Professional Documents
Culture Documents
2 RS485 Connection
Analog Mode: Control Common PTZ Camera Via RS485 Connection Diagram
眉
Control Output: RS485+ of PTZ camera connect to Ta of joystick controller & RS485 - of PTZ
Camera Connect to Tb of Joystick controller.
瓦~
__"-�-
,;;;_-;.., 产,九 汀�'
...... 之节
勺 凸':' 豆', 吃 '
严
- 9,
一心一·岁丿
Up to 7 cameras
尽一 飞
·-�一,, cJ
(1) Using RS422 bus connection method, the third pin Ra of the joystick controller connect to TXD
IN- of the camera, the fourth pin Rb of the joystick controller connect to TXD IN+ of the camera,
and the fi「st pin Ta of the joystick controller connect to RXD IN- of the camera, the second pin
Tb of the Joystick controller connect to RXD IN- of the camera
-03-
』oystlck Joystick
Camerar Camerar
Controller Controller
R a<;············> TXDIN- RXD <:············> TXD
(l) I Rb�-…········> TXDIN+ (2)
TXD <: …·········>RXD
Ta�············>RXDIN
Tb �············> RXDIN+ GND<: …·········>GND
(2) Using RS232 connection method.The first pin RXD of joystick controller(lOpin terminal) connect
to the Input Interface TXD of camera, the second pin TXD of joystick controller connect to RXD
of camera,the third pin of joystick controller connect to GND of camera{also can use the
standard RS232 interface(DBO) of joystick controlle「to connect the camera.)
VISCA Equipment
Using R5232 cascade connection almost the same as RS422. The output of camera #1 connect to
the input of camera #2 and the output of camera #2 connect to the input of camera #3 and so on:
-04-
Bofo,o ettomptiog to coooect o, ope,ete thl, prod"'!,
Plem ,eed io,trnction, ca,d folly ood "" this mao,al fo, M,ce ,.,
Y06021202014 �'"''"'I"''''"'"俨,w血竺巳竺