Professional Documents
Culture Documents
Fast Rectifiers UF4001 - UF4007
Fast Rectifiers UF4001 - UF4007
www.onsemi.com
Fast Rectifiers
UF4001 - UF4007
Features AXIAL LEAD / DO−41
CASE 017AH
Low Forward Voltage Drop
High Surge Current Capability MARKING DIAGRAM
High Reliability
High Current Capability
Glass−Passivated Junction
These are Pb−Free Devices
ÉÉÉ
ÉÉÉ UF400x
ABSOLUTE MAXIMUM RATINGS
(Values are at TA = 25C unless otherwise noted.)
Value
ÉÉÉ $Y&Z&3
UF UF UF UF UF UF UF
Symbol Parameter 4001 4002 4003 4004 4005 4006 4007 Unit
VRRM Maximum 50 100 200 400 600 800 1000 V
Repetitive
Reverse Voltage
UF400x = Specific Device Code
IF(AV) Average 1.0 A x = 1/2/3/4/5/6/7
Rectified
Forward Current $Y = onsemi Logo
.375” Lead &Z = Assembly Plant Code
Length at
TA = 75_C
&3 = 3−Digit Data Code (Year & Week)
IFSM Non−Repetitive 30 A (Color Band Denotes Cathode)
Peak Forward
Surge Current
8.3 ms Single
Half−Sine−Wave ORDERING INFORMATION
TSTG Storage −65 to +150 C
Temperature
Range
Device Package Shipping†
TJ Operating −65 to +150 C UF4001 Axial Lead (DO−41) 5000 /
Junction
(Pb−Free) Tape & Reel
Temperature UF4002
Stresses exceeding those listed in the Maximum Ratings table may damage the UF4003
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected. UF4004
UF4005
THERMAL CHARACTERISTICS UF4006
(Values are at TA = 25C unless otherwise noted.)
UF4007
Symbol Parameter Value Unit
†For information on tape and reel specifications,
PD Power Dissipation 2.08 W
including part orientation and tape sizes, please
RqJA Thermal Resistance, Junction−to−Ambient 60 C/W refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
RqJL Thermal Resistance, Junction−to−Lead 30 C/W
1.6 10
TA = 25C
1.4 Pulse Width = 300 ms
IF, Average Rectified Forward
2% Duty Cycle
1.0 UF4001−UF4003
Current (A)
40 1000
IFSM, Peak Forward Surge Current (A)
30 100
TA = 125C
20 10
10 1
TA = 25C
0 0.1
1 2 5 10 20 50 100 0 20 40 60 80 100 120 140
Number of Cycles at 60 Hz Percent of Rated Peak Reverse Voltage (%)
60
50
CT, Total Capacitance (pF)
40
30
UF4001−UF4003
20
10 UF4004−UF4007
0
0.1 0.2 0.5 1 2 5 10 20 50 100 200 500
VR, Reverse Voltage (V)
www.onsemi.com
2
UF4001 − UF4007
50 W 50 W trr
Noninductive Noninductive
+0.5 A
(−)
(+) DUT
Pulse 0
50 V
Generator
(approx)
(Note 2) −0.25 A
(−)
Oscilloscope (+)
50 W
(Note 1)
Noninductive
NOTES: −1.0 A
1. Rise Time = 7.0 ns max. Input Impedance = 1 MW, 22 pF. Set Time Base for 5/10 ns/cm
2. Rise Time = 10 ns max. Source Impedance = 50 W. 1.0 cm
www.onsemi.com
3
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
5.20
4.06
0.86
0.71
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
DOCUMENT NUMBER: 98AON13444G Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
ADDITIONAL INFORMATION
TECHNICAL PUBLICATIONS: ONLINE SUPPORT: www.onsemi.com/support
Technical Library: www.onsemi.com/design/resources/technical−documentation For additional information, please contact your local Sales Representative at
onsemi Website: www.onsemi.com www.onsemi.com/support/sales