Professional Documents
Culture Documents
Follow us:
TECHNICAL DATA SHEET No 139
CHASSIS COAT
GENERAL TECHNICAL DESCRIPTION SURFACE PRETREATMENT/CLEANING OF SUBSTRATE
1K Alkyd based Primer and Paint in One Clean and sanded metal surfaces Clean substrate using a soft cloth and
Direct to Metal application - no need for such as carbon steel, aluminium and 770 ANTISIL NORMAL / 771 ANTISIL
undercoat or primer underneath galvanised FAST DEGREASER.
High quality, quick drying Make sure the surface is first wiped dry
Excellent anticorrosion protection with Zinc and then air dried.
Phosphate corrosion inhibiting pigment
Zinc Chromate free
Semi gloss finish
PRODUCT APPLICATION: Spray Gun: apply 2 coats. Keep flash off time between coats.
Brush / Roller: apply 1 coat.
Stir well before use Spray Gun Ready to spray: 24 - 34 s Spray gun
Addition 25% 767 NITRO 24-34 DIN 4 / 20°C (68°F) 1.5 - 1.8 mm
THINNER / REDUCER, 750 1.5 - 2 bar (22 - 29 psi)
SYNT THINNER / 2x coat = 80 - 90 micron
REDUCER or WHITE (3.2 - 3.5 mil)
SPIRIT
For increased endurance Brush / Roller 10 min / 23°C (73°F) Air drying
and hardness mix 4 parts Dilute with 0 - 10% 767 Flash off time 5 - 6 h / 23°C (73°F)
CHASSIS COAT with 1 part NITRO THINNER / 30 - 45 min / 23°C (73°F) with 20:80 HARDENER
20:80 HARDENER. Do not REDUCER or 750 SYNT Touch free 24 h / 23°C (73°F)
use thinner. THINNER / REDUCER or without 20:80
Pot Life: > 6 h / 23°C (73°F) WHITE SPIRIT HARDENER
panel temperature
For professional use only. The information displayed on this sheet has been carefully selected through a series of laboratory investigations. It is based on our best
knowledge at the time of issue. The data is given for information purposes only. We are not liable for its correctness, accuracy and completeness. It is up to the user to
check for newer updates or further information if needed for his intended purpose. The intellectual property of this product, trademarks and copyrights is protected.
All rights reserved. The relevant Material Safety Data Sheet and warnings displayed on the label must be read carefully. We may modify and / or discontinue operation
of all or portions of this information at any time in our sole discretion, without any notice and assume no responsibility to update the information. All rules set forth in
this clause shall apply accordingly for any future changes and amendments.
OCTOBER 2021