Professional Documents
Culture Documents
Supply
--Supplied in individual packaging containing cabinet, plate and
accessory bag.
Blind plate
--For cabinets with a height of up to 700 mm they are supplied
unassembled inside the packaging.
--For cabinets with a height of up to 800 mm and above they are
supplied assembled.
Accessory bag:
--4 watertight caps (if the wall-mounting cut-out holes are not
used).
--Nut and washer kit for securing the earth wire.
--Plate height adjusters, nuts, washers and drainage caps.
--Key.
--Cable entry lid and fixing screws.
--Assembly instructions.
2 ARGENTA SERIES
IP IP
55 66
Enclosure Door
--Manufactured in cold-rolled steel from a single cross-shaped part. --Possibility of opaque or transparent door with 110° reversible
--Totally reversible cabinet. opening.
--Sheet thickness: --Possibility of double door as of a width of 1000 mm.
1.2 mm for cabinets from 250x200 to 600x500. --Concealed and removal hinges with quick-assembly and
1.5 mm for cabinets from 600x600 to 1400x1000 mm. disassembly pins.
--Wall-mounting by means of four Ø9 mm cut-out holes. --Sheet thickness on opaque doors:
--Wall-mounting support leaving a gap of 11 mm (supplied as an 1.2 mm for cabinets from 250x200 to 600x400 mm.
accessory). 1.5 mm for cabinets from 600x500 to 800x1000 mm.
2 mm for cabinets from 800x1200 to 1400x1000 mm.
--Four M8x25 bolts at the back of the cabinet for securing plates,
adjustment elements or chassis. --Transparent glass door:
4-mm thick tempered glass in cabinets from 300x400 to
--M6x10 earth bolt located on the cabinet wall for joining 1200x1200 mm.
enclosure and door by means of earth wire. 3-mm thick Polycarbonate in cabinets from 250x200 to
--2-mm thick cable entry lid with sealing gasket to guarantee IP 300x300 mm.
protection. --Injected polyurethane sealing gasket to guarantee IP
--Double fold to prevent water from entering the cabinet. protection.
--Drainage hole at the base of the cabinet to prevent --Welded reinforcement profiles with cut-out holes with a
condensation on the inside. separation of 25 mm for fitting accessories.
--Door centring device included in cabinets with a height of
600 mm and greater.
4 ARGENTA SERIES
IP
66
Cabinets supplied with mounting plate. For references without plate, add /SP; e.g.: GN403015/SP.
Pack of 4 plate height adjusters supplied in all references, even in those without plate /SP.
For special cabinets, cabinets without plate, and cabinets with transparent door, check availabiity of UL certificate.
* Calculations obtained according to the CEI 890:1997 standard + Corrigendum 1998; “Method of temperature-rise
assessment by extrapolation for partially type-tested assemblies (PTTA) of low-voltage switchgear and control gear”.
Cabinets supplied with mounting plate. For references without mounting plate, add /SP; e.g.: GN6012030PD/SP.
Pack of 4 plate height adjusters supplied in all references, even in those without plate /SP.
For special cabinets and cabinets without plate, check availability of UL certificate.
* Calculations obtained according to the CEI 890:1997 standard + Corrigendum 1998; “Method of temperature-rise
assessment by extrapolation for partially type-tested assemblies (PTTA) of low-voltage switchgear and control gear”.
.
6 ARGENTA SERIES
IP IP
55 66
4 HOLES 4 HOLES
2 BOLTS M6X10 40 2 BOLTS M6X10
D=9mm D=9mm
4 HOLES 4 BOLTS
M8X25 M8X25 40
20 20
27.5
20
A-5
A
A-5
A
20
20
Head office
Leonardo da Vinci 2
Pol. Ind. Los Huertos
E-50800 Zuera (Zaragoza)
SPAIN