Professional Documents
Culture Documents
■GENERAL DESCRIPTION
The XC6420 series is a small dual CMOS LDO regulator with 2-channel 150mA outputs. The series features high speed,
high accuracy, high ripple rejection and low dropout voltage. The series is capable of high density board installation by the
small package of two low on-resistance regulators. Each output voltage is internally set in a range from 1.2V to 3.6V in
increments of 0.05V with ±2% accuracy.
The EN function controls the two regulators on/off independently. In the stand-by mode, the electric charge at the output
capacitor CL is discharged via the internal switch and as a result the VOUT pin quickly returns to the VSS level.
The series is also compatible with low ESR ceramic capacitors. The high level of output stability is maintained even during
frequent load fluctuations, due to the excellent transient response performance. The two regulators are completely isolated so
that a cross talk during load fluctuations is minimized.
■FEATURES
■APPLICATIONS Maximum Output Current : 150mA
● Smart phones / Mobile phones Operating Voltage Range : 1.6V~5.5V
Output Voltage : 1.2V~3.6V (±2%) 0.05V increments
● Portable game consoles
Dropout Voltage : 190mV @IOUT=150mA (VOUT=3.3V)
● Digital audio equipments Low Power Consumption : 55μA / ch (TYP.)
● Digital still cameras / Camcorders Stand-by Current : 0.1μA
Ripple Rejection : 75dB@1kHz
EN Function : Active High
CL High Speed Auto Discharge
Protection Circuit : Current Limit 250mA (TYP.)
Short Circuit 50mA (TYP.)
Output Capacitor : 1.0μF Ceramic Capacitor
Operating Ambient Temperature : -40℃~+85℃
Packages : SOT-26
USPN-6
USP-6B04
Environmentally Friendly : EU RoHS Compliant, Pb Free
XC6420(VOUT=1.8V)
VIN=3.0V+0.5Vp- pAC, Ta=25℃
CIN=0.1μF(ceramic), CL =1.0μF(ceramic)
100
Ripple Rejection Rate : RR (dB)
80
60
40 IOUT=0.1mA
IOUT=1mA
20 IOUT=30mA
IOUT=100mA
0
0.1 1 10 100 1000
Ripple Frequency : f (kHz)
1/26
XC6420 Series
■PIN CONFIGURATION
■PIN ASSIGNMENT
PIN NUMBER
2/27
XC6420
Series
■ PRODUCT CLASSIFICATION
●Ordering Information
XC6420①②③④⑤⑥-⑦(*1)
Selection Guide
CURRENT EN PULL-DOWN CL
TYPE
LIMITTER RESISTOR DISCHARGE
3/27
XC6420 Series
DESIGNATOR ③④
4/27
XC6420
Series
■BLOCK DIAGRAMS
* Diodes inside the circuits are ESD protection diodes and parasitic diodes.
5/27
XC6420 Series
■ELECTRICAL CHARACTERISTICS
●XC6420 series
Regulator1, Regulator2 Ta=25℃
Maximum Output
IOUTMAX VEN =VIN 150 - - mA ①
Current
VEN =VIN
Load Regulation ∆VOUT - 25 45 mV ①
0.1mA≦IOUT≦150mA
Dropout Voltage Vdif IOUT =150mA, VEN =VIN See “OUTPUT VOLTAGE CHART” mV ①
VEN =VIN
Supply Current ISS - 55 105 μA ②
IOUT =0mA
Stand-by Current ISTB VEN =VSS - 0.01 0.1 μA ②
2.5V≦VIN≦5.0V
(V OUT(T)≦2.0V)
∆VOUT/ VEN=VIN, IOUT =30mA
Line Regulation - 0.02 0.1 %/V ①
(∆VIN・VOUT) VOUT(T)+0.5V≦VIN≦5.5V
(V OUT(T)≧2.05V)
VEN=VIN, IOUT =30mA
Input Voltage VIN - 1.6 - 5.5 V ①
Output Voltage
∆VOUT/
Temperature VEN =VIN, IOUT=10mA ppm
(∆Topr・ - ±100 - ①
Characteristics -40℃≦Ta≦85℃ /℃
VOUT)
(R&D Value)
VEN =VIN
Power Supply
PSRR VIN{VOUT(T)+1.0}+0.5Vp-pAC - 75 - dB ③
Rejection Ratio
IOUT =30mA, f=1kHz
Limit Current ILIM VEN =VIN 150 250 - mA ①
VEN =VIN
Short Current ISHORT - 50 - mA ①
VOUT=VSS
EN”H”Level Voltage VENH - 1.0 - 5.5 V ①
EN”L”Level Voltage VENL - - - 0.3 V ①
EN”H”Level Current IENH VEN =VIN =5.5V 2.5 6.0 9.1 μA ①
EN”L”Level Current IENL VEN =VSS -0.1 - 0.1 μA ①
VIN =5.5V, VEN =VSS
CL Discharge Resistor RDCHG - 300 - Ω ①
V OUT =2.0V
NOTE:
Unless otherwise stated, VIN=VOUT(T) +1V, IOUT=1mA, CIN=CL=1.0μF.
(*1)VOUT(E) : Effective output voltage
(*2)Characteristics of the actual VOUT(E) by setting output voltage is shown in the voltage chart.
(*3)VOUT(T): Nominal output voltage
(*4)Vdif={VIN1-VOUT1}
VIN1: The input voltage when VOUT1 appears as input voltage is gradually decreased.
VOUT1: A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT{VOUT(T)+1.0V} is input.
(*5)Each channel is measured when the other channel is turned off (VEN=VSS).
6/27
XC6420
Series
NOMINAL NOMINAL
OUTPUT DROPOUT OUTPUT DROPOUT
OUTPUT OUTPUT
VOLTAGE VOLTAGE VOLTAGE VOLTAGE
VOLTAGE VOLTAGE
(V) (mV) (V) (mV)
(V) (V)
7/27
XC6420 Series
■OPERATIONAL EXPLANATION
The voltage divided by resistors Rx1 & Rx2 is compared with the internal reference voltage by the error amplifier. The
P-channel MOSFET connected to the VOUT pin is then driven by the subsequent output signal. The output voltage at the
VOUT pin is controlled & stabilized by a system of negative feedback. The current limit circuit and short protect circuit
operate in relation to the level of output current. Further, the IC's internal circuitry can be shutdown via the EN pin's
signal.
<EN Pin>
The IC's internal circuitry can be shutdown via the signal from the EN pin with the XC6420 series. In shutdown mode, the
series enables the electric charge at the output capacitor CL to be discharged via the internal switch between VOUT pin and
VSS pin, and as a result the VOUT pin quickly returns to the VSS level.
The EN pin is internally pulled down by a resistor. Please note that input current through a pull-down resistor exists.
8/27
XC6420
Series
■NOTES ON USE
1. For temporary, transitional voltage drop or voltage rising phenomenon, the IC is liable to malfunction should the ratings
be exceeded.
3. Where wiring impedance is high, operations may become unstable due to the noise and/or phase lag depending on
output current. Please strengthen VIN and VSS wiring in particular.
4. Please wire the input capacitor (CIN) and the output capacitor (CL) as short and close to the IC as possible.
9/27
XC6420 Series
■TEST CIRCUITS
●Circuit ①
CIN =1uF
V
(ceramic)
V
IOUT2
A EN2 VOUT2 A
VSS
V
CL=1uF
(ceramic)
●Circuit ②
VIN
EN1 VOUT1
CIN =1uF
(ceramic) CL =1uF
V (ceramic)
EN2 VOUT2
VSS
CL =1uF
A (ceramic)
●Circuit ③
V
V
IOUT2
EN2 VOUT2 A
VSS
V
CL =1uF
(ceramic)
10/27
XC6420
Series
1.2 1.2
1.0 1.0
0.8 0.8
0.6 0.6
Ta=85℃ VIN=1.6V
0.4 0.4 VIN=2.2V
Ta=25℃
VIN=2.7V
0.2 Ta=-40℃ 0.2
VIN=5.5V
0.0 0.0
0 50 100 150 200 250 300 350 0 50 100 150 200 250 300 350
OutputCurrent : IOUT (mA) OutputCurrent : IOUT (mA)
XC6420(VOUT=1.8V) XC6420(VOUT=1.8V)
Ta=25℃
VIN=2.8V, CIN=1.0μF(ceramic), CL=1.0μF(ceramic) CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
2.0 2.0
1.8 1.8
OutputVoltage : VOUT (V)
1.6 1.6
1.4 Ta=85℃ 1.4 VIN=1.9V
VIN=2.3V
1.2 Ta=25℃
1.2 VIN=2.8V
1.0 1.0 VIN=3.3V
Ta=-40℃ VIN=5.5V
0.8 0.8
0.6 0.6
0.4 0.4
0.2 0.2
0.0 0.0
0 50 100 150 200 250 300 350 0 50 100 150 200 250 300 350
OutputCurrent : IOUT (mA) OutputCurrent : IOUT (mA)
XC6420(VOUT=2.5V) XC6420(VOUT=2.5V)
Ta=25℃
VIN=3.5V, CIN=1.0μF(ceramic), CL=1.0μF(ceramic) CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
3.0 3.0
2.5 2.5
OutputVoltage : VOUT (V)
OutputVoltage : VOUT (V)
VIN=2.6V
2.0 Ta=85℃ 2.0 VIN=3V
Ta=25℃ VIN=3.5V
1.5 1.5 VIN=4V
Ta=-40℃ VIN=5.5V
1.0 1.0
0.5 0.5
0.0 0.0
0 50 100 150 200 250 300 350 0 50 100 150 200 250 300 350
OutputCurrent : IOUT (mA) OutputCurrent : IOUT (mA)
11/27
XC6420 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
1.25
1.0
0.8 1.20
0.6 1.15
IOUT=1mA
0.4 IOUT=1mA
IOUT=10mA
IOUT=10mA
1.10 IOUT=30mA
0.2 IOUT=30mA
IOUT=100mA
IOUT=100mA
0.0 1.05
0.0 1.0 2.0 3.0 4.0 5.0 6.0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5
InputVoltage : VIN (V) InputVoltage : VIN (V)
XC6420(VOUT=1.8V) XC6420(VOUT=1.8V)
Ta=25℃ Ta=25℃
CIN=1.0μF(ceramic), CL=1.0μF(ceramic) CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
2.0 1.90
OutputVoltage : VOUT (V)
1.85
1.5
1.80
1.0
1.75
IOUT=1mA IOUT=1mA
0.5 IOUT=10mA IOUT=10mA
IOUT=30mA 1.70 IOUT=30mA
IOUT=100mA IOUT=100mA
0.0 1.65
0.0 1.0 2.0 3.0 4.0 5.0 6.0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5
InputVoltage : VIN (V) InputVoltage : VIN (V)
12/27
XC6420
Series
2.5
OutputVoltage : VOUT (V)
0.0 2.35
0.0 1.0 2.0 3.0 4.0 5.0 6.0 3.0 3.5 4.0 4.5 5.0 5.5
InputVoltage : VIN (V) InputVoltage : VIN (V)
XC6420(VOUT=3.6V) XC6420(VOUT=3.6V)
Ta=25℃ Ta=25℃
CIN=1.0μF(ceramic), CL=1.0μF(ceramic) CIN=1.0μF(ceramic), CL=1.0μF(ceramic)
4.0 3.70
3.5
OutputVoltage : VOUT (V)
3.65
3.0
2.5 3.60
2.0
1.5 3.55
IOUT=1mA IOUT=1mA
1.0 IOUT=10mA IOUT=10mA
IOUT=30mA
3.50
IOUT=30mA
0.5 IOUT=100mA IOUT=100mA
0.0 3.45
0.0 1.0 2.0 3.0 4.0 5.0 6.0 4.0 4.5 5.0 5.5
InputVoltage : VIN (V) InputVoltage : VIN (V)
0.4
0.6
0.5 ※ Below the minimum operating Voltage
0.3
0.4
0.3 0.2
13/27
XC6420 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
Ta=-40℃ Ta=-40℃
0.3 0.3
0.2 0.2
0.1 0.1
0.0 0.0
0 25 50 75 100 125 150 0 25 50 75 100 125 150
OutputCurrent : IOUT (mA) OutputCurrent : IOUT (mA)
100 100
75 75
50 50
Ta=85℃ Ta=85℃
25 25 Ta=25℃
Ta=25℃
Ta=-40℃ Ta=-40℃
0 0
0 1 2 3 4 5 6 0 1 2 3 4 5 6
InputVoltage : VIN (V) InputVoltage : VIN (V)
XC6420(VOUT=2.5V) XC6420(VOUT=3.6V)
100 100
75 75
50 50
Ta=85℃ Ta=85℃
25 25
Ta=25℃ Ta=25℃
Ta=-40℃ Ta=-40℃
0 0
0 1 2 3 4 5 6 0 1 2 3 4 5 6
InputVoltage : VIN (V) InputVoltage : VIN (V)
14/27
XC6420
Series
1.20 1.80
IOUT=1mA IOUT=1mA
1.15 IOUT=10mA 1.75 IOUT=10mA
IOUT=30mA IOUT=30mA
IOUT=100mA IOUT=100mA
1.10 1.70
-50 -25 0 25 50 75 100 -50 -25 0 25 50 75 100
AmbientTemperature : Ta (℃) AmbientTemperature : Ta (℃)
XC6420(VOUT=2.5V) XC6420(VOUT=3.6V)
2.55 3.65
2.50 3.60
IOUT=1mA IOUT=1mA
2.45 IOUT=10mA 3.55 IOUT=10mA
IOUT=30mA IOUT=30mA
IOUT=100mA IOUT=100mA
2.40 3.50
-50 -25 0 25 50 75 100 -50 -25 0 25 50 75 100
AmbientTemperature : Ta (℃) AmbientTemperature : Ta (℃)
90
1.0
SupplyCurrent : ISS (μA)
80
70 0.8
60
0.6
50
40 VOUT=1.2V 0.4
VOUT=1.8V EN"H"LEVEL
30 VOUT=2.5V
VOUT=3.6V
0.2 EN"L"LEVEL
20
10 0.0
-50 -25 0 25 50 75 100 -50 -25 0 25 50 75 100
AmbientTemperature : Ta (℃) AmbientTemperature : Ta (℃)
15/27
XC6420 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
XC6420(VOUT=2.5V) XC6420(VOUT=3.6V)
VIN=0V→3.5V, tr=5μS, Ta=25℃ VIN=0V→4.6V, tr=5μS, Ta=25℃
CIN=0.1μF(ceramic), CL=1.0μF(ceramic) CIN=0.1μF(ceramic), CL=1.0μF(ceramic)
6.0 6.0 6.0 6.0
Input Voltage
IOUT=0.1mA
2.0 IOUT=1mA 4.0 2.0 Output Voltage 4.0
IOUT=30mA
IOUT=100mA
0.0 Output Voltage
3.0 0.0 3.0
16/27
XC6420
Series
1mA 0.1mA
1.05 0 1.05 0
Time (20μs/div) Time (100μs/div)
XC6420(VOUT=1.8V) XC6420(VOUT=1.8V)
IOUT=1mA⇔100mA, tr=tf=0.5μS, Ta=25℃ IOUT=0.1mA⇔150mA, tr=tf=0.5μS, Ta=25℃
VIN=2.8V, CIN=CL=1.0μF(ceramic) VIN=2.8V, CIN=CL=1.0μF(ceramic)
1.90 500 1.90 750
Output Current : IOUT (mA)
1mA 0.1mA
1.65 0 1.65 0
Time (20μs/div) Time (100μs/div)
17/27
XC6420 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
1mA 0.1mA
2.35 0 2.35 0
Time (20μs/div) Time (100μs/div)
XC6420(VOUT=3.6V) XC6420(VOUT=3.6V)
IOUT=1mA⇔100mA, tr=tf=0.5μS, Ta=25℃ IOUT=0.1mA⇔150mA, tr=tf=0.5μS, Ta=25℃
VIN=4.6V, CIN=CL=1.0μF(ceramic) VIN=4.6V, CIN=CL=1.0μF(ceramic)
3.70 500 3.70 750
Output Current : IOUT (mA)
1mA 0.1mA
3.45 0 3.45 0
Time (20μs/div) Time (100μs/div)
IOUT=0.1mA
IOUT=1mA
1.0 IOUT=30mA
2.0 1.0 Output Voltage 2.0
IOUT=100mA
0.0 1.5 0.0 1.5
Output Voltage
18/27
XC6420
Series
80 80
60 60
40 IOUT=0.1mA 40 IOUT=0.1mA
IOUT=1mA IOUT=1mA
20 IOUT=30mA 20 IOUT=30mA
IOUT=100mA IOUT=100mA
0 0
0.1 1 10 100 1000 0.1 1 10 100 1000
Ripple Frequency : f (kHz) Ripple Frequency : f (kHz)
XC6420(VOUT=2.5V) XC6420(VOUT=3.6V)
VIN=3.5V+0.5Vp-pAC, Ta=25℃ VIN=4.6V+0.5Vp-pAC, Ta=25℃
CIN=0.1μF(ceramic), CL=1.0μF(ceramic) CIN=0.1μF(ceramic), CL=1.0μF(ceramic)
100 100
Ripple Rejection Rate : RR (dB)
80 80
60 60
40 IOUT=0.1mA 40 IOUT=0.1mA
IOUT=1mA IOUT=1mA
20 IOUT=30mA 20 IOUT=30mA
IOUT=100mA IOUT=100mA
0 0
0.1 1 10 100 1000 0.1 1 10 100 1000
Ripple Frequency : f (kHz) Ripple Frequency : f (kHz)
19/27
XC6420 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
1.05 0 3.15 0
Time (200μs/div) Time (200μs/div)
1 1
0.1 0.1
0.01 0.01
0.1 1 10 100 0.1 1 10 100
Frequency : f (kHz) Frequency : f (kHz)
XC6420(VOUT=3.3V)
VIN=5.0V, Ta=25℃
CIN=CL=1.0μF(ceramic)
100
Output Noise Density : (μV/√Hz)
Frequency-Range : 0.1~100kHz
Output Noise : 83.87μVrms
10
IOUT=30mA
0.1
0.01
0.1 1 10 100
Frequency : f (kHz)
20/27
XC6420
Series
■PACKAGING INFORMATION
●SOT-26
6 5 4
0.65
C0
.0
75
0.25
6 5 4
0.5
C0
0.4
.0
5
21/27
XC6420 Series
0.18
0.4
0.94
●USP-6B04 Reference Metal Mask Design
22/27
XC6420
Series
て
1. Measurement Condition
Condition: Mount on a board
Ambient: Natural convection
Soldering: Lead (Pb) free
Board: Dimensions 40 x 40 mm (1600 mm2 in one side)
Copper (Cu) traces occupy 50% of the board area
In top and back faces
Package heat-sink is tied to the copper traces
Material: Glass Epoxy (FR-4)
Thickness: 1.6 mm
Through-hole: 4 x 0.8 Diameter
Pd-Ta特性グラフ
Pd vs. Ta
Dissipation: Pd (mW)
700
600
許容損失Pd(mW)
500
400
300
200
Power
100
0
25 45 65 85 105 125
周囲温度Ta(℃)
Ambient Temperature: Ta (℃)
23/27
XC6420 Series
1. Measurement Condition
Condition: Mount on a board
Ambient: Natural convection
Soldering: Lead (Pb) free
Board: 40 x 40 mm (1600 mm2)
4 Copper Layers
Each layer is connected to the package heat-sink
and terminal pin No.1.
Each layer has approximately 800mm2 copper area.
Material: Glass Epoxy (FR-4)
Thickness: 1.6 mm
Through-hole: 4 x 0.8 Diameter
Pd vs Ta
Power Dissipation Pd(mW)
700
600
500
400
300
200
100
0
25 45 65 85 105 125
Ambient TemperatureTa(℃)
24/27
XC6420
Series
1. Measurement Condition
Pd vs Ta
Power Dissipation Pd(mW)
700
600
500
400
300
200
100
0
25 45 65 85 105 125
Ambient TemperatureTa(℃)
25/27
XC6420 Series
■MARKING RULE
●SOT-26 6 5 4
① represents product series
① ② ③ ④ ⑤
MARK PRODUCT SERIES
2 XC6420******-G
1 2 3
SOT-26
②③ represents output voltage
(TOP VIEW)
ex.)
MARK
PRODUCT SERIES
② ③
0 1 XC6420**01**-G
●USPN-6/USP-6B04
①② represents internal sequential number 1 6
③
2 5
④
3 4
26/27
XC6420
Series
1. The product and product specifications contained herein are subject to change without notice to
improve performance characteristics. Consult us, or our representatives before use, to confirm that
the information in this datasheet is up to date.
2. The information in this datasheet is intended to illustrate the operation and characteristics of our
products. We neither make warranties or representations with respect to the accuracy or
completeness of the information contained in this datasheet nor grant any license to any intellectual
property rights of ours or any third party concerning with the information in this datasheet.
3. Applicable export control laws and regulations should be complied and the procedures required by
such laws and regulations should also be followed, when the product or any information contained in
this datasheet is exported.
4. The product is neither intended nor warranted for use in equipment of systems which require
extremely high levels of quality and/or reliability and/or a malfunction or failure which may cause loss
of human life, bodily injury, serious property damage including but not limited to devices or equipment
used in 1) nuclear facilities, 2) aerospace industry, 3) medical facilities, 4) automobile industry and
other transportation industry and 5) safety devices and safety equipment to control combustions and
explosions. Do not use the product for the above use unless agreed by us in writing in advance.
5. Although we make continuous efforts to improve the quality and reliability of our products;
nevertheless Semiconductors are likely to fail with a certain probability. So in order to prevent
personal injury and/or property damage resulting from such failure, customers are required to
incorporate adequate safety measures in their designs, such as system fail safes, redundancy and
fire prevention features.
7. Please use the product listed in this datasheet within the specified ranges.
9. All rights reserved. No part of this datasheet may be copied or reproduced unless agreed by Torex
Semiconductor Ltd in writing in advance.
27/27