B. Tech (E&C) FOURTH SEMESTER MAY 2018 END SEMESTER EXAMINATION ELECTROMAGNETICS EE 262 Maximum Marks:50 TIME:03 Hrs Note: 1) Attemptany FIVE questions.together otherwise it will not mark. 2) Putboth parts of question 3) Assume suitable missing data, if any.
formulas for attenuation constant, phase shift constant and
1[a] Derive conductor. (5) characteristicimpedance of pure dielectric and pure
Electric field component of uniform plane wave is given by E =4
[b]If V/m. Find out nand time average p0wer Sin (20 T X10 ° t-0.8 x) a, (5) carried by the wave.
boundary conditions. Two homogenous isotopic
2[a] Derive electric For x 0, Er1 = 2, Lr1 3and dielectric mediums meet on plane x =0.magnetic field intensity H= 2i + =3, L,2 =5. A uniform for x< 0, E,2 for x <0. (5) A/m exist for x0. FindH, 3j+ 3k
Derive magnetic boundary conditions. Two homogenous isotopic
[b] y= 0. For y >0, [ =5 and for y<0, dielectric mediums meet on plane uniformelectric flux density D,= 2i+ 3j+ 3k C/m exist for Erz =3. A (5) y>0. Find E, fory <0. with H =Cos (10 ° t- ß z) a, 3[a] In free space (z< 0), aplane wave ([r =2, Lr = 8) in A/m is incident normally on a lossless medium components of field region z > 0. Determine electric and magnetic transmitted and reflected wave. (5)
Ibl Derive formulas of reflection coefficient and transmission
[b| coefficient for oblique incidence of parallel polarized wave. Calculate Brewster angle for (&,i = 1, Hrl =5)and (E2 =3, L2 =2). (5) wave if wave reflected (&rz ==2,2, transmitted and medium first 4{a] Calculate power of to second field in transmitted from free space (first medium) electric incidence and (5) r2 = 5 and o = 0) with normal Bx)a, V/m. medium is E =10 Sin(10 xX 10 t- between distance circuit transmission line. [b] Prove that for open minima is M4. consecutive current maxima and current
formula of VSWR of transmission line. Calculate
5[a] Derive the following lossless transmissiOn reflection coefficient and VSWR of line: = 50 mn and L= 1uH/m, C = 100 pF/m, f=100 MHz, L (Length) (5) ZL= (50+j150) L.
[b] Why impedance matching is required for transmission line? Explain
single stub and doublestub matching techniques of transmission line.(5)
6[a] Prove that for rectangular waveguide wave propagation is possibie
only if f> fc. (5) [b< Derive formula of critical frequency for TEmn mode of rectangular waveguide. Find out all possible modes of (3 x 2) cm rectargular waveguide for 25 GHZ signa (5)