jet
clogged.
Remove foreign
materials/dirt.
4 clogged.
Use needle A (Ф 0.5) to clean
materials/dirt.
Use needle A (Ф 0.5) to clean
4
9 6 4
Remove foreign
Main nozzle
Main nozzle Remove foreign clogged. materials/dirt.
clogged. materials/dirt.
5
5 Main nozzle air Remove foreign
Main nozzle air Remove foreign path clogged. materials/dirt.
path clogged. materials/dirt.
6
3 Fuel 6 Blow air and
Fuel Blow air and check the screen
check the screen strainer screen
strainer screen clogged. for clogging.
clogged. for clogging.
7
7
Remove foreign
Float doesn't materials around Overflow
move properly. float pin. Gasoline leaks
8 10 Float valve worn
8
or coated with Remove foreign
Check of float chamber 11 foreign materials/ materials/dirt.
dirt.
Water inside Float chamber cause 11 : Air flow
engine failure. 9
Take off Float chamber and clean. : Fuel flow Valve seat worn
or coated with Remove foreign
foreign materials/ materials/dirt.
12 : Mixture dirt.
Don't damage the seat surface