Professional Documents
Culture Documents
UT593/595
Insula�on resistance (Ω) 500V 0.05MΩ~500MΩ
1000V 0.05MΩ~1000MΩ
Short-circuit current <2mA
Multifunction Installation Testers Range 0.00Ω~199Ω ±(2%+5)
Low-resistance con�nuity test
Test current 0.00~2Ω: >200mA √
Range 0.01Ω~2000Ω ±(5%+5)
Opera�ng voltage (Frequency) 195V~440V (45Hz~65Hz) √
Line impedance (Ω)
Test current 20A √
PFC test 0kA~26kA √
Range 0.01Ω~2000Ω ±(5%+5)
Opera�ng voltage (Frequency) 195V~253V (45Hz~65Hz) √
Loop impedance (Ω)
Test current 20A √
PFC test 0kA~26kA √
Range 1.00Ω~2000Ω ±(5%+5)
Opera�ng voltage (Frequency) 195V~253V (45Hz~65Hz) √
Non-trip loop impedance (Ω)
Test current 15mA √
UT593 UT595
PFC test 0kA~26kA √
Opera�ng voltage (Frequency) 195V~253V (45Hz~65Hz) √
Test current 10mA/30mA/100mA/300mA/500mA ±10%
● 9999-count LCD display with analogue bar Trip �me ×1/2 *I△n Range: 0ms~2000ms ±(5%+5)
● 250V~1000V DC insula�on resistance test ×1 *I△n Range: 0ms~300ms
● 200mA earth-resistance con�nuity test ×1 *I△n Range: 0ms~500ms
RCD test
● Loop impedance/Prospec�ve Fault Current (PFC) (Select count down)
● 0°/180° phase angle op�on to detect the fastest Phase sequence test Display
Phase sequence: L1→ L2→ L3, forward
√
rota�on; L1→ L3→ L2 reverse rota�on
trigger �me
Test current 10mA/30mA/100mA/300mA/500mA ±10%
● Trip current test of RCD trip �me X2
Range 0V~440V ±(5%+2)
● RCD trip trigger current test
AC voltage (V) Frequency response 45Hz~60Hz √
● Phase sequence and missing test
Resolu�on 1V √
● AC/DC voltage auto check and test
Safety CAT III 300V
● Connec�on check with status real-�me display
● White backlight; auto power off
www.uni-trend.com