You are on page 1of 38

MEDIANAV

ACCESS AND MODIFICATIONS


BY MEANS OF
MICOM MANAGER
MEDIANAV MN1 MN2 MN3
Rev.03

Warning – No liability is assumed for errors or unexpected consequences

The user takes responsibility for its actions

WARNING

Some of the settings of Micom Manager or the pressure of keys whose functionality is unknown, can lead
to a block of the Medianav which cannot be recovered and requires repair by the official network.

Pay close attention to the keys of the Micom Manager that are pressed during the changes.

Pagina 1 di 38
Index
1 Introduction ............................................................................................................................................... 3

2 Identify your model of Medianav .............................................................................................................. 4

3 The access codes ....................................................................................................................................... 7

4 Open the access page in display mode only .............................................................................................. 8

5 Open the login page in edit mode ........................................................................................................... 15

6 Settings for Medianav MN3 – 1.0.15.1 .................................................................................................... 17

7 Settings for Medianav MN3 – 1.0.13.3 .................................................................................................... 22

8 Settings for Medianav MN2 9.1.x ............................................................................................................ 27

9 Settings for Medianav MN2 8.0.0............................................................................................................ 33

10 Settings for Medianav MN1................................................................................................................. 34

11 Credits.................................................................................................................................................. 36

12 Request to contribute.......................................................................................................................... 37

13 Reporting errors or inaccuracies ......................................................................................................... 37

14 Copyright and Rules for publication .................................................................................................... 38

Pagina 2 di 38
1 Introduction

The Medianav is in effect a computer, equipped with its own operating system.

The Micom manager is a setting menu that is hidden to the user and the access to which requires the user
to perform a particular enabling procedure and enter access codes.

From the Micom manager it is possible to make some changes both to the Medianav and to some system
parameters.

In order to make changes to the parameters, it is also necessary to insert a USB memory stick containing an
initialisation file into the Medianav USB socket.

Different models of Medianav exist and the access codes are different.

Therefore, before performing any operation, it is important to know which is the version of your own
Medianav.

Pagina 3 di 38
2 Identify your model of Medianav

Different models of Medianav exist:

- Medianav Standard (indicated as MN1)

- Medianav Evolution (indicated as MN2)

- Medianav Evolution 2 or Smart Evolution (indicated as MN3)

The Medianav Standard (MN1) is the first version of the multimedia system. It is based on a 600 MHz
processor with 0,5 GB RAM and Windows CE operating system. The last official software version is version
4.1.0.

The Medianav Evolution (MN2) is the second version of the multimedia system. It is based on a 667 MHz
processor with 1 GB RAM and Windows CE operating system. The last official software version is version
9.1.3.

The Medianav Evolution 2 or Smart Evolution (MN3) is the third version of the multimedia system. It is
based on a 2 Ghz processor with 2 GB RAM and Linux operating system. MN3 is compatible with Android
Auto and Apple Car Play. The software versions start from release 1.0.XX.Y, and up today, the last software
version is version 1.0.15.1.

Pagina 4 di 38
How to identify your own Medianav model?

The simplest way to identify your own Medianav model is to check the installed software version.

From the main screen, select “Setting” Select the menu “System”

Scroll down to access page 2 Select the menu “System version”

- If the software version is any version identified by the identifying code 4.X.Y or lower, then it is a
Medianav Standard (indicated as MN1)

- If the software version is any version identified by the identifying code between 5.X.Y and 9.X.Y,
then it is a Medianav Evolution (indicated as MN2)

- If the software version is any version identified by the identifying code 1.0.XX.Y or higher, then it is
a Medianav Evolution 2 or Smart Evolution (indicated as come MN3)

Next, a table is reported in which the various software versions of Medianav are presented.

Pagina 5 di 38
Table of Medianav software versions

Medianav Notes List of Most updated


system software available
identification versions version
code

1.X.Y
First version of the system 2.X.Y
MN1 Processor 600 MHz 4.0.3
Standard Memory 0,5 GB RAM 4.0.5
Operating system Windows CE 4.0.6
4.1.0 
5.X.Y
Second version of the system 6.0.3
Processor 667 MHz 6.0.4
MN2 Memory 1 GB RAM 7.0.5
Evolution Operating system Windows CE 8.0.5
9.1.1
9.1.3 
Third version of the system 1.0.12.8
MN3 Processor 2 Ghz 1.0.13.1
Evolution 2 Memory 2 GB RAM 1.0.13.2
(Smart Operating system Linux 1.0.13.3
Evolution) Compatible with Android Auto e Apple Car Play. 1.0.15.1 

NOTE 1: Better still further versions of Medianav exist if one considers the presence of DAB+ tuner, which
was introduced with the special edition Duster Techroad and later only it was extended to all the models

NOTE 2: Medianav MN3 is the version currently installed on new cars and therefore it is the version for
which new official updates will be released. We suggest to refer to Dacia official web site to check if new
updates are available.

Pagina 6 di 38
3 The access codes

Next you can find a table with the access codes corresponding to the various software versions of
Medianav.

Table of access codes for the various software versions of Medianav

Medianav List of software Sub-version Sequence of the access codes to


system versions access the Micom Manager
identification
code

1.X.Y
2.X.Y
MN1 4.0.3 8005 - 3638
Standard 4.0.5 8005 - 3638
4.0.6 8005 - 3638
4.1.0 8005 - 3638
5.X.Y 0362 - 3748
6.0.3 0362 - 3748
6.0.4 0362 - 3748
MN2 7.0.5 0362 - 3748
Evolution 8.0.5 0362 - 3748
9.1.1 2383 - 3748
9.1.3 2383 - 3748
1.0.13.1 .366_r35 8457 – 7777 - 5031 (PASS version)
MN3 1.0.13.1 .366_r36 2895 – 5751 - 9895 (PASS version)
Evolution 2 1.0.13.1 .366_r39 6835 – 9377 - 5822 (PASS version)
(smart 1.0.13.2 .368_r49 4620 - 0688 - 2047 (PASS version)
evolution) 1.0.13.3 .369_r60 9777 - 1757 – 7817 (PASS version)
1.0.15.1 0023 – 3571 - 3365 (PASS version)

Pagina 7 di 38
4 Open the access page in display mode only

To access the Micom manager, you must first open an access page that is not visible during normal use of
the Medianav.

The page opens by performing a sequence of taps on one of the Medianav screens.

Watch a video tutorial or continue reading.

Watch video on our Web site: https://duster4all.wixsite.com/duster4all/medianav-micommanager

Watch original source video: https://www.youtube.com/watch?v=nf4EF_oq0SQ

Pagina 8 di 38
Access the following page:

From the main screen, select “Setting” Select the menu “System”

Scroll down to access page 2 Select the menu “System version”

On the page that displays the software version, press the indicated points from 1 to 5 in the indicated
sequence, that is, first press the point indicated with “1”, then the point indicated with “2”, etc. up to the
point indicated with “5”.

Pagina 9 di 38
In case of difficulties in identifying the pressure points, the following identification mask can be printed and
cut out.

Pagina 10 di 38
A window for entering a code appears on the screen.

Pagina 11 di 38
Using the on-screen keyboard:

- Enter the first code (Note: Refer to the code table to find the correct one for your Medianav
software version)

- Press the OK button

Using the back key " ", delete the previously entered code

Pagina 12 di 38
Using the on-screen keyboard:

- Enter the second code (Note: Refer to the code table to find the correct one for your Medianav
software version)

- Press the OK button

Pagina 13 di 38
The following screen appears:

Pagina 14 di 38
5 Open the login page in edit mode

To access the access page in edit mode, the procedure is the same as described, but before starting it, a
USB memory key containing an enabling file must be inserted into the USB socket of the Medianav.

The enable file is actually an empty file but its presence on the memory stick is required to enable the
editing functionality.

What is really important is the name of the file which is different according to the software versions of the
Medianav:

- File name for the Medianav MN1 version

mcmtest_activate.ini

- File name for Medianav MN2 version

mcmtest_activate_4medianav.ini

- File name for version Medianav MN3

mcmtest_activate.ini

Creating the file is a very simple operation and can be done in an autonomous way.

Pagina 15 di 38
For example from a PC (from MAC the procedure is similar), simply open the system text editor program
"Notepad" or "Note pad", leave the content blank and press "File" "Save as" assigning the name correct for
your Medianav system as reported on the previous page.

Tutorial by Franco Nobile: https://www.facebook.com/franco.nobile.9/videos/10215744130705139/

Copy the file so created into a USB memory stick (max 32 GB) formatted in FAT32 format.

Insert the USB memory stick into the USB socket of the Medianav and repeat the procedure described
above to access the login page.

In the same screen which opens, the “MICOM TEST” key will now be enabled through which get access to
the settings page.

Pagina 16 di 38
6 Settings for Medianav MN3 – 1.0.15.1
WARNING

Some settings of the Micom Manager or the pressure of keys whose functionality is unknown,
can lead to a block of the Medianav which is not recoverable

and requires repair via official network.

Pay close attention to the Micom Manager keys you press while editing.

The following screen corresponds to the MICOM TEST page for Medianav MN3 1.0.15.1

The “Hard reset” button is used to store the changes which are made

WARNING: do not press the “Make Virgin” button which irreversibly resets the Medianav.

Sending of
changes
which are
made

Pagina 17 di 38
[WARNING: NOT KNOWN HOW Rear cameras activation Rear camera guidelines selection
TO EDIT] OFF: not activated !!! To check !!!
DAB+ radio source selection RVC: Rear view camera $ 17 RVC Single camera
MVC: Multiview camera $ 18 MVC Multi view camera

TMC (Traffic DAB COL


Message Channel) DAB radio antenna Choice of graphic
traffic information (P) passive interface
service (A) active M0 Dacia
M1 Renault

[WARNING: NOT KNOWN HOW TO EDIT]

SND Volume of parking sensors DAB


HMI Obstacle detection on template. DAB digital radio
SPK activation (DAB
You can set only R or F/R. The car speakers module required
follow the sensors: obstacle behind on the right, inside Medianav)
only the rear right speaker plays

RAD FM radio antenna


(P) passive
(A) active

Pagina 18 di 38
Choosing the boot logo
To make the change:
- use the arrows to select the logo (Dacia / Renault /
others) AIR
ENG (BVM)
- press the central button on which the choice made Automatic climate
Manual or
appears (for example, in the case of the figure, "Dacia" status info on the
automatic
- Confirm the changes with “Hard reset” medianav display
gearbox

ECO CP AA TEMP
RES
Activation of ECO CARPLAY ANDROID AUTO External
Remote Engine
functionality. On / Off On / Off temperature
Start.
Displays a visualization
Engine start with
dedicated button on medianav
SPVR(C) timer [only for cold
instead of the Off / °C / °F
SIRI countries]
"maps" [additional
control unit is On / Off
ADAC
required which is
On-board computer: km/l or
not present on all
l/100km display
car versions]
TO BE VERIFIED
BOSE LDSN IT DOES NOT WORK ON MN2
Bose system Loudness in the Parameters can be changed
function activation. audio menu with OBD2 socket and
Need Bose amplifier DDT4ALL software
to be installed

Pagina 19 di 38
SPEED PTT
MW e LW
UNKNOWN Push To Talk
Radio spectrum
FUNCTION Activation of the
[WARINING: NOT
[WARINING: button on the steering
KNOWN HOW TO
NOT KNOWN wheel for voice
EDIT]
HOW TO EDIT] control

4WD ECALL SWRC Rear


Activation of Emergency call. Requires Setting the type speakers
Info 4X4 page GSM module (does not of Medianav
work with smartphone steering wheel Front
connection) controls Tweeter

GPS Rear
WAKE
Global Tweeter
Selection of Medianav behavior at
Positioning
startup
System
AC: switch on with radio
ON/OFF
ON: switch on with clock
OFF: switch on with last used
function

Pagina 20 di 38
ACC, IGN : RGD ILL
[WARINING: NOT [WARINING: NOT [WARINING: NOT
KNOWN HOW TO EDIT] KNOWN HOW TO EDIT] KNOWN HOW TO EDIT]
position of the ignition Illumination status Priority
key

DRIVE AHA
Loudspeaker for the Multimedia function
hands-free system connected with smartphone
(L) left and AHA app installed
(R) real For listening and managing
(B) bilateral Internet radio, podcasts, music,
audiobooks from smartphones

MAP CODE
[WARNING: NOT KNOWN CTN $00
HOW TO EDIT] [WARNING: NOT
Navigator map license KNOWN HOW TO EDIT]
Country for FM radio
tuning

Pagina 21 di 38
7 Settings for Medianav MN3 – 1.0.13.3
WARNING

Some settings of the Micom Manager or the pressure of keys whose functionality is unknown,
can lead to a block of the Medianav which is not recoverable

and requires repair via official network.

Pay close attention to the Micom Manager keys you press while editing.

The following screen corresponds to the MICOM TEST page for Medianav MN3 1.0.13.x

The “Hard reset” button is used to store the changes which are made

WARNING: do not press the “Make Virgin” button which irreversibly resets the Medianav.

Sending of
changes
which are
made

Pagina 22 di 38
[WARNING: NOT KNOWN HOW TO EDIT]

SND Volume of parking sensors


COL
Choice of graphic
HMI Obstacle detection on template.
TMC (Traffic interface
Message Channel) M0 Dacia
SPK
traffic information M1 Renault
You can set only R or F/R. The car speakers
service
follow the sensors: obstacle behind on the right,
only the rear right speaker plays

MUTE
Parking sensor buzzer deactivation

DAB+ radio source


selection

Rear camera guidelines selection $00


[WARNING: NOT
!!! To check !!! Rear cameras activation
KNOWN HOW TO EDIT]
$ 17 RVC Single camera OFF: not activated
Country for radio tuning
$ 18 MVC Multi view camera RVC: Rear view camera
MVC: Multiview camera

Pagina 23 di 38
CP AA SIRI
CARPLAY ANDROID AUTO On / Off
On / Off On / Off

ADAC
AIR ENG (BVM)
On-board computer:
Automatic climate Manual or Choosing the boot logo
km/l or l/100km
status info on the automatic To make the change:
display
medianav display gearbox - use the arrows to select the
logo (Dacia / Renault /
TO BE VERIFIED
others)
IT DOES NOT WORK
- press the central button on
ON MN2
which the choice made
Parameters can be
appears (for example, in
changed with OBD2
the case of the figure,
socket and DDT4ALL
"Dacia"
software
- Confirm the changes with
TEMP “Hard reset”
External temperature
visualization on
medianav
Off / °C / °F

Pagina 24 di 38
ECO LHD / RHD LDSN
Activation of ECO functionality. Displays LHD: Left hand drive Loudness in the
a dedicated button instead of the steering wheel audio menu
"maps" [additional control unit is RHD: Right hand
required which is not present on all car drive steering wheel
versions]

SPEED UNKNOWN Wideband


FUNCTION [WARINING:
[WARINING: NOT NOT KNOWN
KNOWN HOW TO HOW TO EDIT]
EDIT]

MW e LW
ECALL SWRC
Radio spectrum
Emergency call. Requires Setting the type
[WARINING: NOT
GSM module (does not of Medianav
KNOWN HOW TO
work with smartphone steering wheel
EDIT]
connection) controls

DAB DAB
RAD DAB radio antenna DAB digital radio
FM radio (P) passive activation (DAB
antenna (A) active module required
(P) passive inside Medianav)
(A) active

Pagina 25 di 38
GPS PTT
Global Rear Rear Push To Talk 4WD
Positioning speakers Tweeter Activation of the Activation of
System button on the Info 4X4 page
ON/OFF Front steering wheel for
Tweeter voice control

RES
Remote Engine
Start.
Engine start with BOSE
timer [only for cold Bose system
countries] function activation.
Need Bose amplifier
to be installed
AHA
Multimedia function connected with smartphone
WAKE
and AHA app installed
Selection of Medianav behavior at
For listening and managing Internet radio,
startup
podcasts, music, audiobooks from smartphones
AC: switch on with radio
ON: switch on with clock
OFF: switch on with last used
function

Pagina 26 di 38
8 Settings for Medianav MN2 9.1.x

WARNING

Some settings of the Micom Manager or the pressure of keys whose functionality is unknown,
can lead to a block of the Medianav which is not recoverable

and requires repair via official network.

Pay close attention to the Micom Manager keys you press while editing.

The following screen corresponds to the MICOM TEST page for Medianav MN2 9.1.x

The “DSI_Config” button is used to store the changes which are made

WARNING: do not press the “Clear Virgin” button which irreversibly resets the Medianav.

Sending of
changes
which are
made

Pagina 27 di 38
Steering wheel controls:
RVC_SWRC # 2 (2A)
Steering wheel controls, second type (square)
RVC_SWRC # 1 (2A)
Steering wheel controls, first type (rounded)

Choosing the boot logo TMC (Traffic [ATTENTION: NOT KNOWN HOW TO
To make the change: Message Channel) EDIT]
- use the arrows to select the traffic information
logo (Dacia / Renault / service SND Volume of parking sensors
others)
- press the central button on HMI Obstacle detection on template.
which the choice made COL
appears (for example, in Choice of graphic SPK
the case of the figure, interface You can set only R or F/R. The car
"Dacia" M0 Dacia speakers follow the sensors: obstacle
- Confirm the changes with M1 Renault behind on the right, only the rear right
DSI_Config speaker plays

MUTE
Parking sensor buzzer deactivation

Pagina 28 di 38
Third line (FM Radio Country) [WARNING: NOT KNOWN HOW TO EDIT]
ULC2.0 Selection Medianav/R-Link
M0 WEU Configuration Dacia, Western Europe M0 EEU Configuration Dacia, Eastern Europe
M0 AMR Configuration Dacia, America M0 OTH Configuration Dacia, Other countries
MI WEU Configuration Renault, Western Europe MI EEU Configuration Renault, Eastern Europe
MI AMR Configuration Renault, America MI OTH Configuration Renault, Other countries
X87 WEU Renault Captur, Western Europe X87 EEU Renault Captur, Eastern Europe
X87 AMR Renault Captur, America X87 OTH Renault Captur, Other countries

Fourth line (DAB Radio Country) [WARNING: NOT KNOWN HOW TO EDIT]
281157368R Renault reference code to indicate MediaNav Evolution

M0_WEU (+DAB) Medianav Dacia Western Europe frequencies


M0_EEU (+DAB) Medianav Dacia Eastern Europe frequencies
MI_WEU (+DAB) Medianav Renault Western Europe frequencies
MI_EEU (+DAB) Medianav Renault Eastern Europe frequencies
X87_WEU (+DAB) Renault Captur Western Europe frequencies
X87_EEU (+DAB) Renault Captur Eastern Europe frequencies
M0_OTH (+DAB) Medianav Dacia Other countries frequencies
MI_OTH (+DAB) Medianav Renault Other countries frequencies
X87_OTH (+DAB) Renault Captur Other countries frequencies

Pagina 29 di 38
(Rear camera guide lines) [WARNING: NOT KNOWN HOW TO EDIT]
Fifth line
$00 None without guide lines $01 X87 Renault Captur $02 B98 Renault Clio IV
$03 K98 Renault Clio IV Sporter $03 H79 Dacia Duster $05 X87 2 Renault Captur
$06 B98 2 Renault Clio IV $07 K98 2 Renault Clio IV Sporter $08 HHA Renault Grand Captur
$09 X92 Dacia Logan $0A BGA Renault Megane $0B HGA Renault Kadjar
$0C X67 Renault Kangoo $0D X52 1 Dacia Logan

Sixth line
$0E X52Ph2_1 Dacia Logan $0E X52Ph2_2 Dacia Logan $0E X52Ph2_3 Dacia Logan
$0E X52Ph2_4 Dacia Logan $0E X52Ph2_5 Dacia Logan $13 X62 Renault Master
$14 X82 Renault Traffic III $15 X82Ph2 Renault Traffic III $16 XBB Renault Kwid
$17 RVC Single rear camera $18 MVC Multiview camera system

MAP_CODE
[WARNING: NOT
KNOWN HOW TO
EDIT]

Code of the maps


in use

Pagina 30 di 38
ADAC TEMP ENG (BVM) ECO
On-board External temperature Manual or Activation of ECO functionality.
computer: km/l or visualization on automatic Displays a dedicated button instead of
l/100km display medianav gearbox the "maps" [additional control unit is
Off / °C / °F required which is not present on all
IT DOES NOT WORK car versions]
Parameters can be AIR LHD / RHD LDSN
changed with OBD2 Automatic climate status LHD: Left hand drive Loudness in
socket and info on the medianav steering wheel the audio
DDT4ALL software display RHD: Right hand menu
drive steering wheel

RES BOSE
Remote Engine Bose system
Start. function activation.
Engine start with Need Bose amplifier
timer [only for cold to be installed
countries]
WAKE
AHA Selection of Medianav behavior at
Multimedia function connected with smartphone startup
and AHA app installed AC: switch on with radio
For listening and managing Internet radio, ON: switch on with clock
podcasts, music, audiobooks from smartphones OFF: switch on with last used
function

Pagina 31 di 38
SPEED UNKNOWN
Rear cameras activation GPS
FUNCTION
OFF: not activated Global Positioning System
[WARNING: NOT
RVC: Rear view camera ON/OFF
KNOWN HOW TO
MVC: Multiview camera
EDIT]

MW e LW
ECALL
Radio spectrum Rear Rear
Emergency call. Requires
[WARNING: speakers Tweeter
GSM module (does not
NOT KNOWN
work with smartphone
HOW TO EDIT] Front
connection)
Tweeter

MIC SWRC PTT


External Setting the type Push To Talk
microphone (on the of Medianav Activation of the button on the
ceiling) steering wheel steering wheel for voice control
controls
DAB DAB 4WD
RAD DAB radio antenna DAB digital radio Activation of Info
FM radio antenna (P) passive activation (DAB 4X4 page
(P) passive (A) active module required
(A) active inside Medianav)

Pagina 32 di 38
9 Settings for Medianav MN2 8.0.0

WARNING

Some settings of the Micom Manager or the pressure of keys whose functionality is unknown,
can lead to a block of the Medianav which is not recoverable

and requires repair via official network.

Pay close attention to the Micom Manager keys you press while editing.

The following screen corresponds to the MICOM TEST page for Medianav MN2 8.0.0

The “DSI_Config” button is used to store the changes which are made

WARNING: do not press the “Clear Virgin” button which irreversibly resets the Medianav.

Sending of
We suggest to upgrade the system to the most recent
changes
software version of Medianav 9.1.3 and refer to the
which are
relative section.
made

Pagina 33 di 38
10 Settings for Medianav MN1

WARNING

Some settings of the Micom Manager or the pressure of keys whose functionality is unknown,
can lead to a block of the Medianav which is not recoverable

and requires repair via official network.

Pay close attention to the Micom Manager keys you press while editing.

The following screen corresponds to the MICOM TEST page for Medianav MN1

The “DSI Config” button is used to store the changes which are made

WARNING: do not press the “Make Virgin” button which irreversibly resets the Medianav.

Pagina 34 di 38
ULC R-link/MediaNav – system version

EU = Europe

SA = South America

OTH = Other (other countries)

X87 = Renault Captur

M0 = Dacia interface

M1 = Renault interface

RVC = Reverse Video Camera

SWRC # 1 = type 1 steering wheel controls – rounded type

SWRC # 2 = type 2 steering wheel controls – squared type

X87 = Renault Captur

B98 = renault Clio IV

K98 = renault Clio IV Sporter

LHD = Left Hand Drive

RHD = Righ Hand Drive

ADAC = On-board computer: km/l or l/100km display

TEMP = External temperature visualization °C or °F

AIR = Manual / Automatic climate

ENG = Manual or automatic gearbox

Pagina 35 di 38
11 Credits

The information collected in this document derives from a research and collection of material on the WEB,
for which we thank:

- Franco Nobile for the tutorial for creation of .ini files

https://www.facebook.com/franco.nobile.9/videos/10215744130705139/

- Forum - Software di Navigazione Mappe per PPC-PNA-Autoradio

https://www.mobimart.it/showthread.php?4492764-Micom-Manager-men%F9-segreto-
MediaNav-Evolution

- Mondo Duster

http://www.mondoduster.it/2017/09/richiamare-micom-manager-medianav-evolution-8-0-5-
aggiornato-9-1-1/

- Lisandru

https://lisandru.eu/automotive/renault-dacia-medianav-tips/how-to-use-micom-manager-hidden-
manager-to-medianav-evolution-8-0-5-9-1-x-10-0-xx-x.html

- Forum Clio

https://lamiaclio.forumcommunity.net

- Forum M’sieurlolo https://msieurlolo.fr

- dacianer

https://www.dacianer.de/resources/medianav-evolution-micom-test-menue-zugriffscodes-
einstellungen.85/

Pagina 36 di 38
12 Request to contribute

Dacia Duster Free Forum is a community that runs thanks to the sharing of experiences and information
among users.

If:

- You are interested in giving a contribution to users based on your experience

- You have suggestions or ideas to provide

- You have particular skills to make available for the group

you can write to:

daciaduster.freeforum@gmail.com

13 Reporting errors or inaccuracies

If you find errors or inaccuracies or even simply believe that some passages could be expressed in a clearer
way or with the insertion of illustrative images, you can write to:

daciaduster.freeforum@gmail.com

preferably indicating:

- the name of this file and the title of this guide

- passages containing errors or inaccuracies or passages that you think are unclear

- suggestion of amendment

Thankyou in advance for your collaboration.

Pagina 37 di 38
14 Copyright and Rules for publication

The author of this document, on behalf of DACIA DUSTER FREE FORUM, makes it available for information
purposes only and free of charge and does not derive any benefit from making this document available.

Some information, photos, tables contained in this document are derived from material present on the
WEB which is believed to be freely distributed and, where indicated, the source is cited as far as the author
as identified on the WEB.

Unless otherwise indicated, the reproduced images are made or re-elaborated by the author.

The rights of the images not created or re-elaborated by the author belong to their respective owners. In
the event of a dispute, it is possible to request its removal writing to: daciaduster.freeforum@gmail.com

This document is distributed under the following conditions:

NOTE: for the purposes of the license to use the work, possible distribution for information purpose is
allowed for sale networks, dealers or any entity carrying out a commercial economic activity for profit,
provided that the purpose of distribution is for information and the copy is not is sold.

Pagina 38 di 38

You might also like