Professional Documents
Culture Documents
2020
valid from 1.1.2020. valid for orders received before 31.12.2020, last delivery no later than 28.02.2021
SALES MANUAL 2020
Welcome to ALNO
Many of the innovations and changes in the current range are based on your ideas and suggestions.
Thank you again for your support and suggestions.
Yours sincerely,
02
NEW FEATURES 2020
No. 475/475 No. 479/479 No. 480/480 No. 481/481 No. 482/482
fango * Manhattan grey Katthult pine-effect oak effect cashmere grey Sanremo oak effect
(end-grained wood edge) (end-grained wood edge) (synchronous pore,
horizontal wood grain vertical wood grain end-grained wood edge)
horizontal wood grain
No. 476/476 No. 503/503 No. 465/465 No. 470/470 No. 471/471
ultra white super matt ultra white super matt white super matt * light grey super matt * fango super matt *
edge in natural oak heartwood look edge dark grey metallic
(end-grained wood edge) *
No. 509 No. 510 No. 511 No. 512 No. 513
high-gloss white high-gloss light grey high-gloss champagne metallic high-gloss graphite metallic high-gloss black
frame black matt frame black matt frame black matt frame black matt frame black matt
05
NEW FEATURES 2020
Country-house antico,
colour for glass units
stylish cornices K 10
Carcase front edge,
cornices K 90
Plinth panels
Colour code
Top panels
Shelf units
Edition Fly
16
42 16
Material thickness (mm) No. 16 16 16 16 10 25 16 16
54 32
50
Laminate fango * 180 ● ● ● ● ● ● ●
Shelf units
■ Worktop finishes
No. 657
elm effect caramel
■ Colour matrix worktop finishes Niche back panels, corner back panels,
Modular panels, shelves, cover panels
Worktops PS, PA
Desk worktops
Colour code
Colour code
Desk panels
ALNOCERA / ALNOSTAR CERA kitchens can be perfectly coordinated in every last detail and planned for a tone-in-tone look with worktops and niche
back panels made of ceramic.
Ceramic material is ideal for kitchens. The elegant yet simple ambience permits an almost unlimited variety of planning options.
This exclusive range is available for worktops, niche back panels and modular panels.
The worktops are available in lengths of up to 3200 mm and in depths of 1200 mm. This makes it possible to plan spacious islands without any joint.
With thicknesses of 18 or 40 mm, kitchens can be created in a look ranging from minimalist and filigree to accentuated and chunky.
Using modular panels of the same thickness, it is possible to include modular panels in the same thickness as any worktop.
We offer an interesting selection of matching accessories for our elegant inset sinks. Sinks can be mounted flush with the worktop or built under.
09
NEW FEATURES 2020
■ Assisted opening
The finger pull for the storage units and for the pocket doors can be selected as opening assistance
in the planning system.
10
■ Handles
No. 310 w/s/m No. 311 w/s/m No. 312 w/s/m No. 313 w/s/m
metal D-handle, black metal D-handle, aluminium black metal D-handle in titanium look metal D-handle, brass
depth 27 mm, drill-hole distance 160 mm depth 35 mm, drill-hole distance 160 mm depth 30 mm, drill-hole distance 160 mm depth 37 mm, drill-hole distance 160 mm
not suitable for glass/ceramic fronts suitable for glass/ceramic fronts suitable for glass/ceramic fronts suitable for glass/ceramic fronts
no surcharge surcharge surcharge surcharge
■ Handle matrix
D-handles Knobs Rail handles Strip handles
Drilling distance 64 96 128 160 192 184 / 384 270 275
Range Handle position w m w S m w S m w S m w S m w* s* w w w
ALNOGRAND ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
No. 489 carbon oak effect (end-grained wood edge), vertical wood decor grain G623 graphite textured
No. 491 carbon oak effect (end-grained wood edge), horizontal wood decor grain G623 graphite textured
PG 2 398 ALNOSTAR DUR
11
NEW FEATURES 2020
■ Units
■ The pocket doors in 208 mm height are park in the side pockets when open. This provides
full access to the tall units fitted behind them, or to a work area with base and wall units.
The parked doors are then not in the way. The uninterrupted pocket doors are available in the
ALNOPLAN, ALNODUR, ALNOFINE, ALNOSUND, ALNOSIGN, ALNOGRAND, ALNOCLASS and
ALNOSTRUCT ranges.
The vertical finger pull from the bottom to the top of the front can be chosen in stainless-steel
effect or aluminium black to provide opening assistance. The visible interior surfaces and the
side end panels are available in all modular-panel colours.
The pocket doors require 120 mm more depth. This produces a planning dimension of
1417 mm for the option with tall units, with a planning dimension of 1392 mm being
required for the open version for base and wall units.
■ Base and tall units for provisions. ■ Glass display unit VGN 45130 and wall unit ■ Metal frame shelf wall unit can be varied
With swivel basket and adjustable baskets OGN 45130 with smokes glass and frame in size
as well as organiser set behind front and in black.
■ Metal frame shelf top unit can be varied in
shorter shelves in 41 mm depth.
size to a width of 1200 mm and depth of
650 mm
■ Base-unit shelf with 3 drawers in Elite in all ■ Sink base units also in 45 mm and 50 mm ■ Sink base unit with deep drawer in
shelf colours. width as well as deep drawer shortened by STARLINE
Widths: 600 and 900 mm 50 mm to a nominal length of 450.
12
■ Units
Upward-folding and Softlift units as well as flap-door units are available in further widths. In addition:
■ Softlift units in 780 mm carcase height ■ Flap doors in 520 mm carcase height ■ Wall units with upward lifting door fitting
Laundry room
■ Support base for washing machine with ■ Tall units with dirty laundry baskets at the ■ Base units with dirty laundry baskets on
pull-out shelf as well as anti-slip mat bottom with pull-out shelves pull-out shelves
■ Pull-out shelf to adding to base/tall units ■ Vertical light slot for glass wall units, display ■ Tall units for built-in appliances with
behind hinged doors with 155° hinges. units and wall as well as base-unit shelves. 3-grid deep drawer for better plannability.
Slots in the left and right-hand side of the
unit for subtle background lighting.
13
NEW FEATURES 2020
■ Units
■ Tall units for provisions: ■ Tall units for ovens: ■ Tall units for refrigerators:
with deep drawers at the bottom with internal drawers and deep drawers with internal drawers and deep drawers
at the bottom at the bottom
14
■ Technical change
■ Ribbed glass doors available in all ■ Smoke glass No. 538 for neutral glass doors is automatically framed in black.
ALNOSTRUCT colours: Frosted glass No. 535 for neutral glass doors will continue to be produced with frame
- natural antique oak in stainless-steel effect.
- red-brown antique oak
1
6
4
3
2
■ Wall units with spices are fitted with a ■ Carcase material and niche back panels: ■ Module concept with reconfigured and
narrower spice rack. vertically and horizontally textured versions extended functions for tall units.
now separated from each other with new
item designations to plan and illustrate Perfectly fitting appliances and variable
them better as well as to differentiate height modus and extremely easy handling
between maximum dimensions. at no extra charge.
■ Depending on front finish, the front material
is also available in large dimensions.
15
NEW FEATURES 2020
■ Technical change
■ Tall-unit doors on larder units must now be ■ Wall units can be ordered with Servodrive for a surcharge.
opened separately. There is no longer any Upward-folding and Softlift units can be provided with Servodrive electric opening assistance
visible dowelling and it is easier to access with the MP SERVO HL surcharge item.
items in the part of the unit in which they
are stored.
■ Storage unit SE 120.. also available with ■ In future, glass niches will be without sup- ■ Cabinet back panels in anthracite grey now
interior in anthracite grey. port panel, making them only 6 mm thick. also lacquered on both sides for highly
By way of option, a 10 mm support panel demanding climates.
in white or anthracite grey can also be
ordered.
16
■ Accessories – interior design
Further accessories in black to give the kitchen an overall look of harmony.
■ Built-in halogen spotlight ■ Socket element ■ Worktop ventilation grille ■ Plinth ventilation louver
■ Cross divider for Elite ■ Cutlery tray for drawers with ■ Cover panel for waste-sorting ■ Laundry basket in white
low side profile system in 60 mm and 90 mm
width
■ Towel holder in anthracite grey ■ Award-winning Franke inset sink and further inset sinks ■ Various Franke single-lever
mixer taps
17
Final deadline for deliveries 31.07.2020;
■ Glass finish
No. 505
ALNOART frosted glass with
aluminium-coloured frame effect
■ Worktops
Desk worktops
Colour code
Colour code
Desk panels
18
Final deadline for deliveries 31.07.2020;
(last order 31.05.2020. Longer delivery times
are possible but only while stocks last)
19
Final deadline for deliveries 31.07.2020;
■ Handles
No. 156 w/s/m No. 189 w/s/m No. 190 m No. 224 w/s/m
metal D-handle metal D-handle metal D-handle metal D-handle
matt nickel effect stainless steel-effect stainless steel-effect stainless steel-effect
depth 30 mm, drill-hole distance 192 mm depth 35 mm, drill-hole distance 128 mm depth 35 mm, drill-hole distance 192 mm depth 30 mm, drill-hole distance 160 mm
No. 225 w/s/m No. 226 m No. 231 w/s/m No. 237 w/s/m
metal D-handle metal D-handle metal D-handle metal D-handle
black chrome effect black chrome effect stainless steel-effect used Look
depth 30 mm, drill-hole distance 160 mm depth 30 mm, drill-hole distance 320 mm depth 26 mm, drill-hole distance 160 mm depth 31 mm, drill-hole distance 160 mm
No. 293 w/s/m No. 294 w/s/m No. 295 m No. 296 m
metal D-handle from Privileg exclusive range metal D-handle from Privileg exclusive range metal D-handle from Bauknecht metal D-handle from Bauknecht
stainless-steel effect stainless steel-effect exclusive range exclusive range
depth 40 mm, drill-hole distance 320 mm depth 40 mm, drill-hole distance 160 mm stainless steel-effect stainless-steel effect
depth 40 mm, drill-hole distance 320 mm depth 40 mm, drill-hole distance 160 mm
20
ALNO – YOUR KITCHEN BRAND
The company’s history begins in 1927 with the joinery set up by The kitchens “Made in Germany” soon became popular internationally
Albert Nothdurft. Just a few years saw the wood-working business too. This is why, in 1969, ALNO started to expand into other European
turn into a successful furniture producer. countries, and later on even world-wide.
In 1958, Albert Nothdurft took the bold step from being a trade business to Since 2018, production has been continued at the Pfullendorf site by the
becoming an industrial undertaking – ALNO Möbelwerke GmbH + Co. KG Neue Alno GmbH.
in Pfullendorf. The ground had been prepared for practical innovations,
first-class quality and award-winning design. But this wasn’t only to the
delight of consumers in Germany.
21
INNOVATION & EXPERTISE
Ceramic fronts
ALNOCERA – extremely high-quality material
in the ALNO front portfolio.
Glass fronts
ALNOVETRINA / SATINA – glass fronts with
unique edge finish.
Design competence
MARECUCINA – ALNO‘s “flagship”.
ALNOATTRACT
Blend of forms and colours of different styles.
Tried and tested materials such as oak,
black glass and metal meet.
22
ALNO DESIGN
■ Kitchen excellence
Good ideas, attractive design and functional solutions – these are the characteristic features of a brand. ALNO not only leads the market but the award
statistics too. See for yourself how much ALNO has achieved in just the past few years.
23
ALNO DESIGN
■ Kitchen excellence
ALNOSTAR CERA
24
ALNO DESIGN / QUALITY
■ Kitchen excellence
ALNOSIGN
The ALNO range is so broad that even the most exclusive of requests
can be fulfilled. Future-oriented ALNO kitchen technology is protected by
various design rights and patents.
ALNO branded kitchens stand for high quality and exceptional dura-
bility. This is where it is all about first-class material, craftsmanship and,
above all, precision. For example: bottom panels in units are tested for
bending strength. Fittings undergo tough endurance tests. Surfaces must
withstand abrasion tests and prove their resistance to chemicals.
Only those parts which pass all tests can be used in production.
From the product idea to developing it for production and from order ALNO branded kitchens may only be fitted by properly trained personnel.
processing to production and assembly, the ALNO QM system assures Fitting them is based on the ALNO installation manual.
the standards that our customers can rightly expect from an interna-
tional kitchen brand. Our customers benefit from our seamless testing All our materials and components undergo an extensive programme of
and inspection process which ensures that only perfect products leave laboratory testing. The GS mark awarded by TÜV Rheinland LGA Products
the factory. To ensure that this also continues to apply in future, ALNO is GmbH means maximum safety and reliability for our customers.
regularly audited and certified by an independent test agency.
For this reason, ALNO has followed a comprehensive quality manage-
ment system since 1995.
25
QUALITY
26
PRODUCT INFORMATION
■ Range lines
ALNO provides creative flexibility for a wealth of options. Two different base unit heights in 2 forms define 4 lines:
A78 Carcase height 780 mm with handle S78 Carcase height 780 mm STARLINE
A72 Carcase height 715 mm with handle S72 Carcase height 715 mm STARLINE
■ The 780 mm carcase height provides storage space with a perfect look based on the 130 mm height level. Tall units with front layout matched to
the lines of the base units create a look of harmony.
■ Many individually tailored solutions for many different applications can be configured with the 715 mm carcase height. This height is ideal for old
properties with dado heights of 860 mm. As a rule, the lower deep drawer / door is shortened by half a height level in comparison to the height of
780 mm. Tall units with matching door reveal are identified with the item suffix “M” (e.g SU 88 2A 195 M).
■ Extensive additional elements and accessories are available for all 4 lines. The niche can also be perfectly planned with variable niche back
panels. When using 40 mm thick worktops, the base unit height of 715 mm produces a niche height of 545 mm. With a base unit height of 780,
the niche is 480 mm high.
A78 Carcase height 780 mm A72 Carcase height 715 mm S78 Carcase height 780 mm STARLINE S72 Carcase height 715 mm STARLINE
with handle with handle
■ The range lines are highlighted in all sections throughout the sales manual:
“A” stands for units with handles and “S” for STARLINE without handles.
■ The two carcase heights 780 mm and 715 mm are represented by the numbers “78” and “72”. Orientation is made even easier by colour markings
in the range summaries and in the sections. In the case of wall and tall units, the abbreviations draw attention to units compatible with the range
lines.
■ Base units and tall units with different carcase heights should not be planned directly side by side. The lines of deep drawers and doors would no
longer be aligned.
■ All 4 lines are available at all times in the kitchen planning data.
27
PRODUCT INFORMATION
28
■ ELITE planning and ordering information
■ The high-end drawer and deep drawer system in anthracite grey creates an elegant new
effect.
■ The load capacity can be up to 40 kg per drawer or deep drawer (incl. drawer weight).
From a width of 800 mm and a depth of 710 mm, the load capacity is 70 kg.
■ The various interior designs can be ordered for any unit height and range.
Items can also be chosen in any carcase colour.
■ Most carcase colours are white on the inside. With anthracite grey, the inside colour is also ■ The freely combinable Elite waste sepa-
anthracite grey. This can enhance the exclusivity of the interior design. ration system can also be used with the
ALPHA and PREMIUM interior design.
■ As well as the drawer and deep drawer options for the interior design, we also offer other
high-quality fitting options in anthracite grey. ■ The suspended waste separation system
This includes pull-out and other larder units or corner units with Arena shelves and an elegant and SPAM603.. may be chosen regardless
band rail. of the selected interior design.
Even the cover caps of the upward folding, Softlift and other units are adjusted to the dark
interior.
29
PRODUCT INFORMATION
30
■ Carcase
■ Visible carcase sides are finished in the ■ A laminate finish comes as standard; gloss laminate, veneer and lacquer are available at extra
specified carcase colour. charge. Concealed carcase sides are finished to match the carcase.
■ The tops and undersides of the wall units ■ White and anthracite grey cabinet back panels are lacquered on both sides for highly demanding
are colour coordinated to match the carcase climates.
colour, giving all visible surfaces in the
kitchen a uniform appearance.
31
PRODUCT INFORMATION
Adjustment facilities
■ Easy adjustment of the wall unit
is possible in 3 directions.
■ Plinth system
■ In addition to 5 standard plinth heights ■ The plinth panels are also protected by pre-fitted sealing profiles on the edge that is in contact
(105, 130, 155, 180 and 205 mm), custom with the floor.
plinth heights between 50 and 205 mm are
■ Corner and connection profiles are filigree and in matching colours.
also available for a surcharge.
■ The clips ensure a precise fit and firm support.
■ From a height of 80 mm, an adjusting
screw can be used to adjust the height ■ Installation and dismantling is quick and easy.
from +25 mm to -10 mm.
■ Load capacity: 50 kg/plinth foot (including
weight of unit).
32
■ Drawers and deep drawers
Drawer frame system Adjustability and interior design
■ All ALNO drawers and deep drawers are equipped with full-extension ■ All drawers and deep drawers can easily be adjusted in 3 directions.
runners. The adjusting elements are easily accessible on the outside of the
frame. The points are neatly finished off with a cap bearing the
■ The high-quality drawer frame system guarantees silent and effort-
ALNO logo.
less operation as well as maximum load capacity, as proven in con-
tinual tests. ■ If necessary a drawer front can be exchanged with little effort.
■ All drawers and deep drawers also feature a Servosoft closing system. ■ The ALNO drawer frame is
designed so that the frame
■ Base units with drawers and deep drawers are available in the three
profile encloses the anthracite
carcase depths 410, 560 and 710 mm.
grey base.
■ System load capacity incl. net weight: (carcase depth 560 mm)
■ The rounded edges make
ALPHA / PREMIUM ELITE cleaning easy and ensure
Drawers 30 kg 40 kg optimum hygiene.
Deep drawers 30 kg 40 kg
Deep drawers > 600 mm 50 kg
Deep drawers > 800 mm 70 kg
Deep drawers >1000 mm 65 kg
33
PRODUCT INFORMATION
■ Base unit with larder pull-out in ■ 150 mm wide base units with deep drawers in anthracite grey for bottles or baking trays
anthracite grey
■ Tall unit for provisions with swivel basket ■ Base unit for provisions with swivel basket ■ Base unit shelf with 3 drawers
and shortened shelves
34
■ iMove wall unit
The iMove fitting permits easy and convenient access to the upper shelves in wall units. The shelf moves out of the carcase with a light, flowing move-
ment guided by hand. Assisted by the strong fitting, the shelf can be moved upwards with utmost ease. As a result, the upper or the two upper storage
levels come to a halt within easy reach of the user and the complete contents are ready to hand whenever needed.
This look is available in the ALNOPLAN, ALNODUR, ALNOFINE, ALNOSUND, ALNOSIGN, ALNOGRAND, ALNOCLASS and ALNOSTRUCT ranges.
The handles are at base unit height. Handle trims and bar handles are not foreseen here.
Without continuous tall unit doors With continuous tall unit doors
35
PRODUCT INFORMATION
■ The lift-up door with upward-lifting function ■ Upward folding doors are a particularly ■ This fitting gently swings one-part doors
is ideal for standing microwaves and other attractive option as these do not infringe on upwards above the carcase, providing easy
electrical appliances in tall units. headroom when the door is open. access to the storage space and leaving
■ When the appliance is needed, the door is ■ Combined with easy opening and integrated plenty of headroom.
simply pushed upwards. cushioning, the fitting provides a completely
new experience when opening and closing
■ Wall units in a height of 390 mm are also
doors.
available with this function.
■ The maintenance-free fitting permits effort-
less and smooth opening and closing.
36
■ Servodrive for upward-folding, Softlift and lift-up doors with upward lifting function
■ Servodrive with electronic drive system makes it easier to open and
close upward folding, Softlift and upward lifting doors.
■ Simply tap the door to trigger the opening movement.
■ The door closes by actuating a remote switch at the front of each
side panel (see small photo).
■ The door moves with complete freedom, so that
- it can be stopped and moved by the user entirely as desired.
- maximum safety is ensured for the user and it can be opened
and closed easily in the event of a power failure.
■ The Servodrive function can be ordered with surcharge
MPS SERVO HL.
■ Depending on the planning situation, a ZLZ 100 power supply
unit must also be ordered.
37
PRODUCT INFORMATION
Two carcases merge into one sliding door unit. In this way, one half is
10 mm
always completely concealed by the sliding door.
38
■ High-gloss lacquered finishes
Genuine lacquer is a speciality at ALNO. The fronts are sanded, lacquered and polished as many as five times.
This technique produces a wonderfully smooth finish and incredible shine - rewarding you with perfect reflections.
■ Lacquer laminate
Lacquer This innovative material composition permits a low-cost introduction to
PET laminate the world of lacquers. The coloured PET laminate coating on the front of
the MDF panels is simply painted over. Additional elements in gloss lami-
nate or matt lacquer are ideal accessories for a kitchen environment.
MDF board
Melamine
■ High-gloss lacquer
Lacquer Several polyester primer coats are applied to the MDF panel using this
Primer sophisticated lacquer coating process. Surfaces and edges are polished
and sanded between the individual lacquer coats. Finally, the surface is
buffed to give it its ultimate gloss and look of quality.
MDF board The accessories in gloss lacquer have shiny edges whereas accessories in
high-gloss lacquer are without any joint.
Melamine
Lacquer
39
DIMENSION SYSTEM
40
■ Height dimensions, working heights base units
Base units 715 mm
■ 5 standard plinth heights
(mm):
860 885 910 935 960
105 / 130 / 155 / 180 / 205
■ Base units 715 mm:
5 standard working heights
(mm)
(with 40 mm worktops):
860 / 885 / 910 /935 / 960
■ Base units 780 mm:
5 standard working heights
(mm)
(with 40 mm worktops):
5,5 x 130 = 715
925 / 950 / 975 / 1000 / 1025
Base units 780 mm
Width concept
18
18
35 35
35 35 35
41
ORDERING INFORMATION
■ Contact
Have you reached a point advising the customer at which you require help and would like to consult our planning specialists?
Do you have questions about special constructions or special planning solutions, or do you need detailed information on a product?
Fax, inland department, general handling +49 7552 213866 Email inland KSCI1@alno.de
Fax, export department, general handling +49 7552 213238 Email export KSCE1@alno.de
42
IT SERVICE
■ IT service
ALNO offers you a comprehensive service for IT (IT systems). Product master data
This covers the following points:
The master data of this sales manual are compiled directly by ALNO
■ Review and assessment of the IT kitchen planning systems available for computer-aided kitchen planning and order processing.
on the market (focusing on: Carat, KPS DesignStudio, Winner, Win- The stock of data reflects the complete sales manual including the
Soft). products: ALNO, accessories, electrical appliances and replacement
parts.
■ Objective and independent customer advisory service in the field of
EDP kitchen planning systems.
Data for the 2020 product round are made available to all software firms
■ Recommendation of the respective system that most corresponds to by ALNO in IDM format version 2.4 for further processing and conversion
your wishes and requirements. in their planning systems.
■ Mainly recommended: Carat, KPS DesignStudio, Winner
■ Collaboration with software publishers in further development of
kitchen planning software tailored to needs.
■ Ongoing management of the article data, in addition to up-to-date
and rapid supply of all software publishers with all the product mas-
ter data.
■ Conducting tests and providing advice on using data transmission/EDI
systems for transferring order data by e-mail in the EANCOM industry
standard. In production applications with the following systems:
– KPS DesignStudio
– Carat
– WINNER
– WinSoft
■ Please write to us if you are interested in EANCOM, the electronic
order processing system.
■ Pricing
The figures in the respective price group columns represent addable The commercial and graphic order processing is carried out using
ident points and not prices. The specialist trade uses its individual the COE (CAD Order Entry) system. This is a standard software tool
multiplication factor for pricing and thereby arrives at the price via the developed by HOMAG eSOLUTION GmbH, Pfalzgrafenweiler.
ident point. Prices are charged on the basis of those valid on the day of We use the Carat retail system for planning kitchens.
delivery plus VAT.
43
GENERAL INFORMATION ON CARE
Whenever possible, clean off soiling straight away. This often eliminates ALNO offers various different protective coverings in order to protect
the need for cleaning products. Ideally use warm water and a soft, damp your furniture against cooking vapours, moisture and heat. Do not allow
cloth. Then wipe the surfaces dry. Otherwise, only clean with household, cooking vapours and heat from small electrical appliances such as
water-soluble cleaning products or kitchen cleaners. Do not use aggres- microwaves, coffee makers, kettles and egg boilers to act directly on the
sive liquid cleaners or abrasive or scouring cleaning products. Polishes, furniture components! Clouds of vapour cause the furniture components
waxes and solvents are also unsuitable for cleaning kitchen surfaces to swell. Always switch on the extractor when cooking!
and do more harm than good. Follow the manufacturer’s advice when
using microfibre cloths as they have different surface structures and can Cleaning felt liners
damage the fronts. Do not use a steam cleaner as it may cause water
impregnation which makes the furniture components swell. Clean by lightly brushing or vacuuming. To freshen up the colour, rub
the felt lightly with a solution of water and vinegar. If the felt gets wet,
Ensure that the relative humidity in your kitchen is between 40 % and please make sure you let it dry slowly in air at room temperature.
65 % where possible. No damage will be caused if this level is exceeded Heavy stains can be dabbed with a soapy solution of wool detergent
for a period of 2 – 3 days. You, too, feel most comfortable at this relative or washing-up liquid. Then absorb residual liquid with a cloth.
humidity level.
The felt must not be washed as it is not resistant to washing.
Maintenance of moving parts
Dry cleaning: heavily soiled felt can be dry-cleaned.
Hinges, especially on frequently used doors, should be lightly oiled once
a year. The same applies to other fittings with steel hinges. All plastic
moving parts do not need regular maintenance.
These are high quality, hard-wearing fronts with laminated surfaces. Fronts with lacquer laminate surfaces are characterised by an excellent
Please use only household, water-soluble cleaning products or kitchen gloss or an elegant matt finish. The fronts are coated with a protective
cleaners to clean them. Ideally use warm water and a soft, damp cloth. film to ensure that they do not sustain any damage during processing
Then wipe the surfaces dry. Do not use any aggressive or scouring prod- or transport. This film should only be removed during the last working
ucts, polishes, waxes, hard sponges or steam cleaners. stage of assembly. It is essential that you use a clean, dust-free, moist
window leather or cotton cloth for cleaning. Any stains, particularly from
Use glass cleaner to remove stubborn dirt (old fat residues, streaks, shoe strongly coloured substances and liquids, should be cleaned away as
polish, felt-tip pen or the like). Test the cleaner beforehand on an incon- soon as possible with water, if necessary adding a standard commer-
spicuous spot! cially available, non-scouring household cleaner such as Sidol kitchen
cleaning cream or a glass cleaner. Stains should not be allowed to dry
on. Nitro or synthetic resin dilutions, including nitro-based cleaners, are
not suitable for cleaning the surface! Do not use any abrasives. Do not
use any coloured cleaners undiluted and concentrated. Do not dry clean.
44
■ Care advice for fronts and surfaces
Care advice for wood fronts, solid or veneered Care advice for ALNOART
Wood is a living material with natural variation in colour, growth and The various ALNOART product finishes provide the last word in kitchen
structure (including small cracks), which is not covered by our warranty. design. The fronts consist of the aluminium frame and various infill
Light and sun shining on the wood cause changes in colour that are panels. When cleaning the aluminium frame, please note the instruc-
dependent on the type of material, and are therefore not cause for com- tions on “Cleaning aluminium”, as well as the care instructions for the
plaint. Variations in humidity will cause wood to expand or contract. As various materials when cleaning the panels. When cleaning the front,
a result, parts of the solid wood frame may jut out slightly, for example, for example, you should remove any residual moisture from the gap
depending on the type of wood. between aluminium frame and infill panel.
Wood should not be exposed to either extremely damp or extremely dry Care advice for glass
air. Normal air humidity of 45 to 65 % is ideal for finished wood.
Please clean the glass with regular glass cleaner and then wipe the
It is therefore important to always switch on the extractor and/or make doors dry immediately after spraying them. Make sure that no moisture
sure there is sufficient ventilation when cooking. gets into the profiling and the frames of glass doors.
Remove any residual moisture on the fronts immediately. The surfaces Care advice for glass fronts
are protected by high-quality, multilayered lacquers which make the
doors and drawer fronts largely resistant to dirt. They should be cleaned The front can basically be cleaned with all commercially available, mild
with a moist cloth or a soft damp brush, and always with the grain of the cleaning agents. The best result is naturally obtained by cleaning the
wood. You should then wipe the doors dry to make sure that there is no glass lining on the front with a glass cleaner. However, the manufac-
moisture left in the profiling, in the corners and on the edges. Dirt should turer’s instructions must be noted in this case, too. If stains with par-
not be allowed to dry on and must be removed straight away. Never use ticularly intensive colouring are not removed from the satin-finished
aggressive or scouring products, polishes, waxes or steam cleaners. fronts immediately, they can only be removed in a complex cleaning
process. Laminate edges on the front which have been dulled by rub-
Care advice for high-gloss lacquer bing can be refreshed with a high-gloss polish. Please dry the front
again after cleaning using a cloth. Do not use any aggressive liquid
The surface of high-gloss lacquer fronts is formed by several coats of detergents or abrasive powdered detergents, hard sponges or steam
lacquer, protected by a final special lacquer that is very durable and cleaners! Specially designated micro-fibre cloths may also be used for
resistant to wear. Please only use a soft clean cloth and water-soluble cleaning glass.
household cleaning products. Do not use any aggressive or scouring pro-
ducts, polishes, waxes or steam cleaners. Glass cleaner or Sidol kitchen Care advice for ceramic fronts
cleaning cream can be used to remove stubborn dirt (old fat residues,
shoe polish, felt-tip pen or the like). Test the cleaner beforehand on an Ceramic material is a 100 % natural product. State-of-the-art manufac-
inconspicuous spot! Alternatively, the surface can be treated with special turing methods produce an extremely homogeneous, hard material.
high-gloss furniture polish (ALNO Product No. ZV 5502). The fired surface is totally food-compatible and can be recycled. Due
to its composition, the ceramic material is completely resistant to UV
Care instructions for matt lacquer / textured lacquer light, as well as to scratching and abrasion. The surface is extremely
easy to care for and can be cleaned with household cleaning products.
Lacquered fronts are characterized by high-quality surface properties, Do not use any aggressive liquid detergents or abrasive powdered
as they are without joins. The surface is protected by a special lacquer detergents, hard sponges or steam cleaners! Furniture polishes and
with very high mechanical resistance as well as resistance to abrasion detergents containing grease or wax should not be used, as they tend
which gives the surface its look and feel. Please use only water-soluble to fill the surface texturing and form a layer which binds dirt.
household cleaning products. Do not use any aggressive or scouring
products, polishes, waxes or steam cleaners. Glass cleaner or Sidol
kitchen cleaning cream can be used to remove stubborn dirt (old fat
residues, shoe polish, felt-tip pen or the like). Test the cleaner before-
hand on an inconspicuous spot!
45
GENERAL INFORMATION ON CARE
You should use a slightly damp cloth with a liquid household cleaner The tops are treated with a food-grade oil. The wood must be re-oiled
to clean the units and shelves with laminated surfaces, the drawers regularly, especially after being thoroughly cleaned. The top must be
and deep drawers. Always wipe the furniture dry with a soft cloth after dry when oiling it. Despite oiling the surface to protect it, this does not
cleaning! If you use a cloth that is too wet, water can seep into cracks provide complete protection from staining (e.g. from preparing deeply
and cause the wood to swell. coloured vegetables). We therefore recommend using a chopping board
for all cutting work. Please do not allow any water to stand on the sur-
Do not use any aggressive or scouring products, polishes, waxes, hard face – excessive moisture could cause the top to warp.
sponges or steam cleaners.
Ceramic worktops
Use glass cleaner to remove stubborn dirt (old fat residues, shoe polish,
felt-tip pen or the like). Test the cleaner beforehand on an inconspicuous Normal dirt can be removed with water and regular washing-up liquid.
spot! Then clean thoroughly with warm water and wipe dry. For stubborn dirt
and water marks, we recommend to use a stainless steel cleaner. This
Tip: To avoid having to clean stubborn dirt from the top of wall units, provides additional protection from a water-repellent protective film.
simply cover with newspaper. Do not use any aggressive or abrasive cleaning products.
Worktops are surfaced with high-pressure laminate. The surface is Handles and knobs can be cleaned with household cleaning products
hard-wearing and stain-resistant and can easily be cleaned with house- and a soft cloth.
hold cleaning products. We recommend using a soft synthetic brush for
cleaning worktops with deep textures. Do not use aggressive or scouring Cleaning stainless steel
products.
Normal dirt can be removed with water and regular washing-up liquid.
The worktops are heat-resistant up to 180° C (to EN 438). Then clean thoroughly with warm water and wipe dry. For stubborn dirt
Caution: Hot pots and pans can exceed this temperature and cause and water marks, we recommend to use a stainless steel cleaner. This
damage, so please always use a pan stand. Worktops should not be provides additional protection from a water-repellent protective film.
used as cutting surfaces, as knives can leave marks even in the hard Do not use any aggressive or abrasive cleaning products.
laminate coating. Although they are protected by high-quality surfaces,
experience has shown that the laminate edges are more sensitive than Cleaning aluminium
the worktop surface, so you should take extra care to protect them from
scratches. Remove dirt as quickly as possible. Only clean the aluminium elements
with warm water or a neutral product. A special regular aluminium
Make sure water does not penetrate into the edges of the worktop, cleaning product with preservatives is recommended especially for
into the cracks between worktop lengths and where there are cut-outs. cleaning heavy dirt.
Please remove standing water and water residue with a dry cloth as
quickly as possible! When using a dishwasher, we recommend that Avoid using scouring cleaning products, as they scratch and thus dam-
you keep the machine closed for about 30 minutes once the cycle age the surface. Acidic products or those containing chloride, e.g. lemon,
has finished so that steam does not get under the worktop and cause vinegar, oven spray and the like, also damage the aluminium.
damage as a result of expansion.
46
■ Care advice for plastic sinks and plastic parts
Cleaning synthetic sinks Cleaning plastic parts
These built-in sinks are manufactured from a very high-quality, durable Drawers, cutlery inserts, inset dishes, carousel shelves, scoops, plastic
synthetic material. Household washing-up liquids and cleaning products profiling, waterproof plinth panels, fridges and freezers can be cleaned
can be used, with the exception of scouring powders /milk. Stubborn dirt with a mild washing-up liquid and a damp cloth. Do not use aggressive or
can be removed with dishwasher powder. Lime scale deposits from hard scouring products
water can be removed with vinegar or lime scale removers. Although the
material is resistant to all household chemicals, we recommend that you
rinse them away after use. Plastic sinks should not be used as a cutting
surface, as knives leave marks.
Please follow the care advice in the manufacturer’s instructions for use. Make sure you clean regularly in order to ensure the continued function-
Each appliance comes with its own instructions for use. ing of the appliance. Please follow the manufacturer’s instructions for
care and use. To prevent steam penetrating wood components of hoods
Ceramic hobs / induction hobs and surrounding units, always switch the extractor fan on when cooking!
You should clean your hob after every use, as even small dirt particles Dishwashers
can burn on the next time it is switched on. You can remove light dirt
with a damp cloth, then dry it well! Once the cycle has finished, the dishwasher should not be opened
straight away, as the escaping steam can cause damage to the work-
Make sure that sugar or sugary food (e.g. jam) is not left to burn onto tops above and to the adjacent units. When the cycle has finished, the
the hob. Remove immediately with a damp cloth. steam condenses on the internal walls and drains away.
You should wait 30 minutes before taking the dishes out. Make sure that
Remove stubborn dirt, lime scale and water marks, as well as metallic the protective strip is fitted correctly above the dishwasher (underneath
residue from pans, with special cleaner for hobs. Burnt-on residue is the worktop).
best removed when the hob is still hot with a blade or scraper. Also read the appliance manufacturer’s operating instructions.
Built-in cookers
Please follow the care advice in the manufacturer’s instructions for use.
Each appliance comes with its own instructions for use.
47
ALNO GUARANTEE
■ Guarantee
ALNO furniture is subject to the following warranty conditions:
1. The warranty lasts for 2 years from the date of delivery.
2. The warranty covers defects which, despite careful treatment and observance of ALNO’s care and installation instructions, occur during the
period specified in item 1 and are proved to be the result of material or manufacturing flaws.
3. ALNO will rectify the defect by replacement or repair at ALNO’s option. Any claim under the warranty will not cover the replacement of
discontinued product lines.
4. The following are excluded from the guarantee:
■ Accessories and other parts not sold to the purchaser by ALNO but by suppliers.
■ Normal wear and tear resulting from use for the purpose intended, through dampness, strong heating and movement.
■ Properties typical of the product or properties resulting from material composition, e.g. variations in the colour or texture of wood and
changes occurring in wood over the course of time.
■ Damage resulting from improper installation, care or treatment, in particular from making furniture too wet.
■ Damage associated with modifications or repairs to furniture unless ALNO has explicitly confirmed the modifications or repairs in advance.
■ Accessories outsourced by ALNO primarily come with the warranty given by the manufacturer producing them.
5. Delivery of replacement parts or repair does not extend the original guarantee period, nor result in a new guarantee and in particular not for
replacement parts.
6. Removal and refitting costs incurred in the process of replacing parts will be charged to the person ordering them.
7. The current terms and conditions of sale and delivery of Neue Alno GmbH in the current version shall apply.
48
TERMS AND CONDITIONS
■ Terms and Conditions of Sale and Supply of Neue ALNO GmbH – hereinafter ALNO
Valid only for commercial partners - hereinafter referred to as purchasers - who are enterprises within the meaning of Section 14 of the German Civil Code, not their cus-
tomers. (Version dated 1 January 2018)
I. Scope of Terms and Conditions 5. Claims for damages due to defaulted delivery are limited to 10% of the a. The purchaser shall duly discharge its obligation to examine the goods
1. Deliveries by ALNO shall exclusively be made subject to these Terms and order value, unless ALNO has caused delay by wilful intent or gross neg- and report complaints as required by § 377 of the German Commer-
Conditions. Purchaser’s contradictory or divergent general terms and con- ligence. cial Code. Defects in particular must be reported to ALNO in writing
ditions of trade will be accepted by ALNO only insofar as ALNO has explic- without delay, obvious defects and missing parts being reported at the
itly agreed to such terms and conditions in writing. The present Terms and VII. Terms of Payment latest within 10 days of receiving the goods and defects not evident
Conditions shall also apply even when ALNO undertakes delivery to the 1. Unless otherwise agreed, all payments are due 14 days after the invoice upon examination within the same time from discovery.
purchaser without reservation in full knowledge of the purchaser’s con- date and without any discounts. b. In the case of a defect, ALNO may choose at its discretion to fulfil its
tradictory or divergent terms and conditions. 2. Upon expiry of the time for payment the purchaser shall be deemed in obligations by correcting the fault or by delivering goods free of defects
2. The present Terms and Conditions shall also apply to all future relations default. In the event of a delay in payment the purchaser shall pay ALNO or, in the case of models which are no longer available, by delivering
with the customer. the statutory default interest and reimburse the other damage caused by equivalent, defect-free goods. ALNO is entitled to make the cure owed
3. Individual agreements with the purchaser made in a particular case shall delay including in particular all fees, costs and expenses incurred by ALNO dependent upon payment of the due purchase price by the purchaser.
always have priority over these Terms and Conditions. A written contract in connection with all litigation successfully brought against the purchas- However, the purchaser is authorised to retain a reasonable portion of
or ALNO’s written confirmation shall be deemed as establishing the terms er in Germany or elsewhere. the purchase price in proportion to the defect.
of such agreements, subject to proof to the contrary. 3. ALNO shall be entitled to assign its claims against the purchaser to third c. Any expenses of dismantling and installation in the case of replacement
parties, especially to a factor. shall not be to ALNO’s account unless ALNO was originally obliged to
II. Quotation, Conclusion of Contract 4. Cheques will be accepted only by express agreement and in all cases carry out installation.
1. Quotations from ALNO are always subject to confirmation and without only on account of performance. Expenses arising shall be borne by d. The purchaser shall grant ALNO an opportunity and an appropriate
obligation. This also applies in relation to catalogues, technical documen- the purchaser. time for subsequent performance. In case of refusal or permanent
tation (such as drawings, plans, cost estimates, references to DIN stand- 5. The purchaser may only offset claims that are undisputed or legally refusal to cooperate if necessary, with the result that ALNO is una-
ards), other product descriptions or documents supplied by ALNO, includ- enforceable. The purchaser may only exercise a right of retention on ble to effect subsequent performance, ALNO shall not be required to
ing in electronic form. account of claims that are undisputed or judged valid under law and which remedy the defect.
2. An order placed by the purchaser is deemed a binding contractual offer. are based on the same contractual relationship. e. If subsequent performance proves to be in vain, the purchaser shall be
A contract of sale shall only be concluded with the purchaser when the 6. ALNO is entitled to make outstanding deliveries or services subject to pay- entitled to reduce the purchase price or to rescind the contract and also,
order is acknowledged in writing by ALNO or when delivery is made. ment in advance if after conclusion of the contract ALNO becomes aware if ALNO is at fault, to demand damages in lieu of performance or reim-
If an order is not confirmed by ALNO in writing within three weeks of of circumstances likely to significantly reduce the purchaser’s credit- bursement of expenses in accordance with Clause X.
being received by ALNO, or is not executed, a contract of sale shall not worthiness and which jeopardize the payment of the outstanding debts f. ALNO’s warranty for repairs and individual spare parts shall be the
be deemed concluded and the purchaser is no longer bound by the order. due to ALNO by the purchaser. same as for the original delivery item, until expiry of the period of limi-
3. ALNO reserves the right after conclusion of the contract to modify the 7. In the event that the purchaser declines to meet the terms of the pur- tation for warranty claims relating to the original delivery item.
product to an extent reasonable to the purchaser as part of its continuous chase contract from the outset, ALNO has the right to demand 20% of g. The warranty obligation shall not apply if the goods have suffered as a
further development efforts. the purchase price as flat-rate compensation for damage without proof result of incorrect handling or storage or non-compliance with ALNO’s
thereof, unless the purchaser can prove that lesser damage has been care instructions or if the goods have been modified or repaired with-
III. Documents suffered by ALNO. out the written consent of ALNO.
ALNO retains ownership of and copyright in all documents made available 3. The purchaser shall only be entitled to seek recourse against ALNO to
to the purchaser in conjunction with placing of the order. The purchaser VIII.Retention of Title the extent that the purchaser has not concluded any agreements with
shall treat the documents as strictly confidential and shall not disclose 1. The goods shall remain ALNO’s property until payment of all present and its customers exceeding the mandatory claims based on defects which
them to third parties without ALNO’s written consent. future claims arising from business relations with the purchaser. In the are stipulated by law.
case of a current account agreement the retention of title shall refer to 4. The purchaser’s statutory rights in respect of defects shall become stat-
IV. Prices the approved balance. ute-barred two years after delivery of the goods.
1. Unless otherwise agreed in a particular case, the ID points indicated in 2. Until revocation as per sub-clause 3. below, the purchaser is entitled to
ALNO’s current sales manuals shall apply. resell or rent the goods in the course of its ordinary business. It here and X. Liability
2. Prices are quoted ex works, excluding packaging and insurance and now assigns to ALNO all claims in the amount of the final invoice value of 1. ALNO shall be liable towards the purchaser for damage arising only in the
exclusive of the statutory VAT levied at the time of invoicing. This will be debts due to ALNO arising from such resale. If the purchaser has made case of intent or gross negligence on its part. Furthermore ALNO shall be
shown separately in the invoice. a current account agreement with its customers, the claim assigned to liable up to the amount of the typically foreseeable loss for losses caused
3. We reserve the right to adjust prices reasonably on account of changes ALNO by the purchaser also relates to the approved balance and, in the by ALNO in breach of an essential contractual obligation. Essential con-
in labour costs, cost of materials and distribution for deliveries made four event of the purchaser’s insolvency, to the causal balance then available. tractual obligations are all duties protecting the purchaser’s essential legal
months after conclusion of contract. The purchaser shall also assign to ALNO the claims arising against third positions under the contract, which the terms and purpose of the contract
parties from combination of the goods with real property. are intended to provide; duties serving the proper performance of the con-
V. Delivery Item, Delivery, Shipping 3. Until revocation, the purchaser shall be authorised to collect the assigned tract and on the fulfillment of which the purchaser may regularly rely shall
1. Unless otherwise agreed, delivery is made ex works; this is also the place claims arising from resale but not authorised otherwise to dispose of them, likewise be deemed essential duties.
of performance for the delivery and any subsequent delivery. for example by assignment. However, this does not affect ALNO’s right to 2. The above limitation of liability shall also apply in the event of liabili-
2. ALNO shall be entitled to make part deliveries or provide part services to collect the outstanding receivables itself. ALNO shall undertake not to col- ty by ALNO’s statutory representatives, employees and vicarious agents.
an extent reasonably acceptable to the purchaser. lect the debts as long as the purchaser meets its obligations of payment 3. The above limitation of liability shall not apply in conjunction with man-
3. Packaging shall be taken back only by express agreement unless ALNO is from the revenues received, does not default in payment and in particular datory liability for death, bodily injury or damage to health, according to
legally obliged to take back packaging. does not file for bankruptcy or stop payment. However, if this is the case the provisions of product liability law and insofar as ALNO has warrant-
4. If ALNO ships the goods at the purchaser’s request the following provi- ALNO can demand that the purchaser give ALNO details of the assigned ed the nature of a product, or the successful outcome of a performance
sions shall apply: claims and the debtors, provide all information necessary for collection, or accepted a procurement risk and in other cases in which unlimited lia-
a. Shipping and carriage shall be at purchaser’s risk. The risk of acciden- hand over the relevant documents and notify the customer of assign- bility is prescribed by law.
tal destruction and accidental deterioration of the goods and the delay ment. Moreover, in this case ALNO shall be entitled to revoke the purchas- 4. Any further Liability of ALNO save as provided above shall be exclud-
risk passes at handover of the goods to the carrier. If acceptance has er’s authority for further disposal and processing of the reserved goods. ed. This shall apply to all compensation claims irrespective of ground in
been stipulated, this shall determine the passing of risk. The statuto- All costs of collection will be borne by the purchaser. law, including in particular with regard to claims for culpa in contrahendo,
ry provisions of the law on contracts for work and services shall also 4. Factoring, pledging and transfer of the conditional goods by way of secu- claims for breach of other main and secondary obligations or for tort.
apply analogously to stipulated acceptance in other respects. Default rity are not permitted before full payment of the secured claims. The same
in taking delivery by the purchaser shall be equated with delivery or applies to the claims assigned to ALNO and factoring of such claims. In the XI. Purchaser’s Liability
acceptance. event of seizures or other third-party interventions, the purchaser must If a claim is made against ALNO due to non-compliance with provisions
b. Save as otherwise agreed, ALNO shall be entitled personally to deter- notify ALNO in writing without delay so that ALNO may file a complaint of turnover tax law by the purchaser, the purchaser shall reimburse ALNO
mine the mode of shipping, in particular the transport contractor and in accordance with § 771 of the German Code of Civil Procedure (ZPO). for all financial detriment and/or losses thus arising.
shipping route. Insofar as the third party is not able to reimburse ALNO for the judicial and
c. Unless otherwise agreed the goods shall be insured in ALNO’s favour at extra-judicial costs of an action in accordance with § 771 ZPO, the pur- XII. Data Protection
the purchaser’s expense against damage in transit. At the request and chaser is liable to ALNO for the losses incurred. Due to the establishing of business relations between ALNO and the pur-
expense of the purchaser ALNO shall secure the additional insurance 5. The purchaser shall only process or refashion the goods for ALNO. If the chaser, ALNO will store and process the data necessary for business trans-
cover required by the purchaser. goods are processed with other items not belonging to ALNO, ALNO shall actions in electronic form. ALNO shall comply with the legal requirements
5. If the purchaser defaults in taking delivery, fails to cooperate or if delivery acquire joint ownership of the new article in the proportion of the value of concerning data protection.
is delayed for other reasons for which the purchaser is responsible, ALNO the goods (final invoice amount) to the other processed items at the time
shall be entitled to demand compensation for the loss thus arising includ- of processing. Apart from that, the article created by processing shall be XIII. Applicable Law and Jurisdiction
ing extra expenses (such as storage costs). governed analogously by the provisions applying to reserved goods. 1. The competent Pfullendorf courts shall have jurisdiction for all disputes
6. For settlement of transport damages, it is necessary that the purchas- 6. The purchaser shall treat the goods with care. The purchaser shall at its arising from and in connection with the contractual relationship between
er (consignee) arranges for an inventory to be taken together with an own expense insure them against damage by fire, water and theft. ALNO and the purchaser. ALNO shall be entitled to sue the purchaser at
authorized agent of ALNO or the transport company without delay and to 7. If the purchaser is in breach of contract, especially if it has defaulted on any other venue permitted by law.
fully cooperate in all acts necessary for claim settlement without delay. payments, ALNO shall be entitled to ask for the restoration of the condi- 2. German law shall apply, excluding the conflict of laws provisions and
7. The shipping risk for return of the purchased item is borne by the pur- tional goods after setting a reasonable period of grace or the dispensabil- excluding the UN Convention on Contracts for the International Sale of
chaser if the return is not due to legal or contractual obligations on ity of this on the basis of statutory regulations. The request for restoration Goods.
ALNO’s part. does not at the same time constitute a declaration of cancellation of the
contract. Instead, ALNO shall be entitled merely to request restoration of XIV. Validity of the Contract, Written Form, Covenant not to Assign
VI. Delivery Periods the goods and reserve the right to cancel. ALNO has the right to use the 1. Should individual provisions of these Terms and Conditions prove invalid,
1. The time of delivery is based on the information from ALNO in the order goods with the due and proper care of a businessman and to credit reve- the effectiveness of the remaining provisions as well as of the contract
acknowledgment. If no information is given in the acknowledgment, the nue derived therefrom against the unsatisfied claims, allowing for reason- itself shall remain unaffected. The ineffective provision shall be replaced
delivery period is based on the delivery date notification valid at the able utilisation expenses. by the legal provision.
acknowledgment date. 8. If the realisable value of the security exceeds the receivables deriving 2. Supplementary agreements to these Terms and Conditions and/or
2. The time of delivery is met: from the ongoing business relationship and due to ALNO from the pur- changes to contractual agreements are not valid unless made in written
a. in the case of delivery without installation, if the goods have been chaser by more than 10%, then ALNO is obliged upon request to release form. This also applies to the waiver of the requirement for written form.
handed over to the carrier on time. If shipping or pickup is delayed specified securities held up to that extent. Written form must comply with the legal requirements of § 126 of the
on grounds for which ALNO is not responsible, then the term is con- 9. If the above retention of title or assignment of claim provisions are not German Civil Code (BGB).
sidered satisfied if the notification of readiness to ship occurred with- effective under the foreign law within the purview of which ALNO’s goods 3. The purchaser may assign claims against ALNO only with the prior writ-
in the agreed term lie, the security corresponding to the retention of title and assignment of ten consent of ALNO.
b. in the case of delivery and installation, if installation of the goods takes claim under that law shall be deemed stipulated. If the purchaser’s coop-
place within the time. eration is needed in order to create such rights, the purchaser shall take
3. If meeting of the delivery term is not possible due to circumstances all measures necessary to establish and maintain such rights.
beyond ALNO’s control, such as natural disasters, war, energy shortages
or legal labour dispute measures at ALNO or its suppliers, then an appro- IX. Claims based on Defects
priate extension of the delivery term enters into force. Should the imped- 1. Product details and other information supplied by ALNO never represent
iment last longer than six weeks, then ALNO and the purchaser have the a guarantee or warranty.
right of withdrawal. In this case, any consideration already paid by the 2. Within the framework of the statutory obligation, ALNO shall accept liabili-
purchaser shall be refunded by ALNO without delay. ty for defects in the goods delivered as defined in the following provisions.
4. If ALNO fails to meet an agreed delivery period for other than the above Deviations customary in the trade and minor deviations are not consid-
reasons, the occurrence of default shall be determined as the law directs. ered hereunder and are not deemed defects.
A written reminder from the purchaser is necessary in all cases, however.
49
NOTES
50
Product information
Product information STARLINE
STARLINE
uncompromising in quality, form and functionality. The horizontal recessed grip as a small engagement in the carcase emphasizes the beauty of the
simple line. STARLINE is available with the horizontal recessed grip for base units, display units, wall units and tall units.
■■ The mitre cuts on the 90° outer corners of the L-shaped recessed
grips can be concealed with cover and connecting caps in the match-
ing colour or remain visible (glued) if preferred. The length of the
recessed grip is adapted accordingly on site.
■■ The recessed grip appears elegant in the same colour/material finish
as the front and in the contrasting finish in stainless steel-effect.
■■ The max. length of the recessed grip (not including joint) is 3660 mm.
■■ Recessed grips are included in the unit price.
■■ The recessed grips are cut to size in accordance with the kitchen
planning and supplied with the units. Only a few adjustments need be
made by the fitter on site (e.g. wall connections).
■■ The recessed grip is clipped and fixed in the carcase cutout using
metal clips.
51
Product information STARLINE
Recessed grip
Griffmulde
Finishes, front colour Recommended recessed grip types
can be combined with all front colours G199 Stainless steel-effect
PG 1 340 ALNOSTAR PLAN
52
Product information STARLINE
Recessed grip
Griffmulde
Finishes, front colour Recommended recessed grip types
PG 3 452 ALNOSTAR PURE
No. 280 ultra white super matt G628 ultra white textured
No. 451 ultra white super matt, brass-effect edging G628 ultra white textured
No. 286 black super matt G610 black textured
No. 454 black super matt, brass-effect edging G610 black textured
No. 476 ultra white super matt (end-grained wood edge), core natural oak-effect edging G628 ultra white textured
No. 503 ultra white super matt, dark grey metallic edging G628 ultra white textured
No. 465 white super matt G601 white textured
No. 470 light grey super matt G679 light grey textured
No. 471 fango super matt G680 fango textured
No. 474 graphite super matt G623 graphite structure
No. 477 black super matt (end-grained wood edge), core natural oak-effect edging G610 black textured
No. 504 black super matt, dark grey metallic edging G610 black textured
PG 3 470 ALNOSTAR GLINT
53
Product information STARLINE
Recessed grip
Finishes, front colour Recommended recessed grip types
PG 4 422 ALNOSTAR SUND
No. 597 high-gloss NCS or RAL colour G599 high-gloss NCS or RAL colour
PG 9 344 ALNOSTAR CLASS
No. 449 old oak natural (end-grained wood edge) G375 old oak natural
No. 376 old oak smoke grey (end-grained wood edge) G331 old oak smoke grey
No. 380 old oak reddish brown (end-grained wood edge) G338 old oak reddish brown
PG 9 400 ALNOSTAR CERA
54
Product information STARLINE
Base units
■ Carcase height 780 and 715 mm ■ When installing a dishwasher, the recessed grip also continues below
carcase depth 560 and 710 mm the worktop. Standard dishwashers (820 mm high) can be installed in
carcases 715 mm high with a plinth height over 160 mm and in car-
■ The recessed grip runs directly below the worktop or in the middle
cases 780 mm high with all standard plinth heights. XXL dishwashers
of the base unit height.
(865 mm high) require a plinth height of at least 205 mm in carcases
■ The unit is installed at a distance of 18 mm from the wall. 715 mm high and a plinth height of at least 140 mm in carcases
This ensures that the front runs flush with the front edge of the work- 780 mm high.
top and modular panel. Worktops in standard depths can be used.
■ The carcase sides are partly cut out in adjacent units with recessed
grips in the middle. These are finished with decor and charged with
surcharge SSU 78 H / SSU 72 H.
The following solutions are possible at the end of a line of base units:
Visible sides with side recess and “partly cut-out recessed grip mount” RBS side claddings, modular panels or
direct wall connection
■ Units with visible sides and “partly cut-out recessed grip mount” are produced with a depth
of 578 mm (560 mm + 18 mm) and 728 mm (710 mm + 18 mm).
■ The cutout is covered on the inside with a plastic moulding in a matching colour.
■ At the end of the line, the visible sides are “partly cut-out”, in combination with differences in
unit height and continuations they are cut through to create a continuous recessed grip.
However, the recessed grip can also be joined on account of different forms (L- or C-shape).
■ When planning the continuation from the tall unit to the base unit with a continuous recessed
grip please note that the worktop on top of the base units must be at least 20 mm thick to
cover the continuous recessed grip slot in the tall unit. 16 mm thick worktops are not possible
in this planning option with a visible side.
Side cladding, two-part
■ The visible sides must be ordered in all material versions (finish, laminate gloss,
veneered and lacquered). At the end of a row of units or when planning
islands, the look of the front layout is also con-
tinued across the side cladding.
55
Product information STARLINE
■■ The doors and flaps installed at the top open in response to a simple
ergonomic tap on the Tip-On fitting which is hole-mounted in the
carcase edge.
56
Product information STARLINE
■ Visible sides are not possible for tall units with vertical recessed grips.
The units must be clad with modular panels.
■ The bevelled edges on the carcase are finished in the same colour as
the carcase interior. The tall unit pilaster with finger-pull profile almost
completely conceals the bevelled carcase edge.
■ A modular column with a half-profile should be ordered in conjunction
with a modular panel for the end of the line.
■ In specific planning situations, it may not be possible to include a
modular column with recessed grip profile for covering the bevelled
edge. The surcharge for the visible side in carcase decor SSS...H also
includes the option of an angled edge in a straight version.
(Only possible opposite the handle area: only right-hand carcase side
for right-mounted doors)
57
Product information STARLINE
357/390
■ 4 base unit heights (mm): Depending on the unit model, the horizontal recessed grip runs in the middle of the base unit height,
357 / 390 / 715 / 780 directly below the worktop or on the 10th level.
■ 4 tall unit heights (mm):
1300 / 1950 / 2080 / 2210
58
Product information STARLINE
260
480
545
40
780
715
59
Product information STARLINE
Depth dimension, units with horizontal recessed grip and visible sides
18 mm deeper.
508/658
60
Keyword Index / Contents from A-Z
A AUM 91
AUS 1 SC
4.88
6.22
BR 50 19
BR 50 32
5.21
5.21
EA 45 26 7
EA 45 32
8.114
8.115
AA 451 9.19
AUS 100 C 6.21, 6.23 BR 505 19 5.23 EA 45 39 8.116
AA 452 9.19
AUS 100 G 6.30 BR 505 32 5.23 EA 45 39 4 8.116
AA 454 9.20
AUS 12 G 6.30 BR 60 19 5.21 EA 45 39 7 8.116
AA 455 9.20
AUS 150 C 6.21, 6.23 BR 60 32 5.21 EA 50 26 8.114
AA 456 9.19
AUS 16 C 6.21 BR 605 19 5.23 EA 50 26 4 8.114
AAZ 1 9.20
AUS 16 UC 6.21 BR 605 32 5.23 EA 50 26 7 8.114
ABF 15 113 3.49
AUS 1S G 6.30 BR 80 19 5.21 EA 50 32 8.115
ABF 15 126 3.49
AUS 2 SC 6.22 BR 80 32 5.21 EA 50 39 8.116
ABF 15 139 3.49
AUS 20 C 6.21, 6.23 BR 805 19 5.23 EA 50 39 4 8.116
ABK 15 113 3.50
AUS 200 C 6.21, 6.23 BR 805 32 5.23 EA 50 39 7 8.116
ABK 15 126 3.50
AUS 2000 6.06 BR 90 19 5.21 EA 60 26 8.114
ABK 15 139 3.50
AUS 2016 6.12, 6.15 BR 90 32 5.21 EA 60 26 4 8.114
AG2S 45 126 1 3.45
AUS 26 FC 6.21 BR 905 19 5.23 EA 60 26 7 8.114
AG2S 60 126 1 3.45
AUS 2S G 6.30 BR 905 32 5.23 EA 60 32 8.115
AGRO 60 113 1 3.46
AUS 3 C 6.20 BRS 1005 19 5.21 EA 60 39 8.116
AGRO 60 113 1 S 3.47
AUS 3 G 6.30 BRS 1005 32 5.22 EA 60 39 4 8.116
AGRO 60 113 51 3.47
AUS 3 NC 6.22 BRS 2605 19 5.21 EA 60 39 7 8.116
AGRO 60 113 51 S 3.48
AUS 3 SC 6.22 BRS 2605 32 5.22 EA 80 26 8.114
AGRO 60 126 1 3.46
AUS 3000 5.19, 6.06 BRS 455 19 5.21 EA 80 26 4 8.114
AGRO 60 126 1 S 3.47
AUS 3016 5.18, 6.11 BRS 455 32 5.22 EA 80 26 7 8.114
AGRO 60 126 51 3.47
AUS 3100 6.06 BRS 505 19 5.21 EA 80 32 8.115
AGRO 60 126 51 S 3.48
AUS 3116 6.14 BRS 505 32 5.22 EA 80 39 8.116
AGRO 60 139 1 3.46
AUS 35 C 6.20 BRS 605 19 5.21 EA 80 39 4 8.116
AGRO 60 139 1 S 3.47
AUS 3500 6.06, 8.91 BRS 605 32 5.22 EA 80 39 7 8.116
AGRO 60 139 51 3.47
AUS 3516 6.12, 6.15 BRS 805 19 5.21 EA 90 26 8.114
AGRO 60 139 51 S 3.48
AUS 3S G 6.30 BRS 805 32 5.22 EA 90 26 4 8.114
AGRO 90 113 1 3.46
AUS 4 C 6.20 BRS 905 19 5.21 EA 90 26 7 8.114
AGRO 90 113 1 S 3.47
AUS 4 G 6.30 BRS 905 32 5.22 EA 90 32 8.115
AGRO 90 113 51 3.47
AUS 4 NC 6.22 EA 90 39 8.116
AGRO 90 113 51 S
AGRO 90 126 1
3.48
3.46
AUS 40 NC 6.22 D EA 90 39 4 8.116
AUS 4000 5.19, 6.06 DA 3 7.08 EA 90 39 7 8.116
AGRO 90 126 1 S 3.47 DA 5 7.08
AUS 4016 5.18, 6.11 EAB 15 72 A 8.116
AGRO 90 126 51 3.47 DB 300 7.08
AUS 4100 6.06 EAB 15 78 A 8.116
AGRO 90 126 51 S 3.48 DHF 90 3.50
AUS 4116 6.14 EASP 100 26 4 8.115
AGRO 90 139 1 3.46 DHIL 90 8.04
AUS 44 G 6.30 EASP 100 39 4 8.116
AGRO 90 139 1 S 3.47 DHL 60 65 1 8.03
AUS 47 NC 6.22 EASP 60 26 4 8.115
AGRO 90 139 51 3.47 DHL 60 78 1 8.03
AUS 5 C 6.20 EASP 60 39 4 8.116
AGRO 90 139 51 S 3.48 DHL 60 91 1 8.03
AUS 5 CS 6.20 EASP 80 26 4 8.115
AGS 45 113 1 3.45 DHL 90 65 1 8.04
AUS 50 G 6.30 EASP 80 39 4 8.116
AGS 60 113 1 3.45 DHL 90 78 1 8.04
AUS 54 C 6.20 EASP 90 26 4 8.115
AK 30 26 4.65 DHL 90 91 1 8.04
AUS 5600 6.07 EASP 90 39 4 8.116
AK 45 26 4.65 DIL 1 8.99
AUS 5700 6.07 EASW 60 18 8.114
AK 50 26 4.65 DS 3 7.08
AUS 5716 6.14 EAV 100 26 8.103
AK 60 26 4.65 DS 5 7.08
AUS 6000 5.19, 6.06 EAV 100 32 8.103
ARO 60 113 2 3.46 DV 135 7.08
AUS 6016 5.18, 6.12, 6.15 EAV 100 39 8.103
ARO 60 113 52 3.46
ARO 60 126 2 3.46
AUS 63 C
AUS 64 C
6.20
6.20 E EAV 120 26
EAV 120 32
8.103
8.103
ARO 60 126 52 3.46 EA 100 26 8.114
AUS 644 C 6.20 EAV 120 39 8.103
ARO 60 139 2 3.46 EA 100 26 4 8.114
AUS 65 C 6.21, 6.23 EAV 15 65 8.104
ARO 60 139 52 3.46 EA 100 26 7 8.114
AUS 67 C 6.21 EAV 15 72 8.106
ARO 60 152 2 3.46 EA 100 32 8.115
AUS 7 G 6.30 EAV 15 78 8.107
ARO 60 152 52 3.46 EA 100 39 8.116
AUS 7000 5.20, 6.06 EAV 30 130 8.111
ARO 90 113 2 3.46 EA 100 39 4 8.116
AUS 7010 6.07 EAV 30 156 8.112
ARO 90 113 52 3.46 EA 100 39 7 8.116
AUS 7016 5.18, 6.11 EAV 30 195 8.113
ARO 90 126 2 3.46 EA 120 26 8.114
AUS 7116 6.14 EAV 30 208 8.113
ARO 90 126 52 3.46 EA 120 32 8.115
AUS 7222 M 8.91 EAV 30 221 8.113
ARO 90 139 2 3.46 EA 120 39 8.116
AUS 7242 M 8.91 EAV 30 26 8.103
ARO 90 139 52 3.46 EA 15 72 A 8.116
AUS 82 6.04 EAV 30 32 8.103
ARO 90 152 2 3.46 EA 15 78 A 8.116
AUS 8216 6.15 EAV 30 39 8.103
ARO 90 152 52 3.46 EA 30 26 8.114
AUS 86 6.02 EAV 30 65 8.104
ARSC 00 26 ED V 3.38 EA 30 26 4 8.114
AUS 8616 6.12 EAV 40 26 8.103
ARSC 00 26 SW V 3.38 EA 30 26 7 8.114 EAV 40 32 8.103
ARSC 00 39 ED V
ARSC 00 39 SW V
3.37
3.37
B EA 30 32 8.115 EAV 40 39 8.103
BR 100 19 5.21 EA 30 39 8.116 EAV 45 130 8.111
AU 104 4.87, 8.38 BR 100 32 5.21 EA 30 39 4 8.116 EAV 45 156 8.112
AU 117 4.86, 8.38 BR 1005 19 5.23 EA 30 39 7 8.116 EAV 45 195 8.113
AU 52 4.89, 8.38 BR 1005 32 5.23 EA 40 26 8.114 EAV 45 208 8.113
AU 65 4.89, 8.38 BR 260 19 5.21 EA 40 26 4 8.114 EAV 45 221 8.113
AU 91 4.88, 8.38 BR 260 32 5.21 EA 40 26 7 8.114 EAV 45 26 8.103
AUB 104 4.87 BR 2605 19 5.23 EA 40 32 8.115 EAV 45 32 8.103
AUB 117 4.87 BR 2605 32 5.23 EA 40 39 8.116 EAV 45 39 8.103
AUB 65 4.89 BR 45 19 5.21 EA 40 39 4 8.116 EAV 45 65 8.104
AUB 91 4.88 BR 45 32 5.21 EA 40 39 7 8.116 EAV 45 65 1 8.105
AUM 104 4.88 BR 455 19 5.23 EA 45 26 8.114 EAV 45 72 8.106
AUM 117 4.87 BR 455 32 5.23 EA 45 26 4 8.114 EAV 45 72 1 8.106
AUM 52 4.89
a.01
a.02
a.03
a.04
a.05
a.06
P PS 105 49 A
PS 12
6.01
6.10
PWU 78 7 R
PWU 78 9
5.15
5.15
RB 50 91
RB 60 130
2.33
2.33, 2.55
P 00 5.17
PS 16 6.10 PWU 78 R 5.15 RB 60 130 H 10.85
P 03 5.17
PS 16 R 6.11 PWUF 5 V 5.14 RB 60 156 2.33
P 06 5.17
PS 19 6.10 PWUF 572 5.13 RB 60 33 H 10.46
P 10 5.18, 8.39
PS 42 6.01 PWUF 572 H 10.207 RB 60 39 2.32
P 13 5.17
PS 45 R 6.02 PWUF 572 R 5.13 RB 60 39 H 10.33
P 16 5.18
PS 46 6.01 PWUF 572 RH 10.207 RB 60 72 2.54
P 22 5.19, 8.39
PS 46 R 6.02 PWUF 572 RV 5.13 RB 60 72 H 10.46
P 23 5.19
PS 47 6.01 PWUF 578 5.12 RB 60 78 2.32
P 26 5.19
PS 48 6.01 PWUF 578 7 5.12 RB 60 78 2 2.32
P 26 90 8.07
PS 49 6.01 PWUF 578 7 H 10.207 RB 60 78 H 10.33
P 26 R 90 8.07
PS 52 S 5.20 PWUF 578 H 10.207 RB 60 91 2.33
PA 105 19 6.13
PS 53 H 5.20 PWUF 578 R 5.12 RB 80 33 H 10.46
PA 105 19 A 6.13
PS 56 S 5.20 PWUF 578 RH 10.207 RB 80 39 2.32
PA 105 49 6.03
PS 90 19 A 6.11 PWUF 578 RV 5.12 RB 80 39 H 10.33
PA 105 49 A 6.03
PS 90 49 A 6.02 PWUK 5 V 5.14 RB 90 33 H 10.46
PA 12 6.13
PV 5145 M 8.91 PWUK 5 VH 10.208 RB 90 39 2.32
PA 16 6.13
PV 56 M 8.91 PWUK 572 5.13 RB 90 39 H 10.33
PA 16 R 6.14
PW V 5.15 PWUK 572 H 10.207 RB2 30 72 2.54
PA 19 6.13
PWO 5 V 5.15 PWUK 572 R 5.13 RB2 30 72 H 10.46
PA 42 6.03
PWO 5 VH 10.209 PWUK 572 RH 10.207 RB2 30 78 2.32
PA 45 R 6.04
PWO 539 5.13 PWUK 572 RV 5.13 RB2 30 78 H 10.33
PA 46 6.03
PWO 539 H 10.208 PWUK 578 5.12 RB2 40 72 2.54
PA 46 R 6.04
PWO 539 HM 8.89 PWUK 578 7 5.12 RB2 40 72 H 10.46
PA 47 6.03
PWO 552 5.13 PWUK 578 7 H 10.207 RB2 40 78 2.32
PA 48 6.03
PWO 552 H 10.208 PWUK 578 H 10.207 RB2 40 78 H 10.33
PA 49 6.03
PWO 565 5.13 PWUK 578 R 5.12 RB2 45 72 2.54
PA 90 19 A 6.13
PWO 565 H 10.208 PWUK 578 RH 10.207 RB2 45 72 H 10.46
PA 90 49 A 6.03
PWO 578 5.13 PWUK 578 RV 5.12 RB2 45 78 2.32
PBL 1200 6.06
PWO 578 H 10.208 RB2 45 78 H 10.33
PC 22
PC 24
6.20
6.20
PWO 591 5.13 R RB2 50 72 2.54
PWO 591 H 10.208 RB 130 V 2.33, 2.55 RB2 50 72 H 10.46
PC 26 6.20 RB 156 V 2.33
PWS 5 V 5.14 RB2 50 78 2.32
PC 27 6.20 RB 39 V 2.32
PWS 5 VH 10.208 RB2 50 78 H 10.33
PC 28 6.20 RB 39 V H 10.33
PWS 5130 5.13 RB2 60 72 2.54
PC 29 6.20 RB 72 V 2.54
PWS 5130 H 10.208 RB2 60 72 H 10.46
PC 42 6.20 RB 78 V 2.32
PWS 5156 5.13 RB2 60 78 2.32
PC 44 6.20 RB 78 V H 10.33
PWS 5156 H 10.208 RB2 60 78 H 10.33
PC 46 6.20 RB 100 33 H 10.46
PWS 5195 5.13 RBS 130 4.90, 4.145
PC 47 6.20 RB 100 39 2.32
PWS 5195 H 10.208 RBS 130 1 H 10.162, 10.197
PC 48 6.20 RB 100 39 H 10.33
PWS 5208 5.13 RBS 130 3 1 3.07
PC 49 6.20 RB 120 33 H 10.46
PWS 5208 H 10.208 RBS 130 H 10.84, 10.102
PDS 142 208 D 8.32 RB 120 39 2.32
PWS 5221 5.13 RBS 130 R 4.90
PDSKP 142 208 D 8.31 RB 120 39 H 10.33
PWS 5221 H 10.208 RBS 130 RH 10.84
PDU 139 208 D 8.32 RB 30 130 2.33, 2.55
PWSK 5 V 5.14 RBS 156 4.77, 4.138
PDUKP 139 208 D 8.31 RB 30 130 H 10.85
PWSK 5 VH 10.209 RBS 156 H 10.158, 10.194
PILA 113 1 8.06 RB 30 156 2.33
PWSK 5130 5.13 RBS 195 4.65, 4.130
PILA 126 1 8.06 RB 30 72 2.54
PWSK 5130 H 10.208 RBS 195 H 10.81, 10.100, 10.150, 10.189
PILA 139 1 8.06 RB 30 72 H 10.46
PWSK 5156 5.13 RBS 208 4.45
PILO 65 8.06 RB 30 78 2.32
PWSK 5156 H 10.208 RBS 208 H 10.76, 10.134
PILO 78 8.06 RB 30 78 2 2.32
PWSK 5195 5.13 RBS 208 M 4.117
PILO 91 8.06 RB 30 78 H 10.33
PWSK 5195 H 10.208 RBS 208 MH 10.96, 10.180
PILS 130 8.06 RB 30 91 2.33
PWSK 5208 5.13 RBS 221 4.25
PILS 130 1 8.06 RB 40 72 2.54
PWSK 5208 H 10.208 RBS 221 H 10.71, 10.118
PILS 156 8.06 RB 40 72 H 10.46
PWSK 5221 5.13 RBS 221 M 4.103
PILS 156 1 8.06 RB 40 78 2.32
PWSK 5221 H 10.208 RBS 221 MH 10.91, 10.171
PILS 195 8.06 RB 40 78 2 2.32
PWU 5 V 5.14 RBS 33 2.43
PILS 195 1 8.06 RB 40 78 H 10.33
PWU 5 VH 10.208 RBS 36 H 10.45
PILS 208 8.06 RB 40 91 2.33
PWU 539 HM 8.89 RBS 36 RV H 10.45
PILS 208 1 8.06 RB 45 130 2.33, 2.55
PWU 572 5.12 RBS 39 2.19
PILS 221 8.06 RB 45 130 H 10.85
PWU 572 H 10.207 RBS 39 3 1 3.36
PILS 221 1 8.06 RB 45 156 2.33
PWU 572 R 5.12 RBS 39 3 1 H 10.65
PILU 78 8.05 RB 45 72 2.54
PWU 572 RH 10.207 RBS 39 F 8.60
PILU 78 1 8.06 RB 45 72 H 10.46
PWU 572 RV 5.12 RBS 39 FH 8.62
PILU 78 7 8.05 RB 45 78 2.32
PWU 578 5.12 RBS 39 H 10.32
PILU 78 7 R 8.05 RB 45 78 2 2.32
PWU 578 7 5.12 RBS 39 RV H 10.32
PILU 78 R 8.05 RB 45 78 H 10.33
PWU 578 7 H 10.207 RBS 52 3 1 3.31
PILU 78 V 8.05 RB 45 91 2.33
PWU 578 H 10.207 RBS 52 3 1 H 10.62
PK 1000 6.06 RB 50 130 2.33, 2.55
PWU 578 R 5.12 RBS 65 3 1 3.26
PK 2000 6.06 RB 50 130 H 10.85
PWU 578 RH 10.207 RBS 65 3 1 H 10.59
PPK 1000 6.06 RB 50 156 2.33
PWU 578 RV 5.12 RBS 72 2.41
PPS 89 6.05 RB 50 72 2.54
PWU 72 5.15 RBS 72 H 10.43
PPS 89 S 6.05 RB 50 72 H 10.46
PWU 72 9 5.15 RBS 72 R 2.41
PPS 89 T 6.05 RB 50 78 2.32
PWU 72 R 5.15 RBS 72 RH 10.43
PS 105 19 6.10 RB 50 78 2 2.32
PWU 78 5.15 RBS 72 RV H 10.43
PS 105 19 A 6.11 RB 50 78 H 10.33
PWU 78 7 5.15 RBS 729 1 R 2.41
PS 105 49 6.01
a.07
a.08
SA 30 221 DVAK 10.104 SB 50 208 4.29, 8.37 SE 120 195 M 4.122 SIA 30 156 DV 10.152
SA 30 221 MA 4.93 SB 50 208 D 4.29, 8.37 SE 120 208 4.32, 8.37 SIA 30 156 M 4.133
SA 30 221 MAK 4.93 SB 50 208 DV 10.119 SE 120 208 M 4.108 SIA 30 156 MV 10.190
SA 30 221 MVA 10.163 SB 50 208 M 4.107 SE 120 221 4.12, 8.37 SIA 30 156 V 10.152
SA 30 221 MVAK 10.163 SB 50 208 MV 10.172 SE 120 221 M 4.94 SIA 30 195 4.51
SA 30 221 VA 10.104 SB 50 208 V 10.119 SEBE 130 20 72 HV 4.142 SIA 30 195 1 F 8.63
SA 30 221 VAK 10.104 SB 50 221 4.09, 8.37 SEBE 130 20 78 HV 4.82 SIA 30 195 1 FV 8.63
SA 45 130 A 4.81, 4.141 SB 50 221 D 4.09, 8.37 SEBE 130 72 H 4.141 SIA 30 195 D 4.51
SA 45 130 VA 10.159, 10.195 SB 50 221 DV 10.103 SEBE 130 78 H 4.81 SIA 30 195 DV 10.137
SA 45 156 1 A 4.71 SB 50 221 M 4.93 SEBE 156 20 72 HMV 4.134 SIA 30 195 H 10.77
SA 45 156 1 VA 10.153 SB 50 221 MV 10.163 SEBE 156 20 78 HV 4.72 SIA 30 195 M 4.122
SA 45 156 A 4.70 SB 50 221 V 10.103 SEBE 156 72 HM 4.134 SIA 30 195 M H 10.97
SA 45 156 DA 4.70 SB 60 130 4.81, 4.141, 8.38 SEBE 156 78 H 4.71 SIA 30 195 MV 10.182
SA 45 156 DVA 10.153 SB 60 130 V 10.159, 10.195 SEBE 20 156 MV 4.135 SIA 30 195 V 10.137
SA 45 156 MA 4.133 SB 60 156 4.69, 8.38 SEBE 20 156 V 4.72 SIA 30 208 4.31
SA 45 156 MVA 10.190 SB 60 156 1 4.69 SEBE 20 130 V 4.82, 4.142 SIA 30 208 D 4.31
SA 45 156 VA 10.153 SB 60 156 1 V 10.151 SEBE 65 130 4.82, 4.142 SIA 30 208 DV 10.121
SA 45 195 A 4.50 SB 60 156 D 4.69, 8.38 SEBE 65 130 1 V 10.159, 10.195 SIA 30 208 H 10.72
SA 45 195 DA 4.50 SB 60 156 DV 10.151 SEBE 65 130 H 10.82, 10.101 SIA 30 208 M 4.108
SA 45 195 DVA 10.136 SB 60 156 M 4.133 SEBE 65 156 4.72 SIA 30 208 M H 10.92
SA 45 195 MA 4.121 SB 60 156 MV 10.190 SEBE 65 156 1 V 10.153 SIA 30 208 MV 10.173
SA 45 195 MVA 10.181 SB 60 156 V 10.151 SEBE 65 156 M 4.134 SIA 30 208 V 10.121
SA 45 195 VA 10.136 SB 60 195 4.49, 8.37 SEBE 65 156 MV 10.191 SIA 30 221 4.11
SA 45 208 A 4.30 SB 60 195 D 4.49, 8.37 SEBF 135 130 4.90 SIA 30 221 D 4.11
SA 45 208 DA 4.30 SB 60 195 DV 10.135 SEBF 135 156 4.77 SIA 30 221 DV 10.105
SA 45 208 DVA 10.120 SB 60 195 M 4.121 SEBF 135 195 4.65 SIA 30 221 H 10.67
SA 45 208 MA 4.107 SB 60 195 MV 10.181 SEBF 135 208 4.45 SIA 30 221 M 4.94
SA 45 208 MVA 10.172 SB 60 195 V 10.135 SEBF 135 221 4.25 SIA 30 221 M H 10.87
SA 45 208 VA 10.120 SB 60 208 4.29, 8.37 SEBF 20 130 V 4.90, 4.145 SIA 30 221 MV 10.164
SA 45 221 A 4.10 SB 60 208 D 4.29, 8.37 SEBF 20 130 V V 10.162, 10.197 SIA 30 221 V 10.105
SA 45 221 DA 4.10 SB 60 208 DV 10.119 SEBF 20 130 VH 10.84, 10.102 SIA 45 130 4.81, 4.141
SA 45 221 DVA 10.104 SB 60 208 M 4.107 SEBF 20 156 MV 4.138 SIA 45 130 F 8.66
SA 45 221 MA 4.93 SB 60 208 MV 10.172 SEBF 20 156 V 4.77 SIA 45 130 FV 8.66
SA 45 221 MVA 10.163 SB 60 208 V 10.119 SEBF 20 156 V V 10.158, 10.194 SIA 45 130 H 10.82, 10.101
SA 45 221 VA 10.104 SB 60 221 4.09, 8.37 SEBF 20 195 M VH 10.100 SIA 45 130 V 10.159, 10.195
SB 30 195 4.49, 8.37 SB 60 221 D 4.09, 8.37 SEBF 20 195 MV 4.130 SIA 45 156 4.71
SB 30 195 D 4.49, 8.37 SB 60 221 DV 10.103 SEBF 20 195 V 4.65 SIA 45 156 D 4.71
SB 30 195 DV 10.135 SB 60 221 M 4.93 SEBF 20 195 V V 10.150, 10.189 SIA 45 156 DV 10.152
SB 30 195 M 4.121 SB 60 221 MV 10.163 SEBF 20 195 VH 10.81 SIA 45 156 M 4.133
SB 30 195 MV 10.181 SB 60 221 V 10.103 SEBF 20 208 M V 4.117 SIA 45 156 MV 10.190
SB 30 195 V 10.135 SBF 15 130 4.90, 4.145 SEBF 20 208 M VH 10.96 SIA 45 156 V 10.152
SB 30 208 4.29, 8.37 SBF 15 130 H 10.84, 10.102 SEBF 20 208 V 4.45 SIA 45 195 4.51
SB 30 208 D 4.29, 8.37 SBF 15 130 V 10.162, 10.197 SEBF 20 208 V V 10.134, 10.180 SIA 45 195 1 F 8.63
SB 30 208 DV 10.119 SBF 15 156 4.76 SEBF 20 208 VH 10.76 SIA 45 195 1 FV 8.63
SB 30 208 M 4.107 SBF 15 156 M 4.138 SEBF 20 221 M V 4.103 SIA 45 195 D 4.51
SB 30 208 MV 10.172 SBF 15 156 V 10.158, 10.194 SEBF 20 221 M VH 10.91 SIA 45 195 DV 10.137
SB 30 208 V 10.119 SBF 15 195 4.64 SEBF 20 221 V 4.25 SIA 45 195 H 10.77
SB 30 221 4.09, 8.37 SBF 15 195 H 10.80 SEBF 20 221 V V 10.118, 10.171 SIA 45 195 M 4.122
SB 30 221 D 4.09, 8.37 SBF 15 195 M 4.130 SEBF 20 221 VH 10.71 SIA 45 195 M H 10.97
SB 30 221 DV 10.103 SBF 15 195 M H 10.100 SEKL 110 130 A 4.81, 4.141 SIA 45 195 MV 10.182
SB 30 221 M 4.93 SBF 15 195 V 10.150, 10.189 SEKL 110 130 HA 10.82, 10.101 SIA 45 195 V 10.137
SB 30 221 MV 10.163 SBF 15 208 4.44 SEKL 110 130 VA 10.159, 10.195 SIA 45 208 4.31
SB 30 221 V 10.103 SBF 15 208 H 10.76 SEKL 110 156 A 4.71 SIA 45 208 D 4.31
SB 45 195 4.49, 8.37 SBF 15 208 M 4.117 SEKL 110 156 MA 4.134 SIA 45 208 DV 10.121
SB 45 195 D 4.49, 8.37 SBF 15 208 M H 10.95 SEKL 110 156 MVA 10.191 SIA 45 208 H 10.72
SB 45 195 DV 10.135 SBF 15 208 V 10.134, 10.180 SEKL 110 156 VA 10.153 SIA 45 208 M 4.108
SB 45 195 M 4.121 SBF 15 221 4.25 SEKL 115 130 A 4.81, 4.141 SIA 45 208 M H 10.92
SB 45 195 MV 10.181 SBF 15 221 H 10.71 SEKL 115 130 HA 10.82, 10.101 SIA 45 208 MV 10.173
SB 45 195 V 10.135 SBF 15 221 M 4.103 SEKL 115 130 VA 10.159, 10.195 SIA 45 208 V 10.121
SB 45 208 4.29, 8.37 SBF 15 221 M H 10.91 SEKL 115 156 A 4.71 SIA 45 221 4.11
SB 45 208 D 4.29, 8.37 SBF 15 221 V 10.117, 10.171 SEKL 115 156 MA 4.134 SIA 45 221 D 4.11
SB 45 208 DV 10.119 SBK 15 130 4.91, 4.146 SEKL 115 156 MVA 10.191 SIA 45 221 DV 10.105
SB 45 208 M 4.107 SBK 15 156 4.79, 4.139 SEKL 115 156 VA 10.153 SIA 45 221 H 10.67
SB 45 208 MV 10.172 SBK 15 195 4.67, 4.132 SEKL 125 130 A 4.81, 4.141 SIA 45 221 M 4.94
SB 45 208 V 10.119 SBK 15 208 4.47, 4.119 SEKL 125 130 HA 10.82, 10.101 SIA 45 221 M H 10.87
SB 45 221 4.09, 8.37 SBK 15 221 4.27, 4.105 SEKL 125 130 VA 10.159, 10.195 SIA 45 221 MV 10.164
SB 45 221 D 4.09, 8.37 SBO 20 10.76, 10.80, 10.84, 4.25, 4.27 SEKL 125 156 A 4.71 SIA 45 221 V 10.105
SB 45 221 DV 10.103 SBT 15 130 4.91, 4.146 SEKL 125 156 MA 4.134 SIA 50 130 4.81, 4.141
SB 45 221 M 4.93 SBT 15 156 4.79, 4.139 SEKL 125 156 MVA 10.191 SIA 50 130 F 8.66
SB 45 221 MV 10.163 SBT 15 195 4.67, 4.132 SEKL 125 156 VA 10.153 SIA 50 130 FV 8.66
SB 45 221 V 10.103 SBT 15 208 4.47, 4.119 SIA 30 130 4.81, 4.141 SIA 50 130 H 10.82, 10.101
SB 50 195 4.49, 8.37 SBT 15 221 4.27, 4.105 SIA 30 130 F 8.66 SIA 50 130 V 10.159, 10.195
SB 50 195 D 4.49, 8.37 SCH 11 11 1 2.17, 2.44, 3.12, 3.19, 3.27 SIA 30 130 FV 8.66 SIA 50 156 4.71
SB 50 195 DV 10.135 SE 105 195 4.52 SIA 30 130 H 10.82, 10.101 SIA 50 156 D 4.71
SB 50 195 M 4.121 SE 105 208 4.32 SIA 30 130 V 10.159, 10.195 SIA 50 156 DV 10.152
SB 50 195 MV 10.181 SE 105 221 4.12 SIA 30 156 4.71 SIA 50 156 M 4.133
SB 50 195 V 10.135 SE 120 195 4.52, 8.37 SIA 30 156 D 4.71 SIA 50 156 MV 10.190
a.09
a.10
SPAMH 60 2 2.25 SSH 73 5.16 SU 102 2A 221 4.14 SU 140 221 M 4.97
SPAMH 60 72 2.50 SSH 78 H 10.210 SU 102 2A 221 H 10.68 SU 140 221 MV 10.166
SPAMH 60 72 2 2.50 SSH 91 H 10.210 SU 102 2A 221 M 4.96 SU 140 221 V 10.108
SPAMH 60 72 H 10.40 SSS 05 5.16 SU 102 2A 221 MV 10.166 SU 145 2T 156 4.73, 4.135
SPAMH 60 H 10.27 SSS 130 H 10.210 SU 102 2A 221 V 10.107 SU 145 2T 156 1 4.74, 4.136
SPD 90 2.24 SSS 195 H 10.210 SU 102 2A 221MH 10.88 SU 145 2T 156 1 V 10.155, 10.192
SPD 90 2 2.24 SSS 208 H 10.210 SU 102 72 195 4.59 SU 145 2T 156 V 10.155, 10.192
SPD 90 72 2.48 SSS 221 H 10.210 SU 102 72 195 H 10.79 SU 145 2T 195 4.55
SPD 90 72 2 2.48 SSS 25 5.16 SU 102 72 195 V 10.144 SU 145 2T 195 3 4.56
SPE 105 2.24 SSS 55 5.16 SU 102 72 208 4.39 SU 145 2T 195 3 V 10.142
SPE 105 2 2.24 SSS 65 5.16 SU 102 72 208 H 10.74 SU 145 2T 195 4 4.55
SPE 105 39 F 8.58 SSS 75 5.16 SU 102 72 208 V 10.128 SU 145 2T 195 4 V 10.141
SPE 105 39 FH 8.61 SSU 33 5.16 SU 102 72 221 4.19 SU 145 2T 195 V 10.140
SPE 105 72 2.48 SSU 33 H 10.210 SU 102 72 221 H 10.69 SU 145 2T 208 4.35, 4.111
SPE 105 72 2 2.48 SSU 35 5.16 SU 102 72 221 V 10.112 SU 145 2T 208 3 4.36
SPE 105 72 H 10.39 SSU 39 H 10.210 SU 102 A 130 4.82 SU 145 2T 208 3 V 10.126
SPE 105 H 10.26 SSU 65 5.16 SU 102 A 130 V 10.160 SU 145 2T 208 4 4.35
SPE 110 2.24 SSU 72 5.16 SU 102 A 156 4.72 SU 145 2T 208 4 V 10.125
SPE 110 2 2.24 SSU 72 H 10.210 SU 102 A 156 M 4.135 SU 145 2T 208 V 10.124
SPE 110 72 2.48 SSU 78 H 10.210 SU 102 A 156 MV 10.191 SU 145 2T 221 4.15, 4.97
SPE 110 72 2 2.48 ST 60 195 A 4.51 SU 102 A 156 V 10.154 SU 145 2T 221 3 4.16
SPE 115 2.24 ST 60 195 DA 4.51 SU 122 130 4.82, 4.143 SU 145 2T 221 3 V 10.110
SPE 115 2 2.24 ST 60 195 DVA 10.137 SU 122 130 F 8.66 SU 145 2T 221 4 4.15
SPE 115 39 F 8.58 ST 60 195 MA 4.122 SU 122 130 FV 8.66 SU 145 2T 221 4 V 10.109
SPE 115 39 FH 8.61 ST 60 195 MVA 10.182 SU 122 130 H 10.82, 10.101 SU 145 2T 221 V 10.108
SPE 115 72 2.48 ST 60 195 VA 10.137 SU 122 130 V 10.160, 10.196 SU 1452T 1561M 4.136
SPE 115 72 2 2.48 ST 60 208 A 4.31 SU 122 156 4.73 SU 1452T 1561MV 10.192
SPE 115 72 H 10.39 ST 60 208 DA 4.31 SU 122 156 M 4.135 SU 1452T 1952M 4.125
SPE 115 H 10.26 ST 60 208 DVA 10.121 SU 122 156 MV 10.191 SU 1452T 1952MV 10.185
SPE 125 2.24 ST 60 208 MA 4.108 SU 122 156 V 10.154 SU 1452T 2082M 4.111
SPE 125 2 2.24 ST 60 208 MVA 10.173 SU 122 208 H 10.73 SU 1452T 2082MV 10.176
SPE 125 39 F 8.58 ST 60 208 VA 10.121 SU 122 208 M H 10.93 SU 1452T 2212M 4.97
SPE 125 39 FH 8.61 ST 60 221 A 4.11 SU 122 221 M H 10.89 SU 1452T 2212MV 10.167
SPE 125 72 2.48 ST 60 221 DA 4.11 SU 122 2A 208 H 10.74, 8.85 SU 152 156 4.73
SPE 125 72 2 2.48 ST 60 221 DVA 10.105 SU 122 2A 208MH 10.94 SU 152 156 D 4.73
SPE 125 72 H 10.39 ST 60 221 MA 4.94 SU 122 2A 221MH 10.89 SU 152 156 DV 10.155
SPE 125 H 10.26 ST 60 221 MVA 10.164 SU 122 2T 130 4.82, 4.143 SU 152 156 V 10.154
SPO 45 2.27 ST 60 221 VA 10.105 SU 122 2T 130 V 10.160, 10.196 SU 152 195 4.56
SPO 60 2.27 STU 72 1 2.45 SU 122 2T A 208 V 10.124 SU 152 195 V 10.141
SR 00 130 1 V 4.91, 4.146 STU 78 1 2.18 SU 122 2TA 156 4.73 SU 152 208 4.36
SR 00 156 1 V 4.78, 4.139 SU 102 130 4.142 SU 122 2TA 156 V 10.154 SU 152 208 V 10.125
SR 00 195 V 4.66, 4.131 SU 102 130 F 8.66 SU 122 2TA 195 4.54 SU 152 221 4.16
SR 00 208 V 4.46, 4.118 SU 102 130 FV 8.66 SU 122 2TA 195 V 10.140 SU 152 221 V 10.109
SR 00 221 V 4.26, 4.104 SU 102 130 H 10.82, 10.101 SU 122 2TA 208 4.34 SU 152 2T 195 4.55
SR 30 130 1 4.91, 4.146 SU 102 130 V 10.196 SU 122 2TA 221 4.14 SU 152 2T 195 F 8.65
SR 30 156 1 4.78, 4.139 SU 102 195 4.54 SU 122 2TA 221 V 10.108 SU 152 2T 195 FV 8.65
SR 30 195 1 4.66, 4.131 SU 102 195 1 F 8.63 SU 122 2TA208M 4.110 SU 152 2T 195 V 10.141
SR 30 208 1 4.46, 4.118 SU 102 195 1 FV 8.63 SU 122 2TA208MV 10.175 SU 152 2T 208 4.35
SR 30 221 1 4.26, 4.104 SU 102 195 H 10.78 SU 122 2TA221M 4.96 SU 152 2T 208 V 10.125
SRA 30 130 4.91, 4.146 SU 102 195 M 4.124 SU 122 2TA221MV 10.166 SU 152 2T 221 4.15
SRA 30 156 4.78, 4.139 SU 102 195 M H 10.98 SU 122 A 156 4.73, 4.135 SU 152 2T 221 V 10.109
SRA 30 195 4.66, 4.131 SU 102 195 MV 10.183 SU 122 A 156 V 10.154, 10.192 SU 158 2T 195 4.56
SRA 30 208 4.46, 4.118 SU 102 195 V 10.139 SU 122 A 195 4.54 SU 158 2T 195 V 10.141
SRA 30 221 4.26, 4.104 SU 102 208 4.34 SU 122 A 195 1 F 8.64 SU 158 2T 208 4.36
SRAL 30 130 8.05 SU 102 208 H 10.73 SU 122 A 195 1 FV 8.64 SU 158 2T 208 V 10.125
SRAL 30 156 8.05 SU 102 208 M 4.110 SU 122 A 195 M 4.124 SU 158 2T 221 4.16
SRAL 30 195 8.05 SU 102 208 M H 10.93 SU 122 A 195 MV 10.184 SU 158 2T 221 V 10.109
SRAL 30 208 8.05 SU 102 208 MV 10.174 SU 122 A 195 V 10.140 SU 159 195 4.56
SRAL 30 221 8.04 SU 102 208 V 10.123 SU 122 A 208 4.34 SU 159 195 M 4.125
SRE 30 130 4.91, 4.146 SU 102 221 4.14 SU 122 A 208 M 4.110 SU 159 195 MV 10.185
SRE 30 156 4.78, 4.139 SU 102 221 H 10.68 SU 122 A 208 MV 10.175 SU 159 195 V 10.142
SRE 30 195 4.66, 4.131 SU 102 221 M 4.96 SU 122 A 208 V 10.124 SU 159 208 4.36
SRE 30 208 4.46, 4.118 SU 102 221 M H 10.88 SU 122 A 221 4.14 SU 159 208 M 4.111
SRE 30 221 4.26, 4.104 SU 102 221 MV 10.165 SU 122 A 221 M 4.96 SU 159 208 MV 10.176
SSA 53 5.16 SU 102 221 V 10.107 SU 122 A 221 MV 10.166 SU 159 208 V 10.126
SSA 63 5.16 SU 102 2A 195 4.54 SU 122 A 221 V 10.108 SU 159 221 4.16
SSA 73 5.16 SU 102 2A 195 H 10.78, 8.82 SU 1222TA 195M 4.124 SU 159 221 M 4.97
SSH 03 5.16 SU 102 2A 195 M 4.124 SU 1222TA 195MV 10.184 SU 159 221 MV 10.167
SSH 1 7.02, 7.04 SU 102 2A 195 MV 10.184 SU 140 195 4.55 SU 159 221 V 10.110
SSH 23 5.16 SU 102 2A 195 V 10.139 SU 140 195 M 4.125 SU 159 2T 195 4.56
SSH 33 5.16 SU 102 2A 195MH 10.98 SU 140 195 MV 10.184 SU 159 2T 195 1 4.56
SSH 39 H 10.210 SU 102 2A 208 4.34 SU 140 195 V 10.140 SU 159 2T 195 1 V 10.142
SSH 43 5.16 SU 102 2A 208 H 10.73, 8.84 SU 140 208 4.35 SU 159 2T 195 M 4.125
SSH 52 H 10.210 SU 102 2A 208 M 4.110 SU 140 208 M 4.111 SU 159 2T 195 MV 10.185
SSH 53 5.16 SU 102 2A 208 MV 10.175 SU 140 208 MV 10.175 SU 159 2T 195 V 10.142
SSH 63 5.16 SU 102 2A 208 V 10.123 SU 140 208 V 10.124 SU 159 2T 208 4.36
SSH 65 H 10.210 SU 102 2A 208MH 10.93 SU 140 221 4.15 SU 159 2T 208 1 4.36
a.11
SU 159 2T 208 1 V 10.126 SU 88 130 F 8.66 SU 88 ISIA 208 M 4.109 SUB 130 F 8.66
SU 159 2T 208 M 4.111 SU 88 130 FV 8.66 SU 88 ISIA 208 M H 10.92 SUB 130 FV 8.66
SU 159 2T 208 MV 10.176 SU 88 130 H 10.82, 10.101 SU 88 ISIA 208 MV 10.174 SUB 130 M 4.143
SU 159 2T 208 V 10.126 SU 88 130 V 10.160, 10.196 SU 88 ISIA 208 V 10.122 SUB 130 MV 10.196
SU 159 2T 221 4.16 SU 88 195 4.53 SU 88 ISIA 221 4.13 SUB 130 V 10.161
SU 159 2T 221 1 4.16 SU 88 195 1 F 8.63 SU 88 ISIA 221 H 10.68 SUB 156 4.74, 4.136
SU 159 2T 221 1 V 10.110 SU 88 195 1 FV 8.63 SU 88 ISIA 221 M 4.95 SUB 156 V 10.156, 10.192
SU 159 2T 221 M 4.97 SU 88 195 H 10.77 SU 88 ISIA 221 MH 10.88 SUB 195 4.61
SU 159 2T 221 MV 10.167 SU 88 195 M 4.123 SU 88 ISIA 221 MV 10.165 SUB 195 2 4.60
SU 159 2T 221 V 10.110 SU 88 195 M H 10.97 SU 88 ISIA 221 V 10.106 SUB 195 2 D 4.60
SU 178 195 4.57 SU 88 195 MV 10.182 SU 88 S2A 195 4.53 SUB 195 2 DV 10.145
SU 178 195 1 4.57 SU 88 195 V 10.138 SU 88 S2A 195 M 4.123 SUB 195 2 H 10.79
SU 178 195 1 D 4.57 SU 88 208 4.33 SU 88 S2A 195 MV 10.183 SUB 195 2 V 10.145
SU 178 195 1 DV 10.143 SU 88 208 H 10.72 SU 88 S2A 195 V 10.139 SUB 195 D 4.61
SU 178 195 1 V 10.142 SU 88 208 M 4.109 SU 88 S2A 208 4.33 SUB 195 F 8.64
SU 178 195 2 4.57 SU 88 208 M H 10.92 SU 88 S2A 208 M 4.109 SUB 195 FV 8.64
SU 178 195 2 F 8.65 SU 88 208 MV 10.173 SU 88 S2A 208 MV 10.174 SUB 195 M 4.127
SU 178 195 2 FV 8.65 SU 88 208 V 10.122 SU 88 S2A 208 V 10.123 SUB 195 M H 10.98
SU 178 195 M 4.126 SU 88 221 4.13 SU 88 S2A 221 4.13 SUB 195 MD 4.127
SU 178 195 MV 10.185 SU 88 221 H 10.67 SU 88 S2A 221 M 4.95 SUB 195 MDV 10.186
SU 178 195 V 10.143 SU 88 221 M 4.95 SU 88 S2A 221 MV 10.165 SUB 195 MV 10.186
SU 178 208 4.37 SU 88 221 M H 10.87 SU 88 S2A 221 V 10.107 SUB 208 4.41
SU 178 208 1 4.38 SU 88 221 MV 10.164 SU 88N 195 4.62 SUB 208 2 4.40
SU 178 208 1 D 4.38 SU 88 221 V 10.106 SU 88N 195 V 10.147 SUB 208 2 D 4.40
SU 178 208 1 DV 10.127 SU 88 2A 156 4.72 SU 88N 208 4.42 SUB 208 2 DV 10.130
SU 178 208 1 V 10.127 SU 88 2A 156 M 4.135 SU 88N 208 V 10.131 SUB 208 2 H 10.74
SU 178 208 2 4.37 SU 88 2A 156 MV 10.191 SU 88N 221 4.22 SUB 208 2 V 10.130
SU 178 208 2 V 10.127 SU 88 2A 156 V 10.154 SU 88N 221 V 10.115 SUB 208 D 4.41
SU 178 208 3 4.37 SU 88 2A 195 4.53 SU 88N 2A 195 4.62 SUB 208 M 4.113
SU 178 208 4 V 10.126 SU 88 2A 195 H 10.78, 8.82 SU 88N 2A 195 V 10.146 SUB 208 M H 10.94
SU 178 208 M 4.112 SU 88 2A 195 M 4.123 SU 88N 2A 208 4.42 SUB 208 MD 4.113
SU 178 208 MV 10.176 SU 88 2A 195 M H 10.98 SU 88N 2A 208 V 10.131 SUB 208 MDV 10.177
SU 178 208 V 10.126 SU 88 2A 195 MV 10.183 SU 88N 2A 221 4.22 SUB 208 MV 10.177
SU 178 221 4.18 SU 88 2A 195 V 10.139 SU 88N 2A 221 V 10.115 SUB 221 4.21
SU 178 221 1 4.17 SU 88 2A 208 4.33 SUB ISIA 195 2 4.60 SUB 221 2 4.20
SU 178 221 1 V 10.111 SU 88 2A 208 H 10.73, 8.84 SUB ISIA 195 2 D 4.60 SUB 221 2 D 4.20
SU 178 221 2 4.18 SU 88 2A 208 M 4.109 SUB ISIA 195 2 DV 10.146 SUB 221 2 DV 10.114
SU 178 221 3 4.17 SU 88 2A 208 M H 10.93 SUB ISIA 195 2 H 10.79 SUB 221 2 H 10.69
SU 178 221 3 V 10.110 SU 88 2A 208 MV 10.174 SUB ISIA 195 2 V 10.146 SUB 221 2 V 10.114
SU 178 221 M 4.98 SU 88 2A 208 V 10.123 SUB ISIA 195 M 4.127 SUB 221 D 4.21
SU 178 221 MV 10.167 SU 88 2A 221 4.13 SUB ISIA 195 M H 10.99 SUB 221 M 4.99
SU 178 221 V 10.111 SU 88 2A 221 H 10.68 SUB ISIA 195 MD 4.127 SUB 221 M H 10.89
SU 178 2T 195 4.58 SU 88 2A 221 M 4.95 SUB ISIA 195 MDV 10.186 SUB 221 MD 4.99
SU 178 2T 195 2 4.58 SU 88 2A 221 M H 10.88 SUB ISIA 195 MV 10.186 SUB 221 MDV 10.168
SU 178 2T 195 2 V 10.143 SU 88 2A 221 MV 10.165 SUB ISIA 208 2 4.40 SUB 221 MV 10.168
SU 178 2T 195 3 4.58 SU 88 2A 221 V 10.107 SUB ISIA 208 2 D 4.40 SUB 2A 130 4.84
SU 178 2T 195 3 V 10.143 SU 88 72 195 4.58 SUB ISIA 208 2 DV 10.130 SUB 2A 130 M 4.143
SU 178 2T 195 3F 8.65 SU 88 72 195 8 4.126 SUB ISIA 208 2 H 10.75 SUB 2A 130 M H 10.102
SU 178 2T 195 M 4.126 SU 88 72 195 H 10.78 SUB ISIA 208 2 V 10.130 SUB 2A 130 MV 10.196
SU 178 2T 195 MV 10.185 SU 88 72 195 V 10.144 SUB ISIA 208 M 4.113 SUB 2A 130 V 10.161
SU 178 2T 195 V 10.142 SU 88 72 208 4.38, 4.112 SUB ISIA 208 M H 10.94 SUB 2A 195 4.61
SU 178 2T 1953FV 8.65 SU 88 72 208 H 10.74 SUB ISIA 208 MD 4.113 SUB 2A 195 1 4.61
SU 178 2T 208 4.37 SU 88 72 208 V 10.128 SUB ISIA 208 MDV 10.178 SUB 2A 195 1 D 4.61
SU 178 2T 208 1 4.38 SU 88 72 221 4.18, 4.98 SUB ISIA 208 MV 10.178 SUB 2A 195 1 DV 10.146
SU 178 2T 208 1 V 10.127 SU 88 72 221 H 10.69 SUB ISIA 221 2 4.20 SUB 2A 195 1 V 10.146
SU 178 2T 208 2 4.38 SU 88 72 221 V 10.112 SUB ISIA 221 2 D 4.20 SUB 2A 195 D 4.61
SU 178 2T 208 2 V 10.128 SU 88 88 195 4.59, 4.126 SUB ISIA 221 2 DV 10.114 SUB 2A 195 H 10.79, 8.83
SU 178 2T 208 3 4.37 SU 88 88 195 V 10.144 SUB ISIA 221 2 H 10.69 SUB 2A 195 M 4.127
SU 178 2T 208 3 V 10.127 SU 88 88 208 4.39 SUB ISIA 221 2 V 10.114 SUB 2A 195 M H 10.99
SU 178 2T 208 8 4.112 SU 88 88 208 8 4.112 SUB ISIA 221 M 4.99 SUB 2A 195 MD 4.127
SU 178 2T 208 8 V 10.177 SU 88 88 208 V 10.128 SUB ISIA 221 M H 10.89 SUB 2A 195 MDV 10.186
SU 178 2T 208 M 4.112 SU 88 88 221 4.19 SUB ISIA 221 MD 4.99 SUB 2A 195 MV 10.186
SU 178 2T 208 MV 10.176 SU 88 88 221 M 4.98 SUB ISIA 221 MDV 10.169 SUB 2A 208 4.41
SU 178 2T 208 V 10.126 SU 88 88 221 MV 10.168 SUB ISIA 221 MV 10.169 SUB 2A 208 1 4.41
SU 178 2T 221 4.17, 4.98 SU 88 88 221 V 10.112 SUB 102 195 4.60 SUB 2A 208 1 D 4.41
SU 178 2T 221 1 4.17 SU 88 A 130 4.82 SUB 102 195 D 4.60 SUB 2A 208 1 DV 10.130
SU 178 2T 221 1 V 10.110 SU 88 A 130 M 4.142 SUB 102 195 DV 10.145 SUB 2A 208 1 H 10.75, 8.85
SU 178 2T 221 2 4.17 SU 88 A 130 MV 10.196 SUB 102 195 V 10.145 SUB 2A 208 1 V 10.130
SU 178 2T 221 2 V 10.111 SU 88 A 130 V 10.160 SUB 102 208 4.40 SUB 2A 208 D 4.41
SU 178 2T 221 3 4.18 SU 88 ISIA 195 4.53 SUB 102 208 D 4.40 SUB 2A 208 M 4.114
SU 178 2T 221 3 V 10.111 SU 88 ISIA 195 H 10.77 SUB 102 208 DV 10.129 SUB 2A 208 M H 10.95
SU 178 2T 221 4 4.18 SU 88 ISIA 195 M 4.123 SUB 102 208 V 10.129 SUB 2A 208 MD 4.114
SU 178 2T 221 4 V 10.112 SU 88 ISIA 195 M H 10.97 SUB 102 221 4.19 SUB 2A 208 MDV 10.177
SU 178 2T 221 M 4.98 SU 88 ISIA 195 MV 10.183 SUB 102 221 D 4.19 SUB 2A 208 MV 10.177
SU 178 2T 221 MV 10.167 SU 88 ISIA 195 V 10.138 SUB 102 221 DV 10.113 SUB 2A 221 4.21
SU 178 2T 221 V 10.111 SU 88 ISIA 208 4.33 SUB 102 221 V 10.113 SUB 2A 221 1 4.21
SU 88 130 4.142 SU 88 ISIA 208 H 10.72 SUB 130 4.83 SUB 2A 221 1 D 4.21
a.12
SUB 2A 221 1 DV 10.114 SULB 195 D 4.64 SUM 195 DV 10.145 SUMB A 221 H 10.70
SUB 2A 221 1 H 10.70 SULB 195 DV 10.149 SUM 195 V 10.145 SUMB A 221 M H 10.90
SUB 2A 221 1 V 10.114 SULB 195 F 8.64 SUM 208 4.40, 4.113 SUMB S 130 4.84, 4.143
SUB 2A 221 D 4.21 SULB 195 FV 8.64 SUM 208 D 4.40, 4.113 SUMB S 130 V 10.162, 10.197
SUB 2A 221 M 4.100 SULB 195 M 4.129 SUM 208 DV 10.129 SUMB SA 156 M 4.137
SUB 2A 221 M H 10.90 SULB 195 MD 4.129 SUM 208 V 10.129 SUMB SA 156 MV 10.193
SUB 2A 221 MD 4.100 SULB 195 MDV 10.188 SUM 221 4.20, 4.99 SUMB SA 195 4.63
SUB 2A 221 MDV 10.168 SULB 195 MV 10.188 SUM 221 D 4.20, 4.99 SUMB SA 195 D 4.63
SUB 2A 221 MV 10.168 SULB 195 V 10.149 SUM 221 DV 10.113 SUMB SA 195 DV 10.148
SUB 2SA 130 4.84 SULB 208 4.44 SUM 221 V 10.113 SUMB SA 195 M 4.128
SUB 2SA 130 V 10.161 SULB 208 D 4.44 SUM 2A 130 4.83 SUMB SA 195 MD 4.128
SUB 3A 156 4.75 SULB 208 DV 10.133 SUM 2A 130 H 10.83 SUMB SA 195 MDV 10.187
SUB 3A 156 V 10.156 SULB 208 M 4.115 SUM 2A 130 M H 10.102 SUMB SA 195 MV 10.187
SUB 88 156 4.74, 4.136 SULB 208 MD 4.115 SUM 2A 130 V 10.161 SUMB SA 195 V 10.148
SUB 88 156 V 10.155, 10.192 SULB 208 MDV 10.179 SUM 2SA 130 H 10.83 SUMB SA 208 4.43
SUB 88 195 4.59, 4.126 SULB 208 MV 10.179 SUM 3A 156 4.74 SUMB SA 208 D 4.43
SUB 88 195 D 4.59, 4.126 SULB 208 V 10.133 SUM 3A 156 V 10.156 SUMB SA 208 DV 10.132
SUB 88 195 DV 10.144 SULB 221 4.23 SUM S2A 130 4.83 SUMB SA 208 M 4.115
SUB 88 195 V 10.144 SULB 221 D 4.23 SUM S2A 195 H 10.80 SUMB SA 208 MD 4.115
SUB 88 208 4.39, 4.113 SULB 221 DV 10.117 SUM S2A 208 H 10.75 SUMB SA 208 MDV 10.179
SUB 88 208 D 4.39, 4.113 SULB 221 M 4.101 SUM S2A 221 H 10.70 SUMB SA 208 MV 10.179
SUB 88 208 DV 10.129 SULB 221 MD 4.101 SUMB 195 4.63 SUMB SA 208 V 10.132
SUB 88 208 V 10.129 SULB 221 MDV 10.170 SUMB 195 D 4.63 SUMB SA 221 4.23
SUB 88 221 4.19, 4.99 SULB 221 MV 10.170 SUMB 195 DV 10.148 SUMB SA 221 D 4.23
SUB 88 221 D 4.19, 4.99 SULB 221 V 10.117 SUMB 195 M 4.128 SUMB SA 221 DV 10.116
SUB 88 221 DV 10.113 SULB 2A 156 4.76 SUMB 195 MD 4.128 SUMB SA 221 M 4.101
SUB 88 221 V 10.113 SULB 2A 156 D 4.76 SUMB 195 MDV 10.187 SUMB SA 221 MD 4.101
SUB S 156 4.75 SULB 2A 156 DV 10.157 SUMB 195 MV 10.187 SUMB SA 221 MDV 10.170
SUB S 156 M 4.136 SULB 2A 156 V 10.157 SUMB 195 V 10.148 SUMB SA 221 MV 10.170
SUB S 156 MV 10.193 SULB 2A 195 4.64 SUMB 208 4.43 SUMB SA 221 V 10.116
SUB S 156 V 10.156 SULB 2A 195 D 4.64 SUMB 208 D 4.43 SUMK 130 4.83
SUB S 195 2 M H 10.99 SULB 2A 195 DV 10.148 SUMB 208 DV 10.132 SUMK 130 V 10.160
SUB S 208 2 M H 10.94 SULB 2A 195 M 4.129 SUMB 208 M 4.115 SUMK 3A 156 4.74
SUB S 221 M H 10.90 SULB 2A 195 MD 4.129 SUMB 208 MD 4.115 SUMK 3A 156 V 10.156
SUB S2A 156 M 4.136 SULB 2A 195 MDV 10.188 SUMB 208 MDV 10.178 SUMK S 2A 130 4.83
SUB S2A 156 MV 10.193 SULB 2A 195 MV 10.188 SUMB 208 MV 10.178 SUMK S 2A 130 V 10.161
SUB S2A 195 4.61 SULB 2A 195 V 10.148 SUMB 208 V 10.132 SUMKB 195 4.63
SUB S2A 195 1M 4.127 SULB 2A 208 4.44 SUMB 221 4.24 SUMKB 195 D 4.63
SUB S2A 195 1MD 4.127 SULB 2A 208 D 4.44 SUMB 221 D 4.24 SUMKB 195 DV 10.147
SUB S2A 195 1MDV 10.186 SULB 2A 208 DV 10.133 SUMB 221 DV 10.116 SUMKB 195 M 4.128
SUB S2A 195 1MV 10.186 SULB 2A 208 M 4.116 SUMB 221 M 4.101 SUMKB 195 MD 4.128
SUB S2A 195 D 4.61 SULB 2A 208 MD 4.116 SUMB 221 MD 4.101 SUMKB 195 MDV 10.186
SUB S2A 195 DV 10.146 SULB 2A 208 MDV 10.179 SUMB 221 MDV 10.169 SUMKB 195 MV 10.186
SUB S2A 195 M H 10.99 SULB 2A 208 MV 10.179 SUMB 221 MV 10.169 SUMKB 195 V 10.147
SUB S2A 195 V 10.146 SULB 2A 208 V 10.133 SUMB 221 V 10.116 SUMKB 208 4.43
SUB S2A 208 4.41 SULB 2A 221 4.23 SUMB 2A 195 4.63 SUMKB 208 D 4.43
SUB S2A 208 1 M H 10.95 SULB 2A 221 D 4.23 SUMB 2A 195 D 4.63 SUMKB 208 DV 10.132
SUB S2A 208 1M 4.114 SULB 2A 221 DV 10.117 SUMB 2A 195 DV 10.148 SUMKB 208 M 4.114
SUB S2A 208 1MD 4.114 SULB 2A 221 M 4.102 SUMB 2A 195 M 4.129 SUMKB 208 MD 4.114
SUB S2A 208 1MDV 10.177 SULB 2A 221 MD 4.102 SUMB 2A 195 MD 4.129 SUMKB 208 MDV 10.178
SUB S2A 208 1MV 10.177 SULB 2A 221 MDV 10.170 SUMB 2A 195 MDV 10.187 SUMKB 208 MV 10.178
SUB S2A 208 D 4.41 SULB 2A 221 MV 10.170 SUMB 2A 195 MV 10.187 SUMKB 208 V 10.132
SUB S2A 208 DV 10.130 SULB 2A 221 V 10.117 SUMB 2A 195 V 10.148 SUMKB 221 4.23
SUB S2A 208 V 10.130 SULB SA 156 4.76 SUMB 2A 208 4.43 SUMKB 221 D 4.23
SUB S2A 221 4.21 SULB SA 156 DV 10.157 SUMB 2A 208 D 4.43 SUMKB 221 DV 10.116
SUB S2A 221 1M 4.100 SULB SA 156 M 4.137 SUMB 2A 208 DV 10.132 SUMKB 221 M 4.100
SUB S2A 221 1MD 4.100 SULB SA 156 MV 10.193 SUMB 2A 208 M 4.115 SUMKB 221 MD 4.100
SUB S2A 221 1MDV 10.168 SULB SA 156 V 10.157 SUMB 2A 208 MD 4.115 SUMKB 221 MDV 10.169
SUB S2A 221 1MV 10.168 SUM 102 156 4.74 SUMB 2A 208 MDV 10.179 SUMKB 221 MV 10.169
SUB S2A 221 D 4.21 SUM 102 156 V 10.155 SUMB 2A 208 MV 10.179 SUMKB 221 V 10.116
SUB S2A 221 DV 10.114 SUM 102 195 4 4.59 SUMB 2A 208 V 10.132 SUMKB 2A 156 4.75
SUB S2A 221 M H 10.90 SUM 102 195 4 D 4.59 SUMB 2A 221 4.24 SUMKB 2A 156 V 10.157
SUB S2A 221 V 10.114 SUM 102 195 4 DV 10.145 SUMB 2A 221 D 4.24 SUMKB 2A 195 4.62
SUB SA 130 H 10.83 SUM 102 195 4 V 10.145 SUMB 2A 221 DV 10.116 SUMKB 2A 195 D 4.62
SUG 2A 130 4.84 SUM 102 208 5 4.39 SUMB 2A 221 M 4.101 SUMKB 2A 195 DV 10.147
SUG 2A 130 F 8.67 SUM 102 208 5 D 4.39 SUMB 2A 221 MD 4.101 SUMKB 2A 195 M 4.128
SUG 2A 130 M 4.144 SUM 102 208 5 DV 10.129 SUMB 2A 221 MDV 10.170 SUMKB 2A 195 MD 4.128
SUG 2A 130 X 4.85, 4.144 SUM 102 208 5 V 10.129 SUMB 2A 221 MV 10.170 SUMKB 2A 195 MDV 10.187
SUG 2A 130 XF 8.67 SUM 102 221 4 4.20 SUMB 2A 221 V 10.116 SUMKB 2A 195 MV 10.187
SUG A 104 4.85 SUM 102 221 4 D 4.20 SUMB A 156 4.75 SUMKB 2A 195 V 10.147
SUG A 104 M 4.144 SUM 102 221 4 DV 10.113 SUMB A 156 V 10.157 SUMKB 2A 208 4.42
SUG A 104 X 4.86, 4.144 SUM 102 221 4 V 10.113 SUMB A 195 F 8.64 SUMKB 2A 208 D 4.42
SUG A 117 4.85 SUM 130 4.83 SUMB A 195 FV 8.64 SUMKB 2A 208 DV 10.131
SUG A 117 X 4.85 SUM 130 H 10.83 SUMB A 195 H 10.80, 8.83 SUMKB 2A 208 M 4.114
SUG A 130 H 10.83 SUM 130 V 10.161 SUMB A 195 M H 10.100 SUMKB 2A 208 MD 4.114
SUG A 130 M H 10.102 SUM 195 4.60, 4.127 SUMB A 208 H 10.76, 8.85 SUMKB 2A 208 MDV 10.178
SULB 195 4.64 SUM 195 D 4.60, 4.127 SUMB A 208 M H 10.95 SUMKB 2A 208 MV 10.178
a.13
U U2A 120 72
U2A 120 72 H
2.38
10.37
U2AIS 80 72 H
U2AIS 80 H
10.37
10.23, 8.81
U3SA 40 72
U3SA 45
2.37
2.08
U 100 2.05 U2A 120 H 10.23, 8.81 U2AIS 90 2.09 U3SA 45 7 2.08
U 100 2 2.05 U2A 30 2.09 U2AIS 90 72 2.38 U3SA 45 72 2.37
U 100 72 2.35 U2A 30 7 2.09 U2AIS 90 72 H 10.37 U3SA 50 2.08
U 100 72 2 2.35 U2A 30 7 H 10.23 U2AIS 90 H 10.23, 8.81 U3SA 50 7 2.08
U 100 72 H 10.35 U2A 30 72 2.38 U2S2A 100 2.08 U3SA 50 72 2.37
U 100 H 10.21 U2A 30 72 H 10.37 U2S2A 100 7 2.08 U3SA 60 2.08
U 120 2.05 U2A 30 H 10.23, 8.81 U2S2A 120 2.08 U3SA 60 7 2.08
U 120 2 2.05 U2A 40 2.09 U2S2A 30 2.08 U3SA 60 72 2.37
U 120 72 2.35 U2A 40 7 2.09 U2S2A 30 7 2.08 U3SA 80 2.08
U 120 72 2 2.35 U2A 40 7 H 10.23 U2S2A 40 2.08 U3SA 80 72 2.37
U 120 72 H 10.35 U2A 40 72 2.38 U2S2A 40 7 2.08 U3SA 90 2.08
U 120 H 10.21 U2A 40 72 H 10.37 U2S2A 45 2.08 U3SA 90 72 2.37
U 30 2.05 U2A 40 H 10.23, 8.81 U2S2A 45 7 2.08 U6S 30 2.08
U 30 2 2.05 U2A 45 2.09 U2S2A 50 2.08 U6S 40 2.08
U 30 4 2.05 U2A 45 7 2.09 U2S2A 50 7 2.08 U6S 45 2.08
U 30 4 2 2.05 U2A 45 7 H 10.23 U2S2A 60 2.08 U6S 50 2.08
U 30 72 2.35 U2A 45 72 2.38 U2S2A 60 7 2.08 U6S 60 2.08
U 30 72 2 2.35 U2A 45 72 H 10.37 U2S2A 80 2.08 UA 100 33 2.43
U 30 72 H 10.35 U2A 45 H 10.23, 8.81 U2S2A 80 7 2.08 UA 100 36 H 10.45
U 30 H 10.21 U2A 50 2.09 U2S2A 90 2.08 UA 100 39 2.19
U 40 2.05 U2A 50 7 2.09 U2S2A 90 7 2.08 UA 100 39 F 8.58
U 40 2 2.05 U2A 50 7 H 10.23 U2SA 100 7 H 10.23 UA 100 39 FH 8.61
U 40 4 2.05 U2A 50 72 2.38 U2SA 100 72 H 10.37 UA 100 39 H 10.32
U 40 4 2 2.05 U2A 50 72 H 10.37 U2SA 100 H 10.23 UA 120 33 2.43
U 40 72 2.35 U2A 50 H 10.23, 8.81 U2SA 120 72 H 10.37 UA 120 36 H 10.45
U 40 72 2 2.35 U2A 60 2.09 U2SA 120 H 10.23 UA 120 39 2.19
U 40 72 H 10.35 U2A 60 7 2.09 U2SA 30 7 H 10.23 UA 120 39 F 8.58
U 40 H 10.21 U2A 60 7 H 10.23 U2SA 30 72 H 10.37 UA 120 39 FH 8.61
U 45 2.05 U2A 60 72 2.38 U2SA 30 H 10.23 UA 120 39 H 10.32
U 45 2 2.05 U2A 60 72 H 10.37 U2SA 40 7 H 10.23 UA 15 72 A 2.35
U 45 4 2.05 U2A 60 H 10.23, 8.81 U2SA 40 72 H 10.37 UA 15 72 HA 10.35
U 45 4 2 2.05 U2A 80 2.09 U2SA 40 H 10.23 UA 15 A 2.05, 8.36
U 45 72 2.35 U2A 80 7 2.09 U2SA 45 7 H 10.23 UA 15 HA 10.21
U 45 72 2 2.35 U2A 80 7 H 10.23 U2SA 45 72 H 10.37 UA 30 2.06
a.14
a.15
a.16
a.17
ZBI 80 RE 9.04 ZBZ 322 RE 9.06 ZIB 60 A 8.39, 9.15 ZIM 9046 AG 9.13
ZBI 801 AG 9.11 ZBZ 332 RE 9.07 ZIB 60 W 8.39, 9.15 ZIM 906 AG 9.13
ZBI 90 KE 9.07 ZBZ 4 KE 9.09 ZID 25 G 9.17 ZIM 906 AN 9.12
ZBI 90 RE 9.04 ZBZ 4 RE 9.07 ZID 29 AG 9.14 ZIM 9067 AG 9.13
ZBI 901 AG 9.11 ZBZ 41 KE 9.09 ZIK 45 9.14 ZIM 9067 AN 9.12
ZBI1001AG 9.11 ZBZ 47 KE 9.09 ZIM 100 7 AN 9.12 ZIS 1005 AG 9.15
ZBL 100 7 RE 9.06 ZBZ 47 RE 9.07 ZIM 100 AN 9.12 ZIS 1006 AG 9.15
ZBL 100 KE 9.09 ZBZ 5 EN 9.01 ZIM 100 BG 9.13 ZIS 1205 AG 9.15
ZBL 100 RE 9.06 ZBZ 6 EN 9.02 ZIM 1006 AG 9.13 ZIS 1206 AG 9.15
ZBL 1007 KE 9.09 ZD 10 9.63 ZIM 1006 AN 9.12 ZIS 3015 AG 9.15
ZBL 120 KE 9.09 ZD 11 9.63 ZIM 1007 BG 9.13 ZIS 305 AG 9.15
ZBL 120 RE 9.06 ZD 12 9.63 ZIM 1067 AG 9.13 ZIS 306 AG 9.15
ZBL 60 7 RE 9.06 ZD 13 9.63 ZIM 1067 AN 9.12 ZIS 405 AG 9.15
ZBL 60 KE 9.09 ZD 14 9.63 ZIM 1106 AG 9.13 ZIS 406 AG 9.15
ZBL 60 RE 9.06 ZD 16 9.63 ZIM 1156 AG 9.13 ZIS 4515 AG 9.15
ZBL 607 KE 9.09 ZD 17 9.63 ZIM 120 AN 9.12 ZIS 455 AG 9.15
ZBL 80 7 RE 9.06 ZD 18 9.63 ZIM 120 BG 9.13 ZIS 456 AG 9.15
ZBL 80 KE 9.09 ZD 19 9.63 ZIM 1206 AG 9.13 ZIS 5015 AG 9.15
ZBL 80 RE 9.06 ZD 9 9.63 ZIM 1206 AN 9.12 ZIS 505 AG 9.15
ZBL 807 KE 9.09 ZDS 1 9.63 ZIM 1256 AG 9.13 ZIS 506 AG 9.15
ZBL 90 7 RE 9.06 ZDS 2 9.63 ZIM 30 7 BG 9.13 ZIS 6015 AG 9.15
ZBL 90 KE 9.09 ZDS 3 9.63 ZIM 30 AN 9.12 ZIS 605 AG 9.15
ZBL 90 RE 9.06 ZDS 4 9.63 ZIM 30 BG 9.13 ZIS 606 AG 9.15
ZBL 907 KE 9.09 ZDS 5 9.63 ZIM 303 BG 9.13 ZIS 805 AG 9.15
ZBM 30 AG 9.11 ZDS 6 9.63 ZIM 306 AG 9.13 ZIS 806 AG 9.15
ZBM 40 AG 9.11 ZF 109 E 9.59 ZIM 306 AN 9.12 ZIS 905 AG 9.15
ZBM 45 AG 9.11 ZF 109 S 9.59 ZIM 3064 AG 9.13 ZIS 906 AG 9.15
ZBM 50 AG 9.11 ZF 18 C 9.60 ZIM 3064 AN 9.12 ZIT 90 E 9.14
ZBM 60 AG 9.11 ZF 18 E 9.60 ZIM 3067 AG 9.13 ZIW 1 9.15
ZBM 90 AG 9.11 ZF 18 S 9.60 ZIM 40 7 BG 9.13 ZIZ 1 AG 9.16
ZBO 100 AG 9.12 ZF 47 E 9.60 ZIM 40 AN 9.12 ZIZ 6 AG 9.16
ZBO 1006 AG 9.12 ZF 47 S 9.60 ZIM 40 BG 9.13 ZL 1205 E 9.25
ZBO 120 AG 9.12 ZF 70 E 9.59 ZIM 406 AG 9.13 ZL 455 E 9.25
ZBO 1206 AG 9.12 ZF 70 S 9.59 ZIM 406 AN 9.12 ZL 55 E 10.20, 9.23
ZBO 30 AG 9.12 ZF 8135 E 9.59 ZIM 4067 AG 9.13 ZL 604 E 9.25
ZBO 306 AG 9.12 ZF 8160 E 9.59 ZIM 45 7 BG 9.13 ZL 605 E 9.25
ZBO 33 9.14 ZF 83 E 9.59 ZIM 45 AN 9.12 ZL 78 E 10.20, 9.23
ZBO 40 AG 9.12 ZF 83 S 9.59 ZIM 45 BG 9.13 ZL 79 E 9.24
ZBO 406 AG 9.12 ZF 8935 E 9.59 ZIM 453 BG 9.13 ZL 84 SW 10.20, 9.23
ZBO 45 AG 9.12 ZF 8960 E 9.59 ZIM 456 AG 9.13 ZL 904 E 9.25
ZBO 456 AG 9.12 ZFB 7200 E 9.59 ZIM 456 AN 9.12 ZL 905 E 9.25
ZBO 50 AG 9.12 ZFT 7200 E 9.59 ZIM 4564 AG 9.13 ZLA 1 9.25
ZBO 506 AG 9.12 ZG 1 9.19 ZIM 4564 AN 9.12 ZLH 3 9.26
ZBO 60 AG 9.12 ZI 1 9.17 ZIM 4567 AG 9.13 ZLI 1007 E 9.26
ZBO 606 AG 9.12 ZI 10 9.17 ZIM 50 7 BG 9.13 ZLI 1207 E 9.26
ZBO 80 AG 9.12 ZI 11 9.17 ZIM 50 AN 9.12 ZLI 307 E 9.26
ZBO 806 AG 9.12 ZI 13 9.18 ZIM 50 BG 9.13 ZLI 407 E 9.26
ZBO 90 AG 9.12 ZI 14 9.18 ZIM 503 BG 9.13 ZLI 457 E 9.26
ZBO 906 AG 9.12 ZI 15 9.17 ZIM 506 AG 9.13 ZLI 50 G 10.19, 9.22
ZBS 100 EN 9.03 ZI 16 9.17 ZIM 506 AN 9.12 ZLI 501 IC 10.19, 9.22
ZBS 120 EN 9.04 ZI 17 9.17 ZIM 5064 AG 9.13 ZLI 507 E 9.26
ZBS 3 AG 9.14 ZI 18 9.18 ZIM 5064 AN 9.12 ZLI 607 E 9.26
ZBS 30 EN 9.02 ZI 19 9.18 ZIM 5067 AG 9.13 ZLI 807 E 9.26
ZBS 40 EN 9.02 ZI 2 AG 9.16 ZIM 60 7 AN 9.12 ZLI 907 E 9.26
ZBS 45 EN 9.02 ZI 3 AG 9.16 ZIM 60 7 BG 9.13 ZLL 100 A 10.19, 9.21
ZBS 50 EN 9.03 ZI 3 G 9.64 ZIM 60 AN 9.12 ZLL 100 IC 10.19, 9.21
ZBS 60 EN 9.03 ZI 3 W 9.64 ZIM 60 BG 9.13 ZLL 120 A 10.19, 9.21
ZBS 601 AG 9.10 ZI 30 AG 9.16 ZIM 603 BG 9.13 ZLL 120 IC 10.19, 9.21
ZBS 602 AG 9.10 ZI 3011 AG 9.16 ZIM 606 AG 9.13 ZLL 30 A 10.19, 9.21
ZBS 80 EN 9.03 ZI 3012 AG 9.16 ZIM 606 AN 9.12 ZLL 30 IC 10.19, 9.21
ZBS 90 EN 9.03 ZI 31 9.17 ZIM 6064 AG 9.13 ZLL 40 A 10.19, 9.21
ZBS 901 AG 9.10 ZI 6 SG 9.14 ZIM 6064 AN 9.12 ZLL 40 IC 10.19, 9.21
ZBS 902 AG 9.10 ZI 30 11 AG 10.22, 10.36, 2.06, 2.36 ZIM 6067 AG 9.13 ZLL 45 A 10.19, 9.21
ZBZ 1 EN 9.01 ZI 30 12 AG 10.22, 10.36, 2.06, 2.36 ZIM 6067 AN 9.12 ZLL 45 IC 10.19, 9.21
ZBZ 12 RE 9.06 ZI 30 AG 10.22, 10.36, 2.06, 2.36 ZIM 80 7 AN 9.12 ZLL 50 A 10.19, 9.21
ZBZ 13 KE 9.09 ZIA 303 AG 9.15 ZIM 80 7 BG 9.13 ZLL 50 IC 10.19, 9.21
ZBZ 13 RE 9.07 ZIA 305 AG 9.15 ZIM 80 AN 9.12 ZLL 55 A 10.19, 9.21
ZBZ 18 RE 9.07 ZIA 306 AG 9.15 ZIM 80 BG 9.13 ZLL 55 IC 10.19, 9.21
ZBZ 19 KE 9.09 ZIA 453 AG 9.15 ZIM 8046 AG 9.13 ZLL 60 A 10.19, 9.21
ZBZ 19 RE 9.07 ZIA 455 AG 9.15 ZIM 806 AG 9.13 ZLL 60 IC 10.19, 9.21
ZBZ 190 E 9.07 ZIA 456 AG 9.15 ZIM 806 AN 9.12 ZLL 80 A 10.19, 9.21
ZBZ 2 9.11 ZIA 503 AG 9.15 ZIM 8067 AG 9.13 ZLL 80 IC 10.19, 9.21
ZBZ 2 E 9.06 ZIA 505 AG 9.15 ZIM 8067 AN 9.12 ZLL 90 A 10.19, 9.21
ZBZ 2 EN 9.01 ZIA 506 AG 9.15 ZIM 90 7 AN 9.12 ZLL 90 IC 10.19, 9.21
ZBZ 232 RE 9.06 ZIA 603 AG 9.15 ZIM 90 7 BG 9.13 ZLN 1002 A 9.22
ZBZ 3 EN 9.01 ZIA 605 AG 9.15 ZIM 90 AN 9.12 ZLN 302 A 9.22
ZBZ 31 E 9.06, 9.09 ZIA 606 AG 9.15 ZIM 90 BG 9.13 ZLN 402 A 9.22
a.18
a.19
Accessories
Accessories for combined
2.01, 4.01
10.84, 4.25, 4.27
Deep drawer
Deep drawer for bottle unit
8.114-8.116
8.116
i
Bow-end base shelf unit 8.86 iMove wall unit 3.15, 3.23
sealer strip 6.16, 6.31 Deep drawer for sink base unit 8.115-8.116 Infill panel for base units 10.01-10.02,
Bow-end base unit 8.79
Accessories for sealer strip for Deep drawer front 8.103-8.107 10.29, 10.32
Bow-end infill panel 8.79
niche back panel 6.31 Description of special models 8.98 Infill panel for dresser units 3.49-3.50
Bow-end wall shelf unit 8.87
Accessories for snap-on Desk panel 10.01-10.04 Infill panel for sink unit 8.102
Built-under drawer 2.09
cover profile 6.16, 6.31 Desk panel for base unit 5.15 Infill panel for tall unit 4.67, 4.132
Accessories set for mini sealer strip
Accessories set for standard
6.16 C Desk panel for tall unit
Desk worktop for base units
10.05-10.14
6.05
Infill panel for tall unit side 4.138
Carcase material 8.98-8.99 Infill panel for tall units 10.05-10.06,
worktop sealer strip 6.15 Ceiling infill for corner unit 7.08 Desk worktop for free-standing planning 6.05 10.06-10.08
Additional charge 10.15 Ceiling infill panel 7.08 Desk worktop for tall units 6.05 Infill panel for wall units 10.03-10.04,
Additional charge flush-mounted sink 6.21 Ceiling infill panel for angled Display base unit with unit door 2.53 10.49, 10.53, 10.58
Additional charge for tall end shelf 7.08 Display unit 01, 10.01-10.02, Inset sink 6.24
cable drillings 10.18, 8.68 Ceiling infill panel for angled 10.21, 10.35, 2.29 Installation accessories 6.10, 6.14
ALPHA interior equipment 10.15 wall end shelf 7.08 Display unit door 8.110 Installation accessories for
Altered plinth height 7.02, 7.04 Ceiling infill panel return 7.08 Display unit glass door 8.107-8.108, 8.110 free-hanging wall units 8.69
Angled cut 6.20 Ceiling infill panels 7.08 Display unit segmented Island cooker hood 8.04
Angled cut for Ceramic Ceramic niche back panel 6.22 glass door 8.108, 8.110 Island end unit 8.14
niche back panel 6.22 Ceramic worktop 6.20 Display unit with glass door 2.29, 2.31, 2.53 Island extractor hood for ALNOCERA 3.50
Angled cut for corner connection 6.20 Colour finishes country-house Display unit with ribbed glass door 8.16
Angled cut for NG V 6.30 style antico 8.03 Display unit with segment door 2.29, 2.31 L
Angled cut with edging 5.18-5.19, Combined sealer strip 6.16, 6.31 Display unit with sliding door 2.30-2.31, 2.53 Larder unit pull-out front 8.111-8.112
6.06, 6.11, 6.14 Complete unit interior 8.98 Distance strip 8.99 Larder unit pull-out front dowelled 8.113
Angled open end shelf 3.12, 3.19, Cooker hood 3.50, 8.03-8.04 Door panel lacquered 8.101 LED built-in light 10.19-10.20
3.27, 3.32, 3.37, 8.13 Corner back panel 6.32 Door panel without edges 8.101 LED built-in light linear 10.19
Arena shelf for pull-out Corner back panel for Door panel, glass and stone 8.101 LED recessed grip lighting 01-02
larder unit 10.22, 10.36, cooker hoods 6.32 Doubling for glass niche back panel 6.29 LED recessed light with colour control 10.18
2.06, 2.36 Corner base unit 10.01-10.02, Drawer 8.113-8.114 Lift-up door 8.103, 8.103, 8.106
Drawer for hob units 8.114
B Corner connection
10.24, 10.37-10.38
6.10, 6.13, 6.20 Drawer front 8.102
Light baffle
Light sail set
7.05-7.06, 8.07
8.92
Back panel 10.33, 10.46, Dresser unit 3.45-3.47, Limiter for hinges 4.01
Corner cutout 6.20
10.85, 2.32-2.33 4.86-4.89, 8.38 linear LED recessed light with colour control
Corner cutout for Ceramic
Back wall and side cladding 2.34, 2.56 Dresser unit for built-in appliance 4.87-4.89 10.19
niche back panel 6.22
Baking tin pull-out 8.116 Dresser unit with slats and
Bar top 6.02, 6.04
Corner cut-out for NG V
Corner cutout or slanted
6.30
electrically assisted opening 3.47-3.48 M
Base end shelf unit 2.17, 2.20, 2.45, 8.04 Drill hole in NG V 6.30 Magnetic safety lock (child safety) 4.01
cut without edging 5.18-5.19,
Base end shelf unit, angled 2.17, 2.44 drilling in the niche back panel MARECUCINA plinth element for
6.06, 6.12, 6.15
Base shelf unit 2.17, 2.44, 8.03 in ceramic 6.23 rounded modular panel 8.90
Corner cutout with edging 5.18-5.19, 6.06,
Base shelf unit for bottles and scoops 2.44 MARECUCINA plinth element for
Base unit 10.01-10.02,
Corner infill panel
6.11, 6.14
10.01-10.02,
E stern-end base unit in row 8.90
10.21-10.23, 10.32 Edging material 8.99 MARECUCINA plinth element for
10.24, 10.38
Base unit door 8.104-8.107 Electric opening aid 4.01 stern-end base units in island 8.90
Corner infill panel for base units 10.29,
Base unit for built-in appliances 2.21 ELITE interior equipment 10.15 Mat anthracite 10.15
10.32, 10.43, 10.45
Base unit for built-under oven 10.01-10.02, End panel for pocket door 8.31 metal frame shelf for units 3.37-3.38
Corner infill panel for tall units 10.71,
10.24, 10.38, 2.21 End-of-row unit 8.14 Metal support 5.21
10.76, 10.81-10.82, 10.84
Base unit for fixed tables 2.09 Extendable shelf board 8.39 Mini sealer strip 6.16
Corner infill panel for wall units 10.49,
Base unit for hob 2.22-2.23, 2.47, 8.59
Base unit for hob or
Corner sink base unit
10.53, 10.58, 3.10-3.11
10.01-10.02,
F Modern cornice
Modular panel
7.06
10.207-10.208, 5.12-5.13
induction hob 10.01-10.02, Finished edges for Ceramic 6.20 Modular panel for base unit 10.01-10.02,
10.26, 10.39, 2.24
10.25, 10.38, 2.22 Flap door 8.103 10.199, 10.201
Corner storage unit 4.12, 4.32,
Base unit for hob with integrated Flyover shelf 7.07 Modular panel for tall unit 10.05-10.14,
4.52, 4.94, 4.108
control panel 2.47 Flyover shelf for cornice 7.07 10.199, 10.201-10.202
Corner tall unit 10.06, 10.08, 10.10-10.11
Base unit for induction hob 2.22-2.23, Franke inset sink 6.24-6.25 Modular panel for wall unit 10.03-10.04,
Corner wall unit 10.03-10.04,
2.47, 8.60 Front material, with edging all-round 8.101 10.199, 10.201, 10.204
10.48, 10.52, 10.57
Base unit for provisions 10.23, Front panel 10.01, Modular panel rounded 8.89
Corner worktop 6.01-6.03,
10.36, 2.06, 2.36, 8.36 10.28-10.29, 10.42 Modular panels 50 mm 5.12
6.10-6.11, 6.13
Base unit for retractable or Front panel for Airforce extractor hood 3.43 Module carcase for tall unit 8.41
Cornice 7.07, 8.07
hob-level extractor 10.01-10.02, Front panel for integrated extractor 3.42 Module deep drawer 8.42
Cover panel 5.20
10.25, 10.39 Front plinth panel for 3-D units 7.01, 7.03 Module door 8.42-8.45
Cushioned self closing action 4.01
Base unit for towels
Base unit for trays and baking tins
2.05, 2.35
10.21,
Cutout for built-under sink
Cutout for ceramic niches
6.21
6.22
G Module drawer
Module flap door
8.42
8.46
10.35, 2.05, 2.35 Glass lift-up door 8.104, 8.106
Cutout for double socket for Module niche 8.47
Base unit for waste separation system 8.59, Glass niche back panel 6.28-6.29
Ceramic niche back panel 6.22 Module open niche 8.47
8.62 Glass niche back panel ALNO gallery 6.29
Cutout for double socket for NG V 6.30 Module parallel lift-up door 8.47
Base unit with Glass niche back panel with motif 6.28
Cutout for flush-mounted sink and hob 6.21 Module upward folding door 8.46
interior deep drawers 10.01-10.02, Glass shelves 8.100
10.22, 10.36, 2.07
Cutout for NG V
Cutout for switch/socket for
6.30
H N
Base unit with interior drawer 10.23, Niche back panel 6.27
Ceramic niche back panel 6.22 Heat-protection shelf 2.22
10.37, 2.07, 2.37 Niche back panel acrylique 6.27
Cutout for switch/socket for NG V 6.30 Height and depth adjustable
Base unit with interior drawers 10.01-10.02,
10.23, 10.37, 2.07
Cutout for top-mounted hob and sink
Cutout for triple socket for
6.21 modular panel 10.199,
10.199-10.200, 10.202
O
Base unit with pull-out table 2.10, 2.38, 8.36 Orgaset 1 for pull-out larder unit 10.22, 10.36,
Ceramic niche back panel 6.22 Height- and depth-variable
Bevel cut with corner joint 6.06, 6.12, 2.06, 2.36
Cutout for triple socket for NG V 6.30 side panelling 10.30, 10.43,
6.15, 8.91 Orgaset 2 for pull-out larder unit 10.22, 10.36,
cuttings for uneven walls 6.21 10.81, 10.84, 10.150
Bottom for infill panel 10.49, 2.06, 2.36
Hinged door with Tip-On 10.16
10.53, 10.58, 10.64
a.20
a.21
a.22
Fronts
Fronts
Door classes
ALNO range lines with handle STARLINE range lines without handle
Base unit heights 780 and 715 mm Base unit heights 780 and 715 mm
A78 A72 S78 S72
No. 000/000
Height and width reductions possible Front can be extensively planned thanks to large range of
accessories in door colour
Height reductions possible Visible sides and plinths
Modular panels / cover panels and RBS (depending on range)
Colour discrepancies
Deviations in the colour representations in the illustrations of original colours are due to printing technology.
To achieve a harmonious look we recommend a veneered finish for any other furniture elements.
Finish
The finish is offset if there are several doors on one and the same cabinet.
Instructions for use, cleaning and care are included with delivery of the kitchen.
PG 1 252 / 340 ALNOPLAN / ALNOSTAR PLAN Melamine PG 2 364 / 398 ALNODUR / ALNOSTAR DUR Laminate PG 3 450 / 452 ALNOPURE / ALNOSTAR PURE Laminate PG 4 366 / 374 ALNOFINE / ALNOSTAR FINE Lacquer
No. 459/458 ultra white No. 860/775 white No. 787/776 magnolia No. 181/293 cashmere No. 475/475 fango No. 270/270 white No. 271/271 magnolia No. 183/240 sand grey, No. 496/496 marble No. 350/350 ferro No. 347/347 ferro No. 280/280 ultra white No. 451/451 ultra white No. 476/476 ultra white No. 503/503 ultra white No. 465/465 white No. 470/470 light grey No. 17A/61A light grey No. 505/505 Manhattan No. 429/429 anthracite No. 199/266 graphite No. 430/430 black matt No. 499/591 NCS or
white stone structure white stone structure stone structure truffle bronze titanium super matt super matt, brass effect super matt, core natural super matt, dark grey super matt super matt matt grey matt grey matt matt RAL colour matt
edging oak-effect edging (end- metallic edging
grained wood edge)
PG 2 454 / 456 ALNOPEARL / ALNOSTAR PEARL Lacquer laminate PG 4 440 / 422 ALNOSUND / ALNOSTAR SUND Lacquer
No. 298/298 light grey No. 479/479 Manhattan No. 384/384 anthracite No. 400/400 oxide No. 346/346 oxide No. 450/450 oxide No. 196/246 lava grey, No. 362/362 high-gloss No. 299/299 high-gloss No. 301/301 high-gloss No. 302/302 high-gloss No. 319/319 high-gloss No. 471/471 fango No. 474/474 graphite No. 286/286 black No. 454/454 black No. 477/477 black No. 504/504 black No. 24A/73A ultra white No. 25A/68A white No. 26A/69A magnolia No. 27A/71A cashmere No. 29A/76A fango No. 369/369 marsala
grey grey light grey concrete anthracite grey stone structure ultra white white magnolia white cashmere light grey super matt super matt super matt super matt, brass effect super matt, core natural super matt, dark grey textured textured white textured textured textured red textured
edging oak-effect edging (end- metallic edging
grained wood edge)
PG 2 460 / 462 ALNOSOFT / ALNOSTAR SOFT Lacquer laminate PG 4 366 / 374 ALNOFINE / ALNOSTAR FINE Lacquer
No. 333/333 Katthult No. 481/481 oak effect No. 241/241 Sanremo No. 391/391 natural No. 314/314 walnut- No. 489/489 carbon No. 038/038 high-gloss No. 441/441 high-gloss No. 353/353 ultra white No. 356/356 white matt No. 358/358 magnolia No. 361/361 light grey No. 367/370 ultra white No. 169/231 white matt No. 170/190 magnolia No. 198/248 cashmere No. 18A/62A fango matt No. 366/366 marsala No. 368/368 lime green No. 434/434 emerald No. 35A/70A platinum No. 37A/80A steel blue No. 36A/74A deep blue
pine-effect (end-grained cashmere grey, (end- oak-effect (synchronous oak-effect (end-grained effect (end-grained oak-effect (end-grained fango graphite matt white matt matt matt white matt matt red matt textured green textured blue textured textured textured
wood edge) grained wood edge) pore, end-grained wood wood edge) wood edge) wood edge)
vertical wood grain vertical wood grain edge) vertical wood grain vertical wood grain vertical wood grain vertical wood grain
No. 480/480 Katthult No. 279/283 oak effect No. 482/482 Sanremo No. 487/487 natural No. 488/488 walnut- No. 491/491 carbon No. 464/464 brass No. 478/478 dark grey No. 363/363 lime green No. 431/431 emerald No. 211/193 platinum No. 23A/66A steel No. 414/415 deep No. 28A/75A light grey No. 506/506 Manhattan No. 432/432 anthracite No. 31A/72A graphite No. 433/433 black No. 500/596 NCS or
pine-effect (end-grained cashmere grey, (end- oak-effect (synchronous oak-effect (end-grained effect (end-grained oak-effect (end-grained metallic metallic matt green matt blue matt blue matt blue matt textured grey textured grey textured textured textured RAL colour textured
wood edge) grained wood edge) pore, end-grained wood wood edge) wood edge) wood edge)
horizontal wood grain horizontal wood grain edge) horizontal wood grain horizontal wood grain horizontal wood grain horizontal wood grain
1.01
PG 5 242 / 342 ALNOSIGN / ALNOSTAR SIGN Lacquer PG 6 448 ALNOBRIT Lacquer PG 7 314 ALNOART pro Glass PG 9 346 / 344 ALNOCLASS / ALNOSTAR CLASS Veneer
No. 359/360 high-gloss No. 819/781 high-gloss No. 739/782 high-gloss No. 364/365 high-gloss No. 320/320 high-gloss No. 456/456 high-gloss No. 406 ultra white No. 407 white textured No. 45A magnolia white No. 410 cashmere No. 411 fango textured No. 425 marsala red No. 993 high-gloss No. 457 high-gloss No. 483 high-gloss No. 484 high-gloss No. 743 high-gloss No. 131/195 walnut, No. 797/785 carbon
ultra white white magnolia white cashmere light grey graphite textured textured textured textured white light grey champagne-metallic graphite-metallic black horizontal wood grain oak,
horizontal wood grain
No. 386 ultra white No. 38A white textured No. 39A magnolia white No. 388 cashmere No. 389 fango textured No. 402 marsala red No. 424 lime green No. 440 emerald green No. 412 platinum blue No. 419 steel blue No. 420 deep blue No. 509 high-gloss No. 510 high-gloss No. 511 high-gloss No. 512 high-gloss No. 513 high-gloss No. 376/376 old oak No. 449/449 old oak No. 380/380 old oak
textured textured textured textured textured textured textured textured textured white light grey champagne-metallic graphite-metallic black smoke grey (end- natural (end-grained reddish brown (end-
frame black matt frame black matt frame black matt frame black matt frame black matt grained wood edge) wood edge) grained wood edge)
PG 8 368 / 376 ALNOVETRINA / ALNOSTAR VETRINA Glass PG 9 396 / 400 ALNOCERA / ALNOSTAR CERA Ceramic
No. 401 lime green No. 437 emerald green No. 393 platinum blue No. 395 steel blue No. 396 deep blue No. 408 light grey No. 508 Manhattan grey No. 438 anthracite grey No. 423 graphite No. 439 black textured No. 531 NCS or RAL No. 309/392 high-gloss No. 117/232 high-gloss No. 381/381 high-gloss No. 461/461 high-gloss No. 460/460 high-gloss No. 322/322 consigo No. 515/515 filo oro No. 295/295 concretto No. 321/321 convinta No. 284/282 oxide nero
textured textured textured textured textured textured textured textured textured colour textured ultra white white light grey champagne-metallic graphite-metallic
PG 7 264 ALNOPOL Lacquer PG 8 476 / 478 ALNOGRAND / ALNOSTAR GRAND Lacquer PG 8 370 / 362 ALNOSATINA / ALNOSTAR SATINA Glass
No. 40A light grey No. 507 Manhattan grey No. 435 anthracite grey No. 398 graphite No. 436 black textured No. 530 NCS or RAL No. 892 high-gloss No. 597/597 NCS or No. 308/387 ultra white No. 134/492 white matt
textured textured textured textured colour textured white RAL colour high-gloss matt
1.02
An L-shaped kitchen without appliances or accessories but with a PS worktop has been used as a basis for this comparison of prices
within the ALNO ranges. Price index 100 (e.g. ALNOSIGN) shows how this compares with the other price groups.
1.03
Door thickness: 19 mm
Framed glass door in front finish Segmented glass door in front Frosted glass with frame in
with standard clear glass. For finish with standard clear glass. stainless steel-effect. For other
other glass doors see For other glass doors see glass doors see
summary of „glass finishes“. summary of „glass finishes“. summary of „glass finishes“.
Recommended handles Handle no. 270 Recommended handles Handle no. 149 Recommended handles
Handle no. 300 Handle no. 282 Handle no. 188 Handle no. 270
Recommended carcase and visible side colours Recommended carcase and visible side colours Recommended carcase and visible side colours
No. 193 anthracite No. 128 ultra white No. 127 oak-effect No. 173 natural No. 101 white No. 303 walnut
grey cashmere grey oak-effect
No. 128 ultra white No. 643 canyon No. 127 oak-effect No. 173 natural No. 127 oak-effect No. 101 white
cashmere grey oak-effect cashmere grey
1.04
Door thickness: 19 mm
Framed glass door in front finish Segmented glass door in front Frosted glass with frame in
with standard clear glass. For finish with standard clear glass. stainless steel-effect. For other
other glass doors see For other glass doors see glass doors see
summary of „glass finishes“. summary of „glass finishes“. summary of „glass finishes“.
No. 787/776 magnolia white No. 181/293 cashmere No. 475/475 fango
Recommended handles Handle no. 170 Recommended handles Handle no. 211 Recommended handles Handle no. 184
Handle no. 310 Handle no. 297 Handle no. 199 Handle no. 281 Handle no. 297 Handle no. 217
Recommended carcase and visible side colours Recommended carcase and visible side colours Recommended carcase and visible side colours
No. 173 natural No. 148 magnolia No. 158 Sanremo No. 101 white No. 190 cashmere No. 194 walnut- No. 193 anthracite No. 180 fango No. 472 deep blue
oak-effect white oak-effect effect grey matt
No. 148 magnolia No. 134 Katthult No. P78 Sanremo No. P32 soapstone No. 173 natural No. 194 walnut- No. 134 Katthult No. P79 castell No. 180 fango
white pine-effect oak-effect beige oak-effect effect pine-effect oak-effect
1.05
Door thickness: 19 mm
Framed glass door in front finish Segmented glass door in front Frosted glass with frame in
with standard clear glass. For finish with standard clear glass. stainless steel-effect. For other
other glass doors see For other glass doors see glass doors see
summary of „glass finishes“. summary of „glass finishes“. summary of „glass finishes“.
No. 298/298 light grey No. 479/479 Manhattan grey No. 384/384 anthracite grey
Recommended handles Handle no. 284 Recommended handles Handle no. 315 Recommended handles Handle no. 384
Handle no. 297 Handle no. 282 Handle no. 197 Handle no. 285 Handle no. 149 Handle no. 228
Recommended carcase and visible side colours Recommended carcase and visible side colours Recommended carcase and visible side colours
No. 179 light grey No. 123 graphite No. 101 white No. 127 oak-effect No. 179 light grey No. 423 graphite No. 128 ultra white No. 490 cashmere No. 193 anthracite
cashmere grey matt matt grey
No. 134 Katthult No. 123 graphite No. P27 lava grey, No. 128 ultra white No. 127 oak-effect No. 123 graphite No. P78 Sanremo No. 190 cashmere No. 193 anthracite
pine-effect stone structure cashmere grey oak-effect grey
1.06
Door thickness: 19 mm
Framed glass door in front finish Segmented glass door in front Frosted glass with frame in
with standard clear glass. For finish with standard clear glass. stainless steel-effect. For other
other glass doors see For other glass doors see glass doors see
summary of „glass finishes“. summary of „glass finishes“. summary of „glass finishes“.
No. 400/400 oxide light grey No. 346/346 oxide concrete No. 450/450 oxide anthracite
grey
Recommended handles Handle no. 384 Recommended handles Handle no. 299 Recommended handles Handle no. 384
Handle no. 307 Handle no. 297 Handle no. 282 Handle no. 217 Handle no. 286 Handle no. 275
Recommended carcase and visible side colours Recommended carcase and visible side colours Recommended carcase and visible side colours
No. 179 light grey No. 693 anthracite No. 101 white No. 123 graphite No. 101 white No. 179 light grey No. 123 graphite No. 179 light grey No. 193 anthracite
grey textured grey
No. 600 oxide light No. 193 anthracite No. 696 oxide No. 123 graphite No. 631 oxide No. 657 elm-effect No. 696 oxide No. 194 walnut- No. 600 oxide light
grey grey anthracite grey concrete caramel anthracite grey effect grey
1.07
Door thickness: 19 mm
Framed glass door in front finish Segmented glass door in front Frosted glass with frame in
with standard clear glass. For finish with standard clear glass. stainless steel-effect. For other
other glass doors see For other glass doors see glass doors see
summary of „glass finishes“. summary of „glass finishes“. summary of „glass finishes“.
No. 333/333 Katthult pine-effect No. 481/481 oak effect No. 241/241 Sanremo oak-effect
(end-grained wood edge) cashmere grey, (end-grained (synchronous pore, end-grained
vertical wood grain wood edge) vertical wood grain wood edge) vertical wood grain
No. 480/480 Katthult pine- No. 279/283 oak effect No. 482/482 Sanremo oak-effect
effect (end-grained wood edge) cashmere grey, (end-grained (synchronous pore, end-grained
horizontal wood grain wood edge) horizontal wood grain wood edge) horizontal wood grain
Recommended handles Handle no. 300 Recommended handles Handle no. 300 Recommended handles Handle no. 310
Handle no. 297 Handle no. 590 Handle no. 197 Handle no. 285 Handle no. 149 Handle no. 311
Recommended carcase and visible side colours Recommended carcase and visible side colours Recommended carcase and visible side colours
No. 179 light grey No. 123 graphite No. 101 white No. 127 oak-effect No. 179 light grey No. 423 graphite No. 128 ultra white No. 490 cashmere No. 193 anthracite
cashmere grey matt matt grey
No. 134 Katthult No. 123 graphite No. 660 marble No. 128 ultra white No. 127 oak-effect No. 123 graphite No. P78 Sanremo No. 190 cashmere No. 193 anthracite
pine-effect truffle cashmere grey oak-effect grey
1.08
Door thickness: 19 mm
Framed glass door in front finish Segmented glass door in front Frosted glass with frame in
with standard clear glass. For finish with standard clear glass. stainless steel-effect. For other
other glass doors see For other glass doors see glass doors see
summary of „glass finishes“. summary of „glass finishes“. summary of „glass finishes“.
No. 391/391 natural oak-effect No. 314/314 walnut-effect No. 489/489 carbon oak-effect
(end-grained wood edge) (end-grained wood edge) (end-grained wood edge)
vertical wood grain vertical wood grain vertical wood grain
No. 487/487 natural oak-effect No. 488/488 walnut-effect No. 491/491 carbon oak-effect
(end-grained wood edge) (end-grained wood edge) (end-grained wood edge)
horizontal wood grain horizontal wood grain horizontal wood grain
Recommended handles Handle no. 308 Recommended handles Handle no. 283 Recommended handles Handle no. 311
Handle no. 307 Handle no. 297 Handle no. 282 Handle no. 314 Handle no. 313 Handle no. 304
Recommended carcase and visible side colours Recommended carcase and visible side colours Recommended carcase and visible side colours
No. 101 white No. 193 anthracite No. 173 natural No. 194 walnut- No. 179 light grey No. 148 magnolia No. 665 platinum No. 193 anthracite No. 423 graphite
grey oak-effect effect white blue textured grey matt
No. 173 natural No. 696 oxide No. P27 lava grey, No. 190 cashmere No. 194 walnut- No. 632 marble No. 159 carbon No. 111 Manhattan No. 660 marble
oak-effect anthracite grey stone structure effect mocha black oak-effect grey truffle
1.09
Door thickness: 19 mm
Framed glass door in front finish Segmented glass door in front Frosted glass with frame in
with standard clear glass. For finish with standard clear glass. stainless steel-effect. For other
other glass doors see For other glass doors see glass doors see
summary of „glass finishes“. summary of „glass finishes“. summary of „glass finishes“.
No. 270/270 white stone No. 271/271 magnolia white No. 183/240 sand grey, stone
structure stone structure structure
Recommended handles Handle no. 275 Recommended handles Handle no. 298 Recommended handles Handle no. 158
Handle no. 184 Handle no. 311 Handle no. 286 Handle no. 270 Handle no. 186 Handle no. 283
Recommended carcase and visible side colours Recommended carcase and visible side colours Recommended carcase and visible side colours
No. 601 white No. 173 natural No. 101 white No. 134 Katthult No. 148 magnolia No. 173 natural No. 101 white No. 158 Sanremo No. 123 graphite
textured oak-effect pine-effect white oak-effect oak-effect
No. 696 oxide No. 173 natural No. 643 canyon No. 134 Katthult No. 657 elm-effect No. 148 magnolia No. 101 white No. P78 Sanremo No. 660 marble
anthracite grey oak-effect pine-effect caramel white oak-effect truffle
1.10
Door thickness: 19 mm
Framed glass door in front finish Segmented glass door in front Smoke glass with frame in matt
with standard clear glass. For finish with standard clear glass. black. For other glass doors see
other glass doors see For other glass doors see summary of „glass finishes“.
summary of „glass finishes“. summary of „glass finishes“.
No. 496/496 marble truffle No. 350/350 ferro bronze No. 347/347 ferro titanium
Recommended handles Handle no. 314 Recommended handles Handle no. 298 Recommended handles Handle no. 297
Handle no. 308 Handle no. 188 Handle no. 300 Handle no. 281 Handle no. 184 Handle no. 300
Recommended carcase and visible side colours Recommended carcase and visible side colours Recommended carcase and visible side colours
No. 179 light grey No. 693 anthracite No. 123 graphite No. 190 cashmere No. 193 anthracite No. 480 fango matt No. 603 cashmere No. 179 light grey No. 193 anthracite
grey textured grey textured grey
No. 660 marble No. 179 light grey No. 128 ultra white No. 190 cashmere No. 621 ferro bronze No. P27 lava grey, No. 622 ferro No. 179 light grey No. 193 anthracite
truffle stone structure titanium grey
1.11
Door thickness: 19 mm
Framed glass door in front finish Segmented glass door in front Smoke glass with frame in
with frosted glass. For other finish with frosted glass. For stainless steel-effect. For other
glass doors see summary of other glass doors see glass doors see summary of
glass finishes. summary of „glass finishes“. glass finishes.
No. 123 graphite No. 179 light grey No. 401 white matt
No. 660 marble No. 127 oak-effect No. P27 lava grey,
truffle cashmere grey stone structure
1.12
Door: MDF support panel. All around in matching colours, thick high
gloss edges, slightly rounded
High-gloss lacquer laminate surface. Interior white.
Framed glass door in front finish Segmented glass door in front Frosted glass with frame in
with standard clear glass. For finish with standard clear glass. stainless steel-effect. For other
other glass doors see For other glass doors see glass doors see
summary of „glass finishes“. summary of „glass finishes“. summary of „glass finishes“.
No. 362/362 high-gloss ultra No. 299/299 high-gloss white No. 301/301 high-gloss
white magnolia white
Recommended handles Handle no. 311 Recommended handles Handle no. 270 Recommended handles Handle no. 310
Handle no. 300 Handle no. 158 Handle no. 236 Handle no. 315 Handle no. 304 Handle no. 286
Recommended carcase and visible side colours Recommended carcase and visible side colours Recommended carcase and visible side colours
No. 928 gloss ultra No. 134 Katthult No. 923 graphite No. 901 gloss white No. 127 oak-effect No. 359 carbon oak No. 303 walnut No. 127 oak-effect No. 948 gloss
white pine-effect gloss cashmere grey cashmere grey magnolia white
No. 605 marble No. 128 ultra white No. 660 marble No. 624 travertine No. 127 oak-effect No. 632 marble No. 622 ferro No. 127 oak-effect No. 621 ferro bronze
carrara white truffle grey cashmere grey mocha black titanium cashmere grey
1.13
Door: MDF support panel. All around in matching colours, thick high
gloss edges, slightly rounded
High-gloss lacquer laminate surface. Interior white.
Framed glass door in front finish Segmented glass door in front Frosted glass with frame in
with standard clear glass. For finish with standard clear glass. stainless steel-effect. For other
other glass doors see For other glass doors see glass doors see
summary of „glass finishes“. summary of „glass finishes“. summary of „glass finishes“.
No. 302/302 high-gloss No. 319/319 high-gloss light No. 038/038 high-gloss fango
cashmere grey
Recommended handles Handle no. 315 Recommended handles Handle no. 283 Recommended handles Handle no. 184
Handle no. 275 Handle no. 270 Handle no. 285 Handle no. 308 Handle no. 384 Handle no. 228
Recommended carcase and visible side colours Recommended carcase and visible side colours Recommended carcase and visible side colours
No. 990 gloss No. 303 walnut No. 190 cashmere No. 979 light grey No. 193 anthracite No. 179 light grey No. 980 gloss fango No. 194 walnut- No. 128 ultra white
cashmere gloss grey effect
No. 621 ferro bronze No. 194 walnut- No. 602 aqua metal No. 643 canyon No. 127 oak-effect No. P78 Sanremo No. 602 aqua metal No. 180 fango No. 605 marble
effect cashmere grey oak-effect carrara white
1.14
Door: MDF support panel. All around in matching colours, thick high
gloss edges, slightly rounded
High-gloss lacquer laminate surface. Interior white.
Framed glass door in front finish Segmented glass door in front Smoke glass with frame in matt
with standard clear glass. For finish with standard clear glass. black. For other glass doors see
other glass doors see For other glass doors see summary of „glass finishes“.
summary of „glass finishes“. summary of „glass finishes“.
No. 441/441 high-gloss graphite No. 299 high-gloss white No. 301 high-gloss magnolia
white
Recommended handles Handle no. 283 Recommended handles Handle no. 270 Recommended handles Handle no. 225
Handle no. 168 Handle no. 384 Handle no. 236 Handle no. 231 Handle no. 304 Handle no. 286
Recommended carcase and visible side colours Recommended carcase and visible side colours Recommended carcase and visible side colours
No. 923 graphite No. 179 light grey No. 127 oak-effect No. 901 gloss white No. 127 oak-effect No. 359 carbon oak No. 303 walnut No. 127 oak-effect No. 948 gloss
gloss cashmere grey cashmere grey cashmere grey magnolia white
No. 696 oxide No. 602 aqua metal No. 127 oak-effect No. 624 travertine No. 127 oak-effect No. 632 marble No. 622 ferro No. 127 oak-effect No. 621 ferro bronze
anthracite grey cashmere grey grey cashmere grey mocha black titanium cashmere grey
1.15
Door: MDF support panel. All around in matching colours, thick matt
edges, slightly rounded. Interior white.
Framed glass door in front finish Segmented glass door in front Frosted glass with frame in
with standard clear glass. For finish with standard clear glass. stainless steel-effect. For other
other glass doors see For other glass doors see glass doors see
summary of „glass finishes“. summary of „glass finishes“. summary of „glass finishes“.
No. 353/353 ultra white matt No. 356/356 white matt No. 358/358 magnolia white
matt
Recommended handles Handle no. 306 Recommended handles Handle no. 283 Recommended handles Handle no. 286
Handle no. 270 Handle no. 186 Handle no. 300 Handle no. 590 Handle no. 281 Handle no. 227
Recommended carcase and visible side colours Recommended carcase and visible side colours Recommended carcase and visible side colours
No. 128 ultra white No. 127 oak-effect No. 359 carbon oak No. 193 anthracite No. 401 white matt No. 480 fango matt No. 448 magnolia No. 194 walnut- No. 173 natural
cashmere grey grey white matt effect oak-effect
No. 632 marble No. 127 oak-effect No. 660 marble No. P27 lava grey, No. 624 travertine No. 657 elm-effect No. 621 ferro bronze No. 194 walnut- No. 602 aqua metal
mocha black cashmere grey truffle stone structure grey caramel effect
1.16
Door: MDF support panel. All around in matching colours, thick matt
edges, slightly rounded. Interior white.
Framed glass door in front finish Segmented glass door in front Frosted glass with frame in
with standard clear glass. For finish with standard clear glass. stainless steel-effect. For other
other glass doors see For other glass doors see glass doors see
summary of „glass finishes“. summary of „glass finishes“. summary of „glass finishes“.
No. 361/361 light grey matt No. 451 ultra white super matt,
brass effect edging
Recommended handles Handle no. 188 Recommended handles Handle no. 307 Recommended handles Handle no. 282
Handle no. 285 Handle no. 308 Handle no. 286 Handle no. 384
Recommended carcase and visible side colours Recommended carcase and visible side colours Recommended carcase and visible side colours
No. 479 light grey No. 127 oak-effect No. 173 natural No. 128 ultra white No. 375 old oak No. 179 light grey
matt cashmere grey oak-effect natural
No. 657 elm-effect No. P27 lava grey, No. 179 light grey No. 605 marble No. 128 ultra white No. 602 aqua metal
caramel stone structure carrara white
1.17
Framed glass door in front finish Segmented glass door in front Smoke glass with frame in matt
with standard clear glass. For finish with standard clear glass. black. For other glass doors see
other glass doors see For other glass doors see summary of „glass finishes“.
summary of „glass finishes“. summary of „glass finishes“.
Recommended handles Handle no. 384 Recommended handles Handle no. 384 Recommended handles
Handle no. 184 Handle no. 275 Handle no. 312 Handle no. 300
Recommended carcase and visible side colours Recommended carcase and visible side colours Recommended carcase and visible side colours
No. 410 black matt No. 123 graphite No. 179 light grey No. 493 anthracite No. 158 Sanremo No. 359 carbon oak
grey matt oak-effect
No. 696 oxide No. 602 aqua metal No. 605 marble No. 602 aqua metal No. P78 Sanremo No. 621 ferro bronze
anthracite grey carrara white oak-effect
1.18
Door: Support panel with super matt special touch laminate. Support
panel with touch- special laminate in super matt. Surface dirt- and
fingerprint-repellent. All around in matching colours, thick matt
edges, slightly rounded.
Framed glass door in front finish Segmented glass door in front Frosted glass with frame in
with standard clear glass. For finish with standard clear glass. stainless steel-effect. For other
other glass doors see For other glass doors see glass doors see
summary of „glass finishes“. summary of „glass finishes“. summary of „glass finishes“.
No. 451/451 ultra white super No. 476/476 ultra white super No. 503/503 ultra white super
matt, brass effect edging matt, core natural oak-effect matt, dark grey metallic edging
edging (end-grained wood edge)
Recommended handles Handle no. 307 Recommended handles Handle no. 310 Recommended handles Handle no. 312
Handle no. 286 Handle no. 384 Handle no. 298 Handle no. 198 Handle no. 300 Handle no. 227
Recommended carcase and visible side colours Recommended carcase and visible side colours Recommended carcase and visible side colours
No. 128 ultra white No. 375 old oak No. 463 lime green No. 173 natural No. 128 ultra white No. 375 old oak No. 128 ultra white No. 123 graphite No. 193 anthracite
natural matt oak-effect natural grey
No. 605 marble No. 602 aqua metal No. 128 ultra white No. 173 natural No. 637 end-grained No. 128 ultra white No. 128 ultra white No. 123 graphite No. 622 ferro
carrara white oak-effect wood oak-effect titanium
1.19
Door: Support panel with super matt special touch laminate. Support
panel with touch- special laminate in super matt. Surface dirt- and
fingerprint-repellent. All around in matching colours, thick matt
edges, slightly rounded.
Framed glass door in front finish Segmented glass door in front Frosted glass with frame in
with standard clear glass. For finish with standard clear glass. stainless steel-effect. For other
other glass doors see For other glass doors see glass doors see
summary of „glass finishes“. summary of „glass finishes“. summary of „glass finishes“.
No. 280/280 ultra white super No. 465/465 white super matt No. 470/470 light grey super
matt matt
Recommended handles Handle no. 384 Recommended handles Handle no. 283 Recommended handles Handle no. 146
Handle no. 275 Handle no. 184 Handle no. 307 Handle no. 211 Handle no. 297 Handle no. 217
Recommended carcase and visible side colours Recommended carcase and visible side colours Recommended carcase and visible side colours
No. 128 ultra white No. 193 anthracite No. 486 steel blue No. 401 white matt No. 173 natural No. 359 carbon oak No. 479 light grey No. 134 Katthult No. 193 anthracite
grey matt oak-effect matt pine-effect grey
No. 696 oxide No. 193 anthracite No. 128 ultra white No. 657 elm-effect No. 173 natural No. 632 marble No. 696 oxide No. 134 Katthult No. 179 light grey
anthracite grey grey caramel oak-effect mocha black anthracite grey pine-effect
1.20
Door: Support panel with super matt special touch laminate. Support
panel with touch- special laminate in super matt. Surface dirt- and
fingerprint-repellent. All around in matching colours, thick matt
edges, slightly rounded.
Framed glass door in front finish Segmented glass door in front Smoke glass with frame in matt
with standard clear glass. For finish with standard clear glass. black. For other glass doors see
other glass doors see For other glass doors see summary of „glass finishes“.
summary of „glass finishes“. summary of „glass finishes“.
No. 471/471 fango super matt No. 474/474 graphite super matt No. 286/286 black super matt
Recommended handles Handle no. 184 Recommended handles Handle no. 188 Recommended handles Handle no. 282
Handle no. 310 Handle no. 308 Handle no. 384 Handle no. 307 Handle no. 170 Handle no. 275
Recommended carcase and visible side colours Recommended carcase and visible side colours Recommended carcase and visible side colours
No. 480 fango matt No. 331 old oak No. 194 walnut- No. 423 graphite No. 338 old oak No. 127 oak-effect No. 303 walnut No. 173 natural No. 410 black matt
smoke grey effect matt reddish brown cashmere grey oak-effect
No. 602 aqua metal No. 180 fango No. 194 walnut- No. 622 ferro No. 643 canyon No. 127 oak-effect No. 632 marble No. 602 aqua metal No. 605 marble
effect titanium cashmere grey mocha black carrara white
1.21
Door: Support panel with super matt special touch laminate. Support
panel with touch- special laminate in super matt. Surface dirt- and
fingerprint-repellent. All around in matching colours, thick matt
edges, slightly rounded.
Framed glass door in front finish Segmented glass door in front Smoke glass with frame in matt
with standard clear glass. For finish with standard clear glass. black. For other glass doors see
other glass doors see For other glass doors see summary of „glass finishes“.
summary of „glass finishes“. summary of „glass finishes“.
No. 454/454 black super matt, No. 477/477 black super matt, No. 504/504 black super matt,
brass effect edging core natural oak-effect edging dark grey metallic edging
(end-grained wood edge)
Recommended handles Handle no. 307 Recommended handles Handle no. 282 Recommended handles Handle no. 314
Handle no. 286 Handle no. 314 Handle no. 300 Handle no. 308 Handle no. 312 Handle no. 211
Recommended carcase and visible side colours Recommended carcase and visible side colours Recommended carcase and visible side colours
No. 338 old oak No. 410 black matt No. 123 graphite No. 173 natural No. 410 black matt No. 470 marsala No. 123 graphite No. 410 black matt No. 194 walnut-
reddish brown oak-effect red matt effect
No. 622 ferro No. 602 aqua metal No. 632 marble No. 173 natural No. 632 marble No. 637 end-grained No. 123 graphite No. 194 walnut- No. 622 ferro
titanium mocha black oak-effect mocha black wood oak-effect effect titanium
1.22
Door: Support panel, with small radius all around. Matt lacquered
surface.
Framed glass door in front finish Segmented glass door in front Frosted glass with frame in
with standard clear glass. For finish with standard clear glass. stainless steel-effect. For other
other glass doors see For other glass doors see glass doors see
summary of „glass finishes“. summary of „glass finishes“. summary of „glass finishes“.
No. 367/370 ultra white No. 170/190 magnolia No. 198/248 cashmere
matt white matt matt
No. 18A/62A fango No. 366/366 marsala No. 363/363 lime green
matt red matt matt
No. 414/415 deep blue No. 17A/61A light grey No. 505/505 Manhattan
No. 401 white matt No. 303 walnut No. 101 white matt matt grey matt
No. 600 oxide light No. 643 canyon No. P79 castell No. 429/429 anthracite No. 430/430 black matt
grey oak-effect No. 199/266 graphite
grey matt matt
1.23
Door: Support panel, with small radius all around. Surface finished in
finely textured lacquer.
Framed glass door in front finish Segmented glass door in front Frosted glass with frame in
with standard clear glass. For finish with standard clear glass. stainless steel-effect. For other
other glass doors see For other glass doors see glass doors see
summary of „glass finishes“. summary of „glass finishes“. summary of „glass finishes“.
No. 29A/76A fango No. 369/369 marsala No. 368/368 lime green
textured red textured textured
No. 36A/74A deep blue No. 28A/75A light grey No. 506/506 Manhattan
No. 601 white No. 303 walnut No. 101 white textured textured grey textured
textured
Door: MDF support panel, with small radius all around. Surface
finished with high-gloss lacquer.
Framed glass door in front finish Segmented glass door in front Frosted glass with frame in
with standard clear glass. For finish with standard clear glass. stainless steel-effect. For other
other glass doors see For other glass doors see glass doors see
summary of „glass finishes“. summary of „glass finishes“. summary of „glass finishes“.
No. 359/360 high-gloss ultra No. 819/781 high-gloss white No. 739/782 high-gloss
white magnolia white
Recommended handles Handle no. 307 Recommended handles Handle no. 188 Recommended handles Handle no. 146
Handle no. 270 Handle no. 384 Handle no. 283 Handle no. 313 Handle no. 284 Handle no. 304
Recommended carcase and visible side colours Recommended carcase and visible side colours Recommended carcase and visible side colours
No. 528 high-gloss No. 123 graphite No. 375 old oak No. 501 high-gloss No. 901 gloss white No. 359 carbon oak No. 548 high-gloss No. 173 natural No. 359 carbon oak
ultra white natural white magnolia white oak-effect
No. 660 marble No. 696 oxide No. 657 elm-effect No. 614 alpine No. 643 canyon No. P27 lava grey, No. P32 soapstone No. 173 natural No. 148 magnolia
truffle anthracite grey caramel oak-effect stone structure beige oak-effect white
1.25
Door: MDF support panel, with small radius all around. Surface
finished with high-gloss lacquer.
Framed glass door in front finish Segmented glass door in front Frosted glass with frame in
with standard clear glass. For finish with standard clear glass. stainless steel-effect. For other
other glass doors see For other glass doors see glass doors see
summary of „glass finishes“. summary of „glass finishes“. summary of „glass finishes“.
No. 364/365 high-gloss No. 320/320 high-gloss light No. 456/456 high-gloss graphite
cashmere grey
Recommended handles Handle no. 158 Recommended handles Handle no. 188 Recommended handles Handle no. 201
Handle no. 281 Handle no. 216 Handle no. 535 Handle no. 285 Handle no. 283 Handle no. 284
Recommended carcase and visible side colours Recommended carcase and visible side colours Recommended carcase and visible side colours
No. 590 high-gloss No. 127 oak-effect No. 303 walnut No. 179 light grey No. 579 high-gloss No. 134 Katthult No. 123 graphite No. 979 light grey No. 523 high-gloss
cashmere cashmere grey light grey pine-effect gloss graphite
No. 159 carbon No. 127 oak-effect No. 190 cashmere No. 643 canyon No. 660 marble No. 134 Katthult No. 696 oxide No. 643 canyon No. 159 carbon
oak-effect cashmere grey truffle pine-effect anthracite grey oak-effect
1.26
Door: MDF support panel, frame front, inner and outer edge slightly
rounded. Surface finished in finely textured lacquer.
No. 386 ultra white No. 39A magnolia white No. 388 cashmere
textured textured textured
No. 389 fango textured No. 402 marsala red No. 401 lime green
textured textured
No. 396 deep blue No. 40A light grey No. 507 Manhattan
No. 101 white No. 375 old oak No. 601 white textured textured grey textured
natural textured
Door: MDF support panel, Classical framed door. Moulded inner and
outer edge. Surface finished in finely textured lacquer.
No. 406 ultra white No. 407 white textured No. 410 cashmere
textured textured
No. 411 fango textured No. 425 marsala red No. 424 lime green
textured textured
No. 420 deep blue No. 408 light grey No. 508 Manhattan
No. 648 magnolia No. 148 magnolia No. 375 old oak textured textured grey textured
white textured white natural
Door: MDF support panel, Classical framed door. Moulded inner and
outer edge. Surface
finished with high-gloss lacquer.
Recommended carcase and visible side colours Recommended carcase and visible side colours Recommended carcase and visible side colours
No. 101 white No. 501 high-gloss No. 359 carbon oak
white
1.29
Door thickness: 21 mm
Further information: Not all items are available in this range. See
item description for exceptions. 585 mm worktop depth recommen- Frosted glass with frame in
ded. stainless steel-effect.
No. 993 high-gloss white No. 457 high-gloss light grey No. 483 high-gloss champagne-
metallic
Recommended carcase and visible side colours Recommended carcase and visible side colours Recommended carcase and visible side colours
No. 101 white No. 303 walnut No. 501 high-gloss No. 179 light grey No. 331 old oak No. 579 high-gloss No. 190 cashmere No. 359 carbon oak No. 901 gloss white
white smoke grey light grey
No. 632 marble No. 101 white No. 642 Arizona No. 660 marble No. 600 oxide light No. 127 oak-effect No. 190 cashmere No. 159 carbon No. 605 marble
mocha black pine-effect truffle grey cashmere grey oak-effect carrara white
1.30
Door thickness: 21 mm
Further information: Not all items are available in this range. See
item description for exceptions. 585 mm worktop depth recommen- Frosted glass with frame in
ded. stainless steel-effect.
Recommended carcase and visible side colours Recommended carcase and visible side colours
No. 179 light grey No. 123 graphite No. 490 cashmere No. 501 high-gloss No. 193 anthracite No. 410 black matt
matt white grey
No. 632 marble No. P27 lava grey, No. 134 Katthult No. 605 marble No. 614 alpine No. 657 elm-effect
mocha black stone structure pine-effect carrara white oak-effect caramel
1.31
Door thickness: 21 mm
Further information: Not all items are available in this range. See
item description for exceptions. 585 mm worktop depth recommen- Smoke glass with frame in matt
ded. black. For other glass doors see
summary of „glass finishes“.
No. 509 high-gloss white No. 510 high-gloss light grey No. 511 high-gloss champagne-
frame black matt frame black matt metallic
frame black matt
Recommended handles Recommended handles Recommended handles
Recommended carcase and visible side colours Recommended carcase and visible side colours Recommended carcase and visible side colours
No. 375 old oak No. 501 high-gloss No. 455 emerald No. 579 high-gloss No. 455 emerald No. 523 high-gloss No. 410 black matt No. 472 deep blue No. 523 high-gloss
natural white green matt light grey green matt graphite matt graphite
No. 180 fango No. P32 soapstone No. 657 elm-effect No. 660 marble No. 159 carbon No. 637 end-grained No. 632 marble No. 159 carbon No. 602 aqua metal
beige caramel truffle oak-effect wood oak-effect mocha black oak-effect
1.32
Door thickness: 21 mm
Further information: Not all items are available in this range. See
item description for exceptions. 585 mm worktop depth recommen- Smoke glass with frame in matt
ded. black. For other glass doors see
summary of „glass finishes“.
Recommended carcase and visible side colours Recommended carcase and visible side colours
No. 523 high-gloss No. 980 gloss fango No. 410 black matt No. 599 NCS or RAL No. 375 old oak No. 410 black matt
graphite colour high-gloss natural
No. 632 marble No. 180 fango No. 643 canyon No. 159 carbon No. 602 aqua metal No. 657 elm-effect
mocha black oak-effect caramel
1.33
Door: MDF support panel, with small radius all around. Surface
finished with high-gloss lacquer.
Framed glass door in front finish Segmented glass door in front Smoke glass with frame in matt
with standard clear glass. For finish with standard clear glass. black. For other glass doors see
other glass doors see For other glass doors see summary of „glass finishes“.
summary of „glass finishes“. summary of „glass finishes“.
Recommended carcase and visible side colours Recommended carcase and visible side colours Recommended carcase and visible side colours
No. 338 old oak No. 599 NCS or RAL No. 501 high-gloss
reddish brown colour high-gloss white
1.34
Door: Support panel with high-gloss glass coloured from the back.
Gloss thick edges in matching colours all-round.
Interior white.
Further information: Not all items are available in this range. See
item description for exceptions. Segmented glass door in front Frosted glass with frame in
finish with standard clear glass. stainless steel-effect. For other
For other glass doors see glass doors see
summary of „glass finishes“. summary of „glass finishes“.
No. 309/392 high-gloss ultra No. 117/232 high-gloss white No. 381/381 high-gloss light
white grey
Recommended handles Handle no. 270 Recommended handles Handle no. 180 Recommended handles Handle no. 199
Handle no. 313 Handle no. 217 Handle no. 384 Handle no. 311 Handle no. 312 Handle no. 311
Recommended carcase and visible side colours Recommended carcase and visible side colours Recommended carcase and visible side colours
No. 528 high-gloss No. 303 walnut No. 359 carbon oak No. 901 gloss white No. 375 old oak No. 501 high-gloss No. 979 light grey No. 173 natural No. 127 oak-effect
ultra white natural white gloss oak-effect cashmere grey
No. 622 ferro No. 128 ultra white No. 632 marble No. 602 aqua metal No. 101 white No. 657 elm-effect No. 600 oxide light No. 179 light grey No. 127 oak-effect
titanium mocha black caramel grey cashmere grey
1.35
Door: Support panel with high-gloss glass coloured from the back.
Gloss thick edges in matching colours all-round.
Interior white.
Further information: Not all items are available in this range. See
item description for exceptions. Segmented glass door in front Frosted glass with frame in
finish with standard clear glass. stainless steel-effect. For other
For other glass doors see glass doors see
summary of „glass finishes“. summary of „glass finishes“.
Recommended handles Handle no. 384 Recommended handles Handle no. 216 Recommended handles Handle no. 283
Handle no. 211 Handle no. 307 Handle no. 535 Handle no. 312 Handle no. Handle no. 285
Recommended carcase and visible side colours Recommended carcase and visible side colours Recommended carcase and visible side colours
No. 590 high-gloss No. 331 old oak No. 670 marsala red No. 979 light grey No. 127 oak-effect No. 523 high-gloss No. 979 light grey No. No. 127 oak-effect
cashmere smoke grey textured gloss cashmere grey graphite gloss cashmere grey
No. P32 soapstone No. P27 lava grey, No. 696 oxide No. 159 carbon No. 179 light grey No. 621 ferro bronze No. No. 179 light grey No. 127 oak-effect
beige stone structure anthracite grey oak-effect cashmere grey
1.36
Door: Support panel with matt glass coloured from the back. Gloss
thick edges in matching colours all-round. Interior white.
Further information: Not all items are available in this range. See
item description for exceptions.
Segmented glass door in front Frosted glass with frame in
finish with standard clear glass. stainless steel-effect. For other
For other glass doors see glass doors see
summary of „glass finishes“. summary of „glass finishes“.
Recommended handles Handle no. 384 Recommended handles Handle no. 149
Handle no. 313 Handle no. 535 Handle no. 180 Handle no. 307
Recommended carcase and visible side colours Recommended carcase and visible side colours
No. 628 ultra white No. 127 oak-effect No. 303 walnut No. 401 white matt No. 127 oak-effect No. 680 fango
textured cashmere grey cashmere grey textured
No. 624 travertine No. 128 ultra white No. 605 marble No. 194 walnut- No. 127 oak-effect No. 180 fango
grey carrara white effect cashmere grey
1.37
Door: Support panel veneered, with solid edging and small radius
all-round. Matt lacquered surface.
Door thickness: 20 mm
Framed glass door in front finish Segmented glass door in front Smoke glass with frame in matt
with standard clear glass. For finish with standard clear glass. black. For other glass doors see
other glass doors see For other glass doors see summary of „glass finishes“.
summary of „glass finishes“. summary of „glass finishes“.
Recommended handles Handle no. 158 Recommended handles Handle no. 170 Recommended handles Handle no. 170
Handle no. 228 Handle no. 307 Handle no. 315 Handle no. 384
Recommended carcase and visible side colours Recommended carcase and visible side colours Recommended carcase and visible side colours
No. 303 walnut No. 428 ultra white No. 672 deep blue No. 501 high-gloss No. 480 fango matt No. 359 carbon oak
matt textured white
No. 101 white No. 128 ultra white No. 696 oxide No. 660 marble No. 624 travertine No. 632 marble
anthracite grey truffle grey mocha black
1.38
Door: Support panel veneered, with solid edging and small radius
all-round. Surface
brushed, stained and lacquered.
Door thickness: 20 mm
No. 376/376 old oak smoke grey No. 449/449 old oak natural No. 380/380 old oak reddish
(end-grained wood edge) (end-grained wood edge) brown (end-grained wood edge)
Recommended handles Handle no. 211 Recommended handles Handle no. 384 Recommended handles Handle no. 300
Handle no. 314 Handle no. 312 Handle no. 307 Handle no. 310 Handle no. 198 Handle no. 281
Recommended carcase and visible side colours Recommended carcase and visible side colours Recommended carcase and visible side colours
No. 663 lime green No. 331 old oak No. 623 graphite No. 375 old oak No. 610 black No. 655 emerald No. 480 fango matt No. 423 graphite No. 338 old oak
textured smoke grey textured natural textured green textured matt reddish brown
No. 111 Manhattan No. 123 graphite No. P27 lava grey, No. 624 travertine No. 602 aqua metal No. P32 soapstone No. 621 ferro bronze No. 123 graphite No. 660 marble
grey stone structure grey beige truffle
1.39
Door: Support panel with ceramic lining. Gloss thick edges in mat-
ching colours all-round. Interior white.
Door thickness: 22 mm
Further information: Not all items are available in this range. See
item description for exceptions.
Segmented glass door in front Frosted glass with frame in
finish with standard clear glass. stainless steel-effect. For other
For other glass doors see glass doors see
summary of „glass finishes“. summary of „glass finishes“.
No. 179 light grey No. 679 light grey No. 359 carbon oak
textured
1.40
Door: Support panel with ceramic lining. Gloss thick edges in mat-
ching colours all-round. Interior anthracite grey.
Further information: Not all items are available in this range. See
item description for exceptions.
Segmented glass door in front Frosted glass with frame in
finish with standard clear glass. stainless steel-effect. For other
For other glass doors see glass doors see
summary of „glass finishes“. summary of „glass finishes“.
No. 455 emerald No. 499 NCS or RAL No. 401 white matt
green matt colour matt
No. 159 carbon No. P27 lava grey, No. 605 marble
oak-effect stone structure carrara white
1.41
Door: Support panel with ceramic lining. Gloss thick edges in mat-
ching colours all-round. Interior anthracite grey.
Further information: Not all items are available in this range. See
item description for exceptions.
Segmented glass door in front Frosted glass with frame in
finish with standard clear glass. stainless steel-effect. For other
For other glass doors see glass doors see
summary of „glass finishes“. summary of „glass finishes“.
No. 295/295 concretto No. 321/321 convinta No. 284/282 oxide nero
Recommended handles Handle no. 283 Recommended handles Handle no. 283 Recommended handles Handle no. 197
Handle no. 312 Handle no. 180 Handle no. 311 Handle no. 307 Handle no. 384 Handle no. 311
Recommended carcase and visible side colours Recommended carcase and visible side colours Recommended carcase and visible side colours
No. 465 platinum No. 303 walnut No. 428 ultra white No. 123 graphite No. 623 graphite No. 173 natural No. 123 graphite No. 623 graphite No. 303 walnut
blue matt matt textured oak-effect textured
No. C21 concretto No. 194 walnut- No. 111 Manhattan No. P45 convinta No. 123 graphite No. 173 natural No. 194 walnut- No. 180 fango No. P69 oxide nero
effect grey oak-effect effect
1.42
Range Range No. Colour No. PG Range Range No. Colour No. PG
ALNOFINE / ALNOSTAR FINE 366 / 374 499/591 4 ALNOSHAPE 442 530 6
These special finishes in textured lacquer are available on request at a surcharge per order. Choose from a variety of colours in the
colour systems NCS, RAL „Classic“ and RAL „Design“. Metallic colours and neon colours are excluded.
The surcharge is charged on units and additional elements as from the first part, regardless of the order value. If several RAL or
NCS colours are required in one order, the surcharge must be taken into account for each colour.
Colour recommendations:
pink grapefruit NCS S 1050-Y80R quartz grey NCS S 7502-Y
coral NCS S 0570-Y90R smoked rose NCS S 2020-Y80R
grenadine NCS S 1080-Y90R chocolate NCS S 8010-Y70R
ruby red violet NCS S 3560-R gentian blue NCS S 3560-R80B
mustard cream NCS S 2020-G90Y electric blue NCS S 3060-B
ocher NCS S 2040-Y20R sky NCS S 0515-B
sulfur NCS S 0560-G90Y lilac NCS S 1015-R60B
smoked mint NCS S 1510-G gray violet NCS S 5502-R
my green NCS S 3050-G40Y black violet NCS S 7020-R50B
pond green NCS S 8010-G50Y
These colour suggestions can be combined with our existing standard colours.
ultra white NCS S 0603-R80B platinum blue NCS S 3010-B10G
white NCS S 0500-N steel blue NCS S 5020-B10G
magnolia white NCS S 0502-Y50R deep blue NCS S 8010-R70B
cashmere NCS S 1505-Y40R light grey NCS S 1500-N
fango NCS S 4005-Y50R Manhattan grey NCS S 2500-N
marsala red matt NCS S 5030-R anthracite grey NCS S 6500-N
lime green matt NCS S 0510-G70Y black NCS S 9000-N
emerald green NCS S 7010-B50G
No. 128 ultra white No. 101 white No. 148 magnolia No. 190 cashmere No. 180 fango No. 179 light grey No. 193 anthracite No. 123 graphite
white grey
The front edge of the carcase on the visible side is also lacquered. The other carcase edges and the carcase top and bottom
panels are not lacquered. Neutral elements, such as plinth and ceiling panel ventilation grills, cover caps for wall unit fixtures are
not lacquered.
Important note:
Despite the use of modern lacquer mixing technology, minor differences may occur between the actual colour (due also to the matt
or textured nature of the surface) at reorders and the sample colours on NCS/RAL colour charts. These comply with the delivery
standard and do not justify complaints. Older colour charts may change as a result of exposure to light.
Colour samples of the NCS and RAL colour systems in DIN A4 size are available on request from various Internet suppliers quickly
and at low cost. Please refer: www.ncscolour.com
An NCS colour swatch is available with code number MNCS 16 AL for 361 ident points.
1.43
1.44
handles/glass finishes
Carcase/worktops/
Carcase interior colour is always white (except anthracite grey), variations in accordance with unit description. Order information for visible carcase sides and carcase outer colours Carcase interior colour is always white (except anthracite grey), variations in accordance with unit description.
Laminate carcase material: included in price
The carcase outer colours and visible sides must be ordered separately. Real wood
When ordering visible carcase sides please state right or left or both. visible side veneered
at extra charge
With lacquered visible sides, the carcase front edge of the visible side is also lacquered;
Carcase front edge in wood
with veneered visible sides, the carcase front edge is in a wood finish.
finish
Information on carcase colours with a white interior colour Information on the carcase colour anthracite grey With visible side veneered,
No. 134 No. 127 No. 158 No. 173 outer carcase colour only in: No. 375 No. 331 No. 303
Katthult pine-effect oak-effect cashmere grey Sanremo oak-effect natural oak-effect old oak natural (2) old oak smoke grey (1) walnut
(1) - graphite No. 123
- anthracite grey No. 193
(2) - natural oak-effect
No. 173
- anthracite grey No. 193
Dresser units, display units and wall units with glass door inside in Carcase interior always anthracite grey
visible side colours carcase finish.
No. 194 No. 128 No. 101 No. 148 Carcase interior colour for all other units is white. No. 338 No. 359
walnut-effect ultra white white magnolia white old oak reddish brown (1) carbon oak (1)
- The carcase outer colour must correspond with the visible side: Visible sides:
No. 193
anthracite grey
1.45
Carcase interior colour is always white (except anthracite grey), variations in accordance with unit description. Carcase interior colour is always white (except anthracite grey), variations in accordance with unit description. Carcase interior colour is always white (except anthracite grey), variations in accordance with unit description.
High-gloss lacquer
visible side lacquered
at a surcharge
Front edge of carcase on
visible side is also lacquered.
(1) - in white No. 101,
ultra white No. 128,
No. 463 No. 455 No. 465 No. 486 No. 663 No. 655 No. 665 No. 686 magnolia white No. 148, No. 528 No. 501 No. 548
lime green matt (1) emerald green matt (1) platinum blue matt (1) steel blue matt (1) lime green textured (1) emerald green structure (1) platinum blue textured (1) steel blue textured (1) high-gloss ultra white high-gloss white high-gloss magnolia white
light grey No 179,
cashmere No. 190,
fango No. 180,
anthracite grey No. 193
or graphite No. 123
No. 472 No. 479 No. 411 No. 493 No. 672 No. 679 No. 611 No. 693 No. 590 No. 579 No. 523
deep blue matt (1) light grey matt Manhattan grey matt (2) anthracite grey matt deep blue textured (1) light grey textured Manhattan grey textured (2) anthracite grey textured high-gloss cashmere high-gloss light grey high-gloss graphite
No. 423 No. 410 No. 499 No. 623 No. 610 No. 649 No. 599
graphite matt black matt (1) NCS or RAL colour matt (3) graphite textured black textured (1) NCS or RAL colour textured (3) NCS or RAL colour high-gloss (1)
1.46
Plinth panels
Ceiling infill
Colour code
16 42 16
Material thickness (mm) 16 16 16 16 10 25 54 32 16 16
50
Laminate anthracite grey No. 193 l l l l l l l
oak-effect cashmere grey No. 127 l l l l l l l
natural oak-effect No. 173 l l l l l l l
fango No. 180 l l l l l l l
graphite No. 123 l l l l l l l
light grey No. 179 l l l l l l l
cashmere No. 190 l l l l l l l
Katthult pine-effect No. 134 l l l l l l l
magnolia white No. 148 l l l l l l l
Sanremo oak-effect No. 158 l l l l l l l
ultra white No. 128 l l l l l l l
walnut-effect No. 194 l l l l l l l
white No. 101 l l l l l l l
Real wood old oak natural No. 375 l l l l l l l l
old oak smoke grey (1) No. 331 l l l l l l l l
old oak reddish brown No. 338 l l l l l l l l
carbon oak (1) No. 359 l l l l l l l l
walnut No. 303 l l l l l l l l
Gloss laminate graphite gloss No. 923 l l l l l l
gloss fango No. 990 l l l l l l
light grey gloss No. 979 l l l l l l
gloss cashmere No. 990 l l l l l l
gloss magnolia white No. 948 l l l l l l
gloss ultra white No. 928 l l l l l l
gloss white No. 901 l l l l l l
Laminate carbon oak-effect No. 859 l l l l
Ferro bronze
ferro bronze No. 621 l l l l
ferro titanium No. 622 l l l l
Manhattan grey No. 811 l l l l
lava grey, stone structure No. 815 l l l l
marble truffle No. 660 l l l l
oxide anthracite grey No. 696 l l l l
Oxide concrete
oxide concrete No. 631 l l l l
oxide light grey No. 600 l l l l
magnolia white stone structure No. 848 l l
sand grey, stone structure No. 814 l l
white stone structure No. 801 l l
black super matt No. 710 l l
ultra white super matt No. 728 l l
1.47
Plinth panels
Ceiling infill
Colour code
16 42 16
Material thickness (mm) 16 16 16 16 10 25 54 32 16 16
50
Matt lacquer anthracite grey matt No. 493 l l l l l l l l
fango matt No. 480 l l l l l l l l
graphite matt No. 423 l l l l l l l l
Manhattan grey matt No. 411 l l l l l l l l
light grey matt No. 479 l l l l l l l l
cashmere matt No. 490 l l l l l l l l
lime green matt (1) No. 463 l l l l l l l l
magnolia white matt No. 448 l l l l l l l l
marsala red matt (1) No. 470 l l l l l l l l
platinum blue matt No. 465 l l l l l l l l
black matt (1) No. 410 l l l l l l l l
emerald green matt No. 455 l l l l l l l l
steel blue matt (1) No. 486 l l l l l l l l
deep blue matt No. 472 l l l l l l l l
ultra white matt No. 428 l l l l l l l l
white matt No. 401 l l l l l l l l
NCS or RAL colour matt (3) No. 499 l l l l l l l l
Textured lacquer anthracite grey textured No. 693 l l l l l l l l l l
fango textured No. 680 l l l l l l l l l l
graphite textured No. 623 l l l l l l l l l l
Manhattan grey textured (2) No. 611 l l l l l l l l l l
light grey textured No. 679 l l l l l l l l l l
cashmere textured No. 603 l l l l l l l l l l
lime green textured No. 663 l l l l l l l l l l
magnolia white textured No. 648 l l l l l l l l l l
marsala red textured No. 670 l l l l l l l l l l
platinum blue textured (1) No. 665 l l l l l l l l l l
black textured No. 610 l l l l l l l l l l
emerald green structure (1) No. 655 l l l l l l l l l l
steel blue textured No. 686 l l l l l l l l l l
deep blue textured (1) No. 672 l l l l l l l l l l
ultra white textured No. 628 l l l l l l l l l l
white textured No. 601 l l l l l l l l l l
NCS or RAL colour textured No. 649 l l l l l l l l l l
High-gloss lacquer high-gloss graphite No. 523 l l l l l l l l
high-gloss light grey No. 579 l l l l l l l l
high-gloss cashmere No. 590 l l l l l l l l
high-gloss magnolia white No. 548 l l l l l l l l
high-gloss ultra white No. 528 l l l l l l l l
high-gloss white No. 501 l l l l l l l l l
NCS or RAL colour high-gloss (1) No. 599 l l l l l l l l
Metal effect high gloss chrome effect No. 196 l
stainless steel-effect No. 199 l l l
1.48
No. 134 16 40 78 No. 614 16 40 78 No. 159 16 40 78 No. 605 16 40 78 No. 602 16 40 78 No. P27 16 40 78
Katthult pine-effect alpine oak-effect carbon oak-effect marble carrara white aqua metal lava grey, stone structure
Large-scale finish with marked differences in colour.
No. 657 16 40 78 No. 642 16 40 78 No. P32 16 40 78 No. 600 16 40 78 No. 128 16 40 78 No. 101 16 40 78
elm-effect caramel Arizona pine-effect soapstone beige oxide light grey ultra white white
Large-scale finish with marked differences in colour. Large-scale finish with marked differences in colour.
No. 173 16 40 78 No. 166 16 40 78 No. 631 16 40 78 No. 696 16 40 78 No. 148 16 40 78 No. 190 16 40 78
natural oak-effect vintage oak-effect oxide concrete oxide anthracite grey magnolia white cashmere
No. 637 16 40 78 No. P78 16 40 78 No. 660 16 40 78 No. 624 16 40 78 No. 180 16 40 78
end-grained wood oak effect Sanremo oak-effect marble truffle travertine grey fango
Large-scale finish with marked differences in colour. Large-scale finish with marked differences in colour.
No. P79 16 40 78 No. 194 16 40 78 No. 632 16 40 78 No. 643 16 40 78 No. 179 16 40 78 No. 111 16 40 78
castell oak-effect walnut-effect marble mocha black canyon light grey Manhattan grey
Large-scale finish with marked differences in colour. Large-scale finish with marked differences in colour.
No. 127 16 40 78 No. 135 16 40 78 No. 621 16 40 78 No. 622 16 40 78 No. 193 16 40 78 No. 123 16 40 78
oak-effect cashmere grey stone oak-effect ferro bronze ferro titanium anthracite grey graphite
1.49
PS / PPS
Worktops PS, PA
Desk panels
Colour code
Colour code
Material thickness (mm)) 16 40 75 78 16 25 50 16
Worktop sur- alpine oak-effect No. 614 l l l l l No. 614 l l l l
face: Colours anthracite grey No. 193 l l l l l No. 193 l l l l
aqua metal No. 602 l l l l l No. 602 l l l l
PA Arizona pine-effect No. 642 l l l l l No. 642 l l l l
Board with slightly rounded, Magic or contrasting edge on one longitudinal edge and both return edges canyon No. 643 l l l l l No. 643 l l l l
carbon oak-effect No. 159 l l l l l No. 859 l l l l
Magic edges: castell oak-effect No. P79 l l l l l No. P79 l l l l
stainless steel/laminate No. 690 oak-effect cashmere grey No. 127 l l l l l No. 127 l l l l
natural oak-effect No. 173 l l l l l No. 173 l l l l
fango No. 180 l l l l l No. 180 l l l l
ferro bronze No. 621 l l l l l No. 621 l l l l
ferro titanium No. 622 l l l l l No. 622 l l l l
Magic edges:
lava grey, stone structure edging strip with stainless steel-effect No. 205 graphite No. 123 l l l l l No. 123 l l l l
light grey No. 179 l l l l l No. 179 l l l l
end-grained wood oak effect No. 637 l l l l l No. 637 l l l l
cashmere No. 190 l l l l l No. 190 l l l l
Katthult pine-effect No. 134 l l l l l No. 134 l l l l
Information on ALNO worktops
lava grey, stone structure No. P27 l l l l l No. P27 l l l l
magnolia white No. 148 l l l l l No. 148 l l l l
Manhattan grey No. 111 l l l l l No. 811 l l l l
All finishes have different areas of finish and colour in the direction of the pattern. Stone finish marble Carrara white No. 605 l l l l l No. 605 l l l l
is a natural stone reproduction that is printed in an extensive process with high quality colours. marble mocha black No. 632 l l l l l No. 632 l l l l
The finish is based on original stones, so the reproduction even includes the changes in lightness, marble truffle No. 660 l l l l l No. 660 l l l l
colour and structure that are seen in natural stone. These natural nuances in lightness and colour oxide anthracite grey No. 696 l l l l l No. 696 l l l l
may under certain circumstances be clearly visible in the join area between two worktops. These oxide concrete No. 631 l l l l l No. 631 l l l l
differences are unavoidable in natural stone reproduction, and are not flaws. oxide light grey No. 600 l l l l l No. 600 l l l l
For technical reasons, it is not possible to achieve a consistent structure in a matching colour when Sanremo oak-effect No. P78 l l l l l No. 158 l l l l
items are joined. Colours and structures may vary when additions are required. soapstone beige No. P32 l l l l l No. P32 l l l l
stone oak-effect No. 135 l l l l l No. 135 l l l l
travertine grey No. 624 l l l l l No. 624 l l l l
elm-effect caramel No. 657 l l l l l No. 657 l l l l
ultra white No. 128 l l l l l No. 128 l l l l
vintage oak-effect No. 166 l l l l l No. 166 l l l l
walnut-effect No. 194 l l l l l No. 194 l l l l
white No. 101 l l l l l No. 101 l l l l
Other matt aluminium-effect No. 198 l No. 198
colours and stainless steel-effect No. 199 l No. 199 l
finishes
1.50
Illustrations are not to scale! Illustrations are not to scale! Illustrations are not to scale!
w= horizontal s= vertical m= middle w= horizontal s= vertical m= middle w= horizontal s= vertical m= middle
No. 285 No. 460 No. 101 w/s/m No. 113 w/s/m No. 114 w/s/m No. 301 No. 281 w/m No. 300 w/m
Metal knob Metal knob Metal D-handle Metal D-handle Metal D-handle Metal knob Metal handle Metal D-handle
stainless steel-effect gloss gold-coloured tin-plated antique stainless steel-effect antique pewter, with printed tin-plated antique burnished matt black
depth 36 mm depth 28 mm depth 31 mm depth 32 mm insert depth 39 mm depth 30 mm depth 39 mm
drilling distance: 96 mm drilling distance: 128 mm depth 33 mm drilling distance: 64 mm drilling distance: 64 mm
drilling distance: 128 mm
No. 131 w/s/m No. 186 w/s/m No. 149 w/s/m No. 154 w/s/m No. 168 w/s/m No. 227 w/s/m No. 228 w/s/m No. 306 w/s/m No. 211 w/s/m No. 284 w/s/m No. 184 w No. 384 w
Metal D-handle Metal D-handle Metal D-handle Metal D-handle Metal D-handle Metal D-handle Metal D-handle Metal D-handle Metal D-handle Metal D-handle Strip handle stainless steel-effect, brushed Strip handle aluminium black
stainless steel-effect stainless steel-effect stainless steel-effect stainless steel-effect stainless steel-effect nickel black rust-coloured stainless steel-effect vintage black stainless steel-effect depth 16 mm depth 16 mm
depth 30 mm depth 38 mm depth 30 mm depth 38 mm depth 30 mm depth 28 mm depth 30 mm depth 36 mm depth 30 mm depth 30 mm see Technical Information see Technical Information
drilling distance: 128 mm drilling distance: 128 mm drilling distance: 160 mm drilling distance: 160 mm drilling distance: 160 mm drilling distance: 128 mm drilling distance: 128 mm drilling distance: 128 mm drilling distance: 160 mm drilling distance: 160 mm
Supplement handles 3
Door width Ident points per handle For the neutral glass front No. 535, the surcharge for strip handle
146 mm (150) 70 No. 184 equals 41 Ident points per handle in all widths.
No. 197 w/s/m No. 199 w/s/m No. 201 w/s/m No. 236 w/s/m No. 282 w/s/m No. 286 w/s/m No. 298 w/s/m No. 299 w/s/m No. 307 w/s/m No. 311 w/m
Metal D-handle Metal D-handle Metal D-handle Metal D-handle Metal D-handle Metal D-handle Metal D-handle Metal D-handle Metal D-handle Metal D-handle 296 mm (300) 80
stainless steel-effect stainless steel-effect stainless steel-effect stainless steel-effect stainless steel-effect vintage copper-effect vintage copper-effect stainless steel-effect champagne aluminium black
depth 40 mm depth 33 mm depth 32 mm depth 35 mm depth 35 mm depth 25 mm depth 35 mm depth 32 mm depth 35 mm depth 35 mm 396 mm (400) 86
drilling distance: 160 mm drilling distance: 160 mm drilling distance: 160 mm drilling distance: 160 mm drilling distance: 160 mm drilling distance: 160 mm drilling distance: 160 mm drilling distance: 160 mm drilling distance: 160 mm drilling distance: 160 mm
446 mm (450) 88
496 mm (500) 90
546 mm (550) 94
596 mm (600) 98
796 mm (800) 108
No. 283 w/s/m No. 297 w/s/m No. 304 w/s/m No. 308 w/s/m No. 310 w/m No. 312 w/m No. 313 w/m No. 146 w/s/m No. 180 w/s/m No. 216 w/s/m 896 mm (900) 112
Metal D-handle Metal D-handle Metal D-handle Metal D-handle Metal D-handle Metal D-handle Metal D-handle Metal D-handle Metal D-handle Metal D-handle 996 mm (1000) 114
stainless steel-effect used look stainless steel-effect antique brass effect black titanium-effect brass stainless steel-effect stainless steel-effect stainless steel-effect
depth 26 mm depth 32 mm depth 30 mm depth 31 mm depth 27 mm depth 30 mm depth 37 mm depth 30 mm depth 39 mm depth 31 mm 1196 mm (1200) 118
drilling distance: 160 mm drilling distance: 160 mm drilling distance: 160 mm drilling distance: 160 mm drilling distance: 160 mm drilling distance: 160 mm drilling distance: 160 mm drilling distance: 192 mm drilling distance: 192 mm drilling distance: 192 mm
No. 314 w/m No. 315 w/m No. 158 w/s/m No. 170 w/s/m No. 217 m No. 198 m No. 270 w No. 275 w
Metal D-handle Metal D-handle Metal D-handle Metal D-handle Metal D-handle Metal D-handle Strip handle stainless steel-effect Strip handle stainless steel-effect
textile-effect anthracite textile-effect brass high-gloss chrome stainless steel-effect stainless steel-effect stainless steel-effect depth 16 mm see Technical Information
depth 18 mm depth 18 mm depth 32 mm depth 24 mm depth 40 mm depth 38 mm see Technical Information
drilling distance: 160 mm drilling distance: 160 mm drilling distance: 192 mm drilling distance: 192 mm drilling distance: 320 mm drilling distance: 320 mm
see Technical Information see Technical Information
No. 188 w/s/m No. 510 m/s No. 535 m/s No. 590 m/s
Metal D-handle Bar handle stainless steel-effect Bar handle stainless steel-effect Bar handle stainless steel-effect
stainless steel-effect depth 32 mm depth 36 mm depth 38 mm
depth 32 mm see Technical Information see Technical Information see Technical Information
drilling distance: 192 mm
1.51
General Strip handles No. 184, No. 270 and No. 384 Strip handle No. 275
The horizontal D-handles with 128 mm, 160 mm and 192 mm When combining fronts and glass doors from different ranges, With its strip handle 275, ALNO has now made it possible to design
drill-hole distance are mounted vertically on doors with a width the handles and knobs may also be positioned differently. The metal strip handles blend with the joins between units and many different door ranges to look like ALNOART. Drawers, deep
of 266 mm or less, as well as on corner base unit doors with a Handles with 128 mm, 160 mm and 192 mm drill-hole distance underline the kitchen‘s horizontal linearity. drawers and hinged doors have a strip handle at the top
width of 325 mm. are centred on 30 cm doors. The handles are arranged horizontally. Wall units have an elegant small U-shaped profile at the bottom of
the door. This creates an unobtrusive thin lin.
Dowelled fronts are connected by means of a combined C-shaped
profile. A connection between door parts cannot be detected on the
inside or outside.
Flap doors and hinged doors installed at the top (above built-in
appliances) of tall units have full-length strip handles top-mounted
Bar handles Available for the following ranges Technical information
at the bottom.
For a door width of 796 mm and more, the bar handles No. 590 Centred bar handles: ALNOCERA ALNOPURE On tall units SU 122 A.., SU 102 A 156 M and tall units At no point are two strip handles fitted opposite one another on tall
as well as No. 535 will be supplied with a third fixing support. If combining centred bar handles with neutral glass doors, either ALNOCLASS ALNOSATINA with Servodrive opening aid, the hinged appliance door is units. The upper door is given the small U-shaped profile.
The bar handle No. 510 will also be supplied with a third fixing a handle with 128 drill-hole distance can be placed on the glass
ALNODUR ALNOSIGN divided for ergonomic reasons on height levels 6 or 5 1/2.
support from 1166 mm onwards. or a bar handle vertically on the glass frame.
Pull-out larder units will be supplied with horizontal bar handles. ALNOFINE ALNOSOFT It can only be factory-fitted. Available for the following ranges
Not available for tall units with continuous door material. ALNOGLINT ALNOSTRUCT The curved shape of strip handle 270 restricts finger
Bar No. Correlation ALNOGRAND ALNOSUND access to outer edge. ALNODUR ALNOPLAN
Bar No. 510 113 ALNOPEARL ALNOVETRINA Strip handle 270 is not available for UEK 80.. ALNOGLINT ALNOPURE
Bar No. 535 306 ALNOPLAN ALNOPEARL ALNOSOFT
Bar No. 590 186
Handles No. 198 and No. 217 Exceptions Exceptions Strip handle No. 275
Handles are positioned horizontally in the middle on doors over Handle No. Correlation Drill-hole distance Front panels up to 109 mm, room divider panels and oven unit panels are without strip handles. 135° corner solutions are not available.
446 mm wide. The corresponding smaller D-handle is horizon- 198 186 128 mm Special widths are generally not available. Units with a drawer in the bottom position cannot be
tally centred on 396 mm wide doors 217 197 160 mm Not available for base unit with pull-out table USTSA 60 (72). realized.
On all handles the smaller handle is centred horizontally in the The same „Planning recommendations“ apply as for strip
Cannot be used on base unit for raised dishwashers (SUG...) in conjunction with fold-down front panel GSBH 60 Front panels up to 109 mm, room divider panels and oven
middle on door width 296 mm, on narrower fronts it is positioned handles No. 184, No. 270 and No. 384.
vertically. Not available for tall units with continuous door material. enclosure panels are without strip handles.
Panels between wall and carcase, as well as corner infill
panels are supplied with strip handle
Side panelling in front finish (RBS) not available.
Handle No. 228, 300 ALNOCERA, ALNOSATINA and ALNOVETRINA Planning recommendations and instructions (also for centred bar handles)
Not available for tall units with continuous door material.
Handle No. 228 vertical is not possible for the ALNOBRIT The handles are secured with screws and additional slee- Ideal are unit types with drawers and deep drawers, in the wall unit area with Softlift, folding and flap doors, since function is not Special widths cannot be realized.
range. ves in these ranges. The following handles are available impaired in this case.
Handle No. 300 cannot be used in the ALNOBRIT and No.:
Notes on unit types with hinged doors:
ALNOPOL ranges. 146, 149, 180, 184, 197, 199, 216, 217, 270, 283, 284,
Technical information Planning recommendations and instructions
297, 306, 307, 311, 312, 313, 384, 535
Under certain circumstances, opening is only possible up to 75°.
On tall units SU 122 A.., SU 102 A 156 M and tall units Worktops 585 mm deep and flush with the front make it
Pay attention to the door handing so that the doors can be opened by 90° (observe a distance from the wall, take care
with Servodrive opening aid, the hinged appliance door is easier to open the doors.
with door handing directly adjacent to tall units and with protruding planning within the line, observe 65 cm planning
divided for ergonomic reasons on height levels 6 or 5 1/2. Two wall units without Tip-On must not be planned
Additional key codes dimension with 90° corner solutions).
It can only be factory-fitted. directly one above the other. This would make it impossi-
In combination with top panels a depth of 600 mm is recommended.
No. 000 ALNOART strip ble to reach into the strip handle of the upper door.
No. 99 Without handle drilling Side panelling (RBS) must not be planned, as this is not
compatible with the strip handle and would create an
offset in the appearance of the front.
1.52
ALNOART pro
ALNOBRIT
ALNOCERA
ALNOCLASS
ALNODUR
ALNOFINE
ALNOGLINT
ALNOGRAND
ALNOPEARL
ALNOPLAN
ALNOPOL
ALNOPURE
ALNOSATINA
ALNOSHAPE
ALNOSIGN
ALNOSOFT
ALNOSTRUCT
ALNOSUND
ALNOVETRINA
1.53
Colour code
Laminate concretto No. G160
consigo No. G151
convinta No. G145
oak-effect cashmere grey No. G127
natural oak-effect No. G118
Katthult pine-effect No. G134
oxide concrete No. G105
oxide nero No. G169
Sanremo oak-effect No. G158
walnut-effect No. G194
veneer old oak natural No. G357
old oak smoke grey No. G331
old oak reddish brown No. G338
carbon oak No. G359
walnut No. G303
Gloss laminate gloss fango No. G980
graphite gloss No. G923
light grey gloss No. G979
gloss cashmere No. G990
gloss magnolia white No. G948
gloss ultra white No. G928
gloss white No. G901
Laminate ferro bronze No. G107
lava grey, stone structure No. G815
sand grey, stone structure No. G814
Textured lacquer anthracite grey textured No. G693
fango textured No. G680
graphite textured No. G623
light grey textured No. G679
cashmere textured No. G603
lime green textured No. G663
magnolia white textured No. G648
Manhattan grey textured No. G611
marsala red textured No. G670
platinum blue textured No. G665
black textured No. G610
emerald green structure No. G655
steel blue textured No. G686
deep blue textured No. G672
ultra white textured No. G628
white textured No. G601
NCS or RAL colour textured No. G649
Metal effect champagne-metallic No. G108
stainless steel-effect No. G199
High-gloss lacquer NCS or RAL colour high-gloss No. G599
1.54
No. 500 No. 535 No. 535 No. 535 No. 535
Clear glass Frosted glass with frame same as above, but same as above, but same as above, but
Also for segmented in stainless steel-effect. with strip handle No. 184 with rail handle No. 535 without handle No. 99
glass doors. Only 128 mm handle (with supplement) or No. 590 vertical
drilling - horizontally (at extra charge).
centred!
No. 501 No. 510 No. 529 No. 538 No. 538
Clear glass with Frosted glass Smoke glass Smoke glass with frame same as above, but
bevelled edge Also for segmented Also for segmented in matt black. For other without handle No. 99
glass doors. glass doors. glass doors see
summary of „glass finishes“.
With strip handle No. 384.
(with supplement)
No. 502
Clear glass with
bevelled edge and
chrome bars
Available for ALNOBRIT,
ALNOPOL and ALNO-
SHAPE.
1.55
No. 536 ultra white No. 518 white* No. 521 magnolia white
No. 553 cashmere No. 584 light grey No. 524 glass green
1.56
Niche back panel finishes
No. 587 high-gloss cream white No. 586 cream white matt No. 588 high-gloss sand white
No. 589 sand white matt No. 539 high-gloss glass green No. 585 glass green matt
No. 534 high-gloss cotton No. 537 cotton matt No. 590 grey-brown mat
1.57
Glass niche back panel with motif
Dimensions in mm
Ordering information
All niche back panels in glass with motif can be ordered in any width from 300 to 2600 mm and in any height from 300 to 575 mm
for creating niches in any chosen design. Each section begins with motif at bottom left. Motif cannot run continuously across several
individual sections.
00
00
00
00
00
00
00
0
0
0
0
20
24
26
60
80
90
30
10
12
16
18
575
545
480
300
575
545
480
300
575
545
480
300
575
545
480
300
1.58
Glass niche back panel with motif
Dimensions in mm
Ordering information
All niche back panels in glass with motif can be ordered in any width from 300 to 2600 mm and in any height from 300 to 575 mm
for creating niches in any chosen design. Each section begins with motif at bottom left. Motif cannot run continuously across several
individual sections.
00
00
00
00
00
00
00
0
0
0
0
20
24
26
60
80
90
30
10
12
16
18
575
545
480
300
575
545
480
300
575
545
480
300
575
545
480
300
1.59
Glass niche back panel with motif
Dimensions in mm
Ordering information
All niche back panels in glass with motif can be ordered in any width from 300 to 2600 mm and in any height from 300 to 575 mm
for creating niches in any chosen design. Each section begins with motif at bottom left. Motif cannot run continuously across several
individual sections.
00
00
00
00
00
00
00
0
0
0
0
20
24
26
60
80
90
30
10
12
16
18
575
545
480
300
575
545
480
300
575
545
480
300
575
545
480
300
1.60
Glass niche back panel with motif
Dimensions in mm
Ordering information
All niche back panels in glass with motif can be ordered in any width from 300 to 2600 mm and in any height from 300 to 575 mm
for creating niches in any chosen design. Each section begins with motif at bottom left. Motif cannot run continuously across several
individual sections.
00
00
00
00
00
00
00
0
0
0
0
20
24
26
60
80
90
30
10
12
16
18
575
545
480
300
575
545
480
300
575
545
480
300
1.61
Glass niche back panel with motif
Dimensions in mm
Ordering information
Four complete tiles are possible in the niche between base and wall units if you
■ use tile size 136.25 mm for the ranges A72/S72.
■ use tile size 120 mm for the ranges A78/S78 with a panel thickness of 40 mm.
Each section begins with motif at bottom left. Specific motif sections are not available.
00
136.25
26
575
545
120
575
480
136.25
26
575
545
120
575
480
1.62
Glass niche back panel with motif
Dimensions in mm
Ordering information
Four complete tiles are possible in the niche between base and wall units if you
■ use tile size 136.25 mm for the ranges A72/S72.
■ use tile size 120 mm for the ranges A78/S78 with a panel thickness of 40 mm.
Each section begins with motif at bottom left. Specific motif sections are not available.
00
136.25
26
575
545
120
575
480
136.25
26
575
545
120
575
480
1.63
Glass niche back panel with motif
Dimensions in mm
Ordering information
Pattern repeat: motif can run through continuously if niche back panel pattern repeat can be divided.
■ Brocade: 300 mm in height and width Brocade band: 250 mm Metro tiles: tile size 150 x 75 mm
Example: pattern repeat 250 mm = width of the first niche back panel must be divisible by 250 mm.
■ With Patchwood, the motif can be re-positioned seamlessly every 600 mm.
00
300 Pattern repeat
26
575
545
480
150
575
545
480
1.64
ALNO Gallery
Motif can be continued up to 3600 mm without interruption in adjacent glass niches or 90° internal corners.
Dimensions in mm.
00
00
00
00
00
00
0
0
0
0
60
80
90
10
24
36
12
16
18
15
575
545
480
150
150
575
545
480
150
150
575
545
480
150
150
1.65
ALNO Gallery
Motif can be continued up to 3600 mm without interruption in adjacent glass niches or 90° internal corners.
Dimensions in mm.
00
00
00
00
00
00
0
0
0
0
60
80
90
10
24
36
12
16
18
15
575
545
480
150
150
575
545
480
150
150
575
545
480
150
150
1.66
2. Base units
2. Base units
A78 Base units 780 / 390 mm
Accessories
Special productions
780 mm high
2.01
715 mm high
2.02
Item
width mm
universal
hinge
ELITE interior equipment per drawer 138
per deep drawer 163
Filigree closed drawer and deep drawer system with metal sides
and bottom in anthracite grey. Dynamic load-bearing capacity and per drawer 247
synchronized air glide system.
per deep drawer 272
This interior finish can be ordered at a surcharge via version type 65 in
the kitchen planning system.
Not for base units with drawer line, sink unit with waste separation
system XXL/XXXL. See item description for further exceptions.
ELITE interior equipment with Tip-On
This interior finish can be ordered at a surcharge via version type 66 in
the kitchen planning system.
Not for internal drawers or interior deep drawers. See item description
for further exceptions.
Not for internal drawers or interior deep drawers. See item description
for further exceptions.
Mat anthracite
Mats are easily ordered via the head type in the kitchen planning
system.
Mats are automatically enclosed for all drawers, deep drawers, internal
drawers and interior deep drawers, as well as for all carousel shelves
in corner base units.
2.03
2.04
A78
Mats are easily ordered via the head type in the kitchen planning system. Mats are automatically enclosed for all drawers,
deep drawers, internal drawers and interior deep drawers, as well as for all carousel shelves in corner base units.
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Base unit U 30 348 394 431 452 472 530 549 609 744
U 40 369 414 452 472 494 553 570 631 837
1 hinged door U 45 376 421 457 478 502 560 588 645 882
2 adjustable shelves
U 50 384 429 464 486 511 572 601 656 928
Matching accessories: U 60 408 451 488 514 541 596 631 683 1024
Waste-disposal system ZA 4000 can be U 30 4 348 394 431 452 472 530 549 609 744
fitted from 450 mm width. 410
410 U 40 4 369 414 452 472 494 553 570 631 837
410 U 45 4 376 421 457 478 502 560 588 645 882
410 U 50 4 384 429 464 486 511 572 601 656 928
410 U 60 4 408 451 488 514 541 596 631 683 1024
2 U 30 2 390 441 481 505 529 596 616 680 833
2 U 40 2 411 461 502 525 552 617 639 703 927
2 U 45 2 418 469 508 531 560 625 656 716 972
2 U 50 2 425 477 515 539 568 638 669 726 1019
2 U 60 2 450 498 538 567 599 661 700 755 1115
42 U 30 42 390 441 481 505 529 596 616 680 833
42 U 40 42 411 461 502 525 552 617 639 703 927
42 U 45 42 418 469 508 531 560 625 656 716 972
42 U 50 42 425 477 515 539 568 638 669 726 1019
42 U 60 42 450 498 538 567 599 661 700 755 1115
Base unit U 80 572 663 738 778 822 939 975 1097 1517
U 90 590 679 751 793 840 957 1011 1126 1608
2 hinged doors U 100 606 699 767 810 860 983 1040 1150 1703
2 adjustable shelves
U 120 640 734 797 840 898 1027 1106 1202 1890
2 U 80 2 657 757 838 885 937 1070 1112 1239 1697
2 U 90 2 673 774 852 900 957 1086 1148 1269 1789
2 U 100 2 690 793 868 916 975 1114 1176 1291 1885
2 U 120 2 723 828 898 948 1013 1158 1241 1344 2072
Base unit for towels UHT 30 418 463 502 523 543 603 620 682 814
1 hinged door 2 UHT 30 2 460 511 553 577 602 668 690 754 906
1 towel rail,
extendable on roller guides
Base unit for towels UHT 15 381 420 451 475 500 560 571 605 665
1 hinged door
1 towel rail,
extendable on roller guides
Base unit UA 15 A 744 780 812 835 860 920 930 964 1006
1 deep drawer with
2 fixed wire baskets
Base unit for trays and baking tins UAB 15 A 744 780 813 836 861 922 932 966 1010
1 deep drawer with
1 fixed wire basket and baking tray holder
2.05
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Base unit UA 30 571 620 656 676 698 754 772 832 956
1 front pull-out with
2 fixed pull-out trays
Base unit UAA 30 A 831 879 915 936 957 1014 1031 1092 1202
1 larder pull-out for organising in any way
Arena shelf for pull-out larder unit ZI 30 AG 140 140 140 140 140 140 140 140 140
Anthracite grey
Orgaset 1 for pull-out larder unit ZI 30 11 AG 296 296 296 296 296 296 296 296 296
Anthracite grey
Set consists of 2 inserts.
Top insert comprising:
2 boxes (1.0 l), 1 box (2.1 l), 2 boxes
(2.0 l),
1 divider for knives, 2 lids, 2 support rails
bottom insert comprises:
1 box (3.2 l), 1 tray (1.1 L) with bottle
railing, 3 small dividers, 3 large dividers,
2 holders
Orgaset 2 for pull-out larder unit ZI 30 12 AG 135 135 135 135 135 135 135 135 135
Anthracite grey
Set consisting of:
2 boxes (1.0 l), 2 boxes (2.1 l), 2 lids,
1 large divider, 2 stpport rails
Base unit for provisions UT 60 A 994 1037 1074 1100 1127 1182 1217 1269 1610
1 hinged door
1 fixed basket
1 Orgaset
2 adjustable shelves in 410 mm depth
2.06
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Base unit with interior deep drawers UISIA 30 999 1044 1083 1105 1125 1184 1203 1265 1369
UISIA 45 1029 1075 1112 1133 1158 1217 1244 1304 1513
1 hinged door UISIA 50 1037 1085 1120 1141 1168 1230 1260 1315 1562
1 internal drawer
2 interior deep drawers UISIA 60 1059 1104 1140 1168 1195 1251 1287 1341 1656
2 UISIA 30 2 1041 1092 1134 1159 1183 1251 1272 1337 1463
Must not be placed directly alongside UISIA 45 2 1072 1123 1163 1187 1217 1283 1314 1376 1605
the wall. 2
Not available with Tip-On interior finish. 2 UISIA 50 2 1080 1133 1172 1196 1226 1297 1329 1388 1654
2 UISIA 60 2 1102 1152 1192 1222 1255 1318 1357 1414 1749
Base unit with interior deep drawers UIA 30 989 1035 1074 1095 1116 1176 1194 1257 1362
UIA 45 1020 1066 1102 1123 1149 1207 1235 1293 1503
1 hinged door UIA 50 1029 1076 1112 1133 1159 1222 1251 1307 1553
3 interior deep drawers
UIA 60 1052 1095 1133 1160 1187 1243 1280 1333 1649
Must not be placed directly alongside 2 UIA 30 2 1032 1084 1126 1151 1175 1242 1264 1329 1454
the wall. UIA 45 2 1063 1114 1154 1178 1207 1273 1305 1367 1596
Not available with Tip-On interior finish. 2
2 UIA 50 2 1072 1125 1163 1187 1218 1288 1321 1379 1646
2 UIA 60 2 1094 1143 1184 1215 1246 1310 1349 1407 1742
Base unit with interior drawer UAIS 30 1 705 754 791 812 833 891 909 971 1091
1 deep drawer
1 internal drawer
Matching accessories:
Bottle basket ZI 6 SG
Base unit with interior drawers UAIS 45 799 844 880 902 926 985 1012 1071 1295
UAIS 50 807 852 887 909 934 999 1027 1083 1341
1 deep drawer UAIS 60 829 873 911 939 967 1022 1058 1113 1438
2 internal drawers
Matching accessories:
Driver for internal drawer EZIZ..
Base unit USA 30 858 885 923 959 1001 1071 1093 1132 1352
USA 40 908 932 969 1006 1055 1128 1132 1167 1474
1 drawer USA 45 925 951 987 1029 1076 1148 1163 1201 1525
1 internal drawer
1 deep drawer USA 50 941 970 1007 1054 1097 1166 1193 1234 1576
USA 60 986 1014 1052 1100 1149 1227 1252 1299 1685
Matching accessories:
Bottle basket ZI 6 SG
Base unit US 30 492 517 554 593 633 704 726 766 1003
US 40 516 544 581 622 665 732 752 788 1104
1 drawer US 45 528 557 593 633 680 752 769 806 1149
1 hinged door
1 adjustable shelf US 50 536 566 603 649 692 761 788 829 1190
US 60 569 599 636 683 731 810 835 883 1289
Matching accessories: US 30 4 492 517 554 593 633 704 726 766 1003
Waste-disposal system ZA 4000 can be 410
fitted from 450 mm width. 410 US 40 4 516 544 581 622 665 732 752 788 1104
410 US 45 4 528 557 593 633 680 752 769 806 1149
410 US 50 4 536 566 603 649 692 761 788 829 1190
410 US 60 4 569 599 636 683 731 810 835 883 1289
Base unit US 80 901 956 1031 1113 1199 1333 1373 1446 2084
US 90 936 993 1064 1146 1240 1383 1417 1490 2182
2 drawers US 100 962 1022 1095 1188 1274 1413 1467 1548 2277
2 hinged doors
1 adjustable shelf
2.07
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Base unit U6S 30 1234 1272 1297 1379 1461 1568 1612 1643 2164
U6S 40 1260 1297 1328 1404 1486 1593 1637 1675 2290
6 drawers U6S 45 1287 1325 1357 1438 1521 1640 1665 1702 2341
Not available in ALNOART. U6S 50 1304 1360 1391 1492 1562 1669 1706 1763 2404
When fitted with Tip-On, the bottom U6S 60 1370 1420 1432 1533 1634 1772 1797 1829 2502
drawer is with low frame.
Base unit U3SA 30 928 967 997 1051 1114 1216 1243 1290 1648
U3SA 40 956 995 1026 1080 1143 1248 1278 1333 1763
3 drawers U3SA 45 973 1014 1044 1100 1162 1275 1301 1359 1808
1 deep drawer
U3SA 50 989 1038 1069 1135 1191 1299 1335 1401 1863
120 cm unit is not available U3SA 60 1038 1085 1108 1176 1243 1370 1418 1452 1965
in ALNOBRIT and ALNOPOL! U3SA 80 1345 1379 1411 1495 1568 1689 1720 1764 2433
U3SA 90 1366 1407 1444 1521 1599 1724 1750 1782 2545
U3SA 100 1389 1442 1468 1567 1650 1777 1799 1841 2672
U3SA 120 1575 1620 1650 1752 1843 1984 2011 2081 2898
710 U3SA 30 7 1296 1335 1364 1419 1482 1584 1612 1659 1998
710 U3SA 40 7 1319 1358 1390 1444 1507 1613 1642 1696 2107
710 U3SA 45 7 1338 1379 1410 1465 1527 1640 1665 1724 2155
710 U3SA 50 7 1357 1406 1435 1502 1559 1666 1701 1769 2211
710 U3SA 60 7 1401 1449 1471 1540 1608 1733 1782 1816 2310
Base unit U2S2A 30 967 1011 1049 1110 1174 1313 1342 1380 1772
U2S2A 40 991 1042 1084 1138 1210 1342 1370 1414 1837
2 drawers U2S2A 45 1015 1068 1103 1164 1235 1374 1394 1436 1867
2 deep drawers
U2S2A 50 1031 1091 1131 1190 1260 1411 1437 1498 1969
120 cm unit is not available U2S2A 60 1078 1126 1160 1227 1303 1464 1503 1533 2017
in ALNOBRIT and ALNOPOL! U2S2A 80 1394 1426 1451 1547 1646 1793 1812 1863 2527
U2S2A 90 1422 1456 1485 1575 1676 1821 1856 1887 2590
U2S2A 100 1447 1493 1516 1617 1728 1869 1896 1940 2669
U2S2A 120 1627 1668 1698 1807 1919 2070 2097 2160 2878
710 U2S2A 30 7 1332 1376 1414 1474 1539 1678 1707 1745 2119
710 U2S2A 40 7 1355 1406 1447 1501 1573 1705 1732 1776 2181
710 U2S2A 45 7 1380 1432 1468 1529 1600 1738 1760 1801 2213
710 U2S2A 50 7 1395 1457 1496 1556 1624 1775 1802 1864 2316
710 U2S2A 60 7 1442 1490 1524 1590 1666 1828 1868 1897 2361
710 U2S2A 80 7 1680 1712 1736 1833 1932 2078 2097 2147 2798
710 U2S2A 90 7 1706 1739 1769 1859 1959 2104 2140 2172 2859
710 U2S2A 100 7 1730 1776 1799 1900 2011 2151 2179 2223 2939
Base unit US2A 30 785 827 863 907 962 1080 1100 1151 1444
US2A 40 814 859 897 939 998 1116 1136 1194 1528
1 drawer US2A 45 829 877 910 956 1012 1134 1158 1219 1564
2 deep drawers
US2A 50 847 897 931 977 1033 1163 1193 1263 1638
120 cm unit is not available US2A 60 883 929 962 1014 1069 1206 1262 1295 1713
in ALNOBRIT and ALNOPOL! US2A 80 1137 1165 1193 1270 1344 1467 1500 1550 2132
US2A 90 1164 1192 1226 1297 1376 1503 1538 1573 2209
US2A 100 1197 1232 1261 1340 1426 1561 1583 1628 2304
US2A 120 1360 1393 1430 1511 1601 1742 1767 1824 2488
410 US2A 30 4 785 827 863 907 962 1080 1100 1151 1444
410 US2A 40 4 814 859 897 939 998 1116 1136 1194 1528
410 US2A 45 4 829 877 910 956 1012 1134 1158 1219 1564
410 US2A 50 4 847 897 931 977 1033 1163 1193 1263 1638
410 US2A 60 4 883 929 962 1014 1069 1206 1262 1295 1713
410 US2A 80 4 1137 1165 1193 1270 1344 1467 1500 1550 2132
410 US2A 90 4 1164 1192 1226 1297 1376 1503 1538 1573 2209
410 US2A 100 4 1197 1232 1261 1340 1426 1561 1583 1628 2304
710 US2A 30 7 1111 1153 1188 1232 1286 1406 1425 1475 1752
710 US2A 40 7 1140 1186 1224 1267 1324 1443 1464 1522 1839
710 US2A 45 7 1156 1204 1236 1281 1338 1461 1484 1544 1874
710 US2A 50 7 1172 1223 1258 1304 1359 1489 1520 1588 1948
710 US2A 60 7 1211 1258 1289 1342 1396 1534 1589 1623 2025
710 US2A 80 7 1407 1433 1462 1538 1613 1735 1769 1820 2387
710 US2A 90 7 1430 1459 1492 1564 1642 1770 1804 1839 2462
710 US2A 100 7 1464 1498 1527 1607 1692 1827 1849 1895 2557
2.08
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Base unit U2A 30 616 657 690 717 761 860 870 933 1128
U2A 40 648 687 721 753 797 902 916 987 1231
2 deep drawers U2A 45 658 702 731 760 802 909 934 1014 1274
120 cm unit is not available U2A 50 673 713 743 776 818 927 961 1038 1319
in ALNOBRIT and ALNOPOL! U2A 60 698 742 773 811 845 958 1028 1066 1418
U2A 80 942 966 998 1054 1104 1203 1251 1302 1795
U2A 90 965 987 1025 1078 1134 1245 1279 1317 1885
U2A 100 998 1020 1054 1113 1173 1302 1320 1366 1986
U2A 120 1099 1126 1168 1221 1289 1420 1443 1493 2102
710 U2A 30 7 858 898 931 959 1003 1101 1112 1174 1357
710 U2A 40 7 890 930 964 996 1039 1144 1159 1230 1462
710 U2A 45 7 901 945 974 1004 1046 1153 1177 1258 1505
710 U2A 50 7 916 957 985 1019 1061 1170 1204 1281 1550
710 U2A 60 7 940 984 1016 1054 1087 1201 1272 1310 1648
710 U2A 80 7 1145 1168 1200 1257 1307 1406 1454 1503 1988
710 U2A 90 7 1167 1190 1228 1280 1337 1448 1482 1520 2077
710 U2A 100 7 1199 1222 1256 1314 1375 1502 1522 1568 2177
Base unit U2AIS 30 737 777 811 837 882 980 990 1054 1242
U2AIS 40 770 810 844 874 919 1023 1038 1110 1347
2 deep drawers U2AIS 45 779 823 853 882 924 1031 1056 1135 1389
1 interior drawer at top
U2AIS 50 796 835 865 899 940 1050 1083 1161 1435
120 cm unit is not available U2AIS 60 820 864 896 933 967 1080 1152 1189 1534
in ALNOBRIT and ALNOPOL! U2AIS 80 1064 1087 1119 1175 1226 1324 1373 1423 1911
U2AIS 90 1086 1110 1148 1200 1257 1368 1400 1438 2000
Matching accessories:
Driver for internal drawer EZIZ.. U2AIS 100 1119 1141 1175 1234 1295 1423 1442 1488 2101
U2AIS 120 1221 1247 1289 1342 1412 1541 1565 1615 2217
Base unit U3A 30 834 882 926 976 1033 1187 1209 1250 1576
U3A 40 863 920 967 1011 1077 1222 1240 1287 1615
3 deep drawers U3A 45 881 940 978 1028 1094 1242 1262 1306 1632
120 cm unit is not available U3A 50 899 962 1006 1043 1113 1285 1308 1371 1755
in ALNOBRIT and ALNOPOL! U3A 60 937 984 1028 1079 1141 1315 1362 1390 1778
U3A 80 1239 1265 1286 1375 1475 1623 1645 1701 2275
U3A 90 1269 1290 1316 1400 1501 1649 1693 1728 2302
U3A 100 1296 1324 1349 1431 1544 1692 1721 1768 2340
U3A 120 1483 1511 1548 1637 1747 1898 1923 1974 2535
710 U3A 30 7 1136 1184 1228 1278 1335 1489 1511 1551 1863
710 U3A 40 7 1167 1224 1271 1315 1381 1526 1544 1592 1904
710 U3A 45 7 1185 1244 1282 1333 1398 1546 1566 1610 1921
710 U3A 50 7 1201 1264 1308 1345 1415 1587 1610 1673 2043
710 U3A 60 7 1240 1287 1332 1382 1445 1618 1665 1693 2066
710 U3A 80 7 1483 1508 1530 1618 1719 1867 1888 1945 2505
710 U3A 90 7 1512 1534 1560 1644 1745 1893 1937 1972 2533
710 U3A 100 7 1539 1568 1593 1675 1788 1936 1964 2011 2570
Base unit for fixed tables UFB 30 383 408 446 485 526 598 620 661 906
UFB 40 405 432 471 512 556 624 644 681 1006
1 fixed drawer front to which table is fixed UFB 45 420 449 485 526 574 646 663 700 1054
1 hinged door
1 adjustable shelf UFB 50 430 461 499 546 589 659 686 727 1099
UFB 60 458 488 526 574 621 701 727 775 1192
Only recommended with 105 mm plinth
height. Not available for ALNOART, ALNO-
CERA, ALNOSATINA and ALNOVETRINA.
Built-under drawer USK 50 355 365 370 388 399 417 423 432 533
USK 60 369 377 379 397 414 437 442 447 553
1 drawer
carcase 130 mm high
No visible sides!
2.09
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Base unit with pull-out table USTSA 60 1447 1494 1517 1587 1654 1782 1831 1866 2364
1 drawer
1 pull-out tabletop, white on telescopic
tracks
1 drawer
1 deep drawer
Size of the extended tabletop:
844 x 551 mm
Max. load: 25 kg
3-D base unit UV 30 1 404 431 458 482 504 563 585 618 817
1 hinged door 2 UV 30 12 450 481 511 539 566 630 655 692 885
2 adjustable shelves
3-D base unit UVA 30 1 842 866 889 912 930 986 1007 1038 1207
1 deep drawer with 2 UVA 30 12 887 916 942 968 992 1053 1076 1112 1275
2 fixed anthracite grey Arena shelves
Max. load-bearing capacity 7.5 kg per
shelf
Corner base unit UEK 80 A 1309 1403 1477 1517 1562 1680 1715 1844 2079
UEK 90 A 1413 1505 1577 1615 1664 1780 1821 1945 2258
Divided inwards pivoting door with
cushioning 2 UEK 80 2 A 1394 1498 1579 1625 1678 1812 1852 1988 2261
2 carousel shelves 2 UEK 90 2 A 1498 1599 1678 1723 1780 1911 1958 2090 2441
Arena shelf finish anthracite grey
Unit can be dismantled on site
Corner base unit UE 90 982 1073 1144 1182 1230 1345 1385 1509 1838
1 folding flap door 2 UE 90 2 1066 1167 1244 1288 1345 1475 1522 1651 2020
2 adjustable shelves
2.10
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Corner base unit UEKL 110 A 1533 1579 1615 1636 1661 1719 1746 1805 1987
with 45 cm door
1 hinged door UEKL 115 A 1578 1625 1660 1681 1706 1769 1797 1852 2069
2 fully pivotable height adjustable with 50 cm door
carousel shelves LeMans
Arena shelf finish anthracite grey UEKL 125 A 1660 1702 1740 1767 1794 1849 1885 1938 2220
with 60 cm door
carcase width 1000 mm, without corner 2 UEKL 110 2A 1572 1623 1662 1686 1715 1781 1812 1873 2075
infill panel with 45 cm door
left version shown
Corner inf. panel UEBE to be ordered 2 UEKL 115 2A 1616 1668 1706 1731 1761 1830 1863 1921 2157
separately. with 50 cm door
Do not plan with set-forward base unit. 2 UEKL 125 2A 1696 1745 1785 1816 1847 1909 1949 2005 2307
Matching accessories: with 60 cm door
self-closing ZID 29 AG
Corner base unit UESKL 110 A 1686 1715 1750 1792 1840 1913 1929 1967 2256
with 45 cm door
1 drawer UESKL 115 A 1732 1763 1799 1846 1890 1959 1987 2029 2335
1 hinged door with 50 cm door
2 fully pivotable height adjustable
carousel shelves LeMans UESKL 125 A 1819 1848 1886 1934 1982 2061 2088 2136 2486
Arena shelf finish anthracite grey with 60 cm door
Corner base unit UE 105 588 632 670 690 712 771 788 850 1043
with 40 cm door
1 hinged door UE 110 592 636 672 694 717 775 802 860 1086
2 adjustable shelves with 45 cm door
carcase width 1000 mm, without corner UE 115 596 642 676 698 722 784 813 867 1130
infill panel with 50 cm door
UE 125 607 650 686 713 741 795 830 883 1213
Corner inf. panel UEBE to be ordered with 60 cm door
left version shown separately.
2 UE 105 2 629 679 720 744 770 835 857 921 1134
with 40 cm door
2 UE 110 2 633 683 722 747 775 839 870 931 1176
with 45 cm door
2 UE 115 2 638 689 726 751 780 850 881 938 1220
with 50 cm door
2 UE 125 2 649 698 737 766 798 860 899 954 1305
with 60 cm door
Corner base unit UES 105 775 803 842 882 926 993 1014 1052 1358
with 40 cm door
1 drawer UES 110 785 814 850 891 938 1011 1028 1065 1400
1 hinged door with 45 cm door
1 adjustable shelf
UES 115 791 821 858 905 949 1018 1046 1087 1440
carcase width 1000 mm, without corner with 50 cm door
infill panel UES 125 807 837 875 923 971 1051 1077 1124 1525
with 60 cm door
left version shown Corner inf. panel UEBE to be ordered
separately.
2.11
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Corner infill panel UEBE 65 157 167 204 255 273 299 338 415 438
For corner base unit
fixed size corner infill mitred
planning dimensions 650 x 650 mm
Corner infill panel UEBE 20 V 212 273 321 372 414 477 501 576 656
same as above, but
variable corner infill panel mitred
Dimensions: 620 - 740 mm per side piece
Infill panel for base units UBF 15 130 140 149 158 166 191 200 211 258
Finish in door material
fitted between wall and carcase
In ALNOART, ALNOCERA,
ALNOSATINA and ALNOVETRINA
door width 75 mm,
adjustment range in
carcase finish 77 - 150 mm.
Other front widths (at least 50 mm)
available with MPS 1 (apart from ALNO-
ART) on request.
Infill panel for base units UBFG 15 144 154 164 171 183 204 217 225 270
Finish in door material
for fitting next to appliances
In ALNOART, ALNOCERA,
ALNOSATINA and ALNOVETRINA
door width 75 mm,
adjustment range in
carcase finish 77 - 150 mm.
Other front widths (at least 50 mm)
available with MPS 1 (apart from ALNO-
ART) on request.
Corner infill panel for base units UEBF 65 197 203 241 294 311 339 376 455 495
Finish in door material
for 90° corner solution
for planning dimensions 650 x 650 mm
Corner infill panel for base units UEBF 20 V 234 288 324 352 385 437 448 514 552
Finish in door material
for 90° corner solution
For variable planning dimensions
Min. dimension 50 mm per side.
max. 180 mm on carcase front edge per
leg
2.12
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Corner infill panel for base units UEBF 135 153 161 171 181 190 214 225 237 301
Finish in door material
for 135° corner solution
planning dimensions 259 x 259 mm
Corner infill panel for base units UEBF 135 V 171 181 218 268 288 315 350 430 458
Finish in door material
for 135° corner solution
Min. dimension 21 mm each side.
max. 180 mm on carcase front edge per
leg
Side cladding RBS 78 502 536 568 604 929 - 1064 1080 1136
for mounting on the carcase side
50 mm wide
Finish in door material
for carcase depth 560 mm
Side cladding RBS 78 7 520 558 593 631 1050 - 1201 1216 1254
same as above, but
for carcase depth 710 mm
Side cladding RBS 78 R 606 642 675 708 1085 - 1246 1254 1368
for mounting on the carcase side
50 mm wide
Finish in door material
for room divider and carcase depth
560 mm
Side cladding RBS 78 7 R 621 663 701 736 1203 - 1382 1401 1485
same as above, but
for room divider and carcase depth
710 mm
2.13
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Side cladding RBS 789 1 R 655 701 736 774 1414 - 1601 1619 1658
for mounting on the carcase side
50 mm wide
Finish in door material
for room divider base unit 560 mm deep
and display unit 350 mm deep
Height- and depth-variable side RBS RV 655 701 736 774 1414 - - 1685 1734
panelling
for mounting on the carcase side
50 mm wide
Finish in door material
for room dividers
Depth variable from 100 to 1164 mm
Height variable from 100 to 776 mm
Height- and depth-variable side RBSU V 621 663 701 736 1203 - - 1454 1485
panelling
for mounting on the carcase side
50 mm wide
Finish in door material
Depth variable from 100 to 732 mm
Height variable from 100 to 776 mm
Side cladding RBS 78 1 GS 526 560 592 628 953 - 1087 1103 1158
next to dishwasher
50 mm wide
Finish in door material
for carcase depth 560 mm
with integrated floor-length modular
support panel 16 mm
Not available for ALNOBRIT, ALNOPOL and
ALNOSHAPE.
Plinth required at the side. Recommended
worktops: 585 mm deep.
Height- and depth-variable side RBS 78 1 GS RV 678 724 760 797 1436 - - 1706 1734
panelling
next to dishwasher
50 mm wide
Finish in door material
for room dividers
Depth variable from 100 to 1164 mm
Height variable from 100 to 776 mm
with integrated floor-length modular
support panel 16 mm
2.14
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Side cladding two-part RBS2 78 949 1012 1080 1140 1645 - 1873 1890 1910
for mounting on the carcase side
50 mm wide
Finish in door material
for carcase depth 560 mm
Side cladding two-part RBS2 78 7 982 1055 1126 1193 1857 - 2113 2128 2195
same as above, but
for carcase depth 710 mm
Side cladding two-part RBS2 78 R 1144 1213 1283 1337 1921 - 2194 2215 2278
for mounting on the carcase side
50 mm wide
Finish in door material
for room divider and carcase depth
560 mm
Side cladding two-part RBS2 78 7 R 1175 1253 1332 1391 2129 - 2433 2452 2499
same as above, but
for room divider and carcase depth
710 mm
Side cladding two-part RBS2 789 1 R 1237 1325 1399 1464 2502 - 2819 2834 2901
for mounting on the carcase side
50 mm wide
Finish in door material
for room divider base unit 560 mm deep
and display unit 350 mm deep
Side panelling depth adjustable two- RBS2 78 RV 1431 1516 1605 1672 2401 - - 2743 2805
part
for room dividers
for mounting on the carcase side
50 mm wide
Finish in door material
Depth variable from 100 to 1164 mm
2.15
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Side panelling depth adjustable two- RBS2 78 V 1185 1266 1350 1426 2056 - - 2362 2397
part
for mounting on the carcase side
50 mm wide
Finish in door material
Depth variable from 100 to 732 mm
Side cladding two-part RBS2 78 1 GS 993 1059 1124 1187 1686 - 1914 1929 1943
next to dishwasher
50 mm wide
Finish in door material
for carcase depth 560 mm
with integrated floor-length modular
support panel 16 mm
Side panelling depth adjustable two- RBS2 78 1 GS RV 1281 1370 1442 1506 2543 - - 2988 3009
part
for room dividers
next to dishwasher
50 mm wide
Finish in door material
Depth variable from 100 to 1164 mm
with integrated floor-length modular
support panel 16 mm
2.16
high-gloss lacquer
Item
carcase height 780 mm
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
carcase depth 580 mm
width mm
Laminate
universal
veneer/
hinge
finish
Unit without worktop or plinth
Base shelf unit 600 UR3S 60 1513 3830 1754 1906 2332 2717 - -
900 UR3S 90 1847 4857 2199 2427 3053 3600 - -
3 drawers in ELITE
Base shelf unit 300 UR 30 384 1643 536 643 1022 1332 - -
2 adjustable shelves variable in width UR 00 V 541 2054 758 910 1279 1610 - -
from 150 to 600 mm
For colours and versions,
refer to colour matrix carcase
Base shelf unit 150 UR 15 318 1492 448 538 929 1063 - -
for trays and towels
Base shelf unit 150 URF 15 418 1758 585 702 1093 1229 - -
for bottles or scoops
4 fixed shelves
Order matching rustic wooden container
SCH 11 11 1 separately
Base end shelf unit, angled 300 URA 30 L/R 395 1621 554 665 1009 1265 - -
2 fixed shelves
Base end shelf unit 300 URE 30 L/R 362 1557 521 625 908 1149 - -
2 fixed shelves
2.17
high-gloss lacquer
Item
carcase height 780 mm
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
carcase depth 560 mm
width mm
Laminate
universal
veneer/
hinge
finish
Unit without worktop or plinth
Infill panel for base units 150 UBK 15 L/R 65 267 82 - 140 179 - -
Finish in carcase material
flush with carcase
fitted between wall and carcase
Infill panel for base units 150 UBT 15 74 290 96 - 152 188 - -
Finish in carcase material
for depth adjustment between carcase
and wall
Corner infill panel for base units UEBK 20 V 100 389 125 - 202 292 - -
Finish in carcase material
flush with carcase
For variable planning dimensions
for 90° corner solution
Min. dimension 25 mm each side
max. 180 mm on carcase front edge per
leg
Corner infill panel for base units UEBK 135 V 96 408 130 - 211 298 - -
Finish in carcase material
flush with carcase
For variable planning dimensions
for 135° corner solution
Min. dimension 21 mm each side.
Max. 180 mm at the carcase front edge
per side.
Available in all visible side colours.
2.18
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Base unit UA 60 39 449 471 487 505 522 578 614 633 805
UA 80 39 566 577 594 622 647 697 720 746 988
1 deep drawer UA 90 39 587 598 616 643 671 726 744 762 1040
120 cm unit is not available UA 100 39 603 614 631 661 691 755 764 787 1092
in ALNOBRIT and ALNOPOL! UA 120 39 669 682 704 729 764 829 840 866 1165
Base unit UAIS 60 39 587 608 624 643 660 716 752 771 934
UAIS 80 39 704 715 731 759 784 833 858 883 1118
1 deep drawer UAIS 90 39 723 735 754 780 809 864 881 900 1172
1 internal drawer
UAIS 100 39 756 768 785 815 847 912 921 945 1248
120 cm unit is not available UAIS 120 39 808 821 842 868 903 968 979 1005 1295
in ALNOBRIT and ALNOPOL!
Matching accessories:
Driver for internal drawer EZIZ..
Corner infill panel for base units UEBF 65 39 161 171 208 256 268 296 325 395 438
Finish in door material
for 90° corner solution
for planning dimensions 650 x 650 mm
Corner infill panel for base units UEBF 20 39 V 186 204 241 274 307 346 362 401 489
Finish in door material
For variable planning dimensions
for 90° corner solution
min. dimension 50 mm per side.
Max. 180 mm at the carcase front edge
per side.
Infill panel for base units UBF 15 39 100 110 118 128 139 158 168 177 221
Finish in door material
fitted between wall and carcase
In ALNOART, ALNOCERA,
ALNOSATINA and ALNOVETRINA
door width 75 mm,
adjustment range in
carcase finish 77 - 150 mm.
Other front widths (at least 50 mm)
available with MPS 1 (apart from ALNO-
ART) on request.
Side cladding RBS 39 474 506 540 572 823 - 938 944 949
for mounting on the carcase side
50 mm wide
Finish in door material
for carcase depth 560 mm
2.19
high-gloss lacquer
Item
carcase height 390 mm
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
carcase depth 580 mm
width mm
Laminate
universal
veneer/
hinge
finish
Base end shelf unit 300 URE 30 39 L/R 294 1051 386 463 666 832 - -
390 mm high
Infill panel for base units 150 UBK 15 39 L/R 53 257 67 - 135 194 - -
Finish in carcase material
flush with carcase
fitted between wall and carcase
2.20
Mats are easily ordered via the head type in the kitchen planning system. Mats are automatically enclosed for all drawers,
deep drawers, internal drawers and interior deep drawers, as well as for all carousel shelves in corner base units.
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Base unit for built-under oven UHS 60 508 514 525 539 571 623 631 647 766
UHS 90 666 673 681 710 745 - - 817 999
niche height 585 - 595 mm
1 drawer
Base unit for built-under oven UHS 60 1 537 551 557 583 611 657 664 675 899
for 16 mm thick worktops
niche height 585 - 595 mm
1 fixed front panel
1 drawer
with low frame
Base unit for built-under oven UHW 60 590 596 607 621 653 705 713 728 844
niche height 585 - 595 mm
with plinth drawer 170 mm high.
Base unit for built-under oven UH 60 254 260 271 286 317 369 377 394 525
niche height 585 - 595 mm
with front panel
Base unit for built-under oven UHA 90 660 671 683 722 766 837 856 873 1179
niche height 470 - 478 mm
1 deep drawer
Base unit for built-in appliances UMA 60 1 582 603 622 648 680 760 779 795 1037
Niche height 450 mm
1 deep drawer
2.21
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Heat-protection shelf ZV 60 58 58 58 58 58 58 58 58 58
600 mm unit width
For base units with drawers on top and ZV 80 72 72 72 72 72 72 72 72 72
hob above. 800 mm unit width
For carcase depth 560 mm.
Used as contact protection and heat ZV 90 82 82 82 82 82 82 82 82 82
insulation. 900 mm unit width
ZV 100 84 84 84 84 84 84 84 84 84
A distance of approx. 20 mm to the bot- 1000 mm unit width
tom edge of the worktop results. During ZV 120 106 106 106 106 106 106 106 106 106
planning and installation, it is essential 1200 mm unit width
to observe the safety distances of the
electrical appliance manufacturer! 710 ZV 60 7 71 71 71 71 71 71 71 71 71
600 mm unit width
710 ZV 80 7 91 91 91 91 91 91 91 91 91
800 mm unit width
710 ZV 90 7 89 89 89 89 89 89 89 89 89
900 mm unit width
710 ZV 100 7 101 101 101 101 101 101 101 101 101
1000 mm unit width
Base unit for hob UK2A 60 853 899 931 983 1038 1175 1231 1265 1683
or induction hob UK2A 80 1114 1140 1169 1245 1320 1443 1476 1527 2108
UK2A 90 1138 1167 1201 1272 1350 1478 1513 1547 2185
1 fixed front panel
1 cable protection shelf UK2A 100 1171 1206 1234 1314 1399 1534 1558 1602 2279
2 deep drawers UK2A 120 1257 1289 1326 1408 1497 1638 1663 1720 2389
UK2A 60 7 1101 1148 1180 1232 1286 1424 1480 1513 1920
120 cm unit is not available 710
in ALNOBRIT and ALNOPOL! 710 UK2A 80 7 1315 1342 1371 1447 1522 1644 1678 1728 2300
710 UK2A 90 7 1340 1369 1401 1473 1551 1680 1715 1749 2377
710 UK2A 100 7 1374 1409 1436 1516 1602 1736 1760 1804 2471
Base unit for hob UKS2A 60 1038 1086 1120 1187 1263 1424 1464 1493 1979
or induction hob UKS2A 80 1309 1340 1365 1462 1561 1707 1726 1776 2445
UKS2A 90 1336 1370 1398 1489 1589 1734 1770 1801 2509
1 fixed front panel
1 cable protection shelf UKS2A 100 1370 1416 1438 1539 1650 1791 1819 1863 2596
1 drawer UKS2A 120 1516 1557 1587 1696 1807 1958 1986 2049 2773
2 deep drawers
Base unit for induction hob UKHS2A 60 1 1069 1115 1148 1200 1254 1391 1447 1481 1889
UKHS2A 80 1 1365 1392 1421 1497 1572 1694 1728 1778 2348
1 shelf to prevent accidental contact UKHS2A 90 1 1432 1461 1494 1566 1644 1772 1806 1841 2464
1 drawer with low frame
2 deep drawers UKHS2A 100 1 1505 1539 1568 1647 1733 1868 1890 1936 2596
Base unit for hob UKHS2A 60 1021 1068 1100 1153 1207 1344 1399 1433 1844
UKHS2A 80 1318 1345 1374 1450 1525 1647 1681 1731 2303
1 heat protection shelf UKHS2A 90 1385 1414 1447 1519 1597 1725 1760 1794 2419
1 drawer
2 deep drawers UKHS2A 100 1459 1493 1522 1601 1687 1822 1844 1889 2552
UKHS2A 120 1663 1696 1733 1814 1904 2045 2070 2127 2775
120 cm unit is not available
in ALNOBRIT and ALNOPOL!
20 mm clearance to bottom edge of
worktop. During planning and installa-
tion, it is essential to observe the safety
distances of the electrical appliance
manufacturer! 120 cm unit with low
frame.
2.22
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Base unit for induction hob UKH2S2A 60 1 1265 1313 1346 1414 1489 1650 1690 1720 2194
UKH2S2A 80 1 1620 1651 1677 1773 1872 2019 2037 2088 2741
1 shelf to prevent accidental contact UKH2S2A 90 1 1689 1723 1752 1842 1943 2088 2124 2155 2844
1 drawer with low frame
1 drawer UKH2S2A 100 1 1763 1808 1832 1933 2044 2184 2211 2255 2969
2 deep drawers
Base unit for hob UKH2S2A 60 1219 1267 1301 1368 1443 1604 1644 1674 2149
UKH2S2A 80 1574 1605 1631 1727 1826 1973 1991 2042 2697
1 heat protection shelf UKH2S2A 90 1641 1675 1704 1794 1895 2039 2075 2106 2799
2 drawers
2 deep drawers UKH2S2A 100 1716 1762 1785 1885 1996 2137 2164 2208 2924
UKH2S2A 120 1932 1972 2002 2111 2223 2374 2401 2464 3168
120 cm unit is not available
in ALNOBRIT and ALNOPOL!
20 mm clearance to bottom edge of
worktop. During planning and installa-
tion, it is essential to observe the safety
distances of the electrical appliance
manufacturer! 120 cm unit with low
frame.
Base unit for induction hob UKH2A 60 1 883 927 959 997 1029 1143 1214 1252 1594
UKH2A 80 1 1171 1194 1226 1282 1333 1431 1480 1530 2013
1 shelf to prevent accidental contact UKH2A 90 1 1234 1258 1295 1347 1404 1515 1548 1586 2141
2 deep drawers
UKH2A 100 1 1306 1328 1362 1421 1482 1610 1628 1675 2278
120 cm unit is not available UKH2A 120 1 1448 1475 1518 1570 1639 1769 1792 1842 2433
in ALNOBRIT and ALNOPOL!
35 mm clearance to bottom edge of
worktop. During planning and installa-
tion, it is essential to observe the safety
distances of the electrical appliance
manufacturer!
Base unit for hob UKH2A 60 835 879 911 949 982 1095 1167 1205 1549
UKH2A 80 1124 1148 1178 1235 1285 1384 1432 1483 1968
1 heat protection shelf UKH2A 90 1187 1210 1247 1301 1357 1468 1501 1539 2096
2 deep drawers
UKH2A 100 1260 1282 1316 1375 1435 1564 1582 1628 2235
120 cm unit is not available UKH2A 120 1400 1428 1470 1523 1592 1722 1745 1795 2389
in ALNOBRIT and ALNOPOL!
20 mm clearance to bottom edge of
worktop. During planning and installa-
tion, it is essential to observe the safety
distances of the electrical appliance
manufacturer!
Base unit for retractable or hob-level UKU2A 90 1138 1167 1201 1272 1350 1478 1513 1547 2185
extractor UKU2A 100 1171 1206 1234 1314 1399 1534 1558 1602 2279
UKU2A 120 1257 1289 1326 1408 1497 1638 1663 1720 2389
2 deep drawers
2.23
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Base unit for retractable or hob-level UKU2A 90 1 1138 1167 1201 1272 1350 1478 1513 1547 2185
extractor UKU2A 100 1 1171 1206 1234 1314 1399 1534 1558 1602 2279
UKU2A 120 1 1257 1289 1326 1408 1497 1638 1663 1720 2389
1 fixed panel
2 deep drawers
Corner sink base unit SPE 105 559 605 643 663 685 745 763 824 1023
with 40 cm door
1 hinged door SPE 110 563 609 645 666 691 749 776 834 1065
1 fixed infill panel with 45 cm door
carcase width 1000 mm, without corner SPE 115 567 614 649 670 696 759 787 843 1110
infill panel with 50 cm door
SPE 125 579 622 660 686 714 769 805 858 1193
Corner inf. panel UEBE to be ordered with 60 cm door
left version shown separately.
2 SPE 105 2 602 653 694 717 744 811 831 897 1115
Matching accessories: with 40 cm door
Waste-disposal system ZA 401. 2 SPE 110 2 606 657 696 720 749 815 846 907 1157
with 45 cm door
2 SPE 115 2 610 662 700 724 754 824 856 914 1202
with 50 cm door
2 SPE 125 2 621 670 711 741 772 834 874 930 1286
with 60 cm door
Corner sink base unit SPD 90 887 947 1025 1081 1167 1252 1289 1370 1654
with 40 cm door
1 hinged door
1 fixed infill panel 2 SPD 90 2 930 993 1076 1135 1225 1318 1358 1441 1745
with 40 cm door
Unit can be dismantled on site
Matching accessories:
stainless steel shelf ZIT 90 E
Waste-disposal system ZA 401.
Sink base unit SP 45 360 405 442 462 487 546 573 631 872
SP 50 369 416 451 472 498 560 589 644 921
1 hinged door SP 60 394 437 474 501 528 583 619 672 1018
1 fixed infill panel
2 SP 45 2 402 453 493 516 546 611 642 704 963
Matching accessories: 2 SP 50 2 412 463 502 526 556 626 658 716 1013
Drip inserts EZIT .. A SP 60 2 436 485 525 555 587 649 689 745 1110
2
Sink base unit SP 80 555 646 722 763 807 926 962 1085 1511
SP 90 572 663 735 777 826 944 999 1115 1603
2 hinged doors SP 100 590 683 753 796 847 972 1029 1139 1701
2 fixed interior panels
SP 120 619 707 780 833 889 1000 1071 1177 1876
Matching accessories: 2 SP 80 2 640 742 824 871 924 1058 1100 1229 1694
Drip inserts EZIT .. A SP 90 2 657 759 837 885 944 1075 1136 1259 1787
2
2 SP 100 2 674 778 855 904 963 1104 1167 1283 1885
2 SP 120 2 705 802 882 942 1006 1131 1210 1322 2060
2.24
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Sink base unit SPA 45 337 380 417 439 462 521 548 606 851
SPA 50 346 391 426 448 472 536 564 619 899
1 door loose SPA 60 368 412 449 477 505 559 595 649 993
State when ordering if no handle drilling 2 SPA 45 2 378 428 468 493 521 587 616 678 941
required. 2 SPA 50 2 389 439 477 502 530 602 633 692 989
2 SPA 60 2 410 459 500 531 563 625 664 721 1085
Sink base unit SPA 45 1 483 526 560 588 615 667 701 754 1079
SPA 50 1 489 532 567 595 622 675 709 762 1090
1 reduced-depth deep drawer SPA 60 1 502 546 582 611 639 693 728 783 1120
450 mm deep
2 SPA 45 12 525 571 610 640 671 731 769 823 1167
Matching accessories: 2 SPA 50 12 531 577 616 647 679 739 777 832 1180
set of Servodrive accessories ZAZ 7 SPA 60 12 545 593 633 665 697 759 798 855 1212
2
Sink base unit SP2A 60 804 849 880 919 953 1067 1139 1177 1528
SP2A 80 1053 1076 1108 1165 1216 1316 1364 1415 1910
2 deep drawers SP2A 90 1073 1097 1135 1188 1245 1358 1391 1430 1999
Upper deep drawer with low back panel
350 mm deep SP2A 100 1100 1123 1158 1217 1278 1408 1427 1474 2095
SP2A 120 1134 1158 1193 1254 1325 1483 1503 1514 2253
120 cm unit is not available SP2A 60 2 847 897 931 973 1011 1133 1209 1250 1619
in ALNOBRIT and ALNOPOL! 2
The max. installation height for sinks incl. 2 SP2A 80 2 1094 1123 1159 1219 1274 1381 1433 1487 2002
waste in 40 mm worktops is as follows: 2 SP2A 90 2 1116 1144 1186 1242 1304 1424 1461 1502 2091
centred 322 mm 2 SP2A 100 2 1142 1171 1209 1271 1336 1474 1495 1545 2187
outside 230 mm 2 SP2A 120 2 1176 1205 1243 1308 1383 1547 1570 1585 2344
Matching accessories:
set of Servodrive accessories ZAZ 7
XXL waste separation systems ZA ..1 AG
fit bottom deep drawer.
Sink base unit with waste separation SPAMH 45 940 985 1022 1042 1067 1125 1152 1211 1425
and deep drawer with reduced depth SPAMH 50 986 1031 1067 1088 1113 1176 1205 1261 1507
SPAMH 60 1046 1089 1126 1156 1183 1237 1273 1327 1638
1 deep drawer with waste separation
system 2 SPAMH 45 2 983 1033 1072 1097 1125 1191 1221 1282 1517
with reduced-depth deep drawer 2 SPAMH 50 2 1029 1079 1118 1142 1171 1242 1274 1332 1598
400 mm deep for use with SPAMH 60 2 1088 1137 1177 1210 1241 1303 1342 1399 1730
low-lying service valves 2
or drains
1 cover shelf
waste separation system consisting of:
45 cm wide:
2 containers, 14 litres
50 cm wide:
2 containers 10 litres
1 container lid
1 container 14 litres
60 cm wide:
2 containers 10 litres
1 container lid
1 container 20 litres
2.25
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Sink base unit with waste separation SPAISM 45 1156 1200 1236 1257 1281 1340 1367 1425 1629
SPAISM 50 1197 1242 1278 1299 1324 1387 1416 1471 1707
1 deep drawer with waste separation SPAISM 60 1261 1304 1341 1370 1397 1451 1487 1541 1841
system XXL 500 mm deep
1 internal drawer With wire rack for 2 SPAISM 45 2 1197 1247 1287 1311 1340 1406 1435 1496 1720
storing cleaning products. 2 SPAISM 50 2 1240 1290 1329 1354 1382 1454 1485 1543 1798
2 SPAISM 60 2 1303 1352 1391 1424 1456 1517 1557 1614 1933
waste separation system consisting of:
45 cm wide:
1 container 12 litres
2 containers 8 litres each,
1 container lid
2 containers 2.5 litres each
50 cm wide:
1 container 12 litres
2 containers 8 litres each,
1 container lid
2 containers 2.5 litres each
60 cm wide:
1 container 18 litres
2 containers 8 litres each,
1 container lid
3 containers 2.5 litres each
Sink base unit with waste separation SPAM 45 982 1027 1063 1084 1109 1167 1193 1252 1464
SPAM 50 1028 1072 1109 1130 1155 1218 1246 1302 1545
1 deep drawer with waste separation SPAM 60 1084 1128 1165 1193 1221 1275 1311 1365 1674
system XXL 500 mm deep
1 cover shelf 2 SPAM 45 2 1013 1062 1101 1125 1154 1219 1247 1309 1538
2 SPAM 50 2 1070 1120 1160 1184 1213 1283 1316 1374 1638
waste separation system consisting of: SPAM 60 2 1126 1175 1216 1247 1279 1341 1380 1437 1766
45 cm wide: 2
1 container 12 litres
2 containers 8 litres each
1 container lid
2 containers 2.5 litres each
50 cm wide:
1 container 12 litres
2 containers 8 litres each
1 container lid
2 containers 2.5 litres each
60 cm wide:
1 container 18 litres
2 containers 8 litres each
1 container lid
3 containers 2.5 litres each
2.26
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Sink base unit with waste separation SPAM 60 1 1190 1234 1271 1299 1327 1381 1417 1471 1774
1 deep drawer with waste separation 2 SPAM 60 1 2 1232 1281 1322 1354 1385 1447 1486 1543 1867
system XXXL 500 mm deep
waste separation system consisting of:
2 containers 13 litres, 1 lid,
1 container 30 litres
Sink base unit with waste separation SPAM 60 3 1939 1983 2020 2048 2076 2130 2166 2221 2487
1 deep drawer with waste separation 2 SPAM 60 3 2 1982 2031 2071 2102 2134 2196 2235 2292 2578
system
450 mm deep
waste separation system consisting of:
1 container 40 litres
1 organic waste pin, 6 litre, with lid
1 container, 1.2 litres
System storage lid
The 40 litre bin accommodates a 35 litre
waste bag (CH).
Front panel GSB 45 171 208 234 273 310 399 408 445 777
GSB 60 198 234 269 315 356 448 464 495 889
for integrated dishwashers
1 front panel without handle drilling with
folding front panel
Front panel GSBV 45 193 220 259 303 351 425 442 481 860
GSBV 60 216 245 284 335 385 467 494 543 987
for fully integrated dishwashers
2 GSBV 45 2 237 269 311 359 411 494 513 556 955
1 front panel with handle drilling 2 GSBV 60 2 260 294 337 391 445 536 565 617 1082
with folding front panel
Front panel GSB 45 X 122 144 176 206 240 294 306 339 598
GSB 60 X 134 154 191 223 257 315 337 380 700
for integrated dishwashers
1 front panel without handle drilling
2.27
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Front panel GSBV 45 X 142 188 224 247 272 333 360 420 683
GSBV 60 X 156 201 239 268 297 353 391 447 814
for fully integrated dishwashers
2 GSBV 45 X 2 186 237 277 303 333 400 430 495 778
1 front panel with handle drilling 2 GSBV 60 X 2 200 250 292 324 357 421 462 521 908
Front panel GS2BV 60 X 176 222 255 295 330 449 523 562 958
for fully integrated dishwashers
1 front panel doweled with handle drilling
Front panel GSBV 45 1 227 273 310 333 357 418 445 506 765
GSBV 60 1 242 287 324 354 383 439 476 531 895
for fully integrated dishwashers
2 GSBV 45 12 271 322 363 389 418 486 516 580 860
1 front panel with handle drilling 2 GSBV 60 12 286 336 377 410 443 507 547 606 989
1 fixed interior panel
Front panel GS2BV 45 1 238 284 315 346 390 501 527 611 905
GS2BV 60 1 262 308 341 380 415 534 609 648 1038
for fully integrated dishwashers
1 front panel doweled with handle drilling
1 fixed interior panel
Front panel FWI 60 156 201 239 268 297 353 391 447 814
for fully integrated washing machines 2 FWI 60 20 200 250 292 324 357 421 462 521 908
Front panel FKI 60 176 221 260 290 318 374 411 467 833
for fully integrated refrigerators and 2 FKI 60 2 220 271 312 346 378 442 482 542 928
freezers
1 front panel with handle drilling
2.28
Room dividers
Display units/
A78
A78
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Display unit with glass door VGN 45 130 723 791 832 889 959 1056 1157 1193 1552
1300 mm high
in neutral glass front No. 538
1 glass door
3 adjustable glass shelves
Display unit V 45 91 1 458 516 556 593 629 693 731 771 1034
V 50 91 1 470 527 565 607 645 709 746 786 1091
1 hinged door V 60 91 1 486 541 578 626 671 736 774 820 1195
2 adjustable shelves
Display unit V 80 91 1 626 744 821 883 959 1087 1148 1216 1702
V 90 91 1 647 762 842 915 987 1114 1191 1271 1812
2 hinged doors V 100 91 1 663 777 853 936 1011 1140 1215 1296 1920
2 adjustable shelves
Display unit with glass door VG 45 91 1 476 609 671 731 840 923 999 1074 1092
VG 50 91 1 486 622 689 757 862 950 1026 1101 1119
1 glass door VG 60 91 1 502 648 721 793 909 1009 1084 1161 1169
2 adjustable glass shelves
For glass choices refer to
section Glass types
Display unit with segment door VGS 45 91 1 476 609 671 731 840 - - 1074 1124
VGS 50 91 1 486 622 689 757 862 - - 1101 1151
1 segment hinged door VGS 60 91 1 502 648 721 793 909 - - 1161 1203
2 adjustable glass shelves
For glass choices refer to
section Glass types
Display unit with glass door VGN 45 91 1 933 933 933 933 933 933 933 933 933
VGN 50 91 1 957 957 957 957 957 957 957 957 957
in neutral glass front No. 535 and No. 538 VGN 60 91 1 1014 1014 1014 1014 1014 1014 1014 1014 1014
1 glass door
2 adjustable glass shelves
The anti-tilt device which is supplied automatically must be fitted for room divider versions. 2.29
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Display unit with sliding door VST 90 91 1368 1424 1464 1499 1536 1600 1638 1678 1896
VST 100 91 1404 1463 1499 1540 1579 1642 1680 1721 1979
Carcase depth 360 mm incl. VST 120 91 1474 1532 1569 1616 1661 1726 1763 1808 2136
10 mm track system
2 carcases of the same width
2 adjustable glass shelves each
1 sliding door without handle
1 set of rails for on-site installation
2.30 The anti-tilt device which is supplied automatically must be fitted for room divider versions.
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Display unit V 30 78 1 426 472 511 532 553 613 631 694 827
V 40 78 1 444 490 528 549 571 631 650 712 919
1 hinged door V 45 78 1 451 497 533 555 579 639 667 725 965
2 adjustable shelves
V 50 78 1 459 507 543 564 590 653 681 737 1014
Room divider 3 not possible for V 30 78 1 V 60 78 1 482 526 564 591 618 674 711 764 1110
and V 40 78 1. V 30 78 2 469 520 563 588 612 679 701 766 920
2
2 V 40 78 2 487 538 579 604 630 698 719 784 1012
2 V 45 78 2 494 546 585 610 639 705 736 799 1057
2 V 50 78 2 503 555 594 618 649 719 752 811 1107
2 V 60 78 2 525 574 615 646 677 741 780 837 1203
Display unit V 80 78 1 632 724 802 843 887 1008 1044 1169 1596
V 90 78 1 650 742 815 858 907 1025 1081 1200 1690
2 hinged doors V 100 78 1 668 762 833 876 927 1055 1112 1224 1789
2 adjustable shelves
2 V 80 78 2 718 821 905 953 1006 1141 1184 1315 1782
2 V 90 78 2 735 838 918 967 1025 1159 1221 1345 1876
2 V 100 78 2 754 859 936 985 1046 1187 1252 1370 1975
Display unit with glass door VG 45 78 1 477 607 668 717 768 850 906 1046 1065
VG 50 78 1 486 617 684 735 783 875 938 1071 1091
1 glass door VG 60 78 1 502 645 719 768 832 933 990 1127 1137
2 adjustable glass shelves
For glass choices refer to
section Glass types
Display unit with segment door VGS 45 78 1 477 607 668 717 768 - - 1046 1094
VGS 50 78 1 486 617 684 735 783 - - 1071 1122
1 segment hinged door VGS 60 78 1 502 645 719 768 832 - - 1127 1171
2 adjustable glass shelves
For glass choices refer to
section Glass types
Display unit with glass door VGN 45 78 1 848 848 848 848 848 848 848 848 848
VGN 50 78 1 875 875 875 875 875 875 875 875 875
in neutral glass front No. 535 and No. 538 VGN 60 78 1 924 924 924 924 924 924 924 924 924
1 glass door
2 adjustable glass shelves
Display unit with sliding door VST 90 78 1338 1384 1420 1442 1467 1526 1552 1612 1809
VST 100 78 1367 1412 1448 1470 1494 1559 1588 1643 1874
Carcase depth 360 mm incl. VST 120 78 1443 1487 1525 1553 1581 1636 1673 1727 2023
10 mm track system
2 carcases of the same width
2 adjustable glass shelves each
1 sliding door without handle
1 set of rails for on-site installation
The anti-tilt device which is supplied automatically must be fitted for room divider versions. 2.31
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Surcharge for room divider version 1 MPRT 1 144 144 144 144 144 144 144 144 144
per unit
the unit is prepared to receive fixed back
panels
The rear carcase edge colour matches
the front carcase edge.
The room divider can be freely planned
and does not depend on the type of unit.
Back panel RB 60 39 130 153 169 189 206 265 302 322 516
RB 80 39 149 160 176 206 233 284 309 335 610
Finish in door material RB 90 39 156 168 188 215 245 302 320 340 652
386 mm high
RB 100 39 165 176 194 224 256 323 333 357 697
Alternatively, a 60 cm back infill panel RB 120 39 171 186 207 234 268 335 346 371 699
can be planned flush with the front for a
carcase depth of 560 mm. Pay attention
to front inside colour.
Back panel RB 39 V 198 218 240 261 309 372 395 418 785
per metre
same as above, but
variable dimensions 300-1160 mm
Back panel RB 30 78 134 184 220 243 264 323 342 405 556
RB 40 78 144 190 230 249 274 335 353 416 641
Finish in door material RB 45 78 149 194 232 253 278 339 365 425 687
776 mm high
RB 50 78 153 199 236 258 283 348 377 435 730
Alternatively, a 60 cm back infill panel RB 60 78 162 207 246 275 303 359 396 452 817
can be planned flush with the front for a RB 30 78 2 171 226 265 290 315 379 401 466 631
carcase depth of 560 mm. Pay attention 2
to front inside colour. 2 RB 40 78 2 188 239 282 305 334 403 423 490 735
2 RB 45 78 2 192 244 284 309 339 406 437 500 782
2 RB 50 78 2 191 241 281 304 334 404 436 495 803
2 RB 60 78 2 206 256 298 330 363 426 467 526 912
Back panel RB 78 V 293 312 333 376 418 473 498 518 879
per metre
same as above, but variable dimensions
300-1160 mm
Back panel two-part RB2 30 78 234 287 359 402 437 501 567 608 889
RB2 40 78 252 296 374 417 448 518 585 624 1025
Finish in door material RB2 45 78 261 302 377 423 455 525 606 639 1099
776 mm high (386+386 mm)
RB2 50 78 268 310 385 429 464 540 626 652 1169
Alternatively, a 60 cm back infill panel RB2 60 78 284 323 401 460 496 557 657 678 1308
can be planned flush with the front for a
carcase depth of 560 mm. Pay attention
to front inside colour.
2.32 The anti-tilt device which is supplied automatically must be fitted for room divider versions.
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Back panel RB 30 91 142 199 236 271 310 359 393 434 602
RB 40 91 149 206 246 278 316 380 412 448 702
Finish in door material RB 45 91 153 209 250 287 324 390 427 468 752
906 mm high
RB 50 91 156 216 254 296 335 400 438 479 805
RB 60 91 166 224 262 310 356 422 459 506 905
Back panel RB 30 130 158 228 265 309 372 463 561 575 814
RB 45 130 168 237 279 339 410 509 613 650 1032
Finish in door material RB 50 130 167 235 275 338 415 507 624 654 1072
1296 mm high
RB 60 130 182 253 295 355 452 549 687 722 1242
Alternatively, a 60 cm back infill panel
can be planned flush with the front for a
carcase depth of 560 mm. Pay attention
to front inside colour.
Back panel RB 130 V 480 502 525 544 565 632 765 804 1321
per metre
Finish in door material
1296 mm high
variable dimensions 300-1160 mm
Back panel RB 30 156 188 286 357 400 443 557 593 716 1013
RB 45 156 217 307 378 421 470 587 640 757 1269
Finish in door material RB 50 156 226 315 388 429 478 606 663 773 1354
1556 mm high
RB 60 156 252 342 418 477 533 645 719 830 1565
Alternatively, a 60 cm back infill panel
can be planned flush with the front for a
carcase depth of 560 mm. Pay attention
to front inside colour.
Back panel RB 156 V 529 548 571 611 655 730 751 891 1624
per metre
same as above, but
variable dimensions 300-1160 mm
The anti-tilt device which is supplied automatically must be fitted for room divider versions. 2.33
high-gloss lacquer
Item
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Surcharge for room divider version 2 MPRT 2 - - - - - - - 30
per unit
the unit is prepared to receive fixed back
panels
The rear carcase edge is neutral.
Back wall and side cladding 910 mm high RV 91 201 1185 291 - 614 769 - -
780 mm high RV 78 173 1019 254 - 528 656 - -
16 mm thick 390 mm high RV 39 89 510 129 - 265 328 - -
Max. length 2000 mm
per metre
2.34 The anti-tilt device which is supplied automatically must be fitted for room divider versions.
715/325 mm
Base units
A72
Mats are easily ordered via the head type in the kitchen planning system. Mats are automatically enclosed for all drawers,
deep drawers, internal drawers and interior deep drawers, as well as for all carousel shelves in corner base units.
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Base unit U 30 72 335 378 415 435 454 513 528 576 717
U 40 72 354 397 434 453 473 534 550 596 804
1 hinged door U 45 72 361 404 439 459 481 546 566 609 845
1 adjustable shelf
U 50 72 367 411 444 464 489 555 579 623 884
Matching accessories: U 60 72 391 431 467 493 518 581 609 658 973
Waste-disposal system ZA 4000 can be U 30 72 2 376 425 465 488 511 577 597 648 808
fitted from 450 mm width. 2
2 U 40 72 2 396 444 483 506 531 600 617 667 894
2 U 45 72 2 403 452 489 512 540 610 634 680 935
2 U 50 72 2 409 459 495 517 546 620 648 695 975
2 U 60 72 2 432 478 517 545 575 646 677 728 1064
Base unit U 80 72 548 634 707 745 786 908 937 1029 1452
U 90 72 563 649 717 757 803 929 971 1057 1536
2 hinged doors U 100 72 577 666 731 772 819 950 1001 1086 1618
1 adjustable shelf
U 120 72 608 698 757 799 853 991 1063 1143 1783
2 U 80 72 2 631 727 806 851 901 1038 1074 1172 1634
2 U 90 72 2 647 744 818 864 919 1059 1108 1200 1717
2 U 100 72 2 661 759 831 877 934 1080 1136 1229 1799
2 U 120 72 2 691 791 857 905 967 1122 1200 1285 1965
Base unit UA 30 72 555 603 638 657 677 736 752 801 929
1 front pull-out with
2 fixed pull-out trays
Base unit for towels UHT 30 72 404 447 485 505 523 584 601 649 787
1 hinged door 2 UHT 30 72 2 446 495 536 559 582 651 669 721 880
1 towel rail,
extendable on roller guides
Base unit for towels UHT 15 72 372 410 440 463 488 540 554 589 653
1 hinged door
1 towel rail,
extendable on roller guides
Base unit UA 15 72 A 732 768 799 822 847 900 914 949 993
1 deep drawer with
2 fixed wire baskets
Base unit for trays and baking tins UAB 15 72 A 731 768 800 823 848 902 916 952 997
1 deep drawer with
1 fixed wire basket and baking tray holder
2.35
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Base unit UAA 30 72 A 798 837 867 884 902 996 1012 1061 1176
1 larder pull-out for organising in any way
Arena shelf for pull-out larder unit ZI 30 AG 140 140 140 140 140 140 140 140 140
Anthracite grey
Orgaset 1 for pull-out larder unit ZI 30 11 AG 296 296 296 296 296 296 296 296 296
Anthracite grey
Set consists of 2 inserts.
Top insert comprising:
2 boxes (1.0 l), 1 box (2.1 l), 2 boxes
(2.0 l),
1 divider for knives, 2 lids, 2 support rails
bottom insert comprises:
1 box (3.2 l), 1 tray (1.1 L) with bottle
railing, 3 small dividers, 3 large dividers,
2 holders
Orgaset 2 for pull-out larder unit ZI 30 12 AG 135 135 135 135 135 135 135 135 135
Anthracite grey
Set consisting of:
2 boxes (1.0 l), 2 boxes (2.1 l), 2 lids,
1 large divider, 2 stpport rails
Base unit for provisions UT 60 72 A 977 1017 1053 1079 1104 1167 1195 1244 1559
1 hinged door
1 fixed basket
1 Orgaset
2 adjustable shelves in 410 mm depth
Base unit with interior deep drawers UISIA 30 72 979 1024 1062 1083 1103 1166 1182 1232 1343
UISIA 45 72 1007 1052 1087 1109 1132 1202 1223 1267 1476
1 hinged door UISIA 50 72 1013 1060 1093 1115 1140 1213 1238 1282 1518
1 internal drawer
2 interior deep drawers UISIA 60 72 1033 1077 1113 1140 1167 1236 1265 1314 1604
2 UISIA 30 72 2 1022 1072 1114 1137 1162 1233 1252 1305 1436
Must not be placed directly alongside the UISIA 45 72 2 1050 1100 1138 1163 1191 1268 1292 1340 1568
wall. Not available with Tip-On interior 2
finish. 2 UISIA 50 72 2 1056 1108 1145 1170 1199 1279 1308 1355 1610
2 UISIA 60 72 2 1077 1126 1166 1194 1226 1303 1334 1387 1696
2.36
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Base unit with interior drawer UAIS 30 72 1 687 735 771 792 813 873 889 939 1064
1 deep drawer
1 internal drawer
Matching accessories:
Bottle basket ZI 6 SG
Base unit with interior drawers UAIS 45 72 777 820 856 877 901 969 990 1034 1256
UAIS 50 72 783 827 862 882 907 980 1005 1049 1296
1 front pull-out UAIS 60 72 806 848 884 912 939 1006 1035 1084 1386
2 internal drawers
Matching accessories:
Driver for internal drawer EZIZ..
Base unit USA 30 72 840 867 904 939 980 1054 1071 1108 1323
USA 40 72 891 916 952 987 1035 1116 1121 1155 1437
1 drawer USA 45 72 909 933 970 1011 1057 1136 1150 1186 1487
1 front pull-out
1 internal drawer USA 50 72 925 953 989 1035 1077 1158 1177 1218 1537
USA 60 72 968 995 1031 1078 1127 1219 1239 1278 1640
Base unit US 30 72 477 502 538 575 615 686 704 741 974
US 40 72 504 530 567 607 649 721 737 773 1070
1 drawer US 45 72 515 543 577 617 663 741 754 791 1111
1 hinged door
1 adjustable shelf US 50 72 522 552 588 632 674 753 773 813 1152
US 60 72 554 582 619 665 712 802 823 861 1245
Matching accessories:
Waste-disposal system ZA 4000 can be
fitted from 450 mm width.
Base unit US 80 72 877 931 1005 1084 1167 1313 1344 1416 2017
US 90 72 912 967 1035 1116 1208 1362 1389 1463 2108
2 drawers US 100 72 937 997 1068 1158 1241 1397 1437 1518 2200
2 hinged doors
1 adjustable shelf
Base unit U3SA 30 72 922 961 989 1043 1107 1209 1237 1276 1638
U3SA 40 72 944 981 1013 1066 1128 1238 1267 1312 1735
3 drawers U3SA 45 72 959 999 1029 1083 1144 1267 1289 1335 1774
1 deep drawer
U3SA 50 72 978 1027 1058 1123 1178 1294 1325 1384 1837
120 cm unit is not available U3SA 60 72 1018 1064 1086 1154 1219 1344 1399 1431 1919
in ALNOBRIT and ALNOPOL! U3SA 80 72 1327 1361 1391 1475 1546 1683 1705 1745 2386
U3SA 90 72 1342 1382 1420 1494 1572 1713 1736 1764 2480
U3SA 100 72 1361 1413 1438 1535 1617 1761 1783 1822 2592
U3SA 120 72 1543 1587 1618 1718 1806 1967 1991 2055 2813
Base unit US2A 30 72 780 821 857 901 955 1074 1094 1136 1434
US2A 40 72 803 848 884 927 984 1108 1127 1175 1502
1 drawer US2A 45 72 816 863 895 940 996 1127 1149 1195 1530
2 deep drawers
US2A 50 72 836 886 920 966 1021 1159 1185 1245 1614
120 cm unit is not available US2A 60 72 865 910 941 992 1047 1182 1244 1275 1668
in ALNOBRIT and ALNOPOL! US2A 80 72 1120 1148 1175 1251 1324 1462 1487 1533 2085
US2A 90 72 1141 1170 1203 1273 1349 1493 1526 1557 2145
US2A 100 72 1171 1205 1232 1311 1394 1545 1569 1611 2226
US2A 120 72 1330 1364 1399 1478 1567 1727 1750 1801 2406
2.37
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Base unit U2A 30 72 611 651 683 711 755 854 865 920 1118
U2A 40 72 638 676 709 741 783 894 907 969 1206
2 deep drawers U2A 45 72 645 687 717 745 785 902 925 990 1240
120 cm unit is not available U2A 50 72 664 703 732 766 807 924 953 1022 1294
in ALNOBRIT and ALNOPOL! U2A 60 72 679 722 754 791 823 933 1012 1047 1373
U2A 80 72 925 949 979 1034 1083 1197 1237 1283 1749
U2A 90 72 944 966 1003 1055 1110 1236 1268 1302 1822
U2A 100 72 971 993 1026 1083 1142 1286 1306 1348 1907
U2A 120 72 1070 1097 1137 1189 1256 1406 1426 1471 2021
Base unit U2AIS 30 72 748 787 822 849 895 995 1007 1063 1260
U2AIS 40 72 759 798 830 861 905 1015 1028 1090 1321
2 deep drawers U2AIS 45 72 765 808 837 866 908 1023 1047 1113 1356
1 interior drawer at top
U2AIS 50 72 786 825 855 887 929 1047 1076 1145 1412
120 cm unit is not available U2AIS 60 72 801 844 874 911 945 1056 1134 1169 1489
in ALNOBRIT and ALNOPOL! U2AIS 80 72 1046 1069 1100 1155 1206 1319 1359 1406 1865
U2AIS 90 72 1064 1087 1124 1175 1231 1358 1389 1423 1937
Matching accessories:
Driver for internal drawer EZIZ.. U2AIS 100 72 1091 1114 1146 1204 1264 1409 1427 1470 2023
U2AIS 120 72 1217 1243 1285 1338 1407 1560 1581 1627 2181
Base unit with pull-out table USTSA 60 72 1426 1473 1494 1564 1630 1758 1815 1847 2319
1 drawer
1 pull-out tabletop, white on telescopic
tracks
1 drawer
1 deep drawer
Size of the extended tabletop:
844 x 551 mm
Max. load: 25 kg
3-D base unit UV 30 72 1 383 409 436 459 479 537 557 589 781
1 hinged door 2 UV 30 72 12 428 459 489 515 542 603 626 662 849
1 adjustable shelf
3-D base unit UVA 30 72 1 820 843 866 887 906 958 978 1008 1170
1 deep drawer with 2 UVA 30 72 12 866 893 919 944 968 1025 1048 1081 1238
2 fixed anthracite grey Arena shelves
Max. load-bearing capacity 7.5 kg per
shelf
2.38
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Corner base unit UEK 80 72 A 1254 1342 1414 1451 1494 1612 1641 1747 1996
UEK 90 72 A 1367 1456 1526 1562 1610 1722 1753 1849 2200
Divided inwards pivoting door with
cushioning 2 UEK 80 72 2 A 1326 1424 1500 1544 1594 1724 1760 1871 2156
2 carousel shelves UEK 90 72 2 A 1454 1551 1627 1671 1726 1853 1891 1993 2384
2
Arena shelf finish anthracite grey
Unit can be dismantled on site
Corner base unit UE 90 72 918 1004 1070 1106 1151 1248 1280 1375 1744
1 folding flap door 2 UE 90 72 2 1003 1098 1171 1212 1266 1379 1417 1518 1926
1 adjustable shelf
Corner base unit UEKL 110 72 A 1507 1551 1587 1608 1632 1702 1723 1767 1948
with 45 cm door
1 hinged door UEKL 115 72 A 1549 1595 1630 1650 1676 1748 1774 1818 2024
2 fully pivotable height adjustable with 50 cm door
carousel shelves LeMans
Arena shelf finish anthracite grey UEKL 125 72 A 1629 1671 1709 1734 1762 1831 1859 1908 2165
with 60 cm door
carcase width 1000 mm, without corner
infill panel 2 UEKL 110 72 2 A 1531 1581 1619 1642 1671 1747 1772 1818 2016
left version shown with 45 cm door
Corner inf. panel UEBE to be ordered 2 UEKL 115 72 2 A 1572 1623 1661 1684 1714 1793 1822 1868 2090
separately. Do not plan with set-forward with 50 cm door
base unit. 2 UEKL 125 72 2 A 1671 1719 1757 1788 1819 1897 1929 1981 2258
Matching accessories: with 60 cm door
self-closing ZID 29 AG
Corner base unit UESKL 110 72 A 1665 1693 1728 1770 1817 1898 1913 1949 2215
with 45 cm door
1 drawer UESKL 115 72 A 1711 1741 1777 1824 1867 1949 1970 2009 2293
1 hinged door with 50 cm door
2 fully pivotable height adjustable
carousel shelves LeMans UESKL 125 72 A 1794 1824 1862 1908 1955 2052 2073 2111 2438
Arena shelf finish anthracite grey with 60 cm door
Corner base unit UE 105 72 568 612 648 667 689 752 766 813 1009
with 40 cm door
1 hinged door UE 110 72 571 615 649 670 693 758 779 822 1047
1 adjustable shelf with 45 cm door
carcase width 1000 mm, without corner UE 115 72 574 618 652 672 696 764 789 832 1083
infill panel with 50 cm door
UE 125 72 585 626 662 687 714 778 807 855 1161
Corner inf. panel UEBE to be ordered with 60 cm door
left version shown separately.
2 UE 105 72 2 610 659 699 721 747 817 834 884 1100
with 40 cm door
2 UE 110 72 2 614 662 700 723 751 823 848 894 1137
with 45 cm door
2 UE 115 72 2 616 665 702 725 754 829 858 904 1174
with 50 cm door
2 UE 125 72 2 627 674 713 741 771 844 874 926 1251
with 60 cm door
2.39
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Corner base unit UES 105 72 759 785 824 864 907 981 998 1033 1321
with 40 cm door
1 drawer UES 110 72 768 796 831 872 918 998 1011 1049 1360
1 hinged door with 45 cm door
1 adjustable shelf
UES 115 72 773 804 839 885 928 1008 1028 1068 1399
carcase width 1000 mm, without corner with 50 cm door
infill panel UES 125 72 787 818 855 902 948 1040 1062 1100 1478
with 60 cm door
left version shown Corner inf. panel UEBE to be ordered
separately.
Corner infill panel UEBE 65 72 146 156 190 238 255 279 314 389 406
For corner base unit
fixed size corner infill mitred
planning dimensions 650 x 650 mm
Corner infill panel UEBE 20 72 V 199 256 301 349 388 448 469 529 621
same as above, but
variable corner infill panel mitred
Dimensions: 620 - 740 mm per side piece
Not available in ALNOART.
Infill panel for base units UBF 15 72 115 124 133 141 148 165 177 188 233
Finish in door material
fitted between wall and carcase
In ALNOART, ALNOCERA,
ALNOSATINA and ALNOVETRINA
door width 75 mm,
adjustment range in
carcase finish 77 - 150 mm.
Other front widths (at least 50 mm)
available with MPS 1 (apart from ALNO-
ART) on request.
Infill panel for base units UBFG 15 72 138 147 157 163 174 196 205 215 260
Finish in door material
for fitting next to appliances
In ALNOART, ALNOCERA,
ALNOSATINA and ALNOVETRINA
door width 75 mm,
adjustment range in
carcase finish 77 - 150 mm.
Other front widths (at least 50 mm)
available with MPS 1 (apart from ALNO-
ART) on request.
Corner infill panel for base units UEBF 65 72 190 195 232 283 299 326 360 436 476
Finish in door material
for 90° corner solution
for planning dimensions 650 x 650 mm
2.40
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Corner infill panel for base units UEBF 20 72 V 220 271 306 332 363 403 417 470 533
Finish in door material
for 90° corner solution
For variable planning dimensions
min. dimension 50 mm per side.
max. 180 mm on carcase front edge per
leg
Corner infill panel for base units UEBF 135 72 148 156 165 174 184 206 218 228 292
Finish in door material
for 135° corner solution
planning dimensions 259 x 259 mm
Corner infill panel for base units UEBF 135 72 V 164 172 209 257 275 303 337 410 438
Finish in door material
for 135° corner solution
Min. dimension 21 mm each side.
max. 180 mm on carcase front edge per
leg
Side cladding RBS 72 490 522 555 590 907 - 1049 1058 1077
for mounting on the carcase side
50 mm wide
Finish in door material
for carcase depth 560 mm
Side cladding RBS 72 R 598 633 666 699 1071 - 1230 1232 1354
for mounting on the carcase side
50 mm wide
Finish in door material
for room divider and carcase depth
560 mm
Side cladding RBS 729 1 R 635 680 715 751 1372 - 1569 1586 1608
for mounting on the carcase side
50 mm wide
Finish in door material
for room divider base unit 560 mm deep
and display unit 350 mm deep
2.41
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Height- and depth-variable side RBS RV 655 701 736 774 1414 - - 1685 1734
panelling
for mounting on the carcase side
50 mm wide
Finish in door material
for room dividers
Depth variable from 100 to 1164 mm
Height variable from 100 to 776 mm
Height- and depth-variable side RBSU V 621 663 701 736 1203 - - 1454 1485
panelling
for mounting on the carcase side
50 mm wide
Finish in door material
Depth variable from 100 to 732 mm
Height variable from 100 to 776 mm
Side cladding two-part RBS2 72 890 950 1014 1070 1544 - 1752 1771 1785
for mounting on the carcase side
50 mm wide
Finish in door material
for carcase depth 560 mm
Side cladding two-part RBS2 72 R 1077 1141 1208 1259 1807 - 2053 2075 2091
for mounting on the carcase side
50 mm wide
Finish in door material
for room divider and carcase depth
560 mm
Side cladding two-part RBS2 729 1 R 1148 1229 1298 1358 2321 - 2640 2654 2691
for mounting on the carcase side
50 mm wide
Finish in door material
for room divider base unit 560 mm deep
and display unit 350 mm deep
Side panelling depth adjustable two- RBS2 72 RV 1346 1427 1511 1574 2260 - - 2570 2581
part
for room dividers
for mounting on the carcase side
50 mm wide
Finish in door material
Depth variable from 100 to 1164 mm
2.42
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Side panelling depth adjustable two- RBS2 72 V 1125 1202 1281 1354 1951 - - 2201 2259
part
for mounting on the carcase side
50 mm wide
Finish in door material
Depth variable from 100 to 732 mm
Base unit UA 60 33 419 439 454 472 491 529 572 589 735
UA 80 33 537 547 558 588 616 666 681 703 918
1 deep drawer UA 90 33 557 566 581 607 639 692 707 721 955
UA 100 33 572 582 596 624 659 714 723 744 988
UA 120 33 638 650 666 695 729 788 798 818 1058
Infill panel for base units UBF 15 33 98 108 114 124 135 155 165 173 218
Finish in door material
fitted between wall and carcase
In ALNOART, ALNOCERA,
ALNOSATINA and ALNOVETRINA
door width 75 mm,
adjustment range in
carcase finish 77 - 150 mm.
Other front widths (at least 50 mm)
available with MPS 1 (apart from ALNO-
ART) on request.
Side cladding RBS 33 469 502 536 567 806 - 923 927 938
for mounting on the carcase side
50 mm wide
Finish in door material
for carcase depth 560 mm
2.43
high-gloss lacquer
Item
carcase height 715 mm
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
carcase depth 580 mm
width mm
Laminate
universal
veneer/
hinge
finish
Unit without worktop or plinth
Base shelf unit 600 UR3S 60 72 1490 3557 1729 1876 2305 2618 - -
900 UR3S 90 72 1812 4790 2162 2382 3012 3452 - -
3 drawers in ELITE
Base shelf unit 300 UR 30 72 361 1596 512 614 993 1233 - -
1 adjustable shelf variable in width UR 00 72 V 518 2009 733 880 1252 1511 - -
from 150 to 600 mm
For colours and versions,
refer to colour matrix carcase
Base shelf unit 150 UR 15 72 313 1451 440 528 903 1002 - -
for trays and towels
Base shelf unit for bottles and scoops 150 URF 15 72 402 1649 561 673 1027 1172 - -
for bottles or scoops
4 fixed shelves
Order matching rustic wooden container
SCH 11 11 1 separately
Base end shelf unit, angled 300 URA 30 72 L/R 369 1478 520 624 921 1107 - -
1 fixed shelf
2.44
high-gloss lacquer
Item
carcase height 715 mm
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Unit without worktop or plinth
Base end shelf unit 300 URE 30 72 L/R 338 1330 487 584 813 973 - -
1 fixed shelf
Infill panel for base units 150 UBK 15 72 L/R 61 264 74 - 138 173 - -
Finish in carcase material
flush with carcase
fitted between wall and carcase
Infill panel for base units 150 UBT 15 72 67 283 88 - 150 181 - -
Finish in carcase material
for depth adjustment between carcase
and wall
Corner infill panel for base units UEBK 20 72 V 93 385 116 - 193 286 - -
Finish in carcase material
flush with carcase
For variable planning dimensions
for 90° corner solution
Min. dimension 25 mm each side
max. 180 mm on carcase front edge per
leg
Corner infill panel for base units UEBK 135 72 V 90 380 113 - 190 284 - -
Finish in carcase material
flush with carcase
For variable planning dimensions
for 135° corner solution
Min. dimension 21 mm each side.
Max. 180 mm at the carcase front edge
per side.
Infill panel for base units 150 UBK 15 33 L/R 51 255 65 - 134 153 - -
325 mm high
Finish in carcase material
flush with carcase
fitted between wall and carcase
2.45
2.46
A72
Surcharge per mat anthracite
Mats are easily ordered via the head type in the kitchen planning system. Mats are automatically enclosed for all drawers,
deep drawers, internal drawers and interior deep drawers, as well as for all carousel shelves in corner base units.
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Base unit for built-under oven UHS 60 72 452 457 467 479 508 567 571 576 675
niche height 585 - 595 mm
1 drawer
with low frame
Base unit for built-under oven UMS 60 72 559 566 578 593 629 654 662 673 897
for 16 mm thick worktops
Niche height 450 mm
1 drawer
Base unit for built-under oven UH 60 72 208 213 222 235 260 310 314 320 431
Niche height 580 - 595 mm
with front panel
Base unit for hob with integrated UK2A 60 72 835 880 912 963 1017 1153 1215 1245 1639
control panel UK2A 80 72 1097 1123 1151 1226 1299 1437 1463 1509 2062
UK2A 90 72 1117 1145 1178 1248 1325 1469 1501 1532 2123
1 fixed front panel
1 cable protection shelf UK2A 100 72 1144 1178 1206 1284 1368 1520 1542 1584 2200
2 deep drawers UK2A 120 72 1227 1260 1295 1375 1463 1622 1645 1696 2306
Base unit for induction hob UKHS2A 60 72 1 1050 1094 1126 1177 1230 1369 1431 1462 1845
UKHS2A 80 72 1 1347 1374 1403 1478 1551 1690 1716 1762 2302
1 shelf to prevent accidental contact UKHS2A 90 72 1 1410 1437 1471 1540 1618 1763 1795 1826 2402
1 drawer with low frame
2 deep drawers UKHS2A 100 72 1 1475 1510 1537 1616 1699 1852 1876 1918 2517
Base unit for hob UKHS2A 60 72 1002 1049 1079 1131 1184 1321 1384 1415 1800
UKHS2A 80 72 1301 1328 1356 1431 1505 1643 1669 1715 2257
1 heat protection shelf UKHS2A 90 72 1362 1389 1423 1493 1570 1715 1747 1777 2355
1 drawer
2 deep drawers UKHS2A 100 72 1430 1464 1492 1570 1654 1806 1830 1872 2474
UKHS2A 120 72 1630 1664 1699 1779 1868 2029 2052 2103 2693
120 cm unit is not available
in ALNOBRIT and ALNOPOL!
20 mm clearance to bottom edge of
worktop. During planning and installation,
it is essential to observe the specifications
of the electrical appliance manufacturer!
120 cm unit with low frame.
2.47
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Base unit for retractable or hob-level UKU2A 90 72 1117 1145 1178 1248 1325 1469 1501 1532 2123
extractor UKU2A 100 72 1144 1178 1206 1284 1368 1520 1542 1584 2200
UKU2A 120 72 1227 1260 1295 1375 1463 1622 1645 1696 2306
2 deep drawers
Base unit for retractable or hob-level UKU2A 90 72 1 1117 1145 1178 1248 1325 1469 1501 1532 2123
extractor UKU2A 100 72 1 1144 1178 1206 1284 1368 1520 1542 1584 2200
UKU2A 120 72 1 1227 1260 1295 1375 1463 1622 1645 1696 2306
1 fixed panel
2 deep drawers
Corner sink base unit SPE 105 72 540 584 620 641 662 725 741 787 987
with 40 cm door
1 hinged door SPE 110 72 544 588 622 643 666 732 753 797 1026
1 fixed infill panel with 45 cm door
carcase width 1000 mm, without corner SPE 115 72 546 591 624 645 669 738 764 807 1063
infill panel with 50 cm door
SPE 125 72 558 599 635 661 687 752 780 829 1140
Corner inf. panel UEBE to be ordered with 60 cm door
left version shown separately.
2 SPE 105 72 2 576 625 664 686 712 782 800 850 1067
Matching accessories: with 40 cm door
Waste-disposal system ZA 401. 2 SPE 110 72 2 579 628 665 689 716 788 813 859 1105
with 45 cm door
2 SPE 115 72 2 589 640 675 699 727 804 832 879 1155
with 50 cm door
2 SPE 125 72 2 600 648 686 715 746 818 850 902 1232
with 60 cm door
Corner sink base unit SPD 90 72 866 924 1001 1056 1139 1228 1263 1328 1615
with 40 cm door
1 hinged door 2 SPD 90 72 2 910 971 1053 1110 1197 1294 1331 1400 1706
1 fixed infill panel with 40 cm door
Unit can be dismantled on site
Matching accessories:
stainless steel shelf ZIT 90 E
Waste-disposal system ZA 401.
2.48
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Sink base unit SP 45 72 344 387 421 441 464 528 550 593 832
SP 50 72 352 397 429 450 474 540 565 609 875
1 hinged door SP 60 72 375 416 452 477 504 565 594 643 963
1 fixed infill panel
2 SP 45 72 2 386 435 472 495 523 594 618 665 924
Matching accessories: 2 SP 50 72 2 395 444 480 504 532 606 634 681 966
Drip inserts EZIT .. A SP 60 72 2 417 464 503 531 562 631 663 715 1056
2
Sink base unit SP 80 72 529 616 689 728 770 893 922 1015 1444
SP 90 72 546 631 701 741 787 913 956 1042 1529
2 hinged doors SP 100 72 560 650 715 756 805 935 986 1073 1613
2 fixed interior panels
SP 120 72 590 673 743 794 847 970 1027 1124 1774
Matching accessories: 2 SP 80 72 2 614 712 791 835 886 1024 1060 1160 1628
Drip inserts EZIT .. A SP 90 72 2 629 727 803 849 904 1044 1093 1187 1713
2
2 SP 100 72 2 645 744 817 864 920 1067 1124 1218 1795
2 SP 120 72 2 674 767 845 902 962 1102 1165 1269 1957
Sink base unit SPA 45 72 320 362 397 417 440 503 524 567 809
SPA 50 72 328 371 405 425 449 515 540 583 852
1 door loose SPA 60 72 350 392 426 454 480 540 569 617 939
State when ordering if no handle drilling 2 SPA 45 72 2 362 410 448 471 499 568 593 640 902
required. 2 SPA 50 72 2 371 419 456 479 507 581 609 656 942
2 SPA 60 72 2 392 439 477 508 538 606 639 690 1031
Sink base unit SPA 45 72 1 462 504 537 563 589 648 678 723 1027
SPA 50 72 1 467 509 543 569 596 655 685 731 1038
1 deep drawer SPA 60 72 1 480 523 558 585 612 673 704 751 1066
450 mm deep
2 SPA 45 72 12 504 549 586 616 645 713 743 793 1115
Matching accessories: 2 SPA 50 72 12 509 555 593 623 652 720 752 801 1127
set of Servodrive accessories ZAZ 7 SPA 60 72 12 523 570 609 640 670 740 772 823 1158
2
Sink base unit SP2A 60 72 783 827 858 896 928 1040 1120 1156 1481
SP2A 80 72 1034 1057 1088 1144 1194 1309 1349 1396 1863
2 deep drawers SP2A 90 72 1050 1073 1111 1163 1219 1346 1378 1412 1934
Upper deep drawer with low back panel
350 mm deep SP2A 100 72 1071 1093 1127 1185 1244 1390 1410 1454 2013
SP2A 120 72 1116 1139 1174 1233 1304 1512 1533 1579 2130
120 cm width is not available in SP2A 60 72 2 826 875 909 950 986 1107 1189 1227 1572
ALNOBRIT and ALNOPOL! 2
The max. installation height for sinks incl. 2 SP2A 80 72 2 1076 1104 1139 1199 1253 1375 1418 1468 1954
waste in 40 mm worktops is as follows: 2 SP2A 90 72 2 1092 1120 1162 1216 1276 1412 1447 1484 2026
centred 322 mm 2 SP2A 100 72 2 1114 1142 1179 1239 1303 1457 1479 1526 2105
outside 230 mm 2 SP2A 120 72 2 1085 1112 1148 1207 1276 1457 1479 1526 2105
Matching accessories:
set of Servodrive accessories ZAZ 7
XXM waste separation systems ZA ..3 AG
fit bottom deep drawer.
2.49
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Sink base unit with waste separation SPAMH 45 72 916 960 996 1016 1039 1108 1129 1172 1384
and deep drawer with reduced depth SPAMH 50 72 961 1004 1038 1060 1083 1157 1181 1224 1461
SPAMH 60 72 1018 1061 1097 1126 1153 1219 1248 1296 1584
1 deep drawer with waste separation
system 2 SPAMH 45 72 2 949 997 1034 1058 1085 1160 1184 1230 1459
with reduced-depth deep drawer 2 SPAMH 50 72 2 991 1040 1077 1101 1128 1208 1235 1281 1534
400 mm deep for use with SPAMH 60 72 2 1062 1110 1149 1180 1211 1284 1318 1369 1677
low-lying service valves 2
or drains
1 cover shelf
waste separation system consisting of:
45 cm wide:
2 containers, 14 litres
50 cm wide:
2 containers 10 litres
1 container lid
1 container 14 litres
60 cm wide:
2 containers 10 litres
1 container lid
1 container 20 litres
Sink base unit with waste separation SPAM 45 72 958 1002 1036 1058 1081 1149 1170 1214 1423
SPAM 50 72 1002 1044 1080 1102 1125 1197 1222 1266 1500
1 deep drawer with waste separation SPAM 60 72 1057 1100 1135 1164 1190 1257 1287 1334 1620
system XXL 500 mm deep
1 cover shelf 2 SPAM 45 72 2 989 1037 1075 1099 1126 1201 1225 1271 1497
2 SPAM 50 72 2 1031 1080 1118 1141 1169 1248 1276 1322 1573
waste separation system consisting of: SPAM 60 72 2 1100 1148 1187 1218 1248 1323 1356 1407 1713
45 cm wide: 2
1 container 12 litres
2 containers 8 litres each
1 container lid
2 containers 2.5 litres each
50 cm wide:
1 container 12 litres
2 containers 8 litres each
1 container lid
2 containers 2.5 litres each
60 cm wide:
1 container 18 litres
2 containers 8 litres each
1 container lid
3 containers 2.5 litres each
2.50
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Sink base unit with waste separation SPAM 60 72 3 1908 1951 1987 2016 2043 2112 2142 2190 2433
1 deep drawer with waste separation 2 SPAM 60 72 3 2 1929 1977 2016 2046 2077 2152 2185 2236 2495
system
450 mm deep
waste separation system consisting of:
1 container 40 litres
1 organic waste pin, 6 litre, with lid
1 container, 1.2 litres
System storage lid
The 40 litre bin accommodates a 35 litre
waste bag (CH).
Front panel GSB 45 72 124 151 169 198 224 286 294 325 560
GSB 60 72 144 169 195 228 258 308 325 361 655
for integrated dishwashers
1 front panel without handle drilling
Front panel GSBV 45 72 147 167 197 231 267 318 340 385 645
GSBV 60 72 165 187 216 256 294 339 369 419 763
for fully integrated dishwashers
2 GSBV 45 72 2 187 212 245 283 324 386 411 459 740
1 front panel with handle drilling 2 GSBV 60 72 2 205 232 265 308 351 407 441 494 858
Front panel GSBV 45 72 4 255 306 348 372 400 480 504 571 845
GSBV 60 72 4 278 330 373 408 441 512 595 630 996
for fully integrated dishwashers
1 front panel doweled with handle drilling
Front panel FWI 60 72 147 189 224 252 279 339 369 419 763
for fully integrated washing machines 2 FWI 60 72 2 190 237 276 308 339 407 441 494 858
Front panel FKI 60 72 166 209 246 273 300 360 391 440 782
2 FKI 60 72 2 209 258 297 328 359 427 462 514 877
for fully integrated refrigerators and
freezers
1 front panel with handle drilling
2.51
2.52
Room dividers
Display units/
A72
A72
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without worktop or plinth 1 2 3 4 5 6 7 8 9 10
Display base unit with unit door V 30 72 396 439 474 495 513 568 584 633 775
V 40 72 413 456 492 511 531 589 604 651 861
1 hinged door V 45 72 419 462 497 516 539 598 619 663 902
2 adjustable shelves
V 50 72 426 471 505 524 548 609 634 678 945
V 60 72 450 491 525 550 575 632 661 711 1032
Display unit with glass door VGN 45 72 786 786 786 786 786 786 786 786 786
VGN 50 72 811 811 811 811 811 811 811 811 811
in neutral glass front No. 535 and No. 538 VGN 60 72 857 857 857 857 857 857 857 857 857
1 glass door
2 adjustable glass shelves
Display unit with sliding door VST 90 72 1261 1313 1348 1382 1416 1484 1506 1549 1745
VST 100 72 1285 1339 1373 1411 1445 1514 1538 1582 1804
Carcase depth 360 mm incl. VST 120 72 1352 1405 1438 1481 1523 1593 1623 1672 1945
10 mm track system
2 carcases of the same width
2 adjustable glass shelves each
1 sliding door without handle
1 set of rails for on-site installation
Not available in ALNOART.
Unit interior in visible side colours carcase
finish.
Note 10 mm track height on worktops/
cover plates flush with the front.
The anti-tilt device which is supplied automatically must be fitted for room divider versions. 2.53
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Surcharge for room divider version 1 MPRT 1 144 144 144 144 144 144 144 144 144
per unit
the unit is prepared to receive fixed back
panels
The rear carcase edge colour matches
the front carcase edge.
The room divider can be freely planned
and does not depend on the type of unit.
Back panel RB 30 72 126 174 209 230 250 307 323 374 531
RB 40 72 136 180 217 236 259 318 335 383 611
Finish in door material RB 45 72 141 183 218 239 262 324 346 391 650
711 mm high
RB 50 72 144 187 221 243 265 332 357 402 687
Alternatively, a 60 cm back infill panel RB 60 72 153 195 232 259 286 345 375 424 766
can be planned flush with the front for a
carcase depth of 560 mm. Pay attention
to front inside colour.
Back panel RB 72 V 281 299 318 360 401 459 476 493 854
per metre
same as above, but
variable dimensions 300-1160 mm
Back panel RB2 30 72 226 277 349 390 424 487 550 590 863
RB2 40 72 244 287 363 405 435 503 568 606 995
Finish in door material RB2 45 72 253 294 366 411 442 509 588 619 1066
711 mm high (321+386 mm)
RB2 50 72 260 301 372 416 451 523 608 632 1134
Alternatively, a 60 cm back infill panel RB2 60 72 275 313 389 447 480 540 638 658 1268
can be planned flush with the front for a
carcase depth of 560 mm. Pay attention
to front inside colour.
2.54 The anti-tilt device which is supplied automatically must be fitted for room divider versions.
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Back panel RB 30 130 158 228 265 309 372 463 561 575 814
RB 45 130 168 237 279 339 410 509 613 650 1032
Finish in door material RB 50 130 167 235 275 338 415 507 624 654 1072
1296 mm high
RB 60 130 182 253 295 355 452 549 687 722 1242
Alternatively, a 60 cm back infill panel
can be planned flush with the front for a
carcase depth of 560 mm. Pay attention
to front inside colour.
Back panel RB 130 V 480 502 525 544 565 632 765 804 1321
per metre
Finish in door material
1296 mm high
variable dimensions 300-1160 mm
The anti-tilt device which is supplied automatically must be fitted for room divider versions. 2.55
high-gloss lacquer
Item
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Surcharge for room divider version 2 MPRT 2 - - - - - - - 30
per unit
the unit is prepared to receive fixed back
panels
The rear carcase edge is neutral.
Back wall and side cladding 715 mm high RV 72 158 935 235 - 485 751 - -
16 mm thick
Max. length 2000 mm
per metre
2.56 The anti-tilt device which is supplied automatically must be fitted for room divider versions.
3. Wall/dresser units
A78 A72 Wall units 1300 / 910 mm
910 mm high
780 mm high
3.01
650 mm high
3.02
Item
width mm
universal
hinge
Surcharge for carcase shelf with LED handle profile 6.1 watts 268 MP LED K 30 210
8.6 watts 368 MP LED K 40 236
handle profile radiating upwards and downwards 9.8 watts 418 MP LED K 45 250
LED lighting
Cable drill hole 44 mm from right-hand carcase edge 11.0 watts 468 MP LED K 50 262
1800 mm connecting lead with plugs 12.3 watts 518 MP LED K 55 273
Energy efficiency class A+ 13.5 watts 568 MP LED K 60 287
18.5 watts 768 MP LED K 80 345
Not possible for: open shelf units, dish drying units, corner wall units,
Neutral white approx. units with 2 hinged doors (except STARLINE), with sliding doors, roller 20.9 watts 868 MP LED K 90 371
4,000 K shutters or slats, as well as for cooker hoods and microwaves. 23.4 watts 968 MP LED K 100 395
Custom designs not possible. 28.3 watts 1168 MP LED K 120 453
Connecting accessories:
We recommend light control starter set. It must be ordered separately.
Additionally order ZLZ 53 IC for wattages higher than 30 watts. Light control starter set ZLZ 52 IC 240
Light control follow-on set ZLZ 53 IC 169
Additionally order ZLZ 72 for control by App. App control ZLZ 72 192
LED transformer 50 W ZLZ 54 84
Alternatively, transformers and switches can be used.
LED transformer 30 W ZLZ 55 72
LED transformer 15 W ZLZ 59 53
Standard switch ZLZ 8 29
LED touch dimmer ZLZ 26 94
Touch sensor switch ZLZ 12 48
Light sensor switch ZLZ 25 85
Wireless switch ZLZ 49 94
Extension cable ZLZ 181 22
Surcharge for carcase shelf with LED handle profile 3.5 watts 300 MP LED KU 30 167
4.9 watts 400 MP LED KU 40 183
handle profile radiating downwards only 5.6 watts 450 MP LED KU 45 192
LED lighting
Cable drill hole 44 mm from right-hand carcase edge 6.3 watts 500 MP LED KU 50 198
1800 mm connecting lead with plugs 7.7 watts 600 MP LED KU 60 212
Energy efficiency class A+ 10.5 watts 800 MP LED KU 80 251
11.9 watts 900 MP LED KU 90 269
Please order transformer and switch separately, ZLZ 54, 55, 59.
Neutral white approx. Not possible for: open shelf units, dish drying units, corner wall units, 13.3 watts 1000 MP LED KU 100 283
4,000 K units with 2 hinged doors (except STARLINE), with sliding doors, roller 16.1 Watts 1200 MP LED KU 120 322
shutters or slats, as well as for cooker hoods and microwaves. Connecting accessories:
Custom designs not possible. Light control starter set ZLZ 52 IC 240
We recommend light control starter set. It must be ordered separately. Light control follow-on set ZLZ 53 IC 169
Additionally order ZLZ 53 IC for wattages higher than 30 watts. App control ZLZ 72 192
LED transformer 50 W ZLZ 54 84
Additionally order ZLZ 72 for control by App. LED transformer 30 W ZLZ 55 72
Alternatively, transformers and switches can be used. LED transformer 15 W ZLZ 59 53
Standard switch ZLZ 8 29
Touch sensor switch ZLZ 12 48
LED touch dimmer ZLZ 26 94
Light sensor switch ZLZ 25 85
Wireless switch ZLZ 49 94
Extension cable ZLZ 181 22
Surcharge for wall unit with LED illuminated glass shelf 4,7 watts 418 MP LED BO 45 424
5,4 watts 468 MP LED BO 50 430
installed instead of the fixed base shelf 6.8 watts 568 MP LED BO 60 440
consisting of: 9,6 watts 768 MP LED BO 80 495
2 panels MDF with aluminium profile at the front, 11 watts 868 MP LED BO 90 509
matt silk toughened safety glass, loosely laid on top 12.4 watts 968 MP LED BO 100 532
30 mm high
LED lighting
Neutral white approx. Switch at front right
4,000 K LED transformer 15 W
1800 mm connecting lead with plugs
Energy efficiency class A+
Shelves are replaced by glass shelves.
Not possible for: open shelf units, dish drying units, corner wall units,
units with 2 hinged doors (except STARLINE), with sliding doors, roller
shutters or slats, as well as for cooker hoods and microwaves.
Custom designs not possible.
3.03
Item
width mm
universal
hinge
Additional charge for cable drillings bottom MPKBU 22
top MPKBO 22
8 mm dia. cable drill holes 200 mm deep at centre of wall units and
Edition Fly units. Flexible on request: on units > 600 mm with 2 drill
holes in any position (min. distance from carcase edge 85 mm), in
corner wall units or Edition-Fly corner base units.
Not possible with extractor hood units and end shelf units
Only at bottom for Edition Fly.
Not possible in end shelf units! Not possible with Edition Fly tall units
from a niche height of 1446 mm. Only possible in base panel for
Edition Fly and Softlift units.
Vertical light slot can be provided for glass door cabinets and shelf
units.
Two light slots on the left and right of the carcase.
2 x ZLV 180 IN: carcase height 390 mm for Softlift, Flap door, Parallel
lift-up unit
2 x ZLV 265 IN: carcase height 390 and 520 mm
2 x ZLV 415 IN: carcase height 650 and 780 mm for Units with upward
folding door and Softlift
2 x ZLV 630 IN: carcase height 780 mm and 910 mm, base shelf units
715 and 780 mm high
2 x ZLV 1150 IN: carcase height 1300 mm
LED recessed light with colour control 2.6 watts 180 ZLV 180 IN 66
3.5 watts 265 ZLV 265 IN 74
Laminate enclosure matt black 6 watts 415 ZLV 415 IN 94
Specified width includes 2 x 15 mm end lids
10.3 watts 630 ZLV 630 IN 126
We recommend light control starter set. It must be ordered separately. 18.4 watts 1150 ZLV 1150 IN 193
Additionally order ZLZ 61 IN for wattages higher than 60 watts. Connecting accessories:
Order light slot separately: MPKBV L. Light control starter set ZLZ 60 IN 150
Light control follow-on set ZLZ 61 IN 80
Extension cable ZLZ 181 22
Hinged door with Tip-On per hinged door 35
per flap door with tall units 35
The kitchen planning system provides the option of ordering Tip-On
for hinged doors as head version with version D25. The mechanical
Tip-On pen in dark grey is drilled into the carcase edge.
Flap doors on tall units become flap doors with Tip-On.
Tip-On is fitted in the bottom carcase panel for US80-US100, SP80-
SP100. Hinged appliance doors cannot be used.
3.04
Item
width mm
universal
hinge
LED built-in light linear 3.8 watts 267 ZLL 30 A 100
5.3 watts 367 ZLL 40 A 100
Aluminium profile with integrated LED light 6 watts 417 ZLL 45 A 103
1800 mm connection cable with plug connection
Energy efficiency class A+ 6.8 watts 467 ZLL 50 A 107
7.5 watts 517 ZLL 55 A 110
We recommend light control starter set. It must be ordered 8.3 watts 567 ZLL 60 A 113
separately. 11.3 watts 767 ZLL 80 A 132
Additionally order ZLZ 53 IC for wattages higher than 30 watts.
12.8 watts 867 ZLL 90 A 141
Additionally order ZLZ 72 for control by App. 14.3 watts 967 ZLL 100 A 150
17.3 watts 1167 ZLL 120 A 160
Alternatively, transformers and switches can be used. Connecting accessories:
Neutral white approx.
Order light slot separately: MPKBU L / MPKBO L. Light control starter set ZLZ 52 IC 240
4,000 K Light control follow-on set ZLZ 53 IC 169
App control ZLZ 72 192
LED transformer 50 W ZLZ 54 84
LED transformer 30 W ZLZ 55 72
LED transformer 15 W ZLZ 59 53
Standard switch ZLZ 8 29
LED touch dimmer ZLZ 26 94
Light sensor switch ZLZ 25 85
Wireless switch ZLZ 49 94
Extension cable ZLZ 181 22
linear LED recessed light with colour control 3.5 watts 267 ZLL 30 IC 107
4.9 watts 367 ZLL 40 IC 110
stainless steel-effect 5.6 watts 417 ZLL 45 IC 115
Aluminium profile with integrated LED light
Colour temperature infinitely variable from warm white to 6.3 watts 467 ZLL 50 IC 119
cold white. 7 watts 517 ZLL 55 IC 124
1800 mm connection cable with plug connection 7.7 watts 567 ZLL 60 IC 130
Energy efficiency class A+ 10.5 watts 767 ZLL 80 IC 153
We recommend light control starter set. It must be ordered 11.9 watts 867 ZLL 90 IC 164
separately. 13.3 watts 967 ZLL 100 IC 176
Additionally order ZLZ 53 IC for wattages higher than 30 watts. 16.1 Watts 1167 ZLL 120 IC 193
LED built-in light linear, short with colour control set of 3 ZLS 501 IC 575
per piece ZLI 501 IC 125
White glass cover Connecting accessories:
LED - 2.8 W / 12 V DC 250 x 50 x 6 mm
Colour temperature infinitely variable from warm white to Light control starter set ZLZ 52 IC 240
cold white. Light control follow-on set ZLZ 53 IC 169
1800 mm connection cable with plug connection App control ZLZ 72 192
Energy efficiency class A+
Set consisting of:
3 LED lights
Light control starter set
- 30-watt transformer with 6-way distributor
- Control module
colour control approx.
- 4-channel radio remote control
2,700 - 5,700 K
Can be extended up to 6 lights
Additionally order ZLZ 72 for control by App.
Order light slot separately: MPKBU L / MPKBO L.
3.05
Item
width mm
universal
hinge
LED built-in light ZL 55 E 39
stainless steel-effect Connecting accessories:
LED - 4 W / 12 V DC 250 lm Light control starter set ZLZ 52 IC 240
Installation dimension: Ø 55 mm, 12 mm installed depth Light control follow-on set ZLZ 53 IC 169
1800 mm connecting lead with plugs App control ZLZ 72 192
Energy efficiency class A+ LED transformer 50 W ZLZ 54 84
We recommend light control starter set. It must be ordered LED transformer 30 W ZLZ 55 72
separately. LED transformer 15 W ZLZ 59 53
Additionally order ZLZ 53 IC for wattages higher than 30 watts. Standard switch ZLZ 8 29
LED touch dimmer ZLZ 26 94
Additionally order ZLZ 72 for control by App. Light sensor switch ZLZ 25 85
Neutral white approx.
Alternatively, transformers and switches can be used. Wireless switch ZLZ 49 94
4,000 K Extension cable ZLZ 181 22
Order light slot separately: MPKBU L / MPKBO L.
LED built-in light ZL 78 E 97
stainless steel-effect Connecting accessories:
High-power LED chip Recessed switch set ZLZ 91 A 48
230 V 50/60 Hz, 3 watts, Ø 100 mm. Surface-mounted switch set ZLZ 21 E 51
Installation dimension: Ø 78 mm, 13 mm installation depth Distributor box ZLZ 91 31
2000 mm connecting lead with plugs Standard switch ZLZ 8 29
Energy efficiency class A++
Wireless switch ZLZ 49 94
Plan distributor ZLZ 91 for the electrical connection. Light sensor switch ZLZ 25 85
Extension cable ZLZ 78 34
no transformer necessary
LED built-in light with colour control Set of 3 ZLS 553 T 322
per piece ZLU 553 T 66
titanium-effect
LED - 2x2 W / 12 V DC
with wireless dimmer for infinitely variable adjustment between
warm and cool white
Installation dimension: Ø 55 mm, 10 mm installed depth
2000 mm connection cable with plugs
Energy efficiency class A+
Set consisting of:
3 LED lights
Electronic transformer 30 W
1 wireless dimmer with on and off function
colour control approx.
mains cable 1500 mm with Euro plug
3,200 - 5,500 K
Can be extended up to 6 lights
3.06
A78 A72
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit O 45 130 453 521 562 619 689 786 887 923 1282
O 50 130 454 521 561 622 699 791 904 935 1334
1300 mm high O 60 130 466 533 572 631 725 817 952 983 1467
1 hinged door
3 adjustable shelves
Wall unit with glass door OGN 45 130 603 671 712 769 839 936 1037 1073 1432
1300 mm high
in neutral glass front No. 538
1 glass door
3 adjustable glass shelves
Side cladding RBS 130 3 1 558 589 617 624 860 - 1021 1038 1195
for mounting on the carcase side
1300 mm high
50 mm wide
Finish in door material
for carcase depth 350 mm
Wall unit O 30 91 316 374 409 444 481 529 562 602 758
O 40 91 332 390 428 459 497 561 591 624 864
1 hinged door O 45 91 339 397 436 472 508 571 610 649 917
2 adjustable shelves
O 50 91 342 398 439 479 520 581 622 653 923
O 55 91 357 413 450 491 534 597 631 682 1023
O 60 91 365 418 455 495 541 602 638 694 1042
Wall unit O 80 91 524 642 718 780 855 982 1042 1111 1598
O 90 91 540 655 733 806 878 1004 1081 1160 1701
2 hinged doors O 100 91 559 671 747 829 904 1032 1107 1187 1811
2 adjustable shelves
Wall unit O2T 80 91 537 654 730 792 867 995 1055 1122 1610
O2T 90 91 552 667 747 819 891 1017 1093 1173 1714
2 doors with identical door handing right
or left
2 adjustable shelves
Wall unit with draining rack OT 60 91 780 837 875 920 966 1030 1066 1113 1468
1 door with 155° hinges
1 draining rack
2 wire mesh shelves
1 removable drip tray
3.07
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit with draining rack OT 90 91 1033 1150 1226 1296 1371 1495 1570 1650 2164
2 doors with 155° opening angle
1 draining rack
2 wire mesh shelves
1 removable drip tray
Wall unit for spices OS 30 91 456 513 549 582 621 669 701 742 936
OS 45 91 477 534 574 610 647 710 748 787 1103
1 door with spice rack OS 50 91 488 545 581 623 660 724 762 802 1162
1 adjustable shelf
1 fixed shelf OS 60 91 504 559 597 644 689 753 791 836 1271
Wall unit with glass door OG 45 91 594 652 691 721 759 823 853 886 1113
OG 50 91 598 653 694 729 765 826 863 902 1186
1 glass door OG 60 91 617 671 707 753 796 859 895 939 1291
2 adjustable glass shelves
For glass choices refer to
section Glass types
Unit interior in visible side colours carcase
finish.
Not available for ALNOCERA, ALNOSATINA
and ALNOVETRINA.
Wall unit with glass doors OG 90 91 1039 1155 1233 1306 1378 1503 1581 1660 2176
OG 100 91 1059 1171 1246 1329 1404 1532 1607 1687 2285
2 glass doors
2 adjustable glass shelves
For glass choices refer to
section Glass types
Wall unit with segment door OGS 45 91 367 500 562 622 731 - - 965 1021
OGS 50 91 375 513 579 648 754 - - 992 1048
1 segment hinged door OGS 60 91 393 540 613 684 802 - - 1054 1101
2 adjustable glass shelves
For glass choices refer to
section Glass types
3.08
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit with glass door OGN 45 91 824 824 824 824 824 824 824 824 824
OGN 50 91 848 848 848 848 848 848 848 848 848
in neutral glass front No. 535 and No. 538 OGN 60 91 906 906 906 906 906 906 906 906 906
1 glass door
2 adjustable glass shelves
Wall unit with glass doors OGN 90 91 1560 1560 1560 1560 1560 1560 1560 1560 1560
OGN 100 91 1605 1605 1605 1605 1605 1605 1605 1605 1605
in neutral glass front No. 535 and No. 538
2 glass doors
2 adjustable glass shelves
Wall unit with folding door OF 60 91 550 661 733 804 878 974 1040 1119 1434
1 folding door
2 adjustable shelves
Wall unit with roller shutter ORO 60 91 2 1316 1316 1316 1316 1316 1316 1316 1316 1316
2 adjustable shelves
Roller shutter finish in:
stainless steel effect no. 199
Wall unit with slats and electrically OGRO 60 91 S 4134 4134 4134 4134 4134 4134 4134 4134 4134
assisted opening OGRO 90 91 S 4383 4383 4383 4383 4383 4383 4383 4383 4383
Carcase incl. slat 371 mm deep
with touch sensor
with 1800 mm connecting cable and
Euro plug
2 adjustable glass shelves
Finish of glass slats:
satin-finished No. 506
black no. 519
white no. 518
Finish of ceramic slats:
concretto No. 558
consigo No. 512
convinta No. 550
oxide nero No. 557
3.09
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Corner wall unit OED 60 91 738 815 902 991 1095 1157 1210 1272 1418
1 hinged door
2 adjustable shelves
Corner wall unit OE 60 91 786 900 974 1040 1117 1217 1277 1358 1665
OE 65 91 814 927 998 1066 1140 1240 1305 1383 1687
2 doors with 155° opening angle OEE 80 91 1026 1143 1221 1282 1357 1485 1544 1613 2075
2 adjustable shelves
without handle drilling OEE 90 91 1077 1190 1265 1348 1423 1550 1626 1706 2303
Corner wall unit OE 80 91 573 632 670 702 738 803 832 867 1095
with 40 cm door
1 hinged door OE 90 91 593 649 686 728 765 829 867 907 1203
2 adjustable shelves with 50 cm door
Corner inf. panel OEBE to be ordered
separately
Corner infill panel for wall units OEBE 40 91 241 249 288 340 357 397 430 512 528
for corner wall unit
fixed size corner infill mitred
one side closed
for planning dimensions 400 x 400 mm
Corner infill panel for wall units OEBE 40 91 V 265 332 373 410 451 509 543 577 592
for corner wall unit
variable corner infill panel mitred
one side closed
Dimensions: 400 - 530 mm per side piece
3.10
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Infill panel for wall units OBF 15 91 199 208 219 227 238 265 276 287 354
Finish in door material
fitted between wall and carcase
In ALNOART, ALNOCERA,
ALNOSATINA and ALNOVETRINA
door width 75 mm,
adjustment range in
carcase finish 77 - 150 mm.
Other front widths (at least 50 mm)
available with MPS 1 (apart from ALNO-
ART) on request.
Corner infill panel for wall units OEBF 20 91 V 403 414 422 430 441 487 497 508 640
Finish in door material
For variable planning dimensions
for 90° corner solution
Min. dimension 50 mm per side.
max. 180 mm on carcase front edge per
leg
Corner infill panel for wall units OEBF 135 91 V 422 430 441 451 458 508 514 527 657
Finish in door material
for 135° corner solution
Min. dimension 21 mm each side.
max. 180 mm on carcase front edge per
leg
Side cladding RBS 91 3 1 528 550 569 591 816 - 953 970 1031
for mounting on the carcase side
50 mm wide
Finish in door material
for carcase depth 350 mm
3.11
high-gloss lacquer
Item
carcase height 910 mm
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
carcase depth 370 mm
width mm
Laminate
universal
veneer/
hinge
finish
Wall shelf unit 150 OR 15 91 281 1427 399 479 873 1160 - -
300 OR 30 91 293 1625 415 498 999 1454 - -
2 adjustable shelves 450 OR 45 91 310 1815 440 528 1116 1745 - -
For colours and versions, 500 OR 50 91 313 1877 443 532 1156 1820 - -
refer to colour matrix carcase 600 OR 60 91 322 2019 457 548 1242 1937 - -
variable in width OR 00 91 V 465 2249 600 720 1384 2101 - -
from 100 to 600 mm
Wall shelf unit variable in width ORO 00 91 V 425 2020 557 668 1028 1786 - -
from 100 to 600 mm
without shelves
Wall shelf unit 150 ORF 15 91 318 1699 448 538 1058 1574 - -
for bottles or scoops
5 fixed shelves
Order matching rustic wooden container
SCH 11 11 1 separately
Angled open end shelf 300 ORA 30 91 L/R 360 1217 492 590 748 1220 - -
2 fixed shelves
Angled open end shelf 300 ORE 30 91 L/R 316 1168 419 503 640 1105 - -
2 fixed shelves
Infill panel for wall units 150 OBK 15 91 84 343 103 - 177 277 - -
Finish in carcase material
flush with carcase
fitted between wall and carcase
3.12
A78 A72
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit O 30 78 308 354 393 413 434 494 512 573 712
O 40 78 325 371 409 429 452 512 529 592 804
1 hinged door O 45 78 333 378 415 436 460 519 547 606 849
2 adjustable shelves
O 50 78 336 381 416 437 462 524 553 607 883
O 55 78 349 394 431 459 483 542 571 632 939
O 60 78 356 399 436 461 489 543 578 631 973
Wall unit O 80 78 513 605 681 721 766 885 922 1046 1476
O 90 78 528 620 693 735 784 902 957 1074 1568
2 hinged doors O 100 78 547 641 711 754 805 930 988 1099 1666
2 adjustable shelves
Wall unit O2T 80 78 525 617 694 734 779 899 934 1059 1487
O2T 90 78 542 633 706 749 798 915 970 1087 1580
2 doors with identical door handing right
or left
2 adjustable shelves
Wall unit with draining rack OT 60 78 765 811 846 873 902 957 991 1044 1371
1 door with 155° hinges
1 draining rack
2 wire mesh shelves
1 removable drip tray
Wall unit with draining rack OT 90 78 1022 1109 1183 1225 1274 1390 1443 1561 2031
2 doors with 155° opening angle
1 draining rack
2 wire mesh shelves
1 removable drip tray
Wall unit for spices OS 30 78 439 485 523 545 564 624 643 704 880
OS 45 78 458 504 540 561 585 645 672 730 1019
1 door with spice rack OS 50 78 467 514 550 571 597 659 689 744 1071
1 adjustable shelf
1 fixed shelf OS 60 78 489 532 570 597 624 679 716 769 1170
Wall unit with glass door OG 45 78 590 635 672 693 717 776 804 863 1093
OG 50 78 593 639 673 694 719 781 810 864 1128
1 glass door OG 60 78 613 656 693 718 764 800 835 888 1217
2 adjustable glass shelves
For glass choices refer to
section Glass types
3.13
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit with glass doors OG 90 78 1018 1110 1182 1225 1274 1391 1446 1564 2033
OG 100 78 1036 1130 1201 1243 1294 1420 1478 1588 2131
2 glass doors
2 adjustable glass shelves
For glass choices refer to
section Glass types
Wall unit with segment door OGS 45 78 363 492 553 603 653 - - 932 986
OGS 50 78 369 502 569 620 668 - - 957 1014
1 segment hinged door OGS 60 78 387 529 605 653 718 - - 1014 1063
2 adjustable glass shelves
For glass choices refer to
section Glass types
Wall unit with segment doors OGS 90 78 634 894 1016 1115 1216 - - 1774 1888
OGS 100 78 649 914 1050 1151 1247 - - 1824 1941
2 segment hinged doors
2 adjustable glass shelves
For glass choices refer to
section Glass types
Wall unit with glass door OGN 45 78 734 734 734 734 734 734 734 734 734
OGN 50 78 760 760 760 760 760 760 760 760 760
in neutral glass front No. 535 and No. 538 OGN 60 78 810 810 810 810 810 810 810 810 810
1 glass door
2 adjustable glass shelves
Wall unit with glass doors OGN 90 78 1377 1377 1377 1377 1377 1377 1377 1377 1377
OGN 100 78 1430 1430 1430 1430 1430 1430 1430 1430 1430
in neutral glass front No. 535 and No. 538
2 glass doors
2 adjustable glass shelves
Wall unit OL 45 78 651 696 726 756 799 907 932 1014 1279
OL 50 78 665 706 735 769 812 923 957 1036 1323
1 upward-folding door with cushioned c. OL 60 78 686 731 763 802 835 951 1023 1062 1420
2 adjustable shelves
OL 80 78 911 934 967 1024 1075 1176 1225 1276 1781
No special construction, no excess depth OL 90 78 961 984 1022 1075 1133 1246 1280 1319 1896
top panels or flyover shelves can be OL 100 78 1010 1033 1067 1127 1188 1319 1337 1384 2015
incorporated with this unit. Minimum
distance between unit top edge and
ceiling: 200 mm.
Servodrive assisted opening is available
for upward lifting door at MPS SERVO HL
surcharge. Order separately for Servodrive
ZLZ 100. We recommend ZG 1 to make
closing easier.
3.14
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
iMove wall unit OLM 60 78 A 1403 1446 1479 1517 1551 1667 1739 1777 2100
OLM 90 78 A 1569 1592 1630 1683 1741 1854 1888 1927 2474
1 upward-folding door with cushioned c.
1 adjustable shelf
1 iMove fitting with lowerable single level
max. load capacity 8 kg
iMove wall unit OLM 60 78 2 A 1558 1602 1634 1673 1706 1822 1894 1933 2247
1 upward-folding door with cushioned c.
1 iMove fitting with lowerable double level
max. load capacity 8 kg
Wall unit OGMLN 45 78 985 1007 1022 1040 1056 1111 1145 1163 1299
OGMLN 50 78 1006 1029 1044 1062 1079 1135 1170 1188 1327
1 combined upward folding door with OGMLN 60 78 1042 1065 1081 1100 1117 1175 1211 1230 1374
cushioned closing:
at top - furniture part, OGMLN 80 78 1372 1383 1399 1428 1454 1503 1529 1554 1761
at bottom - glass part in neutral glass front OGMLN 90 78 1440 1451 1471 1497 1526 1583 1600 1619 1860
No. 535 and No. 538 OGMLN 100 78 1495 1508 1524 1554 1585 1650 1660 1683 1948
2 adjustable glass shelves
Wall unit OGLN 45 78 1322 1322 1322 1322 1322 1322 1322 1322 1322
OGLN 50 78 1350 1350 1350 1350 1350 1350 1350 1350 1350
in neutral glass front No. 535 and No. 538 OGLN 60 78 1398 1398 1398 1398 1398 1398 1398 1398 1398
1 glass upward-folding door with
cushioned closing OGLN 80 78 1832 1832 1832 1832 1832 1832 1832 1832 1832
2 adjustable glass shelves OGLN 90 78 1920 1920 1920 1920 1920 1920 1920 1920 1920
OGLN 100 78 1982 1982 1982 1982 1982 1982 1982 1982 1982
Unit interior in visible side colours carcase
finish.
No special construction, no excess depth
top panels or flyover shelves can be
incorporated with this unit. Minimum
distance between unit top edge and
ceiling: 200 mm. Servodrive assisted
opening is available for upward lifting
door at MPS SERVO HL surcharge. Order
separately for Servodrive ZLZ 100.
3.15
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit OSL 45 78 685 730 760 790 833 941 966 1048 1313
OSL 50 78 699 740 769 803 846 957 991 1070 1357
1 lift-up door with Softlift fitting OSL 60 78 720 765 797 836 869 985 1057 1096 1454
1 adjustable shelf
OSL 80 78 945 968 1001 1058 - - - 1310 1815
Minimum distance between unit top edge OSL 90 78 995 1018 1056 1109 - - - 1353 1930
and ceiling: 180 mm. OSL 100 78 1044 1067 1101 1161 - - - 1418 2049
Custom designs not possible. Do not plan
any elements above this unit! Unit in 800
and 900 mm width not available for range
ALNOSIGN, ALNOPOL, ALNOART pro,
ALNOSHAPE, ALNOBRIT.
Wall unit OGSLN 45 78 1356 1356 1356 1356 1356 1356 1356 1356 1356
OGSLN 50 78 1384 1384 1384 1384 1384 1384 1384 1384 1384
in neutral glass front No. 535 and No. 538 OGSLN 60 78 1405 1405 1405 1405 1405 1405 1405 1405 1405
1 glass lift-up door with Softlift fitting
1 adjustable glass shelf
Wall unit with folding door OF 60 78 530 629 702 744 786 902 938 1062 1343
1 folding door
2 adjustable shelves
Not available in ALNOART.
Wall unit with slats and electrically OGRO 60 78 S 3980 3980 3980 3980 3980 3980 3980 3980 3980
assisted opening OGRO 90 78 S 4214 4214 4214 4214 4214 4214 4214 4214 4214
Carcase incl. slat 371 mm deep
with touch sensor
with 1800 mm connecting cable and
Euro plug
2 adjustable glass shelves
Finish of glass slats:
satin-finished No. 506
black no. 519
white no. 518
Finish of ceramic slats:
concretto No. 558
consigo No. 512
convinta No. 550
oxide nero No. 557
3.16
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit with roller shutter ORO 60 78 2 1231 1231 1231 1231 1231 1231 1231 1231 1231
2 adjustable shelves
Roller shutter finish in:
stainless steel effect no. 199
Corner wall unit OED 60 78 700 758 836 895 978 1064 1101 1182 1404
1 hinged door
2 adjustable shelves
Corner wall unit OE 60 78 771 864 937 977 1024 1143 1176 1306 1567
OE 65 78 796 889 964 1006 1049 1166 1201 1324 1596
2 doors with 155° opening angle OEE 80 78 1016 1108 1184 1225 1270 1389 1425 1548 1953
2 adjustable shelves
without handle drilling OEE 90 78 1064 1158 1228 1271 1322 1447 1506 1616 2157
Corner wall unit OE 80 78 566 612 650 670 693 753 771 832 1032
with 40 cm door
1 hinged door OE 90 78 584 631 666 687 713 776 805 860 1128
2 adjustable shelves with 50 cm door
Corner inf. panel OEBE to be ordered
separately
Corner infill panel for wall units OEBE 40 78 236 244 283 332 350 389 424 506 521
for corner wall unit
fixed size corner infill mitred
one side closed
for planning dimensions 400 x 400 mm
Corner infill panel for wall units OEBE 40 78 V 260 324 365 402 447 501 537 571 583
for corner wall unit
variable corner infill panel mitred
one side closed
Dimensions: 400 - 530 mm per side piece
3.17
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Infill panel for wall units OBF 15 78 191 199 208 219 227 256 265 276 340
Finish in door material
fitted between wall and carcase
In ALNOART, ALNOCERA,
ALNOSATINA and ALNOVETRINA
door width 75 mm,
adjustment range in
carcase finish 77 - 150 mm.
Other front widths (at least 50 mm)
available with MPS 1 (apart from ALNO-
ART) on request.
Corner infill panel for wall units OEBF 20 78 V 383 390 400 409 419 461 470 482 611
Finish in door material
For variable planning dimensions
for 90° corner solution
Min. dimension 50 mm per side.
max. 180 mm on carcase front edge per
leg
Corner infill panel for wall units OEBF 135 78 V 403 414 422 430 441 487 497 508 633
Finish in door material
for 135° corner solution
Min. dimension 21 mm each side.
max. 180 mm on carcase front edge per
leg
Side cladding RBS 78 3 1 514 532 555 573 762 - 890 904 967
for mounting on the carcase side
50 mm wide
Finish in door material
for carcase depth 350 mm
3.18
high-gloss lacquer
Item
carcase height 780 mm
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
carcase depth 370 mm
width mm
Laminate
universal
veneer/
hinge
finish
Wall shelf unit 150 OR 15 78 276 1362 384 461 848 1140 - -
300 OR 30 78 290 1492 405 486 929 1433 - -
2 adjustable shelves 450 OR 45 78 307 1749 424 509 1087 1677 - -
For colours and versions, 500 OR 50 78 310 1798 428 514 1119 1742 - -
refer to colour matrix carcase 600 OR 60 78 318 1937 445 534 1205 1862 - -
variable in width OR 00 78 V 461 2169 585 702 1347 2025 - -
from 100 to 600 mm
Wall shelf unit variable in width ORO 00 78 V 415 1923 533 640 1009 1656 - -
from 100 to 600 mm
without shelves
Wall shelf unit 150 ORF 15 78 300 1534 418 502 955 1502 - -
for bottles or scoops
4 fixed shelves
Order matching rustic wooden container
SCH 11 11 1 separately
Angled open end shelf 300 ORA 30 78 L/R 355 1166 478 574 724 1131 - -
2 fixed shelves
Angled open end shelf 300 ORE 30 78 L/R 313 1122 406 487 631 1062 - -
2 fixed shelves
Infill panel for wall units 150 OBK 15 78 81 321 99 - 167 258 - -
Finish in carcase material
flush with carcase
fitted between wall and carcase
3.19
3.20
A78 A72
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit O 30 65 284 303 336 361 389 443 458 494 647
O 40 65 301 322 355 384 413 464 476 507 724
1 hinged door O 45 65 309 332 362 390 424 476 490 520 762
1 adjustable shelf
O 50 65 312 334 364 394 425 477 498 529 785
O 55 65 323 345 378 406 441 499 520 553 836
O 60 65 326 348 384 413 444 499 521 563 858
Wall unit O 80 65 463 505 571 629 689 788 814 876 1317
O 90 65 480 525 588 643 711 815 842 903 1392
2 hinged doors O 100 65 494 537 600 660 724 828 871 934 1460
1 adjustable shelf
Wall unit O2T 80 65 475 518 584 642 702 802 827 889 1328
O2T 90 65 494 539 600 656 724 828 854 916 1405
2 doors with identical door handing right
or left
1 adjustable shelf
Wall unit with draining rack OT 60 65 684 707 743 772 803 859 882 924 1207
1 door with 155° hinges
1 draining rack
1 storage rack
1 removable drip tray
Wall unit with draining rack OT 90 65 922 962 1024 1081 1151 1251 1278 1342 1805
2 doors with 155° opening angle
1 draining rack
1 storage rack
1 removable drip tray
Wall unit for spices OS 30 65 394 413 446 471 500 553 569 604 791
OS 45 65 411 434 464 492 526 578 592 622 904
1 door with spice rack OS 50 65 418 440 471 502 533 585 607 640 939
1 fixed shelf
OS 60 65 435 456 492 523 554 610 632 675 1022
Wall unit with glass door OG 45 65 561 583 614 642 676 728 742 772 1041
OG 50 65 564 585 616 646 677 729 750 781 1066
1 glass door OG 60 65 578 600 635 665 696 751 773 815 1142
1 adjustable glass shelf
For glass choices refer to
section Glass types
3.21
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit with glass doors OG 90 65 961 1006 1068 1123 1191 1295 1322 1383 1849
OG 100 65 974 1017 1080 1140 1205 1309 1352 1415 1916
2 glass doors
1 adjustable glass shelf
For glass choices refer to
section Glass types
Wall unit with segment door OGS 45 65 332 406 448 522 610 - - 854 905
OGS 50 65 340 417 469 544 630 - - 888 937
1 segment hinged door OGS 60 65 356 444 494 568 672 - - 933 978
1 adjustable glass shelf
For glass choices refer to
section Glass types
Wall unit with glass doors OGN 90 65 1288 1288 1288 1288 1288 1288 1288 1288 1288
OGN 100 65 1331 1331 1331 1331 1331 1331 1331 1331 1331
in neutral glass front No. 535 and No. 538
2 glass doors
1 adjustable glass shelf
Wall unit OL 45 65 621 664 692 724 766 871 893 946 1190
OL 50 65 634 677 707 734 781 895 920 981 1253
1 upward-folding door with cushioned c. OL 60 65 657 695 727 763 802 880 968 1000 1309
1 adjustable shelf
OL 80 65 883 903 926 986 1046 1145 1178 1221 1668
No special construction, no excess depth OL 90 65 931 951 980 1034 1098 1207 1236 1266 1750
top panels or flyover shelves can be OL 100 65 976 996 1023 1081 1152 1264 1283 1324 1831
incorporated with this unit. Minimum
distance between unit top edge and
ceiling: 186 mm.
Servodrive assisted opening is available
for upward lifting door at MPS SER-
VO HL surcharge. Order separately for
Servodrive ZLZ 100. We recommend ZG 1
to make closing easier.
3.22
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
iMove wall unit OLM 60 65 A 1359 1396 1429 1465 1503 1582 1670 1701 1975
OLM 90 65 A 1523 1541 1572 1625 1689 1797 1827 1857 2311
1 upward-folding door with cushioned c.
1 iMove fitting with lowerable single level
max. load capacity 8 kg
Wall unit OGMLN 45 65 954 971 986 1004 1022 1059 1101 1116 1230
OGMLN 50 65 975 992 1007 1026 1044 1082 1124 1140 1257
1 combined upward folding door with OGMLN 60 65 1009 1027 1043 1062 1081 1120 1164 1180 1301
cushioned closing:
at top - furniture part, OGMLN 80 65 1336 1346 1358 1388 1418 1468 1484 1506 1684
at bottom - glass part in neutral glass OGMLN 90 65 1401 1412 1426 1452 1485 1539 1554 1569 1764
front No. 535 and No. 538 OGMLN 100 65 1455 1465 1478 1508 1542 1599 1609 1629 1833
1 adjustable glass shelf
Wall unit OGLN 45 65 1286 1286 1286 1286 1286 1286 1286 1286 1286
OGLN 50 65 1314 1314 1314 1314 1314 1314 1314 1314 1314
in neutral glass front No. 535 and No. 538 OGLN 60 65 1360 1360 1360 1360 1360 1360 1360 1360 1360
1 glass upward-folding door with
cushioned closing OGLN 80 65 1790 1790 1790 1790 1790 1790 1790 1790 1790
1 adjustable glass shelf OGLN 90 65 1872 1872 1872 1872 1872 1872 1872 1872 1872
OGLN 100 65 1934 1934 1934 1934 1934 1934 1934 1934 1934
Unit interior in visible side colours carcase
finish.
No special construction, no excess depth
top panels or flyover shelves can be
incorporated with this unit. Minimum
distance between unit top edge and
ceiling: 186 mm.
Servodrive assisted opening is available
for upward lifting door at MPS SER-
VO HL surcharge. Order separately for
Servodrive ZLZ 100.
Wall unit OSL 45 65 621 642 673 703 735 787 800 831 1058
OSL 50 65 629 648 680 711 743 796 816 849 1093
1 lift-up door with Softlift fitting OSL 60 65 640 659 695 727 759 815 836 879 1165
1 adjustable shelf
OSL 80 65 650 704 740 781 827 890 939 989 1269
Minimum distance between unit top edge OSL 90 65 656 719 755 804 862 925 975 1026 1305
and ceiling: 180 mm. OSL 100 65 1010 1030 1057 1115 - - - 1358 1865
Custom designs not possible. Do not plan
any elements above this unit! Unit in 800
and 900 mm width not available for range
ALNOSIGN, ALNOPOL, ALNOART pro,
ALNOSHAPE, ALNOBRIT.
3.23
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit OGSLN 45 65 829 829 829 829 829 829 829 829 829
OGSLN 50 65 843 843 843 843 843 843 843 843 843
in neutral glass front No. 535 and No. 538 OGSLN 60 65 865 865 865 865 865 865 865 865 865
1 glass lift-up door with Softlift fitting
1 adjustable glass shelf OGSLN 80 65 942 942 942 942 942 942 942 942 942
OGSLN 90 65 961 961 961 961 961 961 961 961 961
Unit interior in visible side colours carcase
finish.
Minimum distance between unit top edge
and ceiling: 180 mm.
Custom designs not possible. Do not plan
any elements above this unit!
Servodrive assisted opening is available
for upward lifting door at MPS SER-
VO HL surcharge. Order separately for
Servodrive ZLZ 100.
Wall unit with folding door OF 60 65 499 542 610 655 712 819 851 919 1230
1 folding door
1 adjustable shelf
Wall unit with sliding door OST 90 65 1138 1159 1190 1219 1253 1305 1317 1348 1549
OST 100 65 1163 1182 1214 1245 1277 1329 1350 1382 1599
Carcase depth 360 mm incl. OST 120 65 1206 1225 1261 1293 1325 1381 1403 1445 1702
10 mm track system
2 carcases of the same width OST 180 65 1435 1498 1534 1583 1641 1704 1754 1805 2045
1 adjustable glass shelf each
1 sliding door without handle
1 set of rails for on-site installation
Corner wall unit OED 60 65 610 642 705 758 830 907 933 979 1225
1 hinged door
1 adjustable shelf
Corner wall unit OE 60 65 676 720 786 835 891 996 1027 1105 1399
OE 65 65 703 743 809 860 914 1022 1050 1120 1421
2 doors with 155° opening angle OEE 80 65 937 979 1046 1104 1163 1263 1288 1350 1768
1 adjustable shelf
without handle drilling OEE 90 65 981 1024 1088 1148 1212 1317 1359 1423 1923
Corner wall unit OE 80 65 507 528 562 591 620 670 683 714 921
with 40 cm door
1 hinged door OE 90 65 523 545 576 607 639 691 712 744 992
2 adjustable shelves with 50 cm door
Corner inf. panel OEBE to be ordered
separately
3.24
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Corner infill panel for wall units OEBE 40 65 231 238 275 324 346 380 418 498 515
for corner wall unit
fixed size corner infill mitred
one side closed
for planning dimensions 400 x 400 mm
Corner infill panel for wall units OEBE 40 65 V 250 320 360 396 438 496 528 565 577
for corner wall unit
variable corner infill panel mitred
one side closed
Dimensions: 400 - 530 mm per side piece
Wall unit with roller shutter ORO 60 65 2 1156 1156 1156 1156 1156 1156 1156 1156 1156
1 adjustable shelf
Roller shutter finish in:
stainless steel effect no. 199
Wall unit with slats and electrically OGRO 60 65 S 3780 3780 3780 3780 3780 3780 3780 3780 3780
assisted opening OGRO 90 65 S 3978 3978 3978 3978 3978 3978 3978 3978 3978
Carcase incl. slat 371 mm deep
with touch sensor
with 1800 mm connecting cable and
Euro plug
1 adjustable glass shelf
Finish of glass slats:
satin-finished No. 506
black no. 519
white no. 518
Finish of ceramic slats:
concretto No. 558
consigo No. 512
convinta No. 550
oxide nero No. 557
3.25
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Infill panel for wall units OBF 15 65 142 152 159 169 181 204 214 223 307
Finish in door material
fitted between wall and carcase
In ALNOART, ALNOCERA,
ALNOSATINA and ALNOVETRINA
door width 75 mm,
adjustment range in
carcase finish 77 - 150 mm.
Other front widths (at least 50 mm)
available with MPS 1 (apart from ALNO-
ART) on request.
Corner infill panel for wall units OEBF 20 65 V 301 312 321 328 339 376 387 395 564
Finish in door material
For variable planning dimensions
for 90° corner solution
min. dimension 50 mm per side.
max. 180 mm on carcase front edge per
leg
Corner infill panel for wall units OEBF 135 65 V 324 337 343 352 361 401 412 421 590
Finish in door material
for 135° corner solution
Min. dimension 21 mm each side.
max. 180 mm on carcase front edge per
leg
Side cladding RBS 65 3 1 496 514 528 545 709 - 826 840 905
for mounting on the carcase side
50 mm wide
Finish in door material
for carcase depth 350 mm
3.26
high-gloss lacquer
Item
carcase height 650 mm
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
carcase depth 370 mm
width mm
Laminate
universal
veneer/
hinge
finish
Wall shelf unit 150 OR 15 65 263 1262 367 440 770 1004 - -
300 OR 30 65 277 1285 389 467 784 1341 - -
1 adjustable shelf 450 OR 45 65 292 1636 407 488 1004 1459 - -
For colours and versions, 500 OR 50 65 298 1687 413 496 1036 1537 - -
refer to colour matrix carcase 600 OR 60 65 307 1830 424 509 1124 1683 - -
variable in width OR 00 65 V 417 2061 565 678 1268 1825 - -
from 100 to 600 mm
Wall shelf unit variable in width ORO 00 65 V 406 1852 525 630 988 1527 - -
from 100 to 600 mm
without shelves
Wall shelf unit 150 ORF 15 65 290 1345 407 488 837 1361 - -
for bottles or scoops
3 fixed shelves
Order matching rustic wooden container
SCH 11 11 1 separately
Angled open end shelf 300 ORA 30 65 L/R 338 1047 454 545 641 1046 - -
1 fixed shelf
Angled open end shelf 300 ORE 30 65 L/R 281 955 350 420 550 857 - -
1 fixed shelf
Infill panel for wall units 150 OBK 15 65 78 266 93 - 139 215 - -
Finish in carcase material
flush with carcase
fitted between wall and carcase
3.27
3.28
520/390/260 mm
Wall units
A78 A72
A78 A72
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit O 30 52 281 308 315 340 370 420 426 454 603
O 40 52 298 325 342 368 387 454 459 489 669
1 hinged door O 45 52 306 336 354 379 400 467 471 502 697
1 adjustable shelf
O 50 52 309 340 363 386 410 473 479 507 720
O 60 52 322 351 384 408 431 495 506 530 778
Wall unit O 80 52 446 501 536 587 624 759 769 827 1194
O 90 52 463 522 559 610 650 784 793 855 1252
2 hinged doors O 100 52 476 539 588 632 681 809 822 879 1318
1 adjustable shelf
Wall unit OKS 30 52 403 431 438 462 493 543 549 577 720
OKS 40 52 422 449 465 492 510 577 583 612 787
1 flap door with cushioned closing OKS 45 52 432 462 482 505 526 595 598 630 817
No special construction, no building OKS 50 52 441 471 495 517 543 606 613 644 851
under, no excess depth top panels or OKS 60 52 456 488 519 544 567 632 650 668 913
flyover shelves can be incorporated with OKS 80 52 569 600 618 662 - - - 789 1148
this unit. Minimum distance between unit OKS 90 52 590 620 640 688 - - - 802 1204
top edge and ceiling: 160 mm. OKS 100 52 606 638 671 710 - - - 822 1274
Unit in 800 and 900 mm width not
available for range ALNOSIGN, ALNOPOL,
ALNOART pro, ALNOSHAPE, ALNOBRIT.
Wall unit OKS 30 52 1 439 466 473 498 529 579 584 611 753
OKS 40 52 1 456 484 501 528 545 613 618 648 820
1 flap door with Tip-On OKS 45 52 1 468 498 516 541 562 629 633 664 850
No special construction, no building OKS 50 52 1 476 506 531 552 577 641 648 680 883
under, no excess depth top panels or OKS 60 52 1 492 524 554 578 603 667 685 704 946
flyover shelves can be incorporated with OKS 80 52 1 605 634 654 697 - - - 824 1180
this unit. Minimum distance between unit OKS 90 52 1 624 656 676 723 - - - 837 1236
top edge and ceiling: 160 mm. OKS 100 52 1 641 674 705 746 - - - 856 1308
Unit in 800 and 900 mm width not
available for range ALNOSIGN, ALNOPOL,
ALNOART pro, ALNOSHAPE, ALNOBRIT.
Wall unit OL 45 52 591 631 657 691 735 835 849 878 1100
OL 50 52 603 646 676 702 749 866 880 923 1185
1 upward-folding door with cushioned c. OL 60 52 626 659 689 723 765 882 915 933 1196
1 adjustable shelf
OL 80 52 852 869 883 944 1012 1112 1127 1165 1552
No special construction, no building under, OL 90 52 902 917 933 991 1060 1160 1189 1213 1599
no excess depth top panels or flyover OL 100 52 944 963 979 1035 1112 1212 1231 1263 1647
shelves can be incorporated with this unit.
Minimum distance between unit top edge
and ceiling: 150 mm.
Servodrive assisted opening is available
for upward lifting door at MPS SERVO HL
surcharge. Order separately for Servodrive
ZLZ 100. We recommend ZG 1 to make
closing easier.
3.29
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit OSL 45 52 587 616 635 660 682 749 753 782 965
OSL 50 52 595 625 651 672 698 763 768 798 999
1 lift-up door with Softlift fitting OSL 60 52 614 641 673 701 724 788 801 825 1062
1 adjustable shelf
OSL 80 52 886 903 917 978 - - - 1199 1586
Minimum distance between unit top edge OSL 90 52 936 951 967 1025 - - - 1247 1633
and ceiling: 180 mm. OSL 100 52 978 997 1013 1069 - - - 1297 1681
Custom designs not possible. Do not plan
any elements above this unit! Unit in 800
and 900 mm width not available for range
ALNOSIGN, ALNOPOL, ALNOART pro,
ALNOSHAPE, ALNOBRIT.
Wall unit OGLN 60 52 1320 1320 1320 1320 1320 1320 1320 1320 1320
OGLN 80 52 1743 1743 1743 1743 1743 1743 1743 1743 1743
in neutral glass front No. 535 and No. 538 OGLN 90 52 1823 1823 1823 1823 1823 1823 1823 1823 1823
1 glass upward-folding door with
cushioned closing OGLN 100 52 1886 1886 1886 1886 1886 1886 1886 1886 1886
1 adjustable glass shelf
Unit interior in visible side colours carcase
finish.
No special construction, no building under,
no excess depth top panels or flyover
shelves can be incorporated with this unit.
Minimum distance between unit top edge
and ceiling: 150 mm.
Servodrive assisted opening is available
for upward lifting door at MPS SERVO HL
surcharge. Order separately for Servodrive
ZLZ 100.
Wall unit OGMLN 60 52 973 989 1004 1021 1042 1101 1117 1127 1225
OGMLN 80 52 1297 1306 1313 1343 1377 1427 1435 1454 1603
1 combined upward folding door with OGMLN 90 52 1363 1370 1378 1407 1441 1491 1507 1518 1666
cushioned closing:
at top - furniture part, OGMLN 100 52 1415 1424 1432 1461 1498 1548 1559 1574 1719
at bottom - glass part in neutral glass front
No. 535 and No. 538
1 adjustable glass shelf
3.30
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Infill panel for wall units OBF 15 52 134 142 152 159 170 192 203 214 290
Finish in door material
fitted between wall and carcase
In ALNOART, ALNOCERA,
ALNOSATINA and ALNOVETRINA
door width 75 mm,
adjustment range in
carcase finish 77 - 150 mm.
Other front widths (at least 50 mm)
available with MPS 1 (apart from ALNO-
ART) on request.
Side cladding RBS 52 3 1 481 496 514 528 697 - 813 821 842
for mounting on the carcase side
50 mm wide
Finish in door material
for carcase depth 350 mm
3.31
high-gloss lacquer
Item
carcase height 520 mm
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
carcase depth 370 mm
width mm
Laminate
universal
veneer/
hinge
finish
Wall shelf unit 150 OR 15 52 260 1234 363 436 658 964 - -
300 OR 30 52 274 1259 384 461 699 1217 - -
1 adjustable shelf 450 OR 45 52 289 1596 403 484 765 1443 - -
For colours and versions, 500 OR 50 52 295 1647 408 490 776 1518 - -
refer to colour matrix carcase 600 OR 60 52 303 1791 420 504 792 1668 - -
variable in width OR 00 52 V 410 1936 528 634 899 1776 - -
from 100 to 600 mm
Wall shelf unit variable in width ORO 00 52 V 398 1781 516 619 969 1396 - -
from 100 to 600 mm
without shelves
Angled open end shelf 300 ORE 30 52 L/R 277 936 346 415 552 799 - -
1 fixed shelf
Infill panel for wall units 150 OBK 15 52 64 233 77 - 120 189 - -
Finish in carcase material
flush with carcase
fitted between wall and carcase
3.32
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit O 30 39 257 279 294 310 329 381 388 418 521
O 40 39 274 293 309 327 349 403 409 446 571
1 hinged door O 45 39 282 302 318 334 354 409 421 460 597
O 50 39 286 305 321 338 359 413 428 468 611
O 60 39 298 318 336 354 371 427 461 482 659
Wall unit O 80 39 403 442 473 510 552 661 673 747 1005
O 90 39 418 458 493 522 563 673 697 776 1056
2 hinged doors O 100 39 434 472 506 539 583 692 724 805 1103
Wall unit OKS 30 39 379 402 417 432 452 504 511 541 638
OKS 40 39 398 417 432 451 472 526 533 569 689
1 flap door with cushioned closing OKS 45 39 408 428 446 460 480 537 548 588 717
1200 mm width with middle post
OKS 50 39 417 436 453 469 492 546 562 602 742
120 cm unit is not available OKS 60 39 432 453 471 490 507 564 599 620 794
in ALNOBRIT and ALNOPOL! OKS 80 39 526 541 555 585 610 661 684 709 959
No special construction, no building OKS 90 39 545 556 574 600 630 685 704 723 1008
under, no excess depth top panels or
flyover shelves can be incorporated with OKS 100 39 561 571 589 617 649 715 723 748 1059
this unit. Minimum distance between unit OKS 120 39 612 625 646 674 708 776 786 813 1119
top edge and ceiling: 130 mm.
Wall unit OKS 30 39 1 415 437 452 468 488 540 546 575 671
OKS 40 39 1 432 452 468 487 507 562 568 605 722
1 flap door with Tip-On OKS 45 39 1 444 464 480 496 516 571 583 622 750
1200 mm width with middle post
OKS 50 39 1 452 471 489 504 526 581 597 638 774
120 cm unit is not available OKS 60 39 1 468 489 506 524 543 599 634 656 827
in ALNOBRIT and ALNOPOL! OKS 80 39 1 562 575 591 620 645 696 719 744 991
No special construction, no building OKS 90 39 1 579 592 610 635 665 720 738 758 1040
under, no excess depth top panels or
flyover shelves can be incorporated with OKS 100 39 1 596 607 623 653 684 751 758 782 1093
this unit. Minimum distance between unit OKS 120 39 1 647 661 681 710 743 811 822 849 1153
top edge and ceiling: 130 mm.
Wall unit OGKSN 45 39 746 746 746 746 746 746 746 746 746
OGKSN 50 39 762 762 762 762 762 762 762 762 762
in neutral glass front No. 535 and No. 538 OGKSN 60 39 796 796 796 796 796 796 796 796 796
1 glass flap door with cushioned closing
OGKSN 80 39 895 895 895 895 895 895 895 895 895
No special construction, no building un- OGKSN 90 39 914 914 914 914 914 914 914 914 914
der, no excess depth top panels or flyover OGKSN 100 39 936 936 936 936 936 936 936 936 936
shelves can be incorporated with this
unit. Minimum distance between unit top
edge and ceiling: 130 mm. Unit interior in
visible side colours carcase finish.
3.33
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit OSL 45 39 565 588 602 617 639 693 706 747 867
OSL 50 39 575 596 611 628 649 705 721 761 893
1 lift-up door with Softlift fitting OSL 60 39 591 613 629 648 665 723 759 778 945
1200 mm width with middle post
OSL 80 39 686 698 714 743 768 819 844 869 1110
120 cm unit is not available OSL 90 39 701 712 731 758 786 844 860 879 1157
in ALNOBRIT and ALNOPOL! OSL 100 39 724 735 753 782 813 878 887 911 1215
Custom designs not possible. Do not plan OSL 120 39 769 783 805 831 867 932 945 970 1269
any elements above this unit!
Minimum distance between unit top edge
and ceiling: 180 mm.
Servodrive assisted opening is available
for upward lifting door at MPS SERVO HL
surcharge. Order separately for Servodrive
ZLZ 100.
Wall unit OGSLN 45 39 930 930 930 930 930 930 930 930 930
OGSLN 50 39 947 947 947 947 947 947 947 947 947
in neutral glass front No. 535 and No. 538 OGSLN 60 39 980 980 980 980 980 980 980 980 980
1 glass lift-up door with Softlift fitting
OGSLN 80 39 1184 1184 1184 1184 1184 1184 1184 1184 1184
Unit interior in visible side colours carcase OGSLN 90 39 1215 1215 1215 1215 1215 1215 1215 1215 1215
finish. OGSLN 100 39 1234 1234 1234 1234 1234 1234 1234 1234 1234
Custom designs not possible. Do not plan
any elements above this unit!
Minimum distance between unit top edge
and ceiling: 180 mm.
Servodrive assisted opening is available
for upward lifting door at MPS SERVO HL
surcharge. Order separately for Servodrive
ZLZ 100.
Parallel lift-up unit OHL 45 39 565 588 602 617 639 693 706 747 867
OHL 50 39 575 596 611 628 649 705 721 761 893
1 Parallel lift-up door OHL 60 39 591 613 629 648 665 723 759 778 945
1200 mm width with middle post
OHL 80 39 686 698 714 743 768 819 844 869 1110
120 cm unit is not available OHL 90 39 701 712 731 758 786 844 860 879 1157
in ALNOBRIT and ALNOPOL! OHL 100 39 724 735 753 782 813 878 887 911 1215
Custom designs not possible. Do not plan OHL 120 39 769 783 805 831 867 932 945 970 1269
any elements above this unit!
Minimum distance between unit top edge
and ceiling: 330 mm.
Servodrive assisted opening is available
for upward lifting door at MPS SERVO HL
surcharge. Order separately for Servodrive
ZLZ 100.
Parallel lift-up unit OGHSLN 45 39 930 930 930 930 930 930 930 930 930
OGHSLN 50 39 947 947 947 947 947 947 947 947 947
1 Parallel lift-up door OGHSLN 60 39 980 980 980 980 980 980 980 980 980
in neutral glass front No. 535 and No. 538
OGHSLN 80 39 1184 1184 1184 1184 1184 1184 1184 1184 1184
Unit interior in visible side colours carcase OGHSLN 90 39 1215 1215 1215 1215 1215 1215 1215 1215 1215
finish. Custom designs not possible. Do not OGHSLN 100 39 1234 1234 1234 1234 1234 1234 1234 1234 1234
plan any elements above this unit!
Minimum distance between unit top edge
and ceiling: 330 mm.
Servodrive assisted opening is available
for upward lifting door at MPS SERVO HL
surcharge. Order separately for Servodrive
ZLZ 100.
3.34
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit with sliding door OST 90 39 937 960 974 989 1011 1065 1077 1118 1220
OST 100 39 956 976 991 1009 1029 1085 1103 1141 1254
Carcase depth 360 mm incl. OST 120 39 993 1016 1032 1051 1068 1126 1162 1181 1328
10 mm track system
2 carcases of the same width OST 180 39 1110 1121 1140 1167 1195 1253 1270 1288 1546
1 sliding door without handle
1 set of rails for on-site installation
Wall unit with bar flap OBKL 60 39 555 577 603 627 646 695 714 743 909
OBKL 80 39 594 621 648 672 694 754 775 809 999
1 bar hatch with Tip-On OBKL 90 39 600 629 657 681 704 769 794 828 1031
with opening and closing cushioning
function OBKL 100 39 606 638 666 691 714 785 811 849 1063
max. load capacity 10 kg
Wall unit OKS 30 26 367 384 395 414 433 481 486 500 600
OKS 40 26 385 403 414 434 454 504 510 525 629
260 mm high OKS 45 26 395 413 425 445 466 517 523 538 645
1 flap door with cushioned closing
OKS 50 26 404 423 441 453 475 534 542 564 689
No special construction, no building OKS 60 26 421 435 452 468 491 548 563 574 699
under, no excess depth top panels or OKS 80 26 521 529 540 568 602 653 661 678 869
flyover shelves can be incorporated with OKS 90 26 534 544 552 581 614 665 679 691 880
this unit. Minimum distance between unit OKS 100 26 550 560 569 599 632 685 699 712 906
top edge and ceiling: 100 mm.
OKS 120 26 600 611,23 620 653 690 747 763 776 989
Wall unit OKS 30 26 1 442 462 474 493 516 569 576 589 697
OKS 40 26 1 482 504 517 538 563 620 628 643 761
260 mm high OKS 45 26 1 429 449 460 479 501 552 559 572 677
1 flap door with Tip-On
OKS 50 26 1 440 458 475 489 511 569 576 599 722
No special construction, no building OKS 60 26 1 456 470 488 503 525 583 598 610 732
under, no excess depth top panels or OKS 80 26 1 556 565 574 603 638 687 696 713 902
flyover shelves can be incorporated with OKS 90 26 1 569 578 588 616 649 701 714 726 914
this unit. Minimum distance between unit OKS 100 26 1 586 595 606 634 668 722 735 748 941
top edge and ceiling: 100 mm.
OKS 120 26 1 639 649 661 692 729 788 802 816 1027
Wall unit OGKSN 60 26 786 786 786 786 786 786 786 786 786
OGKSN 80 26 885 885 885 885 885 885 885 885 885
in neutral glass front No. 535 and No. 538 OGKSN 90 26 904 904 904 904 904 904 904 904 904
1 glass flap door with cushioned closing
OGKSN 100 26 926 926 926 926 926 926 926 926 926
No special construction, no building un-
der, no excess depth top panels or flyover
shelves can be incorporated with this
unit. Minimum distance between unit top
edge and ceiling: 130 mm. Unit interior in
visible side colours carcase finish.
3.35
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Infill panel for wall units OBF 15 39 113 123 135 141 152 173 184 192 246
Finish in door material
390 mm high
fitted between wall and carcase
In ALNOART, ALNOCERA,
ALNOSATINA and ALNOVETRINA
door width 75 mm,
adjustment range in
carcase finish 77 - 150 mm.
Other front widths (at least 50 mm)
available with MPS 1 (apart from ALNO-
ART) on request.
Corner infill panel for wall units OEBF 20 39 V 256 265 274 285 293 325 338 346 503
Finish in door material
390 mm high
For variable planning dimensions
for 90° corner solution
min. dimension 50 mm per side. max.
180 mm on carcase front edge per leg
Side cladding RBS 39 3 1 463 475 488 499 681 - 794 798 817
for mounting on the carcase side
390 mm high
50 mm wide
Finish in door material
for carcase depth 350 mm
3.36
high-gloss lacquer
Item
carcase height 390 and 260 mm
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
carcase depth 370 mm
width mm
Laminate
universal
veneer/
hinge
finish
Wall shelf unit OR 00 39 V 413 1814 541 649 1025 1593 - -
390 mm high
variable in width
from 100 to 900 mm
Angled open end shelf 300 ORE 30 39 L/R 248 756 302 362 482 627 - -
390 mm high
Wall shelf unit 300 ORU 30 39 227 1116 344 413 529 894 - -
450 ORU 45 39 237 1181 368 442 547 1029 - -
390 mm high 500 ORU 50 39 239 1219 375 450 551 1076 - -
U-shaped, open at top
600 ORU 60 39 244 1263 391 469 560 1166 - -
For colours and versions, 900 ORU 90 39 265 1386 441 529 592 1441 - -
refer to colour matrix carcase
variable in width ORU 00 39 V 372 1531 549 659 699 1547 - -
from 150 to 900 mm
Wall unit metal frame shelf 600 ORSC 60 39 ED 772 1386 835 866 1015 1132 - -
800 ORSC 80 39 ED 812 1471 883 920 1075 1199 - -
Aluminium stainless steel effect 900 ORSC 90 39 ED 840 1550 908 945 1124 1261 - -
390 mm high 1000 ORSC 100 39 ED 857 1590 930 966 1150 1294 - -
250 mm deep 1200 ORSC 120 39 ED 888 1638 964 1001 1188 1336 - -
variable width ORSC 00 39 ED V 888 1638 964 1001 1188 1336 - -
With 2 adjustable shelves top and bottom
from 150 to 1200 mm
16 mm adjustable shelves available in all
modular panel colours
Wall unit metal frame shelf 600 ORSC 60 39 SW 772 1386 835 866 1015 1132 - -
800 ORSC 80 39 SW 812 1471 883 920 1075 1199 - -
same as above, but 900 ORSC 90 39 SW 840 1550 908 945 1124 1261 - -
Aluminium black
1000 ORSC 100 39 SW 857 1590 930 966 1150 1294 - -
1200 ORSC 120 39 SW 888 1638 964 1001 1188 1336 - -
variable width ORSC 00 39 SW V 888 1638 964 1001 1188 1336 - -
from 150 to 1200 mm
metal frame shelf for units aluminium stainless steel-effect ARSC 00 39 ED V 1066 1966 1157 1201 1426 1603 - -
Aluminium black ARSC 00 39 SW V 1066 1966 1157 1201 1426 1603 - -
390 mm high
variable width and depth
Width: 150 - 1200 mm
Depth: 250 - 650 mm
without hanging mounting
With 2 adjustable shelves top and bottom
Wall shelf unit 300 ORU 30 26 217 1050 321 385 515 737 - -
450 ORU 45 26 227 1090 340 408 526 850 - -
260 mm high 500 ORU 50 26 230 1120 347 416 530 886 - -
U-shaped, open at top
600 ORU 60 26 234 1150 360 432 541 962 - -
For colours and versions, 900 ORU 90 26 249 1267 400 480 573 1187 - -
refer to colour matrix carcase
variable in width ORU 00 26 V 355 1413 506 607 680 1293 - -
from 150 to 900 mm
3.37
high-gloss lacquer
Item
carcase height 390 and 260 mm
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
carcase depth 370 mm
width mm
Laminate
universal
veneer/
hinge
finish
Wall shelf unit OR 00 26 V 398 1730 506 607 921 1421 - -
260 mm high
variable in width
from 100 to 900 mm
Wall unit metal frame shelf 600 ORSC 60 26 ED 760 1374 823 854 1003 1121 - -
800 ORSC 80 26 ED 801 1459 872 909 1064 1187 - -
Aluminium stainless steel effect 900 ORSC 90 26 ED 829 1538 897 933 1113 1250 - -
260 mm high 1000 ORSC 100 26 ED 845 1578 919 955 1138 1283 - -
250 mm deep 1200 ORSC 120 26 ED 876 1627 952 988 1176 1325 - -
variable width ORSC 00 26 ED V 876 1627 952 988 1176 1325 - -
With 2 adjustable shelves top and bottom
from 150 to 1200 mm
16 mm adjustable shelves available in all
modular panel colours
Wall unit metal frame shelf 600 ORSC 60 26 SW 760 1374 823 854 1003 1121 - -
800 ORSC 80 26 SW 801 1459 872 909 1064 1187 - -
same as above, but 900 ORSC 90 26 SW 829 1538 897 933 1113 1250 - -
Aluminium black
1000 ORSC 100 26 SW 845 1578 919 955 1138 1283 - -
1200 ORSC 120 26 SW 876 1627 952 988 1176 1325 - -
variable width ORSC 00 26 SW V 876 1627 952 988 1176 1325 - -
from 150 to 1200 mm
metal frame shelf for units aluminium stainless steel-effect ARSC 00 26 ED V 1051 1952 1142 1186 1411 1590 - -
Aluminium black ARSC 00 26 SW V 1051 1952 1142 1186 1411 1590 - -
260 mm high
variable width and depth
Width: 150 - 1200 mm
Depth: 250 - 650 mm
without hanging mounting
With 2 adjustable shelves top and bottom
Infill panel for wall units 150 OBK 15 39 59 221 66 - 114 175 - -
Finish in carcase material
390 mm high
flush with carcase
fitted between wall and carcase
3.38
A78 A72
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit for microwave OMK 50 91 430 467 496 527 564 650 660 695 1033
OMK 60 91 479 514 551 587 621 709 723 755 1128
910 mm high
Niche 334 - 365 mm
1 hinged door
1 adjustable shelf
Wall unit for vapour extractors OD 60 91 542 597 634 681 726 791 828 874 1243
910 mm high
1 hinged door
up to 5 shelves (approx. 100 mm deep)
Unit interior layout depends on the
appliance.
Wall unit for vapour extractors OD 90 91 709 824 903 975 1048 1174 1251 1329 1863
910 mm high
2 hinged doors
up to 5 shelves (approx. 100 mm deep)
Unit interior layout depends on the
appliance.
Wall unit for vapour extractors ODD 90 91 805 920 999 1071 1143 1269 1346 1425 1953
910 mm high
2 hinged doors
1 protruding back panel and up to
5 shelves
for integrated telescopic hood
with 600 mm wide exhaust air shaft and
900 mm wide screen
2 shelf units in wall unit depth 350 mm
to the left and right beside the exhaust
air housing
Unit interior layout depends on the
appliance.
3.39
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit for microwave OMK 50 78 416 441 461 488 521 598 617 664 931
OMK 60 78 431 457 479 507 538 616 655 682 984
780 mm high
niche height 334 - 365 mm
1 flap door
Wall unit for vapour extractors OD 60 78 497 541 577 605 632 687 724 777 1119
780 mm high
1 hinged door
up to 4 shelves (approx. 100 mm deep)
Unit interior layout depends on the
appliance.
Wall unit for vapour extractors OD 90 78 678 769 843 884 933 1051 1107 1224 1710
780 mm high
2 hinged doors
up to 4 shelves (approx. 100 mm deep)
Unit interior layout depends on the
appliance.
Wall unit for vapour extractors ODD 90 78 785 877 950 992 1041 1159 1214 1331 1813
780 mm high
2 hinged doors
1 protruding back panel and up to
4 shelves
for integrated telescopic hood
with 600 mm wide exhaust air shaft and
900 mm wide screen
2 shelf units in wall unit depth 350 mm
to the left and right beside the exhaust
air housing
Unit interior layout depends on the
appliance.
3.40
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit for vapour extractors ODL 90 78 1306 1329 1368 1421 1478 1591 1626 1664 2225
780 mm high
1 upward-folding door with cushioned c.
Compartments with fixed intermediate
shelf on both sides
Unit interior layout depends on the
appliance.
Wall unit for microwave OMK 50 65 383 407 428 451 485 566 576 606 860
OMK 60 65 400 419 441 466 500 579 598 616 870
650 mm high
niche height 334 - 365 mm
1 flap door
Wall unit for vapour extractors OD 60 65 470 492 527 559 590 646 668 711 1005
650 mm high
1 hinged door
up to 3 shelves (approx. 100 mm deep)
Unit interior layout depends on the
appliance.
Wall unit for vapour extractors OD 90 65 626 671 733 788 857 962 987 1049 1531
650 mm high
2 hinged doors
up to 3 shelves (approx. 100 mm deep)
Unit interior layout depends on the
appliance.
3.41
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit for vapour extractors ODD 90 65 729 774 836 891 960 1064 1090 1152 1629
650 mm high
2 hinged doors
1 protruding back panel and up to
3 shelves
for integrated telescopic hood
with 600 mm wide exhaust air shaft and
900 mm wide screen
2 shelf units in wall unit depth 350 mm
to the left and right beside the exhaust
air housing
Unit interior layout depends on the
appliance.
Wall unit for vapour extractors ODSL 90 65 1294 1358 1393 1442 1500 1564 1614 1665 1910
650 mm high
1 lift-up door with Softlift fitting
Compartments with fixed intermediate
shelf on both sides
Unit interior layout depends on the
appliance.
For 60 cm wide appliances with 90 cm
vapour hood.
Not to be planned at the end of a run. If
this is unavoidable a side panel needs to
be ordered separately. Do not plan any
elements above this unit! Minimum dis-
tance between unit top edge and ceiling:
180 mm.
Servodrive assisted opening is available
for upward lifting door at MPS SERVO HL
surcharge. Order separately for Servodrive
ZLZ 100. We recommend ZG 1 to make
closing easier.
Front panel for integrated extractor FDH 60 121 149 184 210 235 302 313 339 609
520 mm high
1 front panel (without carcase)
516 mm high
Wall unit for vapour extractors OD 60 52 392 420 453 478 502 567 577 603 853
520 mm high
1 hinged door
up to 2 shelves (approx. 100 mm deep)
Unit interior layout depends on the
appliance.
3.42
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit for vapour extractors OD 90 52 507 567 603 655 695 829 837 900 1294
520 mm high
2 hinged doors
up to 2 shelves (approx. 100 mm deep)
Unit interior layout depends on the
appliance.
Wall unit for vapour extractors ODL 90 52 1248 1263 1280 1337 1406 1507 1536 1560 1929
520 mm high
1 upward-folding door with cushioned c.
Unit interior layout depends on the
appliance.
Front panel for Airforce extractor hood FDH 60 39 107 131 147 166 185 244 281 301 497
FDH 90 39 134 146 165 193 222 281 298 318 633
1 front panel (without carcase)
386 mm high
3.43
3.44
Dresser units/
Cooker hoods
A78 A72
A78 A72
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Dresser unit AG2S 45 126 1 1063 1211 1284 1385 1528 1674 1760 1853 2207
AG2S 60 126 1 1120 1285 1368 1481 1642 1809 1895 1988 2343
350 mm deep carcase
1260 mm high
to be placed on a 40 mm thick worktop
1 glass door in door finish
2 adjustable glass shelves
2 drawers
1 fixed panel
For glass choices refer to
section Glass types
Dresser unit AGS 45 113 1 900 1040 1110 1196 1325 1451 1533 1620 1864
AGS 60 113 1 947 1104 1183 1279 1424 1568 1649 1736 1975
350 mm deep carcase
1130 mm high
to be placed on a 40 mm thick worktop
1 glass door in door finish
2 adjustable glass shelves
1 drawer
1 fixed panel
For glass choices refer to
section Glass types
The height of 1390 mm is made up from the 1130 mm high dresser unit and a 260 mm high wall unit. 3.45
high-gloss lacquer
Item
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Dresser unit Various sizes 600 ARO 60 152 2 - - - - - - - 1636
Various sizes 900 ARO 90 152 2 - - - - - - - 2077
350 mm deep carcase
with roller shutter 1390 mm high, 600 ARO 60 139 2 - - - - - - - 1549
To be placed on a 40 mm thick worktop. 2 shelves
2 or 1 adjustable shelves. 1390 mm high, 900 ARO 90 139 2 - - - - - - - 2030
1 fixed shelf 2 shelves
1260 mm high, 600 ARO 60 126 2 - - - - - - - 1464
Roller shutter finish in:
stainless steel effect no. 199 2 shelves
1260 mm high, 900 ARO 90 126 2 - - - - - - - 1981
Dresser unit of variable size is available in 2 shelves
heights of 1520 - 1000 mm, e.g. for use 1130 mm high, 600 ARO 60 113 2 - - - - - - - 1363
on worktops of different thickness. 1 shelf
Unit interior in visible side colours carcase 1130 mm high, 900 ARO 90 113 2 - - - - - - - 1919
finish. 1 shelf
ill. shows 1390 mm height Matching accessories:
socket element ZLZ 39
Matching accessories:
socket element ZLZ 39
3.46
high-gloss lacquer
Item
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Dresser unit 1390 mm high, 600 AGRO 60 139 51 - - - - - - - 3141
3 shelves
Carcase incl. aluminium frame 580 mm 1390 mm high, 900 AGRO 90 139 51 - - - - - - - 3305
deep. With roller shutters with glass slats 3 shelves
and neutral strip handle in aluminium.
To be placed on a 40 mm thick worktop. 1260 mm high, 600 AGRO 60 126 51 - - - - - - - 3006
3 or 2 adjustable glass shelv. 3 shelves
1260 mm high, 900 AGRO 90 126 51 - - - - - - - 3171
Finish of glass slats: 3 shelves
satin-finished No. 506 1130 mm high, 600 AGRO 60 113 51 - - - - - - - 2882
black no. 519 2 shelves
white no. 518
1130 mm high, 900 AGRO 90 113 51 - - - - - - - 3046
Unit interior in visible side colours carcase 2 shelves
finish.
Custom designs not possible.
No visible sides!
Matching accessories:
socket element ZLZ 39
Dresser unit with slats and electrically 1390 mm high, 600 AGRO 60 139 1 S - - - - - - - 5759
assisted opening 3 shelves
1390 mm high, 900 AGRO 90 139 1 S - - - - - - - 6096
Carcase incl. slat 371 mm deep 3 shelves
with touch sensor in bottom slat
with 1800 mm connecting cable and 1260 mm high, 600 AGRO 60 126 1 S - - - - - - - 5606
Euro plug 3 shelves
To be placed on a 40 mm thick worktop. 1260 mm high, 900 AGRO 90 126 1 S - - - - - - - 5923
3 shelves
Finish of glass slats: 1130 mm high, 600 AGRO 60 113 1 S - - - - - - - 5391
satin-finished No. 506 2 shelves
black no. 519
white no. 518 1130 mm high, 900 AGRO 90 113 1 S - - - - - - - 5663
2 shelves
Finish of ceramic slats:
concretto No. 558
consigo No. 512
convinta No. 550
oxide nero No. 557
3 adjustable glass shelves
Matching accessories:
socket element ZLZ 39
3.47
high-gloss lacquer
Item
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Dresser unit with slats and electrically 600 AGRO 60 139 51 S - - - - - - - 6005
assisted opening 900 AGRO 90 139 51 S - - - - - - - 6379
600 AGRO 60 126 51 S - - - - - - - 5849
Carcase incl. slat 581 mm deep
with 1800 mm connecting cable and 900 AGRO 90 126 51 S - - - - - - - 6202
Euro plug 600 AGRO 60 113 51 S - - - - - - - 5625
with touch sensor in bottom slat 900 AGRO 90 113 51 S - - - - - - - 5930
To be placed on a 40 mm thick worktop.
Finish of glass slats:
satin-finished No. 506
black no. 519
white no. 518
Finish of ceramic slats:
concretto No. 558
consigo No. 512
convinta No. 550
oxide nero No. 557
3 or 2 adjustable glass shelv.
Matching accessories:
socket element ZLZ 39
3.48
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Infill panel for dresser units ABF 15 139 203 212 221 267 240 269 278 287 363
Finish in door material
fitted between wall and carcase
1390 mm high
In ALNOART, ALNOCERA,
ALNOSATINA and ALNOVETRINA
door width 75 mm,
adjustment range in
carcase finish 77 - 150 mm.
Other front widths (at least 50 mm)
available with MPS 1 (apart from ALNO-
ART) on request.
Infill panel for dresser units ABF 15 126 192 201 209 219 231 255 267 276 346
same as above, but
1260 mm high
Infill panel for dresser units ABF 15 113 184 192 202 209 220 246 259 269 341
same as above, but
1130 mm high
3.49
high-gloss lacquer
Item
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Infill panel for dresser units 1130 mm high 150 ABK 15 113 98 374 119 - 193 306 - -
1260 mm high 150 ABK 15 126 104 401 124 - 207 325 - -
Finish in carcase material 1390 mm high 150 ABK 15 139 106 424 129 - 220 349 - -
flush with carcase
fitted between wall and carcase
3.50
4. Tall units
A78 Tall units 1950 mm
Accessories
ZV.. E ZI 1..
Ventilation grille Magnetic safety lock
(child safety)
Special productions
MPS 5 MPS 6
Change to tall units with several additional functions complete modification of a tall unit
Section 8. Custom construction Section 8. Custom construction
2210 mm high
S.. 221 SB.. 221 SA.. 221 A SIA.. 221 SU 88 221 SU 122 A 221
30-60 cm 30-60 cm 30 cm 30-60 cm
SUB S2A 221 SUMKB 2A 221 SBF 15 221 RBS 221 WS../ WSK.. PWS../ PWSK..
SBK 15 221 Width 16, 25 mm Width 50 mm
Section 5. Modular Section 5. Modular
panels panels
2080 mm high
S.. 208 SB.. 208 SA.. 208 A SIA.. 208 SU 88 208 SU 122 A 208
30-60 cm 30-60 cm 30 cm 30-60 cm
SUB S2A 208 SUMKB 208 SBF 15 208 RBS 208 WS../ WSK.. PWS../ PWSK..
SBK 15 208 Width 16, 25 mm Width 50 mm
Section 5. Modular Section 5. Modular
panels panels
4.01
1950 mm high
S.. 195 SB.. 195 SA.. 195 A SIA.. 195 SU 88 195 SU 122 A 195
30-60 cm 30-60 cm 30-60 cm 30 cm
SUB 2A 195 SUMKB 2A 195 SBF 15 195 RBS 195 WS../ WSK.. PWS../ PWSK..
SBK 15 195 Width 16, 25 mm Width 50 mm
Section 5. Modular Section 5. Modular
panels panels
1560 mm high
S.. 156 SB.. 156 SA.. 156 A SEKL.. 156 A SU 88 2A 156 SU 102 A 156
30-60 cm 30-60 cm 30 cm 110-125 cm
SUMBA 156 SBF 15 156 RBS 156 WS../ WSK.. PWS../ PWSK.. P..
SBK 15 156 Width 16, 25 mm Width 50 mm Section
Section 5. Modular Section 5. Modular 5. Top panels
panels panels
4.02
1300 mm high
1296
S.. 130 SB.. 130 SA.. 130 A SEKL.. 130 A SU 88 A 130 SUG..130
30-60 cm 30-60 cm 30 cm 110-125 cm
4.03
2210 mm high
S.. 221 M SB.. 221 M SA.. 221 MAK SIA.. 221 M SU 88 221 M SU 122 A 221 M
30-60 cm 30-60 cm 30 cm 30-60 cm
SUB S2A 221 1M SUMKB 2A 221 M SBF 15 221 M RBS 221 M WS../ WSK.. PWS../ PWSK..
SBK 15 221 M Width 16, 25 mm Width 50 mm
Section 5. Modular Section 5. Modular
panels panels
2080 mm high
S.. 208 M SB.. 208 M SA.. 208 MAK SIA.. 208 M SU 88 S2A 208 M SU 122 A 208 M
30-60 cm 30-60 cm 30 cm 30-60 cm
SUB S2A 208 1M SUMKB 2A 208 M SBF 15 208 M RBS 208 M WS../ WSK.. PWS../ PWSK..
SBK 15 208 M Width 16, 25 mm Width 50 mm
Section 5. Modular Section 5. Modular
panels panels
4.04
1950 mm high
1231
711
S.. 195 M SB.. 195 M SA.. 195 MAK SIA.. 195 M SU 88 195 M SU 122 A 195 M
30-60 cm 30-60 cm 30 cm 30-60 cm
SUB 2A 195 M SUMKB 2A 195 M SBF 15 195 M RBS 195 WS../ WSK.. PWS../ PWSK..
SBK 15 195 M Width 16, 25 mm Width 50 mm
Section 5. Modular Section 5. Modular
panels panels
1560 mm high
S.. 156 M SB.. 156 M SA.. 156 MAK SEKL.. MA SU 88 2A 156 M SU 102 A 156 M
30-60 cm 30-60 cm 30 cm 110-125 cm
SUMB SA 156 M SBF 15 156 M RBS 156 WS../ WSK.. PWS../ PWSK.. P..
SBK 15 156 M Width 16, 25 mm Width 50 mm Section
Section 5. Modular Section 5. Modular 5. Top panels
panels panels
4.05
1300 mm high
1296
S.. 130 SB.. 130 SA.. 130 A SEKL.. 130 A SU 88 A 130 M SUG..130 M
30-60 cm 30-60 cm 30 cm 110-125 cm
4.06
Item
width mm
universal
hinge
ELITE interior equipment per drawer 138
per deep drawer 163
Filigree closed drawer and deep drawer system with metal sides
and bottom in anthracite grey. Dynamic load-bearing capacity and per drawer 247
synchronized air glide system.
per deep drawer 272
This interior finish can be ordered at a surcharge via version type 65 in
the kitchen planning system.
Not for base units with drawer line, sink unit with waste separation
system XXL/XXXL. See item description for further exceptions.
ELITE interior equipment with Tip-On
This interior finish can be ordered at a surcharge via version type 66 in
the kitchen planning system.
Not for internal drawers or interior deep drawers. See item description
for further exceptions.
Not for internal drawers or interior deep drawers. See item description
for further exceptions.
Mat anthracite
Mats are easily ordered via the head type in the kitchen planning
system.
Mats are automatically enclosed for all drawers, deep drawers, internal
drawers and interior deep drawers, as well as for all carousel shelves
in corner base units.
4.07
4.08
A78
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit S 30 221 929 1062 1141 1229 1317 1472 1552 1707 2038
S 45 221 987 1122 1201 1302 1407 1562 1663 1811 2335
1 flap door S 50 221 1007 1143 1231 1326 1430 1622 1701 1853 2459
2 hinged doors
2 fixed shelves S 60 221 1062 1186 1277 1378 1491 1685 1803 1943 2736
5 adjustable shelves
410 S 30 221 4 929 1062 1141 1229 1317 1472 1552 1707 2038
410 S 45 221 4 987 1122 1201 1302 1407 1562 1663 1811 2335
410 S 50 221 4 1007 1143 1231 1326 1430 1622 1701 1853 2459
410 S 60 221 4 1062 1186 1277 1378 1491 1685 1803 1943 2736
Tall unit D S 30 221 D 929 1062 1141 1229 1961 - - 1707 2038
D S 45 221 D 987 1122 1201 1302 2051 - - 1811 2335
same as above, but S 50 221 D 1007 1143 1231 1326 2172 - - 1853 2459
1 full-height hinged door D
D S 60 221 D 1062 1186 1277 1378 2282 - - 1943 2736
Only available in ALNOPLAN, ALNODUR,
0 ALNOFINE, ALNOSUND, ALNOSIGN, ALNO-
GRAND, ALNOCLASS, ALNOSTRUCT.
Not available in:
Fronts with horizontal graining in ALNO-
PLAN.
Tall unit for provisions S2A 60 221 1326 1450 1541 1642 1755 1949 2067 2207 3000
1 flap door
1 hinged door
2 fixed shelves
3 adjustable shelves
2 deep drawers
Tall unit for broom SB 30 221 1069 1203 1281 1369 1457 1612 1693 1847 2172
SB 45 221 1126 1262 1339 1441 1545 1700 1802 1950 2467
1 flap door SB 50 221 1146 1283 1370 1466 1570 1761 1841 1993 2591
1 door (dowelled)
2 fixed shelves SB 60 221 1201 1325 1416 1516 1630 1823 1941 2082 2867
1 hook for brooms
1 holder for vacuum cleaner hose
1 hook rail
2 runners for adjustable wire baskets
3 wire baskets
Tall unit for broom D SB 30 221 D 1069 1203 1281 1369 2101 - - 1847 2172
D SB 45 221 D 1126 1262 1339 1441 2263 - - 1950 2467
same as above, but SB 50 221 D 1146 1283 1370 1466 2311 - - 1993 2591
1 full-height hinged door D
D SB 60 221 D 1201 1325 1416 1516 2420 - - 2082 2867
Only available in ALNOPLAN, ALNODUR,
ALNOFINE, ALNOSUND, ALNOSIGN, ALNO-
0
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 4.09
Tall units
Price group
carcase height 2210 mm
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for provisions SA 30 221 AK 1885 2020 2098 2186 2274 2429 2507 2661 2946
1 pull-out larder unit dowelled
with cushioned opening and closure
5 baskets
Wire basket finish anthracite grey
Matching accessories:
Electrically assisted opening ZAZ 18
Order Orgaset ZI 3011 AG and ZI 3012 AG
Tall unit for provisions D SA 30 221 DAK 1795 1930 2008 2096 2828 - - 2571 2860
same as above, but
1 pull-out larder unit
Tall unit for provisions SA 30 221 A 2085 2220 2298 2386 2475 2629 2708 2862 3135
SA 45 221 A 2166 2302 2381 2480 2585 2740 2840 2990 3457
1 pull-out larder unit dowelled
with cushioned opening and closure
5 baskets
Arena shelf finish anthracite grey
Matching accessories:
Electrically assisted opening ZAZ 18
Order Orgaset ZI 3011 AG and ZI 3012 AG
Tall unit for provisions D SA 30 221 DA 1995 2130 2208 2296 3029 - - 2772 3051
D SA 45 221 DA 2077 2212 2291 2390 3213 - - 2900 3371
same as above, but
1 pull-out larder unit
4.10 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Tall units
Price group
carcase height 2210 mm
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for provisions SIA 30 221 1847 1981 2059 2147 2235 2390 2471 2625 2911
SIA 45 221 1898 2033 2111 2212 2317 2472 2573 2721 3201
1 flap door SIA 50 221 1921 2056 2144 2239 2344 2535 2615 2767 3326
2 hinged doors
2 fixed shelves SIA 60 221 1974 2099 2190 2290 2404 2597 2715 2856 3603
1 shelf
5 interior deep drawers
Tall unit for provisions D SIA 30 221 D 1847 1981 2059 2147 2879 - - 2625 2911
D SIA 45 221 D 1898 2033 2111 2212 3036 - - 2721 3201
same as above, but SIA 50 221 D 1921 2056 2144 2239 3086 - - 2767 3326
1 full-height hinged door D
D SIA 60 221 D 1974 2099 2190 2290 3195 - - 2856 3603
Only available in ALNOPLAN, ALNODUR,
ALNOFINE, ALNOSUND, ALNOSIGN, ALNO-
GRAND, ALNOCLASS, ALNOSTRUCT.
0
Tall unit for provisions ST 60 221 A 2019 2143 2234 2335 2448 2642 2760 2900 3693
1 flap door
1 door (dowelled)
1 fixed shelf
1 swing-out mechanism with
4 fixed baskets
1 Orgaset
5 adjustable shelves shortened in depth
Tall unit for provisions ST 60 221 DA 2019 2143 2234 2335 2448 - - 2900 3693
same as above, but
1 full-height hinged door
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 4.11
Tall units, Corner tall unit, Storage unit
Price group
carcase height 2210 mm
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for provisions SM 60 221 A 3148 3272 3363 3464 3577 3771 3889 4029 4718
1 flap door
1 door (dowelled)
1 fixed shelf
1 swing-out mechanism with
4 fixed baskets
1 Orgaset
1 swing-out mechanism with
5 adjustable baskets
Tall unit for provisions D SM 60 221 DA 3148 3272 3363 3464 4368 - - 4029 4718
same as above, but
1 full-height hinged door
Corner tall unit SE 105 221 2867 3042 3230 3449 3717 3971 4140 4335 5210
1 door (dowelled)
1 fixed shelf
6 adjustable shelves
base cover in stainless steel
Corner storage unit SE 120 221 2510 2638 2727 2832 2945 3139 3258 3399 4123
2 side panels 590 mm deep for tall units
+ plinth height
available in all panel colours
Carcase interior colour white or anthracite
grey
1 top shelf 25 mm thick
4 shelves 25 mm thick
1 sliding door with sliding door fitting and
plinth element
Handle vertically over the complete front
height as opening assistance in stainless
steel- effect or aluminium black
Planning dimension 1200 x 600 mm
4.12 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Tall units for appliances
Price group
carcase height 2210 mm
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 88 221 960 1086 1193 1291 1386 1570 1653 1777 2751
Niche height 878 mm
1 hinged door
1 adjustable shelf
1 hinged appliance door
1 hinged door
2 adjustable shelves
Tall unit for built-in appliance SU 88 ISIA 221 1612 1738 1845 1943 2038 2222 2305 2429 3403
Niche height 878 mm
1 hinged door
1 adjustable shelf
1 hinged appliance door
1 hinged door
1 internal drawer
2 interior deep drawers
Tall unit for built-in appliance SU 88 S2A 221 1396 1527 1629 1753 1876 2143 2246 2351 3405
Niche height 878 mm
1 hinged door
1 adjustable shelf
1 hinged appliance door
1 drawer
2 deep drawers
Tall unit for built-in appliance SU 88 2A 221 1223 1350 1451 1562 1663 1905 2025 2134 3120
Niche height 878 mm
1 hinged door
1 adjustable shelf
1 hinged appliance door
2 deep drawers
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill: 4.13
200 cm².
Tall units for appliances
Price group
carcase height 2210 mm
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 102 221 962 1081 1187 1296 1408 1598 1691 1769 2697
Niche height 1025 mm
1 hinged door
1 adjustable shelf
1 hinged appliance door
1 hinged door
1 adjustable shelf
Tall unit for built-in appliance SU 102 2A 221 1234 1370 1472 1586 1703 1954 2077 2140 3081
Niche height 1025 mm
1 hinged door
1 adjustable shelf
1 hinged appliance door
2 deep drawers
Servodrive assisted opening is available
for appliance hinged door at
MPS SERVO KS surcharge.
Tall unit for built-in appliance SU 122 A 221 1038 1158 1245 1349 1484 1698 1880 1957 2877
Niche height 1225 mm
1 hinged door
1 adjustable shelf
1 hinged appliance door
1 deep drawer
Servodrive assisted opening is available
for appliance hinged door at
MPS SERVO KS surcharge.
Tall unit for built-in appliance SU 122 2TA 221 1115 1240 1344 1452 1556 1797 1915 2026 3016
Niche height 1225 mm
1 hinged door
1 adjustable shelf
2 hinged appliance doors
1 deep drawer
4.14 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill:
200 cm².
Tall units for appliances
Price group
carcase height 2210 mm
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 140 221 968 1076 1185 1269 1355 1520 1615 1762 2754
Niche height 1400 mm
1 hinged door
2 adjustable shelves
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 145 2T 221 933 1042 1133 1239 1353 1545 1670 1809 2608
niche height 1450 mm
1 hinged door
1 adjustable shelf
2 hinged appliance doors
Tall unit for built-in appliance SU 145 2T 221 4 930 1055 1157 1266 1377 1587 1676 1802 2627
niche height 1450 mm
1 hinged door
1 adjustable shelf
2 hinged appliance doors
Tall unit for built-in appliance SU 152 2T 221 933 1030 1139 1246 1353 1529 1610 1740 2714
niche height 1446 - 1525 mm
1 hinged door
1 adjustable shelf
2 hinged appliance doors
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill: 4.15
200 cm².
Tall units for appliances
Price group
carcase height 2210 mm
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 152 221 941 1050 1159 1242 1328 1494 1588 1736 2729
niche height 1528 mm
1 hinged door
1 adjustable shelf
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 158 2T 221 927 1044 1134 1236 1373 1586 1767 1845 2770
Niche height 1580 mm
1 hinged door
1 adjustable shelf
2 hinged appliance doors
Tall unit for built-in appliance SU 159 221 947 1074 1180 1278 1374 1558 1640 1764 2740
niche height 1450 - 1590 mm
1 hinged door
1 adjustable shelf
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 159 2T 221 933 1060 1167 1265 1360 1543 1627 1750 2725
SU 145 2T 221 3 933 1060 1167 1265 1360 1543 1627 1750 2725
same as above, but
2 hinged appliance doors
Tall unit for built-in appliance SU 159 2T 221 1 935 1055 1162 1270 1381 1572 1665 1742 2671
niche height 1590 mm
1 hinged door
1 adjustable shelf
2 hinged appliance doors
4.16 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill:
200 cm².
Tall units for appliances
Price group
carcase height 2210 mm
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 178 221 1 923 1056 1149 1245 1348 1530 1661 1744 2651
niche height 1585 - 1788 mm
1 hinged door
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 178 2T 221 911 1044 1137 1234 1336 1518 1649 1732 2640
same as above, but
Niche height 1580 mm
2 hinged appliance doors
Tall unit for built-in appliance SU 178 221 3 922 1055 1148 1245 1347 1529 1660 1743 2651
Niche height 1780 mm
1 flap door
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 178 2T 221 1 981 1106 1196 1296 1411 1603 1722 1863 2659
same as above, but
2 hinged appliance doors
Tall unit for built-in appliance SU 178 2T 221 2 901 1030 1122 1233 1339 1525 1633 1745 2679
Niche height 1780 mm
1 hinged door
2 hinged appliance doors
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill: 4.17
200 cm².
Tall units for appliances
Price group
carcase height 2210 mm
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 178 221 837 945 1035 1143 1258 1450 1573 1714 2517
niche height 1788 mm
1 hinged door
1 hinged appliance door
1 deep drawer for appliances
Tall unit for built-in appliance SU 178 2T 221 3 906 1015 1106 1212 1325 1518 1642 1782 2583
niche height 1788 mm
1 hinged door
2 hinged appliance doors
Servodrive assisted opening is available
for appliance hinged door at
MPS SERVO KS surcharge.
Tall unit for built-in appliance SU 178 221 2 917 1026 1117 1224 1336 1530 1654 1793 2594
same as above, but
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 178 2T 221 4 972 1076 1168 1273 1421 1627 1799 1886 2806
niche height 1788 mm
1 flap door
2 hinged appliance doors
Tall unit for appliances SU 88 72 221 947 1074 1180 1278 1374 1558 1640 1764 2740
Niche height
upper 878 mm
lower 716 mm
1 hinged door
1 adjustable shelf
2 hinged appliance doors
4.18 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill:
200 cm².
Tall units for appliances
Price group
carcase height 2210 mm
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SU 102 72 221 923 1056 1149 1245 1348 1530 1661 1744 2651
Niche height
upper 1025 mm
lower 716 mm
1 hinged door
2 hinged appliance doors
Tall unit for appliances SU 88 88 221 912 1042 1134 1244 1352 1536 1645 1756 2690
Niche height
upper 878 mm
lower 878 mm
1 hinged door
2 hinged appliance doors
Servodrive assisted opening is available
for appliance hinged door at
MPS SERVO KS surcharge.
Tall unit for appliances SUB 88 221 878 960 1036 1123 1210 1353 1415 1509 2298
Niche height D SUB 88 221 D 878 960 1036 1123 1210 - - 1509 2298
upper 585 - 595 mm
lower 878 mm
1 hinged door
1 adjustable shelf
1 open niche
1 hinged appliance door
Tall unit for appliances SUB 102 221 878 960 1036 1123 1210 1353 1415 1509 2298
Niche height D SUB 102 221 D 878 960 1036 1123 1210 - - 1509 2298
upper 585 - 595 mm
lower 1025 mm
1 hinged door
1 adjustable shelf
1 open niche
1 hinged appliance door
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill: 4.19
200 cm².
Tall units for appliances
Price group
carcase height 2210 mm
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SUM 102 221 4 786 890 968 1051 1134 1275 1352 1456 2299
Niche height D SUM 102 221 4 D 786 890 968 1051 1134 - - 1456 2299
at top 450 mm
at bottom 1025 mm
1 hinged door
1 adjustable shelf
1 open niche
1 hinged appliance door
Tall unit for built-in appliance SUM 221 929 1032 1111 1193 1276 1418 1494 1598 2435
niche height 380 - 450 mm D SUM 221 D 929 1032 1111 1193 1276 - - 1598 2435
1 hinged door
2 adjustable shelves
1 open niche
1 hinged door
2 adjustable shelves
Tall unit for built-in appliance SUB 221 2 914 1006 1084 1146 1213 1345 1420 1532 2340
niche height 585 - 595 mm D SUB 221 2 D 914 1006 1084 1146 1213 - - 1532 2340
1 hinged door
2 adjustable shelves
1 open niche
1 hinged door
2 adjustable shelves
Tall unit for built-in appliance SUB ISIA 221 2 1566 1658 1736 1798 1865 1997 2072 2184 2992
niche height 585 - 595 mm D SUB ISIA 221 2 D 1566 1658 1736 1798 1865 - - 2184 2992
1 hinged door
2 adjustable shelves
1 open niche
1 hinged door
1 internal drawer
2 interior deep drawers
4.20 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill:
200 cm².
Tall units for appliances
Price group
carcase height 2210 mm
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SUB 2A 221 1 1180 1273 1346 1420 1492 1684 1795 1892 2712
niche height 585 - 595 mm D SUB 2A 221 1 D 1180 1273 1346 1420 1492 - - 1892 2712
1 hinged door
2 adjustable shelves
1 open niche
2 deep drawers
Tall unit for built-in appliance SUB S2A 221 1371 1467 1540 1629 1723 1938 2033 2126 3013
niche height 585 - 595 mm D SUB S2A 221 D 1371 1467 1540 1629 1723 - - 2126 3013
1 hinged door
2 adjustable shelves
1 open niche
1 drawer
2 deep drawers
Tall unit for built-in appliance SUB 221 917 999 1076 1163 1248 1391 1454 1547 2336
niche height 585 - 595 mm D SUB 221 D 881 962 1039 1125 1215 - - 1512 2301
1 hinged door
2 adjustable shelves
1 open niche
1 hinged door
1 adjustable shelf
Tall unit for built-in appliance SUB 2A 221 1181 1279 1352 1443 1537 1739 1831 1910 2712
niche height 585 - 595 mm D SUB 2A 221 D 1181 1279 1352 1443 1537 - - 1910 2712
1 hinged door
2 adjustable shelves
1 open niche
2 deep drawers
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill: 4.21
200 cm².
Tall units for appliances
Price group
carcase height 2210 mm
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 88N 2A 221 1117 1176 1242 1309 1378 1548 1623 1693 2292
Niche height 880 mm
1 hinged door
1 adjustable shelf
1 open niche
2 deep drawers
Tall unit for built-in appliance SU 88N 221 842 883 956 1017 1078 1189 1234 1319 1904
Niche height 880 mm
1 hinged door
1 adjustable shelf
1 open niche
1 hinged door
1 adjustable shelf
Tall unit for appliances SUMKB SA 221 1173 1236 1297 1382 1470 1650 1719 1799 2626
Niche height D SUMKB SA 221 D 1173 1236 1297 1382 1470 - - 1799 2626
upper 334 - 409 mm
lower 585 - 595 mm
1 hinged door
1 adjustable shelf
2 open niches
1 drawer
1 deep drawer
Tall unit for appliances SUMKB 2A 221 1197 1261 1334 1418 1514 1730 1790 1865 2665
Niche height D SUMKB 2A 221 D 1197 1261 1334 1418 1514 - - 1865 2665
upper 334 - 409 mm
lower 585 - 595 mm
1 hinged door
1 adjustable shelf
2 open niches
2 deep drawers
4.22 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill:
200 cm².
Tall units for appliances
Price group
carcase height 2210 mm
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SUMKB 221 912 972 1050 1124 1202 1366 1406 1485 2275
Niche height D SUMKB 221 D 912 972 1050 1124 1202 - - 1485 2275
upper 334 - 409 mm
lower 585 - 595 mm
1 hinged door
1 adjustable shelf
2 open niches
1 hinged door
1 adjustable shelf
Tall unit for appliances SULB 2A 221 1532 1626 1710 1799 1889 2147 2249 2328 3179
for free standing microwave D SULB 2A 221 D 1532 1626 1710 1799 1889 - - 2328 3179
max. 495 mm wide, 330 mm high behind
lift-up door
niche height 585 - 595 mm
1 hinged door
1 adjustable shelf
1 lift-up door
1 open niche
2 deep drawers
Tall unit for appliances SULB 221 1253 1329 1418 1502 1585 1784 1856 1949 2788
for free standing microwave D SULB 221 D 1253 1329 1418 1502 1585 - - 1949 2788
max. 495 mm wide, 330 mm high behind
lift-up door
niche height 585 - 595 mm
1 hinged door
1 adjustable shelf
1 lift-up door
1 open niche
1 hinged door
1 adjustable shelf
Tall unit for appliances SUMB SA 221 1163 1235 1305 1384 1472 1697 1746 1803 2556
Niche height D SUMB SA 221 D 1163 1235 1305 1384 1472 - - 1803 2556
upper 450 mm
lower 585 - 595 mm
1 hinged door
1 adjustable shelf
2 open niches
1 drawer
1 deep drawer
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill: 4.23
200 cm².
Tall units for appliances
Price group
carcase height 2210 mm
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SUMB 2A 221 1187 1259 1329 1408 1496 1721 1770 1827 2580
Niche height D SUMB 2A 221 D 1187 1259 1329 1408 1496 - - 1827 2580
upper 450 mm
lower 585 - 595 mm
1 hinged door
1 adjustable shelf
2 open niches
2 deep drawers
Tall unit for appliances SUMB 221 903 970 1044 1114 1183 1357 1384 1447 2189
Niche height D SUMB 221 D 903 970 1044 1114 1183 - - 1447 2189
upper 450 mm
lower 585 - 595 mm
1 hinged door
1 adjustable shelf
2 open niches
1 hinged door
1 adjustable shelf
4.24 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill:
200 cm².
Infill panels, side cladding
Price group
carcase height 2210 mm
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Infill panel for tall units SBF 15 221 231 248 267 285 305 347 369 389 461
Finish in continuous door material
split above 780 mm for the following
ranges: Fronts with horizontal graining in
ALNOPLAN.
fitted between wall and carcase
In ALNOART, ALNOCERA,
ALNOSATINA and ALNOVETRINA
door width 75 mm,
adjustment range in
carcase finish 77 - 150 mm.
Other front widths (at least 50 mm)
available with MPS 1 (apart from ALNO-
ART) on request.
Corner infill panel for tall units SEBF 20 221 V 451 470 487 506 526 588 607 627 780
Finish in continuous door material
split above 780 mm for the following
ranges: Fronts with horizontal graining in
ALNOPLAN.
For variable planning dimensions
for 90° corner solution
Min. dimension 50 mm per side.
max. 180 mm on carcase front edge per
leg
Corner infill panel for tall units SEBF 135 221 470 487 506 526 544 607 627 648 800
Finish in continuous door material
split above 780 mm for the following
ranges: Fronts with horizontal graining in
ALNOPLAN.
for 135° corner solution
1 side closed
For planning dimensions 259 x 259 mm
Side cladding RBS 221 783 863 936 1017 1928 - 2249 2273 2326
Finish in continuous door material
split above 780 mm for the following
ranges: Fronts with horizontal graining in
ALNOPLAN.
for mounting on the carcase side
50 mm wide
for carcase depth 560 mm
4.25
Tall shelf units
high-gloss lacquer
Item
carcase height 2210 mm
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
carcase depth 580 mm
width mm
Laminate
universal
veneer/
hinge
finish
Unit without plinth
Tall shelf unit 300 SR 30 221 1 668 2751 1148 1378 1638 2707 - -
370 mm deep variable width SR 00 221 V 937 3851 1419 1703 2046 3520 - -
5 adjustable shelves from 150 to 600 mm
For colours and versions,
refer to colour matrix carcase
Tall end shelf unit 300 SRA 30 221 L/R 864 3115 1208 1450 1937 3058 - -
580 mm deep
5 fixed shelves
Tall end shelf unit 300 SRE 30 221 L/R 658 2840 1004 1205 1733 2854 - -
580 mm deep
5 fixed shelves
4.26 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Carcase panels
high-gloss lacquer
Item
carcase height 2210 mm
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Unit without plinth
Infill panel for tall units 150 SBK 15 221 110 449 135 - 233 369 - -
Finish in carcase material
flush with carcase
fitted between wall and carcase
Infill panel for tall units 150 SBT 15 221 121 492 149 - 255 404 - -
Finish in carcase material
for depth adjustment between carcase
and wall
4.27
Notes
4.28
Tall units 2080 mm
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit S 30 208 814 926 1002 1065 1146 1295 1409 1484 1837
S 45 208 858 972 1049 1127 1221 1377 1506 1599 2196
2 hinged doors S 50 208 874 989 1065 1148 1251 1406 1549 1636 2316
1 fixed shelf
5 adjustable shelves S 60 208 918 1030 1107 1193 1317 1466 1637 1724 2559
410 S 30 208 4 814 926 1002 1065 1146 1295 1409 1484 1837
410 S 45 208 4 858 972 1049 1127 1221 1377 1506 1599 2196
410 S 50 208 4 874 989 1065 1148 1251 1406 1549 1636 2316
410 S 60 208 4 918 1030 1107 1193 1317 1466 1637 1724 2559
Tall unit D S 30 208 D 814 926 1002 1065 1782 - - 1484 1837
D S 45 208 D 858 972 1049 1127 1856 - - 1599 2196
same as above, but S 50 208 D 874 989 1065 1148 1978 - - 1636 2316
1 full-height hinged door D
D S 60 208 D 918 1030 1107 1193 2090 - - 1724 2559
0 Only available in ALNOPLAN, ALNODUR,
ALNOFINE, ALNOSUND, ALNOSIGN, ALNO-
GRAND, ALNOCLASS, ALNOSTRUCT.
Not available in:
Fronts with horizontal graining in ALNO-
PLAN.
Tall unit for provisions S2A 60 208 1182 1294 1371 1457 1581 1730 1901 1988 2823
1 hinged door
3 adjustable shelves
1 fixed shelf
2 deep drawers
Tall unit for broom SB 30 208 897 1009 1084 1148 1229 1378 1492 1568 1917
SB 45 208 939 1053 1129 1208 1302 1458 1586 1680 2274
1 door (dowelled) SB 50 208 956 1071 1146 1229 1332 1487 1631 1719 2394
1 fixed shelf
1 adjustable shelf SB 60 208 996 1108 1184 1271 1394 1543 1716 1801 2633
1 hook for brooms
1 holder for vacuum cleaner hose
1 hook rail
2 runners for adjustable wire baskets
3 wire baskets
Tall unit for broom D SB 30 208 D 897 1009 1084 1148 1865 - - 1568 1917
D SB 45 208 D 939 1053 1129 1208 2006 - - 1680 2274
same as above, but SB 50 208 D 956 1071 1146 1229 2059 - - 1719 2394
1 full-height hinged door D
D SB 60 208 D 996 1108 1184 1271 2168 - - 1801 2633
Only available in ALNOPLAN, ALNODUR,
ALNOFINE, ALNOSUND, ALNOSIGN, ALNO-
0
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 4.29
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for provisions SA 30 208 AK 1676 1793 1866 1930 2012 2158 2272 2347 2657
1 pull-out larder unit dowelled
with cushioned opening and closure
5 baskets
Wire basket finish anthracite grey
Matching accessories:
Electrically assisted opening ZAZ 18 Order
Orgaset ZI 3011 AG and ZI 3012 AG
Tall unit for provisions D SA 30 208 DAK 1676 1793 1866 1930 2648 - - 2347 2657
same as above, but
1 pull-out larder unit
Tall unit for provisions SA 30 208 A 1877 1993 2066 2130 2212 2358 2471 2547 2847
SA 45 208 A 1960 2073 2150 2229 2324 2478 2606 2700 3246
1 pull-out larder unit dowelled
with cushioned opening and closure
5 baskets
Arena shelf finish anthracite grey
Matching accessories:
Electrically assisted opening ZAZ 18 Order
Orgaset ZI 3011 AG and ZI 3012 AG
Tall unit for provisions D SA 30 208 DA 1877 1993 2066 2130 2848 - - 2547 2847
D SA 45 208 DA 1960 2073 2150 2229 3028 - - 2700 3246
same as above, but
1 pull-out larder unit
4.30 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for provisions SIA 30 208 1732 1845 1921 1983 2066 2213 2328 2403 2710
SIA 45 208 1768 1881 1957 2036 2130 2286 2415 2508 3060
2 hinged doors SIA 50 208 1785 1900 1976 2058 2161 2317 2460 2548 3182
1 shelf
1 fixed shelf SIA 60 208 1828 1941 2018 2103 2227 2376 2548 2634 3423
5 interior deep drawers
Tall unit for provisions D SIA 30 208 D 1732 1845 1921 1983 2701 - - 2403 2710
D SIA 45 208 D 1768 1881 1957 2036 2835 - - 2508 3060
same as above, but SIA 50 208 D 1785 1900 1976 2058 2889 - - 2548 3182
1 full-height hinged door D
D SIA 60 208 D 1828 1941 2018 2103 3000 - - 2634 3423
Only available in ALNOPLAN, ALNODUR,
0 ALNOFINE, ALNOSUND, ALNOSIGN, ALNO-
GRAND, ALNOCLASS, ALNOSTRUCT.
Not available in:
Fronts with horizontal graining in ALNO-
PLAN.
Tall unit for provisions ST 60 208 A 1875 1987 2064 2150 2274 2423 2594 2681 3516
1 door (dowelled)
1 swing-out mechanism with
4 fixed baskets
1 Orgaset
5 adjustable shelves shortened in depth
Tall unit for provisions ST 60 208 DA 1875 1987 2064 2150 2274 - - 2681 3516
same as above, but
1 full-height hinged door
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 4.31
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for provisions SM 60 208 A 3024 3138 3214 3300 3423 3572 3744 3831 4560
1 door (dowelled)
1 adjustable shelf
1 swing-out mechanism with
4 fixed baskets
1 Orgaset
1 swing-out mechanism with
5 adjustable baskets
Tall unit for provisions D SM 60 208 DA 3024 3138 3214 3300 4196 - - 3831 4560
same as above, but
1 full-height hinged door
PLAN.
Corner tall unit SE 105 208 2631 2769 2937 3106 3337 3525 3733 3862 4730
1 door (dowelled)
1 fixed shelf
5 adjustable shelves
base cover in stainless steel
Corner storage unit SE 120 208 2434 2547 2624 2711 2834 2981 3153 3241 3996
2 side panels 590 mm deep for tall units
+ plinth height
available in all panel colours
Carcase interior colour white or anthracite
grey
1 top shelf 25 mm thick
4 shelves 25 mm thick
1 sliding door with sliding door fitting and
plinth element
Handle vertically over the complete front
height as opening assistance in stainless
steel- effect or aluminium black
Planning dimension 1200 x 600 mm
4.32 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 88 208 920 1039 1131 1223 1313 1490 1598 1719 2629
Niche height 878 mm
1 hinged door
1 hinged appliance door
1 hinged door
2 adjustable shelves
Tall unit for built-in appliance SU 88 ISIA 208 1572 1691 1783 1875 1965 2142 2250 2371 3281
Niche height 878 mm
1 hinged door
1 hinged appliance door
1 hinged door
1 internal drawer
2 interior deep drawers
Servodrive assisted opening is available
for appliance hinged door at
MPS SERVO KS surcharge.
Tall unit for built-in appliance SU 88 S2A 208 1363 1485 1574 1692 1809 2071 2199 2300 3290
Niche height 878 mm
1 hinged door
1 hinged appliance door
1 drawer
2 deep drawers
Servodrive assisted opening is available
for appliance hinged door at
MPS SERVO KS surcharge.
Tall unit for built-in appliance SU 88 2A 208 1184 1305 1392 1495 1592 1828 1973 2078 3000
Niche height 878 mm
1 hinged door
1 hinged appliance door
2 deep drawers
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill: 4.33
200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 102 208 922 1033 1126 1228 1334 1519 1636 1710 2573
Niche height 1025 mm
1 hinged door
1 hinged appliance door
1 hinged door
1 adjustable shelf
Tall unit for built-in appliance SU 102 2A 208 1196 1325 1412 1520 1633 1877 2025 2084 2961
Niche height 1025 mm
1 hinged door
1 hinged appliance door
2 deep drawers
Tall unit for built-in appliance SU 122 A 208 1001 1112 1185 1282 1413 1621 1828 1901 2757
Niche height 1225 mm
1 hinged door
1 hinged appliance door
1 deep drawer
Tall unit for built-in appliance SU 122 2TA 208 1049 1167 1256 1358 1456 1691 1834 1942 2870
Niche height 1225 mm
1 hinged door
2 hinged appliance doors
1 deep drawer
4.34 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill:
200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 140 208 933 1020 1129 1218 1307 1475 1556 1694 2646
Niche height 1400 mm
1 hinged door
1 adjustable shelf
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 145 2T 208 925 1042 1130 1232 1339 1542 1655 1779 2537
niche height 1450 mm
1 hinged door
1 adjustable shelf
2 hinged appliance doors
Tall unit for built-in appliance SU 145 2T 208 4 904 1021 1109 1211 1318 1521 1634 1757 2516
niche height 1450 mm
1 hinged door
2 hinged appliance doors
Tall unit for built-in appliance SU 152 2T 208 925 1030 1136 1240 1339 1525 1595 1709 2643
niche height 1446 - 1525 mm
1 hinged door
1 adjustable shelf
2 hinged appliance doors
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill: 4.35
200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 152 208 933 1050 1157 1235 1315 1490 1573 1704 2658
niche height 1528 mm
1 hinged door
1 adjustable shelf
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 158 2T 208 886 997 1072 1168 1299 1506 1712 1787 2647
Niche height 1580 mm
1 hinged door
2 hinged appliance doors
Tall unit for built-in appliance SU 159 2T 208 1 898 1009 1102 1204 1310 1494 1612 1685 2550
niche height 1590 mm
1 hinged door
2 hinged appliance doors
Tall unit for built-in appliance SU 159 208 896 1015 1107 1199 1289 1466 1574 1694 2606
niche height 1450 - 1590 mm
1 hinged door
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 159 2T 208 896 1015 1107 1199 1289 1466 1574 1694 2606
SU 145 2T 208 3 896 1015 1107 1199 1289 1466 1574 1694 2606
same as above, but
2 hinged appliance doors
4.36 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill:
200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 178 208 899 1001 1091 1197 1317 1512 1616 1747 2504
niche height 1790 mm
1 flap door
1 hinged appliance door
1 deep drawer for appliances
Tall unit for built-in appliance SU 178 208 3 813 943 1020 1106 1230 1379 1551 1637 2477
niche height 1780-1790 mm
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 178 2T 208 820 932 1009 1095 1219 1368 1540 1626 2466
same as above, but
2 hinged appliance doors
Tall unit for built-in appliance SU 178 2T 208 3 968 1071 1161 1267 1384 1580 1685 1817 2569
niche height 1790 mm
1 flap door
2 hinged appliance doors
Tall unit for built-in appliance SU 178 208 2 980 1083 1174 1279 1397 1593 1698 1829 2583
same as above, but
1 hinged appliance door, dowelled
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill: 4.37
200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 178 2T 208 2 962 1086 1178 1287 1399 1586 1676 1779 2666
Niche height 1780 mm
1 flap door
2 hinged appliance doors
Tall unit for built-in appliance SU 178 208 1 985 1113 1206 1302 1409 1593 1704 1779 2640
niche height 1580 - 1790 mm
1 flap door
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 178 2T 208 1 973 1101 1193 1289 1396 1580 1692 1767 2628
same as above, but
Niche height 1580 mm
2 hinged appliance doors
Tall unit for built-in appliance D SU 178 208 1 D 985 1113 1206 1302 2178 - - 1779 2640
same as above, but
1 full-height hinged door
Tall unit for appliances SU 88 72 208 907 1026 1119 1210 1301 1477 1585 1705 2616
Niche height
upper 878 mm
lower 716 mm
1 hinged door
2 hinged appliance doors
4.38 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill:
200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SU 102 72 208 984 1112 1205 1301 1408 1592 1703 1778 2639
Niche height
upper 1025 mm
lower 716 mm
1 flap door
2 hinged appliance doors
Tall unit for appliances SU 88 88 208 974 1099 1190 1299 1411 1598 1687 1791 2679
Niche height
upper 878 mm
lower 878 mm
1 flap door
2 hinged appliance doors
Tall unit for appliances SUB 88 208 868 957 1031 1113 1193 1345 1396 1474 2223
Niche height D SUB 88 208 D 868 957 1031 1113 1193 - - 1474 2223
upper 585 - 595 mm
lower 878 mm
1 hinged door
1 adjustable shelf
1 open niche
1 hinged appliance door
Tall unit for appliances SUM 102 208 5 805 886 965 1052 1139 1282 1345 1440 2239
Niche height D SUM 102 208 5 D 805 886 965 1052 1139 - - 1440 2239
at top 450 mm
at bottom 1025 mm
1 hinged door
1 adjustable shelf
1 open niche
1 hinged appliance door
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill: 4.39
200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SUB 102 208 820 909 983 1066 1145 1297 1348 1426 2178
Niche height D SUB 102 208 D 820 909 983 1066 1145 - - 1426 2178
upper 585 - 595 mm
lower 1025 mm
1 hinged door
1 open niche
1 hinged appliance door
Tall unit for built-in appliance SUM 208 901 982 1060 1148 1234 1378 1441 1535 2331
niche height 380 - 450 mm D SUM 208 D 901 982 1060 1148 1234 - - 1535 2331
1 hinged door
1 adjustable shelf
1 open niche
1 hinged door
2 adjustable shelves
The aperture size may be adjusted with
infill panel in door material.
Tall unit for built-in appliance SUB 208 2 886 957 1034 1102 1172 1306 1368 1470 2236
niche height 585 - 595 mm D SUB 208 2 D 886 957 1034 1102 1172 - - 1470 2236
1 hinged door
1 adjustable shelf
1 open niche
1 hinged door
2 adjustable shelves
The aperture size may be adjusted with
infill panel in door material.
Tall unit for built-in appliance D SUB ISIA 208 2 1538 1609 1686 1754 1824 1958 2020 2122 2888
niche height 585 - 595 mm D SUB ISIA 208 2 D 1538 1609 1686 1754 1824 - - 2122 2888
1 hinged door
1 adjustable shelf
1 open niche
1 hinged door
1 internal drawer
2 interior deep drawers
4.40 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill:
200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SUB 2A 208 1 1143 1215 1286 1366 1442 1635 1733 1821 2599
niche height 585 - 595 mm D SUB 2A 208 1 D 1143 1215 1286 1366 1442 - - 1821 2599
1 hinged door
1 adjustable shelf
1 open niche
2 deep drawers
Tall unit for built-in appliance SUB S2A 208 1344 1418 1491 1584 1682 1900 1982 2066 2910
niche height 585 - 595 mm D SUB S2A 208 D 1344 1418 1491 1584 1682 - - 2066 2910
1 hinged door
1 adjustable shelf
1 open niche
1 drawer
2 deep drawers
The aperture size may be adjusted with
infill panel in door material.
Tall unit for built-in appliance SUB 2A 208 1165 1252 1324 1396 1474 1668 1758 1847 2625
niche height 585 - 595 mm D SUB 2A 208 D 1165 1252 1324 1396 1474 - - 1847 2625
1 hinged door
2 adjustable shelves
1 open niche
2 deep drawers
The aperture size may be adjusted with
infill panel in door material.
Tall unit for built-in appliance SUB 208 901 971 1049 1116 1185 1320 1381 1483 2249
niche height 585 - 595 mm D SUB 208 D 901 971 1049 1116 1185 - - 1483 2249
1 hinged door
2 adjustable shelves
1 open niche
1 hinged door
1 adjustable shelf
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill: 4.41
200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 88N 2A 208 1108 1175 1239 1301 1362 1543 1605 1660 2215
Niche height 880 mm
1 hinged door
1 adjustable shelf
1 open niche
2 deep drawers
Tall unit for built-in appliance SU 88N 208 829 879 949 1005 1059 1180 1213 1281 1825
Niche height 880 mm
1 hinged door
1 adjustable shelf
1 open niche
1 hinged door
1 adjustable shelf
Tall unit for appliances SUMKB SA 208 1165 1235 1294 1374 1455 1646 1704 1766 2552
Niche height D SUMKB SA 208 D 1165 1235 1294 1374 1455 - - 1766 2552
upper 334 - 409 mm
lower 585 - 595 mm
1 hinged door
1 adjustable shelf
2 open niches
1 drawer
1 deep drawer
Tall unit for appliances SUMKB 2A 208 1189 1260 1331 1410 1499 1726 1775 1832 2591
Niche height D SUMKB 2A 208 D 1189 1260 1331 1410 1499 - - 1832 2591
upper 334 - 409 mm
lower 585 - 595 mm
1 hinged door
1 adjustable shelf
2 open niches
2 deep drawers
4.42 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill:
200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SUMKB 208 901 969 1043 1113 1183 1358 1385 1449 2197
Niche height D SUMKB 208 D 901 969 1043 1113 1183 - - 1449 2197
upper 334 - 409 mm
lower 585 - 595 mm
1 hinged door
1 adjustable shelf
2 open niches
1 hinged door
1 adjustable shelf
Tall unit for appliances SUMB SA 208 1125 1187 1244 1315 1399 1617 1691 1744 2430
Niche height D SUMB SA 208 D 1125 1187 1244 1315 1399 - - 1744 2430
upper 450 mm
lower 585 - 595 mm
1 hinged door
2 open niches
1 drawer
1 deep drawer
Tall unit for appliances SUMB 2A 208 1149 1211 1268 1339 1423 1641 1715 1768 2454
Niche height D SUMB 2A 208 D 1149 1211 1268 1339 1423 - - 1768 2454
upper 450 mm
lower 585 - 595 mm
1 hinged door
2 open niches
2 deep drawers
Tall unit for appliances SUMB 208 861 921 980 1043 1108 1274 1326 1385 2062
Niche height D SUMB 208 D 861 921 980 1043 1108 - - 1385 2062
upper 450 mm
lower 585 - 595 mm
1 hinged door
2 open niches
1 hinged door
1 adjustable shelf
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill: 4.43
200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SULB 2A 208 1496 1582 1651 1734 1820 2072 2198 2274 3060
for free standing microwave D SULB 2A 208 D 1496 1582 1651 1734 1820 - - 2274 3060
max. 495 mm wide, 330 mm high behind
lift-up door
niche height 585 - 595 mm
1 hinged door
1 lift-up door
1 open niche
2 deep drawers
Tall unit for appliances SULB 208 1212 1281 1356 1433 1511 1703 1800 1890 2664
for free standing microwave D SULB 208 D 1212 1281 1356 1433 1511 - - 1890 2664
max. 495 mm wide, 330 mm high behind
lift-up door
niche height 585 - 595 mm
1 hinged door
1 lift-up door
1 open niche
1 hinged door
1 adjustable shelf
Infill panel for tall units SBF 15 208 219 237 255 275 294 337 356 377 444
Finish in continuous door material
split above 780 mm for the following
ranges: Fronts with horizontal graining in
ALNOPLAN.
fitted between wall and carcase
In ALNOART, ALNOCERA,
ALNOSATINA and ALNOVETRINA
door width 75 mm,
adjustment range in
carcase finish 77 - 150 mm.
Other front widths (at least 50 mm)
available with MPS 1 (apart from ALNO-
ART) on request.
4.44 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill:
200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Corner infill panel for tall units SEBF 20 208 V 430 451 470 487 506 567 588 607 751
Finish in continuous door material
split above 780 mm for the following
ranges: Fronts with horizontal graining in
ALNOPLAN.
For variable planning dimensions
for 90° corner solution
Min. dimension 50 mm per side.
Max. 180 mm at the carcase front edge
per side.
Corner infill panel for tall units SEBF 135 208 454 473 494 510 529 592 611 630 775
Finish in continuous door material
split above 780 mm for the following
ranges: Fronts with horizontal graining in
ALNOPLAN.
for 135° corner solution
1 side closed
For planning dimensions 259 x 259 mm
Not available for ALNOART, ALNO-
CERA, ALNOSATINA and ALNOVETRINA.
Side cladding RBS 208 769 846 918 992 1854 - 2162 2182 2211
Finish in continuous door material
split above 780 mm for the following
ranges: Fronts with horizontal graining in
ALNOPLAN.
for mounting on the carcase side
50 mm wide
for carcase depth 560 mm
4.45
high-gloss lacquer
Item
carcase height 2080 mm
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
carcase depth 580 mm
width mm
Laminate
universal
veneer/
hinge
finish
Unit without plinth
Tall shelf unit 300 SR 30 208 1 657 2658 1125 1350 1631 2577 - -
370 mm deep variable width SR 00 208 V 928 3755 1395 1674 2038 3389 - -
5 adjustable shelves from 150 to 600 mm
For colours and versions,
refer to colour matrix carcase
Tall end shelf unit 300 SRA 30 208 L/R 850 2998 1190 1428 1865 2934 - -
580 mm deep
5 fixed shelves
Tall end shelf unit 300 SRE 30 208 L/R 645 2721 984 1181 1660 2729 - -
580 mm deep
5 fixed shelves
4.46 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
high-gloss lacquer
Item
carcase height 2080 mm
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Unit without plinth
Infill panel for tall units 150 SBK 15 208 105 442 126 - 230 362 - -
Finish in carcase material
flush with carcase
fitted between wall and carcase
Infill panel for tall units 150 SBT 15 208 113 487 141 - 251 399 - -
Finish in carcase material
for depth adjustment between carcase
and wall
4.47
4.48
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit S 30 195 743 858 924 997 1064 1170 1243 1383 1602
S 45 195 786 904 971 1054 1137 1243 1339 1474 1886
2 hinged doors S 50 195 800 918 989 1072 1155 1289 1362 1493 1969
1 fixed shelf
5 adjustable shelves S 60 195 848 959 1033 1119 1211 1348 1452 1582 2247
410 S 30 195 4 743 858 924 997 1064 1170 1243 1383 1602
410 S 45 195 4 786 904 971 1054 1137 1243 1339 1474 1886
410 S 50 195 4 800 918 989 1072 1155 1289 1362 1493 1969
410 S 60 195 4 848 959 1033 1119 1211 1348 1452 1582 2247
Tall unit D S 30 195 D 743 858 924 997 1691 - - 1383 1602
D S 45 195 D 786 904 971 1054 1765 - - 1474 1886
same as above, but S 50 195 D 800 918 989 1072 1868 - - 1493 1969
1 full-height hinged door D
D S 60 195 D 848 959 1033 1119 1968 - - 1582 2247
Only available in ALNOPLAN, ALNODUR,
ALNOFINE, ALNOSUND, ALNOSIGN, ALNO-
GRAND, ALNOCLASS, ALNOSTRUCT.
Tall unit for provisions S2A 60 195 1112 1223 1297 1383 1475 1612 1716 1846 2511
1 hinged door
3 adjustable shelves
1 fixed shelf
2 deep drawers
Tall unit for broom SB 30 195 871 986 1053 1125 1192 1298 1372 1512 1726
SB 45 195 916 1032 1100 1182 1267 1372 1468 1602 2007
1 door (dowelled) SB 50 195 934 1053 1124 1207 1290 1424 1497 1628 2097
1 fixed shelf
1 hook for brooms SB 60 195 974 1085 1160 1245 1337 1475 1579 1709 2367
1 holder for vacuum cleaner hose
1 hook rail
2 runners for adjustable wire baskets
3 wire baskets
Tall unit for broom D SB 30 195 D 871 986 1053 1125 1820 - - 1512 1726
D SB 45 195 D 916 1032 1100 1182 1958 - - 1602 2007
same as above, but SB 50 195 D 934 1053 1124 1207 2003 - - 1628 2097
1 full-height hinged door D
D SB 60 195 D 974 1085 1160 1245 2094 - - 1709 2367
Only available in ALNOPLAN, ALNODUR,
ALNOFINE, ALNOSUND, ALNOSIGN, ALNO-
GRAND, ALNOCLASS, ALNOSTRUCT.
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 4.49
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for provisions SA 30 195 AK 1637 1757 1822 1893 1962 2066 2138 2280 2454
1 pull-out larder unit dowelled
with cushioned opening and closure
5 baskets
Wire basket finish anthracite grey
Matching accessories:
Electrically assisted opening ZAZ 18 Order
Orgaset ZI 3011 AG and ZI 3012 AG
Tall unit for provisions D SA 30 195 DAK 1637 1757 1822 1893 2590 - - 2280 2454
same as above, but
1 pull-out larder unit
Tall unit for provisions SA 30 195 A 1856 1977 2041 2111 2182 2285 2357 2499 2663
SA 45 195 A 1919 2035 2102 2184 2267 2374 2467 2604 2962
1 pull-out larder unit dowelled
with cushioned opening and closure
5 baskets
Arena shelf finish anthracite grey
Matching accessories:
Electrically assisted opening ZAZ 18 Order
Orgaset ZI 3011 AG and ZI 3012 AG
Tall unit for provisions D SA 30 195 DA 1856 1977 2041 2111 2809 - - 2499 2663
D SA 45 195 DA 1919 2035 2102 2184 2959 - - 2604 2962
same as above, but
1 pull-out larder unit
4.50 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for provisions SIA 30 195 1705 1822 1887 1959 2027 2133 2206 2347 2518
SIA 45 195 1745 1862 1929 2011 2096 2201 2297 2432 2797
2 hinged doors SIA 50 195 1760 1878 1949 2032 2115 2249 2323 2453 2880
1 adjustable shelf
1 fixed shelf SIA 60 195 1806 1919 1993 2078 2171 2307 2411 2542 3158
5 interior deep drawers
Tall unit for provisions D SIA 30 195 D 1705 1822 1887 1959 2654 - - 2347 2518
D SIA 45 195 D 1745 1862 1929 2011 2788 - - 2432 2797
same as above, but SIA 50 195 D 1760 1878 1949 2032 2828 - - 2453 2880
1 full-height hinged door D
D SIA 60 195 D 1806 1919 1993 2078 2927 - - 2542 3158
Only available in ALNOPLAN, ALNODUR,
ALNOFINE, ALNOSUND, ALNOSIGN, ALNO-
GRAND, ALNOCLASS, ALNOSTRUCT.
Tall unit for provisions ST 60 195 A 1805 1916 1990 2076 2168 2305 2409 2539 3204
1 door (dowelled)
1 swing-out mechanism with
4 fixed baskets
1 Orgaset
5 adjustable shelves shortened in depth
Tall unit for provisions ST 60 195 DA 1805 1916 1990 2076 2168 - - 2539 3204
same as above, but
1 full-height hinged door
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 4.51
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for provisions SM 60 195 A 3002 3114 3189 3273 3366 3503 3608 3737 4293
1 door (dowelled)
1 swing-out mechanism with
4 fixed baskets
1 Orgaset
1 swing-out mechanism with
5 adjustable baskets
Tall unit for provisions D SM 60 195 DA 3002 3114 3189 3273 4123 - - 3737 4293
same as above, but
1 full-height hinged door
Corner tall unit SE 105 195 2499 2643 2804 2976 3188 3372 3508 3684 4377
1 door (dowelled)
1 fixed shelf
5 adjustable shelves
base cover in stainless steel
Corner storage unit SE 120 195 2406 2518 2593 2680 2772 2908 3011 3142 3725
2 side panels 590 mm deep for tall units
+ plinth height
available in all panel colours
Carcase interior colour white or anthracite
grey
1 top shelf 25 mm thick
4 shelves 25 mm thick
1 sliding door with sliding door fitting and
plinth element
Handle vertically over the complete front
height as opening assistance in stainless
steel- effect or aluminium black
Planning dimension 1200 x 600 mm
4.52 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 88 195 962 1075 1167 1256 1350 1528 1617 1727 2586
Niche height 878 mm
1 flap door
1 hinged appliance door
1 hinged door
2 adjustable shelves
Tall unit for built-in appliance SU 88 ISIA 195 1614 1727 1819 1908 2002 2180 2269 2379 3238
Niche height 878 mm
1 flap door
1 hinged appliance door
1 hinged door
1 internal drawer
2 interior deep drawers
Servodrive assisted opening is available
for appliance hinged door at
MPS SERVO KS surcharge.
Tall unit for built-in appliance SU 88 S2A 195 1407 1523 1610 1726 1848 2109 2219 2309 3248
Niche height 878 mm
1 flap door
1 hinged appliance door
1 drawer
2 deep drawers
Tall unit for built-in appliance SU 88 2A 195 1227 1341 1427 1528 1629 1867 1991 2086 2956
Niche height 878 mm
1 flap door
1 hinged appliance door
2 deep drawers
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill: 4.53
200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 102 195 965 1070 1161 1261 1372 1557 1654 1719 2530
Niche height 1025 mm
1 flap door
1 hinged appliance door
1 hinged door
1 adjustable shelf
Tall unit for built-in appliance SU 102 2A 195 1239 1361 1447 1552 1671 1916 2043 2093 2917
Niche height 1025 mm
1 flap door
1 hinged appliance door
2 deep drawers
Tall unit for built-in appliance SU 122 A 195 1042 1148 1220 1315 1449 1658 1845 1908 2712
Niche height 1225 mm
1 flap door
1 hinged appliance door
1 deep drawer
Tall unit for built-in appliance SU 122 2TA 195 1119 1230 1319 1419 1521 1756 1880 1978 2853
Niche height 1225 mm
1 flap door
2 hinged appliance doors
1 deep drawer
4.54 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill:
200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 140 195 924 1018 1124 1207 1289 1466 1534 1655 2560
Niche height 1400 mm
1 hinged door
1 adjustable shelf
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 145 2T 195 862 971 1044 1139 1240 1434 1573 1692 2379
niche height 1450 mm
1 hinged door
2 hinged appliance doors
Tall unit for built-in appliance SU 145 2T 195 4 959 1070 1157 1257 1368 1572 1666 1779 2486
niche height 1450 mm
1 flap door
2 hinged appliance doors
Tall unit for built-in appliance SU 152 2T 195 862 959 1051 1146 1240 1418 1512 1622 2486
niche height 1446 - 1525 mm
1 hinged door
2 hinged appliance doors
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill: 4.55
200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 152 195 883 991 1083 1155 1228 1395 1502 1630 2512
niche height 1528 mm
1 hinged door
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 158 2T 195 929 1032 1107 1201 1336 1544 1730 1796 2605
Niche height 1580 mm
1 flap door
2 hinged appliance doors
Tall unit for built-in appliance SU 159 2T 195 1 940 1046 1136 1236 1347 1532 1630 1694 2507
niche height 1590 mm
1 flap door
2 hinged appliance doors
Tall unit for built-in appliance SU 159 195 951 1064 1155 1244 1339 1517 1604 1716 2573
niche height 1450 - 1590 mm
1 flap door
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 159 2T 195 937 1051 1142 1231 1326 1503 1592 1702 2562
SU 145 2T 195 3 937 1051 1142 1231 1326 1503 1592 1702 2562
same as above, but
2 hinged appliance doors
4.56 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill:
200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 178 195 733 823 900 990 1117 1268 1424 1500 2296
niche height 1788 mm
1 hinged appliance door
1 deep drawer for appliances
Tall unit for built-in appliance SU 178 195 1 811 923 998 1082 1175 1312 1417 1546 2212
niche height 1585 - 1788 mm
1 hinged appliance door, dowelled
Tall unit for built-in appliance D SU 178 195 1 D 811 923 998 1082 1932 - - 1546 2212
same as above, but
1 full-height hinged door
Tall unit for built-in appliance SU 178 195 2 807 898 973 1064 1190 1340 1498 1574 2364
niche height 1788 mm
1 hinged appliance door, dowelled
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill: 4.57
200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 178 2T 195 2 805 930 1006 1106 1208 1344 1442 1497 2252
Niche height 1780 mm
2 hinged appliance doors
Tall unit for built-in appliance SU 178 2T 195 3 800 890 966 1056 1182 1332 1491 1567 2357
niche height 1788 mm
2 hinged appliance doors
Tall unit for built-in appliance SU 178 2T 195 799 910 984 1070 1162 1299 1404 1533 2200
niche height 1780-1790 mm
2 hinged appliance doors
1780-1790
Servodrive assisted opening is available
for appliance hinged door at
MPS SERVO KS surcharge.
Tall unit for appliances SU 88 72 195 951 1064 1155 1244 1339 1517 1604 1716 2573
Niche height
upper 878 mm
lower 716 mm
1 flap door
2 hinged appliance doors
4.58 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill:
200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SU 102 72 195 808 920 995 1079 1172 1309 1413 1543 2209
Niche height
upper 1025 mm
lower 716 mm
2 hinged appliance doors
Tall unit for appliances SU 88 88 195 805 930 1006 1106 1208 1344 1442 1497 2252
Niche height
upper 878 mm
lower 878 mm
2 hinged appliance doors
Tall unit for appliances SUB 88 195 809 890 950 1024 1099 1242 1318 1391 2069
Niche height D SUB 88 195 D 809 890 950 1024 1099 - - 1391 2069
upper 585 - 595 mm
lower 878 mm
1 hinged door
1 open niche
1 hinged appliance door
Tall unit for appliances SUM 102 195 4 728 818 893 974 1054 1206 1257 1334 2090
Niche height D SUM 102 195 4 D 728 818 893 974 1054 - - 1334 2090
at top 450 mm
at bottom 1025 mm
1 hinged door
1 open niche
1 hinged appliance door
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill: 4.59
200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SUB 102 195 909 940 990 1037 1168 1256 1303 1372 2169
Niche height D SUB 102 195 D 909 940 990 1037 1168 - - 1372 2169
upper 585 - 595 mm
lower 1025 mm
1 flap door
1 open niche
1 hinged appliance door
Tall unit for built-in appliance SUM 195 872 961 1035 1118 1197 1349 1400 1478 2227
niche height 380 - 450 mm D SUM 195 D 872 961 1035 1118 1197 - - 1478 2227
1 hinged door
1 adjustable shelf
1 open niche
1 hinged door
2 adjustable shelves
The aperture size may be adjusted with
infill panel in door material.
Tall unit for built-in appliance SUB 195 2 845 922 997 1058 1121 1263 1313 1398 2119
niche height 585 - 595 mm D SUB 195 2 D 845 922 997 1058 1121 - - 1398 2119
1 hinged door
1 adjustable shelf
1 open niche
1 hinged door
2 adjustable shelves
The aperture size may be adjusted with
infill panel in door material.
Tall unit for built-in appliance D SUB ISIA 195 2 1497 1574 1649 1710 1773 1915 1965 2050 2771
niche height 585 - 595 mm D SUB ISIA 195 2 D 1497 1574 1649 1710 1773 - - 2050 2771
1 hinged door
1 adjustable shelf
1 open niche
1 hinged door
1 internal drawer
2 interior deep drawers
4.60 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill:
200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SUB 2A 195 1 1124 1203 1272 1345 1415 1617 1702 1773 2504
niche height 585 - 595 mm D SUB 2A 195 1 D 1124 1203 1272 1345 1415 - - 1773 2504
1 hinged door
1 adjustable shelf
1 open niche
2 deep drawers
Tall unit for built-in appliance SUB 2A 195 1133 1199 1270 1346 1427 1622 1699 1777 2507
niche height 585 - 595 mm D SUB 2A 195 D 1133 1199 1270 1346 1427 - - 1777 2507
1 hinged door
1 adjustable shelf
1 open niche
2 deep drawers
Tall unit for built-in appliance SUB S2A 195 1317 1397 1468 1556 1646 1873 1943 2008 2807
niche height 585 - 595 mm D SUB S2A 195 D 1317 1397 1468 1556 1646 - - 2008 2807
1 hinged door
1 adjustable shelf
1 open niche
1 drawer
2 deep drawers
Tall unit for built-in appliance SUB 195 869 917 993 1065 1137 1273 1321 1412 2130
niche height 585 - 595 mm D SUB 195 D 869 917 993 1065 1137 - - 1412 2130
1 hinged door
1 adjustable shelf
1 open niche
1 hinged door
1 adjustable shelf
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill: 4.61
200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 88N 2A 195 1049 1107 1156 1210 1267 1439 1526 1576 2061
Niche height 880 mm
1 hinged door
1 open niche
2 deep drawers
Tall unit for built-in appliance SU 88N 195 771 812 867 916 965 1077 1134 1199 1671
Niche height 880 mm
1 hinged door
1 open niche
1 hinged door
1 adjustable shelf
Tall unit for appliances SUMKB SA 195 1103 1165 1209 1282 1357 1540 1622 1680 2395
Niche height D SUMKB SA 195 D 1103 1165 1209 1282 1357 - - 1680 2395
upper 334 - 409 mm
lower 585 - 595 mm
1 hinged door
2 open niches
1 drawer
1 deep drawer
Tall unit for appliances SUMKB 2A 195 1127 1190 1246 1318 1401 1620 1693 1746 2434
Niche height D SUMKB 2A 195 D 1127 1190 1246 1318 1401 - - 1746 2434
upper 334 - 409 mm
lower 585 - 595 mm
1 hinged door
2 open niches
2 deep drawers
4.62 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill:
200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SUMKB 195 842 901 960 1023 1087 1254 1306 1366 2043
Niche height D SUMKB 195 D 842 901 960 1023 1087 - - 1366 2043
upper 334 - 409 mm
lower 585 - 595 mm
1 hinged door
2 open niches
1 hinged door
1 adjustable shelf
Tall unit for appliances SUMB SA 195 1167 1223 1279 1348 1436 1655 1708 1752 2387
D SUMB SA 195 D 1167 1223 1279 1348 1436 - - 1752 2387
Niche height
upper 450 mm
lower 585 - 595 mm
1 flap door
2 open niches
1 drawer
1 deep drawer
Tall unit for appliances SUMB 2A 195 1191 1247 1303 1372 1460 1679 1732 1776 2411
Niche height D SUMB 2A 195 D 1191 1247 1303 1372 1460 - - 1776 2411
upper 450 mm
lower 585 - 595 mm
1 flap door
2 open niches
2 deep drawers
Tall unit for appliances SUMB 195 905 958 1017 1077 1146 1313 1345 1395 2020
Niche height D SUMB 195 D 905 958 1017 1077 1146 - - 1395 2020
upper 450 mm
lower 585 - 595 mm
1 flap door
2 open niches
1 hinged door
1 adjustable shelf
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill: 4.63
200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SULB 2A 195 1537 1618 1685 1767 1855 2108 2215 2281 3015
for free standing microwave D SULB 2A 195 D 1537 1618 1685 1767 1855 - - 2281 3015
max. 495 mm wide, 330 mm high behind
lift-up door
niche height 585 - 595 mm
1 flap door
1 lift-up door
1 open niche
2 deep drawers
Tall unit for appliances SULB 195 1256 1319 1392 1468 1549 1743 1820 1899 2621
for free standing microwave D SULB 195 D 1256 1319 1392 1468 1549 - - 1899 2621
max. 495 mm wide, 330 mm high behind
lift-up door
niche height 585 - 595 mm
1 flap door
1 lift-up door
1 open niche
1 hinged door
1 adjustable shelf
Infill panel for tall units SBF 15 195 205 223 241 260 278 321 342 360 426
Finish in continuous door material
fitted between wall and carcase
In ALNOART, ALNOCERA,
ALNOSATINA and ALNOVETRINA
door width 75 mm,
adjustment range in
carcase finish 77 - 150 mm.
Other front widths (at least 50 mm)
available with MPS 1 (apart from ALNO-
ART) on request.
4.64 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill:
200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Corner infill panel for tall units SEBF 20 195 V 409 426 448 463 482 541 564 580 716
Finish in continuous door material
For variable planning dimensions
for 90° corner solution
Min. dimension 50 mm per side.
max. 180 mm on carcase front edge per
leg
Corner infill panel for tall units SEBF 135 195 430 451 470 487 506 567 588 607 742
Finish in continuous door material
for 135° corner solution
1 side closed
For planning dimensions 259 x 259 mm
Side cladding RBS 195 759 829 899 969 1780 - 2076 2092 2093
Finish in door material
for mounting on the carcase side
50 mm wide
for carcase depth 560 mm
Height- and depth-variable side RBSS V 776 850 924 996 1900 - - 2329 2357
panelling
Finish in door material
for mounting on the carcase side
Height variable from 777 to 1946 mm
50 mm wide
Depth variable from 100 to 732 mm
Tall unit top box AK 30 26 313 330 345 361 381 431 441 455 562
AK 45 26 339 357 369 389 409 460 467 480 590
1 flap door AK 50 26 346 365 381 395 417 475 482 505 631
carcase height 260 mm
AK 60 26 363 376 394 409 431 489 504 515 642
4.65
high-gloss lacquer
Item
carcase height 1950 mm
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Unit without plinth
Tall shelf unit 300 SR 30 195 1 648 2558 1099 1319 1617 2483 - -
370 mm deep variable width SR 00 195 V 918 3656 1369 1643 2024 3296 - -
4 adjustable shelves from 150 to 600 mm
For colours and versions,
refer to colour matrix carcase
Tall end shelf unit 300 SRA 30 195 L/R 815 2871 1139 1367 1785 2802 - -
580 mm deep
4 fixed shelves
Tall end shelf unit 300 SRE 30 195 L/R 640 2635 965 1158 1611 2628 - -
580 mm deep
4 fixed shelves
4.66
high-gloss lacquer
Item
carcase height 1950 mm
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Unit without plinth
Infill panel for tall unit 150 SBK 15 195 102 424 120 - 220 349 - -
Finish in carcase material
flush with carcase
fitted between wall and carcase
Infill panel for tall units 150 SBT 15 195 111 469 135 - 244 392 - -
Finish in carcase material
for depth adjustment between carcase
and wall
4.67
4.68
A78
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit S 30 156 696 786 864 906 947 1066 1102 1225 1497
S 45 156 744 834 907 950 999 1116 1171 1287 1769
2 hinged doors S 50 156 754 848 918 960 1011 1136 1194 1305 1859
1 fixed shelf
4 adjustable shelves S 60 156 796 882 957 1010 1066 1176 1248 1355 2046
410 S 30 156 4 687 779 856 899 939 1058 1094 1218 1490
410 S 45 156 4 735 827 900 942 991 1108 1163 1280 1762
410 S 50 156 4 747 840 910 953 1004 1129 1186 1297 1852
410 S 60 156 4 787 875 950 1003 1058 1169 1241 1347 2040
Tall unit D S 30 156 D 696 786 864 906 1547 - - 1225 1497
D S 45 156 D 744 834 907 950 1599 - - 1287 1769
same as above, but S 50 156 D 754 848 918 960 1680 - - 1305 1859
1 full-height hinged door D
D S 60 156 D 796 882 957 1010 1770 - - 1355 2046
Only available in ALNOPLAN, ALNODUR,
ALNOFINE, ALNOSUND, ALNOSIGN, ALNO-
GRAND, ALNOCLASS, ALNOSTRUCT.
Tall unit S 30 156 1 696 772 840 900 966 1067 1115 1190 1492
S 45 156 1 742 821 891 955 1025 1140 1191 1261 1764
1 door (dowelled) S 50 156 1 752 829 899 970 1039 1155 1213 1285 1847
1 fixed shelf
3 adjustable shelves S 60 156 1 786 864 936 1015 1090 1211 1271 1359 2031
Tall unit for broom SB 60 156 898 984 1059 1112 1168 1278 1350 1457 2143
1 door (dowelled)
1 hook for brooms
1 holder for vacuum cleaner hose
1 hook rail
2 runners for adjustable wire baskets
3 wire baskets
Tall unit for broom D SB 60 156 D 898 984 1059 1112 1872 - - 1457 2143
same as above, but
1 full-height hinged door
Tall unit for broom SB 60 156 1 889 966 1039 1117 1192 1313 1373 1461 2129
1 door (dowelled)
1 hook for brooms
1 holder for vacuum cleaner hose
1 hook rail
2 runners for adjustable wire baskets
3 wire baskets
4.69
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for provisions SA 30 156 AK 1566 1664 1736 1778 1821 1936 1972 2095 2324
1 pull-out larder unit dowelled
with cushioned opening and closure
4 baskets
Wire basket finish anthracite grey
Matching accessories:
Electrically assisted opening ZAZ 18 Order
Orgaset ZI 3011 AG and ZI 3012 AG
Tall unit for provisions D SA 30 156 DAK 1566 1664 1736 1778 2421 - - 2095 2324
same as above, but
1 pull-out larder unit
Tall unit for provisions SA 30 156 1 AK 1568 1644 1715 1772 1838 1939 1988 2061 2321
1 pull-out larder unit
4 baskets
Wire basket finish anthracite grey
Matching accessories:
Electrically assisted opening ZAZ 18 Order
Orgaset ZI 3011 AG and ZI 3012 AG
Tall unit for provisions SA 30 156 A 1701 1799 1872 1914 1956 2072 2107 2231 2452
SA 45 156 A 1761 1850 1922 1965 2013 2131 2184 2301 2738
1 pull-out larder unit dowelled
with cushioned opening and closure
4 baskets
Arena shelf finish anthracite grey
Matching accessories:
Electrically assisted opening ZAZ 18 Order
Orgaset ZI 3011 AG and ZI 3012 AG
Tall unit for provisions D SA 30 156 DA 1701 1799 1872 1914 2557 - - 2231 2452
D SA 45 156 DA 1761 1850 1922 1965 2666 - - 2301 2738
same as above, but
1 pull-out larder unit
4.70
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for provisions SA 30 156 1 A 1703 1780 1850 1907 1974 2075 2124 2197 2450
SA 45 156 1 A 1758 1834 1905 1970 2039 2155 2204 2276 2871
1 pull-out larder unit dowelled
with cushioned opening and closure
4 baskets
Arena shelf finish anthracite grey
Matching accessories:
Electrically assisted opening ZAZ 18 Order
Orgaset ZI 3011 AG and ZI 3012 AG
Tall unit for provisions SIA 30 156 1627 1719 1795 1837 1878 1997 2033 2156 2382
SIA 45 156 1671 1762 1834 1877 1926 2043 2098 2215 2649
2 hinged doors SIA 50 156 1686 1780 1850 1893 1944 2070 2127 2237 2746
5 interior deep drawers
SIA 60 156 1723 1809 1884 1937 1993 2103 2176 2282 2927
Must not be placed directly alongside
the wall.
Tall unit for provisions D SIA 30 156 D 1627 1719 1795 1837 2479 - - 2156 2382
D SIA 45 156 D 1671 1762 1834 1877 2579 - - 2215 2649
same as above, but SIA 50 156 D 1686 1780 1850 1893 2613 - - 2237 2746
1 full-height hinged door D
D SIA 60 156 D 1723 1809 1884 1937 2697 - - 2282 2927
Only available in ALNOPLAN, ALNODUR,
ALNOFINE, ALNOSUND, ALNOSIGN, ALNO-
GRAND, ALNOCLASS, ALNOSTRUCT.
Corner tall unit SEKL 110 156 A 2416 2508 2581 2622 2671 2789 2844 2961 3359
with 45 cm door
1 door (dowelled) SEKL 115 156 A 2498 2592 2662 2705 2756 2882 2939 3049 3517
4 fully pivotable height adjustable with 50 cm door
carousel shelves LeMans
Arena shelf finish anthracite grey SEKL 125 156 A 2617 2705 2780 2833 2888 2999 3071 3177 3778
with 60 cm door
carcase width 1000 mm, without corner
infill panel
Corner infill panel SEBE 156 78 H 293 348 425 533 566 658 697 822 930
Finish in door material
consists of: 780 mm high corner panel
and 650 mm wide smooth front panel for
height offset of 1560 on 780 mm
planning dimensions 650 x 650 mm
4.71
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Corner infill panel SEBE 156 20 78 HV 321 408 494 605 668 786 812 902 1091
Finish in door material
variable corner infill panel mitred and
front panel
for height adjustment from 1560 to
780 mm, planning dimension
620 - 740 mm per side
Corner infill panel for tall units SEBE 65 156 255 266 300 354 372 421 456 527 587
for corner tall unit
fixed size corner infill mitred
planning dimensions 650 x 650 mm
Corner infill panel for tall units SEBE 20 156 V 390 409 425 447 462 520 541 563 695
Finish in door material
variable corner infill panel mitred
Dimensions: 620 - 740 mm per side piece
Tall unit for built-in appliance SU 88 2A 156 1055 1149 1217 1299 1382 1563 1652 1727 2412
Niche height 878 mm
1 hinged appliance door
2 deep drawers
1 worktop ventilation grill
Tall unit for built-in appliance SU 102 A 156 873 964 1017 1094 1176 1316 1420 1516 2007
Niche height 1025 mm
1 hinged appliance door
1 deep drawer
1 worktop ventilation grill
4.72
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 122 156 766 853 927 980 1035 1145 1218 1324 2016
Niche height 1225 mm
1 hinged appliance door, dowelled
1 worktop ventilation grill
Tall unit for built-in appliance SU 122 A 156 874 959 1014 1090 1207 1359 1511 1553 2172
Niche height 1225 mm
1 hinged appliance door
1 deep drawer
1 worktop ventilation grill
Tall unit for built-in appliance SU 122 2TA 156 941 1032 1103 1184 1269 1448 1536 1613 2303
Niche height 1225 mm
2 hinged appliance doors
1 deep drawer
1 worktop ventilation grill
Tall unit for built-in appliance SU 152 156 768 855 929 982 1037 1149 1221 1327 2021
niche height 1400 - 1528 mm
1 hinged appliance door, dowelled
1 worktop ventilation grill
Tall unit for built-in appliance D SU 152 156 D 768 855 929 982 1741 - - 1327 2021
same as above, but
1 full-height hinged door
Tall unit for built-in appliance SU 145 2T 156 745 832 887 965 1048 1185 1289 1386 1885
niche height 1450 mm
2 hinged appliance doors
1 worktop ventilation grill
4.73
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 145 2T 156 1 745 821 895 972 1048 1169 1228 1317 1991
niche height 1450 mm
2 hinged appliance doors
1 worktop ventilation grill
Tall unit for appliances SUB 88 156 673 733 775 831 887 975 1016 1068 1559
Niche height
upper 585 - 590 mm
lower 878 mm
1 open niche
1 hinged appliance door
1 worktop ventilation grill
Tall unit for appliances SUM 102 156 660 730 769 822 879 951 1011 1021 1386
Niche height
at top 450 mm
at bottom 1025 mm
1 open niche
1 hinged appliance door
1 worktop ventilation grill
Tall unit for built-in appliance SUMK 3A 156 1137 1210 1262 1329 1392 1586 1698 1762 2420
niche height 334 - 365 mm
1 open niche
3 deep drawers
Tall unit for built-in appliance SUM 3A 156 1171 1242 1297 1372 1450 1669 1763 1824 2560
niche height 380 - 450 mm
1 open niche
3 deep drawers
Tall unit for built-in appliance SUB 156 699 759 801 857 914 1001 1041 1093 1582
niche height 585 - 590 mm
1 open niche
1 hinged door
2 adjustable shelves
4.74
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SUB S 156 845 902 946 999 1055 1156 1200 1265 1841
niche height 585 - 590 mm
1 open niche
1 drawer
1 hinged door
2 adjustable shelves
Tall unit for built-in appliance SUB 3A 156 1133 1193 1243 1306 1377 1574 1645 1690 2251
niche height 585 - 590 mm
1 open niche
3 deep drawers
Tall unit for appliances SUMKB SA 156 954 996 1022 1076 1134 1260 1307 1344 1871
Niche height
upper 334 - 409 mm
lower 585 - 595 mm
2 open niches
1 drawer
1 deep drawer
Tall unit for appliances SUMKB 2A 156 978 1021 1059 1112 1178 1340 1378 1410 1910
Niche height
upper 334 - 409 mm
lower 585 - 595 mm
2 open niches
2 deep drawers
Tall unit for appliances SUMB A 156 786 825 853 901 953 1078 1124 1161 1702
Niche height
upper 450 mm
lower 585 - 595 mm
2 open niches
1 deep drawer
4.75
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SULB SA 156 1302 1360 1398 1462 1526 1687 1766 1816 2394
for free standing microwave D SULB SA 156 1302 1360 1398 1462 1526 - - 1816 2394
max. 495 mm wide, 330 mm high behind
lift-up door
niche height 585 - 595 mm
1 lift-up door
1 open niche
1 drawer
1 deep drawer
Tall unit for appliances SULB 2A 156 1326 1385 1435 1498 1570 1767 1837 1882 2433
for free standing microwave D SULB 2A 156 D 1326 1385 1435 1498 1570 - - 1882 2433
max. 495 mm wide, 330 mm high behind
lift-up door
niche height 585 - 595 mm
1 lift-up door
1 open niche
2 deep drawers
Infill panel for tall units SBF 15 156 201 214 230 247 263 301 317 338 399
Finish in continuous door material
fitted between wall and carcase
In ALNOART, ALNOCERA,
ALNOSATINA and ALNOVETRINA
door width 75 mm,
adjustment range in
carcase finish 77 - 150 mm.
Other front widths (at least 50 mm)
available with MPS 1 (apart from ALNO-
ART) on request.
4.76
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Corner infill panel for tall units SEBF 20 156 V 403 422 441 458 477 539 556 576 709
Finish in continuous door material
For variable planning dimensions
for 90° corner solution
Min. dimension 50 mm per side.
max. 180 mm on carcase front edge per
leg
Corner infill panel for tall units SEBF 135 156 426 448 463 482 501 564 580 603 735
Finish in door material
for 135° corner solution
1 side closed
For planning dimensions 259 x 259 mm
Side cladding RBS 156 598 657 710 768 1409 - 1623 1650 1804
Finish in door material
for mounting on the carcase side
50 mm wide
for carcase depth 560 mm
Height- and depth-variable side RBSS V 776 850 924 996 1900 - - 2329 2357
panelling
Finish in door material
for mounting on the carcase side
Height variable from 777 to 1946 mm
50 mm wide
Depth variable from 100 to 732 mm
4.77
high-gloss lacquer
Item
carcase height 1560 mm
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
carcase depth 580 mm
width mm
Laminate
universal
veneer/
hinge
finish
Unit without plinth
Tall shelf unit 300 SR 30 156 1 561 2323 783 940 1445 2243 - -
370 mm deep variable in width SR 00 156 1 V 720 2675 1008 1210 1665 2494 - -
4 adjustable shelves from 150 to 600 mm
For colours and versions,
refer to colour matrix carcase
Tall end shelf unit 300 SRA 30 156 L/R 741 2635 1024 1229 1638 2583 - -
580 mm deep
4 fixed shelves
Tall end shelf unit 300 SRE 30 156 L/R 565 2397 850 1020 1463 2408 - -
580 mm deep
4 fixed shelves
4.78
high-gloss lacquer
Item
carcase height 1560 mm
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Unit without plinth
Infill panel for tall units 150 SBK 15 156 99 414 122 - 214 342 - -
Finish in carcase material
flush with carcase
fitted between wall and carcase
Infill panel for tall units 150 SBT 15 156 108 459 134 - 237 375 - -
Finish in carcase material for depth
adjustment between carcase and wall
4.79
4.80
A78
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit S 30 130 609 676 714 755 817 906 1002 1016 1226
S 45 130 642 709 750 807 876 974 1075 1110 1459
1 hinged door S 50 130 649 717 757 819 897 989 1104 1135 1530
3 adjustable shelves
S 60 130 674 744 782 843 937 1031 1168 1201 1682
410 S 30 130 4 602 669 706 748 809 899 995 1008 1218
410 S 45 130 4 633 702 743 800 869 967 1068 1103 1451
410 S 50 130 4 642 709 750 811 889 981 1097 1128 1523
410 S 60 130 4 666 734 774 833 929 1023 1159 1192 1674
Tall unit for broom SB 60 130 789 858 898 957 1053 1146 1282 1316 1791
1 hinged door
1 hook for brooms
1 holder for vacuum cleaner hose
1 hook rail
2 runners for adjustable wire baskets
3 wire baskets
Tall unit for provisions SA 30 130 AK 1491 1560 1596 1638 1700 1788 1884 1898 2064
1 pull-out larder unit
3 baskets
Wire basket finish anthracite grey
Matching accessories:
Electrically assisted opening ZAZ 18 Order
Orgaset ZI 3011 AG and ZI 3012 AG
Tall unit for provisions SA 30 130 A 1610 1678 1715 1756 1819 1906 2002 2017 2177
SA 45 130 A 1659 1726 1767 1824 1894 1990 2092 2128 2426
same as above, but
Arena shelf finish anthracite grey
1296
Tall unit for provisions SIA 30 130 1368 1434 1472 1513 1575 1665 1760 1774 1946
SIA 45 130 1398 1467 1507 1565 1633 1731 1832 1868 2179
1 hinged door SIA 50 130 1406 1474 1515 1576 1653 1746 1860 1893 2250
4 interior drawers
SIA 60 130 1432 1501 1541 1600 1696 1790 1926 1958 2402
Must not be placed directly alongside
the wall.
Corner tall unit SEKL 110 130 A 2324 2392 2433 2490 2559 2657 2758 2793 3057
with 45 cm door
1 hinged door SEKL 115 130 A 2404 2471 2512 2573 2651 2744 2859 2891 3198
4 fully pivotable height adjustable with 50 cm door
carousel shelves LeMans
Arena shelf finish anthracite grey SEKL 125 130 A 2509 2579 2617 2678 2773 2866 3003 3036 3425
with 60 cm door
carcase width 1000 mm, without corner
infill panel
Matching accessories:
self-closing ZID 29 AG
Corner infill panel SEBE 130 78 H 273 316 385 482 513 - - 742 819
Finish in door material
consists of: 780 mm high corner panel
and 650 mm wide smooth front panel for
height offset of 1300 on 780 mm
planning dimensions 650 x 650 mm
4.81
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Corner infill panel SEBE 130 20 78 HV 300 376 452 550 615 721 746 822 982
Finish in door material
variable corner infill panel mitred and
front panel
for height adjustment from 1300 to
780 mm, planning dimension
620 - 740 mm per side
Corner infill panel SEBE 65 130 221 234 268 321 338 387 421 490 538
for corner tall unit
fixed size corner infill mitred
planning dimensions 650 x 650 mm
Corner infill panel for tall units SEBE 20 130 V 385 403 421 440 458 515 537 555 667
Finish in door material
variable corner infill panel mitred
Dimensions: 620 - 740 mm per side piece
Tall unit for built-in appliance SU 88 A 130 836 915 968 1033 1095 1218 1291 1356 1905
Niche height 878 mm
1 hinged appliance door
1 deep drawer
1 worktop ventilation grill
Tall unit for built-in appliance SU 102 A 130 849 934 987 1058 1136 1267 1343 1362 1866
Niche height 1025 mm
1 hinged appliance door
1 deep drawer
1 worktop ventilation grill
Tall unit for built-in appliance SU 122 130 634 704 743 802 898 990 1126 1160 1641
Niche height 1225 mm
1 hinged appliance door
1 worktop ventilation grill
Tall unit for built-in appliance SU 122 2T 130 716 792 847 911 974 1095 1168 1234 1789
Niche height 1225 mm
2 hinged appliance doors
1 worktop ventilation grill
4.82
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SUMK 130 667 727 769 825 881 969 1009 1061 1551
niche height 334 - 365 mm
1 open niche
1 hinged door
2 adjustable shelves
Tall unit for built-in appliance SUMK S 2A 130 1103 1161 1200 1265 1327 1487 1568 1618 2207
niche height 334 - 365 mm
1 open niche
1 drawer
2 deep drawers
Tall unit for built-in appliance SUM S2A 130 1101 1153 1190 1253 1320 1481 1541 1581 2123
niche height 380 - 450 mm
1 open niche
1 drawer
2 deep drawers
Tall unit for built-in appliance SUM 2A 130 922 972 1008 1056 1102 1239 1315 1359 1832
niche height 380 - 450 mm
1 open niche
2 deep drawers
Tall unit for built-in appliance SUM 130 650 699 741 776 816 894 932 992 1454
niche height 380 - 450 mm
1 open niche
1 hinged door
2 adjustable shelves
Tall unit for built-in appliance SUB 130 639 665 705 746 787 867 893 941 1354
niche height 585 - 590 mm
1 open niche
1 hinged door
1 adjustable shelf
4.83
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SUB 2SA 130 1072 1117 1141 1204 1267 1393 1441 1477 1998
niche height 585 - 590 mm
1 open niche
2 drawers
1 deep drawer
Tall unit for built-in appliance SUB 2A 130 920 964 999 1044 1094 1232 1287 1323 1748
niche height 585 - 590 mm
1 open niche
2 deep drawers
Tall unit for appliances SUMKB A 130 756 782 806 843 886 990 1012 1034 1400
Niche height
upper 334 - 409 mm
lower 585 - 595 mm
2 open niches
1 deep drawer
The aperture size may be adjusted with
infill panel in door material.
Tall unit for appliances SUMB S 130 725 745 755 791 831 899 909 927 1270
Niche height
upper 450 mm
lower 585 - 595 mm
2 open niches
1 drawer
Support base for integrated high level SUG 2A 130 714 746 775 810 852 969 1001 1019 1277
dishwasher
1 drawer 256 mm high reduced 150 mm
from the back
1 deep drawer reduced 150 mm from
the back
4.84
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Support base for integrated high level SUG A 117 556 578 594 613 630 687 723 743 910
dishwasher
1 deep drawer reduced 150 mm from
the back
Support base and appliance result in a
height of 1170 mm.
Support base for integrated high level SUG A 104 549 564 579 596 617 675 692 701 821
dishwasher
1 deep drawer
reduced 150 mm from the back
Support base and appliance result in a
height of 1040 mm.
Front panel GSBH 60 249 286 321 366 408 499 515 546 939
For high level integrated dishwashers
1 front panel without handle drilling
with folding panel below
Support base for integrated high level SUG 2A 130 X 799 836 870 913 967 1107 1141 1167 1547
dishwasher
1 drawer 256 mm high
reduced 150 mm from the back
1 drip tray
1 deep drawer reduced 150 mm from
the back
Support base for integrated high level SUG A 117 X 606 628 644 663 680 737 773 793 958
dishwasher
1 deep drawer
reduced 150 mm from the back
1 drip tray
Support base and appliance result in a
height of 1170 mm.
4.85
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Support base for integrated high level SUG A 104 X 600 615 630 647 668 726 743 752 868
dishwasher
1 deep drawer
reduced 150 mm from the back
1 drip tray
Support base and appliance result in a
height of 1040 mm.
Front panel GSBV 60 1 242 287 324 354 383 439 476 531 895
For high level fully integrated dishwasher
1 front panel with handle drilling
1 fixed interior panel
Front panel GSB 60 X 134 154 191 223 257 315 337 380 700
for integrated dishwashers
1 front panel without handle drilling
Front panel GSBV 60 X 156 201 239 268 297 353 391 447 814
for fully integrated dishwashers
1 front panel with handle drilling
Dresser unit AU 117 612 701 772 847 865 1012 1071 1148 1611
1 hinged door
3 adjustable shelves
carcase height 1170 mm
as dresser unit above dishwasher
No visible sides!
4.86
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Dresser unit for built-in appliance AUB 117 520 529 562 593 642 702 718 760 1163
niche height 585 - 595 mm
1 hinged door
1 adjustable shelf
1 open niche
carcase height 1170 mm
as dresser unit above dishwasher
Dresser unit for built-in appliance AUM 117 529 556 596 636 679 758 783 831 1250
Niche height 450 mm
1 hinged door
1 adjustable shelf
1 open niche
carcase height 1170 mm
as dresser unit above dishwasher
Dresser unit AU 104 590 689 757 826 836 992 1041 1102 1518
1 hinged door
3 adjustable shelves
carcase height 1040 mm
as dresser unit above dishwasher
No visible sides!
Dresser unit for built-in appliance AUB 104 499 516 546 572 613 683 689 713 1070
niche height 585 - 595 mm
1 hinged door
1 open niche
carcase height 1040 mm
as dresser unit above dishwasher
4.87
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Dresser unit for built-in appliance AUM 104 507 541 578 613 648 735 749 780 1152
Niche height 450 mm
1 hinged door
1 adjustable shelf
1 open niche
carcase height 1040 mm
as dresser unit above dishwasher
Dresser unit AU 91 559 652 702 766 769 919 992 1046 1391
1 hinged door
2 adjustable shelves
carcase height 910 mm
as dresser unit above dishwasher
No visible sides!
Dresser unit for built-in appliance AUB 91 495 506 519 539 574 635 666 684 971
niche height 585 - 595 mm
1 flap door
1 open niche
carcase height 910 mm
as dresser unit above dishwasher
The aperture size may be adjusted with
infill panel in door material.
No visible sides!
Dresser unit AUM 91 476 504 524 553 581 661 700 725 1025
Niche height 450 mm
1 hinged door
1 open niche
carcase height 910 mm
as dresser unit above dishwasher
4.88
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Dresser unit AU 65 479 565 608 661 681 751 799 840 1008
1 hinged door
1 adjustable shelf
carcase height 650 mm
as dresser unit above dishwasher
No visible sides!
Dresser unit for built-in appliance AUB 65 362 367 371 380 393 415 418 424 533
niche height 585 - 595 mm
1 open niche
carcase height 650 mm
as dresser unit above dishwasher
Dresser unit AU 52 452 521 556 600 617 678 716 750 905
1 hinged door
1 adjustable shelf
carcase height 520 mm
as dresser unit above dishwasher
No visible sides!
Dresser unit AUM 52 344 349 353 363 374 397 400 406 517
Niche height 450 mm
1 open niche
carcase height 520 mm
as dresser unit above dishwasher
4.89
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Infill panel for tall units SBF 15 130 193 206 221 236 249 283 299 313 367
Finish in door material
fitted between wall and carcase
In ALNOART, ALNOCERA,
ALNOSATINA and ALNOVETRINA
door width 75 mm,
adjustment range in
carcase finish 77 - 150 mm.
Other front widths (at least 50 mm)
available with MPS 1 (apart from ALNO-
ART) on request.
Corner infill panel for tall units SEBF 20 130 V 400 419 437 454 473 533 550 571 683
Finish in continuous door material
For variable planning dimensions
for 90° corner solution
Min. dimension 50 mm per side.
max. 180 mm on carcase front edge per
leg
Corner infill panel for tall units SEBF 135 130 422 441 458 477 499 556 576 595 708
Finish in door material
for 135° corner solution
1 side closed
For planning dimensions 259 x 259 mm
Side cladding RBS 130 572 621 670 720 1263 - 1452 1470 1519
Finish in door material
for mounting on the carcase side
50 mm wide
for carcase depth 560 mm
Side cladding RBS 130 R 675 725 774 823 1352 - 1557 1597 1822
same as above, but
for room divider and carcase depth
560 mm
Height- and depth-variable side RBSS V 776 850 924 996 1900 - - 2329 2357
panelling
Finish in door material
for mounting on the carcase side
Height variable from 777 to 1946 mm
50 mm wide
Depth variable from 100 to 732 mm
4.90
high-gloss lacquer
Item
carcase height 1300 mm
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Unit without plinth
Tall shelf unit 300 SR 30 130 1 518 2108 726 871 1312 2071 - -
variable in width SR 00 130 1 V 676 2456 950 1140 1529 2316 - -
370 mm deep from 150 to 600 mm
3 adjustable shelves
Tall end shelf unit 300 SRA 30 130 L/R 691 2518 968 1162 1568 2468 - -
580 mm deep
3 fixed shelves
Tall end shelf unit 300 SRE 30 130 L/R 544 2323 821 985 1421 2261 - -
580 mm deep
3 fixed shelves
Infill panel for tall units 150 SBK 15 130 94 408 120 - 211 337 - -
Finish in carcase material
flush with carcase
fitted between wall and carcase
Infill panel for tall units 150 SBT 15 130 104 449 132 - 233 371 - -
Finish in carcase material for depth
adjustment between carcase and wall
4.91
4.92
à
Tall units 2210 mm
A72
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit S 30 221 M 929 1062 1141 1229 1317 1472 1552 1707 2038
S 45 221 M 987 1122 1201 1302 1407 1562 1663 1811 2335
1 flap door S 50 221 M 1007 1143 1231 1326 1430 1622 1701 1853 2459
2 fixed shelves
1 hinged door S 60 221 M 1062 1186 1277 1378 1491 1685 1803 1943 2736
3 adjustable shelves
1 hinged door
1 adjustable shelf
Tall unit for provisions S2A 60 221 M 1326 1450 1541 1642 1755 1949 2067 2207 3000
1 flap door
1 hinged door
2 fixed shelves
3 adjustable shelves
2 deep drawers
Tall unit for broom SB 30 221 M 1069 1203 1281 1369 1457 1612 1693 1847 2172
SB 45 221 M 1126 1262 1339 1441 1545 1700 1802 1950 2467
1 flap door SB 50 221 M 1146 1283 1370 1466 1570 1761 1841 1993 2591
1 door (dowelled)
2 fixed shelves SB 60 221 M 1201 1325 1416 1516 1630 1823 1941 2082 2867
1 hook for brooms
1 holder for vacuum cleaner hose
1 hook rail
2 runners for adjustable wire baskets
3 wire baskets
Tall unit for provisions SA 30 221 MAK 1885 2020 2098 2186 2274 2429 2507 2661 2946
1 flap door
1 pull-out larder unit dowelled
with cushioned opening and closure
5 baskets Wire basket finish anthracite
grey
1 fixed shelf
Matching accessories:
Electrically assisted opening ZAZ 18 Order
Orgaset ZI 3011 AG and ZI 3012 AG
Tall unit for provisions SA 30 221 MA 2085 2220 2298 2386 2475 2629 2708 2862 3135
SA 45 221 MA 2166 2302 2381 2480 2585 2740 2840 2990 3457
same as above, but
Arena shelf finish anthracite grey
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 4.93
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for provisions SIA 30 221 M 1847 1981 2059 2147 2235 2390 2471 2625 2911
SIA 45 221 M 1898 2033 2111 2212 2317 2472 2573 2721 3201
1 flap door SIA 50 221 M 1921 2056 2144 2239 2344 2535 2615 2767 3326
2 hinged doors
2 fixed shelves SIA 60 221 M 1974 2099 2190 2290 2404 2597 2715 2856 3603
5 interior deep drawers
Tall unit for provisions ST 60 221 MA 2019 2143 2234 2335 2448 2642 2760 2900 3693
1 flap door
1 door (dowelled)
1 fixed shelf
1 swing-out mechanism with
4 fixed baskets
1 Orgaset
5 adjustable shelves shortened in depth
Load-bearing capacity of baskets in the
door: 4 kg each
Tall unit for provisions SM 60 221 MA 3148 3272 3363 3464 3577 3771 3889 4029 4718
1 flap door
1 door (dowelled)
1 fixed shelf
1 swing-out mechanism with
4 fixed baskets
1 Orgaset
1 swing-out mechanism with
5 adjustable baskets
Corner storage unit SE 120 221 M 2510 2638 2727 2832 2945 3139 3258 3399 4123
256
2 side panels 585 mm deep for tall units
+ plinth height
1231 available in all panel colours
Carcase interior colour white or anthracite
grey
1 top shelf 25 mm thick
4 shelves 25 mm thick
711 1 sliding door with sliding door fitting and
plinth element
Handle vertically over the complete front
height as opening assistance in stainless
steel- effect or aluminium black
Planning dimension 1200 x 600 mm
4.94 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 88 221 M 960 1086 1193 1291 1386 1570 1653 1777 2751
Niche height 878 mm
1 hinged door
1 adjustable shelf
1 appliance door
1 hinged door
1 adjustable shelf
Tall unit for built-in appliance SU 88 ISIA 221 M 1612 1738 1845 1943 2038 2222 2305 2429 3403
Niche height 878 mm
1 hinged door
1 adjustable shelf
1 appliance door
1 hinged door
1 internal drawer
2 interior deep drawers
Tall unit for built-in appliance SU 88 2A 221 M 1223 1350 1451 1562 1663 1905 2025 2134 3120
Niche height 878 mm
1 hinged door
1 adjustable shelf
1 hinged appliance door
2 deep drawers
Servodrive assisted opening is available
for appliance hinged door at
MPS SERVO KS surcharge.
Tall unit for built-in appliance SU 88 S2A 221 M 1396 1527 1629 1753 1876 2143 2246 2351 3405
Niche height 878 mm
1 hinged door
1 adjustable shelf
1 appliance door
1 drawer
2 deep drawers
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 4.95
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 102 221 M 962 1081 1187 1296 1408 1598 1691 1769 2697
Niche height 1025 mm
1 flap door
1 appliance door
1 hinged door
1 adjustable shelf
Tall unit for built-in appliance SU 102 2A 221 M 1234 1370 1472 1586 1703 1954 2077 2140 3081
Niche height 1025 mm
1 flap door
1 appliance door
2 deep drawers
Tall unit for built-in appliance SU 122 A 221 M 1038 1158 1245 1349 1484 1698 1880 1957 2877
Niche height 1225 mm
1 hinged door
1 adjustable shelf
1 hinged appliance door, dowelled
1 deep drawer
Servodrive assisted opening is available
for appliance hinged door at
MPS SERVO KS surcharge.
Tall unit for built-in appliance SU 122 2TA221M 1115 1240 1344 1452 1556 1797 1915 2026 3016
Niche height 1225 mm
1 hinged door
1 adjustable shelf
2 hinged appliance doors
1 deep drawer
4.96 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 140 221 M 968 1076 1185 1269 1355 1520 1615 1762 2754
Niche height 1400 mm
1 hinged door
2 adjustable shelves
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 145 2T 221 933 1042 1133 1239 1353 1545 1670 1809 2608
niche height 1450 mm
1 hinged door
1 adjustable shelf
2 hinged appliance doors
Tall unit for built-in appliance SU 1452T 2212M 930 1055 1157 1266 1377 1587 1676 1802 2627
niche height 1450 mm
1 hinged door
1 adjustable shelf
2 hinged appliance doors
Tall unit for built-in appliance SU 159 221 M 947 1074 1180 1278 1374 1558 1640 1764 2740
niche height 1590 mm
1 hinged door
1 adjustable shelf
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 159 2T 221 M 933 1060 1167 1265 1360 1543 1627 1750 2725
same as above, but
2 hinged appliance doors
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 4.97
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 178 221 M 837 945 1035 1143 1258 1450 1573 1714 2517
Niche height 1780 mm
1 flap door
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 178 2T 221 M 911 1044 1137 1234 1336 1518 1649 1732 2640
same as above, but
2 hinged appliance doors
Tall unit for built-in appliance SU 178 2T 221 911 1044 1137 1234 1336 1518 1649 1732 2640
niche height 1585 - 1788 mm
2 hinged appliance doors
Tall unit for appliances SU 88 72 221 947 1074 1180 1278 1374 1558 1640 1764 2740
Niche height
upper 878 mm
lower 716 mm
1 hinged door
1 adjustable shelf
2 hinged appliance doors
Tall unit for appliances SU 88 88 221 M 912 1042 1134 1244 1352 1536 1645 1756 2690
Niche height
upper 878 mm
lower 878 mm
1 flap door
2 hinged appliance doors
4.98 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SUB 88 221 878 960 1036 1123 1210 1353 1415 1509 2298
Niche height D SUB 88 221 D 878 960 1036 1123 1210 - - 1509 2298
upper 585 - 595 mm
lower 878 mm
1 hinged door
1 adjustable shelf
1 open niche
1 appliance door
Tall unit for appliances SUM 221 929 1032 1111 1193 1276 1418 1494 1598 2435
niche height 380 - 450 mm D SUM 221 D 929 1032 1111 1193 1276 - - 1598 2435
1 hinged door
2 adjustable shelves
1 open niche
1 hinged door
2 adjustable shelves
Tall unit for appliances SUB 221 M 917 999 1076 1163 1248 1391 1454 1547 2336
niche height 585 - 595 mm D SUB 221 MD 881 962 1039 1125 1215 - - 1512 2301
1 hinged door
2 adjustable shelves
1 fixed panel
1 open niche
1 hinged door
1 adjustable shelf
Tall unit for appliances SUB ISIA 221 M 1569 1651 1728 1815 1900 2043 2106 2199 2988
niche height 585 - 595 mm D SUB ISIA 221 MD 1533 1614 1691 1777 1867 - - 2164 2953
1 hinged door
2 adjustable shelves
1 fixed panel
1 open niche
1 hinged door
1 internal drawer
2 interior deep drawers
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 4.99
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SUB 2A 221 M 1181 1279 1352 1443 1537 1739 1831 1910 2712
niche height 585 - 595 mm D SUB 2A 221 MD 1181 1279 1352 1443 1537 - - 1910 2712
1 hinged door
2 adjustable shelves
1 fixed panel
1 open niche
2 deep drawers
Tall unit for appliances SUB S2A 221 1M 1371 1467 1540 1629 1723 1938 2033 2126 3013
niche height 585 - 595 mm D SUB S2A 221 1MD 1371 1467 1540 1629 1723 - - 2126 3013
1 hinged door
2 adjustable shelves
1 fixed panel
1 open niche
1 drawer
2 deep drawers
Tall unit for appliances SUMKB 221 M 912 972 1050 1124 1202 1366 1406 1485 2275
Niche height D SUMKB 221 MD 912 972 1050 1124 1202 - - 1485 2275
upper 334-365 mm
lower 585-595 mm
1 hinged door
1 adjustable shelf
2 open niches
1 hinged door
1 adjustable shelf
Tall unit for appliances SUMKB 2A 221 M 1197 1261 1334 1418 1514 1730 1790 1865 2665
Niche height D SUMKB 2A 221 MD 1197 1261 1334 1418 1514 - - 1865 2665
upper 334-365 mm
lower 585-595 mm
1 hinged door
1 adjustable shelf
2 open niches
2 deep drawers
4.100 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SUMB 221 M 917 999 1076 1163 1248 1391 1454 1547 2336
Niche height D SUMB 221 MD 881 962 1039 1125 1215 - - 1512 2301
top 380 - 450 mm
bottom 585 - 595 mm
1 hinged door
1 adjustable shelf
2 open niches
1 hinged door
1 adjustable shelf
Tall unit for appliances SUMB SA 221 M 1163 1235 1305 1384 1472 1697 1746 1803 2556
Niche height D SUMB SA 221 MD 1163 1235 1305 1384 1472 - - 1803 2556
top 380 - 450 mm
bottom 585 - 595 mm
1 hinged door
1 adjustable shelf
2 open niches
1 drawer
1 deep drawer
Tall unit for appliances SUMB 2A 221 M 1187 1259 1329 1408 1496 1721 1770 1827 2580
Niche height D SUMB 2A 221 MD 1187 1259 1329 1408 1496 - - 1827 2580
top 380 - 450 mm
bottom 585 - 595 mm
1 hinged door
1 adjustable shelf
2 open niches
2 deep drawers
Tall unit for appliances SULB 221 M 1253 1329 1418 1502 1585 1784 1856 1949 2788
for free standing microwave D SULB 221 MD 1253 1329 1418 1502 1585 - - 1949 2788
max. 495 mm wide, 330 mm high behind
lift-up door
niche height 585 - 595 mm
1 hinged door
1 adjustable shelf
1 lift-up door
1 fixed panel
1 open niche
1 hinged door
1 adjustable shelf
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 4.101
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SULB 2A 221 M 1532 1626 1710 1799 1889 2147 2249 2328 3179
for free standing microwave D SULB 2A 221 MD 1532 1626 1710 1799 1889 - - 2328 3179
max. 495 mm wide, 330 mm high behind
lift-up door
niche height 585 - 595 mm
1 hinged door
1 adjustable shelf
1 lift-up door
1 fixed panel
1 open niche
2 deep drawers
4.102 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Infill panel for tall units SBF 15 221 M 231 248 267 285 305 347 369 389 461
Finish in continuous door material
split above 715 mm for the following
ranges: Fronts with horizontal graining in
ALNOPLAN.
fitted between wall and carcase
In ALNOART, ALNOCERA,
ALNOSATINA and ALNOVETRINA
door width 75 mm,
adjustment range in
carcase finish 77 - 150 mm.
Other front widths (at least 50 mm)
available with MPS 1 (apart from ALNO-
ART) on request.
Corner infill panel for tall units SEBF 20 221 M V 451 470 487 506 526 - - 627 780
Finish in continuous door material
split above 715 mm for the following
ranges: Fronts with horizontal graining in
ALNOPLAN.
For variable planning dimensions
for 90° corner solution
Min. dimension 50 mm per side.
max. 180 mm on carcase front edge per
leg
Side cladding RBS 221 M 783 863 936 1017 1928 - 2249 2273 2326
Finish in continuous door material
split above 715 mm for the following
ranges: Fronts with horizontal graining in
ALNOPLAN.
for mounting on the carcase side
50 mm wide
for carcase depth 560 mm
Height- and depth-variable side RBSS V 776 850 924 996 1900 - - 2329 2357
panelling
Finish in door material
for mounting on the carcase side
Height variable from 777 to 1946 mm
50 mm wide
Depth variable from 100 to 732 mm
4.103
high-gloss lacquer
Item
carcase height 2210 mm
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
carcase depth 580 mm
width mm
Laminate
universal
veneer/
hinge
finish
Unit without plinth
Tall shelf unit 300 SR 30 221 1 668 2751 1148 1378 1638 2707 - -
370 mm deep variable width SR 00 221 V 937 3851 1419 1703 2046 3520 - -
5 adjustable shelves from 150 to 600 mm
For colours and versions,
refer to colour matrix carcase
Tall end shelf unit 300 SRA 30 221 L/R 864 3115 1208 1450 1937 3058 - -
580 mm deep
5 fixed shelves
Tall end shelf unit 300 SRE 30 221 L/R 658 2840 1004 1205 1733 2854 - -
580 mm deep
5 fixed shelves
4.104 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
high-gloss lacquer
Item
carcase height 2210 mm
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Unit without plinth
Infill panel for tall units 150 SBK 15 221 110 449 135 - 233 369 - -
Finish in carcase material
flush with carcase
fitted between wall and carcase
Infill panel for tall units 150 SBT 15 221 121 492 149 - 255 404 - -
Finish in carcase material
for depth adjustment between carcase
and wall
4.105
4.106
A72
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit S 30 208 M 814 926 1002 1065 1146 1295 1409 1484 1837
S 45 208 M 858 972 1049 1127 1221 1377 1506 1599 2196
2 hinged doors S 50 208 M 874 989 1065 1148 1251 1406 1549 1636 2316
2 adjustable shelves
1 hinged door S 60 208 M 918 1030 1107 1193 1317 1466 1637 1724 2559
1 adjustable shelf
Tall unit for provisions S2A 60 208 M 1182 1294 1371 1457 1581 1730 1901 1988 2823
1 hinged door
3 adjustable shelves
1 fixed shelf
2 deep drawers
Tall unit for broom SB 30 208 M 897 1009 1084 1148 1229 1378 1492 1568 1917
SB 45 208 M 939 1053 1129 1208 1302 1458 1586 1680 2274
1 hinged door SB 50 208 M 956 1071 1146 1229 1332 1487 1631 1719 2394
1 door (dowelled)
1 fixed shelf SB 60 208 M 996 1108 1184 1271 1394 1543 1716 1801 2633
1 hook for brooms
1 holder for vacuum cleaner hose
1 hook rail
2 runners for adjustable wire baskets
3 wire baskets
Tall unit for provisions SA 30 208 MAK 1676 1793 1866 1930 2012 2158 2272 2347 2657
1 pull-out larder unit dowelled
with cushioned opening and closure
5 baskets
Wire basket finish anthracite grey
1 fixed shelf
Matching accessories:
Electrically assisted opening ZAZ 18 Order
Orgaset ZI 3011 AG and ZI 3012 AG
Tall unit for provisions SA 30 208 MA 1877 1993 2066 2130 2212 2358 2471 2547 2847
SA 45 208 MA 1960 2073 2150 2229 2324 2478 2606 2700 3246
same as above, but
Arena shelf finish anthracite grey
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 4.107
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for provisions SIA 30 208 M 1732 1845 1921 1983 2066 2213 2328 2403 2710
SIA 45 208 M 1768 1881 1957 2036 2130 2286 2415 2508 3060
1 door (dowelled) SIA 50 208 M 1785 1900 1976 2058 2161 2317 2460 2548 3182
2 fixed shelves
1 hinged door SIA 60 208 M 1828 1941 2018 2103 2227 2376 2548 2634 3423
5 interior deep drawers
Tall unit for provisions ST 60 208 MA 1875 1987 2064 2150 2274 2423 2594 2681 3516
1 door (dowelled)
1 swing-out mechanism with
4 fixed baskets
1 Orgaset
5 adjustable shelves shortened in depth
Tall unit for provisions SM 60 208 MA 3024 3138 3214 3300 3423 3572 3744 3831 4560
1 door (dowelled)
1 adjustable shelf
1 swing-out mechanism with
4 fixed baskets
1 Orgaset
1 swing-out mechanism with
5 adjustable baskets
Corner storage unit SE 120 208 M 2434 2547 2624 2711 2834 2981 3153 3241 3996
2 side panels 585 mm deep for tall units
+ plinth height
available in all panel colours
Carcase interior colour white or anthracite
grey
1 top shelf 25 mm thick
4 shelves 25 mm thick
1 sliding door with sliding door fitting and
plinth element
Handle vertically over the complete front
height as opening assistance in stainless
steel- effect or aluminium black
Planning dimension 1200 x 600 mm
4.108 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 88 208 M 920 1039 1131 1223 1313 1490 1598 1719 2629
Niche height 878 mm
1 hinged door
1 appliance door
1 hinged door
1 adjustable shelf
Tall unit for built-in appliance SU 88 ISIA 208 M 1572 1691 1783 1875 1965 2142 2250 2371 3281
Niche height 878 mm
1 hinged door
1 appliance door
1 hinged door
1 internal drawer
2 interior deep drawers
Servodrive assisted opening is available
for appliance hinged door at
MPS SERVO KS surcharge.
Tall unit for built-in appliance SU 88 2A 208 M 1184 1305 1392 1495 1592 1828 1973 2078 3000
Niche height 878 mm
1 hinged door
1 appliance door
2 deep drawers
Tall unit for built-in appliance SU 88 S2A 208 M 1363 1485 1574 1692 1809 2071 2199 2300 3290
Niche height 878 mm
1 hinged door
1 appliance door
1 drawer
2 deep drawers
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 4.109
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 102 208 M 922 1033 1126 1228 1334 1519 1636 1710 2573
Niche height 1025 mm
1 hinged appliance door, dowelled
1 hinged door
1 adjustable shelf
Tall unit for built-in appliance SU 102 2A 208 M 1196 1325 1412 1520 1633 1877 2025 2084 2961
Niche height 1025 mm
1 hinged appliance door, dowelled
2 deep drawers
Tall unit for built-in appliance SU 122 A 208 M 1001 1112 1185 1282 1413 1621 1828 1901 2757
Niche height 1225 mm
1 hinged door
1 hinged appliance door, dowelled
1 deep drawer
Tall unit for built-in appliance SU 122 2TA208M 1049 1167 1256 1358 1456 1691 1834 1942 2870
Niche height 1225 mm
1 hinged door
2 hinged appliance doors
1 deep drawer
4.110 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 140 208 M 933 1020 1129 1218 1307 1475 1556 1694 2646
Niche height 1400 mm
1 hinged door
1 adjustable shelf
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 145 2T 208 925 1042 1130 1232 1339 1542 1655 1779 2537
niche height 1450 mm
1 hinged door
1 adjustable shelf
2 hinged appliance doors
Tall unit for built-in appliance SU 1452T 2082M 925 1042 1130 1232 1339 1542 1655 1779 2537
niche height 1450 mm
1 hinged door
2 hinged appliance doors
Tall unit for built-in appliance SU 159 208 M 896 1015 1107 1199 1289 1466 1574 1694 2606
niche height 1590 mm
1 hinged door
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 159 2T 208 M 896 1015 1107 1199 1289 1466 1574 1694 2606
same as above, but
2 hinged appliance doors
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 4.111
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 178 208 M 899 1001 1091 1197 1317 1512 1616 1747 2504
niche height 1790 mm
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 178 2T 208 M 820 932 1009 1095 1219 1368 1540 1626 2466
same as above, but
2 hinged appliance doors
Tall unit for built-in appliance SU 178 2T 208 8 932 1060 1153 1248 1356 1540 1651 1726 2589
Niche height 1580 mm
1 flap door
2 hinged appliance doors
Tall unit for appliances SU 88 72 208 907 1026 1119 1210 1301 1477 1585 1705 2616
Niche height
upper 878 mm
lower 716 mm
1 hinged door
2 hinged appliance doors
Tall unit for appliances SU 88 88 208 8 933 1058 1150 1259 1371 1558 1647 1750 2640
Niche height
upper 878 mm
lower 878 mm
1 flap door
2 hinged appliance doors
4.112 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SUB 88 208 868 957 1031 1113 1193 1345 1396 1474 2223
Niche height D SUB 88 208 D 868 957 1031 1113 1193 - - 1474 2223
upper 585 - 595 mm
lower 878 mm
1 hinged door
1 adjustable shelf
1 open niche
1 appliance door
Tall unit for built-in appliance SUM 208 901 982 1060 1148 1234 1378 1441 1535 2331
niche height 380 - 450 mm D SUM 208 D 901 982 1060 1148 1234 - - 1535 2331
1 hinged door
1 adjustable shelf
1 open niche
1 hinged door
2 adjustable shelves
Tall unit for built-in appliance SUB 208 M 901 971 1049 1116 1185 1320 1381 1483 2249
niche height 585 - 595 mm D SUB 208 MD 901 971 1049 1116 1185 - - 1483 2249
1 hinged door
1 adjustable shelf
1 fixed panel
1 open niche
1 hinged door
1 adjustable shelf
Tall unit for built-in appliance SUB ISIA 208 M 1553 1623 1701 1768 1837 1972 2033 2135 2901
niche height 585 - 595 mm D SUB ISIA 208 MD 1553 1623 1701 1768 1837 - - 2135 2901
1 hinged door
1 adjustable shelf
1 fixed panel
1 open niche
1 hinged door
1 internal drawer
2 interior deep drawers
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 4.113
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SUB 2A 208 M 1165 1252 1324 1396 1474 1668 1758 1847 2625
niche height 585 - 595 mm D SUB 2A 208 MD 1165 1252 1324 1396 1474 - - 1847 2625
1 hinged door
1 adjustable shelf
1 fixed panel
1 open niche
2 deep drawers
Tall unit for built-in appliance SUB S2A 208 1M 1344 1418 1491 1584 1682 1900 1982 2066 2910
niche height 585 - 595 mm D SUB S2A 208 1MD 1344 1418 1491 1584 1682 - - 2066 2910
1 hinged door
1 adjustable shelf
1 fixed panel
1 open niche
1 drawer
2 deep drawers
Tall unit for appliances SUMKB 208 M 901 969 1043 1113 1183 1358 1385 1449 2197
Niche height D SUMKB 208 MD 901 969 1043 1113 1183 - - 1449 2197
upper 334-365 mm
lower 585-595 mm
1 hinged door
1 adjustable shelf
2 open niches
1 hinged door
1 adjustable shelf
Tall unit for appliances SUMKB 2A 208 M 1189 1260 1331 1410 1499 1726 1775 1832 2591
Niche height D SUMKB 2A 208 MD 1189 1260 1331 1410 1499 - - 1832 2591
upper 334-365 mm
lower 585-595 mm
1 hinged door
1 adjustable shelf
2 open niches
2 deep drawers
4.114 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SUMB 208 M 901 971 1049 1116 1185 1320 1381 1483 2249
Niche height D SUMB 208 MD 901 971 1049 1116 1185 - - 1483 2249
top 380 - 450 mm
bottom 585 - 595 mm
1 hinged door
2 open niches
1 hinged door
1 adjustable shelf
Tall unit for appliances SUMB SA 208 M 1141 1228 1300 1372 1450 1644 1734 1823 2601
Niche height D SUMB SA 208 MD 1141 1228 1300 1372 1450 - - 1823 2601
top 380 - 450 mm
bottom 585 - 595 mm
1 hinged door
2 open niches
1 drawer
1 deep drawer
Tall unit for appliances SUMB 2A 208 M 1165 1252 1324 1396 1474 1668 1758 1847 2625
Niche height D SUMB 2A 208 MD 1165 1252 1324 1396 1474 - - 1847 2625
top 380 - 450 mm
bottom 585 - 595 mm
1 hinged door
2 open niches
2 deep drawers
Tall unit for appliances SULB 208 M 1212 1281 1356 1433 1511 1703 1800 1890 2664
for free standing microwave D SULB 208 MD 1212 1281 1356 1433 1511 - - 1890 2664
max. 495 mm wide, 330 mm high behind
lift-up door
niche height 585 - 595 mm
1 hinged door
1 lift-up door
1 fixed panel
1 open niche
1 hinged door
1 adjustable shelf
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 4.115
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SULB 2A 208 M 1496 1582 1651 1734 1820 2072 2198 2274 3060
for free standing microwave D SULB 2A 208 MD 1496 1582 1651 1734 1820 - - 2274 3060
max. 495 mm wide, 330 mm high behind
lift-up door
niche height 585 - 595 mm
1 hinged door
1 lift-up door
1 fixed panel
1 open niche
2 deep drawers
4.116 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Infill panel for tall units SBF 15 208 M 219 237 255 275 294 337 356 377 444
Finish in continuous door material
split above 715 mm for the following
ranges: Fronts with horizontal graining in
ALNOPLAN.
fitted between wall and carcase
In ALNOART, ALNOCERA,
ALNOSATINA and ALNOVETRINA
door width 75 mm,
adjustment range in
carcase finish 77 - 150 mm.
Other front widths (at least 50 mm)
available with MPS 1 (apart from ALNO-
ART) on request.
Corner infill panel for tall units SEBF 20 208 M V 430 451 470 487 506 567 588 607 751
Finish in continuous door material
split above 715 mm for the following
ranges: Fronts with horizontal graining in
ALNOPLAN.
For variable planning dimensions
for 90° corner solution
min. dimension 50 mm per side.
Max. 180 mm at the carcase front edge
per side.
Side cladding RBS 208 M 769 846 918 992 1854 - 2162 2182 2211
Finish in continuous door material
split above 715 mm for the following
ranges: Fronts with horizontal graining in
ALNOPLAN.
for mounting on the carcase side
50 mm wide
for carcase depth 560 mm
Height- and depth-variable side RBSS V 776 850 924 996 1900 - - 2329 2357
panelling
Finish in door material
for mounting on the carcase side
Height variable from 777 to 1946 mm
50 mm wide
Depth variable from 100 to 732 mm
4.117
high-gloss lacquer
Item
carcase height 2080 mm
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
carcase depth 580 mm
width mm
Laminate
universal
veneer/
hinge
finish
Unit without plinth
Tall shelf unit 300 SR 30 208 1 657 2658 1125 1350 1631 2577 - -
370 mm deep variable width SR 00 208 V 928 3755 1395 1674 2038 3389 - -
5 adjustable shelves from 150 to 600 mm
For colours and versions,
refer to colour matrix carcase
Tall end shelf unit 300 SRA 30 208 L/R 850 2998 1190 1428 1865 2934 - -
580 mm deep
5 fixed shelves
Tall end shelf unit 300 SRE 30 208 L/R 645 2721 984 1181 1660 2729 - -
580 mm deep
5 fixed shelves
4.118 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
high-gloss lacquer
Item
carcase height 2080 mm
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Unit without plinth
Infill panel for tall units 150 SBK 15 208 105 442 126 - 230 362 - -
Finish in carcase material
flush with carcase
fitted between wall and carcase
Infill panel for tall units 150 SBT 15 208 113 487 141 - 251 399 - -
Finish in carcase material
for depth adjustment between carcase
and wall
4.119
4.120
A72
A72
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit S 30 195 M 743 858 924 997 1064 1170 1243 1383 1602
S 45 195 M 786 904 971 1054 1137 1243 1339 1474 1886
2 hinged doors S 50 195 M 800 918 989 1072 1155 1289 1362 1493 1969
3 adjustable shelves
1 fixed shelf S 60 195 M 848 959 1033 1119 1211 1348 1452 1582 2247
1 adjustable shelf
Tall unit for provisions S2A 60 195 M 1112 1223 1297 1383 1475 1612 1716 1846 2511
1 hinged door
3 adjustable shelves
1 fixed shelf
2 deep drawers
Tall unit for broom SB 30 195 M 871 986 1053 1125 1192 1298 1372 1512 1726
SB 45 195 M 916 1032 1100 1182 1267 1372 1468 1602 2007
1 door (dowelled) SB 50 195 M 934 1053 1124 1207 1290 1424 1497 1628 2097
1 fixed shelf
1 hook for brooms SB 60 195 M 974 1085 1160 1245 1337 1475 1579 1709 2367
1 holder for vacuum cleaner hose
1 hook rail
2 runners for adjustable wire baskets
3 wire baskets
Tall unit for provisions SA 30 195 MAK 1637 1757 1822 1893 1962 2066 2138 2280 2454
1 pull-out larder unit dowelled
with cushioned opening and closure
5 baskets
Wire basket finish anthracite grey
Matching accessories:
Electrically assisted opening ZAZ 18
Order Orgaset ZI 3011 AG and ZI 3012 AG
Tall unit for provisions SA 30 195 MA 1856 1977 2041 2111 2182 2285 2357 2499 2663
SA 45 195 MA 1919 2035 2102 2184 2267 2374 2467 2604 2962
same as above, but
Arena shelf finish anthracite grey
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 4.121
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for provisions SIA 30 195 M 1705 1822 1887 1959 2027 2133 2206 2347 2518
SIA 45 195 M 1745 1862 1929 2011 2096 2201 2297 2432 2797
2 hinged doors SIA 50 195 M 1760 1878 1949 2032 2115 2249 2323 2453 2880
1 adjustable shelf
1231 1 fixed shelf SIA 60 195 M 1806 1919 1993 2078 2171 2307 2411 2542 3158
5 interior deep drawers
Tall unit for provisions ST 60 195 MA 1805 1916 1990 2076 2168 2305 2409 2539 3204
1 door (dowelled)
1 swing-out mechanism with
4 fixed baskets
1 Orgaset
5 adjustable shelves shortened in depth
Tall unit for provisions SM 60 195 MA 3002 3114 3189 3273 3366 3503 3608 3737 4293
1 door (dowelled)
1 swing-out mechanism with
4 fixed baskets
1 Orgaset
1 swing-out mechanism with
5 adjustable baskets
Corner storage unit SE 120 195 M 2406 2518 2593 2680 2772 2908 3011 3142 3725
2 side panels 585 mm deep for tall units
+ plinth height
available in all panel colours
Carcase interior colour white or anthracite
grey
1 top shelf 25 mm thick
4 shelves 25 mm thick
1 sliding door with sliding door fitting and
plinth element
Handle vertically over the complete front
height as opening assistance in stainless
steel- effect or aluminium black
Planning dimension 1200 x 600 mm
4.122 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 88 195 M 962 1075 1167 1256 1350 1528 1617 1727 2586
Niche height 878 mm
1 flap door
1 appliance door
1 hinged door
1 adjustable shelf
Tall unit for built-in appliance SU 88 ISIA 195 M 1614 1727 1819 1908 2002 2180 2269 2379 3238
Niche height 878 mm
1 flap door
1 appliance door
1 hinged door
1 internal drawer
2 interior deep drawers
Servodrive assisted opening is available
for appliance hinged door at
MPS SERVO KS surcharge.
Tall unit for built-in appliance SU 88 2A 195 M 1227 1341 1427 1528 1629 1867 1991 2086 2956
Niche height 878 mm
1 flap door
1 appliance door
2 deep drawers
Tall unit for built-in appliance SU 88 S2A 195 M 1407 1523 1610 1726 1848 2109 2219 2309 3248
Niche height 878 mm
1 flap door
1 appliance door
1 drawer
2 deep drawers
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 4.123
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 102 195 M 852 970 1048 1137 1234 1378 1487 1624 2324
Niche height 1025 mm
1 appliance door
1 hinged door
1 adjustable shelf
Tall unit for built-in appliance SU 102 2A 195 M 1131 1246 1321 1420 1538 1725 1887 2009 2721
Niche height 1025 mm
1 appliance door
2 deep drawers
Tall unit for built-in appliance SU 122 A 195 M 1042 1148 1220 1315 1449 1658 1845 1908 2712
Niche height 1225 mm
1 flap door
1 hinged appliance door, dowelled
1 deep drawer
Tall unit for built-in appliance SU 1222TA 195M 1119 1230 1319 1419 1521 1756 1880 1978 2853
Niche height 1225 mm
1 flap door
2 hinged appliance doors
1 deep drawer
4.124 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 140 195 M 924 1018 1124 1207 1289 1466 1534 1655 2560
Niche height 1400 mm
1 hinged door
1 adjustable shelf
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 1452T 1952M 959 1070 1157 1257 1368 1572 1666 1779 2486
niche height 1450 mm
1 flap door
2 hinged appliance doors
Tall unit for built-in appliance SU 159 195 M 951 1064 1155 1244 1339 1517 1604 1716 2573
niche height 1590 mm
1 flap door
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 159 2T 195 M 937 1051 1142 1231 1326 1503 1592 1702 2562
same as above, but
2 hinged appliance doors
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 4.125
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 178 195 M 733 823 900 990 1117 1268 1424 1500 2296
Niche height 1780 mm
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 178 2T 195 M 799 910 984 1070 1162 1299 1404 1533 2200
same as above, but
2 hinged appliance doors
Tall unit for appliances SU 88 72 195 8 910 1023 1115 1204 1298 1476 1565 1675 2536
Niche height
upper 878 mm
lower 716 mm
1 flap door
2 hinged appliance doors
Tall unit for appliances SU 88 88 195 805 930 1006 1106 1208 1344 1442 1497 2252
Niche height
upper 878 mm
lower 878 mm
2 hinged appliance doors
Tall unit for appliances SUB 88 195 809 890 950 1024 1099 1242 1318 1391 2069
Niche height D SUB 88 195 D 809 890 950 1024 1099 - - 1391 2069
upper 585 - 595 mm
lower 878 mm
1 hinged door
1 open niche
1 hinged appliance door
4.126 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SUM 195 872 961 1035 1118 1197 1349 1400 1478 2227
niche height 380 - 450 mm D SUM 195 D 872 961 1035 1118 1197 - - 1478 2227
1 hinged door
1 adjustable shelf
1 open niche
1 hinged door
2 adjustable shelves
Tall unit for built-in appliance SUB 195 M 869 917 993 1065 1137 1273 1321 1412 2130
niche height 585 - 595 mm D SUB 195 MD 869 917 993 1065 1137 - - 1412 2130
1 hinged door
1 adjustable shelf
1 fixed panel
1 open niche
1 hinged door
1 adjustable shelf
Tall unit for built-in appliance SUB ISIA 195 M 1521 1569 1645 1717 1789 1925 1973 2064 2782
niche height 585 - 595 mm D SUB ISIA 195 MD 1521 1569 1645 1717 1789 - - 2064 2782
1 hinged door
1 adjustable shelf
1 fixed panel
1 open niche
1 hinged door
1 internal drawer
2 interior deep drawers
Tall unit for built-in appliance SUB 2A 195 M 1133 1199 1270 1346 1427 1622 1699 1777 2507
niche height 585 - 595 mm D SUB 2A 195 MD 1133 1199 1270 1346 1427 - - 1777 2507
1 hinged door
1 adjustable shelf
1 fixed panel
1 open niche
2 deep drawers
Tall unit for built-in appliance SUB S2A 195 1M 1317 1397 1468 1556 1646 1873 1943 2008 2807
niche height 585 - 595 mm D SUB S2A 195 1MD 1317 1397 1468 1556 1646 - - 2008 2807
1 hinged door
1 adjustable shelf
1 fixed panel
1 open niche
1 drawer
2 deep drawers
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 4.127
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SUMKB 195 M 842 901 960 1023 1087 1254 1306 1366 2043
Niche height D SUMKB 195 MD 842 901 960 1023 1087 - - 1366 2043
upper 334-365 mm
lower 585-595 mm
1 hinged door
2 open niches
1 hinged door
1 adjustable shelf
Tall unit for appliances SUMKB 2A 195 M 1127 1190 1246 1318 1401 1620 1693 1746 2434
Niche height D SUMKB 2A 195 MD 1127 1190 1246 1318 1401 - - 1746 2434
upper 334-365 mm
lower 585-595 mm
1 hinged door
2 open niches
2 deep drawers
The aperture size may be adjusted with
infill panel in door material.
Tall unit for appliances SUMB 195 M 869 917 993 1065 1137 1273 1321 1412 2130
Niche height D SUMB 195 MD 869 917 993 1065 1137 - - 1412 2130
top 380 - 450 mm
bottom 585 - 595 mm
1 flap door
2 open niches
1 hinged door
1 adjustable shelf
Tall unit for appliances SUMB SA 195 M 1109 1175 1246 1322 1403 1598 1675 1753 2483
Niche height D SUMB SA 195 MD 1109 1175 1246 1322 1403 - - 1753 2483
top 380 - 450 mm
bottom 585 - 595 mm
1 hinged door
2 open niches
1 drawer
1 deep drawer
4.128 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SUMB 2A 195 M 1133 1199 1270 1346 1427 1622 1699 1777 2507
Niche height D SUMB 2A 195 MD 1133 1199 1270 1346 1427 - - 1777 2507
top 380 - 450 mm
bottom 585 - 595 mm
1 flap door
2 open niches
2 deep drawers
Tall unit for appliances SULB 195 M 1256 1319 1392 1468 1549 1743 1820 1899 2621
for free standing microwave D SULB 195 MD 1256 1319 1392 1468 1549 - - 1899 2621
max. 495 mm wide, 330 mm high behind
lift-up door
niche height 585 - 595 mm
1 flap door
1 lift-up door
1 fixed panel
1 open niche
1 hinged door
1 adjustable shelf
Tall unit for appliances SULB 2A 195 M 1537 1618 1685 1767 1855 2108 2215 2281 3015
for free standing microwave D SULB 2A 195 MD 1537 1618 1685 1767 1855 - - 2281 3015
max. 495 mm wide, 330 mm high behind
lift-up door
niche height 585 - 595 mm
1 flap door
1 lift-up door
1 fixed panel
1 open niche
2 deep drawers
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 4.129
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Infill panel for tall units SBF 15 195 M 205 223 241 260 278 321 342 360 426
Finish in continuous door material
fitted between wall and carcase
In ALNOART, ALNOCERA,
ALNOSATINA and ALNOVETRINA
door width 75 mm,
adjustment range in
carcase finish 77 - 150 mm.
Other front widths (at least 50 mm)
available with MPS 1 (apart from ALNO-
ART) on request.
Corner infill panel for tall units SEBF 20 195 MV 398 415 435 450 469 525 549 564 697
Finish in continuous door material
For variable planning dimensions
for 90° corner solution
min. dimension 50 mm per side.
max. 180 mm on carcase front edge per
leg
Side cladding RBS 195 759 829 899 969 1780 - 2076 2092 2093
Finish in door material
for mounting on the carcase side
50 mm wide
for carcase depth 560 mm
Height- and depth-variable side RBSS V 776 850 924 996 1900 - - 2329 2357
panelling
Finish in door material
for mounting on the carcase side
Height variable from 777 to 1946 mm
50 mm wide
Depth variable from 100 to 732 mm
4.130
high-gloss lacquer
Item
carcase height 1950 mm
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Unit without plinth
Tall shelf unit 300 SR 30 195 1 648 2558 1099 1319 1617 2483 - -
370 mm deep variable width SR 00 195 V 918 3656 1369 1643 2024 3296 - -
4 adjustable shelves from 150 to 600 mm
For colours and versions,
refer to colour matrix carcase
Tall end shelf unit 300 SRA 30 195 L/R 815 2871 1139 1367 1785 2802 - -
580 mm deep
4 fixed shelves
Tall end shelf unit 300 SRE 30 195 L/R 640 2635 965 1158 1611 2628 - -
580 mm deep
4 fixed shelves
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 4.131
high-gloss lacquer
Item
carcase height 1950 mm
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Unit without plinth
Infill panel for tall unit 150 SBK 15 195 102 424 120 - 220 349 - -
Finish in carcase material
flush with carcase
fitted between wall and carcase
Infill panel for tall units 150 SBT 15 195 111 469 135 - 244 392 - -
Finish in carcase material
for depth adjustment between carcase
and wall
4.132
A72
A72
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit S 30 156 M 696 786 864 906 947 1066 1102 1225 1497
S 45 156 M 744 834 907 950 999 1116 1171 1287 1769
2 hinged doors S 50 156 M 754 848 918 960 1011 1136 1194 1305 1859
1 fixed shelf
3 adjustable shelves S 60 156 M 796 882 957 1010 1066 1176 1248 1355 2046
Tall unit for broom SB 60 156 M 898 984 1059 1112 1168 1278 1350 1457 2143
1 door (dowelled)
1 hook for brooms
1 holder for vacuum cleaner hose
1 hook rail
2 runners for adjustable wire baskets
3 wire baskets
Tall unit for provisions SA 30 156 MAK 1566 1664 1736 1778 1821 1936 1972 2095 2324
1 pull-out larder unit dowelled
with cushioned opening and closure
3 baskets
Wire basket finish anthracite grey
1 fixed shelf
Matching accessories:
Electrically assisted opening ZAZ 18 Order
Orgaset ZI 3011 AG and ZI 3012 AG
Tall unit for provisions SA 30 156 MA 1887 1985 2057 2100 2143 2257 2294 2417 2630
SA 45 156 MA 1761 1850 1922 1965 2013 2131 2184 2301 2738
same as above, but
Arena shelf finish anthracite grey
Tall unit for provisions SIA 30 156 M 1627 1719 1795 1837 1878 1997 2033 2156 2382
SIA 45 156 M 1671 1762 1834 1877 1926 2043 2098 2215 2649
1 hinged door SIA 50 156 M 1686 1780 1850 1893 1944 2070 2127 2237 2746
1 fixed shelf
1 hinged door SIA 60 156 M 1723 1809 1884 1937 1993 2103 2176 2282 2927
5 interior deep drawers
4.133
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Corner tall unit SEKL 110 156 MA 2416 2508 2581 2622 2671 2789 2844 2961 3359
with 45 cm door
1 door (dowelled) SEKL 115 156 MA 2498 2592 2662 2705 2756 2882 2939 3049 3517
4 fully pivotable height adjustable with 50 cm door
carousel shelves LeMans
Arena shelf finish anthracite grey SEKL 125 156 MA 2617 2705 2780 2833 2888 2999 3071 3177 3778
carcase width 1000 mm, without corner with 60 cm door
infill panel
Matching accessories:
self-closing ZID 29 AG
Corner infill panel SEBE 156 72 HM 293 348 425 533 566 658 697 822 930
Finish in door material
consists of: 715 mm high corner panel
and 650 mm wide smooth front panel for
height offset of 1560 on 715 mm
planning dimensions 650 x 650 mm
Corner infill panel SEBE 156 20 72 HMV 321 408 494 605 668 786 812 902 1091
Finish in door material
variable corner infill panel mitred and
front panel
for height adjustment from 1560 to
715 mm, planning dimension
620 - 740 mm per side
Corner infill panel for tall units SEBE 65 156 M 255 266 300 354 372 421 456 527 587
for corner tall unit
fixed size corner infill mitred
planning dimensions 650 x 650 mm
4.134
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Corner infill panel for tall units SEBE 20 156 MV 390 409 425 447 462 520 541 563 695
Finish in door material
variable corner infill panel mitred
Dimensions: 620 - 740 mm per side piece
Tall unit for built-in appliance SU 88 2A 156 M 1055 1149 1217 1299 1382 1563 1652 1727 2412
Niche height 878 mm
1 appliance door
2 deep drawers
1 worktop ventilation grill
Tall unit for built-in appliance SU 102 A 156 M 873 964 1017 1094 1176 1316 1420 1516 2007
Niche height 1025 mm
1 appliance door
1 deep drawer
1 worktop ventilation grill
Tall unit for built-in appliance SU 122 156 M 766 853 927 980 1035 1145 1218 1324 2016
Niche height 1225 mm
1 hinged appliance door, dowelled
1 worktop ventilation grill
Tall unit for built-in appliance SU 122 A 156 874 959 1014 1090 1207 1359 1511 1553 2172
Niche height 1225 mm
1 hinged appliance door
1 deep drawer
1 worktop ventilation grill
Tall unit for built-in appliance SU 145 2T 156 745 832 887 965 1048 1185 1289 1386 1885
niche height 1450 mm
2 hinged appliance doors
1 worktop ventilation grill
4.135
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 1452T 1561M 745 821 895 972 1048 1169 1228 1317 1991
niche height 1450 mm
2 hinged appliance doors
1 worktop ventilation grill
Tall unit for built-in appliance SU 145 2T 156 1 745 821 895 972 1048 1169 1228 1317 1991
niche height 1450 mm
2 hinged appliance doors
1 worktop ventilation grill
Tall unit for appliances SUB 88 156 673 733 775 831 887 975 1016 1068 1559
Niche height
upper 585 - 590 mm
lower 878 mm
1 open niche
1 hinged appliance door
1 worktop ventilation grill
Tall unit for built-in appliance SUB 156 699 759 801 857 914 1001 1041 1093 1582
niche height 585 - 590 mm
1 open niche
1 hinged door
2 adjustable shelves
Tall unit for built-in appliance SUB S 156 M 845 902 946 999 1055 1156 1200 1265 1841
niche height 585 - 590 mm
1 fixed panel
1 open niche
1 drawer
1 hinged door
1 adjustable shelf
Tall unit for built-in appliance SUB S2A 156 M 1133 1193 1243 1306 1377 1574 1645 1690 2251
niche height 585 - 590 mm
1 fixed panel
1 open niche
1 drawer
2 deep drawers
4.136
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SUMKB SA 156 M 978 1021 1059 1112 1178 1340 1378 1410 1910
Niche height
upper 334 - 409 mm
lower 585 - 595 mm
2 open niches
1 drawer
1 deep drawer
Tall unit for appliances SUMB SA 156 M 978 1021 1059 1112 1178 1340 1378 1410 1910
Niche height
top 380 - 450 mm
bottom 585 - 595 mm
2 open niches
1 drawer
1 deep drawer
Tall unit for appliances SULB SA 156 M 1326 1385 1435 1498 1570 1767 1837 1882 2433
for free standing microwave
max. 495 mm wide, 330 mm high behind
lift-up door
niche height 585 - 595 mm
1 lift-up door
1 fixed panel
1 open niche
1 drawer
1 deep drawer
It is essential that the lift-up door remains
open when operating the microwave.
Servodrive assisted opening is available
for upward lifting door at MPS SERVO HL
surcharge.
4.137
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Infill panel for tall unit side SBF 15 156 M 201 214 230 247 263 301 317 338 399
Finish in continuous door material
fitted between wall and carcase
In ALNOART, ALNOCERA,
ALNOSATINA and ALNOVETRINA
door width 75 mm,
adjustment range in
carcase finish 77 - 150 mm.
Other front widths (at least 50 mm)
available with MPS 1 (apart from ALNO-
ART) on request.
Corner infill panel for tall units SEBF 20 156 MV 403 422 441 458 477 539 556 576 709
Finish in continuous door material
For variable planning dimensions
for 90° corner solution
min. dimension 50 mm per side.
max. 180 mm on carcase front edge per
leg
Side cladding RBS 156 598 657 710 768 1409 - 1623 1650 1804
Finish in door material
for mounting on the carcase side
50 mm wide
for carcase depth 560 mm
4.138
high-gloss lacquer
Item
carcase height 1560 mm
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Unit without plinth
Tall shelf unit 300 SR 30 156 1 561 2323 783 940 1445 2243 - -
370 mm deep variable in width SR 00 156 1 V 720 2675 1008 1210 1665 2494 - -
4 adjustable shelves from 150 to 600 mm
For colours and versions,
refer to colour matrix carcase
Tall end shelf unit 300 SRA 30 156 L/R 741 2635 1024 1229 1638 2583 - -
580 mm deep
4 fixed shelves
Tall end shelf unit 300 SRE 30 156 L/R 565 2397 850 1020 1463 2408 - -
580 mm deep
4 fixed shelves
Infill panel for tall units 150 SBK 15 156 99 414 122 - 214 342 - -
Finish in carcase material
flush with carcase
fitted between wall and carcase
Infill panel for tall units 150 SBT 15 156 108 459 134 - 237 375 - -
Finish in carcase material for depth
adjustment between carcase and wall
4.139
4.140
A72
A72
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit S 30 130 609 676 714 755 817 906 1002 1016 1226
S 45 130 642 709 750 807 876 974 1075 1110 1459
1 hinged door S 50 130 649 717 757 819 897 989 1104 1135 1530
3 adjustable shelves
S 60 130 674 744 782 843 937 1031 1168 1201 1682
Tall unit for broom SB 60 130 789 858 898 957 1053 1146 1282 1316 1791
1 hinged door
1 hook for brooms
1 holder for vacuum cleaner hose
1 hook rail
2 runners for adjustable wire baskets
3 wire baskets
Tall unit for provisions SA 30 130 AK 1491 1560 1596 1638 1700 1788 1884 1898 2064
1 pull-out larder unit
3 baskets
Wire basket finish anthracite grey
Matching accessories:
Electrically assisted opening ZAZ 18
Order Orgaset ZI 3011 AG and ZI 3012 AG
Tall unit for provisions SA 30 130 A 1610 1678 1715 1756 1819 1906 2002 2017 2177
SA 45 130 A 1659 1726 1767 1824 1894 1990 2092 2128 2426
same as above, but
Arena shelf finish anthracite grey
1296
Tall unit for provisions SIA 30 130 1368 1434 1472 1513 1575 1665 1760 1774 1946
SIA 45 130 1398 1467 1507 1565 1633 1731 1832 1868 2179
1 hinged door SIA 50 130 1406 1474 1515 1576 1653 1746 1860 1893 2250
4 interior drawers
SIA 60 130 1432 1501 1541 1600 1696 1790 1926 1958 2402
Must not be placed directly alongside
the wall.
Corner tall unit SEKL 110 130 A 2324 2392 2433 2490 2559 2657 2758 2793 3057
with 45 cm door
1 hinged door SEKL 115 130 A 2404 2471 2512 2573 2651 2744 2859 2891 3198
4 fully pivotable height adjustable with 50 cm door
carousel shelves LeMans
Arena shelf finish anthracite grey SEKL 125 130 A 2509 2579 2617 2678 2773 2866 3003 3036 3425
with 60 cm door
carcase width 1000 mm, without corner
infill panel
Matching accessories:
self-closing ZID 29 AG
Corner infill panel SEBE 130 72 H 283 326 396 496 526 - - 762 839
Finish in door material
comprising: corner infill panel 715 mm
high and 650 mm wide smooth front
panel for change in height from 1300 to
715 mm
planning dimensions 650 x 650 mm
4.141
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Corner infill panel SEBE 130 20 72 HV 311 388 463 564 626 733 767 844 1001
Finish in door material
variable corner infill panel mitred and
front panel
for height adjustment from 1300 to
715 mm, planning dimension
620 - 740 mm per side
Corner infill panel SEBE 65 130 221 234 268 321 338 387 421 490 538
for corner tall unit
fixed size corner infill mitred
planning dimensions 650 x 650 mm
Corner infill panel for tall units SEBE 20 130 V 385 403 421 440 458 515 537 555 667
Finish in door material
variable corner infill panel mitred
Dimensions: 620 - 740 mm per side piece
Tall unit for built-in appliance SU 88 130 655 724 764 823 919 1012 1149 1181 1664
Niche height 878 mm
1 appliance door
1 worktop ventilation grill
Tall unit for built-in appliance SU 88 A 130 M 836 915 968 1033 1095 1218 1291 1356 1905
Niche height 878 mm
1 appliance door
1 deep drawer
1 worktop ventilation grill
Tall unit for built-in appliance SU 102 130 655 724 764 823 919 1012 1149 1181 1664
Niche height 1025 mm
1 appliance door
1 worktop ventilation grill
4.142
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 122 130 634 704 743 802 898 990 1126 1160 1641
Niche height 1225 mm
1 hinged appliance door
1 worktop ventilation grill
Tall unit for built-in appliance SU 122 2T 130 716 792 847 911 974 1095 1168 1234 1789
Niche height 1225 mm
2 hinged appliance doors
1 worktop ventilation grill
Tall unit for built-in appliance SUB 130 M 639 665 705 746 787 867 893 941 1354
niche height 585 - 590 mm
1 fixed panel
1 open niche
1 hinged door
1 adjustable shelf
Tall unit for built-in appliance SUB 2A 130 M 920 964 999 1044 1094 1232 1287 1323 1748
niche height 585 - 590 mm
1 fixed panel
1 open niche
2 deep drawers
Tall unit for appliances SUMKB A 130 756 782 806 843 886 990 1012 1034 1400
Niche height
upper 334 - 409 mm
lower 585 - 595 mm
2 open niches
1 deep drawer
Tall unit for appliances SUMB S 130 725 745 755 791 831 899 909 927 1270
Niche height
upper 450 mm
lower 585 - 595 mm
2 open niches
1 drawer
4.143
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Support base for integrated high level SUG A 104 M 549 564 579 596 617 675 692 701 821
dishwasher
1 deep drawer reduced 150 mm from
the back
1 drip tray
Support base and appliance result in a
height of 1040 mm.
Support base for integrated high level SUG A 104 X 600 615 630 647 668 726 743 752 868
dishwasher
1 deep drawer reduced 150 mm from
the back
Support base and appliance result in a
height of 1040 mm.
Support base for integrated high level SUG 2A 130 M 714 746 775 810 852 969 1001 1019 1277
dishwasher
1 drawer 256 mm high reduced 150 mm
from the back
1 drip tray
1 deep drawer reduced 150 mm from
the back
height of appliance 820 mm
Support base for integrated high level SUG 2A 130 X 799 836 870 913 967 1107 1141 1167 1547
dishwasher
1 drawer 256 mm high
reduced 150 mm from the back
1 drip tray
1 deep drawer reduced 150 mm from
the back
Front panel GSB 60 X 134 154 191 223 257 315 337 380 700
for integrated dishwashers
1 front panel without handle drilling
Front panel GSBV 60 X 156 201 239 268 297 353 391 447 814
for fully integrated dishwashers
1 front panel with handle drilling
Front panel GSB 60 72 144 169 195 228 258 308 325 361 655
for integrated dishwashers
1 front panel without handle drilling
4.144
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Front panel GSBV 60 72 165 187 216 256 294 339 369 419 763
for fully integrated dishwashers
1 front panel with handle drilling
Infill panel for tall units SBF 15 130 193 206 221 236 249 283 299 313 367
Finish in door material
fitted between wall and carcase
In ALNOART, ALNOCERA,
ALNOSATINA and ALNOVETRINA
door width 75 mm,
adjustment range in
carcase finish 77 - 150 mm.
Other front widths (at least 50 mm)
available with MPS 1 (apart from ALNO-
ART) on request.
Corner infill panel for tall units SEBF 20 130 V 400 419 437 454 473 533 550 571 683
Finish in continuous door material
For variable planning dimensions
for 90° corner solution
Min. dimension 50 mm per side.
max. 180 mm on carcase front edge per
leg
Side cladding RBS 130 572 621 670 720 1263 - 1452 1470 1519
Finish in door material
for mounting on the carcase side
50 mm wide
for carcase depth 560 mm
4.145
high-gloss lacquer
Item
carcase height 1300 mm
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Unit without plinth
Tall shelf unit 300 SR 30 130 1 518 2108 726 871 1312 2071 - -
variable in width SR 00 130 1 V 676 2456 950 1140 1529 2316 - -
370 mm deep from 150 to 600 mm
3 adjustable shelves
Tall end shelf unit 300 SRA 30 130 L/R 691 2518 968 1162 1568 2468 - -
580 mm deep
3 fixed shelves
Tall end shelf unit 300 SRE 30 130 L/R 544 2323 821 985 1421 2261 - -
580 mm deep
3 fixed shelves
Infill panel for tall units 150 SBK 15 130 94 408 120 - 211 337 - -
Finish in carcase material
flush with carcase
fitted between wall and carcase
Infill panel for tall units 150 SBT 15 130 104 449 132 - 233 371 - -
Finish in carcase material for depth
adjustment between carcase and wall
4.146
5. Modular panels/visible
sides/top panels/shelves
5.01
5.02
Colour code
Material thickness (mm) 75 16 25 50
Worktop alpine oak-effect No. 614 l No. 614 l l l
surface: Colours
anthracite grey No. 193 l No. 193 l l l
aqua metal No. 602 l No. 602 l l l
Arizona pine-effect No. 642 l No. 642 l l l
canyon No. 643 l No. 643 l l l
carbon oak-effect No. 159 l No. 859 l l l
castell oak-effect No. P79 l No. P79 l l l
oak-effect cashmere grey No. 127 l No. 127 l l l
natural oak-effect No. 173 l No. 173 l l l
fango No. 180 l No. 180 l l l
ferro bronze No. 621 l No. 621 l l l
ferro titanium No. 622 l No. 622 l l l
graphite No. 123 l No. 123 l l l
light grey No. 179 l No. 179 l l l
end-grained wood oak-effect No. 637 l No. 637 l l l
cashmere No. 190 l No. 190 l l l
Katthult pine-effect No. 134 l No. 134 l l l
lava grey, stone structure No. P27 l No. P27 l l l
magnolia white No. 148 l No. 148 l l l
Manhattan grey No. 111 l No. 811 l l l
marble carrara white No. 605 l No. 605 l l l
marble mocha black No. 632 l No. 632 l l l
marble truffle No. 660 l No. 660 l l l
oxide anthracite grey No. 696 l No. 696 l l l
oxide concrete No. 631 l No. 631 l l l
oxide light grey No. 600 l No. 600 l l l
Sanremo oak-effect No. P78 l No. 158 l l l
soapstone beige No. P32 l No. P32 l l l
Stone oak-effect No. 135 l No. 135 l l l
travertine grey No. 624 l No. 624 l l l
elm-effect caramel No. 657 l No. 657 l l l
ultra white No. 128 l No. 128 l l l
vintage oak-effect No. 166 l No. 166 l l l
walnut-effect No. 194 l No. 194 l l l
white No. 101 l No. 101 l l l
5.03
5.04
A78 A72
high-gloss lacquer
Item
Colours and finishes see colour matrix
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Panels 10 mm
Panel 10 mm thick with slightly rounded
edge on all lengthways and front edges.
Modular panel for base unit carcase 585 mm deep for car- 10 WUK 078 - 851 - - 357 608 - -
height case depth of 560 mm
610 mm deep for 10 WUK 078 R - 867 - - 367 619 - -
for 780 mm high base unit room dividers and
carc. depth 560 mm
735 mm deep for 10 WUK 078 7 - 895 - - 388 640 - -
carcase depth of 710 mm
for room dividers, 10 WUK 078 RV - 1659 - - 656 1185 - -
variable depth 100-1170 mm
Modular panel for base unit carcase 585 mm deep for car- 10 WUK 072 - 821 - - 344 587 - -
height case depth of 560 mm
610 mm deep for 10 WUK 072 R - 838 - - 353 599 - -
for 715 mm base unit room dividers and
Variable dimensions without surcharge carc. depth 560 mm
also available for carcase height 390 mm for room dividers, 10 WUK 072 RV - 1629 - - 642 1164 - -
and 325 mm! variable depth
100-1170 mm
Modular panel for base unit 585 mm deep for car- 10 WU 039 F - 873 - - 367 623 - -
case depth of 560 mm
for 390 mm high base unit Edition Fly
Modular panel for wall unit 910 mm high 10 WO 091 - 688 - - 299 492 - -
780 mm high 10 WO 078 - 638 - - 279 456 - -
375 mm deep 650 mm high 10 WO 065 - 604 - - 266 431 - -
520 mm high 10 WO 052 - 5557 - - 248 398 - -
390 mm high 10 WO 039 - 523 - - 231 373 - -
Modular panel for tall unit carcase Carcase height 2210 mm 10 WSK 0221 - 1375 - - 580 982 - -
height Carcase height 2080 mm 10 WSK 0208 - 1281 - - 538 915 - -
Carcase height 1950 mm 10 WSK 0195 - 1197 - - 497 855 - -
for tall unit
585 mm deep Carcase height 1560 mm 10 WSK 0156 - 1067 - - 441 762 - -
Carcase height 1300 mm 10 WSK 0130 - 1012 - - 421 723 - -
5.05
high-gloss lacquer
Item
Colours and finishes see colour matrix
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Height and depth adjustable modular 10 WSK 02 V - 1909 - - 851 1364 - -
panel carcase height
Height 1001 mm up to 2600 mm max.
with max. depth 800 mm
Minimum depth 100 mm
also for room dividers
per item
5.06
high-gloss lacquer
Item
Colours and finishes see colour matrix
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Panels 16 mm
Panel 16 mm thick with slightly rounded
edge on all lengthways and front edges.
Modular panel for base unit 585 mm deep for car- 16 WU 178 164 709 244 266 365 502 - -
case depth of 560 mm
for 780 mm base unit 610 mm deep for 16 WU 178 R 168 725 254 275 374 507 - -
+ plinth height room dividers and
With panel protector in stainless-steel
effect or black. carc. depth 560 mm
735 mm deep for 16 WU 178 7 170 747 270 294 392 529 - -
carcase depth of 710 mm
for room dividers, 16 WU 178 RV 220 1209 339 383 624 712 - -
variable depth 100-1170 mm
Modular panel for base unit carcase 585 mm deep for car- 16 WUK 178 137 611 209 226 309 464 - -
height case depth of 560 mm
610 mm deep for 16 WUK 178 R 141 628 219 236 318 468 - -
for 780 mm high base unit room dividers and
carc. depth 560 mm
735 mm deep for 16 WUK 178 7 143 649 236 254 336 486 - -
carcase depth of 710 mm
for room dividers, 16 WUK 178 RV 193 1111 304 343 568 555 - -
variable depth 100-1170 mm
Modular panel for base unit 585 mm deep for car- 16 WU 172 161 687 238 259 354 496 - -
case depth of 560 mm
for 715 mm base unit + plinth height 610 mm deep for 16 WU 172 R 165 704 249 269 362 499 - -
With panel protector in stainless-steel room dividers and
effect or black.
carc. depth 560 mm
Variable dimensions without surcharge for room dividers, 16 WU 172 RV 217 1187 333 376 612 591 - -
also available for carcase height 390 mm variable depth
and 325 mm! 100-1170 mm
Modular panel for base unit carcase 585 mm deep for car- 16 WUK 172 133 590 203 219 298 457 - -
height case depth of 560 mm
610 mm deep for 16 WUK 172 R 138 606 214 230 306 461 - -
for 715 mm base unit room dividers and
Variable dimensions without surcharge carc. depth 560 mm
also available for carcase height 390 mm for room dividers, 16 WUK 172 RV 190 1089 299 337 556 542 - -
and 325 mm! variable depth
100-1170 mm
Modular panel for base unit 585 mm deep for car- 16 WU 139 F 116 611 194 215 318 320 - -
case depth of 560 mm
for 390 mm high base unit Edition Fly
Modular panel for wall unit 910 mm high 16 WO 191 95 503 137 154 259 345 - -
780 mm high 16 WO 178 92 467 130 148 242 335 - -
375 mm deep 650 mm high 16 WO 165 89 444 122 141 231 324 - -
520 mm high 16 WO 152 83 412 118 137 214 314 - -
390 mm high 16 WO 139 79 386 110 125 200 304 - -
5.07
high-gloss lacquer
Item
Colours and finishes see colour matrix
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Modular panel for tall unit Carcase height 2210 mm 16 WS 1221 223 1079 365 463 559 781 - -
Carcase height 2080 mm 16 WS 1208 214 1006 349 443 521 766 - -
for tall units + plinth height Carcase height 1950 mm 16 WS 1195 206 944 337 422 487 750 - -
585 mm deep
With panel protector in stainless-steel Carcase height 1560 mm 16 WS 1156 198 847 322 374 438 595 - -
effect or black. Carcase height 1300 mm 16 WS 1130 186 819 303 349 421 564 - -
Modular panel for tall unit carcase Carcase height 2210 mm 16 WSK 1221 196 982 330 422 503 744 - -
height Carcase height 2080 mm 16 WSK 1208 186 908 314 402 465 727 - -
Carcase height 1950 mm 16 WSK 1195 179 846 302 383 430 712 - -
for tall unit
585 mm deep Carcase height 1560 mm 16 WSK 1156 169 749 288 335 381 557 - -
Carcase height 1300 mm 16 WSK 1130 158 721 268 309 365 526 - -
Height and depth adjustable modular 16 WU 12 V 221 1216 360 453 627 758 - -
panel
Height up to 1100 mm with max. depth
1170 mm.
Min. dimension 100 mm
also for room dividers
With panel protector in stainless-steel
effect or black.
per item
Height and depth adjustable modular 16 WUK 12 V 208 1215 348 444 620 731 - -
panel carcase height
Height up to 1100 mm with max. depth
1170 mm.
Min. dimension 100 mm
also for room dividers
per item
Height and depth adjustable modular 16 WS 12 V 259 1436 437 528 741 902 - -
panel
Height 1001 mm up to 2600 mm max.
with max. depth 800 mm
Minimum depth 100 mm
also for room dividers
With panel protector in stainless-steel
effect or black.
per item
Height and depth adjustable modular 16 WSK 12 V 246 1439 427 520 736 875 - -
panel carcase height
Height 1001 mm up to 2600 mm max.
with max. depth 800 mm
Minimum depth 100 mm
also for room dividers
per item
5.08
high-gloss lacquer
Item
Colours and finishes see colour matrix
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Height and depth adjustable modular 16 WO 12 V 108 539 175 187 277 498 - -
panel
Height: 100 - 1560 mm
Depth: 100 - 375 mm
for dresser and wall units
per item
Panels 25 mm
Panel 25 mm thick with slightly rounded
edge on all lengthways and front edges.
Modular panel for base unit 585 mm deep for car- 25 WU 78 188 796 278 313 411 509 - -
case depth of 560 mm
for 780 mm base unit 610 mm deep for 25 WU 78 R 196 814 289 322 419 513 - -
+ plinth height room dividers and
With panel protector in stainless-steel
effect or black. carc. depth 560 mm
735 mm deep for 25 WU 78 7 242 847 329 366 438 539 - -
carcase depth of 710 mm
for room dividers, 25 WU 78 RV 258 1246 392 447 644 729 - -
variable depth 100-1170 mm
Modular panel for base unit carcase 585 mm deep for car- 25 WUK 78 159 690 241 271 349 471 - -
height case depth of 560 mm
610 mm deep for 25 WUK 78 R 166 709 251 281 358 475 - -
for 780 mm high base unit room dividers and
carc. depth 560 mm
735 mm deep for 25 WUK 78 7 213 741 292 324 376 498 - -
carcase depth of 710 mm
for room dividers, 25 WUK 78 RV 230 1141 354 404 581 571 - -
variable depth 100-1170 mm
Modular panel for base unit 600 mm deep for 25 WUF 78 226 847 317 352 449 513 - -
carcase depth 560 mm
for free-standing 780 mm high 610 mm deep for 25 WUF 78 R 234 866 325 360 457 515 - -
base unit + plinth height incl. connecting room dividers and
element to worktop.
With panel protector in stainless-steel carc. depth 560 mm
effect or black. 750 mm deep for 25 WUF 78 7 281 898 367 404 475 543 - -
carcase depth 710 mm
An unsupported worktop must not for room dividers, 25 WUF 78 RV 296 1297 429 485 681 730 - -
span more than 2000 mm! Can only be variable depth
planned unsupported on one side. Height 100-1170 mm
adjustment range -5 / +12 mm.
ZF 47.. is recommended for stabilization.
Modular panel for base unit 585 mm deep for car- 25 WU 72 185 771 273 306 398 501 - -
case depth of 560 mm
for 715 mm base unit + plinth height 610 mm deep for 25 WU 72 R 193 789 284 314 407 506 - -
With panel protector in stainless-steel room dividers and
effect or black.
carc. depth 560 mm
Variable dimensions without surcharge for room dividers, 25 WU 72 RV 255 1221 386 439 630 606 - -
also available for carcase height 390 mm variable depth
and 325 mm! 100-1170 mm
5.09
high-gloss lacquer
Item
Colours and finishes see colour matrix
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Modular panel for base unit carcase 585 mm deep for car- 25 WUK 72 185 665 274 264 337 464 - -
height case depth of 560 mm
610 mm deep for 25 WUK 72 R 193 684 285 272 345 467 - -
for 715 mm base unit room dividers and
Variable dimensions without surcharge carc. depth 560 mm
also available for carcase height 390 mm for room dividers, 25 WUK 72 RV 255 1117 387 397 569 556 - -
and 325 mm! variable depth
100-1170 mm
Modular panel for base unit 600 mm deep for 25 WUF 72 222 822 311 344 436 505 - -
carcase depth 560 mm
for free-standing 715 mm high 610 mm deep for 25 WUF 72 R 231 842 320 353 445 507 - -
base unit + plinth height incl. connecting room dividers and
element to worktop.
With panel protector in stainless-steel carc. depth 560 mm
effect or black. for room dividers, 25 WUF 72 RV 293 1272 424 476 668 607 - -
variable depth
Variable dimensions without surcharge 100-1170 mm
also available for carcase height 390 mm
and 325 mm!
Modular panel for base unit 585 mm deep for car- 25 WU 39 F 170 719 236 265 373 322 - -
case depth of 560 mm
for 390 mm high base unit Edition Fly
Modular panel for wall unit 910 mm high 25 WO 91 121 550 170 205 284 348 - -
780 mm high 25 WO 78 116 515 167 199 268 337 - -
375 mm deep 650 mm high 25 WO 65 110 482 155 188 249 325 - -
520 mm high 25 WO 52 105 453 150 182 235 314 - -
390 mm high 25 WO 39 100 428 143 174 220 303 - -
Modular panel for tall unit Carcase height 2210 mm 25 WS 221 319 1266 416 561 653 805 - -
Carcase height 2080 mm 25 WS 208 307 1185 395 534 612 787 - -
for tall units + plinth height Carcase height 1950 mm 25 WS 195 295 1111 376 510 573 771 - -
585 mm deep
With panel protector in stainless-steel Carcase height 1560 mm 25 WS 156 286 1016 363 463 524 611 - -
effect or black. Carcase height 1300 mm 25 WS 130 262 968 330 422 499 576 - -
Modular panel for tall unit carcase Carcase height 2210 mm 25 WSK 221 290 1161 378 519 592 767 - -
height Carcase height 2080 mm 25 WSK 208 277 1079 357 492 551 750 - -
Carcase height 1950 mm 25 WSK 195 266 1006 339 468 511 733 - -
for tall unit
585 mm deep Carcase height 1560 mm 25 WSK 156 256 910 325 420 463 573 - -
Carcase height 1300 mm 25 WSK 130 233 862 293 380 437 540 - -
5.10
high-gloss lacquer
Item
Colours and finishes see colour matrix
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Height and depth adjustable modular 25 WU 2 V 314 1399 408 547 720 778 - -
panel
Height up to 1100 mm with max. depth
1170 mm.
Min. dimension 100 mm
also for room dividers
With panel protector in stainless-steel
effect or black.
per item
Height and depth adjustable modular 25 WUK 2 V 291 1321 378 515 672 754 - -
panel carcase height
Height up to 1100 mm with max. depth
1170 mm.
Min. dimension 100 mm
also for room dividers
per item
Height and depth adjustable modular 25 WUF 2 V 351 1448 446 582 758 780 - -
panel
for free-standing units,
Height up to 1100 mm with max. depth
1170 mm.
Min. dimension 100 mm
also for room dividers
incl. connecting element to worktop.
With panel protector in stainless-steel
effect or black.
per item
Height and depth adjustable modular 25 WS 2 V 405 1722 539 675 889 936 - -
panel
Height 1001 mm up to 2600 mm max.
with max. depth 800 mm
Minimum depth 100 mm
also for room dividers
With panel protector in stainless-steel
effect or black.
per item
Height and depth adjustable modular 25 WSK 2 V 384 1649 511 647 845 911 - -
panel carcase height
Height 1001 mm up to 2600 mm max.
with max. depth 800 mm
Minimum depth 100 mm
also for room dividers
per item
5.11
high-gloss lacquer
Item
Colours and finishes see colour matrix
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Height and depth adjustable modular 25 WO 2 V 164 652 223 255 338 508 - -
panel
Height: 100 - 1560 mm
Depth: 100 - 375 mm
for dresser and wall units
per item
Modular panels 50 mm
Panel 50 mm thick, with slightly rounded
edge on all sides.
Modular panel 600 mm deep for 50 PWU 578 287 1034 417 460 533 1746 - -
carcase depth of 560 mm
for 780 mm base unit 640 mm deep for room 50 PWU 578 R 297 1061 430 488 549 1834 - -
+ plinth height divider and carcase depth
With panel protector in stainless-steel
effect or black. 560 mm
750 mm deep for 50 PWU 578 7 299 1086 440 512 561 2074 - -
carcase depth of 710 mm
for room dividers, 50 PWU 578 RV 377 1266 549 618 655 3055 - -
variable depth 100-1200 mm
Modular panel carcase height 600 mm deep for 50 PWUK 578 257 924 377 416 527 1665 - -
carcase depth of 560 mm
for 780 mm high base unit 640 mm deep for room 50 PWUK 578 R 267 951 392 444 542 1752 - -
divider and carcase depth
560 mm
750 mm deep for 50 PWUK 578 7 269 976 400 468 555 1992 - -
carcase depth of 710 mm
for room dividers, 50 PWUK 578 RV 348 1156 509 574 648 2973 - -
variable depth 100-1200 mm
Modular panel 600 mm deep for 50 PWUF 578 304 1070 444 487 553 1854 - -
carcase depth of 560 mm
for free-standing 780 mm high 640 mm deep for room 50 PWUF 578 R 307 1083 450 506 558 1935 - -
base unit + plinth height incl. connecting divider and carcase depth
element to worktop.
With panel protector in stainless-steel 560 mm
effect or black. 750 mm deep for 50 PWUF 578 7 319 1122 466 539 579 2183 - -
carcase depth of 710 mm
Unsupported worktop must not span more for room dividers, 50 PWUF 578 RV 388 1289 567 639 665 3158 - -
than 2000 mm! Can only be planned variable depth
without support on one side. Height 100-1200 mm
adjustment range -5 / +12 mm.
ZF 47.. is recommended for stabilization.
Modular panel 600 mm deep for 50 PWU 572 284 1008 410 452 520 1727 - -
carcase depth of 560 mm
for 715 mm base unit + plinth height 640 mm deep for room 50 PWU 572 R 294 1034 424 479 534 1815 - -
With panel protector in stainless-steel divider and carcase depth
effect or black.
560 mm
Variable dimensions without surcharge for room dividers, 50 PWU 572 RV 374 1240 542 610 641 3036 - -
also available for carcase height 390 mm variable depth
and 325 mm! 100-1200 mm
5.12
high-gloss lacquer
Item
Colours and finishes see colour matrix
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Modular panel carcase height 600 mm deep for 50 PWUK 572 254 898 371 455 456 1645 - -
carcase depth of 560 mm
for 715 mm base unit 640 mm deep for room 50 PWUK 572 R 264 924 386 482 471 1733 - -
divider and carcase depth
Variable dimensions without surcharge
also available for carcase height 390 mm 560 mm
and 325 mm! for room dividers, 50 PWUK 572 RV 345 1130 503 613 577 2954 - -
variable depth
100-1200 mm
Modular panel 600 mm deep for 50 PWUF 572 301 1043 437 478 539 1835 - -
carcase depth of 560 mm
for free-standing 715 mm high 640 mm deep for room 50 PWUF 572 R 303 1059 444 498 545 1916 - -
base unit + plinth height incl. connecting divider and carcase depth
element to worktop.
With panel protector in stainless-steel 560 mm
effect or black. for room dividers, 50 PWUF 572 RV 384 1263 561 630 652 3139 - -
variable depth
Variable dimensions without surcharge 100-1200 mm
also available for carcase height 390 mm
and 325 mm!
Modular panel 910 mm high 50 PWO 591 208 763 289 330 398 1078 - -
780 mm high 50 PWO 578 203 730 285 322 378 973 - -
for wall units 650 mm high 50 PWO 565 198 697 281 316 362 871 - -
375 mm deep
520 mm high 50 PWO 552 193 660 269 304 342 762 - -
390 mm high 50 PWO 539 191 629 266 300 326 660 - -
Modular panel Carcase height 2210 mm 50 PWS 5221 435 1625 635 741 840 3633 - -
Carcase height 2080 mm 50 PWS 5208 427 1537 619 720 795 3463 - -
for tall units + plinth height Carcase height 1950 mm 50 PWS 5195 417 1452 608 701 751 3292 - -
600 mm deep
With panel protector in stainless-steel Carcase height 1560 mm 50 PWS 5156 390 1338 569 627 692 2776 - -
effect or black. Carcase height 1300 mm 50 PWS 5130 372 1286 543 591 665 2438 - -
Modular panel carcase height Carcase height 2210 mm 50 PWSK 5221 405 1515 596 696 833 3552 - -
Carcase height 2080 mm 50 PWSK 5208 398 1427 580 675 788 3380 - -
for tall unit Carcase height 1950 mm 50 PWSK 5195 388 1341 568 657 745 3210 - -
600 mm deep
Carcase height 1560 mm 50 PWSK 5156 360 1228 530 582 685 2695 - -
Carcase height 1300 mm 50 PWSK 5130 343 1176 504 547 659 2356 - -
5.13
high-gloss lacquer
Item
Colours and finishes see colour matrix
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Height and depth adjustable modular 50 PWU 5 V 415 1469 607 709 759 3049 - -
panel
height up to 1100 mm with max. depth
1200 mm.
Min. dimension 100 mm
also for room dividers
With panel protector in stainless-steel
effect or black.
per item
Height and depth adjustable modular 50 PWUK 5 V 397 1444 589 691 741 3030 - -
panel carcase height
height up to 1100 mm with max. depth
1200 mm.
Min. dimension 100 mm
also for room dividers
per item
Height and depth adjustable modular 50 PWUF 5 V 444 1566 636 737 806 3080 - -
panel
for free-standing units,
height up to 1100 mm with max. depth
1200 mm.
Min. dimension 100 mm
also for room dividers
incl. connecting element to worktop.
With panel protector in stainless-steel
effect or black.
per item
Height and depth adjustable modular 50 PWS 5 V 559 1974 816 917 1019 3626 - -
panel
Height 1001 mm up to 2600 mm max.
with max. depth 800 mm
Minimum depth 100 mm
also for room dividers
With panel protector in stainless-steel
effect or black.
per item
Height and depth adjustable modular 50 PWSK 5 V 541 1948 798 899 1002 3608 - -
panel carcase height
Height 1001 mm up to 2600 mm max.
with max. depth 800 mm
Minimum depth 100 mm
also for room dividers
per item
5.14
high-gloss lacquer
Item
Colours and finishes see colour matrix
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Height and depth adjustable modular 50 PWO 5 V 232 857 334 376 444 1464 - -
panel
Height: 100 - 1560 mm
Depth: 100 - 375 mm
for dresser and wall units
per item
Desk panel for base unit 600 mm deep for 75 PWU 78 - - - - - - - 908
carcase depth 560 mm
75 mm thick, with height adjustment 640 mm deep for room 75 PWU 78 R - - - - - - - 908
bracket. divider and carcase depth
for 780 mm base unit
+ plinth height 560 mm
Both surfaces and all edges with same 750 mm deep for 75 PWU 78 7 - - - - - - - 908
finish as worktop surface. carcase depth 710 mm
790 mm deep for room 75 PWU 78 7 R - - - - - - - 908
Total weight per m² approx. 33 kg. divider and carcase depth
710 mm
895 mm deep 75 PWU 78 9 - - - - - - - 908
Desk panel for base unit 600 mm deep for 75 PWU 72 - - - - - - - 872
carcase depth 560 mm
75 mm thick, with height adjustment 640 mm deep for room 75 PWU 72 R - - - - - - - 872
bracket. divider and carcase depth
for 715 mm base unit + plinth height
Both surfaces and all edges with same 560 mm
finish as worktop surface. 895 mm deep 75 PWU 72 9 - - - - - - - 872
5.15
high-gloss lacquer
Item
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Visible side of base unit 780 mm high SSU 65 L/R 0 600 51 - 152 258 - -
715 mm high SSU 72 L/R 0 578 50 - 144 241 - -
Please state whether the right or left or 390 mm high SSU 35 L/R 0 460 43 - 126 205 - -
both sides are to be visible.
325 mm high SSU 33 L/R 0 437 41 - 122 197 - -
Available in all visible side colours.
Visible side of wall unit 1300 mm high SSH 03 L/R 0 611 38 - 136 243 - -
910 mm high SSH 73 L/R 0 523 37 - 108 192 - -
as above 780 mm high SSH 63 L/R 0 495 36 - 98 174 - -
Available in all visible side colours. 715 mm high
650 mm high SSH 53 L/R 0 465 35 - 90 159 - -
520 mm high SSH 43 L/R 0 437 34 - 81 140 - -
390 mm high SSH 33 L/R 0 407 32 - 74 123 - -
260 mm high SSH 23 L/R 0 378 29 - 63 108 - -
Visible side of tall unit 2210 mm high SSS 75 L/R 0 1112 109 242 376 629 - -
2080 mm high SSS 65 L/R 0 1065 104 227 361 595 - -
as above 1950 mm high SSS 55 L/R 0 1019 99 215 345 562 - -
Available in all visible side colours. 1560 mm high SSS 25 L/R 0 879 97 - 284 457 - -
Laminate only for the modular panels of 1300 mm high SSS 05 L/R 0 785 92 - 251 395 - -
storage units.
Visible side of dresser unit 1390 mm high SSA 73 L/R 0 631 54 - 148 258 - -
1260 mm high SSA 63 L/R 0 602 52 - 140 243 - -
as above 1130 mm high SSA 53 L/R 0 573 50 - 133 224 - -
Available in all visible side colours.
5.16
Cover panels/shelves
high-gloss lacquer
Item
Colours and finishes see colour matrix
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Top panel 10 mm
Panel 10 mm thick with slightly rounded
edge on all lengthways and front edges.
Top panel for display units per metre P 03 - 568 - - 284 406 - -
100 - 375 mm
max. length 2600 mm
Min. dimension 70 mm
Can also be used on top or bottom of wall
units.
The top panels can be planned with an
overhang of a maximum of 250 mm.
Top panels for tall units per metre P 06 - 888 - - 406 634 - -
376 - 610 mm
max. length 2600 mm
Min. dimension 70 mm
Top panels for tall units per metre P 00 - 1691 - - 811 1208 - -
same as above, but
611 - 1200 mm
max. length 1800 mm
Top panel 16 mm
Panel 16 mm thick with slightly rounded
edge on all lengthways and front edges.
Top panel for display units per metre P 13 112 479 147 151 258 369 - -
100 - 375 mm
max. length 2600 mm
Min. dimension 70 mm
Can also be used on top or bottom of wall
units.
The top panels can be planned with an
overhang of a maximum of 250 mm.
5.17
high-gloss lacquer
Item
Colours and finishes see colour matrix
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Top panels for tall units per metre P 16 138 712 192 198 369 576 - -
376 - 610 mm
max. length 2600 mm
Min. dimension 70 mm
Top panels for tall units per metre P 10 273 1424 384 397 737 1098 - -
same as above, but
611 - 1200 mm
max. length 1800 mm
Finished in decor, laminate and gloss
laminate
max. length 2600 mm
Corner cutout with edging for PS/P worktops AUS 4016 - - - - - - - 148
acc. to drawing
Supplement per cutout
Rounded corner with edging for PS/P worktops AUS 7016 - - - - - - - 120
acc. to drawing
Surcharge per rounding
min. radius 30 mm
5.18
high-gloss lacquer
Item
Colours and finishes see colour matrix
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Top panel 25 mm
Panel 25 mm thick with slightly rounded
edge on all lengthways and front edges.
Top panel for display units per metre P 23 148 527 181 187 293 405 - -
100 - 375 mm
max. length 2600 mm
Min. dimension 70 mm
Can also be used on top or bottom of wall
units.
The top panels can be planned with an
overhang of a maximum of 250 mm.
Top panels for tall units per metre P 26 173 759 227 235 405 611 - -
376 - 610 mm
max. length 2600 mm
Min. dimension 70 mm
Top panels for tall units per metre P 22 311 1474 418 431 774 1133 - -
Corner cutout with edging for PS/P worktops AUS 4000 - - - - - - - 136
acc. to drawing
Supplement per cutout
5.19
high-gloss lacquer
Item
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Rounded corner with edging for PS/P worktops AUS 7000 - - - - - - - 108
acc. to drawing
Surcharge per rounding
min. radius 30 mm
Top covers 50 mm
Board 50 mm thick with slightly rounded
edge on all lengthways and front edges.
Top panels for tall units per metre PS 56 S 226 609 265 359 426 1513 - -
100 - 640 mm
max. length 2600 mm
Min. dimension 70 mm
Top panels for tall units per metre PS 52 S 594 1665 718 891 1166 2713 - -
5.20
high-gloss lacquer
Item
Colours and finishes see colour matrix
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Shelf 190 mm deep with 3 supports 1000 BR 100 19 122 524 159 181 271 492 - -
with 3 supports 900 BR 90 19 118 505 155 177 263 475 - -
25 mm thick with 3 supports 800 BR 80 19 114 472 148 171 244 450 - -
for installing individually in niche area.
with 2 supports 600 BR 60 19 108 444 140 164 231 422 - -
with 2 supports 500 BR 50 19 98 404 126 152 210 388 - -
with 2 supports 450 BR 45 19 94 389 122 148 201 375 - -
220 mm to max. 2600 mm length from 1370 mm 4 supports BR 260 19 213 888 274 297 460 833 - -
max. load per shelf support 8 kg from 1760 mm 5 supports
distance between supports 500 mm from 2360 mm 6 supports
When putting more load onto the shelf
we recommend to use additional support
ZN 11 26 C
per metre
Shelf 320 mm deep with 3 supports 1000 BR 100 32 238 760 289 328 395 609 - -
with 3 supports 900 BR 90 32 235 744 287 325 386 595 - -
25 mm thick with 3 supports 800 BR 80 32 231 713 285 321 370 567 - -
for installing individually in niche area.
with 2 supports 600 BR 60 32 220 656 276 310 340 520 - -
with metal supports with 2 supports 500 BR 50 32 201 617 257 286 319 482 - -
up to 500 mm = 1 support with 2 supports 450 BR 45 32 196 601 248 276 312 475 - -
up to 1000 mm = 2 supports
per additional 1000 mm + 1 support
220 mm to max. 2600 mm length from 1370 mm 4 supports BR 260 32 327 1125 406 448 584 919 - -
max. load per shelf support 8 kg from 1760 mm 5 supports
distance between supports 500 mm from 2360 mm 6 supports
per metre
Shelf 190 mm deep with 2 supports 450 BRS 455 19 346 912 389 420 473 700 - -
with 2 supports 500 BRS 505 19 350 931 392 425 483 719 - -
50 mm thick with 2 supports 600 BRS 605 19 352 955 397 429 494 757 - -
for installing individually in niche area.
with 2 supports 800 BRS 805 19 455 1162 496 534 604 939 - -
incl. concealed shelf supports with 3 supports 900 BRS 905 19 459 1192 499 537 617 981 - -
with 3 supports 1000 BRS 1005 19 473 1232 516 557 640 1016 - -
max. load per shelf support 11 kg
Shelf 190 mm deep from 1370 mm 4 supports BRS 2605 19 622 1757 712 752 910 1401 - -
from 1760 mm 5 supports
same as above, but from 2360 mm 6 supports
width variable: from 300 mm to
max. 2600 mm
per metre
5.21
high-gloss lacquer
Item
Colours and finishes see colour matrix
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Shelf 320 mm deep with 2 supports 450 BRS 455 32 352 945 397 458 490 817 - -
with 2 supports 500 BRS 505 32 360 969 405 465 502 845 - -
50 mm thick with 2 supports 600 BRS 605 32 362 992 409 475 515 917 - -
for installing individually in niche area.
with 2 supports 800 BRS 805 32 465 1205 505 595 622 1151 - -
incl. concealed shelf supports with 3 supports 900 BRS 905 32 468 1232 510 609 640 1214 - -
with 3 supports 1000 BRS 1005 32 481 1274 526 635 660 1275 - -
max. load per shelf support 11 kg
Shelf 320 mm deep from 1370 mm 4 supports BRS 2605 32 640 1795 731 839 931 1665 - -
from 1760 mm 5 supports
same as above, but from 2360 mm 6 supports
width variable: from 300 mm to
max. 2600 mm
per metre
5.22
high-gloss lacquer
Item
Colours and finishes see colour matrix
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Shelf 190 mm deep 450 BR 455 19 159 552 210 236 288 488 - -
500 BR 505 19 164 573 213 239 296 505 - -
for installing individually in niche area. 600 BR 605 19 167 595 216 242 309 545 - -
50 mm thick
800 BR 805 19 175 622 231 256 323 621 - -
Order shelf support ZN 850.. separately 900 BR 905 19 180 656 235 260 340 663 - -
Special depths between 190 and 130 mm 1000 BR 1005 19 194 696 251 276 361 698 - -
are available on request at no extra
charge
Light slots not possible
Shelf 190 mm deep BR 2605 19 345 1217 447 473 632 1083 - -
same as above, but
width variable: from 220 mm to
max. 2600 mm
per metre
Shelf 320 mm deep 450 BR 455 32 167 587 216 271 303 604 - -
500 BR 505 32 173 610 226 277 316 633 - -
for installing individually in niche area. 600 BR 605 32 175 633 231 291 327 702 - -
50 mm thick
800 BR 805 32 186 665 241 316 345 831 - -
Order shelf support ZN 850.. separately 900 BR 905 32 190 696 244 328 361 896 - -
Special depths between 320 and 191 mm 1000 BR 1005 32 201 738 263 355 380 957 - -
are available on request at no extra
charge
Light slots not possible
Shelf 320 mm deep BR 2605 32 361 1258 467 560 652 1345 - -
same as above, but
width variable: from 220 mm to
max. 2600 mm
per metre
5.23
5.24
Worktops of Ceramic
6. Worktops/niches
Worktops/
Colour matrix
Worktops/
Worktops PS, PA
Desk panels
Colour code
Colour code
Material thickness (mm) 16 40 75 78 16 25 50 16
Worktop alpine oak-effect No. 614 l l l l l No. 614 l l l l
surface: Colours
anthracite grey No. 193 l l l l l No. 193 l l l l
aqua metal No. 602 l l l l l No. 602 l l l l
Arizona pine-effect No. 642 l l l l l No. 642 l l l l
canyon No. 643 l l l l l No. 643 l l l l
carbon oak-effect No. 159 l l l l l No. 859 l l l l
castell oak-effect No. P79 l l l l l No. P79 l l l l
oak-effect cashmere grey No. 127 l l l l l No. 127 l l l l
natural oak-effect No. 173 l l l l l No. 173 l l l l
fango No. 180 l l l l l No. 180 l l l l
ferro bronze No. 621 l l l l l No. 621 l l l l
ferro titanium No. 622 l l l l l No. 622 l l l l
graphite No. 123 l l l l l No. 123 l l l l
light grey No. 179 l l l l l No. 179 l l l l
end-grained wood oak effect No. 637 l l l l l No. 637 l l l l
cashmere No. 190 l l l l l No. 190 l l l l
Katthult pine-effect No. 134 l l l l l No. 134 l l l l
lava grey, stone structure No. P27 l l l l l No. P27 l l l l
magnolia white No. 148 l l l l l No. 148 l l l l
Manhattan grey No. 111 l l l l l No. 811 l l l l
marble carrara white No. 605 l l l l l No. 605 l l l l
marble mocha black No. 632 l l l l l No. 632 l l l l
marble truffle No. 660 l l l l l No. 660 l l l l
oxide anthracite grey No. 696 l l l l l No. 696 l l l l
oxide concrete No. 631 l l l l l No. 631 l l l l
oxide light grey No. 600 l l l l l No. 600 l l l l
Sanremo oak-effect No. P78 l l l l l No. 158 l l l l
soapstone beige No. P32 l l l l l No. P32 l l l l
stone oak-effect No. 135 l l l l l No. 135 l l l l
travertine grey No. 624 l l l l l No. 624 l l l l
elm-effect caramel No. 657 l l l l l No. 657 l l l l
ultra white No. 128 l l l l l No. 128 l l l l
vintage oak-effect No. 166 l l l l l No. 166 l l l l
walnut-effect No. 194 l l l l l No. 194 l l l l
white No. 101 l l l l l No. 101 l l l l
Other matt aluminium-effect No. 198 l No. 198
colours and
finishes
stainless steel-effect No. 199 l No. 199 l
Item
Colours and finishes see colour matrix
width mm
universal
hinge
PS
Approx. 40 mm thick, with slightly rounded laminate edge with same
finish as surface on front edge and both returns.
For angled cuts and corner cutouts the inside corners are manufac-
tured with a radius of 40 mm, the outside corner will be made with a
30 mm radius.
Connections to tall units will be square. Worktop joints and angled cuts
less than 70 x 70 mm and corner cut-outs less than 120 mm will be
square.
The order must state clearly if either more or fewer rounded corners
are required.
Colour finishes: in all laminate worktop surface colours (see section
Summary of worktop finishes).
Standard corner joints are included in the price of the worktops: 6.01
Joints in 90° range, for corner worktops, set-forward units or worktop extensions.
Item
Colours and finishes see colour matrix
width mm
universal
hinge
Corner worktop full corner depth 900 PS 90 49 A 478
for corner base units and corner sink base units
900x900 mm
6.02 Standard corner joints are included in the price of the worktops:
Joints in 90° range, for corner worktops, set-forward units or worktop extensions.
Item
Colours and finishes see colour matrix
width mm
universal
hinge
PA
Worktop 40 mm thick, with slightly rounded Magic- or contrasting
edge on one front edge and both returns.
Colour finishes: in all laminate worktop surface colours (see section
Summary of worktop finishes)
Edging strip finishes:
stainless steel/laminate no. 690
Lava grey, stone structure edging strip with stainless steel-effect
no. 205
Standard corner joints are included in the price of the worktops: 6.03
Joints in 90° range, for corner worktops, set-forward units or worktop extensions.
Item
Colours and finishes see colour matrix
width mm
universal
hinge
Surcharge AUS 82 118
Angled cut for end shelf
6.04 Standard corner joints are included in the price of the worktops:
Joints in 90° range, for corner worktops, set-forward units or worktop extensions.
Item
Colours and finishes see colour matrix
width mm
universal
hinge
Desk worktop for base units per metre PPS 89 832
sandwich construction to 78 mm thickness
360 to 895 mm deep
max. length 3500 mm
min. length 150 mm
All edges all around edge in finish as worktop surface.
Only available for 90° connection. Total weight per m² approx. 33 kg.
6.05
Item
width mm
universal
hinge
Worktop surface material PBL 1200 98
0.8 to 1.0 mm thick
depending on colour and no.
3600 x 1250 mm
per m²
Corner cutout with edging for PS/P worktops AUS 4000 136
for PA AUS 4100 144
for 3 D units etc.
acc. to drawing
Supplement per cutout
Rounded corner with edging for PS/P worktops AUS 7000 108
acc. to drawing
Surcharge per rounding
min. radius 30 mm
6.06
Item
width mm
universal
hinge
Rounded corner with edging for PA AUS 7010 220
acc. to drawing
Surcharge per rounding
minimum radius:
200 mm for PA
6.07
6.08
The metal strips MZA should additionally be ordered for stability with unit widths greater than 600 mm. However, visible
sagging of the worktop can still occur under heavy point loads.
Dresser units must not be used on top of 16 mm thick worktops.
Breakfast bars, fixed tables and self-supporting overhangs are not possible.
The larger planning dimensions should be taken into account with the niche systems.
STARLINE tall units with partly cut-out visible side: when planning the continuation from the tall unit to the base unit with a
continuous recessed grip, please note that the worktop on top of the base units must be at least 20 mm thick to cover the
continuous recessed grip slot in the tall unit. 16 mm thick worktops are not possible in this planning option with a visible
side. Remember to include modular panels for the transition from the tall units to the base units when using 16 mm thick
worktops.
UHS 60 1
Purpose-designed unit models with a top panel should be planned as cooker units.
Hobs can be used for 60 cm cooker units with a 560 mm wide cut-out size. Installation kit MZA 16 H should be used when
fitting these.
Hobs greater than 600 mm require correspondingly wide units and installation kit MZA 16 S should be used when fitting
them.
Drawers cannot be positioned below hobs.
It is not possible to fit the heat-protection shelf under the hob. If hobs are not fitted into existing cooker and hob units a
contact guard (top and inner panel) in carcase material should be ordered.
When fitting please note the installation instructions and fitting depths indicated by the electrical appliance manufacturers.
6.09
Item
Colours and finishes see colour matrix
width mm
universal
hinge
PS 16 mm thick
Panel 16 mm thick, with slightly rounded edge on all lengthways and
front edges. Surface lined with high-quality laminate on both sides,
bottom white.
6.10
Item
Colours and finishes see colour matrix
width mm
universal
hinge
Corner worktop full corner depth 1050 PS 105 19 A 591
for cooker or sink corner solution
1050x1050 mm
Corner cutout with edging for PS/P worktops AUS 4016 148
acc. to drawing
Supplement per cutout
Rounded corner with edging for PS/P worktops AUS 7016 120
acc. to drawing
Surcharge per rounding
min. radius 30 mm
6.11
Item
Colours and finishes see colour matrix
width mm
universal
hinge
Surcharge for PS AUS 8616 74
Angled cut for end shelf
6.12
Item
Colours and finishes see colour matrix
width mm
universal
hinge
PA
Worktop 16 mm thick, with slightly rounded magic edge
on one front edge and both returns.
Surface lined with high-quality laminate on both sides, bottom white.
Edging strip finishes:
stainless steel/laminate no. 690
6.13
Item
Colours and finishes see colour matrix
width mm
universal
hinge
Worktop 640 mm deep PA 16 R 274
for free-standing base units
max. length 3450 mm
min. length 50 mm
both lengthways and front edges with edging
per metre
6.14
Item
Colours and finishes see colour matrix
width mm
universal
hinge
Surcharge for PA AUS 8216 74
Angled cut for end shelf
consisting of:
2 end caps left
2 end caps right
4 internal corners 90°
2 external corners 90°
2 internal corners 135°
6.15
Item
width mm
universal
hinge
Mini sealer strip 2000 LWM 200 63
4000 LWM 400 87
With double-sided adhesive tape for wall attachment, accessories
pack LWM 1 per order
14 mm high, 14 mm deep
Colour finish:
matt aluminium effect no. 198
stainless steel effect no. 199
consisting of:
2 end caps left
2 end caps right
4 internal corners 90°
2 external corners 90°
2 internal corners 135°
6.16
Worktops of Ceramic
Ceramic material is ideal for kitchens. The elegant and simple ambience permits an almost unlimited variety of planning options.
This exclusive range offers a large selection of colours for worktops, niche back panels and desk panels.
Even ALNOCERA / ALNOSTAR CERA kitchens can be perfectly planned down to the very last detail and tone-in-tone with worktops and
niche back panels made of this material.
Worktop colours:
6.17
Ceramic material provides all the good properties you could wish for from a worktop and is a 100% natural product.
Due to its composition, worktops of Ceramic is completely resistant to UV light and can be recycled.
The material is also extremely heat-resistant. we recommend to use a suitable coaster to put down hot pots and pans to avoid
cracking or colour changes, which can be caused by thermic shock situations.
The surface is extremely resistant to acids. Aggressive substances have no effect on it. Ceramic is easily cleaned with standard
household cleaners.
The 5 mm thick niche back panel bridges the area between wall and
base units almost invisibly.
Holes can be drilled for socket outlets, railings or other design ele-
ments. Good measurement helps you to specify this in exactly the right
position in your order.
Angled cuts and cutouts can be provided here in just the same way as
they can in the worktops and produce a precision fit.
Enjoy the advantages created by purchasing the kitchen and worktop from a single source.
6.18
Product information
- Ceramic material contains natural differences in colour and texture.
- Different lots may differ when ordering additional items made from
this natural product.
- These differences in colour and texture are production-related and
not covered by our warranty.
Order information
- All cutouts in the worktop must be ordered with the worktop. Remember to include holes for the mixer tap, as well as all other
cutouts and angled cuts.
- In your ordering information include all finishing work to edges at the end of a row of units, connections to tall units or visible
rear edges.
- A drawing with specific dimensions is required when ordering.
- Cutouts must be placed at least 65 mm from the outside edge.
- In addition to the appliance data, we also require the cutout dimensions for hobs and sinks made by other manufacturers.
- For flush-mounted inset sinks and hobs, the manufacturer‘s drawings showing the rebate depth and supported edge must be
enclosed with the order.
- For the 18 mm thick ceramic worktop we recommend a strip for stabilization (MZA..) for units larger than 600 mm to avoid a
buckling trough at high load levels.
Please note:
The worktops can only be worked on site by properly trained personnel using special abrasive wheels and drills.
Due to their weight of 21 - 33 kg/m², the worktops can only be carried by a sufficient number of people. Plan for additional helpers,
both to receive delivery from ALNO and for transport to, as well as assembly in your customer‘s premises.
6.19
Item
width mm
universal
hinge
Ceramic worktop up to 400 mm deep PC 24 1408
18
up to 600 mm deep PC 26 1921
Panel 18 mm thick up to 650 mm deep PC 27 2096
ceramic lining and bevelled edge on one longitudinal edge,
on base structure. up to 750 mm deep PC 28 2271
max. length 3200 mm up to 900 mm deep PC 29 2621
up to 1200 mm deep PC 22 3320
per metre
Angled cut for corner connection for ceramic worktop AUS 35 C 593
45° corner solution
acc. to drawing
without fittings
U-shaped corner cutout for ceramic worktop without edge AUS 644 C 376
Supplement per cutout
6.20
Item
width mm
universal
hinge
cuttings for uneven walls for ceramic worktop AUS 67 C 376
acc. to drawing
Supplement per cutout
Cutout for top-mounted hob and sink for ceramic worktop AUS 16 C 800
per item
Cutout for flush-mounted sink and hob for ceramic worktop AUS 26 FC 1000
per item
Hole in worktop and niche for ceramic worktop drill hole dia. 6-20 mm AUS 20 C 64
drill hole dia. 21-65 mm AUS 65 C 196
Drill hole for mixer tap, eccentric etc. drill hole dia. 66-100 mm AUS 100 C 263
acc. to drawing drill hole dia. 101-150 mm AUS 150 C 330
drill hole dia. 151-200 mm AUS 200 C 397
Minimum distance between outer edge and drill hole: 50 mm
Minimum distance between drilling 30 mm
6.21
Item
width mm
universal
hinge
Ceramic niche back panel NC 00 V 1991
Back panel 5 mm thick
max. length 3200 mm
The edge is bevelled
per m²
Angled cut for Ceramic niche back panel with edge AUS 3 NC 297
acc. to drawing
Surcharge per angled cut
Corner cutout for Ceramic niche back panel with edge AUS 4 NC 453
acc. to drawing
Inside radius 10 mm
Supplement per cutout
6.22
Item
width mm
universal
hinge
drilling in the niche back panel in ceramic drill hole dia. 6-20 mm AUS 20 C 64
drill hole dia. 21-65 mm AUS 65 C 196
Drill hole for mixer tap, eccentric etc. drill hole dia. 66-100 mm AUS 100 C 263
acc. to drawing drill hole dia. 101-150 mm AUS 150 C 330
drill hole dia. 151-200 mm AUS 200 C 397
Minimum distance between outer edge and drill hole: 30 mm
Minimum distance between drill holes 12 mm
6.23
Item
width mm
universal
hinge
427 Inset sink BLANCO SUBLINE 400-F anthracite grey 427 ZSL 427 AG 1102
bowl 400 x 400 x 190 mm
Basin height incl. outlet fitting 313 mm
400
427
400 13.5
Only possible in combination with ceramic
worktops!
fitting: inset-mounted, under-mounted,
flush-mounted possible
527 Inset sink BLANCO SUBLINE 500-F anthracite grey 527 ZSL 527 AG 1152
Basin 500 x 400 x 190 mm
Basin height incl. outlet fitting 312 mm
400
427
R1 400 20 Inset sink BLANCO ANDANO 400-IF stainless steel 440 ZSL 4401 E 1655
2
bowl 400 x 400 x 190 mm
Basin height incl. outlet fitting 290 mm
drainage fitting with 3 1/2 „ strainer valve
400
400
R
corner radius 22 mm
22
Inset sink BLANCO ANDANO 500-IF stainless steel 540 ZSL 5401 E 1787
500 20
R1
corner radius 22 mm
R
22
540
Franke inset sink Box BXX 210-50 A stainless steel 530 ZSL 530 E 1620
SlimTop
Basin 500 x 410 x 200 mm with integral
63
7 tap ledge with 2 drill holes
Basin height incl. outlet fitting 295 mm
integral strainer as push-button pop-up
500 flush
corner radius 13 mm
(600 mm sink base unit)
6.24
Item
width mm
universal
hinge
Franke inset sink stainless steel 540 ZSL 540 E 1265
Box BXX 210-50/110-50
Basin 500 x 410 x 200 mm
integral strainer as push-button pop-up
corner radius 13 mm
(600 mm sink base unit)
6.25
6.26
Please note that for edge joins, the finishes are not * Worktop finishes with the same colour number as
continuous, but are offset. laminate finish are supplied in laminate finish.
high-gloss lacquer
Item
Colours and finishes see colour matrix
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Niche back panel Niche height NR 48 01 F 123 397 145 231 - - 334 -
470 - 575 mm
only in combination with: Combined work- Niche height NR 61 01 F 142 493 175 263 - - 417 -
top sealer strip LG 200/400 at bottom 600 - 705 mm
Retaining profile LH 200/400 is required
for use under wall units.
min. width: 100 mm
per metre
Niche back panel Grain direction horizontal NR 250 01 F 230 1185 319 359 - - 882 -
pattern vertical NR 250 01 FS 230 1185 319 359 - - 882 -
Variable in height and width
Maximum dimensions:
Finish and gloss laminate
horizontal:
2600 mm long and 1600 mm high
vertical:
1600 mm long and 2600 mm high
Finish in Worktop and laminate finish
horizontal:
2600 mm long and 1200 mm high
vertical:
1200 mm long and 2600 mm high
Veneered finish
horizontal:
2600 mm long and 1000 mm high
vertical:
1000 mm long and 2600 mm high
Finish in metal effect
horizontal:
2600 mm long and 1000 mm high
vertical:
1000 mm long and 2600 mm high only in
combination with: Combined work-
top sealer strip LG 200/400 at bottom
6.27
Item
width mm
universal
hinge
Glass niche back panel per m² NG V 1022
safety glass panel 6 mm thick
The glass edges are chamfered and ground.
Variable in height and width
max. length 2500 mm
Max. height 1250 mm
Minimum measurement:
- Without processing 300 x 80 mm or 80 x 300 mm
- With processing 500 x 200 mm or 200 x 500 mm
Colour finish:
glass green no. 524
graphite no. 511
light grey No. 584
cashmere no. 553
magnolia white no. 521
black no. 519
ultra white no. 536
white no. 518
6.28
Item
width mm
universal
hinge
Glass niche back panel ALNO gallery per metre NG VD 588
safety glass panel 6 mm thick
The glass edges are chamfered and ground.
300 - 575 mm high
variable in width
from 300 to 2600 mm
Motif can be continued up to 3600 mm without interruption in adjacent
glass niches or 90° internal corners.
Choice of motifs: see overview
(Summary of ranges / glass types)
Glass niche back panel for motif and gallery per m² NG VDV 1022
6.29
high-gloss lacquer
Item
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Cutout for switch/socket for NG V Hole dia. 68 mm AUS 1S G - - - - - - - 157
Dimensions apply up to middle of hole
Minimum distance between outer edge
and middle of drill hole: 68 mm
6.30
Item
width mm
universal
hinge
Combined sealer strip 2000 LG 200 55
4000 LG 400 108
24 mm high, 30 mm deep
basic profile to receive niche walls or cover profiles incl.
1 accessory set LGZ 1, per order
Colour finish:
matt aluminium effect no. 198
stainless steel effect no. 199
6.31
high-gloss lacquer
Item
Colours and finishes see colour matrix
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Corner back panel for cooker hoods per metre 960 RW 96 235 917 309 407 - - 679 -
for corner solution 1050 x 1050 mm for
blind corner 679 x 679 mm
incl. side sealer strips in matt aluminium
effect
height adjustable
Max. height 1850 mm
for max. room height 2600 mm
min. 1000 mm
Useable worktop depth 680 mm
Corner back panel per metre 1118 RW 112 263 - 340 454 - - 768 -
for corner solution 1050 x 1050 mm for
blind corner 791 x 791 mm
in combination with 600 mm light baffle
cover or wall unit incl. matt aluminium-
effect side sealer strips, height-adjustable
Max. height 1850 mm
for max. room height 2600 mm
min. 1000 mm
Useable worktop depth 600 mm
6.32
Plinth panels
7. Plinth/cornice/
light baffle
Plinth panels
Plinth panels
Plinth panels
Plinth panels
Colour code
Colour code
Laminate anthracite grey No. 193 Matt lacquer anthracite grey matt No. 493
oak-effect cashmere grey No. 127 fango matt No. 480
natural oak-effect No. 173 graphite matt No. 423
fango No. 180 Manhattan grey matt No. 411
graphite No. 123 light grey matt No. 479
light grey No. 179 cashmere matt No. 490
cashmere No. 190 lime green matt (1) No. 463
Katthult pine-effect No. 134 magnolia white matt No. 448
magnolia white No. 148 marsala red matt (1) No. 470
Sanremo oak-effect No. 158 platinum blue matt No. 465
ultra white No. 128 black matt (1) No. 410
walnut-effect No. 194 emerald green matt No. 455
white No. 101 steel blue matt (1) No. 486
Real wood old oak natural No. 375 deep blue matt No. 472
old oak smoke grey No. 331 ultra white matt No. 428
old oak reddish brown No. 338 white matt No. 401
carbon oak No. 359 NCS or RAL colour matt (3) No. 499
walnut No. 303 Textured lacquer anthracite grey textured No. 693
Gloss laminate graphite gloss No. 923
gloss fango No. 980
fango textured No. 680
light grey gloss No. 979
graphite textured No. 623
gloss cashmere No. 990
Manhattan grey textured (2) No. 611
gloss magnolia white No. 948
light grey textured No. 679
gloss ultra white No. 928
cashmere textured No. 603
gloss white No. 901
lime green textured No. 663
Laminate carbon oak-effect No. 859 magnolia white textured No. 648
ferro bronze No. 621 marsala red textured No. 670
ferro titanium No. 622 platinum blue textured (1) No. 665
Manhattan grey No. 811 black textured No. 610
lava grey, stone structure No. emerald green textured
structure (1) No. 655
marble truffle No. 660 steel blue textured No. 686
oxide anthracite grey No. 696 deep blue textured (1) No. 672
oxide concrete No. 631 ultra white textured No. 628
oxide light grey No. 600 white textured No. 601
NCS or RAL colour textured No. 649
High-gloss lacquer high-gloss graphite No. 523
high-gloss light grey No. 579
high-gloss cashmere No. 590
high-gloss magnolia white No. 548
high-gloss ultra white No. 528
high-gloss white No. 501
NCS or RAL colour high-gloss (1) No. 599
high-gloss lacquer
Item
Colours and finishes see colour matrix
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Plinth panel 7 mm thick incl. in unit price SO 300 0 126 55 63 67 116 81 -
for additional order SO 300 B 29 168 78 89 87 140 103 -
max. length 3200 mm
min. length 50 mm
Standard heights: 105, 130, 155, 180,
205 mm
Bottom edge with sealing profile
per metre
Front plinth panel for 3-D units incl. in unit price 450 SOV 40 0 47 22 26 26 48 32 -
for additional order 450 SOV 40 B 7 62 30 34 32 57 42 -
with corner profiles for base or tall units
Plinth panel for open end shelf unit incl. in unit price SOA 5 0 109 52 60 55 99 70 -
for additional order SOA 5 B 16 143 70 81 74 123 87 -
with corner profiles
Plinth panel for base unit for oven with incl. in unit price 445 SOH 60 0 150 70 81 78 140 98 -
plinth container for additional order 445 SOH 60 B 26 198 94 108 103 167 122 -
with corner profiles for fitting in the
kitchen
Plinth panel for base unit for oven with incl. in unit price 696 SOH 135 0 173 81 93 90 163 114 -
plinth container for additional order 696 SOH 135 B 30 230 112 129 118 192 144 -
with corner profiles for 135° corner
installation
7.01
high-gloss lacquer
Item
Colours and finishes see colour matrix
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Altered plinth height SSH 1 - - - - - - - 30
Supplement for intermediate plinth
heights between 50 and 205 mm non-
standard height.
The recommended min. plinth height
for pull-out tables and dishwashers is
105 mm.
Surcharge per plinth panel
Plinth drawer 600 SOK 60 194 436 264 281 270 340 291 -
can only be fitted on site below 600 mm
wide units from 150 mm high plinth
depth 400 mm
Actual size: 70 mm high, 410 mm wide,
on runners in brilliant white with corner
profiles
incl. plinth panel and handle 132.
Plinth panel 600 SOKV 60 42 230 112 129 118 188 140 -
for plinth drawer
for separate plinth
Plinth ladder 475 SOL 60 361 658 430 445 449 516 460 -
can only be built in on site under 600 mm
units
step height 352 mm
2 fold-out steps
plinth height: min. 105 mm
incl. plinth panel
Plinth panel 475 SOLV 60 32 215 103 118 112 177 133 -
for plinth ladder
for separate plinth
Plinth recessed at the side from 300 mm unit width 575 MZS 60 - - - - - - - 170
over 80 cm unit width 1175 MZS 120 - - - - - - - 204
Stabilizing rail and to support the carcase
side
if plinth foot is installed
further to the inside.
7.02
high-gloss lacquer
Item
Colour finish: stainless steel effect No. 199 and
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
high-gloss chrome effect No. 196
width mm
Laminate
universal
veneer/
hinge
finish
Plinth panel incl. in unit price SL 300 - - - - - - 81 -
for additional order SL 300 B - - - - - - 103 -
13 mm thick
max. length 3150 mm
min. length 50 mm
Standard heights: 105, 130, 155, 180,
205 mm
Bottom edge with sealing profile
per metre
Front plinth panel for 3-D units incl. in unit price 450 SLV 40 - - - - - - 32 -
for additional order 450 SLV 40 B - - - - - - 42 -
with corner profiles for base or tall units
Plinth panel for open end shelf unit incl. in unit price SLA 5 - - - - - - 70 -
for additional order SLA 5 B - - - - - - 87 -
with corner profiles
Plinth panel for base unit for oven with incl. in unit price 445 SLH 60 - - - - - - 98 -
plinth container for additional order 445 SLH 60 B - - - - - - 122 -
with corner profiles for fitting in the
kitchen
Plinth panel for base unit for oven with incl. in unit price 696 SLH 135 - - - - - - 114 -
plinth container for additional order 696 SLH 135 B - - - - - - 144 -
with corner profiles for 135° corner
installation
7.03
high-gloss lacquer
Item
Colour finish: stainless steel effect No. 199 and
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
high-gloss chrome effect No. 196
width mm
Laminate
universal
veneer/
hinge
finish
Altered plinth height SSH 1 - - - - - - - 30
Supplement for intermediate plinth
heights between 50 and 205 mm non-
standard height.
The recommended min. plinth height
for pull-out tables and dishwashers is
105 mm.
Surcharge per plinth panel
7.04
Cornices/light baffles/
cornices/ceiling infills
flyover shelves for
cornices/ceiling infills
flyover shelves for
Colour code
Ceiling infill
Ceiling infill
42 16 42 16
Material thickness (mm) 16 Material thickness (mm) 16
54 32 54 32
Laminate anthracite grey No. 193 Matt lacquer anthracite grey matt No. 493
oak-effect cashmere grey No. 127 fango matt No. 480
natural oak-effect No. 173 graphite matt No. 423
fango No. 180 Manhattan grey matt No. 411
graphite No. 123 light grey matt No. 479
light grey No. 179 cashmere matt No. 490
cashmere No. 190 lime green matt (1) No. 463
Katthult pine-effect No. 134 magnolia white matt No. 448
magnolia white No. 148 marsala red matt (1) No. 470
Sanremo oak-effect No. 158 platinum blue matt No. 465
ultra white No. 128 black matt (1) No. 410
walnut-effect No. 194 emerald green matt No. 455
white No. 101 steel blue matt (1) No. 486
Real wood old oak natural No. 375 deep blue matt No. 472
old oak smoke grey No. 331 ultra white matt No. 428
old oak reddish brown No. 338 white matt No. 401
carbon oak No. 359 NCS or RAL colour matt (3)No. 499
walnut No. 303 Textured lacquer anthracite grey textured No. 693
Gloss laminate graphite gloss No. 923
gloss fango No. 980
fango textured No. 680
light grey gloss No. 979
graphite textured No. 623
gloss cashmere No. 990
No. 611
Manhattan grey textured (2)
gloss magnolia white No. 948
light grey textured No. 679
gloss ultra white No. 928
cashmere textured No. 603
gloss white No. 901 lime green textured No. 663
High-gloss lacquer high-gloss graphite No. 523
magnolia white textured No. 648
high-gloss light grey No. 579
marsala red textured No. 670
high-gloss cashmere No. 590
platinum blue textured (1) No. 665
high-gloss magnolia white No. 548
black textured No. 610
high-gloss ultra white No. 528
structure (1)No. 655
emerald green textured
high-gloss white No. 501
steel blue textured No. 686
NCS /orRAL
RALcolour high-glossNo.
colourhigh-gloss (1) 599
deep blue textured (1) No. 672
Metal effect
ultra white textured No. 628
stainless steel-effect No. 199 white textured No. 601
NCS / RAL colour textured No. 649
high-gloss lacquer
Item
Colours and finishes see colour matrix
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Light baffle per metre L 70 133 200 - - 148 418 - -
Price incl. mitred cuts
Mitred manufacture according to drawing
Maximum length without join 3500 mm
Minimum length without join 50 mm
7.05
high-gloss lacquer
Item
Colours and finishes see colour matrix
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Light baffle Country-house style antico per metre L 90 - - - - 144 - - -
43 mm high
Maximum length without join 3500 mm
Minimum length without join 50 mm
7.06
high-gloss lacquer
Item
Colours and finishes see colour matrix
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Cornice Country-house style antico per metre K 90 - - - - 201 - - -
external corners glued
90 mm high
Maximum length without join 3500 mm
Minimum length without join 50 mm
Flyover shelf for cornice for carcase depth 350 mm GB 3 Z 81 404 - - 210 339 - -
per metre
for bridging gaps f. carcase depth GB 5 Z 114 524 - - 271 441 - -
(e.g. above a canopy hood or window) 560 mm, per metre
max. length 2600 mm
min. length 50 mm
Depending on the planning situation,
additions for mitred cuts and tops are
necessary. Flyover shelf and cornice are
delivered separately.
Flyover shelf for cornice for carcase depth 350 mm GB 3 81 404 - - 210 339 - -
per metre
can be used to cover tall units, wall units, f. carcase depth GB 5 114 524 - - 271 441 - -
shelves and gaps and as a breakfast bar 560 mm, per metre
shelf.
max. length 2600 mm
min. length 50 mm
Supplied ready glued. Depending on the
planning situation, additions for mitred
cuts and tops are necessary.
7.07
high-gloss lacquer
Item
Colours and finishes see colour matrix
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Surcharge for angled cuts KGV 1000 - - - - - - - 118
for corner cutouts KGV 2000 - - - - - - - 144
not possible in connection with GB 3Z/5Z!
Ceiling infill panel 40 - 300 mm high per DB 300 33 257 57 - 152 203 183 -
metre
Maximum length 2600 mm
Minimum length 50 mm
A ventilation shaft with 200 cm2 cross-
section is needed for floor-to-ceiling
panelling above appliance housings.
The worktop ventilation grill is used for
this purpose.
Ceiling infill for corner unit 40 - 300 mm high DV 135 22 138 38 - 90 115 108 -
for 135° solutions
mitred on site
Ceiling infill panel for angled wall end 40 - 300 mm high DA 3 27 189 43 - 122 156 144 -
shelf
mitred on site
Ceiling infill panel for angled tall end 40 - 300 mm high DA 5 31 204 47 - 130 164 156 -
shelf
mitred on site
7.08
A78 ATTRACT
A78 ALNOSPACE
S78 MARECUCINA
8. Design elements/
special issues
A78
The country-house style stands for a wealth of different design versions with richly detailed furniture elements.
Warmth and cosiness, natural and authentic styles are becoming ever more important.
For the antico country-house style, we have compiled a special range of ALNOBRIT fronts, handles, cornices, flyover shelves, light
baffles, pilasters, open shelf units, cooker hoods etc. that are ideal for creating this kitchen style.
Planning hints:
Wall units of different height cannot be planned next to each other.
Pilasters should be planned symmetrically, i.e. either side of the units
where possible.
Pilasters have only one closed side.
Pilasters can either be supplied in carcase height or with the suitable
plinth element, unit height.
Doors:
Colour and finish of antico country kitchen elements included in the price:
Magnolia white textured No. 648
8.01
Order the antico country kitchen elements for all colours (apart from magnolia white textured) with the NCS colour code.
For custom lacquer finish we charge the same surcharge as for for country-style accessories MPLACKL.
Colours and finishes of antico country kitchen elements with surcharge MPLACKL:
ultra white textured No. 628 steel blue textured No. 686
white textured No. 601 deep blue textured No. 672
cashmere textured No. 603 light grey textured No. 679
fango textured No. 680 Manhattan grey textured No. 628
marsala red textured No. 670 anthracite grey textured No. 693
lime green textured No. 663 graphite textured No. 623
emerald green structure No. 655 black textured No. 610
platinum blue textured No. 665 NCS or RAL colour textured No. 649
Different materials for front and accessories may result in metamerism differences.
8.02
Item
width mm
universal
hinge
Colour finishes country-house style antico
Colour
Magnolia white textured No. 648
8.03
Item
width mm
universal
hinge
Cooker hood 780 mm high for 900 DHL 90 91 1 3099
unit height 910 mm
max. cutout size (W x D): 650 mm high for 900 DHL 90 78 1 3030
830 x 280 mm or 800 x 380 mm unit height 780 mm
500 mm deep 520 mm high for 900 DHL 90 65 1 2960
unit height 650 mm
8.04
Item
width mm
universal
hinge
Tall end shelf unit 300 SRAL 30 208 L/R 2512
5 fixed shelves
580 mm deep
2080 mm high
8.05
Item
width mm
universal
hinge
Pilaster for wall unit 910 mm high 50 PILO 91 415
780 mm high 50 PILO 78 395
380 mm deep 650 mm high 50 PILO 65 368
8.06
Item
width mm
universal
hinge
Cornice Country-house style antico per metre K 90 201
external corners glued
90 mm high
Maximum length without join 3500 mm
Minimum length without join 50 mm
8.07
8.08
ATTRACT
A78
A78
ALNOATTRACT
ALNOATTRACT is a perfect symbiosis of simple pragmatism and emotio appealing details such as the accented rib structures, the ALNOATTRACT
nal appeal. It picks up on the latest design trends by playing creatively captivates the observer above all through its visual perfection.
with projections, breaks and offsets.
In the ALNOATTRACT designer line, shapes and colours combine differ
At the same time, ALNO remains true to tried and tested materials such ent styles. Right through to the accessories, the kitchen is a combina
as oak, smoke glass and metal. The new elements defer with respect tion of elements from the ALNOATTRACT, ALNOSTRUCT as well as the
to those already in existence – creating a harmonious sense of space ALNOFINE and ALNOSUND lines, and finished in lacquer, veneer and
with individual character. Thanks to the great amount of attention paid to metallic lacquer effect.
ALNOATTRACT
Front thickness: 20 mm
No. 426 metallic bronze No. 427 metallic grey cast iron
8.09
ALNOATTRACT product information
Design concept
❻
❻
➋
➊ ➋
➍
➎
❸ ➊
❸
8.10
ALNOATTRACT product information
■ The island end unit is available in a width of 1000 mm and two front ■ The endofrow unit can be fitted at the left or righthand end where it
layouts. Plan this unit to be positioned at the end face of an island. sets a clear signal. The plinth panel is set back by the same distance
The side panelling forms distinctive 3D contours with depth effect at the front and side so as to create any corners to distract the eye.
at the point of transition to the standard base units featured behind.
■ Backtoback base units in a depth of 560 mm let you configure
These are set flush with the carcase. 560 mm and 410 mm deep base
islands in a depth of 1200 mm. An endofrow base unit can be
units stand 30 mm apart back to back to pick up on the lines of the
included at the end of either side of the island. At the end faces, the
island end unit.
angled contours of the side panelling meet an emphasised reveal to
■ We recommend leaving worktops flush with the front. When configuring give ALNOATTRACT a distinctive design element.
an island, this requires a worktop in a depth of 1050 mm and on a row
of units in a depth of 585 mm.
■ The units are always without handles and handle drilling and the
drawers are only available with mechanical TipOn.
The island and end-of-row unit is available in both ALNOATTRACT colours as well as in all front colours of ALNOFINE and ALNOSUND:
ultra white white magnolia white cashmere fango marsala red lime green emerald green platinum blue
steel blue deep blue light grey Manhattan grey anthracite grey graphite black NCS or RAL
ochre smoked mint my green pond green quartz grey smoked pink chocolate gentian blue electric blue
NCS S 2040Y20R NCS S 1510G NCS S 3050G40Y NCS S 8010G50Y NCS S 7502Y NCS S 2020Y80R NCS S 8010Y70R NCS S 3560R80B NCS S 3060B
8.11
ALNOATTRACT product information
■■ Glass display units and wall units with ribbed glass door are the ■■ When planning around an outside corner with an end-of-row unit, the
visual highlight of an ALNOATTRACT kitchen. The units must be side ribbed glass door becomes the front edge flush with the front of
ordered from the ALNOSTRUCT line and are available in all three front further units.
colours. ■■ The insides and outsides of the units are in anthracite grey No. 193.
■■ A handle would only distract on the ribbed glass doors. We always ■■ To give the soft interior designs additional emphasis, the units are
provide the units with a hole-mounted Tip-On fitting. always provided with a milled channel for linear LED lights in the top
■■ The most challenging element is doubtlessly the corner unit with panel. This adds greater emphasis to the defined depth of the ribs
ribbed glass door. In the form of glass display unit and wall unit, and the anthracite grey of the inside and makes them visible on the
the cabinet is a real looker as an end-of-row unit. A ribbed glass outside.
door is fitted at the side in fixed position as well as at the front with ■■ We recommend leaving cover panels or worktops flush with the front.
Tip-On for opening. A unit with left-hinged ribbed glass door is fea The ribs as well as the black cover profile on them then project
tured on the left-hand outer side. The plinth under the glass display 15 mm beyond the front and into the room. Only a projection of
unit is set back on the outer side. This permits unrestricted further 40 mm from the carcase completely conceals the front along with
planning. The carcases are 4 mm wider as a result of the fixed- the ribs.
position ribbed glass door at the side.
8.12
ATTRACT
Item
textured lacquer
Metallic lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Angled open end shelf 300 ORE 30 39 A L/R - - - - - 3003 - -
390 mm high
Metallic lacquer finish
bronze metallic No. 795
metallic grey cast iron No. 796
Angled open end shelf 300 ORE 30 39 L/R 248 756 302 362 482 627 - -
390 mm high
Wall shelf unit 300 ORU 30 39 227 1116 344 413 529 894 - -
450 ORU 45 39 237 1181 368 442 547 1029 - -
390 mm high 500 ORU 50 39 239 1219 375 450 551 1076 - -
U-shaped, open at top
600 ORU 60 39 244 1263 391 469 560 1166 - -
For colours and versions, refer to 900 ORU 90 39 265 1386 441 529 592 1441 - -
colour matrix
variable in width ORU 00 39 V 372 1531 549 659 699 1547 - -
from 150 to 900 mm
8.13
Item
width mm
ATTRACT
SUND
hinge
FINE
Island end unit 1043 U3A 100 A 2866 4566
3 deep drawers
without handle
left and right with fixed front panels, fronts mitred
left and right with plinth recess
available in ALNOATTRACT No. 224:
bronze metallic No. 426
metallic grey cast iron No. 427
as well as in ALNOFINE and ALNOSUND
8.14
Item
width mm
universal
hinge
Wall unit with ribbed glass door 450 OG 45 91 A L/R 3947
500 OG 50 91 A L/R 4157
910 mm high 600 OG 60 91 A L/R 4430
1 ribbed glass door (Smoke glass No. 529) with Tip-On fitting
2 adjustable glass shelves
8.15
Item
width mm
universal
hinge
Display unit with ribbed glass door 450 VG 45 91 A L/R 3947
500 VG 50 91 A L/R 4157
910 mm high 600 VG 60 91 A L/R 4430
1 ribbed glass door (Smoke glass No. 529) with Tip-On fitting
2 adjustable glass shelves
Corner wall unit with ribbed glass door 454 OEG 45 91 A L/R 5642
604 OEG 60 91 A L/R 6124
910 mm high
1 ribbed glass door (Smoke glass No. 529) with Tip-On fitting
2 adjustable glass shelves
with fixed ribber glass door on door hanging side
Corner wall unit with ribbed glass door 454 OEG 45 78 A L/R 5517
604 OEG 60 78 A L/R 5972
780 mm high
1 ribbed glass door (Smoke glass No. 529) with Tip-On fitting
2 adjustable glass shelves
with fixed ribber glass door on door hanging side
Corner wall unit with ribbed glass door 454 OEG 45 65 A L/R 5394
604 OEG 60 65 A L/R 5821
650 mm high
1 ribbed glass door (Smoke glass No. 529) with Tip-On fitting
1 adjustable glass shelf
with fixed ribber glass door on door hanging side
Corner base unit Display unit with ribbed glass door 454 UEG 45 78 A L/R 5517
504 UEG 50 78 A L/R 5715
780 mm high 604 UEG 60 78 A L/R 5972
1 ribbed glass door (Smoke glass No. 529) with Tip-On fitting
2 adjustable glass shelves
with fixed ribber glass door on door hanging side
8.16
ALNOSPACE
A78
A78
Pocket doors
A78
A78
The kitchen is more and more part of the living space. People love open spaces that flow into each other and overlap.
The kitchen as a place of the common creation of luxury food shall not be noticed as a workplace anymore in the resting phases,
but as part of the living concept.
One does not want to see appliances like ovens, steam ovens, microwaves and coffee machines in the living area all the time.
The visible cupboard behind the kitchen island is a living area and not a working area.
Our pocket doors with full height fronts are hiding appliances which are usually visible. It creates a well-being and comfortable
athmosphere in the kitchen.
When the pocket doors are opened they will be parked in the pocket on the side. Therefore the tall units, or a working area with
base- and wall units are fully accessible. The parked doors are not in the way.
The full height pocket doors are available in the ranges ALNOPLAN, ALNODUR, ALNOFINE, ALNOSUND, ALNOSIGN, ALNOGRAND, ALNO-
CLASS and ALNOSTRUCT.
The vertical handle over the complete front height as an opening assistance can be selected in stainless steel- effect or aluminium
black. The inside surfaces are available in all panel colours.
The modular panels on the sides are available in all colours of our modular panels.
Almost endless variety of materials and colours lets the pocket doors disappear in a line perfectly.
Planning advice
The full height pocket doors are only available in carcase height 2080 mm. For a carcase depth of 680mm pocket doors the adjoining
units have to be pulled off the wall by 120 mm.
There are no special constructions possible. An overbuilding cannot be put on, because of the sliding mechanism at the top. The
pocket doors have to remain open during the operation of the appliances in open niches.
8.29
Order information
Pocket doors for tall units
Two 600 mm wide tall units can be planned in here. Including the left and right modular panels on the
sides you need a planning measure of 1417 mm. The modular panel in the middle acts as buffer for
the doors.
Trough the depth of 680 mm the tall units can be fitted either directly to the wall or flash at the front.
By using variousTip-On´s for hinged doors, drawers and deep drawers as well as servodrive for fridge
units it is possible to plan in handless behind the pocket doors. This makes the interior space to it´s
own precious area.
Planning examples
Open shelf units and shelves inside the The pocket doors may also conceal a diffe- Cooking and washing-up on minimal floor
pocket doors lighten up the look and rent front and colour finish. Unobtrusive or space can be concealed behind pocket
create homely charm. colourful; plain or decor – in any preferred doors. The same front finish both inside
way. Shelf units and cabinets with Tip-On and out creates a connected look for a
provide elegant convenience. sense of harmony.
8.30
high-gloss lacquer
Item
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Pocket door carcase for tall units 1417 PDSKP 142 208 D 7107 9340 7665 7620 7967 8802 - -
for carcase height 2080 mm
carcase depth 680 mm
Fitting of 2 tall units with carcase depth
560 mm
Consisting of:
2 internal panels with pocket door fittings
1 Modular panel
available in all panel colours
Pocket door carcase for base and wall 1392 PDUKP 139 208 D 6964 9098 7499 7469 7801 8651 - -
units
for carcase height 2080 mm
carcase depth 680 mm
planning dimension 1200 mm are
available
Consisting of:
2 internal panels with pocket door fittings
1 top shelf
available in all panel colours
End panel for pocket door 25 WSP 208 229 1073 372 472 556 818 - -
for carcase height 2080 mm + plinth
height
705 mm deep
With panel protector in stainless-steel
effect or black.
8.31
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Pocket doors for tall units PDS 142 208 D 1104 1324 - 1642 1884 - - 2680 4368
Set with 2 pocket doors to install tall units
560 mm deep
for carcase height 2080 mm
carcase depth 680 mm
Consisting of:
1 pocket door left door dimension
679 mm wide incl. handle
1 pocket door right door dimension
679 mm wide incl. handle
Pocket doors feature a vertical finger pull
with assisted opening in stainless-steel
effect or aluminium black. Carcase interi-
or available in all modular panel colours.
Pocket door for base and wall units PDU 139 208 D 1104 1324 - 1642 1884 - - 2680 4368
Set with 2 pocket doors to install base
and wall units
planning dimension 1200 mm are
available
for carcase height 2080 mm
carcase depth 680 mm
Consisting of:
1 pocket door left door dimension
666 mm wide incl. handle
1 pocket door right door dimension
666 mm wide incl. handle
Pocket doors feature a vertical finger pull
with assisted opening in stainless-steel
effect or aluminium black. Carcase interi-
or available in all modular panel colours.
8.32
Laundry room
A78
A78
Grandma‘s wash house still holds a nostalgic charm, even today. Laundry is no longer boiled. The rooms are no longer tiled right up to
the ceiling, and a drain in the floor is no longer state-of-the-art.
Our lives and homes are now very different. Due to rented and owner-occupied apartments in apartment buildings, washing, drying
and ironing is now done within the household. And newly build houses very rarely have a cellar. The wash house has become a
laundry room. And we have raised the bar – it now has to look as good and be as practical as our entire home. Beauty combined
with design, practical features with storage space, easy-to-clean surfaces with versatility and individuality. Our special range for the
laundry room combines all of these features.
“There is no room!“ We therefore create volume in the smallest of spaces. Broom cupboards for ironing boards, household ladders,
vacuum cleaners and cleaning products of all types, right through to shoe polish, detergents and cloths for all purposes. Everything
needs, and has, its place.
Waste separation and recycling place ever increasing demands on our attention. In this respect, having suitable units with enough
containers for the different types of waste is becoming ever more important. Our flexible sink base units with various waste separation
systems are ideal for this.
The laundry room is (sometimes) also the passageway from the garden into the apartment. Therefore, a sink for washing away
coarse dirt is indispensable. Drip inserts in sink base units are the ideal dirt and water catchers when cleaning football boots and
hiking boots.
Much of what we have, but do not need all the time, has to be tidied away. This also includes tools for small repairs, sewing kits and
yarn, and much more. The units that we are familiar with in the kitchen can also be used for this in the laundry room, or be given new
tasks.
8.33
High level built-in dishwashers have already demonstrated their practicality in the kitchen. Installing the washing
machine at a higher level saves us from bending down when loading and unloading.
The support base for the washing machine is flexible and versatile in use. The pull-out tray with a Tip-On fitting
that, when pulled out, snaps into place and therefore remains open, is another practical feature. This is an ideal
place for putting a laundry basket down. The deep drawer below it has plenty of space for laundry detergents and
other utensils.
The support base has a carcase depth of 560 mm, and the stable upper shelf has a thickness of 25 mm and a
depth of 710 mm. This enables the height to be adapted to the actual depth required for the washing machine or
to any connections protruding from the wall.
An anti-vibration mat on the upper shelf ensures excellent stability and provides a secure footing for the washing
machine when running at high speeds.
The support base for the washing machine or dryer is fitted with dimensionally-variable modular panels. Interme-
diate shelves, on which wall units or top units can be placed, can be positioned above the appliances. Therefore,
individual unit designs can be created that provide open or closed storage solutions for all types of materials.
Tall units with laundry baskets in white are an aid to
sorting dirty laundry by colour or degree of soiling.
The storage space is not designed for specific purposes – it can be used in any way to reflect your individual wishes and needs.
Use the choice of units put together here for you as an idea for your utility room.
All of the units from the A78 line can easily be combined with them. Design the room to suit your needs. Our entire product lineup
leaves no space unused.
8.34
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Unit for washing machine SUWTA 60 704 730 749 772 792 859 902 925 1121
carcase 490 mm high,
560 mm deep
1 anti-vibration mat
1 shelf with Tip-On
1 deep drawer
Top panel 25 mm thick, 710 mm deep
protruding at the rear for on-site adap-
tation
Unit must be clad with modular panels
Base unit UWIT 60 1246 1289 1326 1352 1379 1434 1469 1521 1862
1 hinged door
2 washing baskets, white
2 shelves with Tip-On
tall unit for washing SW 60 221 2069 2193 2284 2385 2498 2692 2810 2950 3743
2210 mm high
1 flap door
2 hinged doors
2 fixed shelves
2 adjustable shelves
3 washing baskets, white
2 shelves with Tip-On
tall unit for washing SW 60 208 1925 2037 2114 2200 2324 2473 2644 2731 3566
2080 mm high
2 hinged doors
2 fixed shelves
2 adjustable shelves
3 washing baskets, white
2 shelves with Tip-On
tall unit for washing SW 60 195 1855 1966 2040 2126 2218 2355 2459 2589 3254
1950 mm high
2 hinged doors
2 fixed shelves
1 adjustable shelf
3 washing baskets, white
2 shelves with Tip-On
tall unit for washing SW 60 156 1803 1889 1964 2017 2073 2183 2255 2362 3053
1560 mm high
2 hinged doors
1 adjustable shelf
1 fixed shelf
3 washing baskets, white
2 shelves with Tip-On
8.35
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
tall unit for washing SW 60 130 1681 1751 1789 1850 1944 2038 2175 2208 2689
1300 mm high
2 hinged doors
1 fixed shelf
1 adjustable shelf
3 washing baskets, white
2 shelves with Tip-On
Base unit UA 15 A 744 780 812 835 860 920 930 964 1006
1 deep drawer with
2 fixed wire baskets
Base unit for provisions UT 60 A 994 1037 1074 1100 1127 1182 1217 1269 1610
1 hinged door
1 fixed basket
1 Orgaset
2 adjustable shelves in 410 mm depth
Base unit with pull-out table USTSA 60 1447 1494 1517 1587 1654 1782 1831 1866 2364
1 drawer
1 pull-out tabletop, white on telescopic
tracks
1 drawer
1 deep drawer
Size of the extended tabletop:
844 x 551 mm
Max. load: 25 kg
Sink base unit SP 45 360 405 442 462 487 546 573 631 872
SP 50 369 416 451 472 498 560 589 644 921
1 hinged door SP 60 394 437 474 501 528 583 619 672 1018
1 fixed infill panel
2 SP 45 2 402 453 493 516 546 611 642 704 963
Matching accessories: 2 SP 50 2 412 463 502 526 556 626 658 716 1013
Drip inserts EZIT .. A SP 60 2 436 485 525 555 587 649 689 745 1110
2
Sink base unit SPA 45 1 483 526 560 588 615 667 701 754 1079
SPA 50 1 489 532 567 595 622 675 709 762 1090
1 reduced-depth deep drawer SPA 60 1 502 546 582 611 639 693 728 783 1120
450 mm deep
2 SPA 45 12 525 571 610 640 671 731 769 823 1167
Matching accessories: 2 SPA 50 12 531 577 616 647 679 739 777 832 1180
set of Servodrive accessories ZAZ 7 SPA 60 12 545 593 633 665 697 759 798 855 1212
2
8.36
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Corner storage unit SE 120 221 2510 2638 2727 2832 2945 3139 3258 3399 4123
2 side panels 590 mm deep for tall units SE 120 208 2434 2547 2624 2711 2834 2981 3153 3241 3996
+ plinth height
available in all panel colours SE 120 195 2406 2518 2593 2680 2772 2908 3011 3142 3725
Carcase interior colour white or anthracite
grey
1 top shelf 25 mm thick
4 shelves 25 mm thick
1 sliding door with sliding door fitting and
plinth element
Handle vertically over the complete front
height as opening assistance in stainless
steel- effect or aluminium black
Planning dimension 1200 x 600 mm
Tall unit for broom SB 30 221 1069 1203 1281 1369 1457 1612 1693 1847 2172
SB 45 221 1126 1262 1339 1441 1545 1700 1802 1950 2467
1 flap door SB 50 221 1146 1283 1370 1466 1570 1761 1841 1993 2591
1 door (dowelled)
2 fixed shelves SB 60 221 1201 1325 1416 1516 1630 1823 1941 2082 2867
1 hook for brooms
1 holder for vacuum cleaner hose D SB 30 221 D 1069 1203 1281 1369 2101 - - 1847 2172
1 hook rail D SB 45 221 D 1126 1262 1339 1441 2263 - - 1950 2467
2 runners for adjustable wire baskets D SB 50 221 D 1146 1283 1370 1466 2311 - - 1993 2591
3 wire baskets D SB 60 221 D 1201 1325 1416 1516 2420 - - 2082 2867
Tall unit for broom SB 30 208 897 1009 1084 1148 1229 1378 1492 1568 1917
SB 45 208 939 1053 1129 1208 1302 1458 1586 1680 2274
1 door (dowelled) SB 50 208 956 1071 1146 1229 1332 1487 1631 1719 2394
1 fixed shelf
1 adjustable shelf SB 60 208 996 1108 1184 1271 1394 1543 1716 1801 2633
1 hook for brooms
1 holder for vacuum cleaner hose D SB 30 208 D 897 1009 1084 1148 1865 - - 1568 1917
1 hook rail D SB 45 208 D 939 1053 1129 1208 2006 - - 1680 2274
2 runners for adjustable wire baskets D SB 50 208 D 956 1071 1146 1229 2059 - - 1719 2394
3 wire baskets D SB 60 208 D 996 1108 1184 1271 2168 - - 1801 2633
Tall unit for broom SB 30 195 871 986 1053 1125 1192 1298 1372 1512 1726
SB 45 195 916 1032 1100 1182 1267 1372 1468 1602 2007
1 door (dowelled) SB 50 195 934 1053 1124 1207 1290 1424 1497 1628 2097
1 fixed shelf
1 hook for brooms SB 60 195 974 1085 1160 1245 1337 1475 1579 1709 2367
1 holder for vacuum cleaner hose
1 hook rail D SB 30 195 D 871 986 1053 1125 1820 - - 1512 1726
2 runners for adjustable wire baskets D SB 45 195 D 916 1032 1100 1182 1958 - - 1602 2007
3 wire baskets D SB 50 195 D 934 1053 1124 1207 2003 - - 1628 2097
D SB 60 195 D 974 1085 1160 1245 2094 - - 1709 2367
8.37
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Tall unit for broom SB 60 156 898 984 1059 1112 1168 1278 1350 1457 2143
1 door (dowelled) D SB 60 156 D 898 984 1059 1112 1872 - - 1457 2143
1 hook for brooms
1 holder for vacuum cleaner hose
1 hook rail
2 runners for adjustable wire baskets
3 wire baskets
Tall unit for broom SB 60 130 789 858 898 957 1053 1146 1282 1316 1791
1 hinged door
1 hook for brooms
1 holder for vacuum cleaner hose
1 hook rail
2 runners for adjustable wire baskets
3 wire baskets
Dresser unit AU 117 612 701 772 847 865 1012 1071 1148 1611
1 hinged door AU 104 590 689 757 826 836 992 1041 1102 1518
Number of shelves depends on the height
of the top unit AU 91 559 652 702 766 769 919 992 1046 1391
as dresser unit above dishwasher AU 65 479 565 608 661 681 751 799 840 1008
No visible sides! AU 52 452 521 556 600 617 678 716 750 905
8.38
high-gloss lacquer
Item
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Height and depth adjustable modular 16 WS 12 V 259 1436 437 528 741 902 - -
panel
Height 1001 mm up to 2600 mm max.
with max. depth 800 mm
Minimum depth 100 mm
also for room dividers
With panel protector in stainless-steel
effect or black.
per item
Top panels for tall units per metre P 10 273 1424 384 397 737 1098 - -
16 mm thick
611 - 1200 mm
max. length 1800 mm
Finished in decor, laminate and gloss
laminate
max. length 2600 mm
Height and depth adjustable modular 25 WS 2 V 405 1722 539 675 889 936 - -
panel
Height 1001 mm up to 2600 mm max.
with max. depth 800 mm
Minimum depth 100 mm
also for room dividers
With panel protector in stainless-steel
effect or black.
per item
Top panels for tall units per metre P 22 311 1474 418 431 774 1133 - -
25 mm thick
611 - 1200 mm
max. length 1800 mm
Finished in decor, laminate and gloss
laminate
max. length 2600 mm
8.39
8.40
Modular concept
A78 A72
2210 17 grids
2080 16 grids
1950 15 grids
1820 14 grids
1690 13 grids
1560 12 grids
1430 11 grids
1300 10 grids
1170 9 grids
1040 8 grids
910 7 grids
780
650
520
390
260
130
the ID points:
A Basic carcase: The ID points apply to the 6 A 1 MKP60208 610
define the carcase size. basic carcases and the Carcase: MKP 60208
built-in modules. B 2 MA6039 235
B Built-in modules: Modules: MA6039,
Always order from bottom to top. 5 MA6026, MS60, 3 MA6026 233
The layout of the built-in modules MON (595 mm high), 4 MS60 196
is defined by the order sequence. 4 MT 6078 5 MON (595 mm) 77
A78 A72 (705 mm high)
3 6 MT6078 (705 mm) 185
2 Total 1536
Ordering information
■ Any range and front finish can be chosen for each module. ■ Further customisation is not possible within the module concept. Please order these
■ Hinged doors can be mounted on either side on every module. preferred options through our normal procedure for handling customised production.
■ Widths cannot be changed on module units and modules. ■ For open niches, specify the niche size for the built-in appliance.
Depths can be changed (except in conjunction with niches for appliances) We adapt appliances to suit the module concept with absolute precision and ensure perfect
■ The depth of individual modules, such as pull-outs, can be reduced. reveal alignment below or above the niche.
This must be specified in the order. ■ Modules with flaps or upward folding doors can only be featured at the top of the carcase.
■ Height changes to built-in modules are free of charge. Configure articles in the chosen ■ Module carcases can only be produced and supplied completely filled with modules.
height. We automatically deduct the 2 mm for the effective finished dimension at top and ■ Please also observe the further information that is provided on module items.
bottom.
Item
width mm
universal
hinge
Module carcase for tall unit Carcase height 1300 mm 300 MKP 30 130 518
Carcase height 1300 mm 450 MKP 45 130 529
empty carcase to install single modules Carcase height 1300 mm 500 MKP 50 130 539
560 mm deep Carcase height 1300 mm 600 MKP 60 130 550
Carcase height 1560 mm 300 MKP 30 156 528
Carcase height 1560 mm 450 MKP 45 156 541
Carcase height 1560 mm 500 MKP 50 156 550
Carcase height 1560 mm 600 MKP 60 156 562
Carcase height 1950 mm 300 MKP 30 195 559
Carcase height 1950 mm 450 MKP 45 195 571
Carcase height 1950 mm 500 MKP 50 195 579
Carcase height 1950 mm 600 MKP 60 195 591
Carcase height 2080 mm 300 MKP 30 208 579
Carcase height 2080 mm 450 MKP 45 208 593
Carcase height 2080 mm 500 MKP 50 208 599
Carcase height 2080 mm 600 MKP 60 208 610
Carcase height 2210 mm 300 MKP 30 221 587
Carcase height 2210 mm 450 MKP 45 221 599
Carcase height 2210 mm 500 MKP 50 221 607
Carcase height 2210 mm 600 MKP 60 221 617
8.41
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Module drawer MS 30 180 186 190 204 - - - 248 338
MS 45 185 191 196 210 - - - 255 363
130 mm high MS 50 187 196 202 218 - - - 264 374
for carcase depth 560 mm
MS 60 196 205 207 223 - - - 273 389
Module deep drawer MAIS 30 39 342 360 375 391 - - - 493 602
MAIS 45 39 353 373 388 404 - - - 514 641
390 mm high MAIS 50 39 360 381 396 410 - - - 532 673
1 internal drawer
for carcase depth 560 mm MAIS 60 39 374 394 409 427 - - - 545 705
8.42
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Module door MT 30 58 131 149 182 207 - - - 338 495
MT 45 58 150 195 234 254 - - - 412 555
585 mm high MT 50 58 156 213 248 282 - - - 439 599
1 hinged door
1 fixed base shelf MT 60 58 107 127 142 159 - - - 276 408
1 adjustable shelf
Various sizes 585 - 521 mm
for carcase depth 560 mm
8.43
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Module door MT 30 91 158 215 250 285 - - - 443 605
MT 45 91 173 231 269 306 - - - 481 756
910 mm high MT 50 91 179 235 271 313 - - - 492 806
1 hinged door
1 fixed base shelf MT 60 91 188 243 281 326 - - - 519 904
2 adjustable shelves
Various sizes 910 - 846 mm
for carcase depth 560 mm
8.44
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Module door MT 30 130 195 262 299 341 - - - 601 830
MT 45 130 209 276 317 374 - - - 677 1047
1300 mm high MT 50 130 213 282 321 383 - - - 699 1115
1 hinged door
1 fixed base shelf MT 60 130 222 292 330 391 - - - 748 1251
3 adjustable shelves
Various sizes 1300 - 1236 mm
for carcase depth 560 mm
8.45
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Module flap door MK 30 26 115 134 148 163 - - - 258 375
MK 45 26 129 148 159 179 - - - 270 390
260 mm high MK 50 26 133 152 168 182 - - - 292 429
1 flap door with cushioned closing
1 fixed base shelf MK 60 26 141 155 171 188 - - - 294 431
for carcase depth 560 mm
Module upward folding door ML 30 52 414 434 451 466 - - - 598 750
ML 45 52 419 449 466 492 - - - 615 817
520 mm high ML 50 52 423 454 477 499 - - - 623 847
1 upward folding door
1 fixed base shelf ML 60 52 430 460 492 518 - - - 640 902
1 adjustable shelf
for carcase depth 560 mm
Module upward folding door ML 30 65 425 437 480 495 - - - 645 802
ML 45 65 432 455 484 513 - - - 642 890
same as above, but ML 50 65 435 457 487 518 - - - 654 922
650 mm high
ML 60 65 441 464 499 531 - - - 680 989
Can only be fitted at the topmost position
in the carcase.
Module upward folding door ML 30 78 421 467 490 501 - - - 660 798
ML 45 78 425 478 501 520 - - - 683 888
same as above, but ML 50 78 430 486 513 526 - - - 687 930
780 mm high
2 adjustable shelves ML 60 78 443 493 528 549 - - - 691 1002
8.46
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Module parallel lift-up door ML 60 39 343 365 380 400 - - - 529 708
390 mm high
1 Parallel lift-up door
2 fixed shelves
back panel 10 mm thick
for carcase depth 560 mm
8.47
8.48
Edition Fly
A78 S78
Colour code
Material thickness (mm) 16 16
Laminate anthracite grey No. 193 Worktop surface: alpine oak-effect No. 614
Colours
oak-effect cashmere grey No. 127 anthracite grey No. 193
natural oak-effect No. 173 aqua metal No. 602
fango No. 180 Arizona pine-effect No. 642
graphite No. 123 canyon No. 643
light grey No. 179 carbon oak-effect No. 159
cashmere No. 190 castell oak-effect No. P79
Katthult pine-effect No. 134 oak-effect cashmere grey No. 127
magnolia white No. 148 natural oak-effect No. 173
Sanremo oak-effect No. 158 fango No. 180
ultra white No. 128 ferro bronze No. 621
walnut-effect No. 194 ferro titanium No. 622
white No. 101 graphite No. 123
Real wood old oak natural No. 375 light grey No. 179
old oak smoke grey No. 331 end-grained wood oak-effect No. 637
old oak reddish brown No. 338 cashmere No. 190
carbon oak No. 359 Katthult pine-effect No. 134
walnut No. 303 lava grey, stone structure No. P27
Gloss laminate graphite gloss No. 923 magnolia white No. 148
gloss fango No. 980 Manhattan grey No. 111
light grey gloss No. 979 marble carrara white No. 605
gloss cashmere No. 990
gloss magnolia white No. 948
marble mocha black No. 632
gloss ultra white No. 928
marble truffle No. 660
gloss white No. 901
oxide anthracite grey No. 696
Laminate
oxide concrete No. 631
carbon oak-effect No. 859 oxide light grey No. 600
ferro bronze No. 621
Edition Fly
Design
The kitchen innovation Edition Fly with newly In combination with this individual, sensual units with handles or vertical recessed grips
developed and patented suspension fittings design, floating base and tall units guarantee are available in heights 1300 and 1950 mm.
allows the base and tall units to be mounted maximum functionality and quality. Interna-
directly on the wall. tionally typical wider base units with 390 mm The optional lighting below the units underlines
height are used here. their exclusive homely character.
These base and tall units “float” above the
ground and create a purist, horizontally Various unit items with different functions The floating base and tall units in Edition
structured kitchen architecture that appears ensure that nothing is left to be desired. Float- Fly are available in all front ranges and
exceedingly light and links the kitchen with the ing base units are available with a horizontal colours.
living area. recessed grip or with handles. Edition Fly tall
8.49
Product information Edition Fly
Suspension system
The floating base and tall units are mounted with the aid of a special
suspension system. This suspension system comprises the following
components:
Supporting fitting
All wall-hanging base and tall units rest on a supporting fitting on the
left and right. These fittings absorb the forces acting vertically down-
wards and transfer them into the wall. The height can be adjusted by
+/-10 mm and the depth by +/- 6 mm. This means they can be adjusted
with absolute precision.
8.50
Product information Edition Fly
8.51
Product information Edition Fly
The floating base and tall units are mounted with the aid of a special suspension system comprising a wall unit fixture and a supporting fitting.
The wall fixture engages in the steel batten. Depending on the type of wall concerned, five different mounting sets are available as accessories
for securing the steel batten to the wall. One mounting set is required per unit.
Please note:
■ To order the appropriate wall mounting set it is necessary to specify the type of wall (see table of wall types).
The architect who designed the building should be consulted to establish the type of wall concerned.
■ If the material is unknown (e.g. in the case of materials used in other countries), it should be tested by an expert to determine compliance
with the specified compressive strength / retention forces. The compressive strength values listed in the table of “Wall types” must not be
undershot, depending on the type of stone concerned.
■ The special wall unit fixture and the selected mounting set may only be used in combination with the supporting fitting.
■ The best wall unit fixtures for Edition Fly for common types of wall have been developed in collaboration with TOX, the manufacturer
of branded dowels. Specific mounting sets have been developed for each type of wall and unit model to guarantee the
necessary retention when installed correctly. If you have any further questions regarding the fixtures, you can also call
+49 7576 9295 123 to contact the TOX hotline direct (for further contact details see www.tox.de).
Edition Fly units have been tested for high practical load levels (in accordance with safety standards) and tested by
the LGA. The following important points must be noted without fail to ensure planning, installation and product quality:
■ The structural load capacity of the walls must be assured by the dealer before placing the order. It does not fall within the product respon-
sibility of ALNO. The dealer is responsible for the choice of the mounting set.
■ Installation may only be undertaken by properly trained personnel and must be based on the ALNO installation manual.
■ Only the mounting sets listed below may be used. Alternative mounting methods must not be used!
The mounting elements supplied must not be modified.
■ The mounting sets are only suitable for the listed wall types in European countries.
■ Units must not be installed without a supporting fitting.
■ Free-standing walls (full height or half-height) can only be used in combination with a 90° wall bracket or connection to the wall.
Front-mounted wall panelling must be secured in some way (e.g. by connection to fixed parts of the building).
■ Units can only be mounted directly beside entrance doors or windows to a limited extent (structural conditions must be checked by an
expert).
■ The unfinished wall thickness must not be less than 175 mm. The plaster rendering must not be more than 15 mm thick.
■ The following system load capacity incl. net weight must not be undershot (carcase depth 560 and 578 mm):
8.52
Product information Edition Fly
Hollow bricks in accordance with DIN (compressive strength from 8.0 N/mm2 to 14.0 N/mm2)
Vertically perforated bricks Hlz 12 Mounting set MZF 2
Compressive strength 12 N/mm² 1 set for 1 unit, comprising:
DIN 105-1 --16 plastic plugs PSD-SL, 10 x 90 mm
--16 wood screws DIN 571 8 x 100 mm
--16 washers DIN 125 16 x 8 x 1.4 mm
Plan-PNE
Compressive strength 12 N/mm²
Z-17.1-679
Unipor
Compressive strength 8 N/mm²
Z-17.1-636
Klimaton ST 14
Compressive strength 8 N/mm²
Z-17.1-328
Hollow bricks / chemical (lightweight hollow bricks) (compressive strength from 6.0 N/mm2 to 10.0 N/mm2)
Klimatherm ST 9 Mounting set MZF 31 or MZF 32
Compressive strength 6 N/mm² 1 set for 1 unit, comprising:
Z-17.1-741
MZF 31 for units from 30 to 60 cm wide:
Poroton T 12 --1 ea. injection mortar TVM-SFP-K 300
--12 ea. meshed sleeves TVM-SHK 15 x 85
Compressive strength 6 N/mm²
--12 ea. TVM-IGA M8 x 80
Z-17.1-628 --12 ea. screws DIN 933 - M8 x 30
--12 ea. washers DIN 125 - 16 x 8 x 1.4
--Processing is only possible in combination with
Poroton T 9
injection gun MZFZ3
Compressive strength 6 N/mm²
Z-17.1-674
MZF 32 for units from 80 to 120 cm wide:
--2 ea. injection mortar TVM-STV-K 280
Flat bricks T 12 --16 ea. meshed sleeves TVM-SHK 15 x 85
Compressive strength 6 N/mm² --16 ea. TVM-IGA M8 x 80
Z-17.1-698 --16 ea. screws DIN 933 - M8 x 30
--16 ea. washers DIN 125 - 16 x 8 x 1.4
--Processing is only possible in combination with
Flat bricks T 14 injection gun MZFZ 3
Compressive strength 6 N/mm²
Z-17.1-625 MZFZ 3:
--Injection gun TVM-AP 280 / 300 for processing
Thermoplan MZ 8 --Injection mortar MZF 31 and MZF 32
Compressive strength 6, 8, 10 N/mm²
Z-17.2-906
8.53
Product information Edition Fly
8.54
Product information Edition Fly
390 mm high floating base units in a line with floating tall units
Tall units 1950 mm high as a new Edition Fly
solution clear the ground and add an entirely
new kind of design effect to the kitchen.
8.55
Product information Edition Fly
Corner transitions from 780 mm high base units to 390 mm high floating units
Depending on the selected range of fronts,
the corner transition between the floor-mounted
units and the floating line is planned with
back infill panel RB 78 V and base unit infill
panel UBF 1539 F or with corner infill panel
UEBF 6539 F and EAV 6039.
8.56
Product information Edition Fly
Working height
Panel
cladding height
(plinth height)
■ 5 standard plinth heights (mm): ■ 10 standard working heights (mm): (on 40 mm thick worktops)
105 / 130 / 155 / 180 / 205 795 / 820 / 845 / 870 / 895 / 925 / 935 / 950 / 1000 / 1025
■ 10 panel cladding heights (mm): ■ Carcase depth:
365 / 390 / 415 / 440 / 465 / 495 / 520 / 545 / 570 / 595 560 mm (578 mm for STARLINE)
Panel
cladding height
(plinth height)
8.57
Base units, Sink base units
Price group
carcase height 390 mm
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
unit without top 1 2 3 4 5 6 7 8 9 10
Base unit U 60 39 F 541 561 578 597 614 670 705 725 890
1 hinged door
Base unit USA 30 39 F 723 746 764 795 827 897 911 930 1114
USA 40 39 F 738 763 784 812 848 913 927 949 1149
1 drawer USA 45 39 F 751 777 795 825 861 930 940 962 1165
1 deep drawer
USA 50 39 F 760 791 811 839 874 950 964 995 1217
120 cm unit is not available USA 60 39 F 784 809 825 859 897 977 998 1012 1241
in ALNOBRIT and ALNOPOL! USA 80 39 F 909 925 937 985 1035 1109 1118 1143 1464
USA 90 39 F 922 938 953 999 1049 1121 1138 1155 1495
USA 100 39 F 940 964 975 1025 1081 1152 1165 1187 1541
USA 120 39 F 1020 1040 1056 1111 1166 1241 1256 1286 1636
Base unit UA 30 39 F 578 599 615 629 651 701 706 737 821
UA 40 39 F 597 616 633 649 671 723 731 766 875
1 deep drawer UA 45 39 F 604 626 641 656 676 729 743 782 899
120 cm unit is not available UA 50 39 F 612 632 647 664 684 740 756 795 921
in ALNOBRIT and ALNOPOL! UA 60 39 F 625 647 663 681 699 755 791 810 971
UA 80 39 F 713 724 741 769 794 844 867 893 1128
UA 90 39 F 727 740 758 784 813 868 885 904 1175
UA 100 39 F 744 755 772 801 831 896 905 928 1225
UA 120 39 F 813 826 848 873 908 973 984 1010 1302
Base unit UAIS 30 39 F 697 716 733 748 770 820 826 858 938
UAIS 40 39 F 712 732 750 766 788 842 850 885 991
1 deep drawer UAIS 45 39 F 719 742 756 771 793 848 860 901 1015
1 internal drawer
UAIS 50 39 F 715 735 750 766 787 842 859 898 1019
120 cm unit is not available UAIS 60 39 F 728 751 766 785 802 859 895 913 1070
in ALNOBRIT and ALNOPOL! UAIS 80 39 F 814 825 840 869 895 944 968 993 1223
UAIS 90 39 F 828 839 859 885 913 969 985 1005 1271
UAIS 100 39 F 847 858 874 904 934 999 1008 1031 1323
UAIS 120 39 F 913 927 948 974 1009 1074 1085 1111 1396
Corner base unit UEKL 110 39 FA 1374 1394 1412 1426 1446 1501 1514 1552 1633
with 45 cm door
1 hinged door UEKL 115 39 FA 1379 1398 1415 1431 1452 1507 1522 1562 1650
1 fully pivotable height adjustable with 50 cm door
carousel shelf LeMans
Arena shelf finish anthracite grey UEKL 125 39 FA 1414 1434 1451 1470 1487 1543 1578 1598 1720
with 60 cm door
carcase width 1000 mm, without corner
infill panel
Corner sink base unit SPE 105 39 F 621 640 656 673 695 748 754 789 896
with 40 cm door
1 hinged door SPE 115 39 F 628 647 664 679 702 755 771 811 936
1 fixed infill panel with 50 cm door
carcase width 1000 mm, without corner
infill panel SPE 125 39 F 635 656 673 691 709 764 799 820 980
with 60 cm door
Corner inf. panel UEBE to be ordered
separately.
8.58
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
unit without top 1 2 3 4 5 6 7 8 9 10
Corner infill panel UEBE 65 39 F 111 122 158 204 218 240 270 340 358
For corner base unit
fixed size corner infill mitred
for planning dimensions 650 x 650 mm
Corner infill panel UEBE 20 39 VF 161 197 238 293 343 395 416 461 557
same as above, but
variable corner infill panel mitred
Dimensions: 620 - 740 mm per side piece
Sink base unit SP 45 39 F 519 539 556 570 591 645 657 696 817
SP 50 39 F 528 548 564 579 602 656 671 711 843
1 hinged door SP 60 39 F 548 567 585 604 621 678 713 734 902
1 fixed infill panel
Matching accessories:
Drip inserts EZIT .. A
Sink base unit SPA 60 39 F 642 664 680 699 716 773 810 828 991
SPA 80 39 F 728 741 757 785 811 860 884 910 1149
1 deep drawer SPA 90 39 F 745 757 775 802 830 886 904 923 1197
With low back panel, reduced 150 mm
from the back. SPA 100 39 F 763 774 792 821 852 917 926 950 1251
SPA 120 39 F 832 847 868 895 929 996 1007 1032 1327
120 cm unit is not available
in ALNOBRIT and ALNOPOL!
Base unit for waste separation system UAM 60 39 F 1046 1068 1083 1102 1119 1175 1211 1230 1371
1 deep drawer with waste separation
system XXL
500 mm deep
waste separation system consisting of:
1 container 18 litres
2 containers 8 litres each,
1 container lid
3 containers 2.5 litres each
XXL, 60 cm wide
Base unit for hob UKHA 60 39 F 752 774 789 809 825 882 918 936 1092
UKHA 80 39 F 885 897 912 940 966 1015 1039 1064 1290
1 heat protection shelf UKHA 90 39 F 916 928 947 973 1002 1057 1074 1092 1355
1 deep drawer
UKHA 100 39 F 942 954 971 1001 1031 1094 1104 1127 1415
120 cm unit is not available UKHA 120 39 F 1057 1071 1091 1118 1153 1218 1229 1254 1533
in ALNOBRIT and ALNOPOL!
20 mm clearance to bottom edge of
worktop. During planning and installati-
on, it is essential to observe the safety
distances of the electrical appliance
manufacturer!
8.59
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
unit without top 1 2 3 4 5 6 7 8 9 10
Base unit for induction hob UKHA 60 39 1 F 799 821 836 856 872 929 965 983 1136
UKHA 80 39 1 F 932 944 960 987 1013 1062 1086 1112 1336
1 shelf to prevent accidental contact UKHA 90 39 1 F 964 975 995 1020 1049 1104 1121 1139 1399
1 deep drawer
UKHA 100 39 1 F 989 1002 1018 1048 1078 1141 1152 1174 1460
120 cm unit is not available UKHA 120 39 1 F 1103 1117 1137 1164 1199 1264 1275 1301 1577
in ALNOBRIT and ALNOPOL!
35 mm clearance to bottom edge of
worktop. During planning and installati-
on, it is essential to observe the safety
distances of the electrical appliance
manufacturer!
Infill panel for base units UBF 15 39 F 100 110 118 128 139 158 168 177 221
Finish in door material
fitted between wall and carcase
In ALNOART, ALNOCERA,
ALNOSATINA and ALNOVETRINA
door width 75 mm,
adjustment range in
carcase finish 77 - 150 mm.
Other front widths (at least 50 mm)
available with MPS 1 (apart from ALNO-
ART) on request.
Side cladding RBS 39 F 474 506 540 572 823 - 938 944 947
for mounting on the carcase side
50 mm wide
Finish in door material
for carcase depth 560 mm
Corner infill panel for base units UEBF 65 39 F 161 171 208 256 268 296 325 395 438
for 90° corner solution
Finish in door material
for planning dimensions 650 x 650 mm
Corner infill panel for base units UEBF 20 39 VF 186 204 241 274 307 346 362 401 489
Finish in door material
For variable planning dimensions
for 90° corner solution
min. dimension 50 mm per side.
Max. 180 mm at the carcase front edge
per side.
8.60
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
unit without top 1 2 3 4 5 6 7 8 9 10
Base unit UA 30 39 FH 656 675 692 718 741 789 795 826 891
UA 40 39 FH 676 697 713 746 767 - - 863 949
1 deep drawer UA 45 39 FH 690 712 726 757 778 - - 884 978
UA 50 39 FH 699 718 733 771 792 - - 902 1001
UA 60 39 FH 714 736 752 795 812 - - 923 1055
UA 80 39 FH 810 821 836 894 919 - - 1017 1216
UA 90 39 FH 829 840 860 919 947 - - 1038 1270
UA 100 39 FH 851 862 878 944 974 - - 1071 1324
UA 120 39 FH 926 939 961 1031 1065 - - 1167 1406
Base unit UAIS 30 39 FH 774 795 812 838 861 - - 949 1012
UAIS 40 39 FH 777 797 814 847 868 - - 964 1043
1 deep drawer UAIS 45 39 FH 789 812 826 857 877 - - 983 1073
1 internal drawer
UAIS 50 39 FH 801 821 835 873 895 - - 1005 1099
UAIS 60 39 FH 818 839 856 899 915 - - 1026 1153
UAIS 80 39 FH 910 922 937 995 1019 - - 1118 1312
UAIS 90 39 FH 930 941 961 1019 1048 - - 1138 1365
UAIS 100 39 FH 953 965 981 1047 1077 - - 1173 1422
UAIS 120 39 FH 1026 1040 1061 1131 1166 - - 1268 1501
Corner infill panel for base units UEBF 65 39 FH 161 171 208 256 268 - - 395 438
Finish in door material
for 90° corner solution
for planning dimensions 650 x 650 mm
Corner infill panel for base units UEBF 20 39 VFH 186 204 241 274 307 - - 401 489
Finish in door material
For variable planning dimensions
for 90° corner solution
Min. dimension 50 mm per side.
Max. 180 mm at the carcase front edge
per side.
Corner base unit UEKL 110 39 FHA 1482 1502 1520 1571 1590 - - 1696 1735
with 45 cm door
1 hinged door UEKL 115 39 FHA 1503 1523 1540 1592 1614 - - 1725 1772
1 fully pivotable height adjustable with 50 cm door
carousel shelf LeMans
Arena shelf finish anthracite grey UEKL 125 39 FHA 1539 1559 1577 1631 1649 - - 1762 1842
with 60 cm door
carcase width 1000 mm, without corner
infill panel
Corner sink base unit SPE 105 39 FH 701 719 735 770 791 - - 886 969
with 40 cm door
1 hinged door SPE 115 39 FH 714 733 750 786 809 - - 918 1017
with 50 cm door
carcase width 1000 mm, without corner
infill panel SPE 125 39 FH 724 745 762 804 822 - - 933 1063
with 60 cm door
Corner infill panel UEBE 65 39 FH must be
ordered separately.
Corner infill panel for base units UEBE 65 39 FH 111 122 158 204 218 - - 340 358
fixed size corner infill mitred
planning dimensions 650 x 650 mm
8.61
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
unit without top 1 2 3 4 5 6 7 8 9 10
Corner infill panel UEBE 20 39 VFH 161 197 238 293 343 - - 461 557
For corner base unit
variable corner infill panel mitred
Dimensions: 628 - 740 mm per side piece
Sink base unit SP 45 39 FH 606 626 643 674 695 - - 801 902
SP 50 39 FH 614 633 650 686 709 - - 818 921
1 hinged door SP 60 39 FH 638 658 675 718 736 - - 849 984
Matching accessories:
Drip inserts EZIT .. A
Sink base unit SPA 60 39 FH 732 754 770 814 830 - - 944 1076
SPA 80 39 FH 826 838 854 911 936 - - 1036 1237
1 deep drawer SPA 90 39 FH 848 859 878 937 966 - - 1059 1291
With low back panel
350 mm deep SPA 100 39 FH 871 882 900 965 997 - - 1093 1349
SPA 120 39 FH 948 961 982 1054 1088 - - 1191 1432
Base unit for waste separation system UAM 60 39 FH 1134 1157 1172 1215 1232 - - 1343 1454
1 deep drawer with waste separation
system XXM
500 mm deep
with lid
waste separation system consisting of:
60 cm wide:
2 containers, 14 litres
1 container lid
1 utensil basket
3 compartment dividers
Base unit for hob UKHA 60 39 FH 840 863 878 922 938 - - 1050 1174
or induction hob UKHA 80 39 FH 981 993 1009 1065 1090 - - 1189 1381
UKHA 90 39 FH 1018 1029 1049 1108 1135 - - 1227 1448
1 heat shield / shelf to prevent accidental
contact UKHA 100 39 FH 1050 1061 1078 1143 1173 - - 1270 1514
1 deep drawer UKHA 120 39 FH 1170 1184 1205 1275 1310 - - 1412 1638
Infill panel for base units UBF 15 39 FH 100 110 118 128 139 - - 177 221
Finish in door material
fitted between wall and carcase
Side cladding RBS 39 FH 496 528 562 594 846 - - 1005 1008
for mounting on the carcase side
50 mm wide
Finish in door material
for carcase depth 578 mm
8.62
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Tall unit S 30 195 2 F 1028 1115 1184 1252 1341 1483 1595 1644 1999
S 45 195 2 F 1072 1162 1233 1319 1422 1572 1685 1751 2335
2 hinged doors S 50 195 2 F 1083 1173 1245 1336 1446 1591 1727 1791 2438
1 fixed shelf
4 adjustable shelves S 60 195 2 F 1122 1212 1287 1378 1505 1654 1813 1888 2664
V S 30 195 2 FV 1139 1225 1295 1362 1451 - - 1754 2101
V S 45 195 2 FV 1182 1273 1344 1429 1532 - - 1862 2435
V S 50 195 2 FV 1194 1283 1356 1447 1557 - - 1901 2539
V S 60 195 2 FV 1232 1323 1398 1489 1616 - - 1999 2764
Tall unit for provisions SIA 30 195 1 F 1783 1870 1940 2006 2096 2238 2350 2399 2716
SIA 45 195 1 F 1822 1911 1983 2069 2172 2322 2435 2501 3047
2 hinged doors SIA 50 195 1 F 1836 1926 1998 2090 2199 2344 2480 2544 3153
1 shelf
1 fixed shelf SIA 60 195 1 F 1873 1962 2038 2129 2255 2405 2563 2639 3377
4 interior drawers V SIA 30 195 1 FV 1894 1980 2050 2118 2206 - - 2509 2819
SIA 45 195 1 FV 1932 2023 2094 2179 2282 - - 2611 3149
Must not be placed directly alongside V
the wall. V SIA 50 195 1 FV 1947 2036 2108 2200 2309 - - 2654 3255
V SIA 60 195 1 FV 1983 2074 2149 2240 2366 - - 2750 3479
Tall unit for built-in appliance SU 88 195 1 F 1169 1266 1357 1452 1546 1724 1819 1928 2776
Niche height 878 mm V SU 88 195 1 FV 1291 1387 1479 1575 1669 - - 2050 2889
1 hinged door
1 hinged appliance door
1 hinged door
1 adjustable shelf
Tall unit for built-in appliance SU 102 195 1 F 1246 1352 1443 1543 1653 1838 1936 2000 2799
Niche height 1025 mm V SU 102 195 1 FV 1369 1474 1566 1666 1776 - - 2123 2910
1 flap door
1 hinged appliance door
1 hinged door
1 adjustable shelf
Air vent opening for appliance units in the ceiling infill: 200 cm². 8.63
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 122 A 195 1 F 1260 1366 1437 1532 1668 1876 2062 2127 2920
Niche height 1225 mm V SU 122 A 195 1 FV 1382 1487 1560 1654 1790 - - 2249 3033
1 hinged door
1 hinged appliance door
1 deep drawer
Tall unit for built-in appliance SUB 195 F 1137 1185 1262 1333 1407 1542 1590 1681 2385
niche height 585 - 595 mm V SUB 195 FV 1260 1308 1384 1456 1529 - - 1803 2497
1 hinged door
1 adjustable shelf
1 open niche
1 hinged door
1 adjustable shelf
The aperture size may be adjusted with
infill panel in door material.
Tall unit for appliances SUMB A 195 F 1279 1334 1391 1452 1521 1688 1722 1770 2377
Niche height V SUMB A 195 FV 1401 1457 1513 1575 1643 - - 1892 2491
at top 450 mm
at bottom 595 mm
1 hinged door
1 adjustable shelf
2 open niches
1 deep drawer
Tall unit for appliances SULB 195 F 1538 1601 1675 1750 1832 2026 2102 2182 2891
for free standing microwave V SULB 195 FV 1661 1724 1797 1873 1954 - - 2304 3002
max. 495 mm wide, 330 mm high behind
lift-up door
niche height 585 - 595 mm
1 flap door
1 lift-up door
1 open niche
1 hinged door
1 adjustable shelf
8.64 Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 152 2T 195 F 1146 1243 1334 1430 1524 1701 1796 1905 2755
niche height 1446 - 1525 mm V SU 152 2T 195 FV 1269 1366 1457 1552 1646 - - 2028 2867
1 hinged door
2 hinged appliance doors
Tall unit for built-in appliance SU 178 195 2 F 1090 1180 1256 1346 1473 1623 1781 1856 2634
niche height 1788 mm V SU 178 195 2 FV 1201 1291 1367 1457 1583 - - 1968 2735
Tall unit for built-in appliance SU 178 2T 195 3F 1083 1174 1250 1340 1467 1617 1775 1850 2628
niche height 1788 mm V SU 178 2T 1953FV 1206 1296 1372 1462 1588 - - 1973 2740
Air vent opening for appliance units in the ceiling infill: 200 cm². 8.65
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Tall unit S 30 130 F 894 960 998 1039 1101 1190 1285 1299 1495
S 45 130 F 923 991 1031 1089 1158 1256 1357 1392 1727
1 hinged door S 50 130 F 931 1000 1040 1102 1179 1272 1386 1419 1799
3 adjustable shelves
S 60 130 F 958 1027 1067 1126 1222 1316 1451 1484 1951
V S 30 130 FV 974 1041 1078 1120 1181 - - 1380 1570
V S 45 130 FV 1004 1072 1112 1170 1239 - - 1473 1801
V S 50 130 FV 1012 1080 1121 1182 1260 - - 1499 1873
V S 60 130 FV 1039 1108 1148 1207 1303 - - 1566 2026
Tall unit for provisions SIA 30 130 F 1651 1719 1755 1797 1858 1948 2044 2057 2215
SIA 45 130 F 1681 1749 1790 1847 1917 2013 2115 2150 2447
1 hinged door SIA 50 130 F 1688 1756 1797 1858 1936 2029 2144 2176 2518
4 interior drawers
SIA 60 130 F 1716 1784 1824 1883 1979 2073 2208 2242 2670
Must not be placed directly alongside V SIA 30 130 FV 1732 1799 1836 1878 1940 - - 2138 2291
the wall. SIA 45 130 FV 1762 1830 1871 1928 1997 - - 2231 2521
V
V SIA 50 130 FV 1770 1837 1878 1940 2018 - - 2256 2593
V SIA 60 130 FV 1796 1866 1904 1964 2059 - - 2323 2746
Tall unit for built-in appliance SU 88 130 F 944 1012 1052 1111 1207 1301 1436 1470 1938
Niche height 878 mm V SU 88 130 FV 1024 1093 1132 1192 1287 - - 1550 2012
Tall unit for built-in appliance SU 102 130 F 944 1012 1052 1111 1207 1301 1436 1470 1938
Niche height 1025 mm V SU 102 130 FV 1024 1093 1132 1192 1287 - - 1550 2012
Tall unit for built-in appliance SU 122 130 F 918 986 1026 1085 1181 1274 1410 1442 1910
Niche height 1225 mm V SU 122 130 FV 1001 1070 1109 1169 1265 - - 1527 1990
Tall unit for built-in appliance SUB 130 F 922 949 989 1029 1072 1151 1176 1225 1623
niche height 585 - 590 mm V SUB 130 FV 1003 1029 1070 1110 1153 - - 1306 1697
1 open niche
1 hinged door
1 adjustable shelf
8.66 Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Support base for integrated high level SUG 2A 130 F 920 952 981 1016 1058 1175 1207 1226 1474
dishwasher
1 drawer 256 mm high
reduced 150 mm from the back
1 deep drawer
reduced 150 mm from the back
Support base for integrated high level SUG 2A 130 XF 972 1004 1033 1068 1110 1227 1259 1278 1523
dishwasher
1 drawer 256 mm high
reduced 150 mm from the back
1 drip tray
1 deep drawer
reduced 150 mm from the back
Air vent opening for appliance units in the ceiling infill: 200 cm². 8.67
high-gloss lacquer
Item
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Additional charge for cable drillings bottom MPKBU - - - - - - - 22
top MPKBO - - - - - - - 22
8 mm dia. cable drill holes 200 mm
deep at centre of wall units and Edition
Fly units. Flexible on request: on units
> 600 mm with 2 drill holes in any
position (min. distance from carcase edge
85 mm), in corner wall units or Edition-Fly
corner base units.
8.68
Item
width mm
universal
hinge
Installation accessories for free-hanging wall units MZF 1 22
for concrete and solid materials
1 set for 1 cabinet, comprising:
14 plastic plugs SD, 10 x 50 mm
14 wood screws, DIN 571 8 x 70 mm
14 washers DIN 125 16 x 8 x 1.4 mm
Installation accessories for free-hanging wall units 300-600 mm unit width MZF 31 77
for hollow bricks / chemical (lightweight hollow bricks) for wall-
mounting outside Germany
1 set for 1 cabinet, comprising:
1 ea. injection mortar TVM-SFP-K 300
12 ea. meshed sleeves TVM-SHK 15 x 85 mm
12 ea. TVM-IGA M8 x 80 mm
12 ea. screws DIN 933 - M8 x 30 mm
12 ea. washers DIN 125 - 16 x 8 x 1.4 mm
Processing is only possible in combination with injection gun MZFZ 3
Installation accessories for free-hanging wall units 800-1200 mm unit width MZF 32 104
8.69
8.70
MARECUCINA
S78
S78
Design
MARECUCINA brings nautical forms, colours and materials to the kitchen. Its maritime origin is reflected in numerous details, its stylish design
It invites users to make their kitchen even more personal – and to enjoy combining several typically nautical elements such as
an element of freedom in their everyday lives.
■ Sail (walnut framed glass surfaces with LED lighting)
Shipbuilding and kitchen manufacture have one characteristic in
■ Masts
common:
■ Walnut surfaces (rounded walnut worktop with maple veneer inlays,
A passion for high-grade materials and quality, precise workmanship and walnut fronts)
expressive individuality.
■ Chrome-plated finish and functional inlays
MARECUCINA lets these passions run free. ■ Rounded base units with imaginative, functional equipment:
– Shelves for careful storage of supplies
– fully swivelling LeMans shelves making efficient use
of the space available
■ Rounded shelf units
■ Rounded plinth
The result is a kitchen that appeals not only to keen boatspeople, but
also to anyone who has ever experienced the freedom of the seas.
Design
The sporty maritime emotionality and elegance of MARECUCINA exemplify a major development in contemporary kitchen design:
Today’s kitchen is more than simply a room in which to prepare meals. It has become a place
■ in which to feel good and meet other people, a centre for communication, and
■ it reflects the personality of its owner.
❸ ❹ ❹
➊ ➋ ➋ ➋
In the range ALNOSTAR SIGN MARECUCINA, deep drawers with a height of 3 levels at the bottom
of the ➊ base and ➋ tall units feature the characteristic walnut veneer front finish. The other
fronts of these units are lacquered in high-gloss white.
No. M01 high-gloss white/walnut The rounded ❸ base units with hinged doors in high-gloss white lacquer are also included in the
ALNOSTAR SIGN MARECUCINA range.
Please order the ❹ remaining standard cupboard articles with the ALNOSTAR SIGN range No. 342.
Recommended carcase and visible side colours
Recommended worktops
Ordering information
■ Carcase colour always white No. 101.
Visible sides possible in No. 101 white, No. 901 gloss white and No. 501 high-gloss white lacquer
(With regard to execution of the visible sides, please also note the information concerning article types).
■ The handle recess is only available in gloss white lacquer No. G901.
■ Plinth height 105 mm. The bow-end infill panels, panel cladding etc. are adapted to this plinth height. A size XXL dishwasher is consequently
not possible.
■ For visual and structural reasons, please note that at least approx. 1/3 to 1/2 of the kitchen length (but not less than 1100 mm) must comprise
floor-mounted units and therefore only 2/3 to 1/2 Edition Fly units when planning islands and rows.
■ Minimum boat length for islands is 3300 mm.
■ We recommend sinks with flush inset edge.
For rows with chrome-plated bow-end infill panel For island solutions
■ The base unit U 8039 BFHM with a height of 3 levels is installed with ■ The base unit with hinged door U 8039 RFHM takes account of
the NFM panel cladding, which is secured approx. 80 mm from the dimensional factors when planning islands.
wall.
■ The bow-end infill panel UBB 8 HM must be ordered separately.
■ The chrome-plated bow-end infill panel is included with the unit. It comprises a chrome-plated metal panel and a carcase interior
panel, is 850 mm high and therefore defined for a plinth height of
■ Note the Edition Fly product information with regard to "Wall mount-
105 mm.
ing and mounting sets".
For rows and island solutions For rows and island solutions Stern-end infill panel for island solutions
■ The stern-end base unit with 6 height levels ■ Shelves provide storage space behind the ■ The stern-end infill panel UBH 25 HM in
is fitted with 2 fully swivelling LeMans rounded hinged door of the U 50 HM. walnut veneer is needed to finish off the
carousel shelves. island solutions. Infill panel 16 mm thick,
■ The stern-end infill panel UBH 25 HM must
250 mm wide.
■ The stern-end infill panel UBH 25 HM must be ordered separately for an island solution.
be ordered separately for an island solution. ■ Always use the rounded plinth elements
■ For stern-end units please use the rounded
SOA 145 HM.
■ The units have been prepared for the plinth elements SOA 50 HM (row) or
matching round plinth elements. SOA 145 HM (island).
Rounded modular panels for base and wall units - 363 mm and 390 mm high
■ 50 mm wide rounded modular panels for
wall units (390 mm high) in high-gloss
white, as well as modular panels for base
units (363 mm high) in high-gloss white and
walnut veneer add an elegant final touch.
■ With these modular panels for base units,
the walnut veneer front of the lower deep
drawers of the tall and base units can also
be continued along the visible side of the
units.
■ We recommend using the matching rounded
plinth elements SOA 5 HM in the finishes
walnut and high-gloss white.
Panel cladding for unsupported 390 mm high Edition Fly base units
For rows with bow-end base shelf unit For rows with rounded base unit with hinged doors
■ When using the bow-end base shelf unit URAB 8039 FHM at the end of ■ The base units U 8039 BFHM with a height of 3 levels and bow-
a row, the standard panel cladding NFP must be used in walnut veneer, end infill panel are installed with the NFM panel cladding, which is
gloss white laminate or walnut-effect finish. secured approx. 80 m from the wall. Here too, available finishes are
walnut veneer, gloss white laminate and walnut-effect.
For island solutions with rounded base unit with hinged doors
■ The base units U 8039 RFHM with a height of 3 levels and the bow-
end infill panel UBB 8 HM which must be ordered separately must
be installed with the wall element for island solutions MZBM and the
panel cladding for island solutions NFBM. Note the ordering instruc-
tions for the respective items.
■ The panel cladding for island solutions is available in walnut veneer
or walnut-effect finish.
■ Please note that this panel cladding and the wall element are
designed for a plinth height of 105 mm.
■ For visual and structural reasons, please note that at least approx.
1/3 to 1/2 of the kitchen length (but not less than 110 cm) must
comprise floor-mounted units and therefore only 2/3 to 1/2 Edition Fly
units when planning islands.
■ Minimum boat length for islands is 3300 mm.
Worktops
The following worktop versions are recommended for use when
planning a MARECUCINA kitchen
■ Standard PS worktop in white No. 101
■ Standard PS worktop in walnut-effect No. 194
■ PV..M worktop in solid walnut with maple veneer inlays No. P26:
– This solid walnut worktop with maple veneer inlays reflects the
passion for high-grade materials and quality, precise workmanship
and expressive individuality.
– The 50 mm thick worktop is finished with maple veneer inlays
50 mm apart and the surface oiled.
– Note the worktop weight of approx. 34 kg/m2.
– The bow-end of the worktop can be shaped to match the design
with the item AUS 7242 M with a radius of 420 mm, the flat
moulding and the enclosed ALNO logo. Item AUS 7242 M is needed
twice for this island solution.
– Item AUS 7222 M defines the stern-end of the worktop with a
radius of 220 mm. Item AUS 7222 M is needed twice for this island
solution.
– For corner solutions, the maple veneer inlays continue beyond the
join between worktops at an angle of 90°. AUS 3500 must always
be ordered per worktop section.
Bow-end Stern-end
➊ ➋ ❸
➍ ➎ ❻
width cm
unit without top 1 2 3 4 5 6 7 8 9 10
Bow-end base unit U 80 39 BFHM - - - - - 17049 - - - -
1 hinged door
1 fixed shelf
1 bow-end infill panel, chrome-plated
for row solution
width cm
unit without top 1 2 3 4 5 6 7 8 9 10
Stern-end base unit UKL 110 HAM - - - - - 9603 - - - -
with 60 cm door
1 hinged door
2 fully pivotable height adjustable
carousel shelves LeMans
Arena shelf finish anthracite grey
for rows and island solutions
width cm
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Base unit U2A 30 H - - - - - 990 - - - -
U2A 40 H - - - - - 1048 - - - -
2 deep drawers U2A 45 H - - - - - 1062 - - - -
Carcase white No. 101 U2A 50 H - - - - - 1089 - - - -
Recessed grip in gloss white No. G901 U2A 60 H - - - - - 1134 - - - -
Lower deep drawer with walnut veneer U2A 80 H - - - - - 1414 - - - -
Only plinth height 105 mm U2A 90 H - - - - - 1473 - - - -
U2A 100 H - - - - - 1542 - - - -
U2A 120 H - - - - - 1694 - - - -
Base unit U2AIS 30 H - - - - - 1112 - - - -
U2AIS 40 H - - - - - 1169 - - - -
2 deep drawers U2AIS 45 H - - - - - 1184 - - - -
1 interior drawer at top
U2AIS 50 H - - - - - 1212 - - - -
Carcase white No. 101 U2AIS 60 H - - - - - 1258 - - - -
Recessed grip in gloss white No. G901 U2AIS 80 H - - - - - 1535 - - - -
Lower deep drawer with walnut veneer U2AIS 90 H - - - - - 1595 - - - -
Only plinth height 105 mm
U2AIS 100 H - - - - - 1664 - - - -
Matching accessories: U2AIS 120 H - - - - - 1816 - - - -
Driver for internal drawer EZIZ..
width cm
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Tall unit S2A 30 195 H - - - - - 1660 - - - -
S2A 45 195 H - - - - - 1775 - - - -
1 hinged door S2A 50 195 H - - - - - 1834 - - - -
3 adjustable shelves
2 deep drawers S2A 60 195 H - - - - - 1794 - - - -
width cm
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SUB 2A 195 H - - - - - 1901 - - - -
niche height 595 mm
1 hinged door
1 adjustable shelf
1 open niche
2 deep drawers
width cm
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Tall unit S2A 30 208 H - - - - - 1741 - - - -
S2A 45 208 H - - - - - 1862 - - - -
1 hinged door S2A 50 208 H - - - - - 1902 - - - -
3 adjustable shelves
2 deep drawers S2A 60 208 H - - - - - 1910 - - - -
width cm
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 122 2A 208 H - - - - - 1949 - - - -
Niche height 1225 mm
1 hinged appliance door
2 deep drawers
high-gloss lacquer
Item
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
unit without top
Bow-end base shelf unit 390 mm high 800 URAB 80 39 FHM L/R - - 4692 - - 6332 - -
Shelf unit 600 mm deep with flush front
1 fixed shelf
for row solution
High-gloss white No. 501
and gloss white No. 901
right version shown Only in combination with supporting
panel NFP
Worktop radius 420 mm
Stern-end base shelf unit 780 mm high 500 URAH 50 HM L/R - - 4978 - - 6628 - -
Shelf unit 600 mm deep with flush front
2 fixed shelves
for row solution
High-gloss white No. 501
and gloss white No. 901
right version shown Only plinth height 105 mm
Order rounded plinth element SOA 50 HM
separately.
Worktop radius 220 mm
high-gloss lacquer
Item
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
unit without top
Bow-end wall shelf unit 390 mm high 800 ORAB 80 39 HM L/R - - 4474 - - 5957 - -
Shelf unit 370 mm deep with flush front
1 fixed shelf
High-gloss white No. 501
and gloss white No. 901
Stern-end wall shelf unit 390 mm high 400 ORAH 40 39 HM L/R - - 4366 - - 5810 - -
Shelf unit 370 mm deep with flush front
1 fixed shelf
High-gloss white No. 501
and gloss white No. 901
high-gloss lacquer
Item
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Supporting panel in combination with per m² NFP 829 1859 856 964 - - 1302 -
bow-end base shelf unit
for concealing installation lines
for free-hanging units variable length and
height with sealing profile and mounting
hardware
116 mm deep
depth can be shortened on site to 32 mm
Laminate finish
Grain direction wood-effect pattern
horizontal
walnut-effect No. 194
Gloss laminate finish
gloss white no. 901
Veneered finish
Grain direction horizontal
walnut no. 303
max. length 2600 mm
Max. height 610 mm
min. length and height
150 mm
Minimum calculation 0.4 m²
Supporting panel in combination with per m² NFM 291 1172 399 426 - - - -
bow-end base unit
for free-hanging units variable length and
height with sealing profile and mounting
hardware
when using the 80 mm bow-end infill
panel Depth of supporting panel 80 mm
Laminate finish
Grain direction wood-effect pattern
horizontal
walnut-effect No. 194
Gloss laminate finish
gloss white no. 901
Veneered finish
Grain direction horizontal
walnut no. 303
max. length 2600 mm
Max. height 610 mm
min. length 150 mm
Minimum calculation 0.4 m²
high-gloss lacquer
Item
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Supporting panel Island solution per piece NFBM 2183 4452 - - - - - -
for island solution
max. length 3800 mm
Laminate finish
Grain direction wood-effect pattern
horizontal
walnut-effect No. 194
Veneered finish
Grain direction horizontal
walnut no. 303
high-gloss lacquer
Item
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
MARECUCINA plinth element for incl. in unit price 1200 SOA 5 HM L/R - 1456 - - - 2193 - -
rounded modular panel
Walnut No. 303
grain direction horizontal
and high-gloss white No. 501
Radius 50 mm
Front part 1200 mm wide
MARECUCINA plinth element for incl. in unit price 250 SOA 50 HM L/R - - - - - 1100 - -
stern-end base unit in row
High-gloss white No. 501
Radius 120 mm
Front part 250 mm wide
MARECUCINA plinth element for incl. in unit price 250 SOA 145 HM - - - - - 2193 - -
stern-end base units in island
High-gloss white No. 501
Radius 120 mm
Front part 250 mm wide
Item
width mm
universal
hinge
PV..M
The solid walnut worktop is finished with maple veneer inlays 50 mm
apart and the surface oiled.
The worktop must be re-oiled regularly, especially after being tho-
roughly cleaned and scrubbed with cleaning agents.
For further details, refer to the MARECUCINA Product information.
Item
width mm
universal
hinge
Light sail set ZLS 178 M 12815
1770 mm high
2 panel lights 1700 x 500 mm with LED lighting and transformer
3210 lumens Energy efficiency class A+
1 mast
1 mast heel with sleeve, high-gloss chrome
1 shelf, high-gloss chrome with glass
1 deflector high-gloss chrome
1 mast collar high-gloss chrome
Wood parts oiled
Miscellaneous stainless steel guy rods and connecting elements
Special constructions/
single parts
Individuality, creativity and the desire „to be different“ are becoming more and more popular. The geometry on location and the
structural situation are increasingly preventing standard units from being used.
This can be resolved with adaptations - customised products. We offer a wide range of different solutions for this.
Depending on the options for adjustments to the fronts and the interior of a unit, height, width and depth can be altered for:
ALNOCERA, ALNOCLASS, ALNODUR, ALNOFINE, ALNOGLINT, ALNOGRAND, ALNOPEARL, ALNOPLAN, ALNOPURE, ALNOSATINA, ALNO-
SOFT, ALNOSTRUCT, ALNOSUND, ALNOVETRINA.
For base units and wall units please use the surcharge MPK 1.
For tall units please use the surcharge MPK 2.
8.93
PS – Worktops
any worktop colour can be combined with any edge colour
Modular concept
The modular concept offers empty carcases for tall units as a modular
1 costruction system which can be filled with modules like open- or
closed niches, drawers, deep drawers, flap doors or lift-up doors.
6
Individual adjustments are also possible outside of our 130 mm grid
height.
5
The benefit is obvious: correct graphic display in the kitchen planning
system, straightforward handling and a defined end price.
4
3
2
8.94
Plan exceptional kitchens with ALNO. Can‘t be more individual than this!
We also adhere to applicable legal norms and DIN standards for customised products and alterations, and do not neglect the product
liability that protects you and your customers. This also includes our Edition Fly units or the safety standards for extra-deep wall units.
8.95
Item
width mm
universal
hinge
Summary of the ranges
Height and width can be altered for:
ALNOCERA, ALNOCLASS, ALNODUR, ALNOFINE, ALNOGLINT, ALNO-
GRAND, ALNOPEARL, ALNOPLAN, ALNOPURE, ALNOSATINA, ALNOSOFT,
ALNOSTRUCT, ALNOSUND, ALNOVETRINA.
None of the other ranges can be altered in height or width.
Special construction Additional charge for base and wall units MPS 2 259
Modifications (except for size reductions) of base and wall units and
base and wall shelf units
- Deep drawers for base units up to 600 mm wide with heavy-duty
runners
- carcase edge with a different colour
- unit interior in carcase finish
- deeper carcase side up to 150 mm
- different front layouts
8.96
Item
width mm
universal
hinge
Special construction Surcharge for size reductions for tall units MPK 2 520
as well as top units and tall shelf units
Height, width and depth adjustment
Width not less than 200 mm
depth reduction not less than 100 mm
on units with drawer/deep drawers: min. width 300 mm:
Reduction in depth: 710 - 642 mm, drawer 605 mm deep
Reduction in depth: 641 - 542 mm, drawer 505 mm deep
Reduction in depth: 541 - 442 mm, drawer 405 mm deep
Reduction in depth: 441 - 392 mm, drawer 355 mm deep
Reduction in depth: 391 - 342 mm, drawer 305 mm deep
changes (apart from reductions) to tall and top units as well as tall
shelf units
- for changed front layout
- deeper carcase side up to 150 mm
- hinged door instead of a flap door or deep drawer
- alteration of a tall unit for built-in appliances which are not
customary in the market
8.97
high-gloss lacquer
Item
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Description of special models MPSONDER
Use in design systems to describe other
special requests
Price on request
Carcase material per m² KMM 1200 230 1185 319 - 614 914 - -
per m² KMM 1200 W 230 1185 319 - 614 914 - -
16 mm thick
Max. dimensions
Finish and gloss laminate
horizontal:
2600 mm long and 1600 mm high
vertical:
1600 mm long and 2600 mm high
both sides in all visible side colours
with thick edge on all sides
Veneered finish
horizontal:
2600 mm long and 1000 mm high
Veneer edge
vertical:
1000 mm long and 2600 mm high
Veneer edge
High-gloss lacquer finish/ gloss
lacquer
length 2580 mm
width 1000 mm
Lacquered on one side with thick-edge
gloss laminate. Gloss lacquer on both
sides.
Matt lacquer finish / textured lacquer
length 2600 mm
width 1400 mm
Lacquered on one side
lacquered edge
Minimum calculation 0.4 m²
at least 60 x 100 mm, or 100 x 60 mm
Matching accessories:
Panel protector 2500 mm long ZW 16.
8.98
high-gloss lacquer
Item
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Carcase material per m² KMO 1000 161 - 251 - - 846 - -
per m² KMO 1000 W 161 - 251 - - 846 - -
same as above, but
no edges on all sides
Minimum calculation 0.4 m²
per metre
8.99
high-gloss lacquer
Item
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Shelves for 300 mm unit width 266 EFA 30 41 - - - - - - - 26
for 400 mm unit width 366 EFA 40 41 - - - - - - - 32
for base and tall units for 450 mm unit width 416 EFA 45 41 - - - - - - - 32
in carcase depth 410 mm
for 500 mm unit width 466 EFA 50 41 - - - - - - - 32
337 mm deep for 600 mm unit width 566 EFA 60 41 - - - - - - - 42
Shelves for open shelf units for open shelf units, 300 mm wide 266 EFAR 30 35 32 232 42 50 126 183 - -
for open shelf units, 450 mm wide 416 EFAR 45 35 42 284 50 60 148 243 - -
for wall open shelf units for open shelf units, 500 mm wide 466 EFAR 50 35 42 302 52 62 155 258 - -
348 mm deep
for open shelf units, 600 mm wide 566 EFAR 60 35 42 317 55 66 164 294 - -
For colours and versions, for variable in width shelf units 566 EFAR 00 35 42 317 55 66 164 294 - -
refer to colour matrix carcase
Specify shelf width when ordering!
Shelves for open shelf units for variable in width 566 EFAR 00 56 50 363 70 84 190 323 - -
shelf units
for base shelf units, 541 mm deep
8.100
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Front material, with edging all-round FMM 1200 296 333 356 - - - - - -
per m²
depending on range
laminate or veneered
max. 2600 x 1200 mm
apart from fronts with horizontal graining
in ALNOPLAN:
max. 2050 x 1200 mm
at least 32 x 250 mm, or 250 x 32 mm
Minimum calculation 0.4 m²
Door panel lacquered FMM 1100 - - - 813 813 813 877 985 -
per m²
max. 2600 x 900 mm
at least 32 x 250 mm, or 250 x 32 mm
Minimum calculation 0.4 m²
8.101
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Front panel EFB 60 3 74 80 84 94 106 129 132 139 266
EFB 90 3 78 82 87 97 108 131 135 141 268
for niche adjustment
for appliance housings
32 mm high
Infill panel for sink unit ESB 30 79 85 90 104 118 137 144 150 247
ESB 40 80 87 92 105 119 138 145 152 265
126 mm high ESB 45 84 91 96 110 124 145 150 156 273
120 cm width is not available in ESB 50 87 96 102 119 131 150 156 166 284
ALNOBRIT and ALNOPOL! ESB 60 96 105 107 124 142 166 170 175 300
ESB 80 100 108 113 134 150 174 176 184 340
ESB 90 103 112 119 137 154 177 182 186 361
ESB 100 105 119 122 146 165 187 191 198 389
ESB 120 119 130 134 159 179 205 211 225 416
8.102
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Deep drawer front EAV 30 26 79 95 109 126 145 197 205 218 339
EAV 40 26 84 103 118 134 156 205 211 227 348
256 mm high EAV 45 26 89 109 122 139 161 211 217 233 353
120 cm width is not available in EAV 50 26 94 114 130 142 165 223 232 253 394
ALNOBRIT and ALNOPOL! EAV 60 26 102 117 133 150 170 230 245 255 397
EAV 80 26 118 128 135 164 198 248 256 274 482
EAV 90 26 126 134 142 170 205 255 269 282 490
EAV 100 26 133 142 151 179 216 266 275 292 500
EAV 120 26 142 152 164 194 232 283 291 308 514
Flap door EKS 30 26 90 106 121 138 157 209 216 231 350
EKS 45 26 101 121 134 151 173 222 230 244 363
256 mm high EKS 50 26 105 126 141 154 177 236 243 264 404
for soft closing
available without pneumatic spring EKS 60 26 113 130 144 161 183 241 257 266 407
EKS 80 26 131 139 147 176 210 260 267 287 495
EKS 90 26 138 145 154 183 216 266 282 293 501
Deep drawer front EAV 30 32 81 99 114 130 151 202 208 232 346
EAV 40 32 87 106 123 138 160 211 217 244 372
321 mm high EAV 45 32 91 112 126 142 163 215 226 253 385
120 cm width is not available in EAV 50 32 96 116 132 145 168 224 238 268 414
ALNOBRIT and ALNOPOL! EAV 60 32 103 122 138 156 175 214 258 273 438
EAV 80 32 121 131 142 171 202 251 267 289 527
EAV 90 32 128 137 152 179 210 264 279 294 552
EAV 100 32 136 145 159 188 222 279 289 309 578
EAV 120 32 145 158 174 203 239 298 308 327 596
Deep drawer front EAV 30 39 82 102 118 133 155 205 210 242 352
EAV 40 39 89 109 126 142 164 217 224 261 397
386 mm high EAV 45 39 92 114 130 144 165 219 233 272 417
120 cm width is not available in EAV 50 39 98 117 133 150 170 226 243 283 437
ALNOBRIT and ALNOPOL! EAV 60 39 104 126 142 161 179 236 271 291 480
EAV 80 39 122 134 150 179 204 254 277 303 572
EAV 90 39 130 141 160 187 215 271 289 308 612
EAV 100 39 138 150 166 196 227 292 301 324 656
EAV 120 39 150 163 185 211 246 312 323 349 677
Flap door EKS 30 39 94 113 131 144 166 216 221 254 362
EKS 40 39 101 121 138 154 176 230 237 272 407
386 mm high EKS 45 39 104 126 141 156 177 232 244 285 427
for soft closing
available without pneumatic spring EKS 50 39 109 130 144 161 183 238 255 294 448
EKS 60 39 115 138 154 173 190 247 284 302 493
120 cm width is not available in EKS 80 39 134 145 161 190 215 265 290 315 582
ALNOBRIT and ALNOPOL! EKS 90 39 141 153 171 198 227 284 300 319 624
EKS 100 39 150 161 179 208 239 303 313 337 667
EKS 120 39 161 175 196 222 258 323 336 361 689
Lift-up door EL 60 39 170 193 209 228 245 302 339 357 545
Wall unit door ETH 30 39 123 145 160 176 195 247 254 284 394
ETH 40 39 133 152 167 186 207 261 267 303 436
386 mm high ETH 45 39 136 156 173 188 208 263 274 314 456
ETH 50 39 140 159 176 192 214 268 285 324 476
ETH 60 39 148 167 186 204 221 277 313 335 521
Lift-up door ETHS 45 39 107 130 144 159 181 235 247 288 430
ETHS 50 39 112 133 148 164 186 241 258 297 451
for OSL... ETHS 60 39 118 141 157 176 193 250 287 306 495
available without pneumatic spring
ETHS 80 39 137 149 164 193 218 268 293 318 585
386 mm high ETHS 90 39 144 156 175 202 231 287 303 322 627
ETHS 100 39 153 164 182 211 242 307 316 340 670
120 cm width is not available in ETHS 120 39 164 179 200 226 261 326 339 364 691
ALNOBRIT and ALNOPOL!
8.103
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Glass lift-up door ETHGSN 45 39 461 461 461 461 461 461 461 461 461
ETHGSN 50 39 473 473 473 473 473 473 473 473 473
in neutral glass front No. 535 and No. 538 ETHGSN 60 39 498 498 498 498 498 498 498 498 498
for OGSLN...
available without pneumatic spring ETHGSN 80 39 620 620 620 620 620 620 620 620 620
ETHGSN 90 39 645 645 645 645 645 645 645 645 645
386 mm high ETHGSN 100 39 661 661 661 661 661 661 661 661 661
Tall unit door ETSO 30 39 123 145 160 176 195 247 254 284 394
ETSO 45 39 136 156 173 188 208 263 274 314 456
top, for appliance tall units ETSO 50 39 140 159 176 192 214 268 285 324 476
386 mm high ETSO 60 39 148 167 186 204 221 277 313 335 521
Base unit door ETU 40 39 133 152 167 186 207 261 267 303 436
ETU 45 39 136 156 173 188 208 263 274 314 456
386 mm high ETU 50 39 140 159 176 192 214 268 285 324 476
ETU 60 39 148 167 186 204 221 277 313 335 521
Base unit door ETU 30 52 133 160 167 192 221 271 277 306 460
ETU 40 52 140 167 185 210 230 296 301 329 517
516 mm high ETU 45 52 144 174 192 217 238 304 309 340 541
ETU 50 52 148 179 203 224 249 313 319 348 571
ETU 60 52 156 185 217 243 266 330 342 367 627
Wall unit door ETH 30 52 133 160 167 192 221 271 277 306 460
ETH 40 52 140 167 185 210 230 296 301 329 517
516 mm high ETH 45 52 144 174 192 217 238 304 309 340 541
ETH 50 52 148 179 203 224 249 313 319 348 571
ETH 60 52 156 185 217 243 266 330 342 367 627
Upward folding door EL 45 52 167 208 234 267 312 412 424 454 696
EL 50 52 176 218 248 273 320 437 452 495 776
available without pneumatic spring EL 60 52 193 224 255 289 330 448 479 499 782
516 mm high EL 80 52 227 244 259 318 387 486 501 539 956
EL 90 52 242 257 273 330 399 499 528 552 969
EL 100 52 255 273 291 346 422 522 541 573 989
Upward folding glass door ELGN 60 52 882 882 882 882 882 882 882 882 882
ELGN 80 52 1114 1114 1114 1114 1114 1114 1114 1114 1114
in neutral glass front No. 535 and No. 538 ELGN 90 52 1159 1159 1159 1159 1159 1159 1159 1159 1159
available without pneumatic spring
ELGN 100 52 1192 1192 1192 1192 1192 1192 1192 1192 1192
516 mm high
Upward folding door ELGMN 60 52 538 554 568 585 607 665 681 691 810
ELGMN 80 52 670 679 686 716 750 800 807 826 1007
in neutral glass front No. 535 and No. 538 ELGMN 90 52 700 708 716 745 778 828 844 855 1035
for OGMLN...
available without pneumatic spring ELGMN 100 52 723 733 742 769 807 857 867 882 1061
516 mm high
Base unit door ETU 30 58 139 161 183 207 235 288 297 328 485
ETU 40 58 147 170 195 222 247 306 314 344 549
581 mm high ETU 45 58 151 177 201 228 256 314 323 354 578
ETU 50 58 154 181 208 234 262 320 335 365 608
ETU 60 58 161 187 221 249 275 338 354 388 671
Deep drawer front EAV 15 65 94 109 141 167 192 242 256 293 374
EAV 30 65 101 122 156 179 207 260 275 310 472
646 mm high EAV 45 65 115 136 167 196 230 282 293 324 575
EAV 50 65 118 138 169 201 233 285 306 338 606
EAV 60 65 126 145 182 213 245 301 322 365 674
8.104
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Deep drawer front EAV 45 65 1 115 136 167 196 230 282 293 324 575
EAV 50 65 1 118 138 169 201 233 285 306 338 606
for SPA 45/ 50/ 60 65 EAV 60 65 1 126 145 182 213 245 301 322 365 674
646 mm high
Base unit door ETU 15 65 137 152 185 210 235 284 299 337 415
ETU 30 65 144 163 196 221 249 302 318 353 512
646 mm high ETU 40 65 152 173 206 235 264 314 326 357 580
ETU 45 65 157 180 210 238 271 323 337 367 614
ETU 50 65 160 182 213 243 274 326 348 379 646
ETU 60 65 167 189 224 256 287 343 365 407 714
Wall unit door ETH 27 65 140 160 193 218 246 299 313 353 509
ETH 30 65 144 163 196 221 249 302 318 353 512
646 mm high ETH 40 65 152 173 206 235 264 314 326 357 580
ETH 45 65 157 180 210 238 271 323 337 367 614
ETH 50 65 160 182 213 243 274 326 348 379 646
ETH 55 65 162 184 217 245 279 338 359 392 681
ETH 60 65 167 189 224 256 287 343 365 407 714
Wall unit glass door ETHG 45 65 210 284 324 398 485 536 593 724 751
ETHG 50 65 214 291 342 415 501 557 610 755 780
646 mm high ETHG 60 65 221 308 357 430 533 593 649 791 809
For glass choices refer to
section Glass types
Wall unit segmented glass door ETHGSM 45 65 210 284 324 398 485 - - 724 751
ETHGSM 50 65 214 291 342 415 501 - - 755 780
646 mm high ETHGSM 60 65 221 308 357 430 533 - - 791 809
For glass choices refer to
section Glass types
Wall unit glass door ETHGN 45 65 546 546 546 546 546 546 546 546 546
ETHGN 50 65 562 562 562 562 562 562 562 562 562
in neutral glass front No. 535 and No. 538 ETHGN 60 65 599 599 599 599 599 599 599 599 599
646 mm high
Upward folding door EL 45 65 171 214 242 273 316 420 442 495 760
EL 50 65 181 222 253 281 326 440 465 526 818
available without pneumatic spring EL 60 65 195 234 265 301 340 418 505 537 866
646 mm high EL 80 65 232 250 273 334 393 493 524 566 1043
EL 90 65 244 263 293 346 409 518 548 577 1092
EL 100 65 261 281 308 365 435 548 566 607 1148
Upward folding glass door ELGN 60 65 896 896 896 896 896 896 896 896 896
ELGN 80 65 1133 1133 1133 1133 1133 1133 1133 1133 1133
in neutral glass front No. 535 and No. 538 ELGN 90 65 1179 1179 1179 1179 1179 1179 1179 1179 1179
for OGLN...
ELGN 100 65 1214 1214 1214 1214 1214 1214 1214 1214 1214
646 mm high
available without pneumatic spring
8.105
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Upward folding door ELGMN 60 65 546 564 580 599 617 657 700 716 859
ELGMN 80 65 682 692 704 733 763 813 828 850 1060
in neutral glass front No. 535 and No. 538 ELGMN 90 65 712 721 736 763 795 849 864 878 1107
for OGMLN...
available without pneumatic spring ELGMN 100 65 737 747 761 789 824 880 890 910 1151
646 mm high
Lift-up door ETHS 45 65 131 151 183 211 244 296 308 340 590
ETHS 50 65 134 153 185 215 247 299 320 352 620
for OSL... ETHS 60 65 141 160 196 228 260 316 338 379 689
available without pneumatic spring
ETHS 80 65 150 203 239 281 325 389 437 487 789
646 mm high ETHS 90 65 154 217 253 301 360 422 472 523 824
Glass lift-up door ETHGSN 45 65 329 329 329 329 329 329 329 329 329
ETHGSN 50 65 339 339 339 339 339 339 339 339 339
in neutral glass front No. 535 and No. 538 ETHGSN 60 65 357 357 357 357 357 357 357 357 357
for OGSLN...
available without pneumatic spring ETHGSN 80 65 431 431 431 431 431 431 431 431 431
ETHGSN 90 65 449 449 449 449 449 449 449 449 449
646 mm high
Pair of doors for corner wall unit ETHE 22 65 233 276 343 392 447 551 582 659 975
ETHE 27 65 249 290 355 406 459 567 595 665 986
646 mm high ETHE 40 65 296 341 402 457 525 629 655 716 1212
ETHE 50 65 307 349 417 472 540 657 699 765 1345
Deep drawer front EAV 15 72 97 123 155 180 205 258 272 308 385
EAV 45 72 117 163 195 220 239 293 314 357 610
711 mm high EAV 50 72 121 167 200 224 243 300 324 368 648
EAV 60 72 134 177 212 241 257 313 343 391 724
Deep drawer front EAV 45 72 1 117 163 195 220 239 293 314 357 610
EAV 50 72 1 121 167 200 224 243 300 324 368 648
for SPA 45 72/50 72/60 72 EAV 60 72 1 134 177 212 241 257 313 343 391 724
711 mm high
Deep drawer front EAV 60 72 2 134 177 212 241 257 313 343 391 724
for SPAM 60 72 1
711 mm high
Base unit door ETU 15 72 139 165 196 221 247 300 314 349 425
ETU 30 72 148 193 227 253 262 319 336 384 536
711 mm high ETU 40 72 156 203 235 262 274 329 345 392 611
ETU 45 72 160 207 238 264 283 337 357 401 650
ETU 50 72 163 211 243 267 287 343 368 412 687
ETU 60 72 177 220 256 285 300 356 386 434 765
Base unit door ETU 30 72 20 190 241 277 307 320 386 404 456 628
ETU 40 72 20 198 250 286 316 334 396 414 463 704
with drawer line ETU 45 72 20 203 255 289 318 341 402 426 473 742
711 mm high
ETU 50 72 20 206 259 294 321 345 408 437 483 779
ETU 60 72 20 219 268 307 339 359 422 454 506 857
Pair of doors for corner base unit ETUE 80 72 163 232 299 346 395 509 539 645 950
ETUE 90 72 187 275 342 395 422 532 564 660 1070
for carousel
711 mm high
8.106
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Pair of doors for corner base unit ETUE 80 72 2 248 326 401 454 511 641 677 789 1133
ETUE 90 72 2 271 371 444 503 539 664 702 804 1254
with drawer line
for carousel
711 mm high
Display unit glass door ETVGN 45 72 549 549 549 549 549 549 549 549 549
ETVGN 50 72 567 567 567 567 567 567 567 567 567
in neutral glass front No. 535 and No. 538 ETVGN 60 72 605 605 605 605 605 605 605 605 605
711 mm high
Deep drawer front EAV 15 78 98 135 166 191 215 275 287 320 397
EAV 45 78 122 166 203 223 248 307 334 392 648
776 mm high EAV 50 78 126 170 207 228 253 316 345 400 689
EAV 60 78 136 180 216 245 272 326 363 417 773
Deep drawer front EAV 45 78 1 122 166 203 223 248 307 334 392 648
EAV 50 78 1 126 170 207 228 253 316 345 400 689
for SPA 45/50/60 EAV 60 78 1 136 180 216 245 272 326 363 417 773
776 mm high
Deep drawer front EAV 60 78 2 136 180 216 245 272 326 363 417 773
for SPAM 60 1
776 mm high
Base unit door ETU 15 78 140 179 209 234 258 318 328 363 436
ETU 30 78 151 196 235 256 275 336 353 415 560
776 mm high ETU 40 78 159 205 243 263 286 345 363 424 644
ETU 45 78 163 209 245 266 291 349 376 435 685
ETU 50 78 167 214 249 270 296 359 388 443 729
ETU 60 78 180 222 260 287 314 369 405 458 814
Base unit door ETU 30 78 20 193 244 286 310 335 401 422 487 652
ETU 40 78 20 202 253 294 317 344 410 431 497 734
with drawer line ETU 45 78 20 206 257 296 320 349 415 446 507 777
776 mm high
ETU 50 78 20 210 262 300 324 354 424 456 514 822
ETU 60 78 20 221 270 311 341 372 435 474 530 906
Pair of doors for corner base unit ETUE 80 78 167 261 336 375 420 539 573 702 993
ETUE 90 78 185 275 348 387 435 552 592 717 1090
for carousel
776 mm high
Pair of doors for corner base unit ETUE 80 78 2 253 356 437 483 537 670 711 847 1177
ETUE 90 78 2 269 371 450 495 552 683 730 861 1274
with drawer line
for carousel
776 mm high
Tall unit door ETSU 60 78 180 222 260 287 314 369 405 458 814
776 mm high
8.107
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit door ETH 27 78 140 187 223 245 266 324 342 403 552
ETH 30 78 151 196 235 256 275 336 353 415 560
776 mm high ETH 40 78 159 205 243 263 286 345 363 424 644
ETH 45 78 163 209 245 266 291 349 376 435 685
ETH 50 78 167 214 249 270 296 359 388 443 729
ETH 55 78 173 217 256 284 308 365 395 455 769
ETH 60 78 180 222 260 287 314 369 405 458 814
Wall unit glass door ETHG 45 78 214 342 402 451 501 581 638 775 807
ETHG 50 78 217 348 415 465 512 603 665 797 829
776 mm high ETHG 60 78 224 366 441 488 552 652 709 844 866
For glass choices refer to
section Glass types
Not available for ALNOCERA, ALNOSATINA
and ALNOVETRINA.
Wall unit segmented glass door ETHGSM 45 78 214 342 402 451 501 - - 775 807
ETHGSM 50 78 217 348 415 465 512 - - 797 829
776 mm high ETHGSM 60 78 224 366 441 488 552 - - 844 866
For glass choices refer to
section Glass types
Not available for ALNOART, ALNOBRIT,
ALNOPOL and ALNOSHAPE.
Wall unit glass door ETHGN 45 78 580 580 580 580 580 580 580 580 580
ETHGN 50 78 603 603 603 603 603 603 603 603 603
in neutral glass front No. 535 and No. 538 ETHGN 60 78 643 643 643 643 643 643 643 643 643
776 mm high
Display unit glass door ETVGN 45 78 580 580 580 580 580 580 580 580 580
ETVGN 50 78 610 610 610 610 610 610 610 610 610
in neutral glass front No. 535 and No. 538 ETVGN 60 78 643 643 643 643 643 643 643 643 643
776 mm high
Display unit glass door ETVG 45 78 217 346 407 456 507 589 646 784 817
ETVG 50 78 220 352 420 470 518 610 673 806 839
776 mm high ETVG 60 78 227 370 446 494 558 659 717 854 877
For glass choices refer to
section Glass types
Display unit segmented glass door ETVGS 45 78 217 346 407 456 507 - - 784 847
ETVGS 50 78 220 352 420 470 518 - - 806 870
776 mm high ETVGS 60 78 227 370 446 494 558 - - 854 911
For glass choices refer to
section Glass types
Pair of doors for corner wall unit ETHE 22 78 249 343 415 455 502 620 653 781 1067
ETHE 27 78 262 355 429 472 514 631 665 788 1085
776 mm high ETHE 40 78 309 400 472 514 563 680 735 852 1354
ETHE 50 78 327 417 494 549 598 712 771 893 1521
8.108
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit upward folding door EL 45 78 174 218 248 277 320 428 454 534 823
EL 50 78 185 224 255 289 330 442 475 554 863
776 mm high EL 60 78 197 242 273 312 346 460 532 571 952
available without pneumatic spring
EL 80 78 234 257 289 346 397 497 546 596 1133
EL 90 78 248 271 310 363 420 532 566 605 1215
EL 100 78 265 289 322 381 444 573 592 639 1303
Wall unit upward folding door with ELGN 60 78 906 906 906 906 906 906 906 906 906
glass ELGN 80 78 1150 1150 1150 1150 1150 1150 1150 1150 1150
ELGN 90 78 1203 1203 1203 1203 1203 1203 1203 1203 1203
in neutral glass front No. 535 and No. 538
for OGLN... ELGN 100 78 1232 1232 1232 1232 1232 1232 1232 1232 1232
776 mm high
available without pneumatic spring
Wall unit upward folding door with ELGMN 60 78 552 574 590 609 626 683 719 738 906
glass ELGMN 80 78 692 704 719 748 773 823 848 873 1113
ELGMN 90 78 725 737 757 783 812 868 884 904 1179
in neutral glass front No. 535 and No. 538
for OGMLN... ELGMN 100 78 749 761 777 807 838 903 912 935 1236
776 mm high
available without pneumatic spring
Tall unit door ETSO 30 84 154 206 244 270 300 354 377 429 583
ETSO 45 84 167 218 255 285 314 375 408 456 720
at top ETSO 50 84 171 222 258 291 322 384 418 465 767
841 mm high ETSO 60 84 182 231 268 304 342 401 439 487 859
Wall unit door ETH 27 91 148 204 239 272 310 360 392 430 595
ETH 30 91 157 214 249 284 321 369 401 442 604
906 mm high ETH 40 91 163 221 260 291 327 392 421 455 703
ETH 45 91 167 224 264 300 337 399 437 476 751
ETH 50 91 173 230 266 308 345 408 446 486 802
ETH 55 91 179 235 270 311 354 417 451 502 851
ETH 60 91 183 238 274 321 366 430 468 513 900
Wall unit glass door ETHG 45 91 217 348 409 469 577 659 733 807 838
ETHG 50 91 221 357 422 490 594 681 757 829 861
906 mm high ETHG 60 91 230 373 447 516 632 731 805 880 902
For glass choices refer to
section Glass types
Wall unit segmented glass door ETHGSM 45 91 217 348 409 469 577 - - 807 838
ETHGSM 50 91 221 357 422 490 594 - - 829 861
906 mm high ETHGSM 60 91 230 373 447 516 632 - - 880 902
For glass choices refer to
section Glass types
Wall unit glass door ETHGN 45 91 668 668 668 668 668 668 668 668 668
ETHGN 50 91 687 687 687 687 687 687 687 687 687
in neutral glass front No. 535 and No. 538 ETHGN 60 91 735 735 735 735 735 735 735 735 735
906 mm high
8.109
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Pair of doors for corner wall unit ETHE 22 91 262 374 449 514 591 691 750 830 1162
ETHE 27 91 276 390 459 527 602 701 765 844 1173
906 mm high ETHE 40 91 317 431 510 582 655 779 856 934 1484
ETHE 50 91 339 451 523 604 691 816 883 985 1684
Tall unit door ETSU 60 91 183 238 274 321 366 430 468 513 900
bottom
906 mm high
Display unit glass door ETVGN 45 91 668 668 668 668 668 668 668 668 668
ETVGN 50 91 696 696 696 696 696 696 696 696 696
in neutral glass front No. 535 and No. 538 ETVGN 60 91 735 735 735 735 735 735 735 735 735
906 mm high
Display unit glass door ETVG 45 91 217 348 409 469 577 659 733 807 838
ETVG 50 91 224 362 427 496 601 690 765 839 871
906 mm high ETVG 60 91 230 373 447 516 632 731 805 880 902
For glass choices refer to
section Glass types
Display unit segmented glass door ETVGS 45 91 220 352 414 474 584 - - 817 880
ETVGS 50 91 221 357 422 490 594 - - 829 891
906 mm high ETVGS 60 91 232 377 452 523 640 - - 891 947
For glass choices refer to
section Glass types
Display unit door ETV 30 91 159 217 252 287 325 373 406 447 611
ETV 40 91 165 224 263 294 332 396 426 461 711
906 mm high ETV 45 91 169 227 267 304 341 404 443 482 760
ETV 50 91 175 232 269 311 349 413 451 492 811
ETV 60 91 185 241 278 325 370 436 473 519 910
Tall unit door ETSO 30 97 161 219 254 289 326 374 406 447 610
ETSO 45 97 170 227 267 303 340 402 441 479 755
at top ETSO 50 97 175 232 269 310 348 411 449 490 805
971 mm high ETSO 60 97 190 246 283 328 373 439 475 521 907
Tall unit door ETSM 60 97 189 245 283 327 372 437 474 520 905
middle
971 mm high
Tall unit door ETSU 60 104 196 266 304 357 415 486 547 556 944
bottom
1036 mm high
8.110
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Tall unit door ETSO 60 104 196 266 304 357 415 486 547 556 944
middle/top
1036 mm high
Tall unit door ETSU 60 117 203 270 308 366 430 512 580 657 986
bottom
1166 mm high
Tall unit door ETSO 60 117 203 270 308 366 430 512 580 657 986
middle/top
1166 mm high
Tall unit door ETSO 30 123 181 250 284 328 387 436 492 583 671
ETSO 45 123 193 262 298 355 421 473 548 639 823
at top ETSO 50 123 197 268 307 366 429 506 556 643 863
1231 mm high ETSO 60 123 209 277 317 373 450 530 605 686 1042
Tall unit door ETSM 60 123 209 277 317 373 450 530 605 686 1042
middle
1231 mm high
Wall unit door ETH 45 130 196 264 304 362 430 528 629 664 1034
ETH 50 130 201 268 309 370 448 540 655 686 1103
1296 mm high ETH 60 130 210 279 318 377 473 566 702 735 1238
Larder unit pull-out front EAV 30 130 147 214 250 293 354 443 538 552 784
EAV 45 130 156 222 264 321 392 487 589 624 997
1296 mm high
Tall unit door ETSO 60 130 210 279 318 377 473 566 702 735 1238
at top
1296 mm high
Tall unit door ETSM 60 130 210 279 318 377 473 566 702 735 1238
middle
1296 mm high
Tall unit door ETS 30 130 187 254 291 333 394 482 578 592 823
ETS 45 130 196 264 304 362 430 528 629 664 1034
1296 mm high ETS 50 130 201 268 309 370 448 540 655 686 1103
ETS 60 130 210 279 318 377 473 566 702 735 1238
8.111
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Tall unit door ETSW 60 130 346 375 393 412 428 - - 503 613
for wine fridge
Niche height 878 mm - 1225 mm
Door various sizes 906 - 1296 mm
Handle arrangement only vertical
Tall unit door dowelled ETSO 30 136 M 259 340 390 440 497 597 634 705 979
ETSO 45 136 M 281 358 415 466 522 641 691 769 1188
at top ETSO 50 136 M 291 366 420 477 537 655 708 789 1259
1361 mm high (971+386 mm) ETSO 60 136 M 311 389 444 507 570 692 764 830 1406
Tall unit door dowelled ETSM 60 136 M 311 389 444 507 570 692 764 830 1406
middle
1365 mm high (971+386 mm)
Tall unit door dowelled ETSM 60 136 1 M 311 389 444 507 570 692 764 830 1406
middle
1365 mm high (386+971 mm)
Larder unit pull-out front EAV 30 156 224 322 395 437 479 594 630 753 1049
EAV 45 156 255 344 416 458 507 624 677 794 1305
1556 mm high
Tall unit door dowelled ETS 30 156 275 367 444 486 526 645 681 804 1097
ETS 45 156 301 393 465 507 556 672 727 845 1346
1556 mm high (776+776 mm) ETS 50 156 310 404 474 517 568 694 751 861 1439
ETS 60 156 334 420 495 548 603 713 785 891 1604
Tall unit door dowelled ETS 30 156 M 276 374 446 498 537 649 687 789 1095
ETS 45 156 M 302 400 468 524 571 686 742 832 1347
1556 mm high (711+841 mm) ETS 50 156 M 309 408 476 532 583 702 761 852 1432
ETS 60 156 M 334 426 499 564 617 732 799 897 1600
Tall unit door dowelled ETS 60 169 337 435 509 582 655 774 848 947 1689
1686 mm high (776+906 mm)
Tall unit door dowelled ETS 60 169 M 342 442 514 589 649 770 835 930 1649
1690 mm high (711+971 mm)
8.112
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Tall unit door for wine fridge ETSW 60 195 461 505 532 560 584 - - 697 862
niche height 1400 - 1780 mm
Door various sizes 1426 - 1946 mm
Handle arrangement only vertical
Tall unit door dowelled ETS 30 195 298 414 479 552 618 724 798 937 1179
ETS 45 195 322 440 506 589 672 777 873 1008 1442
1946 mm high (776+1166 mm) ETS 50 195 330 449 520 603 685 819 893 1023 1521
ETS 60 195 356 468 542 627 719 856 960 1089 1777
Tall unit door dowelled ETS 30 195 M 298 414 480 552 618 725 797 937 1179
ETS 45 195 M 323 441 506 591 674 780 876 1010 1445
1946 mm high (711+1231 mm) ETS 50 195 M 330 450 521 604 686 820 896 1025 1523
ETS 60 195 M 357 469 544 628 721 858 961 1092 1781
Larder unit pull-out front dowelled EAV 30 195 236 355 419 490 560 663 735 876 1120
EAV 45 195 263 378 446 527 611 717 811 947 1386
1946 mm high (776+1166 mm)
Tall unit door dowelled ETS 30 208 308 420 496 558 640 788 902 977 1355
ETS 45 208 329 444 520 599 692 848 976 1069 1691
2076 mm high (776+1296 mm) ETS 50 208 339 453 528 611 714 869 1012 1099 1804
ETS 60 208 360 472 549 634 758 906 1078 1164 2025
Larder unit pull-out front dowelled EAV 30 208 246 363 435 499 581 726 840 916 1295
EAV 45 208 270 381 459 538 632 786 914 1008 1636
2076 mm high (776+1296 mm)
Tall unit door dowelled ETS 60 221 427 555 644 746 859 1055 1174 1314 2143
for SE 105 221
2206 mm high (776+1166+256 mm)
Larder unit pull-out front dowelled EAV 30 221 284 419 498 585 674 829 909 1064 1430
EAV 45 221 321 457 537 635 742 898 998 1148 1711
2206 mm high (776+1166+256 mm)
Drawer ES 30 168 175 180 193 207 224 233 238 327
ES 40 169 176 182 194 208 226 234 240 346
for carcase depth 560 mm ES 45 174 181 186 200 213 234 238 244 354
126 mm high ES 50 176 186 191 208 219 238 244 254 363
ES 60 186 194 196 213 231 254 258 263 378
120 cm width is not available in ES 80 205 212 217 237 253 276 279 286 432
ALNOBRIT and ALNOPOL! ES 90 207 216 222 240 257 281 284 288 454
ES 100 209 222 226 249 267 289 293 299 479
ES 120 222 234 237 262 282 307 312 326 506
8.113
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Drawer ES 30 7 180 186 190 204 217 236 243 248 338
ES 40 7 181 187 192 205 218 237 244 250 356
same as above, but ES 45 7 185 191 196 210 223 244 248 255 363
for carcase depth 710 mm
ES 50 7 187 196 202 218 231 248 255 264 374
ES 60 7 196 205 207 223 241 264 268 273 389
ES 80 7 218 226 232 250 266 291 293 299 446
ES 90 7 220 231 237 254 270 294 297 301 467
ES 100 7 222 237 240 263 282 302 307 313 494
Drawer ES 30 4 168 175 180 193 207 224 233 238 327
ES 40 4 169 176 182 194 208 226 234 240 346
same as above, but ES 45 4 174 181 186 200 213 234 238 244 354
for carcase depth 410 mm
ES 50 4 176 186 191 208 219 238 244 254 363
ES 60 4 186 194 196 213 231 254 258 263 378
ES 80 4 205 212 217 237 253 276 279 286 432
ES 90 4 207 216 222 240 257 281 284 288 454
ES 100 4 209 222 226 249 267 289 293 299 479
Drawer ES 30 3 168 175 180 193 207 224 233 238 327
ES 40 3 169 176 182 194 208 226 234 240 346
same as above, but ES 45 3 174 181 186 200 213 234 238 244 354
for carcase depth 350 mm
ES 50 3 176 186 191 208 219 238 244 254 363
ES 60 3 186 194 196 213 231 254 258 263 378
Drawer for hob units ESN 60 186 194 196 213 231 254 258 263 378
ESN 80 205 212 217 237 253 276 279 286 432
for carcase depth 560 mm ESN 90 207 216 222 240 257 281 284 288 454
126 mm high ESN 100 209 222 226 249 267 289 293 299 479
with low frame ESN 120 222 234 237 262 282 307 312 326 506
Plinth container EASW 60 18 276 284 295 309 342 394 402 418 551
for carcase depth 560 mm
179 mm high
Deep drawer EA 30 26 189 205 219 237 256 308 315 328 444
EA 40 26 194 213 230 244 266 315 321 338 453
for carcase depth 560 mm EA 45 26 200 219 233 249 271 321 327 343 457
256 mm high EA 50 26 204 224 240 253 275 335 342 363 498
EA 60 26 212 228 243 260 282 340 355 365 501
120 cm width is not available in EA 80 26 269 277 286 315 349 399 406 425 626
ALNOBRIT and ALNOPOL! EA 90 26 276 285 293 321 355 405 420 431 632
EA 100 26 284 293 301 328 367 417 426 443 644
EA 120 26 293 302 315 345 381 432 442 458 658
Deep drawer EA 30 26 7 202 217 233 249 268 320 327 342 456
EA 40 26 7 207 226 242 257 279 327 335 350 464
same as above, but EA 45 26 7 212 233 245 262 285 335 341 355 470
for carcase depth 710 mm
EA 50 26 7 216 238 253 265 289 347 354 375 510
EA 60 26 7 224 241 256 272 294 352 368 377 513
EA 80 26 7 284 292 299 328 363 413 420 440 639
EA 90 26 7 291 298 307 336 369 419 434 446 647
EA 100 26 7 297 307 315 343 380 430 441 456 656
Deep drawer EA 30 26 4 189 205 219 237 256 308 315 328 444
EA 40 26 4 194 213 230 244 266 315 321 338 453
same as above, but EA 45 26 4 200 219 233 249 271 321 327 343 457
for carcase depth 410 mm
EA 50 26 4 204 224 240 253 275 335 342 363 498
EA 60 26 4 212 228 243 260 282 340 355 365 501
EA 80 26 4 269 277 286 315 349 399 406 425 626
EA 90 26 4 276 285 293 321 355 405 420 431 632
EA 100 26 4 284 293 301 328 367 417 426 443 644
8.114
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Deep drawer for sink base unit EASP 60 26 4 212 228 243 260 282 340 355 365 501
EASP 80 26 4 269 277 286 315 349 399 406 425 626
With low back panel, reduced 150 mm EASP 90 26 4 276 285 293 321 355 405 420 431 632
from the back.
for carcase depth 560 mm EASP 100 26 4 284 293 301 328 367 417 426 443 644
256 mm high
Deep drawer EA 30 32 191 209 224 240 261 312 318 342 451
EA 40 32 197 216 234 248 270 321 327 354 478
for carcase depth 560 mm EA 45 32 202 222 237 253 273 325 337 363 490
321 mm high EA 50 32 206 227 242 256 279 336 348 378 519
EA 60 32 213 233 248 266 286 324 368 384 544
120 cm width is not available in EA 80 32 271 282 293 322 352 402 418 440 669
ALNOBRIT and ALNOPOL! EA 90 32 277 288 302 328 361 415 429 445 694
EA 100 32 287 296 310 339 373 429 440 459 722
EA 120 32 296 309 324 353 390 449 458 478 738
8.115
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Deep drawer EA 30 39 192 212 230 243 265 315 320 352 456
EA 40 39 200 219 237 253 274 327 336 371 501
for carcase depth 560 mm EA 45 39 203 224 240 255 275 329 343 383 521
386 mm high EA 50 39 208 228 243 260 282 337 353 393 541
EA 60 39 214 237 253 271 289 346 381 401 585
120 cm width is not available in EA 80 39 272 285 300 328 354 404 428 454 714
ALNOBRIT and ALNOPOL! EA 90 39 281 292 311 338 366 422 440 458 756
EA 100 39 289 300 317 347 377 443 452 475 800
EA 120 39 300 314 336 362 397 462 474 500 821
Deep drawer EA 30 39 7 205 224 242 256 277 327 334 365 469
EA 40 39 7 212 233 249 265 288 341 348 384 513
same as above, but EA 45 39 7 215 238 253 267 289 343 355 396 533
for carcase depth 710 mm
EA 50 39 7 220 241 256 272 294 349 366 405 553
EA 60 39 7 227 249 265 285 301 359 395 414 598
EA 80 39 7 287 298 314 343 368 418 443 468 727
EA 90 39 7 294 306 324 351 379 436 453 472 769
EA 100 39 7 302 314 330 361 392 456 466 489 812
Deep drawer EA 30 39 4 192 212 230 243 265 315 320 352 456
EA 40 39 4 200 219 237 253 274 327 336 371 501
same as above, but EA 45 39 4 203 224 240 255 275 329 343 383 521
for carcase depth 410 mm
EA 50 39 4 208 228 243 260 282 337 353 393 541
EA 60 39 4 214 237 253 271 289 346 381 401 585
EA 80 39 4 272 285 300 328 354 404 428 454 714
EA 90 39 4 281 292 311 338 366 422 440 458 756
EA 100 39 4 289 300 317 347 377 443 452 475 800
Deep drawer for sink base unit EASP 60 39 4 214 237 253 271 289 346 381 401 585
EASP 80 39 4 272 285 300 328 354 404 428 454 714
With low back panel EASP 90 39 4 281 292 311 338 366 422 440 458 756
350 mm deep
for carcase depth 560 mm EASP 100 39 4 289 300 317 347 377 443 452 475 800
386 mm high
Deep drawer for bottle unit EA 15 72 A 565 592 624 648 673 726 742 776 830
for carcase depth 560 mm
711 mm high
Baking tin pull-out EAB 15 72 A 565 592 624 648 673 726 742 776 830
for carcase depth 560 mm
711 mm high
Deep drawer for bottle unit EA 15 78 A 566 604 635 660 684 745 755 789 842
for carcase depth 560 mm
776 mm high
Baking tin pull-out EAB 15 78 A 566 604 635 660 684 745 755 789 842
for carcase depth 560 mm
776 mm high
8.116
Lighting
9. Accessories
Planning examples
For drawers under induction hobs and units with low frame available.
Item
width mm
universal
hinge
Cutlery insert natural oak from 450 mm unit width 300 ZB 301 EN 126
for ELITE, PREMIUM and ALPHA
472 mm deep, 43 mm high
for 560 mm deep units
real wood natural oak
We recommend mats.
We recommend mats.
We recommend mats.
We recommend mats.
We recommend mats.
We recommend mats.
Not possible with internal drawers.
9.01
Item
width mm
universal
hinge
Tray set natural oak from 450 mm unit width 300 ZB 302 EN 216
for ELITE, PREMIUM and ALPHA
117 mm deep, 43 mm high
for 560 mm deep units
real wood natural oak
Set consisting of: 4 trays and clips with ALNO logo
Cutlery insert natural oak 300 mm unit width 182 ZBS 30 EN 105
for PREMIUM and ALPHA
472 mm deep, 43 mm high
for 560 mm deep units
real wood natural oak
Set consisting of:
Felt liner anthracite and multifunction insert 150 mm wide
Small cutlery insert, knife block, spice rack and roll holder can be
used. Order separately.
Cutlery insert natural oak 400 mm unit width 282 ZBS 40 EN 111
for PREMIUM and ALPHA
472 mm deep, 43 mm high
for 560 mm deep units
real wood natural oak
Set consisting of:
Felt liner anthracite and multifunction insert 150 mm wide
Small cutlery insert, knife block, spice rack and roll holder can be
used. Order separately.
Cutlery insert natural oak 450 mm unit width 332 ZBS 45 EN 153
for PREMIUM and ALPHA
472 mm deep, 43 mm high
for 560 mm deep units
real wood natural oak
Set consisting of:
Felt liner anthracite and cutlery insert 300 mm wide
9.02
Item
width mm
universal
hinge
Cutlery insert natural oak 500 mm unit width 382 ZBS 50 EN 154
for PREMIUM and ALPHA
472 mm deep, 43 mm high
for 560 mm deep units
real wood natural oak
Set consisting of:
Felt liner anthracite and cutlery insert 300 mm wide
Cutlery insert natural oak 600 mm unit width 482 ZBS 60 EN 161
for PREMIUM and ALPHA
472 mm deep, 43 mm high
for 560 mm deep units
real wood natural oak
Set consisting of:
Felt liner anthracite and cutlery insert 300 mm wide
Cutlery insert natural oak 800 mm unit width 682 ZBS 80 EN 235
for PREMIUM and ALPHA
472 mm deep, 43 mm high
for 560 mm deep units
real wood natural oak
Set consisting of:
Felt liner anthracite, cutlery insert 300 mm wide and multifunction
insert 150 mm wide
Small cutlery insert, knife block, spice rack and roll holder can be
used. Order separately.
Cutlery insert natural oak 900 mm unit width 782 ZBS 90 EN 369
for PREMIUM and ALPHA
472 mm deep, 43 mm high
for 560 mm deep units
real wood natural oak
Set consisting of:
Felt liner anthracite, cutlery insert 300 mm wide and set of trays
300 mm wide, incl. ALNO logo
Cutlery racks can be installed. Order separately.
Cutlery insert natural oak 1000 mm unit width 882 ZBS 100 EN 435
for PREMIUM and ALPHA
472 mm deep, 43 mm high
for 560 mm deep units
real wood natural oak
Set consisting of:
Felt liner anthracite, cutlery insert 300 mm wide, set of trays 300 mm
wide, incl. ALNO logo and multifunction insert 150 mm wide
Small cutlery insert, knife block, spice rack, roll holder and cutlery
racks can be used. Order separately.
9.03
Item
width mm
universal
hinge
Cutlery insert natural oak 1200 mm unit width 1082 ZBS 120 EN 447
for PREMIUM and ALPHA
472 mm deep, 43 mm high
for 560 mm deep units
real wood natural oak
Set consisting of:
Felt liner anthracite, cutlery insert 300 mm wide, set of trays 300 mm
wide, incl. ALNO logo and multifunction insert 150 mm wide
Small cutlery insert, knife block, spice rack, roll holder and cutlery
racks can be used. Order separately.
Deep drawer liner, natural oak over 45 cm deep drawer 300 ZBA 301 EN 137
width
for ELITE, PREMIUM and ALPHA
236 mm deep, 110 mm high
for 560 mm deep units
real wood natural oak, with embossed ALNO logo
In units over 45 cm wide, 2 inserts can be fitted one behind the other.
In units over 80 cm wide, 2 inserts can be fitted side by side making
4 in total. In 120 cm width, 3 inserts making 6 altogether.
We recommend mats.
Deep drawer liner, natural oak over 45 cm deep drawer 300 ZBA 302 EN 159
width
for ELITE, PREMIUM and ALPHA
472 mm deep, 110 mm high
for 560 mm deep units
real wood natural oak, with embossed ALNO logo
In units over 80 cm wide, 2 inserts can be fitted, 3 in 120 cm wide
units.
We recommend mats.
Cutlery insert, smoked oak 600 mm unit width 482 ZBI 60 RE 188
800 mm unit width 682 ZBI 80 RE 244
for PREMIUM and ALPHA 900 mm unit width 782 ZBI 90 RE 279
for drawers under induction hobs and units with low frame
472 mm deep, 49 mm high, for 560 mm deep units 1000 mm unit width 882 ZBI 100 RE 304
in real smoked oak 1200 mm unit width 1082 ZBI 120 RE 360
Item
width mm
universal
hinge
Cutlery insert, smoked oak 450 mm unit width 370 ZB 45 RE 140
for PREMIUM and ALPHA
472 mm deep, 59 mm high, for 560 mm deep units
in real smoked oak
Cutlery racks and roll holder, knife block and spice insert can be used.
Cutlery racks and roll holder, knife block and spice insert can be used.
Cutlery racks and roll holder, knife block and spice insert can be used.
Cutlery racks and roll holder, knife block and spice insert can be used.
Cutlery insert, smoked oak 1000 mm unit width 920 ZB 100 RE 266
for PREMIUM and ALPHA
472 mm deep, 59 mm high, for 560 mm deep units
in real smoked oak
Cutlery racks and roll holder, knife block and spice insert can be used.
Cutlery insert, smoked oak 1200 mm unit width 1120 ZB 120 RE 312
for PREMIUM and ALPHA
472 mm deep, 59 mm high, for 560 mm deep units
in real smoked oak
Cutlery racks and roll holder, knife block and spice insert can be used.
Item
width mm
universal
hinge
Compensation insert, smoked oak 300 mm unit width 220 ZBA 30 RE 68
400 mm unit width 320 ZBA 40 RE 72
for PREMIUM and ALPHA 450 mm unit width 370 ZBA 45 RE 75
100 mm deep, 59 mm high,
for 710 mm deep units 500 mm unit width 420 ZBA 50 RE 79
in real smoked oak 600 mm unit width 520 ZBA 60 RE 84
800 mm unit width 720 ZBA 80 RE 94
900 mm unit width 820 ZBA 90 RE 99
1000 mm unit width 920 ZBA 100 RE 103
Knife block smoked oak from 400 mm unit width 230 ZBZ 232 RE 140
for PREMIUM and ALPHA
176 mm deep, 26 mm high, Block in solid smoked oak with
anthracite-coloured felt
for 6 knives
As addition for smoked oak cutlery inserts.
Cutlery holder, smoked oak from 400 mm unit width 318 ZBZ 322 RE 89
for PREMIUM and ALPHA
90 mm deep, 26 mm high, Holder in solid smoked oak with anthracite-
coloured felt
for 6 sets of cutlery
As addition for smoked oak cutlery inserts.
Spice insert, smoked oak from 400 mm unit width 120 ZBZ 12 RE 139
for PREMIUM and ALPHA
177 mm deep, 20 mm high, for 2 spices or spice mills ZBZ 2 E, in real
smoked oak
As addition for smoked oak cutlery inserts.
Roll holder Stainless steel from 500 mm unit width 323 ZBZ 31 E 87
for PREMIUM and ALPHA
91 mm deep, 45 mm high
for aluminium foil or cling film
To supplement cutlery inserts in ash heartwood and smoked oak.
Smoked oak adjustable divider board. 600 mm unit width 508 ZBL 60 RE 107
800 mm unit width 708 ZBL 80 RE 134
for PREMIUM and ALPHA 900 mm unit width 808 ZBL 90 RE 147
for deep drawers, 472 mm deep
for 560 mm deep units 1000 mm unit width 908 ZBL 100 RE 159
MDF base, 9 mm thick, veneered smoked oak 1200 mm unit width 1108 ZBL 120 RE 186
Please submit separate order for push-fit dowels, partitions and
dividers
Smoked oak adjustable divider board. 600 mm unit width 508 ZBL 60 7 RE 121
800 mm unit width 708 ZBL 80 7 RE 154
same as above, but 900 mm unit width 808 ZBL 90 7 RE 168
572 mm deep
for 710 mm deep units 1000 mm unit width 908 ZBL 100 7 RE 186
Item
width mm
universal
hinge
Push-fit dowels, smoked oak 4-piece set 20 ZBZ 4 RE 80
for PREMIUM and ALPHA
for deep drawers, Ø 20 mm, 140 mm long
For individual placement the smoked oak heartwood divider board.
in real smoked oak
Lid holder from 450 mm unit width 330 ZBZ 332 RE 109
for PREMIUM and ALPHA
for deep drawers, 120 mm high,
Partition in smoked oak with anthracite-coloured felt
For individual placement the smoked oak heartwood divider board.
from 800 mm unit width 2 holders possible
Top shelf in smoked oak from 300 mm unit width 180 ZBZ 18 RE 260
for PREMIUM and ALPHA
for deep drawers, 472 mm deep, 19 mm thick
For individual placement the smoked oak heartwood divider board.
baseplate in black MDF, smoked oak veneer
incl. 4 storage jars in stainless steel with acrylic lids
110 mm high, Ø 100 mm
Item
width mm
universal
hinge
Ash heartwood cutlery insert 450 mm unit width 370 ZB 45 KE 63
for PREMIUM and ALPHA
472 mm deep, 59 mm high, for 560 mm deep units
Real ash heartwood, Partitions in ash
Knife block, roll and spice holders can be used. Conventional plastic
spice jars must be laid flat.
Knife block, roll and spice holders can be used. Conventional plastic
spice jars must be laid flat.
Knife block, roll and spice holders can be used. Conventional plastic
spice jars must be laid flat.
Knife block, roll and spice holders can be used. Conventional plastic
spice jars must be laid flat.
Ash heartwood cutlery insert 1000 mm unit width 920 ZB 100 KE 114
for PREMIUM and ALPHA
472 mm deep, 59 mm high, for 560 mm deep units
Real ash heartwood, Partitions in ash
Knife block, roll and spice holders can be used. Conventional plastic
spice jars must be laid flat.
Ash heartwood cutlery insert 1200 mm unit width 1120 ZB 120 KE 133
for PREMIUM and ALPHA
472 mm deep, 59 mm high, for 560 mm deep units
Real ash heartwood, Partitions in ash
Knife block, roll and spice holders can be used. Conventional plastic
spice jars must be laid flat.
Item
width mm
universal
hinge
Compensating insert in ash heartwood 300 mm unit width 220 ZBA 30 KE 45
400 mm unit width 320 ZBA 40 KE 46
for PREMIUM and ALPHA 450 mm unit width 370 ZBA 45 KE 47
100 mm deep, 59 mm high, for 710 mm deep units
Real ash heartwood 500 mm unit width 420 ZBA 50 KE 48
Partition in ash 600 mm unit width 520 ZBA 60 KE 50
800 mm unit width 720 ZBA 80 KE 54
900 mm unit width 820 ZBA 90 KE 58
1000 mm unit width 920 ZBA 100 KE 59
Knife block in ash heartwood from 500 mm unit width 406 ZBZ 41 KE 71
for PREMIUM and ALPHA
176 mm deep, 26 mm high, Block of solid ash heartwood
for 5 knives
To supplement the ash heartwood cutlery inserts.
Roll holder Stainless steel from 500 mm unit width 323 ZBZ 31 E 87
for PREMIUM and ALPHA
91 mm deep, 45 mm high
for aluminium foil or cling film
To supplement cutlery inserts in ash heartwood and smoked oak.
Adjustable divider board ash heartwood 600 mm unit width 508 ZBL 60 KE 78
800 mm unit width 708 ZBL 80 KE 91
for PREMIUM and ALPHA 900 mm unit width 808 ZBL 90 KE 100
for deep drawers 472 mm deep, for 560 mm deep units
MDF board 9 mm thick, ash heartwood veneer 1000 mm unit width 908 ZBL 100 KE 108
Order push-fit dowels and partitions separately. 1200 mm unit width 1108 ZBL 120 KE 121
Adjustable divider board ash heartwood 600 mm unit width 508 ZBL 607 KE 87
800 mm unit width 708 ZBL 807 KE 107
same as above, but 900 mm unit width 808 ZBL 907 KE 122
572 mm deep
for 710 mm deep units 1000 mm unit width 908 ZBL 1007 KE 128
Item
width mm
universal
hinge
Cutlery insert Anthracite from 300 mm unit width 100 ZB 1 AG 52
for ELITE, PREMIUM and ALPHA
474 mm deep, 50 mm high, for 560 mm deep units
Anthracite grey laminate
We recommend mats.
Can be combined with ZB3AG and inserts in natural oak.
We recommend mats.
Can be combined with ZB1AG and inserts in natural oak.
Cutlery insert anthracite grey 600 mm unit width 526 ZBS 601 AG 151
for ELITE
474 mm deep, 50 mm high, for 560 mm deep units
Set consisting of:
Anthracite grey mat
Cutlery insert ZB1AG and ZB3AG
Cutlery insert anthracite grey / natural oak 600 mm unit width 526 ZBS 602 AG 263
for ELITE
474 mm deep, 50 mm high, for 560 mm deep units
Set consisting of:
Anthracite grey mat
Cutlery insert ZB3AG, Multifunction insert in natural oak,
Knife block natural oak
Cutlery insert anthracite grey 900 mm unit width 826 ZBS 901 AG 155
for ELITE
474 mm deep, 50 mm high, for 560 mm deep units
Set consisting of:
Anthracite grey mat
Cutlery insert ZB1AG and ZB3AG
Cutlery insert anthracite grey / natural oak 900 mm unit width 826 ZBS 902 AG 314
for ELITE
474 mm deep, 50 mm high, for 560 mm deep units
Set consisting of:
Anthracite grey mat
Cutlery insert 3 x ZB1AG, 3 x Multifunction insert in natural oak, Knife
block natural oak, Roll holder natural oak, Spice rack natural oak
9.10
Item
width mm
universal
hinge
Cutlery insert Anthracite 300 mm unit width 221 ZB 30 AG 21
400 mm unit width 321 ZB 40 AG 23
for PREMIUM and ALPHA 450 mm unit width 371 ZB 45 AG 24
474 mm deep
for 560 mm deep units 500 mm unit width 421 ZB 50 AG 26
600 mm unit width 521 ZB 60 AG 28
800 mm unit width 721 ZB 80 AG 39
900 mm unit width 821 ZB 90 AG 40
1000 mm unit width 921 ZB 100 AG 43
1200 mm unit width 921 ZB 120 AG 49
Cutlery insert Anthracite 500 mm unit width 421 ZB 5041 AG 36
600 mm unit width 521 ZB 6041 AG 38
same as above, but 900 mm unit width 821 ZB 9041 AG 47
324 mm deep
for 410 mm deep units
Cutlery insert Anthracite from 450 mm unit width 330 ZBI 456 AG 34
for ELITE, PREMIUM and ALPHA
for drawers under induction hobs and units with low frame
474 mm deep, 35 mm high
9.11
Item
width mm
universal
hinge
Deep-drawer cross divider Anthracite 30 cm deep drawer width 260 ZBO 306 AG 42
40 cm deep drawer width 360 ZBO 406 AG 46
for ELITE 45 cm deep drawer width 410 ZBO 456 AG 46
versatile partitioning system for 560 mm and 710 mm deep units
Anthracite grey powder-coated metal dividers with plastic connectors 50 cm deep drawer width 460 ZBO 506 AG 46
and end caps 60 cm deep drawer width 560 ZBO 606 AG 57
Set of 2 cross dividers and 3 dividing bars, 6 dividing bars for widths 80 cm deep drawer width 760 ZBO 806 AG 62
of 800 mm or more 90 cm deep drawer width 860 ZBO 906 AG 62
We recommend mats. 100 cm deep drawer width 960 ZBO 1006 AG 62
120 cm deep drawer width 1160 ZBO 1206 AG 62
9.12
Item
width mm
universal
hinge
Mat Anthracite 300 mm unit width 226 ZIM 306 AG 17
400 mm unit width 326 ZIM 406 AG 18
for ELITE 450 mm unit width 376 ZIM 456 AG 19
for deep drawers and drawers 473 mm deep
with textile structure anti-slip surface 500 mm unit width 426 ZIM 506 AG 20
for 560 mm deep units 600 mm unit width 526 ZIM 606 AG 22
800 mm unit width 726 ZIM 806 AG 26
900 mm unit width 826 ZIM 906 AG 27
1000 mm unit width 926 ZIM 1006 AG 29
1200 mm unit width 1126 ZIM 1206 AG 32
Mat Anthracite 300 mm unit width 226 ZIM 3067 AG 18
400 mm unit width 326 ZIM 4067 AG 19
same as above, but 450 mm unit width 376 ZIM 4567 AG 20
623 mm deep
for 710 mm deep units 500 mm unit width 426 ZIM 5067 AG 21
600 mm unit width 526 ZIM 6067 AG 23
800 mm unit width 726 ZIM 8067 AG 28
900 mm unit width 826 ZIM 9067 AG 30
1000 mm unit width 926 ZIM 1067 AG 32
Mat Anthracite 300 mm unit width 226 ZIM 3064 AG 17
450 mm unit width 376 ZIM 4564 AG 18
same as above, but 500 mm unit width 426 ZIM 5064 AG 20
459 mm deep
for interior deep drawer 600 mm unit width 526 ZIM 6064 AG 21
9.13
Item
width mm
universal
hinge
Drip tray 450 mm unit width 417 EZIT 45 A 32
500 mm unit width 467 EZIT 50 A 32
aluminium tray, textured, 518 mm deep, factory-fitted in sink unit. 600 mm unit width 567 EZIT 60 A 33
back and side edges raised, front edge lowered, to cover front carcase
edge. if required, cut out front corner for waste bin bearing. 800 mm unit width 767 EZIT 80 A 38
900 mm unit width 867 EZIT 90 A 39
Cannot be used in pull out units from 800 mm width. 1000 mm unit width 967 EZIT 100 A 41
1200 mm unit width 1167 EZIT 120 A 42
Deep drawer liner, anthracite grey 3 items in set 236 ZBS 3 AG 198
for ELITE, PREMIUM and ALPHA
Anthracite-grey with translucent facets
Consisting of:
129 mm high
over 30 cm deep drawer width for 560 mm and 710 mm deep units
Can be fitted in deep drawers over 390 mm high. Not possible for
STARLINE.
9.14
Item
width mm
universal
hinge
Internal drawer anthracite grey 300 mm unit width 256 ZIS 306 AG 125
400 mm unit width 356 ZIS 406 AG 129
for ELITE 450 mm unit width 406 ZIS 456 AG 131
99 mm high
for 560 mm deep base units 500 mm unit width 456 ZIS 506 AG 134
incl. carcase rails 600 mm unit width 556 ZIS 606 AG 138
800 mm unit width 756 ZIS 806 AG 149
900 mm unit width 856 ZIS 906 AG 154
1000 mm unit width 956 ZIS 1006 AG 158
1200 mm unit width 1156 ZIS 1206 AG 161
Internal drawer anthracite grey 300 mm unit width 256 ZIS 305 AG 81
400 mm unit width 356 ZIS 405 AG 81
for PREMIUM and ALPHA 450 mm unit width 406 ZIS 455 AG 81
99 mm high
incl. carcase rails 500 mm unit width 456 ZIS 505 AG 83
600 mm unit width 556 ZIS 605 AG 87
800 mm unit width 756 ZIS 805 AG 96
900 mm unit width 856 ZIS 905 AG 98
1000 mm unit width 956 ZIS 1005 AG 103
1200 mm unit width 1156 ZIS 1205 AG 116
Internal drawer anthracite grey 300 mm unit width 234 ZIS 3015 AG 82
450 mm unit width 384 ZIS 4515 AG 84
for PREMIUM and ALPHA 500 mm unit width 434 ZIS 5015 AG 86
99 mm high
incl. distance strip and carcase rails 600 mm unit width 534 ZIS 6015 AG 88
for retroactive installation in units with hinged door
Interior deep drawer Anthracite 300 mm unit width 256 ZIA 306 AG 145
450 mm unit width 406 ZIA 456 AG 149
for ELITE 500 mm unit width 456 ZIA 506 AG 153
187 mm high
for 560 mm deep units 600 mm unit width 556 ZIA 606 AG 158
incl. carcase rails
Interior deep drawer Anthracite 300 mm unit width 256 ZIA 303 AG 111
450 mm unit width 406 ZIA 453 AG 112
for PREMIUM 500 mm unit width 456 ZIA 503 AG 113
187 mm high
incl. distance strip and carcase rails 600 mm unit width 556 ZIA 603 AG 115
for retroactive installation in units with hinged door
Interior deep drawer Anthracite 300 mm unit width 234 ZIA 305 AG 106
450 mm unit width 406 ZIA 455 AG 107
for deep drawer Alpha 500 mm unit width 434 ZIA 505 AG 108
187 mm high
incl. distance strip and carcase rails 600 mm unit width 534 ZIA 605 AG 110
for retroactive installation in units with hinged door
9.15
Item
width mm
universal
hinge
Driver for internal drawer for ELITE 70 ZIZ 6 AG 28
on site
for mounting on internal drawers behind deep drawers for ELITE 70 EZIZ 6 AG 30
Hole with 25 mm dia. to be drilled on interior of front by customer. factory-fitted
Catch can be unlocked and deactivated by hand.
Set comprising handle and catch
Anthracite grey for PREMIUM and ALPHA 70 ZIZ 1 AG 29
on site
Cannot be fitted on ALNOART, fronts with strip handle 275 w, on deep for PREMIUM and ALPHA 70 EZIZ 1 AG 31
drawers with Tip-On or on internal drawers with low side profile.
factory-fitted
Arena shelf for pull-out larder unit for 300 mm unit width 250 ZI 30 AG 140
Anthracite grey
Used for base and tall units with larder pull-out
Orgaset 1 for pull-out larder unit for 300 mm unit width 115 ZI 3011 AG 296
Anthracite grey
Used for base and tall units with larder pull-out
Set consists of 2 inserts.
Top insert comprising:
2 boxes (1.0 l), 1 box (2.1 l), 2 boxes (2.0 l),
1 divider for knives, 2 lids, 2 support rails
bottom insert comprises:
1 box (3.2 l), 1 tray (1.1 L) with bottle
railing, 3 small dividers, 3 large dividers, 2 holders
Orgaset 2 for pull-out larder unit for 300 mm unit width 115 ZI 3012 AG 135
Anthracite grey
Used for base and tall units with larder pull-out
Set consisting of:
2 boxes (1.0 l), 2 boxes (2.1 l), 2 lids, 1 large divider, 2 stpport rails
9.16
Item
width mm
universal
hinge
Magnetic safety lock (child safety) Safety lock ZI 1 28
for magnetic release
Can be fitted at a later stage to hinged doors, flap doors, top deep
drawers and top drawers (fitted below straight underneath worktop).
Can only be used without cutlery trays in drawers fitted at top-most
position. Magnetic button to open ZI 11 34
Choice between active and inactive available. the lock
It is a strong magnet and needs to be kept away from credit cards, etc.
9.17
Item
width mm
universal
hinge
Limiter for energy accumulator for flap-door units ZI 18 15
Limits opening angle to 100°
The minimum distance to the ceiling is reduced for all flap doors with
3 level height from 130 mm to 90 mm.
For all flap doors with 4 level height from 160 mm to 120 mm.
in packs of 2
For all flap doors with 3 and 4 level height and door width > 796 mm.
For all flap doors with 3 and 4 level height and door width > 796 mm.
For all flap doors at 2, 3 height levels and for flap doors at 4 height
levels, up to and including 60 cm width.
9.18
Item
width mm
universal
hinge
Servo drive set for waste deep drawer ZAZ 7 254
for UK ZAZ 7 UK 255
Lighly tap the door or gently pull the handle and the front pull-out
opens automatically with electric power. For on-site installation cen-
tred on the base panel for a bottom deep drawer.
Set includes:
1 x part receiving bracket (incl. screws),
1 drive unit, 1 mains adapter, 1 mains cable
ZAZ 7 UK = England, Hong Kong, Ireland, Singapore
Handle 82 ZG 1 16
to make it easier to close Softlilt and upward folding door units
14,5 mm deep
for on-site installation to the inside of the front
Ritter electric built-in slicing machine food sliced from left 342 AA 451 683
AES 62 SR food sliced from right 342 AA 452 683
for fitting into drawer from 450 mm wide
Metal
Serrated knife with polished slicer blade, Ø 170 mm
slicing thickness adjustable from 0 - 14 mm
safety switch
Automatic folding lock when slice thickness is set
Catch tray for sliced food made of rust-free, polished stainless steel
Bracket for finger protector and food grip
Setting brace locks automatically
Technical data:
230 Volt, 65 Watt, KB (short-term operation) 5 min
75 mm x 342 mm x 365 mm (folded)
9.19
Item
width mm
universal
hinge
Ritter electric built-in slicing machine food sliced from right 342 AA 454 839
AES 72 SR
for fitting into drawer from 450 mm wide
All-metal
Electrolytically polished serrated slicer blade, Ø 170 mm
slicing thickness adjustable from 0 - 14 mm
Child guard with 2-finger switching system
Simultaneous or continuous operation
Automatic folding lock when slice thickness is set
Catch tray for sliced food made of rust-free, polished stainless steel
Bracket for finger protector and food grip
Setting brace locks automatically
Technical data:
230 Volt, 65 Watt, KB (short-term operation) 5 min
75 mm x 342 mm x 365 mm (folded)
Ritter electric built-in slicing machine food sliced from right 195 AA 455 788
AES 52 SR
for fitting into drawer from 300 mm wide
Metal
Serrated knife with polished slicer blade, Ø 170 mm
slicing thickness adjustable from 0 - 14 mm
safety switch
Automatic folding lock when slice thickness is set
Catch tray for sliced food
Setting brace locks automatically
Technical data:
230 Volt, 65 Watt, KB (short-term operation) 5 min
79 mm x 195 mm x 385 mm (folded, without tray)
9.20
Lighting
Item
width mm
universal
hinge
LED built-in light linear 3.8 watts 267 ZLL 30 A 100
5.3 watts 367 ZLL 40 A 100
Aluminium profile with integrated LED light 6 watts 417 ZLL 45 A 103
1800 mm connection cable with plug connection
Energy efficiency class A+ 6.8 watts 467 ZLL 50 A 107
7.5 watts 517 ZLL 55 A 110
We recommend light control starter set. It must be ordered 8.3 watts 567 ZLL 60 A 113
separately. 11.3 watts 767 ZLL 80 A 132
Additionally order ZLZ 53 IC for wattages higher than 30 watts.
12.8 watts 867 ZLL 90 A 141
Additionally order ZLZ 72 for control by App. 14.3 watts 967 ZLL 100 A 150
17.3 watts 1167 ZLL 120 A 160
Alternatively, transformers and switches can be used. Connecting accessories:
Neutral white approx.
Order light slot separately: MPKBU L / MPKBO L. Light control starter set ZLZ 52 IC 240
4,000 K Light control follow-on set ZLZ 53 IC 169
App control ZLZ 72 192
LED transformer 50 W ZLZ 54 84
LED transformer 30 W ZLZ 55 72
LED transformer 15 W ZLZ 59 53
Standard switch ZLZ 8 29
LED touch dimmer ZLZ 26 94
Light sensor switch ZLZ 25 85
Wireless switch ZLZ 49 102
Extension cable ZLZ 181 22
linear LED recessed light with colour control 3.5 watts 267 ZLL 30 IC 107
4.9 watts 367 ZLL 40 IC 110
stainless steel-effect 5.6 watts 417 ZLL 45 IC 115
Aluminium profile with integrated LED light
Colour temperature infinitely variable from warm white to 6.3 watts 467 ZLL 50 IC 119
cold white. 7 watts 517 ZLL 55 IC 124
1800 mm connection cable with plug connection 7.7 watts 567 ZLL 60 IC 130
Energy efficiency class A+ 10.5 watts 767 ZLL 80 IC 153
We recommend light control starter set. It must be ordered 11.9 watts 867 ZLL 90 IC 164
separately. 13.3 watts 967 ZLL 100 IC 176
Additionally order ZLZ 53 IC for wattages higher than 30 watts. 16.1 Watts 1167 ZLL 120 IC 193
LED recessed light with colour control 2.6 watts 180 ZLV 180 IN 66
3.5 watts 265 ZLV 265 IN 74
Laminate enclosure matt black 6 watts 415 ZLV 415 IN 94
Specified width includes 2 x 15 mm end lids
10.3 watts 630 ZLV 630 IN 126
We recommend light control starter set. It must be ordered 18.4 watts 1150 ZLV 1150 IN 193
separately. Connecting accessories:
Additionally order ZLZ 61 IN for wattages higher than 60 watts.
Light control starter set ZLZ 60 IN 150
Order light slot separately: MPKBV L. Light control follow-on set ZLZ 61 IN 80
Extension cable ZLZ 181 22
9.21
Item
width mm
universal
hinge
LED built-in light 3.7 watts, 390 lm 267 ZLN 302 A 93
5.1 watts, 540 lm 367 ZLN 402 A 94
Aluminium profile with integrated LED-Stripe 5.75 watts, 615 lm 417 ZLN 452 A 96
for installing in gap between
wall-unit shelf and installation wall. 6.5 watts, 690 lm 467 ZLN 502 A 99
1800 mm connection cable with plug connection 7.20 watts, 540 lm 517 ZLN 552 A 102
Energy efficiency class A+ 7.9 watts, 839 lm 567 ZLN 602 A 104
10.7 watts, 1123 lm 767 ZLN 802 A 122
We recommend light control starter set. It must be ordered
separately. 12.1 watts, 1337 lm 867 ZLN 902 A 130
Additionally order ZLZ 53 IC for wattages higher than 30 watts. 13.45 watts, 1439 lm 967 ZLN 1002 A 138
LED built-in light linear, short with colour control set of 3 ZLS 501 IC 575
per piece ZLI 501 IC 125
White glass cover
LED - 2.8 W / 12 V DC Connecting accessories:
250 x 50 x 6 mm Light control starter set ZLZ 52 IC 240
Colour temperature infinitely variable from warm white to Light control follow-on set ZLZ 53 IC 169
cold white. App control ZLZ 72 192
1800 mm connection cable with plug connection
Energy efficiency class A+
Set consisting of:
3 LED lights
Light control starter set
- 30-watt transformer with 6-way distributor
colour control approx.
- Control module
2,700 - 5,700 K - 4-channel radio remote control
9.22
Item
width mm
universal
hinge
LED built-in light 66 ZL 55 E 39
stainless steel-effect Connecting accessories:
LED - 4 W / 12 V DC 250 lm Light control starter set ZLZ 52 IC 240
Installation dimension: Ø 55 mm, 12 mm installed depth Light control follow-on set ZLZ 53 IC 169
1800 mm connecting lead with plugs App control ZLZ 72 192
Energy efficiency class A+
LED transformer 50 W ZLZ 54 84
We recommend light control starter set. It must be ordered LED transformer 30 W ZLZ 55 72
separately. LED transformer 15 W ZLZ 59 53
Additionally order ZLZ 53 IC for wattages higher than 30 watts. Standard switch ZLZ 8 29
Additionally order ZLZ 72 for control by App. LED touch dimmer ZLZ 26 94
Light sensor switch ZLZ 25 85
Neutral white approx.
Alternatively, transformers and switches can be used. Wireless switch ZLZ 49 102
4,000 K Extension cable ZLZ 181 22
Order light slot separately: MPKBU L / MPKBO L.
LED built-in light with colour control Set of 3 70 ZLS 553 T 322
to supplement the set 70 ZLU 553 T 66
titanium-effect
LED - 2x2 W / 12 V DC
with wireless dimmer for infinitely variable adjustment between
warm and cool white
Installation dimension: Ø 55 mm, 10 mm installed depth
2000 mm connection cable with plugs
Energy efficiency class A+
Set consisting of:
3 LED lights
Electronic transformer 30 W
1 wireless dimmer with on and off function
colour control approx.
mains cable 1500 mm with Euro plug
3,200 - 5,500 K
Can be extended up to 6 lights
Order light slot separately: MPKBU L / MPKBO L.
9.23
Item
width mm
universal
hinge
LED panel light 100 ZLU 201 W 69
white Connecting accessories:
LED - 6 W / 12 V DC 200 x 100 x 5 mm LED transformer 50 W ZLZ 54 84
uniform distribution of the light, LED transformer 30 W ZLZ 55 72
without dazzling LED transformer 15 W ZLZ 59 53
2000 mm connecting lead with plugs Standard switch ZLZ 8 29
Energy efficiency class A
Wireless switch ZLZ 49 102
Extension cable ZLZ 181 22
LED built-under light set Slimline 3 watts, 201 lm 267 ZLU 301 A 63
3.36 watts, 252 lm 367 ZLU 401 A 69
Aluminium profile with integrated LED light 3.84 watts, 269 lm 417 ZLU 451 A 73
19 mm deep, 8 mm high
incl. 200 mm cable duct 4.32 watts, 324 lm 467 ZLU 501 A 77
Installed by gluing or screwing 5.28 watts, 369 lm 567 ZLU 601 A 83
1500 mm connecting lead with plugs 7.20 watts, 540 lm 767 ZLU 801 A 97
Energy efficiency class A 8.16 watts, 612 lm 867 ZLU 901 A 103
9.12 watts, 684 lm 967 ZLU 1001 A 112
11.04 watts, 828 lm 1167 ZLU 1201 A 130
Connecting accessories:
LED transformer 50 W ZLZ 54 84
LED transformer 30 W ZLZ 55 72
Neutral white approx.
4,000 K LED transformer 15 W ZLZ 59 53
Standard switch ZLZ 8 29
Touch sensor switch ZLZ 12 68
Wireless switch ZLZ 49 102
LED touch dimmer ZLZ 26 94
Extension cable ZLZ 181 22
LED built-under light set 90 ZL 79 E 99
Connecting accessories:
stainless steel-effect Distributor box ZLZ 91 31
High-power LED chip
230 V 50/60 Hz, 3 watts, Ø 100 mm. 240 lm Recessed switch set ZLZ 91 A 48
Ø 90 mm, Structural height 22 mm, Surface-mounted switch set ZLZ 21 E 51
with crystal-clear cover, Standard switch ZLZ 8 29
2000 mm connecting cable with plugs Wireless switch ZLZ 49 102
Energy efficiency class A++
Light sensor switch ZLZ 25 85
Plan distributor ZLZ 91 for the electrical connection. Extension cable ZLZ 78 34
no transformer necessary
warm-white approx.
3,200 K
9.24
Item
width mm
universal
hinge
LED built-under light set set of 3 ZLS 202 E 187
to supplement the set ZLU 202 E 50
Stainless steel
LED - 2.64 W / 12 V DC 272 lm Connecting accessories:
200 x 60 x 8 mm Extension cable ZLZ 181 22
1600 mm connecting lead with plugs
Energy efficiency class A++
Set consisting of:
1 light with master switch and 2 other lights
1 electronic transformer 20 W, with 6-way distributor
2000 mm connecting cable with Europlug
warm-white approx.
3,500 K
LED wall shelf 1.3 watts Load capacity up to 5 kg 600 ZL 604 E 174
2.9 watts Load capacity up to 7 kg 900 ZL 904 E 231
stainless steel-effect
illuminated glass shelf with switch, Connecting accessories:
Cable outlet on switch side, right LED transformer 50 W ZLZ 54 84
glass panel 8 mm thick LED transformer 30 W ZLZ 55 72
Distance between individual LED lamps 30 mm LED transformer 15 W ZLZ 59 53
incl. mounting hardware
1900 mm connecting cable with plugs Extension cable ZLZ 181 22
Energy efficiency class A+
9.25
Item
width mm
universal
hinge
Cabinet interior LED light 1.4 watts, 48 lm 268 ZLI 307 E 72
1.8 watts, 61 lm 368 ZLI 407 E 77
for drawers and deep drawers 2.3 watts, 78 lm 418 ZLI 457 E 80
stainless steel-effect
with sensor switch, Laminate enclosure: 2.3 watts, 78 lm 468 ZLI 507 E 80
matt colourless finish at bottom 2.8 watts, 95 lm 568 ZLI 607 E 86
9,5 mm high, 15 mm deep 3.8 watts, 129 lm 768 ZLI 807 E 95
2000 mm connecting cable with plugs 4.2 watts, 143 lm 868 ZLI 907 E 99
Energy efficiency class A+
4.7 watts, 160 lm 968 ZLI 1007 E 104
Lights cannot be installed for internal drawers and interior deep 5.7 watts, 194 lm 1168 ZLI 1207 E 115
drawers, drawer below heat deflector plates or base units for Connecting accessories:
built-in ovens.
LED transformer 50 W ZLZ 54 84
LED transformer 30 W ZLZ 55 72
Neutral white approx.
4,000 K LED transformer 15 W ZLZ 59 53
Extension cable ZLZ 181 22
LED light strip ZLN 5000 330
Complete set consists of:
5000 mm LED silicone strip, 4.8 W per metre, can be shortened
1950 lm 10 x rigid corner connectors 2 x clip connectors
2 x 50 mm connection cables with clip for LED silicone strip
2 x 2000 mm cables
1 electronic transformer 30 W
2000 mm connecting cable with Schuko-type earthed plug
Energy efficiency class A+
9.26
Item
width mm
universal
hinge
Light control starter set ZLZ 52 IC 240
30-watt transformer, with 6-way distributor
4-channel remote control with scene control
Control module
Controls
- on/off dimming, colour temperature 2700 K to 5400 K
- on/off dimming for standard LED lights
9.27
Item
width mm
universal
hinge
Switch with electric light sensor ZLZ 25 85
for primary switching applications up to 230 V,
130 x 55 x 25 mm
2000 mm sensor lead
2500 mm connection lead with Schuko-type earthed plug and
shockproof socket
Distributor ZLZ 91 31
6-way distributor
2000 mm connecting cable with Europlug
9.28
Item
width mm
universal
hinge
Flush-mounted switch set ZLZ 91 A 48
aluminium effect
with rocker switch
switch edge 1 mm high, 24 mm installation depth,
installation cutout diameter 78 mm, diameter 85 mm
6-way distributor
2000 mm connecting cable with Europlug
aluminium effect
with rocker switch
Ø 66 mm, 17 mm high
6-way distributor
2000 mm connecting cable with Europlug
Fitting into wall unit or worktops. Do not plan base units with
drawers, please pay attention to mounting depth!
9.29
Item
width mm
universal
hinge
Corner socket 80 ZLZ 47 E 117
Stainless steel
with four earthed sockets,
464 - 590 mm high (telescopic),
112 mm wide, 80 mm deep
2000 mm connection lead with loose Schuko-type earthed plug
9.30
Item
width mm
universal
hinge
Socket element 125 ZLZ 44 E 257
Stainless steel
260 mm high, 410 mm when pulled out
gently advances from the housing when lightly pushed
2 sockets 1 USB jack
Charging function via USB socket type A 5 V DC
Charging current: 2100 mA
2000 mm connection lead with loose Schuko-type earthed plug
9.31
Item
width mm
universal
hinge
Socket element EVOline Backflip stainless steel 105 ZLZ 45 E 226
black 105 ZLZ 45 S 263
pivotable socket unit
2 sockets 1 USB jack
Charging function via USB socket type A 5 V DC
Charging current: 1000 mA
2500 mm connecting cable with loose Schuko-type earthed
plug
length 225 mm, Installed depth: 53 mm
Cutout dimensions 215 x 88 mm
9.32
Sinks/taps/waste bins
Allow for sufficient free space between the sink and hob
- Recommendation: approx. 500 mm
Item
width mm
universal
hinge
Franke inset sink set 780 ZS 784 E 365
Inset sink, Stainless steel
435 mm deep
1 bowl 400 x 355 x 150 mm
Basin height incl. pop-up waste set
267 mm
plug valve 1 1/2 inch
cutout size 760 x 415 mm
corner radius 45 mm
minimum built-in width 418 mm
(450 mm sink base unit)
incl. set of accessories in light grey (chop-
ping board, drainer bowl, plate rack)
9.33
Item
width mm
universal
hinge
Franke inset sink set 860 ZS 5000 449
Inset sink, Stainless steel
500 mm deep
1 bowl 340 x 420 x 160 mm
Basin height incl. outlet fitting 235 mm
rippled draining board
strainer as 3 1/2‘‘ eccentric valve
2 drill holes
cutout size 840 x 480 mm
minimum built-in width 430 mm
(450 mm sink base unit)
9.34
Item
width mm
universal
hinge
Franke inset sink set 1000 ZS 5002 541
Inset sink, Stainless steel
500 mm deep
1 bowl 340 x 420 x 160 mm
Basin height incl. outlet fitting 235 mm
1 waste bowl 170 x 280 x 80 mm
with stainless steel insert
rippled draining board
strainer as 3 1/2‘‘ eccentric valve
2 drill holes
cutout size 980 x 480 mm
minimum built-in width 560 mm
(600 mm sink base unit)
9.35
Item
width mm
universal
hinge
Franke inset sink set 780 ZS 5007 431
Inset sink, Stainless steel
435 mm deep
1 bowl 360 x 355 x 140 mm
Basin height incl. pop-up waste set
270 mm
rippled draining board with overflow
Strainer as 1 1/2 inch eccentric valve
2 drill holes
cutout size 760 x 415 mm
minimum built-in width 418 mm
(450 mm sink base unit)
9.36
Item
width mm
universal
hinge
Franke inset sink set 770 ZS 5010 478
Inset sink, Stainless steel
500 mm deep
1 basin with inside diameter 410 mm,
155 mm deep
Basin height incl. outlet fitting 245 mm
rippled draining board with overflow
Strainer as 1 1/2 inch eccentric valve
2 drill holes
cutout according to template
minimum built-in width 410 mm
(450 mm sink base unit)
9.37
Item
width mm
universal
hinge
Franke inset sink set 510 ZS 5013 360
Inset sink, Stainless steel
510 mm deep
1 basin with inside diameter 410 mm,
175 mm deep
Basin height incl. outlet fitting 230 mm
Basket strainer as 3 1/2 inch plug valve
Cutout size dia. 490 mm
minimum built-in width 410 mm
(450 mm sink base unit)
9.38
Item
width mm
universal
hinge
Franke inset sink stainless steel 490 ZS 49 E 604
SlimTop with flat installation edge
450 mm deep
1 bowl 450 x 410 x 200 mm
Basin height incl. outlet fitting 260 mm
Basket strainer as 3 1/2 inch plug valve
with concealed overflow
Cutout dimensions 460 x 420 mm
corner radius 12 mm
minimum built-in width 460 mm
(500 mm sink base unit)
355
435
40
360 40
9.39
Item
width mm
universal
hinge
Franke inset sink stainless steel 780 ZS 780 E 211
475 mm deep
1 bowl 355 x 395 x 150 mm
Basin height incl. pop-up waste set
250 mm
rippled draining board with overflow
Basket strainer as 3 1/2 inch plug valve
cutout size 760 x 455 mm
minimum built-in width 390 mm
(450 mm sink base unit)
9.40
Item
width mm
universal
hinge
Franke inset sink stainless steel 510 ZS 53 E 274
475 mm deep
1 bowl 430 x 320 mm
Basin height incl. pop-up waste set
250 mm
strainer as 3 1/2‘‘ eccentric valve
cutout size 490 x 390 mm
minimum built-in width 450 mm
(500 mm sink base unit)
9.41
Item
width mm
universal
hinge
Franke inset sink stainless steel 1000 ZS 1050 E 537
500 mm deep
1 basin 340 x 400 x 190 mm
1 waste tray 160 x 310 x 120 mm
with stainless steel insert
Basin height incl. pop-up waste set
270 mm rippled draining board with
concealed overflow
strainer as 3 1/2‘‘ eccentric valve
cutout size 980 x 480 mm
minimum built-in width 540 mm
(600 mm sink base unit)
9.42
Item
width mm
universal
hinge
Franke inset shallow sink stainless steel 560 ZS 600 E 1543
SlimTop with flat installation edge
450 mm deep
1 basin 340 x 410 x 200 mm
1 waste tray 160 x 410 x 140 mm
Basin height incl. outlet fitting 280 mm
Basket strainer as 3 1/2 inch plug valve
Fast Fix fixing system
cutout size 530 x 420 mm
minimum built-in width 525 mm
(600 mm sink base unit)
9.43
Item
width mm
universal
hinge
Franke inset sink stainless steel 860 ZSS 1014 E 3636
basin on right
SlimTop with flat installation edge
510 mm deep stainless steel 860 ZSS 1015 E 3636
1 bowl 540 x 410 x 200 mm basin on left
1 bowl 270 x 480 x 200 mm
Basin height incl. pop-up waste set
270 mm
With 3 1/2 inch strainer basket eccentric
860 valve. in the large basin
pop-up button
220 285
R1
(85)
35
40
0
The mixer tap must be fitted before the
overflow.
without drilled hole
510
480
410
R1
2
R1
2 cutout size 840 x 490 mm
minimum built-in width 835 mm
270
20
540
(900 mm sink base unit)
+ accessories: a set of 3 knifes, knife
block, 2 chopping boards, drip tray,
draining rack
Franke inset round sink with draining stainless steel 770 ZS 77 E 216
board
500 mm deep
1 basin with inside diameter 410 mm,
155 mm deep
Basin height incl. outlet fitting 245 mm
rippled draining board
plug valve 1 1/2 inch
cutout according to template
minimum built-in width 410 mm
(450 mm sink base unit)
9.44
Item
width mm
universal
hinge
Inset round sink bowl set stainless steel 933 ZS 454 E 177
453 mm deep
round bowl,
Inside diameter 385 x 150 mm high
Basin height incl. outlet fitting 255 mm
drainer bowl,
Inside diameter 385 x 30 mm high
plug valve 1 1/2 inch
cutout size diameter 434 mm
(600 mm sink base unit)
45°
212,5
80
500
425
0
R1
400
9.45
Item
width mm
universal
hinge
Franke inset round sink graphite 510 ZSF 510 SF 500
Fragranit+/Sanitized
510 mm deep
1 bowl with integral tap ledge stone grey 510 ZSF 510 GG 500
Inside diameter 400 mm, 195 mm high
Basin height incl. outlet fitting 265 mm
strainer as 3 1/2‘‘ eccentric valve
2 drill holes as pre-punching for knocking Glacier 510 ZSF 510 GL 500
out
cutout size Ø 493 mm
(450 mm sink base unit)
9.46
Item
width mm
universal
hinge
Franke inset sink graphite 860 ZSF 861 SF 462
Fragranit+/Sanitized
435 mm deep
1 bowl 330 x 360 x 165 mm stone grey 860 ZSF 861 GG 462
1 basin 106 x 240 x 90 mm
incl. draining tray
Basin height incl. pop-up waste set
250 mm Glacier 860 ZSF 861 GL 462
rippled draining board with overflow
strainer as 3 1/2‘‘ eccentric valve in the
large basin
cutout size 840 x 415 mm
minimum built-in width 510 mm
(600 mm sink base unit)
9.47
Item
width mm
universal
hinge
Franke Inset sink / ceramic black matt 560 ZSC 600 SW 705
500 mm deep
1 bowl 520 x 420 x 200 mm
with integral tap ledge with 2 drill holes high-gloss white 560 ZSC 600 WS 705
Basin height incl. outlet fitting 302 mm
With 3 1/2 inch strainer basket eccentric
valve.
cutout size 570 x 470 mm
minimum built-in width 560 mm
(600 mm sink base unit)
Franke Inset sink / ceramic black matt 860 ZSC 860 SW 888
435 mm deep
1 bowl 353 x 350 x 200 mm
2 drill holes high-gloss white 860 ZSC 860 WS 888
Basin height incl. outlet fitting 296 mm
With 3 1/2 inch strainer basket eccentric
valve.
cutout size 830 x 405 mm
minimum built-in width 415 mm
(450 mm sink base unit)
9.48
Item
width mm
universal
hinge
Lever mixer tap chrome-plated ZM 100 C 81
high pressure
with swivel outlet
flexible connections, quick fitting system,
mixer head with ceramic washers
9.49
Item
width mm
universal
hinge
Lever mixer tap with pullout spray chrome-plated ZM 103 C 174
head stainless steel- ZM 103 E 193
effect
high pressure
with swivel outlet
flexible connections according to DVGW/
W270, KTW, quick fitting system, low-
noise, replaceable 40 mm cartridge mixer
head with ceramic washers, with pullout
spray head,
5-year manufacturer‘s guarantee
9.50
Item
width mm
universal
hinge
Lever mixer tap chrome-plated ZM 70 C 133
stainless steel- ZM 70 E 149
high pressure effect
with swivel outlet
flexible connections, quick fitting system,
mixer head with ceramic washers
5-year manufacturer‘s guarantee
graphite
9.51
Item
width mm
universal
hinge
Franke-mixer tap with pullout spray graphite ZM 201 SF 239
head stone grey ZM 201 GG 239
Glacier ZM 201 GL 239
Fragranit+/Sanitized
high pressure
with flexible swivel outlet
flexible connections, quick fitting system,
mixer head with ceramic washers
graphite
9.52
Item
width mm
universal
hinge
Franke-mixer tap black matt ZM 300 SW 819
bronze ZM 300 BZ 819
high pressure white matt ZM 300 WS 819
Swivelling range 360°, flexible connec-
tions, mixer head with ceramic washers,
fixed spout
Wall spacing from hole centre at least
60 mm
black matt
9.53
Item
width mm
universal
hinge
Waste bin 355 ZA 40 62
Bin, powder-coated in stainless steel-effect, with replacement plastic
bin, Capacity 13 litres
in sink base unit from 400 mm wide
Minimum built-in height 400 mm
9.54
Item
width mm
universal
hinge
Waste separation system Anthracite
for ELITE, PREMIUM and ALPHA
Individually combinable waste separation system
The waste bins above a height of 321 mm can be installed in deep
drawers.
We recommend mats.
300 400/450 500 600 800 900 1000 1200
System storage lid Anthracite 600 mm unit width 568 ZAZ 600 55
900 mm unit width 868 ZAZ 900 65
for ELITE, PREMIUM and ALPHA
for individually combinable waste separation system
1 mounting set
for mounting on the carcase side
9.55
Item
width mm
universal
hinge
Waste separation system XXM 60 cm deep drawer width 553 ZA 603 AG 271
for PREMIUM and ALPHA
consisting of:
Container receptacle, powder-coated metal
2 containers, capacity 14 litres, 1 container lid
1 utensil basket
3 compartment dividers
222 mm high, 474 mm deep
STARLINE possible.
Waste separation system XXM 80 cm deep drawer width 753 ZA 803 AG 416
for PREMIUM and ALPHA
consisting of:
Container receptacle, powder-coated metal
2 containers, capacity 14 litres, 1 container lid
2 portable universal containers, capacity 4 litres, white
2 utensil baskets
5 compartment dividers
222 mm high, 474 mm deep
STARLINE possible.
Waste separation system XXM 90 cm deep drawer width 853 ZA 903 AG 446
for PREMIUM and ALPHA
consisting of:
Container receptacle, powder-coated metal
2 containers, capacity 14 litres, 1 container lid
2 portable universal containers, capacity 4 litres, white
1 integrated dustpan and brush set, red
2 utensil baskets
5 compartment dividers
222 mm high, 474 mm deep
STARLINE possible.
Waste separation system XXM 100 cm deep drawer width 953 ZA 1003 AG 532
for PREMIUM and ALPHA
consisting of:
Container receptacle, powder-coated metal
2 containers, capacity 14 litres, 1 container lid
2 portable universal containers, 4 litres each, white
1 integrated dustpan and brush set, red
2 utensil baskets
7 compartment dividers
222 mm high, 474 mm deep
STARLINE possible.
9.56
Item
width mm
universal
hinge
Waste separation system XXL over 30 cm deep drawer 257 ZA 301 AG 196
width
for PREMIUM and ALPHA
consisting of:
Container receptacle, powder-coated metal
1 container 18 litres 1 container, 2.5 litres
315 mm high, 488 mm deep
Waste separation system XXL over 45 cm deep drawer 407 ZA 451 AG 215
width
for PREMIUM and ALPHA
consisting of:
Container receptacle, powder-coated metal
1 container 12 litres
2 containers 8 litres each, 1 container lid
2 containers 2.5 litres each
315 mm high, 488 mm deep
Waste separation system XXL over 50 cm deep drawer 457 ZA 501 AG 249
width
for PREMIUM and ALPHA
consisting of:
Container receptacle, powder-coated metal
1 container 12 litres
2 containers 8 litres each, 1 container lid
2 containers 2.5 litres each
315 mm high, 488 mm deep
Waste separation system XXL over 60 cm deep drawer 557 ZA 601 AG 252
width
for PREMIUM and ALPHA
consisting of:
Container receptacle, powder-coated metal
1 container 18 litres
2 containers 8 litres each, 1 container lid
3 containers 2.5 litres each
315 mm high, 488 mm deep
9.57
9.58
Worktop/breakfast bar/
niche accessories
Item
width mm
universal
hinge
Table support with angled foot 1400 - 2000 mm long ZFT 7200 E 898
Stainless steel
711 mm high
800 mm deep
1400 mm - 2000 mm long
40 x 40 mm steel tube
Bench support with angled foot 1400 - 2000 mm long ZFB 7200 E 777
Stainless steel
415 mm high
430 mm deep
1400 mm - 2000 mm long
40 x 40 mm steel tube
Table support with angled foot Depth 350 mm 350 ZF 8935 E 524
Depth 600 mm 600 ZF 8960 E 553
for table attachments and desk panels
Stainless steel, brushed
For attaching to an island, for supporting free-standing worktops.
40 x 40 mm steel tube
Height adjustment 50 mm
height adjustable from 875 to 925 mm
Order worktop separately, 900 mm max. unsupported + 200 mm
projection
Worktop overlap: min. 50 mm, max. 150 mm per side
Only plan in combination with units.
Island support with angled foot Depth 350 mm 350 ZF 8135 E 524
Depth 600 mm 600 ZF 8160 E 553
same as above, but
height adjustable from 825 to 880 mm
9.59
Item
width mm
universal
hinge
Support bracket for breakfast bar gloss chrome 60 ZF 18 C 103
stainless steel 60 ZF 18 E 130
180 mm high, 345 mm deep
max. distance 900 mm
max. load 50 kg
Bracket black 40 ZF 47 S 87
same as above, but
9.60
Item
width mm
universal
hinge
Niche rail 900 mm long 900 ZNS 90 E 103
1500 mm long 1500 ZNS 150 E 158
Mounting strip with cover in stainless steel-look. 3000 mm long 3000 ZNS 300 E 307
For wall and niche mounting.
Set consisting of:
Rail, cover, 2 end caps and diffusor.
for hooking in niche elements. Order separately.
Niche elements
9.61
Item
width mm
universal
hinge
Glass shelf 895 ZNG 895 23
Clear glass
Suitable for shelf supports (ZN 850 C / ZN 850 E)
8 mm thick, 200 mm deep
9.62
Extractor system/
other accessories
Important instructions
It is not enough to have a good extractor hood for a good both exhaust air and supply air through one opening. For gas
ducting system. The flat pipe system with a wide range of and open fire places good ventilation is absolutely essential,
connectors, roundings or flexi-pipes and the quick and easy we recommend to seek professional advice if necessary.
fitting on top of wall units will create the perfect ventilation
system. High performance flat pipe system material: plastic cadmi-
um-free, flame-resistant to DIN 4102/BI, colour white.
A variety of parts for ducting to the outside are available as
well. A wall sleeve with an air vent is available to convey
exhaust air and supply air. It is designed in order to convey
Extractor system/
other accessories
Item
width mm
universal
hinge
Extractor set for extractor connection Ø 100 mm Ø 100 mm ZDS 1 150
Ø 125 mm ZDS 2 170
white Ø 150 mm ZDS 3 208
consisting of:
2 flat pipes 1000 mm long
1 coupling as intermediate section
1 connection elbow with flexible hose 1000 mm long
1 adapter for connection to wall sleeve
1 round wall sleeve
9.63
Item
width mm
universal
hinge
Protective strips matt chrome ZV 351 CM 43
350 mm long
side dimensions 5 x 16 mm to protect carcase edges on wall units
above hobs
2 items in set
9.64
Item
width mm
universal
hinge
Cleaning set per piece ZV 5506 537
consisting of:
5 x 500 ml front panel cleaner, high-gloss fronts
5 x 500 ml front panel cleaner, matt fronts
5 x 500 ml kitchen degreaser
7 x 250 ml stainless steel and chrome cleaner
Including dispenser with ALNO logo.
9.65
9.66
Special productions
780 mm high
10.01
715 mm high
330
330
KMM.. / FMM..
Section
8. Custom construction
10.02
910 mm high
780 mm high
10.03
650 mm high
10.04
2210 mm high
878
S.. 221 H SIA.. 221 H SU 88 221 H SU 102 2A 221 H SUB 2A 221 1 H SUMKB A 221 H
30-60 cm 30-60 cm
2080 mm high
S.. 208 H SIA.. 208 H SU 88 208 H SU 102 2A 208 H SUB 2A 208 1 H SUMKB A 208 H
30-60 cm 30-60 cm
10.05
1950 mm high
S.. 195 H SIA.. 195 H SU 88 195 H SU 102 2A 195 H SUB 2A 195 H SUMKB A 195 H
30-60 cm 30-60 cm
1300 mm high
S.. 130 H SIA.. 130 H SEKL.. 130 HA SU 122 130 H SUB SA 130 H SBF 15 130 H
30-60 cm 30-60 cm 110-125 cm
10.06
2210 mm high
S.. 221 M H SIA.. 221 M H SU 88 221 M H SU 88 2A 221 M H SUB S2A 221 M H SUMB A 221 M H
30-60 cm 30-60 cm
2080 mm high
S.. 208 M H SIA.. 208 M H SU 88 2A 208 M H SU 102 2A 208MH SUB S 208 2 M H SUMB A 208 M H
30-60 cm 30-60 cm
1361
688
10.07
1950 mm high
S.. 195 M H SIA.. 195 M H SU 88 195 M H SU 102 2A 195MH SUB S2A 195 M H SUMB A 195 M H
30-60 cm 30-60 cm
1300 mm high
S.. 130 H SIA.. 130 H SEKL.. 130 HA SU 122 130 H SUGA 130 M H SBF 15 130 H
30-60 cm 30-60 cm 110-125 cm
10.08
2210 mm high
S.. 221 V SB.. 221 V SA.. 221 VA SIA.. 221 V SU 88 221 V SU 122 A 221 V
30-60 cm 30-60 cm 30 cm 30-60 cm
SUB S2A 221 V SUMKB 2A 221 V SBF 15 221 V RBS 221 H WS../ WSK.. H PWS../ PWSK.. H
Width 16, 25 mm Width 50 mm
Section Section
10. Modular panels 10. Modular panels
2080 mm high
S.. 208 V SB.. 208 V SA.. 208 VA SIA.. 208 V SU 88 208 V SU 122 A 208 V
30-60 cm 30-60 cm 30 cm 30-60 cm
SUB S2A 208 V SUMKB 208 V SBF 15 208 V RBS 208 H WS../ WSK.. H PWS../ PWSK.. H
Width 16, 25 mm Width 50 mm
Section Section
10. Modular panels 10. Modular panels
10.09
1950 mm high
S.. 195 V SB.. 195 V SA.. 195 VA SIA.. 195 V SU 88 195 V SU 122 A 195 V
30-60 cm 30-60 cm 30 cm 30-60 cm
SUB 2A 195 1 V SUMKB 2A 195 V SBF 15 195 V RBS 195 H WS../ WSK.. H PWS../ PWSK.. H
Width 16, 25 mm Width 50 mm
Section Section
10. Modular panels 10. Modular panels
1560 mm high
S.. 156 V SB.. 156 V SA.. 156 VA SEKL.. 156 VA SU 88 2A 156 V SU 102 A 156 V
30-60 cm 30-60 cm 30 cm 110-125 cm
SUMBA 156 V SBF 15 156 V RBS 156 H WS../ WSK.. H PWS../ PWSK.. H P..
Width 16, 25 mm Width 50 mm Section
Section Section 5. Top panels
10. Modular panels 10. Modular panels
10.10
1300 mm high
1296
S.. 130 V SB.. 130 V SA.. 130 VAK SEKL.. 130 VA SU 102 2A 130 V SBF 15 130 V
30-60 cm 30-60 cm 30 cm 110-125 cm
10.11
2210 mm high
S.. 221 MV SB.. 221 MV SA.. 221 MVAK SIA.. 221 MV SU 88 221 MV SU 122 A 221 MV
30-60 cm 30-60 cm 30 cm 30-60 cm
SUB S2A 221 1 MV SUMKB 2A 221 MV RBS 221 MH WS../ WSK.. H PWS../ PWSK.. H
Width 16, 25 mm Width 50 mm
Section Section
10. Modular panels 10. Modular panels
2080 mm high
S.. 208 MV SB.. 208 MV SA.. 208 MVAK SIA.. 208 MV SU 88 208 MV SU 122 A 208 MV
30-60 cm 30-60 cm 30 cm 30-60 cm
SUB S2A 208 1 MV SUMKB 208 MV RBS 208 MH WS../ WSK.. H PWS../ PWSK.. H
Width 16, 25 mm Width 50 mm
Section Section
10. Modular panels 10. Modular panels
10.12
1950 mm high
1231
711
S.. 195 MV SB.. 195 MV SA.. 195 MVAK SIA.. 195 MV SU 88 195 MV SU 122 A 195 MV
30-60 cm 30-60 cm 30 cm 30-60 cm
1560 mm high
S.. 156 MV SB.. 156 MV SA.. 156 MVAK SEKL.. 156 MVA SU 88 2A 156 MV SU 102 A 156 MV
30-60 cm 30-60 cm 30 cm 110-125 cm
10.13
1300 mm high
1296
S.. 130 V SB.. 130 V SA.. 130 VAK SEKL.. 130 VA SU 88 A 130 M MV SBF 15 130 V
30-60 cm 30-60 cm 30 cm 110-125 cm
10.14
Item
width mm
universal
hinge
ELITE interior equipment per drawer 138
per deep drawer 163
Filigree closed drawer and deep drawer system with metal sides
and bottom in anthracite grey. Dynamic load-bearing capacity and per drawer 247
synchronized air glide system.
per deep drawer 272
This interior finish can be ordered at a surcharge via version type 65 in
the kitchen planning system.
Not for base units with drawer line, sink unit with waste separation
system XXL/XXXL. See item description for further exceptions.
ELITE interior equipment with Tip-On
This interior finish can be ordered at a surcharge via version type 66 in
the kitchen planning system.
Not for internal drawers or interior deep drawers. See item description
for further exceptions.
Not for internal drawers or interior deep drawers. See item description
for further exceptions.
Mat anthracite
Mats are easily ordered via the head type in the kitchen planning
system.
Mats are automatically enclosed for all drawers, deep drawers, internal
drawers and interior deep drawers, as well as for all carousel shelves
in corner base units.
10.15
Item
width mm
universal
hinge
Hinged door with Tip-On per hinged door 35
per flap door with tall units 35
The kitchen planning system provides the option of ordering Tip-On
for hinged doors as head version with version D25. The mechanical
Tip-On pen in dark grey is drilled into the carcase edge.
Flap doors on tall units become flap doors with Tip-On.
Tip-On is fitted in the bottom carcase panel for US80-US100, SP80-
SP100. Hinged appliance doors cannot be used.
10.16
Item
width mm
universal
hinge
Surcharge for carcase shelf with LED handle profile 6.1 watts 268 MP LED K 30 210
8.6 watts 368 MP LED K 40 236
handle profile radiating upwards and downwards 9.8 watts 418 MP LED K 45 250
LED lighting
Cable drill hole 44 mm from right-hand carcase edge 11.0 watts 468 MP LED K 50 262
1800 mm connecting lead with plugs 12.3 watts 518 MP LED K 55 273
Energy efficiency class A+ 13.5 watts 568 MP LED K 60 287
18.5 watts 768 MP LED K 80 345
Not possible for: open shelf units, dish drying units, corner wall units,
Neutral white approx. units with 2 hinged doors (except STARLINE), with sliding doors, roller 20.9 watts 868 MP LED K 90 371
4,000 K shutters or slats, as well as for cooker hoods and microwaves. 23.4 watts 968 MP LED K 100 395
Custom designs not possible. 28.3 watts 1168 MP LED K 120 453
Connecting accessories:
We recommend light control starter set. It must be ordered separately.
Additionally order ZLZ 53 IC for wattages higher than 30 watts. Light control starter set ZLZ 52 IC 240
Light control follow-on set ZLZ 53 IC 169
Additionally order ZLZ 72 for control by App. App control ZLZ 72 192
LED transformer 50 W ZLZ 54 84
Alternatively, transformers and switches can be used.
LED transformer 30 W ZLZ 55 72
LED transformer 15 W ZLZ 59 53
Standard switch ZLZ 8 29
LED touch dimmer ZLZ 26 94
Touch sensor switch ZLZ 12 48
Light sensor switch ZLZ 25 85
Wireless switch ZLZ 49 94
Extension cable ZLZ 181 22
Surcharge for carcase shelf with LED handle profile 3.5 watts 300 MP LED KU 30 167
4.9 watts 400 MP LED KU 40 183
handle profile radiating downwards only 5.6 watts 450 MP LED KU 45 192
LED lighting
Cable drill hole 44 mm from right-hand carcase edge 6.3 watts 500 MP LED KU 50 198
1800 mm connecting lead with plugs 7.7 watts 600 MP LED KU 60 212
Energy efficiency class A+ 10.5 watts 800 MP LED KU 80 251
11.9 watts 900 MP LED KU 90 269
Please order transformer and switch separately, ZLZ 54, 55, 59.
Neutral white approx. Not possible for: open shelf units, dish drying units, corner wall units, 13.3 watts 1000 MP LED KU 100 283
4,000 K units with 2 hinged doors (except STARLINE), with sliding doors, roller 16.1 Watts 1200 MP LED KU 120 322
shutters or slats, as well as for cooker hoods and microwaves. Connecting accessories:
Custom designs not possible. Light control starter set ZLZ 52 IC 240
We recommend light control starter set. It must be ordered separately. Light control follow-on set ZLZ 53 IC 169
Additionally order ZLZ 53 IC for wattages higher than 30 watts. App control ZLZ 72 192
LED transformer 50 W ZLZ 54 84
Additionally order ZLZ 72 for control by App. LED transformer 30 W ZLZ 55 72
Alternatively, transformers and switches can be used. LED transformer 15 W ZLZ 59 53
Standard switch ZLZ 8 29
Touch sensor switch ZLZ 12 48
LED touch dimmer ZLZ 26 94
Light sensor switch ZLZ 25 85
Wireless switch ZLZ 49 94
Extension cable ZLZ 181 22
Surcharge for wall unit with LED illuminated glass shelf 4,7 watts 418 MP LED BO 45 424
5,4 watts 468 MP LED BO 50 430
installed instead of the fixed base shelf 6.8 watts 568 MP LED BO 60 440
consisting of: 9,6 watts 768 MP LED BO 80 495
2 panels MDF with aluminium profile at the front, 11 watts 868 MP LED BO 90 509
matt silk toughened safety glass, loosely laid on top 12.4 watts 968 MP LED BO 100 532
30 mm high
LED lighting
Neutral white approx. Switch at front right
4,000 K LED transformer 15 W
1800 mm connecting lead with plugs
Energy efficiency class A+
Shelves are replaced by glass shelves.
Not possible for: open shelf units, dish drying units, corner wall units,
units with 2 hinged doors (except STARLINE), with sliding doors, roller
shutters or slats, as well as for cooker hoods and microwaves.
Custom designs not possible.
10.17
Item
width mm
universal
hinge
Additional charge for cable drillings bottom MPKBU 22
top MPKBO 22
8 mm dia. cable drill holes 200 mm deep at centre of wall units and
Edition Fly units. Flexible on request: on units > 600 mm with 2 drill
holes in any position (min. distance from carcase edge 85 mm), in
corner wall units or Edition-Fly corner base units.
Not possible with extractor hood units and end shelf units
Only at bottom for Edition Fly.
Not possible in end shelf units! Not possible with Edition Fly tall units
from a niche height of 1446 mm. Only possible in base panel for
Edition Fly and Softlift units.
Vertical light slot can be provided for glass door cabinets and shelf
units.
Two light slots on the left and right of the carcase.
2 x ZLV 180 IN: carcase height 390 mm for Softlift, Flap door, Parallel
lift-up unit
2 x ZLV 265 IN: carcase height 390 and 520 mm
2 x ZLV 415 IN: carcase height 650 and 780 mm for Units with upward
folding door and Softlift
2 x ZLV 630 IN: carcase height 780 mm and 910 mm, base shelf units
715 and 780 mm high
2 x ZLV 1150 IN: carcase height 1300 mm
LED recessed light with colour control 2.6 watts 180 ZLV 180 IN 66
3.5 watts 265 ZLV 265 IN 74
Laminate enclosure matt black 6 watts 415 ZLV 415 IN 94
Specified width includes 2 x 15 mm end lids
10.3 watts 630 ZLV 630 IN 126
We recommend light control starter set. It must be ordered separately. 18.4 watts 1150 ZLV 1150 IN 193
Additionally order ZLZ 61 IN for wattages higher than 60 watts. Connecting accessories:
Order light slot separately: MPKBV L. Light control starter set ZLZ 60 IN 150
Light control follow-on set ZLZ 61 IN 80
Extension cable ZLZ 181 22
10.18
Item
width mm
universal
hinge
LED built-in light linear 3.8 watts 267 ZLL 30 A 100
5.3 watts 367 ZLL 40 A 100
Aluminium profile with integrated LED light 6 watts 417 ZLL 45 A 103
1800 mm connection cable with plug connection
Energy efficiency class A+ 6.8 watts 467 ZLL 50 A 107
7.5 watts 517 ZLL 55 A 110
We recommend light control starter set. It must be ordered 8.3 watts 567 ZLL 60 A 113
separately. 11.3 watts 767 ZLL 80 A 132
Additionally order ZLZ 53 IC for wattages higher than 30 watts.
12.8 watts 867 ZLL 90 A 141
Additionally order ZLZ 72 for control by App. 14.3 watts 967 ZLL 100 A 150
17.3 watts 1167 ZLL 120 A 160
Alternatively, transformers and switches can be used. Connecting accessories:
Neutral white approx.
Order light slot separately: MPKBU L / MPKBO L. Light control starter set ZLZ 52 IC 240
4,000 K Light control follow-on set ZLZ 53 IC 169
App control ZLZ 72 192
LED transformer 50 W ZLZ 54 84
LED transformer 30 W ZLZ 55 72
LED transformer 15 W ZLZ 59 53
Standard switch ZLZ 8 29
LED touch dimmer ZLZ 26 94
Light sensor switch ZLZ 25 85
Wireless switch ZLZ 49 94
Extension cable ZLZ 181 22
linear LED recessed light with colour control 3.5 watts 267 ZLL 30 IC 107
4.9 watts 367 ZLL 40 IC 110
stainless steel-effect 5.6 watts 417 ZLL 45 IC 115
Aluminium profile with integrated LED light
Colour temperature infinitely variable from warm white to 6.3 watts 467 ZLL 50 IC 119
cold white. 7 watts 517 ZLL 55 IC 124
1800 mm connection cable with plug connection 7.7 watts 567 ZLL 60 IC 130
Energy efficiency class A+ 10.5 watts 767 ZLL 80 IC 153
We recommend light control starter set. It must be ordered 11.9 watts 867 ZLL 90 IC 164
separately. 13.3 watts 967 ZLL 100 IC 176
Additionally order ZLZ 53 IC for wattages higher than 30 watts. 16.1 Watts 1167 ZLL 120 IC 193
LED built-in light linear, short with colour control set of 3 ZLS 501 IC 575
per piece ZLI 501 IC 125
White glass cover Connecting accessories:
LED - 2.8 W / 12 V DC 250 x 50 x 6 mm
Colour temperature infinitely variable from warm white to Light control starter set ZLZ 52 IC 240
cold white. Light control follow-on set ZLZ 53 IC 169
1800 mm connection cable with plug connection App control ZLZ 72 192
Energy efficiency class A+
Set consisting of:
3 LED lights
Light control starter set
- 30-watt transformer with 6-way distributor
- Control module
colour control approx.
- 4-channel radio remote control
2,700 - 5,700 K
Can be extended up to 6 lights
Additionally order ZLZ 72 for control by App.
Order light slot separately: MPKBU L / MPKBO L.
10.19
Item
width mm
universal
hinge
LED built-in light ZL 55 E 39
stainless steel-effect Connecting accessories:
LED - 4 W / 12 V DC 250 lm Light control starter set ZLZ 52 IC 240
Installation dimension: Ø 55 mm, 12 mm installed depth Light control follow-on set ZLZ 53 IC 169
1800 mm connecting lead with plugs App control ZLZ 72 192
Energy efficiency class A+ LED transformer 50 W ZLZ 54 84
We recommend light control starter set. It must be ordered LED transformer 30 W ZLZ 55 72
separately. LED transformer 15 W ZLZ 59 53
Additionally order ZLZ 53 IC for wattages higher than 30 watts. Standard switch ZLZ 8 29
LED touch dimmer ZLZ 26 94
Additionally order ZLZ 72 for control by App. Light sensor switch ZLZ 25 85
Neutral white approx.
Alternatively, transformers and switches can be used. Wireless switch ZLZ 49 94
4,000 K Extension cable ZLZ 181 22
Order light slot separately: MPKBU L / MPKBO L.
LED built-in light ZL 78 E 97
stainless steel-effect Connecting accessories:
High-power LED chip Recessed switch set ZLZ 91 A 48
230 V 50/60 Hz, 3 watts, Ø 100 mm. Surface-mounted switch set ZLZ 21 E 51
Installation dimension: Ø 78 mm, 13 mm installation depth Distributor box ZLZ 91 31
2000 mm connecting lead with plugs Standard switch ZLZ 8 29
Energy efficiency class A++
Wireless switch ZLZ 49 94
Plan distributor ZLZ 91 for the electrical connection. Light sensor switch ZLZ 25 85
Extension cable ZLZ 78 34
no transformer necessary
LED built-in light with colour control Set of 3 ZLS 553 T 322
per piece ZLU 553 T 66
titanium-effect
LED - 2x2 W / 12 V DC
with wireless dimmer for infinitely variable adjustment between
warm and cool white
Installation dimension: Ø 55 mm, 10 mm installed depth
2000 mm connection cable with plugs
Energy efficiency class A+
Set consisting of:
3 LED lights
Electronic transformer 30 W
1 wireless dimmer with on and off function
colour control approx.
mains cable 1500 mm with Euro plug
3,200 - 5,500 K
Can be extended up to 6 lights
10.20
S78
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Base unit U 30 H 424 470 508 541 561 - - 699 813
U 40 H 449 494 531 568 591 - - 727 910
1 hinged door U 45 H 462 508 544 579 604 - - 747 960
2 adjustable shelves
U 50 H 470 516 551 593 617 - - 762 1007
Matching accessories: U 60 H 497 540 576 627 654 - - 797 1106
Waste-disposal system ZA 4000 can be
fitted from 450 mm width.
Base unit for trays and baking tins UAB 15 HA 818 855 886 921 946 - - 1050 1078
1 deep drawer with
1 fixed wire basket and baking tray holder
The anti-tilt device which is supplied automatically must be fitted for room divider versions. 10.21
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Base unit with interior deep drawers UISIA 30 H 1076 1122 1161 1195 1216 - - 1356 1443
UISIA 45 H 1117 1163 1200 1237 1262 - - 1408 1594
1 hinged door UISIA 50 H 1126 1173 1208 1251 1277 - - 1425 1643
1 internal drawer
2 interior deep drawers UISIA 60 H 1151 1194 1232 1283 1311 - - 1457 1741
Base unit with interior deep drawers UIA 30 H 1068 1114 1153 1186 1207 - - 1347 1435
UIA 45 H 1108 1154 1190 1227 1252 - - 1397 1585
1 hinged door UIA 50 H 1117 1164 1200 1242 1268 - - 1416 1635
3 interior deep drawers
ELITE 2 interior deep drawers UIA 60 H 1142 1186 1224 1276 1304 - - 1449 1734
Base unit UAA 30 HA 908 956 991 1025 1046 - - 1181 1272
1 larder pull-out for organising in any way
Arena shelf for pull-out larder unit ZI 30 AG 140 140 140 140 140 140 140 140 140
Anthracite grey
Orgaset 1 for pull-out larder unit ZI 30 11 AG 296 296 296 296 296 296 296 296 296
Anthracite grey
Set consists of 2 inserts.
Top insert comprising:
2 boxes (1.0 l), 1 box (2.1 l), 2 boxes
(2.0 l),
1 divider for knives, 2 lids, 2 support rails
bottom insert comprises:
1 box (3.2 l), 1 tray (1.1 L) with bottle
railing, 3 small dividers, 3 large dividers,
2 holders
Orgaset 2 for pull-out larder unit ZI 30 12 AG 135 135 135 135 135 135 135 135 135
Anthracite grey
Set consisting of:
2 boxes (1.0 l), 2 boxes (2.1 l), 2 lids,
1 large divider, 2 stpport rails
10.22 The anti-tilt device which is supplied automatically must be fitted for room divider versions.
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Base unit for provisions UT 60 HA 1083 1126 1162 1213 1240 - - 1383 1692
1 hinged door
1 fixed basket
1 Orgaset
2 adjustable shelves in 410 mm depth
Base unit with interior drawer UAIS 30 1 H 783 832 869 903 924 - - 1063 1163
1 deep drawer
1 internal drawer
Matching accessories:
Bottle basket ZI 6 SG
Base unit with interior drawers UAIS 30 H 843 893 928 963 984 - - 1122 1215
UAIS 45 H 886 932 968 1006 1030 - - 1175 1377
1 deep drawer UAIS 50 H 895 939 976 1019 1043 - - 1192 1423
2 internal drawers
UAIS 60 H 920 964 1002 1055 1083 - - 1228 1522
Matching accessories:
Driver for internal drawer EZIZ..
Base unit U2SA 30 H 862 895 930 1006 1092 - - 1327 1659
U2SA 40 H 906 940 976 1062 1143 - - 1393 1743
2 drawers U2SA 45 H 925 962 996 1083 1165 - - 1424 1778
1 deep drawer
U2SA 50 H 947 981 1013 1111 1196 - - 1456 1809
U2SA 60 H 987 1022 1061 1164 1245 - - 1508 1883
U2SA 80 H 1252 1284 1315 1470 1565 - - 1807 2375
U2SA 90 H 1298 1324 1360 1525 1622 - - 1858 2450
U2SA 100 H 1343 1372 1406 1579 1677 - - 1922 2528
U2SA 120 H 1515 1545 1581 1768 1870 - - 2121 2697
710 U2SA 30 7H 1069 1101 1136 1212 1299 - - 1534 1858
710 U2SA 40 7H 1112 1146 1182 1268 1348 - - 1599 1943
710 U2SA 45 7H 1132 1169 1203 1290 1373 - - 1632 1979
710 U2SA 50 7H 1154 1188 1220 1317 1403 - - 1662 2008
710 U2SA 60 7H 1195 1230 1269 1372 1454 - - 1716 2084
710 U2SA 80 7H 1398 1431 1462 1617 1712 - - 1954 2518
710 U2SA 90 7H 1444 1470 1506 1671 1768 - - 2004 2592
710 U2SA 100 7H 1488 1516 1549 1724 1822 - - 2067 2666
Base unit U2A 30 H 713 753 786 849 893 990 - 1064 1216
U2A 40 H 755 795 828 899 942 1048 - 1133 1329
2 deep drawers U2A 45 H 769 813 842 913 956 1062 - 1167 1376
U2A 50 H 786 826 856 938 980 1089 - 1201 1423
U2A 60 H 818 862 894 987 1021 1134 - 1243 1528
U2A 80 H 1081 1104 1135 1265 1315 1414 - 1512 1923
U2A 90 H 1111 1133 1171 1306 1362 1473 - 1544 2019
U2A 100 H 1151 1173 1207 1354 1415 1542 - 1608 2126
U2A 120 H 1270 1297 1339 1495 1565 1694 - 1768 2258
710 U2A 30 7H 954 995 1027 1089 1133 - - 1306 1446
710 U2A 40 7H 998 1037 1071 1140 1185 - - 1376 1561
710 U2A 45 7H 1012 1056 1085 1157 1199 - - 1411 1608
710 U2A 50 7H 1029 1070 1099 1182 1224 - - 1444 1655
710 U2A 60 7H 1061 1106 1136 1231 1265 - - 1487 1758
710 U2A 80 7H 1283 1307 1338 1467 1518 - - 1715 2115
710 U2A 90 7H 1313 1336 1374 1508 1565 - - 1747 2210
710 U2A 100 7H 1352 1375 1409 1556 1616 - - 1808 2316
Base unit U2AIS 30 H 833 873 907 969 1013 1112 - 1185 1330
U2AIS 40 H 876 916 950 1020 1064 1169 - 1256 1445
2 deep drawers U2AIS 45 H 890 934 964 1035 1077 1184 - 1288 1492
1 interior drawer at top
U2AIS 50 H 909 949 978 1061 1103 1212 - 1323 1539
Matching accessories: U2AIS 60 H 940 984 1016 1111 1144 1258 - 1366 1644
Driver for internal drawer EZIZ.. U2AIS 80 H 1203 1226 1258 1386 1436 1535 - 1634 2038
U2AIS 90 H 1232 1256 1293 1427 1484 1595 - 1666 2134
U2AIS 100 H 1272 1295 1328 1475 1536 1664 - 1729 2241
U2AIS 120 H 1391 1419 1461 1617 1686 1816 - 1889 2375
The anti-tilt device which is supplied automatically must be fitted for room divider versions. 10.23
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Corner base unit UEK 80 HA 1384 1476 1549 1614 1658 - - 1937 2140
Pl. dim. 818 mm
Divided inwards pivoting door with UEK 90 HA 1511 1602 1674 1741 1790 - - 2072 2350
cushioning Pl. dim. 918 mm
2 carousel shelves
Arena shelf finish anthracite grey
Unit can be dismantled on site
Corner base unit UE 105 H 667 712 750 786 809 - - 946 1117
with 40 cm door
1 hinged door UE 110 H 671 716 752 789 814 - - 957 1162
2 adjustable shelves with 45 cm door
carcase width 1000 mm, without corner UE 115 H 681 727 762 804 829 - - 974 1209
infill panel with 50 cm door
UE 125 H 697 740 776 826 854 - - 997 1294
Corner panel UEBE 65 1 H to be ordered with 60 cm door
left version shown separately
Corner base unit UEKL 110 HA 1614 1660 1695 1734 1758 - - 1902 2063
with 45 cm door
1 hinged door UEKL 115 HA 1665 1712 1746 1789 1815 - - 1960 2152
2 fully pivotable height adjustable with 50 cm door
carousel shelves LeMans
UEKL 125 HA 1749 1793 1830 1881 1908 - - 2053 2305
Arena shelf finish anthracite grey carcase with 60 cm door
width 1000 mm, without corner infill
panel
left version shown
Order corner panel UEBE 65 1 H sepa-
rately.
Matching accessories:
self-closing ZID 29 AG
Corner infill panel UEBE 65 1 H 161 171 208 260 277 - - 420 443
For corner base unit
fixed size corner infill mitred
planning dimensions 650 x 650 mm
Corner infill panel UEBE 20 VH 212 273 321 372 414 - - 576 656
same as above, but
variable corner infill panel mitred
Dimensions: 628 - 740 mm per side piece
Base unit for built-under oven UH 60 H 460 470 478 521 545 - - 607 797
niche height 585 - 595 mm
with front panel
Base unit for built-under oven UHW 60 H 704 713 721 764 787 - - 851 1034
niche height 585 - 595 mm
with plinth drawer 170 mm high.
10.24 The anti-tilt device which is supplied automatically must be fitted for room divider versions.
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Base unit for hob UKSA 60 H 959 993 1032 1134 1216 - - 1478 1869
or induction hob UKSA 80 H 1227 1260 1289 1445 1539 - - 1783 2350
UKSA 90 H 1273 1299 1335 1499 1597 - - 1833 2423
1 fixed front panel
1 cable protection shelf UKSA 100 H 1318 1346 1380 1553 1651 - - 1897 2501
1 drawer UKSA 120 H 1412 1442 1477 1664 1766 - - 2017 2599
1 deep drawer UKSA 60 7H 1206 1240 1279 1382 1464 - - 1726 2096
710
710 UKSA 80 7H 1428 1461 1491 1646 1740 - - 1984 2533
710 UKSA 90 7H 1475 1501 1537 1701 1799 - - 2035 2607
710 UKSA 100 7H 1520 1547 1581 1755 1852 - - 2098 2685
Base unit for hob UKH2SA 60 H 1126 1161 1200 1303 1384 - - 1646 2028
or induction hob UKH2SA 80 H 1432 1465 1495 1650 1745 - - 1988 2547
UKH2SA 90 H 1520 1545 1581 1746 1843 - - 2080 2659
1 heat shield / shelf to prevent accidental
contact UKH2SA 100 H 1604 1633 1666 1840 1938 - - 2183 2774
2 drawers UKH2SA 120 H 1819 1848 1884 2071 2173 - - 2424 2985
1 deep drawer
Base unit for hob UKH2A 60 H 957 1001 1032 1126 1160 - - 1382 1660
or induction hob UKH2A 80 H 1263 1285 1317 1446 1496 - - 1693 2095
UKH2A 90 H 1333 1356 1393 1528 1584 - - 1767 2230
1 heat shield / shelf to prevent accidental
contact UKH2A 100 H 1413 1435 1469 1616 1677 - - 1870 2375
2 deep drawers UKH2A 120 H 1572 1599 1641 1797 1867 - - 2070 2547
Base unit for retractable or hob-level UKU2A 90 H 1138 1167 1201 1272 1350 - - 1547 2185
extractor UKU2A 100 H 1171 1206 1234 1314 1399 - - 1602 2279
UKU2A 120 H 1257 1289 1326 1408 1497 - - 1720 2389
2 deep drawers
Base unit for retractable or hob-level UKU2A 90 1 H 1138 1167 1201 1272 1350 - - 1547 2185
extractor UKU2A 100 1 H 1171 1206 1234 1314 1399 - - 1602 2279
UKU2A 120 1 H 1257 1289 1326 1408 1497 - - 1720 2389
1 fixed panel
1 drawer
1 deep drawer
The anti-tilt device which is supplied automatically must be fitted for room divider versions. 10.25
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Corner sink base unit SPE 105 H 640 685 723 761 783 - - 922 1098
with 40 cm door
1 hinged door SPE 115 H 655 701 736 778 804 - - 951 1189
with 50 cm door
carcase width 1000 mm, without corner
infill panel SPE 125 H 669 713 750 801 828 - - 973 1277
with 60 cm door
Corner panel UEBE 65 1 H to be ordered
separately
left version shown
Matching accessories:
Waste-disposal system ZA 401.
Sink base unit SP 45 H 441 486 522 560 584 - - 728 946
SP 50 H 456 503 538 580 606 - - 752 1001
1 hinged door SP 60 H 483 527 564 615 643 - - 787 1101
Matching accessories:
Drip inserts EZIT .. A
Sink base unit SP 80 H 653 744 820 889 933 - - 1212 1599
SP 90 H 674 766 838 913 962 - - 1251 1696
2 hinged doors SP 100 H 698 792 861 939 990 - - 1283 1799
Matching accessories: SP 120 H 727 815 889 978 1033 - - 1322 1974
Drip inserts EZIT .. A
Sink base unit SPA 45 H 417 461 498 536 560 - - 704 924
SPA 50 H 432 477 513 556 580 - - 727 978
1 door loose SPA 60 H 458 502 539 592 619 - - 764 1076
Sink base unit SPA 45 1 H 539 582 616 644 671 - - 810 1135
SPA 50 1 H 551 594 629 657 684 - - 824 1152
1 reduced-depth deep drawer SPA 60 1 H 565 609 645 674 702 - - 846 1183
450 mm deep
Matching accessories:
set of Servodrive accessories ZAZ 7
Sink base unit SP2A 60 H 926 971 1003 1098 1132 1246 - 1357 1639
SP2A 80 H 1192 1216 1247 1378 1429 1529 - 1628 2039
2 deep drawers SP2A 90 H 1221 1244 1282 1418 1476 1588 - 1661 2135
Upper deep drawer with low back panel,
reduced 150 mm from the back. SP2A 100 H 1255 1278 1312 1461 1522 1651 - 1718 2238
350 mm deep SP2A 120 H 1303 1325 1361 1526 1597 1754 - 1786 2407
10.26 The anti-tilt device which is supplied automatically must be fitted for room divider versions.
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Sink base unit with waste separation SPAMH 45 H 1021 1066 1103 1139 1165 - - 1309 1499
and deep drawer with reduced depth SPAMH 50 H 1073 1118 1154 1196 1221 - - 1369 1586
SPAMH 60 H 1135 1179 1216 1270 1297 - - 1442 1720
1 deep drawer with waste separation
system
with reduced-depth deep drawer
400 mm deep for use with
low-lying service valves
or drains
1 cover shelf
waste separation system consisting of:
45 cm wide:
2 containers, 14 litres
50 cm wide:
2 containers 10 litres
1 container lid
1 container 14 litres
60 cm wide:
2 containers 10 litres
1 container lid
1 container 20 litres
Sink base unit with waste separation SPAISM 45 H 1236 1280 1317 1355 1379 - - 1522 1703
SPAISM 50 H 1284 1329 1365 1408 1432 - - 1580 1788
1 deep drawer with waste separation SPAISM 60 H 1350 1394 1431 1484 1512 - - 1655 1925
system XXL 500 mm deep
1 internal drawer With wire rack for
storing cleaning products.
waste separation system consisting of:
45 cm wide:
1 container 12 litres
2 containers 8 litres each
1 container lid
2 containers 2.5 litres each
50 cm wide:
1 container 12 litres
2 containers 8 litres each
1 container lid
2 containers 2.5 litres each
60 cm wide:
1 container 18 litres
2 containers 8 litres each
1 container lid
3 containers 2.5 litres each
The anti-tilt device which is supplied automatically must be fitted for room divider versions. 10.27
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Sink base unit with waste separation SPAM 60 1 H 1280 1324 1361 1414 1441 - - 1586 1858
1 deep drawer with waste separation
system XXXL 500 mm deep
waste separation system consisting of:
2 containers 13 litres, 1 lid,
1 container 30 litres
Sink base unit with waste separation SPAM 60 3 H 2030 2073 2110 2163 2191 - - 2335 2570
1 deep drawer with waste separation
system
450 mm deep
waste separation system consisting of:
1 container 40 litres
1 organic waste pin, 6 litre, with lid
1 container, 1.2 litres
System storage lid
The 40 litre bin accommodates a 35 litre
waste bag (CH).
Front panel GSBV 45 XH 167 214 251 298 323 - - 471 708
GSBV 60 XH 182 227 265 320 349 - - 498 837
for fully integrated dishwashers
1 front panel
Front panel with distance frame GSBV 45 1 H 253 299 337 384 409 - - 557 789
GSBV 60 1 H 267 312 351 406 435 - - 583 920
for fully integrated dishwashers
1 front panel
With distance frame and fitted recessed
grip
10.28 The anti-tilt device which is supplied automatically must be fitted for room divider versions.
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Front panel FWI 60 H 182 227 265 320 349 - - 498 837
for fully integrated washing machines
1 front panel
Front panel FKI 60 H 203 248 287 341 369 - - 518 858
for fully integrated refrigerators and
freezers
1 front panel
Infill panel for base units UBF 15 H 130 140 149 158 166 - - 211 258
Finish in door material
fitted between wall and carcase
and for fitting next to appliances
Corner infill panel for base units UEBF 65 1 H 197 203 241 294 311 - - 455 495
Finish in door material
for 90° corner solution
for planning dimensions 650 x 650 mm
Corner infill panel for base units UEBF 20 VH 234 288 324 352 385 - - 514 552
Finish in door material
For variable planning dimensions for 90°
corner solution
Min. dimension 50 mm per side.
max. 180 mm on carcase front edge per
leg
Side cladding RBS 78 H 524 559 591 627 952 - - 1167 1214
for mounting on the carcase side
50 mm wide
Finish in door material
600 mm deep
for carcase depth 560 mm
Side cladding RBS 78 7 H 541 579 614 652 1071 - - 1312 1337
same as above, but
for carcase depth 710 mm
10.29
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Side cladding RBS 78 RH 629 665 697 728 1108 - - 1360 1388
for mounting on the carcase side
50 mm wide
Finish in door material
for room divider and carcase depth
560 mm
Side cladding RBS 78 7 RH 644 685 723 759 1225 - - 1503 1506
for mounting on the carcase side
50 mm wide
Finish in door material
for room divider and carcase depth
710 mm
Side cladding RBS 78 RV H 677 723 759 795 1435 - - 1758 1769
same as above, but
for room divider, variable depth from
100-1164 mm
Side cladding RBS 789 1 RH 677 723 759 795 1435 - - 1758 1789
for mounting on the carcase side
50 mm wide
Finish in door material
for room divider base unit 560 mm deep
and display unit 350 mm deep
Height- and depth-variable side RBS UV H 621 663 701 736 1203 - - 1454 1485
panelling
for mounting on the carcase side
50 mm wide
Finish in door material
Depth variable from 100 to 752 mm
Height variable from 100 to 753 mm
(753 mm for carcase height 780 mm and
688 mm for carcase height 715 mm)
Side cladding RBS 78 1 GS H 549 581 613 648 975 - - 1192 1238
next to dishwasher
50 mm wide
Finish in door material
for carcase depth 560 mm
with integrated floor-length modular
support panel 16 mm
Side panelling depth adjustable RBS 78 1 GS RV H 668 709 748 783 1248 - - 1527 1534
next to dishwasher
50 mm wide
Finish in door material
for room dividers
Depth variable from 100 to 1164 mm
with integrated floor-length modular
support panel 16 mm
10.30
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Side cladding two-part RBS2 78 H 990 1057 1122 1185 1685 - - 2042 2124
for mounting on the carcase side
50 mm wide
Finish in door material
600 mm deep
for carcase depth 560 mm
Side cladding two-part RBS2 78 7 H 1023 1094 1167 1230 1897 - - 2297 2307
same as above, but
for carcase depth 710 mm
Side cladding two-part RBS2 78 RH 1189 1257 1324 1377 1960 - - 2381 2431
for mounting on the carcase side
50 mm wide
Finish in door material
for room divider and carcase depth
560 mm
Side cladding two-part RBS2 78 7 RH 1217 1295 1375 1433 2169 - - 2631 2660
for mounting on the carcase side
50 mm wide
Finish in door material
for room divider and carcase depth
710 mm
Side cladding two-part RBS2 78 RV H 1279 1368 1441 1502 2541 - - 3078 3096
same as above, but
for room divider, variable depth from
100-1164 mm
Side cladding two-part RBS2 789 1 RH 1279 1368 1441 1502 2541 - - 3078 3129
for mounting on the carcase side
50 mm wide
Finish in door material
for room divider base unit 560 mm deep
and display unit 350 mm deep
Side panelling depth adjustable two- RBS2 78 V H 1238 1321 1404 1481 2105 - - 2552 2566
part
for mounting on the carcase side
50 mm wide
Finish in door material
Depth variable from 100 to 752 mm
10.31
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Base unit UA 60 39 H 538 560 575 619 635 - - 747 885
UA 80 39 H 663 674 690 747 772 - - 870 1076
1 deep drawer UA 90 39 H 687 700 718 777 806 - - 897 1134
UA 100 39 H 710 721 738 803 833 - - 930 1189
UA 120 39 H 782 796 817 887 922 - - 1023 1270
Base unit UAIS 60 39 H 675 698 713 756 773 - - 884 1018
UAIS 80 39 H 800 812 827 884 909 - - 1008 1208
1 deep drawer UAIS 90 39 H 825 836 856 914 942 - - 1034 1266
1 internal drawer
UAIS 100 39 H 848 859 875 940 971 - - 1068 1321
UAIS 120 39 H 921 934 956 1025 1060 - - 1162 1400
Infill panel for base units UBF 15 39 H 100 110 118 128 139 - - 177 221
Finish in door material
fitted between wall and carcase
Corner infill panel for base units UEBF 65 39 H 161 171 208 256 268 - - 395 438
Finish in door material
for 90° corner solution
for planning dimensions 650 x 650 mm
Corner infill panel for base units UEBF 20 39 VH 186 204 241 274 307 - - 401 489
Finish in door material
For variable planning dimensions
for 90° corner solution
Min. dimension 50 mm per side.
Max. 180 mm at the carcase front edge
per side.
Side cladding RBS 39 H 496 528 562 594 846 - - 1005 1008
for mounting on the carcase side
50 mm wide
Finish in door material
for carcase depth 560 mm
Side cladding RBS 39 RV H 615 631 652 708 1039 - - 1342 1346
for mounting on the carcase side
50 mm wide
Finish in door material
for room divider, variable depth from
100-1164 mm
10.32 An anti-tilt device is needed for room divider versions. See section Accessories/Other accessories.
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Surcharge for room divider version 1 MPRT 1 144 144 144 144 144 144 144 144 144
per unit
the unit is prepared to receive fixed back
panels
The rear carcase edge colour matches
the front carcase edge.
The room divider can be freely planned
and does not depend on the type of unit.
Back panel two-part RB2 30 78 H 373 410 489 543 602 - - 747 1003
RB2 40 78 H 391 420 504 558 615 - - 764 1139
Finish in door material RB2 45 78 H 400 428 507 564 622 - - 777 1214
753 mm high (363+363 mm)
to be fitted to the back of free standing RB2 50 78 H 407 435 514 570 629 - - 792 1284
base units RB2 60 78 H 425 447 530 602 663 - - 817 1422
An anti-tilt device is needed for room divider versions. See section Accessories/Other accessories. 10.33
10.34
715/357 mm
Base units
S72
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Base unit U 30 72 H 410 454 491 522 542 - - 666 786
U 40 72 H 432 475 512 548 569 - - 692 876
1 hinged door U 45 72 H 446 490 524 558 582 - - 711 923
1 adjustable shelf
U 50 72 H 452 497 529 570 594 - - 729 963
Matching accessories: U 60 72 H 478 519 555 604 629 - - 771 1056
Waste-disposal system ZA 4000 can be
fitted from 450 mm width.
Base unit for trays and baking tins UAB 15 72 HA 806 843 873 908 932 - - 1035 1065
1 deep drawer with
1 fixed wire basket and baking tray holder
The anti-tilt device which is supplied automatically must be fitted for room divider versions. 10.35
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Base unit UAA 30 72 HA 875 914 944 974 991 - - 1150 1246
1 larder pull-out for organising in any way
Arena shelf for pull-out larder unit ZI 30 AG 140 140 140 140 140 140 140 140 140
Anthracite grey
Orgaset 1 for pull-out larder unit ZI 30 11 AG 296 296 296 296 296 296 296 296 296
Anthracite grey
Set consists of 2 inserts.
Top insert comprising:
2 boxes (1.0 l), 1 box (2.1 l), 2 boxes
(2.0 l),
1 divider for knives, 2 lids, 2 support rails
bottom insert comprises:
1 box (3.2 l), 1 tray (1.1 L) with bottle
railing, 3 small dividers, 3 large dividers,
2 holders
Orgaset 2 for pull-out larder unit ZI 30 12 AG 135 135 135 135 135 135 135 135 135
Anthracite grey
Set consisting of:
2 boxes (1.0 l), 2 boxes (2.1 l), 2 lids,
1 large divider, 2 stpport rails
Base unit for provisions UT 60 72 HA 1064 1105 1141 1190 1215 - - 1357 1642
1 hinged door
1 fixed basket
1 Orgaset
2 adjustable shelves in 410 mm depth
Base unit with interior deep drawers UISIA 30 72 H 1057 1102 1139 1173 1193 - - 1323 1417
UISIA 45 72 H 1093 1139 1175 1212 1236 - - 1371 1558
1 hinged door UISIA 50 72 H 1101 1146 1181 1223 1248 - - 1391 1599
1 internal drawer
2 interior deep drawers UISIA 60 72 H 1125 1168 1205 1255 1281 - - 1430 1689
10.36 The anti-tilt device which is supplied automatically must be fitted for room divider versions.
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Base unit with interior drawer UAIS 30 72 1 H 765 813 849 881 903 - - 1030 1136
1 deep drawer
1 internal drawer
Matching accessories:
Bottle basket ZI 6 SG
Driver for internal drawer EZIZ..
Base unit with interior drawers UAIS 30 72 H 824 873 908 941 963 - - 1090 1188
UAIS 45 72 H 864 909 944 980 1005 - - 1138 1337
1 deep drawer UAIS 50 72 H 871 914 951 991 1016 - - 1158 1378
2 internal drawers
UAIS 60 72 H 896 938 975 1027 1055 - - 1200 1470
Matching accessories:
Driver for internal drawer EZIZ..
Base unit U2SA 30 72 H 857 889 925 1000 1086 - - 1314 1649
U2SA 40 72 H 896 929 965 1050 1130 - - 1375 1717
2 drawers U2SA 45 72 H 912 949 981 1068 1149 - - 1400 1744
1 deep drawer
U2SA 50 72 H 937 972 1003 1100 1185 - - 1439 1785
U2SA 60 72 H 969 1003 1041 1142 1222 - - 1488 1838
U2SA 80 72 H 1235 1267 1297 1450 1544 - - 1790 2329
U2SA 90 72 H 1277 1303 1337 1500 1595 - - 1842 2387
U2SA 100 72 H 1317 1344 1378 1547 1644 - - 1904 2448
U2SA 120 72 H 1486 1516 1550 1734 1834 - - 2098 2615
Base unit U2A 30 72 H 704 744 776 838 881 - - 1040 1202
U2A 40 72 H 734 772 806 874 916 - - 1098 1281
2 deep drawers U2A 45 72 H 744 786 814 882 924 - - 1124 1312
U2A 50 72 H 769 808 836 918 959 - - 1171 1377
U2A 60 72 H 782 824 855 945 976 - - 1207 1440
U2A 80 72 H 1048 1070 1101 1226 1274 - - 1480 1831
U2A 90 72 H 1068 1090 1126 1256 1310 - - 1515 1892
U2A 100 72 H 1098 1119 1152 1291 1349 - - 1574 1969
U2A 120 72 H 1212 1238 1278 1427 1493 - - 1725 2095
Base unit U2AIS 30 72 H 823 863 897 958 1001 - - 1161 1316
U2AIS 40 72 H 872 912 946 1016 1059 - - 1245 1427
2 deep drawers U2AIS 45 72 H 863 906 934 1004 1044 - - 1245 1427
1 interior drawer with low drawer side
profile at top U2AIS 50 72 H 890 929 959 1039 1080 - - 1294 1493
U2AIS 60 72 H 903 946 975 1067 1099 - - 1330 1559
Matching accessories: U2AIS 80 72 H 1168 1191 1222 1346 1395 - - 1601 1947
Driver for internal drawer EZIZ.. U2AIS 90 72 H 1188 1211 1247 1376 1431 - - 1637 2007
U2AIS 100 72 H 1218 1240 1271 1412 1470 - - 1695 2085
U2AIS 120 72 H 1332 1358 1398 1547 1614 - - 1846 2210
Corner base unit UEK 80 72 HA 1329 1417 1487 1548 1590 - - 1841 2059
Pl. dim. 818 mm
Divided inwards pivoting door with UEK 90 72 HA 1465 1553 1622 1687 1735 - - 1976 2293
cushioning Pl. dim. 918 mm
2 carousel shelves
Arena shelf finish anthracite grey
Unit can be dismantled on site
Corner base unit UE 105 72 H 647 691 727 763 784 - - 909 1082
with 40 cm door
1 hinged door UE 110 72 H 651 694 728 765 788 - - 919 1123
1 adjustable shelf with 45 cm door
carcase width 1000 mm, without corner UE 115 72 H 659 704 736 777 802 - - 939 1163
infill panel with 50 cm door
UE 125 72 H 674 715 751 800 826 - - 968 1242
Corner infill panel UEBE 65 72 H must be with 60 cm door
left version shown ordered separately.
The anti-tilt device which is supplied automatically must be fitted for room divider versions. 10.37
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Corner base unit UEKL 110 72 HA 1587 1632 1668 1705 1730 - - 1865 2025
with 45 cm door
1 hinged door UEKL 115 72 HA 1636 1682 1716 1758 1783 - - 1926 2105
2 fully pivotable height adjustable with 50 cm door
carousel shelves LeMans
Arena shelf finish anthracite grey UEKL 125 72 HA 1719 1762 1798 1848 1875 - - 2023 2250
with 60 cm door
carcase width 1000 mm, without corner
infill panel
left version shown
Corner infill panel UEBE 65 72 H must be
ordered separately.
Matching accessories:
self-closing ZID 29 AG
Corner infill panel UEBE 65 72 H 150 160 194 243 259 - - 394 411
For corner base unit
fixed size corner infill mitred
planning dimensions 650 x 650 mm
Corner infill panel UEBE 20 72 VH 199 256 301 349 388 - - 529 621
For corner base unit
variable corner infill panel mitred
Dimensions: 628 - 740 mm per side piece
Base unit for built-under oven UH 60 72 H 459 469 477 520 544 - - 603 807
niche height 585 - 595 mm
with front panel
Base unit for hob UKSA 60 72 H 939 973 1012 1112 1191 - - 1457 1821
or induction hob UKSA 80 72 H 1210 1242 1271 1425 1518 - - 1764 2301
UKSA 90 72 H 1251 1277 1312 1473 1569 - - 1815 2356
1 fixed front panel
1 cable protection shelf UKSA 100 72 H 1290 1319 1352 1521 1617 - - 1877 2419
1 drawer UKSA 120 72 H 1381 1412 1445 1628 1728 - - 1991 2513
1 deep drawer
Base unit for hob UKH2SA 60 72 H 1106 1140 1178 1279 1360 - - 1625 1982
or induction hob UKH2SA 80 72 H 1413 1445 1475 1628 1722 - - 1969 2496
UKH2SA 90 72 H 1496 1521 1557 1719 1815 - - 2061 2592
1 heat shield / shelf to prevent accidental
contact UKH2SA 100 72 H 1575 1602 1635 1806 1902 - - 2163 2693
2 drawers UKH2SA 120 72 H 1785 1815 1849 2033 2133 - - 2398 2898
1 deep drawer
Base unit for hob UKH2A 60 72 H 918 960 990 1080 1113 - - 1344 1571
or induction hob UKH2A 80 72 H 1226 1248 1279 1405 1454 - - 1660 2001
UKH2A 90 72 H 1286 1308 1344 1475 1529 - - 1735 2101
1 heat shield / shelf to prevent accidental
contact UKH2A 100 72 H 1355 1376 1408 1549 1608 - - 1834 2215
2 deep drawers UKH2A 120 72 H 1508 1534 1574 1724 1790 - - 2024 2378
10.38 The anti-tilt device which is supplied automatically must be fitted for room divider versions.
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Base unit for retractable or hob-level UKU2A 90 72 H 1117 1145 1178 1248 1325 - - 1532 2123
extractor UKU2A 100 72 H 1144 1178 1206 1284 1368 - - 1584 2200
330
UKU2A 120 72 H 1227 1260 1295 1375 1463 - - 1696 2306
2 deep drawers
Base unit for retractable or hob-level UKU2A 90 72 1 H 1117 1145 1178 1248 1325 - - 1532 2123
extractor UKU2A 100 72 1 H 1144 1178 1206 1284 1368 - - 1584 2200
UKU2A 120 72 1 H 1227 1260 1295 1375 1463 - - 1696 2306
1 fixed panel
1 drawer
1 deep drawer
Corner sink base unit SPE 105 72 H 619 664 701 737 759 - - 884 1062
with 40 cm door
1 hinged door SPE 115 72 H 632 677 711 752 776 - - 916 1142
with 50 cm door
carcase width 1000 mm, without corner
infill panel SPE 125 72 H 647 689 724 774 801 - - 945 1224
with 60 cm door
Corner infill panel UEBE 65 72 H must be
ordered separately.
left version shown
Matching accessories:
Waste-disposal system ZA 401.
Sink base unit SP 45 72 H 423 466 501 538 561 - - 691 906
SP 50 72 H 437 481 515 556 580 - - 717 955
1 hinged door SP 60 72 H 463 505 541 590 616 - - 758 1047
Matching accessories:
Drip inserts EZIT .. A
Sink base unit SP 80 72 H 625 712 785 852 894 - - 1141 1533
SP 90 72 H 646 733 803 874 920 - - 1178 1622
2 hinged doors SP 100 72 H 666 756 822 898 946 - - 1218 1712
Matching accessories: SP 120 72 H 696 779 851 935 987 - - 1269 1872
Drip inserts EZIT .. A
Sink base unit SPA 45 72 H 395 437 471 507 530 - - 658 873
SPA 50 72 H 414 457 491 531 555 - - 692 931
1 door loose SPA 60 72 H 439 480 515 566 593 - - 732 1022
The anti-tilt device which is supplied automatically must be fitted for room divider versions. 10.39
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Sink base unit SPA 45 72 1 H 518 560 593 619 645 - - 779 1083
SPA 50 72 1 H 529 571 605 631 658 - - 793 1100
1 deep drawer SPA 60 72 1 H 543 586 621 648 675 - - 814 1129
450 mm deep
Matching accessories:
set of Servodrive accessories ZAZ 7
Sink base unit SP2A 60 72 H 887 930 961 1052 1084 - - 1318 1550
SP2A 80 72 H 1157 1180 1211 1337 1386 - - 1594 1945
2 deep drawers SP2A 90 72 H 1175 1197 1234 1365 1421 - - 1628 2006
Upper deep drawer with low back panel
350 mm deep SP2A 100 72 H 1199 1221 1253 1395 1454 - - 1681 2077
SP2A 120 72 H 1226 1247 1281 1437 1503 - - 1748 2189
The max. installation height for sinks incl.
waste in 40 mm worktops is as follows:
centred 322 mm
outside 230 mm
Matching accessories:
set of Servodrive accessories ZAZ 7
XXM waste separation systems ZA ..3 AG
fit bottom deep drawer.
Sink base unit with waste separation SPAMH 45 72 H 961 1000 1027 1060 1082 - - 1263 1458
and deep drawer with reduced depth SPAMH 50 72 H 1016 1054 1084 1121 1141 - - 1333 1540
SPAMH 60 72 H 1075 1111 1140 1190 1213 - - 1411 1667
1 deep drawer with waste separation
system
with reduced-depth deep drawer
400 mm deep for use with
low-lying service valves
or drains
1 cover shelf
waste separation system consisting of:
45 cm wide:
2 containers, 14 litres
50 cm wide:
2 containers 10 litres
1 container lid
1 container 14 litres
60 cm wide:
2 containers 10 litres
1 container lid
1 container 20 litres
10.40 The anti-tilt device which is supplied automatically must be fitted for room divider versions.
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Sink base unit with waste separation SPAISM 45 72 H 1195 1238 1274 1310 1334 - - 1466 1641
SPAISM 50 72 H 1256 1299 1334 1376 1400 - - 1542 1738
1 deep drawer with waste separation SPAISM 60 72 H 1322 1365 1400 1452 1479 - - 1625 1870
system XXL 500 mm deep
1 internal drawer
waste separation system consisting of:
45 cm wide:
1 container 12 litres
2 containers 8 litres each
1 container lid
2 containers 2.5 litres each
50 cm wide:
1 container 12 litres
2 containers 8 litres each
1 container lid
2 containers 2.5 litres each
60 cm wide:
1 container 18 litres
2 containers 8 litres each
1 container lid
3 containers 2.5 litres each
Sink base unit with waste separation SPAM 60 72 1 H 1252 1294 1330 1382 1410 - - 1556 1803
1 deep drawer with waste separation
system XXXL 500 mm deep
waste separation system consisting of:
2 containers 13 litres, 1 lid,
1 container 30 litres
The max. installation height for sinks incl.
waste in 40 mm worktops is as follows:
295 mm
Matching accessories:
set of Servodrive accessories ZAZ 7
Not available in ELITE finish.
Sink base unit with waste separation SPAM 60 72 3 H 1999 2041 2078 2131 2157 - - 2304 2517
1 deep drawer with waste separation
system
450 mm deep
waste separation system consisting of:
1 container 40 litres
1 organic waste pin, 6 litre, with lid
1 container, 1.2 litres
System storage lid
The 40 litre bin accommodates a 35 litre
waste bag (CH).
The anti-tilt device which is supplied automatically must be fitted for room divider versions. 10.41
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Front panel GSBV 45 72 H 158 203 238 282 306 - - 437 669
GSBV 60 72 H 171 215 251 303 329 - - 470 786
for fully integrated dishwashers
1 front panel
Front panel with distance frame GSBV 45 72 1 H 361 427 480 548 584 - - 831 1031
GSBV 60 72 1 H 368 430 483 560 599 - - 865 1148
for fully integrated dishwashers
1 front panel
With distance frame and fitted recessed
grip
Front panel FWI 60 72 H 171 215 251 303 329 - - 470 786
for fully integrated washing machines
1 front panel
Front panel FKI 60 72 H 192 235 271 322 350 - - 492 806
for fully integrated refrigerators and
freezers
1 front panel
Infill panel for base units UBF 15 72 H 115 124 133 141 148 - - 188 233
Finish in door material
fitted between wall and carcase
and for fitting next to appliances
10.42
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Corner infill panel for base units UEBF 65 72 H 190 195 232 283 299 - - 436 476
Finish in door material
for 90° corner solution
for planning dimensions 650 x 650 mm
Corner infill panel for base units UEBF 20 72 VH 220 271 306 332 363 - - 470 533
Side cladding RBS 72 H 512 547 577 613 930 - - 1144 1153
for mounting on the carcase side
50 mm wide
Finish in door material
600 mm deep
for carcase depth 560 mm
Side cladding RBS 72 RH 622 658 689 720 1095 - - 1344 1375
for mounting on the carcase side
50 mm wide
Finish in door material
for room divider and carcase depth
560 mm
Side cladding RBS 729 1 RH 666 711 746 781 1411 - - 1726 1769
for mounting on the carcase side
50 mm wide
Finish in door material
for room divider base unit 560 mm deep
and display unit 350 mm deep
Side cladding RBS 72 RV H 665 710 745 780 1409 - - 1726 1738
same as above, but
for room divider, variable depth from
100-1164 mm
Height- and depth-variable side RBS UV H 621 663 701 736 1203 - - 1454 1485
panelling
for mounting on the carcase side
50 mm wide
Finish in door material
Depth variable from 100 to 752 mm
Height variable from 100 to 753 mm
(753 mm for carcase height 780 mm and
688 mm for carcase height 715 mm)
Side cladding two-part RBS2 72 H 923 984 1046 1104 1570 - - 1914 1927
for mounting on the carcase side
50 mm wide
Finish in door material
600 mm deep
for carcase depth 560 mm
10.43
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Side cladding two-part RBS2 72 RH 1113 1175 1238 1288 1834 - - 2230 2239
for mounting on the carcase side
50 mm wide
Finish in door material
for room divider and carcase depth
560 mm
Side cladding two-part RBS2 72 RV H 1199 1281 1350 1408 2381 - - 2885 2904
same as above, but
for room divider, variable depth from
100-1164 mm
Side cladding two-part RBS2 729 1 RH 1201 1283 1353 1410 2385 - - 2885 2956
for mounting on the carcase side
50 mm wide
Finish in door material
for room divider base unit 560 mm deep
and display unit 350 mm deep
Side panelling depth adjustable two- RBS2 72 V H 1160 1237 1315 1387 1973 - - 2392 2408
part
for mounting on the carcase side
50 mm wide
Finish in door material
Depth variable from 100 to 752 mm
10.44
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Base unit UA 60 36 H 509 527 544 585 604 - - 702 817
UA 80 36 H 633 643 654 712 742 - - 827 1006
1 deep drawer UA 90 36 H 659 668 682 742 773 - - 856 1048
UA 100 36 H 679 689 703 766 801 - - 886 1087
UA 120 36 H 751 763 779 852 887 - - 975 1163
Infill panel for base units UBF 15 36 H 98 108 114 124 135 - - 173 218
Finish in door material
fitted between wall and carcase
Corner infill panel for base units UEBF 65 36 H 161 171 208 256 268 - - 395 438
Finish in door material
for 90° corner solution
for planning dimensions 650 x 650 mm
Corner infill panel for base units UEBF 20 36 VH 186 204 241 274 307 - - 401 490
Finish in door material
For variable planning dimensions
for 90° corner solution
Min. dimension 50 mm per side.
Max. 180 mm at the carcase front edge
per side.
Side cladding RBS 36 H 492 516 558 590 829 - - 982 987
for mounting on the carcase side
50 mm wide
Finish in door material
for carcase depth 560 mm
Side cladding RBS 36 RV H 611 618 647 704 1023 - - 1320 1326
for mounting on the carcase side
50 mm wide
Finish in door material
for room divider, variable depth from
100-1164 mm
The anti-tilt device which is supplied automatically must be fitted for room divider versions. 10.45
VETRINA
STRUCT
ART pro
GRAND
SATINA
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Surcharge for room divider version 1 MPRT 1 144 144 144 144 144 144 144 144 144
per unit
the unit is prepared to receive fixed back
panels
The rear carcase edge colour matches
the front carcase edge.
The room divider can be freely planned
and does not depend on the type of unit.
Back panel two-part RB2 30 72 H 362 398 474 526 584 - - 724 973
RB2 40 72 H 379 407 489 542 597 - - 741 1106
Finish in door material RB2 45 72 H 388 415 492 548 604 - - 754 1177
688 mm high (330+330 mm)
to be fitted to the back of free standing RB2 50 72 H 395 421 499 554 611 - - 767 1245
base units RB2 60 72 H 412 434 514 583 643 - - 793 1379
10.46 An anti-tilt device is needed for room divider versions. See section Accessories/Other accessories.
910 - 390 mm
Wall units
S78 S72
S78 S72
Information on ALNO wall units for built-in appliances
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit O 30 91 H 339 397 431 466 504 - - 624 778
O 40 91 H 354 412 451 481 519 - - 647 884
1 hinged door O 45 91 H 361 419 458 495 530 - - 671 937
2 adjustable shelves
O 50 91 H 357 412 448 489 524 - - 661 958
O 55 91 H 379 436 472 513 556 - - 705 1043
O 60 91 H 377 430 467 512 555 - - 699 1062
Wall unit with draining rack OT 60 91 H 780 837 875 920 966 - - 1113 1468
1 door with 155° hinges
1 draining rack
2 wire mesh shelves
1 removable drip tray
Wall unit with draining rack OT 90 91 H 1033 1150 1226 1296 1371 - - 1650 2164
2 doors with 155° opening angle
1 draining rack
2 wire mesh shelves
1 removable drip tray
Wall unit for spices OS 30 91 H 478 536 571 605 644 - - 764 958
OS 45 91 H 500 557 597 632 669 - - 810 1124
1 door with spice rack OS 50 91 H 510 566 604 646 682 - - 824 1183
1 adjustable shelf
1 fixed shelf OS 60 91 H 526 581 619 666 711 - - 859 1292
Wall unit with glass door OG 45 91 H 623 681 720 757 793 - - 933 1186
OG 50 91 H 629 687 726 763 799 - - 944 1215
1 glass door OG 60 91 H 640 693 729 774 817 - - 961 1311
2 adjustable glass shelves
For glass choices refer to
section Glass types
10.47
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit with segment door OGS 45 91 H 390 522 584 645 755 - - 987 1014
OGS 50 91 H 398 536 602 670 776 - - 1015 1039
1 segment hinged door OGS 60 91 H 415 562 636 707 824 - - 1076 1090
2 adjustable glass shelves
For glass choices refer to
section Glass types
Wall unit with glass door OGN 45 91 H 847 847 847 847 847 - - 847 847
OGN 50 91 H 870 870 870 870 870 - - 870 870
in neutral glass front No. 535 and No. 538 OGN 60 91 H 928 928 928 928 928 - - 928 928
1 glass door
2 adjustable glass shelves
Corner wall unit OE 60 91 H 809 922 997 1063 1139 - - 1380 1685
OE 65 91 H 836 950 1020 1088 1163 - - 1406 1707
2 doors with 155° opening angle
2 adjustable shelves
Wall unit for vapour extractors OD 60 91 H 564 619 657 704 749 - - 897 1264
1 hinged door
up to 5 shelves (approx. 100 mm deep)
Unit interior layout depends on the
appliance.
With mechanical opening assistance
Tip-On.
Wall unit for vapour extractors OD 90 91 H 731 847 925 998 1070 - - 1352 1883
2 hinged doors
up to 5 shelves (approx. 100 mm deep)
Unit interior layout depends on the
appliance.
With mechanical opening assistance
Tip-On.
10.48
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit for microwave OMK 60 91 H 502 537 573 609 644 - - 777 1149
niche height 334 - 365 mm
1 hinged door with Tip-On fitting
1 adjustable shelf
Infill panel for wall units OBF 15 91 H 199 208 219 227 238 - - 287 354
Finish in door material
fitted between wall and carcase
Corner infill panel for wall units OEBF 20 91 VH 403 414 422 430 441 - - 508 640
Finish in door material
For variable planning dimensions
for 90° corner solution
min. dimension 50 mm per side.
max. 180 mm on carcase front edge per
leg
Side cladding RBS 91 3 1 H 528 550 569 591 816 - - 970 1031
50 mm wide
Finish in door material
for mounting on the carcase side
for carcase depth 350 mm
10.49
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit O 30 78 H 330 376 415 436 456 - - 596 732
O 40 78 H 348 394 431 452 474 - - 614 824
1 hinged door O 45 78 H 355 401 437 458 482 - - 628 869
2 adjustable shelves
O 50 78 H 357 404 439 459 485 - - 629 903
O 55 78 H 371 416 454 481 506 - - 655 960
O 60 78 H 377 420 457 483 511 - - 653 993
Wall unit with draining rack OT 60 78 H 752 796 832 861 889 - - 1033 1360
1 door with 155° hinges
1 draining rack
2 wire mesh shelves
1 removable drip tray
Wall unit with draining rack OT 90 78 H 997 1085 1158 1200 1248 - - 1535 2009
2 doors with 155° opening angle
1 draining rack
2 wire mesh shelves
1 removable drip tray
Wall unit for spices OS 30 78 H 461 507 546 566 587 - - 726 902
OS 45 78 H 480 526 562 583 608 - - 753 1039
1 door with spice rack OS 50 78 H 490 537 572 594 619 - - 766 1092
1 adjustable shelf
1 fixed shelf OS 60 78 H 511 555 593 619 647 - - 792 1191
Wall unit with glass door OG 45 78 H 612 658 694 715 740 - - 885 1114
OG 50 78 H 614 661 696 716 742 - - 886 1148
1 glass door OG 60 78 H 634 677 714 741 768 - - 910 1237
2 adjustable glass shelves
For glass choices refer to
section Glass types
10.50
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit with segment door OGS 45 78 H 386 514 575 625 676 - - 955 980
OGS 50 78 H 392 524 592 643 691 - - 979 1006
1 segment hinged door OGS 60 78 H 409 552 627 676 741 - - 1036 1053
2 adjustable glass shelves
For glass choices refer to
section Glass types
Wall unit with glass door OGN 45 78 H 757 757 757 757 757 - - 757 757
OGN 50 78 H 782 782 782 782 782 - - 782 782
in neutral glass front No. 535 and No. 538 OGN 60 78 H 833 833 833 833 833 - - 833 833
1 glass door
2 adjustable glass shelves
Wall unit OGMLN 45 78 H 1007 1028 1044 1061 1077 - - 1185 1319
OGMLN 50 78 H 1029 1050 1066 1084 1100 - - 1210 1347
1 combined upward folding door with OGMLN 60 78 H 1065 1087 1104 1122 1139 - - 1253 1395
cushioned closing:
at top - furniture part, OGMLN 80 78 H 1394 1406 1422 1450 1476 - - 1577 1782
at bottom - glass part in neutral glass OGMLN 90 78 H 1463 1474 1493 1520 1548 - - 1641 1882
front No. 535 and No. 538 OGMLN 100 78 H 1518 1530 1546 1577 1608 - - 1705 1970
2 adjustable glass shelves
Only possible in combination with
MP LED K.. or MP LED BO..
10.51
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit OGLN 45 78 H 1356 1356 1356 1356 1356 - - 1356 1356
OGLN 50 78 H 1385 1385 1385 1385 1385 - - 1385 1385
in neutral glass front No. 535 and No. 538 OGLN 60 78 H 1434 1434 1434 1434 1434 - - 1434 1434
1 glass upward-folding door with
cushioned closing OGLN 80 78 H 1873 1873 1873 1873 1873 - - 1873 1873
2 adjustable glass shelves OGLN 90 78 H 1960 1960 1960 1960 1960 - - 1960 1960
OGLN 100 78 H 2004 2004 2004 2004 2004 - - 2004 2004
Only possible in combination with
MP LED K.. or MP LED BO..
Wall unit OSL 45 78 H 707 752 783 812 855 - - 1070 1333
OSL 50 78 H 721 762 792 826 868 - - 1093 1377
1 lift-up door with Softlift fitting OSL 60 78 H 743 788 819 858 892 - - 1118 1474
1 adjustable shelf
OSL 80 78 H 967 991 1023 1081 - - - 1332 1835
Custom designs not possible. OSL 90 78 H 1016 1040 1078 1132 - - - 1375 1951
Do not plan any elements above this unit! OSL 100 78 H 1066 1090 1123 1184 - - - 1441 2068
Minimum distance between unit top edge
and ceiling: 150 mm.
Wall unit OGSLN 45 78 H 1390 1390 1390 1390 1390 - - 1390 1390
OGSLN 50 78 H 1419 1419 1419 1419 1419 - - 1419 1419
in neutral glass front No. 535 and No. 538 OGSLN 60 78 H 1440 1440 1440 1440 1440 - - 1440 1440
1 glass lift-up door with Softlift fitting
1 adjustable glass shelf
Corner wall unit OE 60 78 H 793 886 960 1000 1047 - - 1328 1587
OE 65 78 H 818 911 986 1028 1071 - - 1346 1617
2 doors with 155° opening angle
2 adjustable shelves
10.52
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit for vapour extractors OD 60 78 H 519 563 600 626 655 - - 800 1139
1 hinged door
up to 4 shelves (approx. 100 mm deep)
Unit interior layout depends on the
appliance.
With mechanical opening assistance
Tip-On.
Wall unit for vapour extractors OD 90 78 H 701 792 864 907 956 - - 1246 1730
2 hinged doors
up to 4 shelves (approx. 100 mm deep)
Unit interior layout depends on the
appliance.
With mechanical opening assistance
Tip-On.
Wall unit for microwave OMK 60 78 H 454 479 502 529 560 - - 705 1005
niche height 334 - 365 mm
1 flap door with Tip-On
Infill panel for wall units OBF 15 78 H 191 199 208 219 227 - - 276 340
Finish in door material
fitted between wall and carcase
Corner infill panel for wall units OEBF 20 78 VH 383 390 400 409 419 - - 482 611
Finish in door material
For variable planning dimensions
for 90° corner solution
min. dimension 50 mm per side.
max. 180 mm on carcase front edge per
leg
10.53
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Side cladding RBS 78 3 1 H 514 532 555 573 762 - - 904 967
50 mm wide
Finish in door material
for mounting on the carcase side
for carcase depth 350 mm
10.54
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit O 30 65 H 306 325 358 384 411 - - 516 667
O 40 65 H 323 345 377 406 436 - - 529 745
1 hinged door O 45 65 H 332 354 385 412 447 - - 543 782
1 adjustable shelf
O 50 65 H 335 355 387 416 448 - - 552 805
O 55 65 H 346 366 401 428 463 - - 575 857
O 60 65 H 349 369 405 436 466 - - 585 878
Wall unit with draining rack OT 60 65 H 684 707 743 772 803 - - 924 1207
1 door with 155° hinges
1 draining rack
1 storage rack
1 removable drip tray
Wall unit with draining rack OT 90 65 H 922 962 1024 1081 1151 - - 1342 1805
2 doors with 155° opening angle
1 draining rack
1 storage rack
1 removable drip tray
Wall unit for spices OS 30 65 H 416 436 468 494 522 - - 626 812
OS 45 65 H 434 456 487 514 549 - - 645 925
1 door with spice rack OS 50 65 H 441 462 494 524 556 - - 661 961
1 fixed shelf
OS 60 65 H 457 478 514 546 576 - - 698 1043
Wall unit with glass door OG 45 65 H 583 606 636 664 699 - - 795 1021
OG 50 65 H 587 607 639 668 700 - - 804 1043
1 glass door OG 60 65 H 601 621 657 687 718 - - 837 1117
1 adjustable glass shelf
For glass choices refer to
section Glass types
10.55
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit with segment door OGS 45 65 H 354 428 470 545 632 - - 876 898
OGS 50 65 H 363 440 492 566 653 - - 912 931
1 segment hinged door OGS 60 65 H 378 466 516 591 696 - - 956 968
1 adjustable glass shelf
For glass choices refer to
section Glass types
Wall unit with glass door OGN 45 65 H 694 694 694 694 694 - - 694 694
OGN 50 65 H 716 716 716 716 716 - - 716 716
in neutral glass front No. 535 and No. 538 OGN 60 65 H 761 761 761 761 761 - - 761 761
1 glass door
1 adjustable glass shelf
Wall unit OGMLN 60 65 H 1031 1050 1066 1084 1104 - - 1203 1322
OGMLN 80 65 H 1359 1369 1380 1411 1440 - - 1527 1705
1 combined upward folding door with OGMLN 90 65 H 1424 1434 1448 1475 1508 - - 1591 1785
cushioned closing:
at top - furniture part, OGMLN 100 65 H 1477 1487 1500 1530 1565 - - 1651 1854
at bottom - glass part in neutral glass
front No. 535 and No. 538
1 adjustable glass shelf
10.56
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit OGLN 45 65 H 1307 1307 1307 1307 1307 - - 1307 1307
OGLN 50 65 H 1335 1335 1335 1335 1335 - - 1335 1335
in neutral glass front No. 535 and No. 538 OGLN 60 65 H 1382 1382 1382 1382 1382 - - 1382 1382
1 glass upward-folding door with
cushioned closing OGLN 80 65 H 1830 1830 1830 1830 1830 - - 1830 1830
1 adjustable glass shelf OGLN 90 65 H 1913 1913 1913 1913 1913 - - 1913 1913
OGLN 100 65 H 1975 1975 1975 1975 1975 - - 1975 1975
Only possible in combination with
MP LED K.. or MP LED BO..
Wall unit OSL 45 65 H 644 664 696 725 758 - - 854 1078
OSL 50 65 H 651 670 703 733 765 - - 871 1113
1 lift-up door with Softlift fitting OSL 60 65 H 662 681 717 750 781 - - 902 1185
1 adjustable shelf
OSL 80 65 H 672 726 762 804 850 - - 1012 1289
Custom designs not possible. Do not plan OSL 90 65 H 678 742 777 826 884 - - 1049 1325
any elements above this unit! OSL 100 65 H 1033 1052 1080 1138 - - - 1380 1885
Minimum distance between unit top edge
and ceiling: 180 mm.
Wall unit OGSLN 45 65 H 853 853 853 853 853 - - 853 853
OGSLN 50 65 H 865 865 865 865 865 - - 865 865
in neutral glass front No. 535 and No. 538 OGSLN 60 65 H 879 879 879 879 879 - - 879 879
1 glass lift-up door with Softlift fitting
1 adjustable glass shelf OGSLN 80 65 H 956 956 956 956 956 - - 956 956
OGSLN 90 65 H 983 983 983 983 983 - - 983 983
Only possible in combination with
MP LED K.. or MP LED BO..
Corner wall unit OE 60 65 H 698 743 809 858 914 - - 1127 1420
OE 65 65 H 725 765 831 882 936 - - 1142 1441
2 doors with 155° opening angle
1 adjustable shelf
10.57
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit for microwave OMK 60 65 H 422 442 463 489 522 - - 639 890
niche height 334 - 365 mm
1 flap door with Tip-On
Wall unit for vapour extractors OD 60 65 H 493 514 550 581 612 - - 733 1025
1 hinged door
up to 3 shelves (approx. 100 mm deep)
Unit interior layout depends on the
appliance.
With mechanical opening assistance
Tip-On.
Wall unit for vapour extractors OD 90 65 H 649 694 756 811 879 - - 1071 1551
2 hinged doors
up to 3 shelves (approx. 100 mm deep)
Unit interior layout depends on the
appliance.
With mechanical opening assistance
Tip-On.
Not to be planned at the end of a run.
If this is unavoidable a side panel needs
to be ordered separately.
Infill panel for wall units OBF 15 65 H 142 152 159 169 181 - - 223 307
Finish in door material
fitted between wall and carcase
Corner infill panel for wall units OEBF 20 65 VH 301 312 321 328 339 - - 395 564
Finish in door material
For variable planning dimensions
for 90° corner solution
min. dimension 50 mm per side.
max. 180 mm on carcase front edge per
leg
10.58
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Side cladding RBS 65 3 1 H 496 514 528 545 709 - - 840 905
50 mm wide
Finish in door material
for mounting on the carcase side
for carcase depth 350 mm
10.59
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit O 30 52 H 303 330 338 362 393 - - 476 623
O 40 52 H 320 348 364 390 409 - - 511 689
1 hinged door O 45 52 H 328 358 376 402 422 - - 524 717
1 adjustable shelf
O 50 52 H 330 361 386 408 431 - - 529 740
O 60 52 H 345 372 405 430 453 - - 553 799
Wall unit OKS 30 52 H 403 431 438 462 493 - - 577 720
OKS 40 52 H 456 484 501 528 545 - - 648 820
520 mm high OKS 45 52 H 468 498 516 541 562 - - 664 850
1 flap door with cushioned closing
OKS 50 52 H 476 506 531 552 577 - - 680 883
Minimum distance between unit top edge OKS 60 52 H 492 524 554 578 603 - - 704 946
and ceiling: 130 mm. OKS 80 52 H 605 634 654 697 - - - 824 1180
Unit in 800, 900 and 1000 mm width not OKS 90 52 H 624 656 676 723 - - - 837 1236
available for ALNOSTAR SIGN. OKS 100 52 H 641 674 705 746 - - - 856 1308
Wall unit OGMLN 45 65 H 975 993 1008 1025 1044 - - 1138 1250
OGMLN 50 65 H 996 1014 1030 1047 1066 - - 1162 1277
1 combined upward folding door with OGMLN 60 52 H 996 1012 1026 1043 1065 - - 1150 1246
cushioned closing:
at top - furniture part, OGMLN 80 52 H 1320 1328 1335 1366 1399 - - 1476 1625
at bottom - glass part in neutral glass OGMLN 90 52 H 1384 1392 1400 1429 1464 - - 1540 1687
front No. 535 and No. 538 OGMLN 100 52 H 1437 1446 1455 1483 1521 - - 1596 1740
1 adjustable glass shelf
10.60
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit OGLN 60 52 H 1355 1355 1355 1355 1355 - - 1355 1355
OGLN 80 52 H 1782 1782 1782 1782 1782 - - 1782 1782
in neutral glass front No. 535 and No. 538 OGLN 90 52 H 1863 1863 1863 1863 1863 - - 1863 1863
1 glass upward-folding door with
cushioned closing OGLN 100 52 H 1908 1908 1908 1908 1908 - - 1908 1908
1 adjustable glass shelf
Wall unit OSL 45 52 H 609 639 658 682 705 - - 805 985
OSL 50 52 H 617 648 673 695 720 - - 820 1018
1 lift-up door with Softlift fitting OSL 60 52 H 636 663 696 723 747 - - 848 1082
1 adjustable shelf
OSL 80 52 H 908 925 940 1000 - - - 1221 1607
Custom designs not possible. Do not plan OSL 90 52 H 958 973 990 1048 - - - 1269 1654
any elements above this unit! OSL 100 52 H 1000 1019 1036 1092 - - - 1319 1702
Minimum distance between unit top edge
and ceiling: 180 mm.
Wall unit for vapour extractors OD 60 52 H 413 443 475 501 524 - - 625 873
1 hinged door
up to 2 shelves (approx. 100 mm deep)
Unit interior layout depends on the
appliance.
With mechanical opening assistance
Tip-On.
Wall unit for vapour extractors OD 90 52 H 529 590 625 677 717 - - 922 1314
2 hinged doors
up to 2 shelves (approx. 100 mm deep)
Unit interior layout depends on the
appliance.
With mechanical opening assistance
Tip-On.
10.61
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Infill panel for wall units OBF 15 52 H 134 142 152 159 170 - - 214 290
520 mm high
Finish in door material
fitted between wall and carcase
Side cladding RBS 52 3 1 H 481 496 514 528 697 - - 821 842
520 mm high
50 mm wide
Finish in door material
for mounting on the carcase side
for carcase depth 350 mm
10.62
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit O 30 39 H 279 302 316 333 352 - - 441 542
O 40 39 H 297 315 332 350 371 - - 468 592
1 hinged door O 45 39 H 304 324 341 356 376 - - 482 616
O 50 39 H 308 326 344 359 381 - - 491 631
O 60 39 H 320 340 358 375 394 - - 505 679
Wall unit OKS 30 39 H 402 424 440 455 474 - - 563 658
OKS 40 39 H 420 440 455 473 495 - - 592 709
1 flap door with cushioned closing OKS 45 39 H 430 451 468 482 503 - - 610 737
1200 mm width with middle post OKS 50 39 H 440 458 475 492 514 - - 624 762
OKS 60 39 H 455 475 494 512 529 - - 643 814
Minimum distance between unit top edge OKS 80 39 H 549 563 577 608 632 - - 731 978
and ceiling: 130 mm. OKS 90 39 H 567 578 597 622 653 - - 745 1028
OKS 100 39 H 583 594 611 640 671 - - 769 1079
OKS 120 39 H 634 648 668 697 730 - - 835 1139
Wall unit OGKSN 45 39 H 768 768 768 768 768 - - 768 768
OGKSN 50 39 H 784 784 784 784 784 - - 784 784
in neutral glass front No. 535 and No. 538 OGKSN 60 39 H 810 810 810 810 810 - - 810 810
1 glass flap door with cushioned closing
OGKSN 80 39 H 917 917 917 917 917 - - 917 917
Only possible in combination with OGKSN 90 39 H 927 927 927 927 927 - - 927 927
MP LED K.. or MP LED BO.. OGKSN 100 39 H 950 950 950 950 950 - - 950 950
Wall unit OSL 45 39 H 588 610 624 640 661 - - 768 886
OSL 50 39 H 598 618 633 650 671 - - 783 913
1 lift-up door with Softlift fitting OSL 60 39 H 613 635 651 670 687 - - 801 965
1200 mm width with middle post
OSL 80 39 H 709 720 736 765 791 - - 891 1130
Custom designs not possible. OSL 90 39 H 723 734 754 780 809 - - 902 1177
Do not plan any elements above this unit! OSL 100 39 H 760 771 791 817 846 - - 939 1216
Minimum distance between unit top edge OSL 120 39 H 792 806 827 854 889 - - 992 1289
and ceiling: 180 mm. Servodrive assisted
opening is available for upward lifting
door at MPS SERVO HL surcharge. Order
separately for Servodrive ZLZ 100. We
recommend ZG 1 to make closing easier.
10.63
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Wall unit OGSLN 45 39 H 953 953 953 953 953 - - 953 953
OGSLN 50 39 H 961 961 961 961 961 - - 961 961
in neutral glass front No. 535 and No. 538 OGSLN 60 39 H 1003 1003 1003 1003 1003 - - 1003 1003
1 glass lift-up door with Softlift fitting
OGSLN 80 39 H 1194 1194 1194 1194 1194 - - 1194 1194
Only possible in combination with OGSLN 90 39 H 1237 1237 1237 1237 1237 - - 1237 1237
MP LED K.. or MP LED BO.. OGSLN 100 39 H 1276 1276 1276 1276 1276 - - 1276 1276
Parallel lift-up unit OHL 45 39 H 588 610 624 640 661 - - 768 886
OHL 50 39 H 598 618 633 650 671 - - 783 913
1 Parallel lift-up door OHL 60 39 H 613 635 651 670 687 - - 801 965
1200 mm width with middle post
OHL 80 39 H 709 720 736 765 791 - - 891 1130
Minimum distance between unit top edge OHL 90 39 H 723 734 754 780 809 - - 902 1177
and ceiling: 330 mm. OHL 100 39 H 760 771 791 817 846 - - 939 1216
Custom designs not possible. Do not plan OHL 120 39 H 792 806 827 854 889 - - 992 1289
any elements above this unit! Servodrive
assisted opening is available for upward
lifting door at MPS SERVO HL surcharge.
Order separately for Servodrive ZLZ 100.
Parallel lift-up unit OGHSLN 45 39 H 953 953 953 953 953 - - 953 953
OGHSLN 50 39 H 961 961 961 961 961 - - 961 961
1 Parallel lift-up door OGHSLN 60 39 H 1003 1003 1003 1003 1003 - - 1003 1003
Unit interior in visible side colours carcase OGHSLN 80 39 H 1194 1194 1194 1194 1194 - - 1194 1194
finish. Custom designs not possible. Do OGHSLN 90 39 H 1237 1237 1237 1237 1237 - - 1237 1237
not plan any elements above this unit! OGHSLN 100 39 H 1276 1276 1276 1276 1276 - - 1276 1276
Minimum distance between unit top edge
and ceiling: 330 mm. Servodrive assisted
opening is available for upward lifting
door at MPS SERVO HL surcharge. Order
separately for Servodrive ZLZ 100.
Infill panel for wall units OBF 15 39 H 113 123 135 141 152 - - 192 246
Finish in door material
fitted between wall and carcase
Range of adjustment: 80 to 100 mm.
10.64
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 350 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
1 2 3 4 5 6 7 8 9 10
Side cladding RBS 39 3 1 H 463 475 488 499 681 - - 798 817
50 mm wide
Finish in door material
for mounting on the carcase side
for carcase depth 350 mm
10.65
10.66
horizontal
Tall units
S78
S78
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Tall unit S 30 221 H 1031 1165 1243 1353 1440 - - 1831 2132
S 45 221 H 1100 1235 1314 1438 1542 - - 1947 2438
1 flap door with Tip-On S 50 221 H 1119 1256 1343 1468 1572 - - 1995 2561
1 hinged door
3 adjustable shelves S 60 221 H 1179 1304 1394 1527 1640 - - 2092 2843
1 fixed shelf
1 hinged door
2 adjustable shelves
Tall unit for provisions S2A 60 221 H 1496 1621 1711 1844 1957 - - 2409 3160
1 flap door with Tip-On
1 hinged door
3 adjustable shelves
1 fixed shelf
2 deep drawers
Tall unit for provisions SIA 30 221 H 1950 2083 2162 2271 2358 - - 2749 3006
SIA 45 221 H 2010 2145 2224 2348 2452 - - 2857 3304
1 flap door with Tip-On SIA 50 221 H 2033 2170 2257 2382 2486 - - 2909 3431
2 hinged doors
1 adjustable shelf SIA 60 221 H 2091 2215 2306 2439 2553 - - 3005 3712
2 fixed shelves
5 interior deep drawers
ELITE 4 interior deep drawers
Tall unit for built-in appliance SU 88 221 H 1149 1273 1364 1496 1610 - - 2061 2803
Niche height 878 mm
1 flap door with Tip-On
1 hinged appliance door
878 1 fixed shelf
1 hinged door
2 adjustable shelves
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.67
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 88 ISIA 221 H 1801 1925 2016 2148 2262 - - 2713 3455
Niche height 878 mm
1 flap door with Tip-On
2 fixed shelves
878 1 appliance door
1 hinged door
1 internal drawer
2 interior deep drawers
Tall unit for built-in appliance SU 88 2A 221 H 1382 1508 1593 1770 1890 - - 2421 3146
Niche height 878 mm
1 flap door with Tip-On
1 hinged appliance door
1 fixed shelf
2 deep drawers
Tall unit for built-in appliance SU 102 221 H 1149 1273 1364 1496 1610 - - 2061 2817
Niche height 1025 mm
1 flap door with Tip-On
1 hinged appliance door
1 fixed shelf
1 hinged door
2 adjustable shelves
Tall unit for built-in appliance SU 102 2A 221 H 1382 1508 1593 1770 1890 - - 2421 3160
Niche height 1025 mm
1 flap door with Tip-On
1 hinged appliance door
1 fixed shelf
2 deep drawers
10.68 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 88 72 221 H 1113 1237 1328 1460 1574 - - 2026 2770
Niche height
upper 878 mm
lower 716 mm
1 flap door with Tip-On
2 hinged appliance doors
1 fixed shelf
Tall unit for built-in appliance SU 102 72 221 H 1113 1237 1328 1460 1574 - - 2026 2782
Niche height
upper 1025 mm
lower 716 mm
1 flap door with Tip-On
2 hinged appliance doors
1 fixed shelf
Tall unit for built-in appliance SUB 221 2 H 1073 1170 1253 1356 1434 - - 1784 2674
niche height 595 mm
1 hinged door
2 adjustable shelves
1 open niche
1 hinged door
2 adjustable shelves
Tall unit for appliances SUB ISIA 221 2 H 1725 1822 1905 2008 2086 - - 2436 3326
niche height 585 - 595 mm
1 hinged door
1 adjustable shelf
1 open niche
1 hinged door
1 internal drawer
2 interior deep drawers
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.69
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SUB 2A 221 1 H 1355 1452 1530 1678 1762 - - 2193 3061
niche height 595 mm
1 hinged door
2 adjustable shelves
1 open niche
2 deep drawers
Tall unit for built-in appliance SUM S2A 221 H 1512 1609 1693 1845 1953 - - 2426 3265
Niche height 450 mm
1 hinged door
2 adjustable shelves
1 open niche
1 drawer
2 deep drawers
Tall unit for appliances SUMKB A 221 H 1196 1277 1343 1448 1528 - - 1878 2721
Niche height
upper 334 - 365 mm
lower 595 mm
1 hinged door
2 adjustable shelves
2 open niches
1 deep drawer
Tall unit for appliances SUMB A 221 H 1171 1230 1294 1405 1486 - - 1814 2610
Niche height
upper 380 - 450 mm
lower 595 mm
1 hinged door
1 adjustable shelf
2 open niches
1 deep drawer
10.70 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Infill panel for tall units SBF 15 221 H 231 248 267 285 305 - - 389 461
Finish in door material
split above 780 mm
fitted between wall and carcase
Corner infill panel for tall units SEBF 20 221 VH 451 470 487 506 526 - - 627 780
Finish in door material
split above 780 mm
For variable planning dimensions
for 90° corner solution
Min. dimension 50 mm per side.
Max. 180 mm at the carcase front edge
per side.
Side cladding RBS 221 H 783 863 936 1017 1928 - - 2273 2326
Finish in door material
split above 780 mm for the following
ranges: Fronts with horizontal graining in
ALNOSTAR PLAN.
for mounting on the carcase side
50 mm wide
for carcase depth 560 mm
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.71
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Tall unit S 30 208 H 896 1008 1083 1168 1250 - - 1587 1911
S 45 208 H 950 1064 1140 1242 1335 - - 1715 2279
2 hinged doors S 50 208 H 966 1080 1156 1269 1372 - - 1757 2399
1 fixed shelf
5 adjustable shelves S 60 208 H 1014 1126 1203 1321 1444 - - 1851 2646
Tall unit for provisions S2A 60 208 H 1331 1443 1520 1638 1761 1910 - 2168 2963
1 hinged door
1 fixed shelf
3 adjustable shelves
2 deep drawers
Tall unit for provisions SIA 30 208 H 1815 1927 2002 2086 2169 - - 2506 2786
SIA 45 208 H 1858 1973 2049 2151 2245 - - 2623 3144
2 hinged doors SIA 50 208 H 1876 1991 2067 2179 2282 - - 2668 3265
1 fixed shelf
5 interior deep drawers SIA 60 208 H 1925 2037 2113 2232 2355 - - 2762 3513
Tall unit for built-in appliance SU 88 208 H 962 1075 1152 1270 1393 - - 1800 2592
Niche height 878 mm
1 hinged appliance door
1 fixed shelf
1 hinged door
2 adjustable shelves
Tall unit for built-in appliance SU 88 ISIA 208 H 1614 1727 1804 1922 2045 - - 2452 3244
Niche height 878 mm
1 hinged appliance door
1 fixed shelf
1 hinged door
1 internal drawer
2 interior deep drawers
10.72 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill:
200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 88 2A 208 H 1279 1393 1465 1627 1756 1966 - 2245 3012
Niche height 878 mm
1 hinged appliance door
1 fixed shelf
2 deep drawers
Tall unit for built-in appliance SU 102 208 H 962 1075 1152 1270 1393 - - 1800 2607
Niche height 1025 mm
1 hinged appliance door
1 fixed shelf
1 hinged door
2 adjustable shelves
Tall unit for built-in appliance SU 102 2A 208 H 1279 1393 1465 1627 1756 1966 - 2245 3026
Niche height 1025 mm
1 hinged appliance door
1 fixed shelf
2 deep drawers
Tall unit for built-in appliance SU 122 208 H 947 1059 1135 1254 1377 - - 1784 2591
Niche height 1225 mm
1 hinged appliance door
1 hinged door
2 adjustable shelves
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill: 10.73
200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 122 2A 208 H 1263 1377 1448 1611 1741 1949 - 2229 3008
Niche height 1225 mm
1 hinged appliance door
2 deep drawers
Tall unit for built-in appliance SU 88 72 208 H 918 1030 1107 1225 1348 - - 1755 2550
Niche height
upper 878 mm
lower 716 mm
2 hinged appliance doors
1 fixed shelf
Tall unit for built-in appliance SU 102 72 208 H 918 1030 1107 1225 1348 - - 1755 2566
Niche height
upper 1025 mm
lower 716 mm
2 hinged appliance doors
1 fixed shelf
Tall unit for built-in appliance SUB 208 2 H 1029 1105 1186 1295 1377 - - 1706 2557
niche height 595 mm
1 hinged door
1 adjustable shelf
1 open niche
1 hinged door
2 adjustable shelves
10.74 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill:
200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SUB ISIA 208 2 H 1681 1757 1838 1947 2029 - - 2358 3209
niche height 595 mm
1 hinged door
1 adjustable shelf
1 open niche
1 hinged door
1 internal drawer
2 interior deep drawers
Tall unit for built-in appliance SUB 2A 208 1 H 1334 1411 1487 1641 1729 1945 - 2140 2966
niche height 595 mm
1 hinged door
1 adjustable shelf
1 open niche
2 deep drawers
Tall unit for built-in appliance SUM S2A 208 H 1501 1577 1661 1819 1930 - - 2383 3179
Niche height 450 mm
1 hinged door
1 adjustable shelf
1 open niche
1 drawer
2 deep drawers
Tall unit for appliances SUMKB A 208 H 1162 1222 1286 1397 1480 1661 - 1809 2614
Niche height
upper 334 - 365 mm
lower 595 mm
1 hinged door
1 adjustable shelf
2 open niches
1 deep drawer
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill: 10.75
200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SUMB A 208 H 1124 1189 1251 1357 1432 1622 - 1742 2497
Niche height
upper 380 - 450 mm
lower 595 mm
1 hinged door
1 adjustable shelf
2 open niches
1 deep drawer
Infill panel for tall units SBF 15 208 H 219 237 255 275 294 - - 377 444
Finish in door material
split above 780 mm
fitted between wall and carcase
Corner infill panel for tall units SEBF 20 208 VH 430 451 470 487 506 - - 607 751
Finish in door material
split above 780 mm
For variable planning dimensions
for 90° corner solution
Min. dimension 50 mm per side.
Max. 180 mm at the carcase front edge
per side.
Side cladding RBS 208 H 769 846 918 992 1854 - - 2182 2211
Finish in door material
split above 780 mm for the following
ranges: Fronts with horizontal graining in
ALNOSTAR PLAN.
for mounting on the carcase side
50 mm wide
for carcase depth 560 mm
10.76 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill:
200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Tall unit S 30 195 H 823 939 1005 1099 1166 - - 1485 1678
S 45 195 H 878 996 1062 1169 1253 - - 1588 1970
1 hinged door S 50 195 H 891 1009 1080 1193 1276 - - 1615 2052
3 adjustable shelves
1 hinged door S 60 195 H 945 1056 1130 1247 1340 - - 1711 2336
2 adjustable shelves
Tall unit for provisions S2A 60 195 H 1262 1373 1447 1564 1657 1794 - 2028 2653
1 hinged door
3 adjustable shelves
1 fixed shelf
2 deep drawers
Tall unit for provisions SIA 30 195 H 1786 1902 1969 2061 2129 - - 2449 2594
SIA 45 195 H 1836 1953 2021 2127 2210 - - 2547 2880
2 hinged doors SIA 50 195 H 1851 1970 2041 2153 2236 - - 2574 2966
1 adjustable shelf
5 interior deep drawers SIA 60 195 H 1902 2013 2088 2205 2298 - - 2669 3247
Tall unit for built-in appliance SU 88 195 H 944 1055 1129 1246 1339 - - 1710 2323
Niche height 878 mm
1 hinged appliance door
1 fixed shelf
1 hinged door
2 adjustable shelves
Tall unit for built-in appliance SU 88 ISIA 195 H 1596 1707 1781 1898 1991 - - 2362 2975
Niche height 878 mm
1 hinged appliance door
1 fixed shelf
1 hinged door
1 internal drawer
2 interior deep drawers
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill: 10.77
200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 88 2A 195 H 1260 1373 1442 1603 1702 1899 - 2154 2741
Niche height 878 mm
1 hinged appliance door
1 fixed shelf
2 deep drawers
Tall unit for built-in appliance SU 102 195 H 944 1055 1129 1246 1339 - - 1710 2335
Niche height 1025 mm
1 hinged appliance door
1 fixed shelf
1 hinged door
2 adjustable shelves
Tall unit for built-in appliance SU 102 2A 195 H 1260 1373 1442 1603 1702 1899 - 2154 2755
Niche height 1025 mm
1 hinged appliance door
1 fixed shelf
2 deep drawers
Tall unit for built-in appliance SU 88 72 195 H 900 1011 1085 1203 1295 - - 1667 2282
Niche height
upper 878 mm
lower 716 mm
2 hinged appliance doors
1 fixed shelf
10.78 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill:
200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 102 72 195 H 900 1011 1085 1203 1295 - - 1667 2293
Niche height
upper 1025 mm
lower 716 mm
2 hinged appliance doors
1 fixed shelf
Tall unit for built-in appliance SUB 195 2 H 975 1056 1134 1239 1313 - - 1623 2430
niche height 595 mm
1 hinged door
1 adjustable shelf
1 open niche
1 hinged door
2 adjustable shelves
The aperture size may be adjusted with
infill panel in door material.
Tall unit for built-in appliance SUB ISIA 195 2 H 1627 1708 1786 1891 1965 - - 2275 3082
niche height 595 mm
1 hinged door
1 adjustable shelf
1 open niche
1 hinged door
1 internal drawer
2 interior deep drawers
Tall unit for built-in appliance SUB 2A 195 H 1292 1374 1447 1596 1677 1901 - 2068 2849
niche height 595 mm
1 hinged door
1 adjustable shelf
1 open niche
2 deep drawers
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill: 10.79
200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SUM S2A 195 H 1474 1557 1637 1790 1894 - - 2327 3076
Niche height 450 mm
1 hinged door
1 adjustable shelf
1 open niche
1 drawer
2 deep drawers
Tall unit for appliances SUMKB A 195 H 1110 1175 1236 1343 1419 1608 - 1728 2483
Niche height
upper 334 - 365 mm
lower 595 mm
1 hinged door
1 adjustable shelf
2 open niches
1 deep drawer
The aperture size may be adjusted with
infill panel in door material.
Tall unit for appliances SUMB A 195 H 1100 1158 1205 1303 1373 1553 - 1694 2379
Niche height
upper 380 - 450 mm
lower 595 mm
1 hinged door
2 open niches
1 deep drawer
Infill panel for tall units SBF 15 195 H 205 223 241 260 278 - - 360 426
Finish in door material
split above 780 mm
fitted between wall and carcase
10.80 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill:
200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Corner infill panel for tall units SEBF 20 195 VH 398 415 435 450 469 - - 564 697
Finish in door material
split above 780 mm
For variable planning dimensions
for 90° corner solution
Min. dimension 50 mm per side.
max. 180 mm on carcase front edge per
leg
Side cladding RBS 195 H 759 829 899 969 1780 - - 2092 2093
Finish in door material
for mounting on the carcase side
50 mm wide
for carcase depth 560 mm
Height- and depth-variable side RBSS VH 776 850 924 996 1900 - - 2329 2357
panelling
for mounting on the carcase side
50 mm wide
Finish in door material
Depth variable from 100 to 752 mm
Height variable from 777 to 1946 mm
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. Air vent opening for appliance units in the ceiling infill: 10.81
200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Tall unit S 30 130 H 686 754 792 846 907 - - 1106 1297
S 45 130 H 728 797 836 910 979 - - 1213 1539
1 hinged door S 50 130 H 735 804 845 927 1005 - - 1244 1611
3 adjustable shelves
S 60 130 H 765 833 873 957 1053 - - 1316 1765
Tall unit for provisions SIA 30 130 H 1445 1512 1549 1603 1666 - - 1865 2018
SIA 45 130 H 1485 1553 1594 1668 1736 - - 1971 2258
1 hinged door SIA 50 130 H 1493 1561 1601 1684 1762 - - 2001 2331
4 interior drawers
SIA 60 130 H 1523 1592 1631 1716 1811 - - 2074 2487
Corner tall unit SEKL 110 130 HA 2411 2480 2519 2593 2662 - - 2896 3142
with 45 cm door
1 hinged door SEKL 115 130 HA 2491 2559 2599 2683 2760 - - 2999 3281
4 fully pivotable height adjustable with 50 cm door
carousel shelves LeMans
SEKL 125 130 HA 2600 2668 2708 2792 2888 - - 3151 3512
Arena shelf finish anthracite grey with 60 cm door
carcase width 1000 mm, without corner
infill panel
Corner infill panel for tall units SEBE 65 130 H 221 234 268 321 338 - - 490 538
fixed size corner infill mitred
planning dimensions 650 x 650 mm
Tall unit for built-in appliance SU 88 130 H 746 815 854 937 1033 - - 1296 1746
Niche height 878 mm
1 hinged appliance door
1 fixed shelf
1 worktop ventilation grill
Tall unit for built-in appliance SU 102 130 H 746 815 854 937 1033 - - 1296 1746
Niche height 1025 mm
1 hinged appliance door
1 fixed shelf
1 worktop ventilation grill
Tall unit for built-in appliance SU 122 130 H 724 794 832 917 1012 - - 1274 1724
Niche height 1225 mm
1 hinged appliance door
1 worktop ventilation grill
10.82
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SUM 2A 130 H 1112 1168 1208 1355 1412 - - 1701 2200
niche height 334 - 380 mm
1 open niche
2 deep drawers
Tall unit for built-in appliance SUM 2SA 130 H 1298 1344 1392 1516 1622 - - 1951 2573
niche height 451 mm
1 drawer
1 open niche
1 drawer
1 deep drawer
Tall unit for built-in appliance SUM 130 H 807 861 907 1010 1061 - - 1270 1790
niche height 334 - 380 mm
1 hinged door
2 adjustable shelves
Tall unit for built-in appliance SUB SA 130 H 1057 1097 1132 1242 1316 - - 1569 2053
niche height 585 - 595 mm
1 open niche
1 drawer
1 deep drawer
Support base for integrated high level SUG A 130 H 630 661 679 740 773 - - 919 1181
dishwasher
1 front panel
1 deep drawer reduced 150 mm from
the back
Front panel GSBV 60 XH 182 227 265 320 349 - - 498 837
for fully integrated dishwashers
1 front panel
10.83
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Infill panel for tall units SBF 15 130 H 193 206 221 236 249 - - 313 367
Finish in door material
fitted between wall and carcase
Corner infill panel for tall units SEBF 20 130 VH 400 419 437 454 473 - - 571 683
Finish in continuous door material
For variable planning dimensions
for 90° corner solution
Min. dimension 50 mm per side.
max. 180 mm on carcase front edge per
leg
Side cladding RBS 130 H 594 644 692 743 1283 - - 1576 1618
Finish in door material
for mounting on the carcase side
50 mm wide
for carcase depth 560 mm
Side cladding RBS 130 RH 697 749 795 846 1373 - - 1686 1842
same as above, but
for room divider and carcase depth
560 mm
Height- and depth-variable side RBSS VH 776 850 924 996 1900 - - 2329 2357
panelling
for mounting on the carcase side
50 mm wide
Finish in door material
Depth variable from 100 to 752 mm
Height variable from 777 to 1946 mm
10.84
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Surcharge for room divider version 1 MPRT 1 144 144 144 144 144 144 144 144 144
per unit
the unit is prepared to receive fixed back
panels
The rear carcase edge colour matches
the front carcase edge.
The room divider can be freely planned
and does not depend on the type of unit.
Back panel RB 30 130 H 232 299 336 391 452 - - 649 861
RB 45 130 H 241 308 349 419 489 - - 721 1073
Finish in door material RB 50 130 H 245 312 353 427 505 - - 744 1140
1273 mm high
mounted on the back of free standing RB 60 130 H 261 333 374 448 545 - - 815 1314
tall units
10.85
10.86
horizontal
Tall units
S72
S72
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Tall unit S 30 221 M H 1031 1165 1243 1353 1440 - - 1831 2132
S 45 221 M H 1100 1235 1314 1438 1542 - - 1947 2438
1 flap door with Tip-On S 50 221 M H 1119 1256 1343 1468 1572 - - 1995 2561
1 hinged door
3 adjustable shelves S 60 221 M H 1179 1304 1394 1527 1640 - - 2092 2843
1 hinged door
1 adjustable shelf
Tall unit for provisions S2A 60 221 MH 1496 1621 1711 1844 1957 - - 2409 3160
1 flap door with Tip-On
1 hinged door
3 adjustable shelves
1 fixed shelf
2 deep drawers
Tall unit for provisions SIA 30 221 M H 1950 2083 2162 2271 2358 - - 2749 3006
SIA 45 221 M H 2010 2145 2224 2348 2452 - - 2857 3304
1 flap door with Tip-On SIA 50 221 M H 2033 2170 2257 2382 2486 - - 2909 3431
1 hinged door
1 fixed shelf SIA 60 221 M H 2091 2215 2306 2439 2553 - - 3005 3712
1 hinged door
5 interior deep drawers
ELITE 4 interior deep drawers
Tall unit for built-in appliance SU 88 221 M H 1149 1273 1364 1496 1610 - - 2061 2803
Niche height 878 mm
1 flap door with Tip-On
1 hinged appliance door
1 fixed shelf
1 hinged door
1 adjustable shelf
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.87
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 88 ISIA 221 MH 1801 1925 2016 2148 2262 - - 2713 3455
Niche height 878 mm
1 flap door with Tip-On
2 fixed shelves
878 1 appliance door
1 hinged door
1 internal drawer
2 interior deep drawers
Tall unit for built-in appliance SU 88 2A 221 M H 1382 1508 1593 1770 1890 - - 2421 3146
Niche height 878 mm
1 flap door with Tip-On
1 hinged appliance door
1 fixed shelf
2 deep drawers
Tall unit for built-in appliance SU 102 221 M H 1149 1273 1364 1496 1610 - - 2061 2817
Niche height 1025 mm
1 flap door with Tip-On
1 appliance door
1 hinged door
1 adjustable shelf
Servodrive assisted opening is available
for appliance hinged door at
MPS SERVO KS surcharge.
Tall unit for built-in appliance SU 102 2A 221MH 1382 1508 1593 1770 1890 - - 2421 3160
Niche height 1025 mm
1 flap door with Tip-On
1 appliance door
2 deep drawers
10.88 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 122 221 M H 1077 1204 1296 1431 1547 - - 2009 2011
Niche height 1225 mm
1 hinged appliance door, dowelled
1 fixed shelf
1 hinged door
1 adjustable shelf
Tall unit for built-in appliance SU 122 2A 221MH 1325 1447 1537 1715 1854 - - 2384 3120
Niche height 1225 mm
1 hinged appliance door, dowelled
1 fixed shelf
2 deep drawers
Tall unit for appliances SUB 221 M H 1073 1170 1253 1356 1434 - - 1784 2674
niche height 585 - 595 mm
1 hinged door
2 adjustable shelves
1 open niche
1 hinged door
1 adjustable shelf
Tall unit for appliances SUB ISIA 221 M H 1725 1822 1905 2008 2086 - - 2436 3326
niche height 585 - 595 mm
1 hinged door
2 adjustable shelves
1 open niche
1 hinged door
1 internal drawer
2 interior deep drawers
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.89
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SUB S 221 M H 1229 1331 1411 1527 1600 - - 1947 2828
niche height 585 - 595 mm
1 hinged door
2 adjustable shelves
1 open niche
1 drawer with low frame
1 hinged door
1 adjustable shelf
Tall unit for appliances SUB 2A 221 M H 1355 1452 1530 1678 1762 - - 2193 3061
niche height 585 - 595 mm
1 hinged door
2 adjustable shelves
1 open niche
2 deep drawers
Tall unit for appliances SUB S2A 221 M H 1512 1609 1693 1845 1953 - - 2426 3265
niche height 585 - 595 mm
1 hinged door
2 adjustable shelves
1 open niche
1 drawer with low frame
2 deep drawers
Tall unit for appliances SUMB A 221 M H 1171 1230 1294 1405 1486 - - 1814 2610
Niche height
upper 380 - 409 mm
lower 595 mm
1 hinged door
2 adjustable shelves
2 open niches
1 deep drawer
10.90 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Infill panel for tall units SBF 15 221 M H 231 248 267 285 305 - - 389 461
Finish in door material
split above 715 mm
fitted between wall and carcase
Corner infill panel for tall units SEBF 20 221 M VH 451 470 487 506 526 - - 627 780
Finish in continuous door material
split above 715 mm
For variable planning dimensions
for 90° corner solution
min. dimension 50 mm per side.
max. 180 mm on carcase front edge per
leg
Side cladding RBS 221 MH 783 863 936 1017 1928 - - 2273 2326
Finish in door material
split above 715 mm for the following
ranges: Fronts with horizontal graining in
ALNOSTAR PLAN.
for mounting on the carcase side
50 mm wide
for carcase depth 560 mm
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.91
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Tall unit S 30 208 M H 896 1008 1083 1168 1250 - - 1587 1911
S 45 208 M H 950 1064 1140 1242 1335 - - 1715 2279
1 door (dowelled) S 50 208 M H 966 1080 1156 1269 1372 - - 1757 2399
1 fixed shelf
2 adjustable shelves S 60 208 M H 1014 1126 1203 1321 1444 - - 1851 2646
1 hinged door
1 adjustable shelf
Tall unit for provisions S2A 60 208 MH 1331 1443 1520 1638 1761 - - 2168 2963
1 door (dowelled)
1 fixed shelf
2 adjustable shelves
2 deep drawers
Tall unit for provisions SIA 30 208 M H 1815 1927 2002 2086 2169 - - 2506 2786
SIA 45 208 M H 1858 1973 2049 2151 2245 - - 2623 3144
1 door (dowelled) SIA 50 208 M H 1876 1991 2067 2179 2282 - - 2668 3265
5 interior deep drawers
1 hinged door ELITE 4 interior deep SIA 60 208 M H 1925 2037 2113 2232 2355 - - 2762 3513
drawers
Tall unit for built-in appliance SU 88 208 M H 962 1075 1152 1270 1393 - - 1800 2592
Niche height 878 mm
1 hinged door
1 hinged appliance door
1 hinged door
1 adjustable shelf
Servodrive assisted opening is available
for appliance hinged door at
MPS SERVO KS surcharge.
Tall unit for built-in appliance SU 88 ISIA 208 M H 1614 1727 1804 1922 2045 - - 2452 3244
Niche height 878 mm
1 hinged door
1 hinged appliance door
1 hinged door
1 internal drawer
2 interior deep drawers
10.92 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 88 2A 208 M H 1279 1393 1465 1627 1756 - - 2245 3012
Niche height 878 mm
1 hinged door
1 hinged appliance door
2 deep drawers
Tall unit for built-in appliance SU 102 208 M H 962 1075 1152 1270 1393 - - 1800 2607
Niche height 1025 mm
1 hinged appliance door, dowelled
1 fixed shelf
1 hinged door
1 adjustable shelf
Tall unit for built-in appliance SU 102 2A 208MH 1279 1393 1465 1627 1756 - - 2245 3026
Niche height 1025 mm
1 hinged appliance door, dowelled
1 fixed shelf
2 deep drawers
Tall unit for built-in appliance SU 122 208 M H 947 1059 1135 1254 1377 - - 1784 2591
Niche height 1225 mm
1 hinged appliance door, dowelled
1 hinged door
1 adjustable shelf
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.93
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 122 2A 208MH 1263 1377 1448 1611 1741 - - 2229 3008
Niche height 1225 mm
1 hinged appliance door, dowelled
2 deep drawers
Tall unit for built-in appliance SUB 208 M H 1029 1105 1186 1295 1377 - - 1706 2557
niche height 595 mm
1 hinged door
1 adjustable shelf
1 open niche
1 hinged door
1 adjustable shelf
The aperture size may be adjusted with
infill panel in door material.
Tall unit for built-in appliance SUB ISIA 208 M H 1681 1757 1838 1947 2029 - - 2358 3209
niche height 595 mm
1 hinged door
1 adjustable shelf
1 open niche
1 hinged door
1 internal drawer
2 interior deep drawers
Tall unit for built-in appliance SUB S 208 2 M H 1179 1259 1338 1459 1536 - - 1864 2702
niche height 595 mm
1 hinged door
1 adjustable shelf
1 open niche
1 drawer with low frame
1 hinged door
1 adjustable shelf
10.94 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SUB 2A 208 M H 1334 1411 1487 1641 1729 - - 2140 2966
niche height 595 mm
1 hinged door
1 adjustable shelf
1 open niche
2 deep drawers
Tall unit for built-in appliance SUB S2A 208 1 M H 1501 1577 1661 1819 1930 - - 2383 3179
niche height 595 mm
1 hinged door
1 adjustable shelf
1 open niche
1 drawer with low frame
2 deep drawers
The aperture size may be adjusted with
infill panel in door material.
Tall unit for appliances SUMB A 208 M H 1124 1189 1251 1357 1432 - - 1742 2497
Niche height
upper 380 - 409 mm
lower 595 mm
1 hinged door
1 adjustable shelf
2 open niches
1 deep drawer
Infill panel for tall units SBF 15 208 M H 219 237 255 275 294 - - 377 444
Finish in door material
split above 715 mm
1361 fitted between wall and carcase
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.95
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Corner infill panel for tall units SEBF 20 208 M VH 430 451 470 487 506 - - 607 751
Finish in door material
split above 715 mm
For variable planning dimensions
for 90° corner solution
Min. dimension 50 mm per side.
Max. 180 mm at the carcase front edge
per side.
Side cladding RBS 208 MH 769 846 918 992 1854 - - 2182 2211
Finish in door material
split above 715 mm for the following
ranges: Fronts with horizontal graining in
ALNOSTAR PLAN.
for mounting on the carcase side
50 mm wide
for carcase depth 560 mm
10.96 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Tall unit S 30 195 M H 823 939 1005 1099 1166 - - 1485 1678
S 45 195 M H 878 996 1062 1169 1253 - - 1588 1970
1 hinged door S 50 195 M H 891 1009 1080 1193 1276 - - 1615 2052
3 adjustable shelves
1 hinged door S 60 195 M H 945 1056 1130 1247 1340 - - 1711 2336
1 adjustable shelf
Tall unit for provisions S2A 60 195 M H 1262 1373 1447 1564 1657 - - 2028 2653
1 hinged door
3 adjustable shelves
2 deep drawers
Tall unit for provisions SIA 30 195 M H 1786 1902 1969 2061 2129 - - 2449 2594
SIA 45 195 M H 1836 1953 2021 2127 2210 - - 2547 2880
2 hinged doors SIA 50 195 M H 1851 1970 2041 2153 2236 - - 2574 2966
5 interior deep drawers
ELITE 4 interior deep drawers SIA 60 195 M H 1902 2013 2088 2205 2298 - - 2669 3247
Tall unit for built-in appliance SU 88 195 M H 944 1055 1129 1246 1339 - - 1710 2323
Niche height 878 mm
1 hinged appliance door
1 fixed shelf
1 hinged door
1 adjustable shelf
Tall unit for built-in appliance SU 88 ISIA 195 M H 1596 1707 1781 1898 1991 - - 2362 2975
Niche height 878 mm
1 hinged appliance door
1 fixed shelf
1 hinged door
1 internal drawer
2 interior deep drawers
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.97
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 88 2A 195 M H 1260 1373 1442 1603 1702 - - 2154 2741
Niche height 878 mm
1 hinged appliance door
1 fixed shelf
2 deep drawers
Tall unit for built-in appliance SU 102 195 M H 944 1055 1129 1246 1339 - - 1710 2335
Niche height 1025 mm
1 hinged appliance door
1 fixed shelf
1 hinged door
1 adjustable shelf
Tall unit for built-in appliance SU 102 2A 195MH 1260 1373 1442 1603 1702 - - 2154 2755
Niche height 1025 mm
1 hinged appliance door
1 fixed shelf
2 deep drawers
Tall unit for built-in appliance SUB 195 M H 975 1056 1134 1239 1313 - - 1623 2430
niche height 595 mm
1 hinged door
1 adjustable shelf
1 open niche
1 hinged door
1 adjustable shelf
10.98 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SUB S 195 2 M H 1148 1235 1311 1427 1496 - - 1802 2594
niche height 595 mm
1 hinged door
1 adjustable shelf
1 open niche
1 drawer with low frame
1 hinged door
1 adjustable shelf
Tall unit for built-in appliance SUB ISIA 195 M H 1627 1708 1786 1891 1965 - - 2275 3082
niche height 595 mm
1 hinged door
1 adjustable shelf
1 open niche
1 hinged door
1 internal drawer
2 interior deep drawers
Tall unit for built-in appliance SUB 2A 195 M H 1292 1374 1447 1596 1677 - - 2068 2849
niche height 595 mm
1 hinged door
1 adjustable shelf
1 open niche
2 deep drawers
The aperture size may be adjusted with
infill panel in door material.
Tall unit for built-in appliance SUB S2A 195 M H 1474 1557 1637 1790 1894 - - 2327 3076
niche height 595 mm
1 hinged door
1 adjustable shelf
1 open niche
1 drawer with low frame
2 deep drawers
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.99
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SUMB A 195 M H 1100 1158 1205 1303 1373 - - 1694 2379
Niche height
upper 380 - 409 mm
lower 595 mm
1 hinged door
1 adjustable shelf
2 open niches
1 deep drawer
Infill panel for tall units SBF 15 195 M H 205 223 241 260 278 - - 360 426
Finish in door material
split above 715 mm
fitted between wall and carcase
Corner infill panel for tall units SEBF 20 195 M VH 398 415 435 450 469 - - 564 697
Finish in door material
split above 715 mm
For variable planning dimensions
for 90° corner solution
Min. dimension 50 mm per side.
max. 180 mm on carcase front edge per
leg
Side cladding RBS 195 H 759 829 899 969 1780 - - 2092 2093
Finish in door material
for mounting on the carcase side
50 mm wide
for carcase depth 560 mm
10.100 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Tall unit S 30 130 H 686 754 792 846 907 - - 1106 1297
S 45 130 H 728 797 836 910 979 - - 1213 1539
1 hinged door S 50 130 H 735 804 845 927 1005 - - 1244 1611
3 adjustable shelves
S 60 130 H 765 833 873 957 1053 - - 1316 1765
Tall unit for provisions SIA 30 130 H 1445 1512 1549 1603 1666 - - 1865 2018
SIA 45 130 H 1485 1553 1594 1668 1736 - - 1971 2258
1 hinged door SIA 50 130 H 1493 1561 1601 1684 1762 - - 2001 2331
4 interior drawers
SIA 60 130 H 1523 1592 1631 1716 1811 - - 2074 2487
Corner tall unit SEKL 110 130 HA 2411 2480 2519 2593 2662 - - 2896 3142
with 45 cm door
1 hinged door SEKL 115 130 HA 2491 2559 2599 2683 2760 - - 2999 3281
4 fully pivotable height adjustable with 50 cm door
carousel shelves LeMans
SEKL 125 130 HA 2600 2668 2708 2792 2888 - - 3151 3512
Arena shelf finish anthracite grey with 60 cm door
carcase width 1000 mm, without corner
infill panel
Corner infill panel for tall units SEBE 65 130 H 221 234 268 321 338 - - 490 538
fixed size corner infill mitred
planning dimensions 650 x 650 mm
Tall unit for built-in appliance SU 88 130 H 746 815 854 937 1033 - - 1296 1746
Niche height 878 mm
1 hinged appliance door
1 fixed shelf
1 worktop ventilation grill
Tall unit for built-in appliance SU 102 130 H 746 815 854 937 1033 - - 1296 1746
Niche height 1025 mm
1 hinged appliance door
1 fixed shelf
1 worktop ventilation grill
Tall unit for built-in appliance SU 122 130 H 724 794 832 917 1012 - - 1274 1724
Niche height 1225 mm
1 hinged appliance door
1 worktop ventilation grill
10.101
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 560 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit installation at a distance of 18 mm from the wall 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SUM 2A 130 M H 1112 1168 1208 1355 1412 - - 1701 2200
niche height 451 mm
1 open niche
2 deep drawers
Tall unit for built-in appliance SUB 2A 130 M H 1057 1097 1132 1242 1316 - - 1569 2053
niche height 585 - 595 mm
1 open niche
2 deep drawers
Support base for integrated high level SUG A 130 M H 630 661 679 740 773 - - 919 1181
dishwasher
1 front panel
1 deep drawer reduced 150 mm from
the back
Front panel GSBV 60 XH 182 227 265 320 349 - - 498 837
for fully integrated dishwashers
1 front panel
Infill panel for tall units SBF 15 130 H 193 206 221 236 249 - - 313 367
Finish in door material
fitted between wall and carcase
Corner infill panel for tall units SEBF 20 130 VH 400 419 437 454 473 - - 571 683
Finish in continuous door material
For variable planning dimensions
for 90° corner solution
Min. dimension 50 mm per side.
max. 180 mm on carcase front edge per
leg
Side cladding RBS 130 H 594 644 692 743 1283 - - 1576 1618
Finish in door material
for mounting on the carcase side
50 mm wide
for carcase depth 560 mm
10.102
à
Tall units vertical
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit S 30 221 V 1015 1148 1227 1315 1401 - - 1792 2117
S 45 221 V 1073 1208 1286 1387 1491 - - 1896 2413
1 flap door S 50 221 V 1092 1229 1317 1412 1516 - - 1939 2538
2 hinged doors
2 fixed shelves S 60 221 V 1148 1272 1363 1464 1577 - - 2029 2814
5 adjustable shelves
Tall unit D S 30 221 DV 1015 1148 1227 1315 2046 - - 1792 2117
D S 45 221 DV 1073 1208 1286 1387 2136 - - 1896 2413
same as above, but S 50 221 DV 1092 1229 1317 1412 2257 - - 1939 2538
1 full-height hinged door D
D S 60 221 DV 1148 1272 1363 1464 2367 - - 2029 2814
Only available in ALNOSTAR PLAN, ALNO-
0 STAR DUR, ALNOSTAR FINE, ALNOSTAR
SUND, ALNOSTAR SIGN, ALNOSTAR
GRAND, ALNOSTAR CLASS, ALNOSTAR
STRUCT.
Not available in:
Fronts with horizontal graining in ALNO-
STAR PLAN.
Tall unit for provisions S2A 60 221 V 1413 1537 1628 1729 1842 - - 2294 3079
1 flap door
1 hinged door
3 adjustable shelves
2 fixed shelves
2 deep drawers
Tall unit for broom SB 30 221 V 1155 1288 1367 1455 1542 - - 1933 2250
SB 45 221 V 1212 1347 1425 1527 1631 - - 2035 2546
1 flap door SB 50 221 V 1232 1368 1456 1550 1655 - - 2079 2669
1 door (dowelled)
2 fixed shelves SB 60 221 V 1286 1411 1501 1601 1716 - - 2168 2946
1 hook for brooms
1 holder for vacuum cleaner hose
1 hook rail
2 runners for adjustable wire baskets
3 wire baskets
Tall unit for broom D SB 30 221 DV 1155 1288 1367 1455 2187 - - 1933 2250
D SB 45 221 DV 1212 1347 1425 1527 2349 - - 2035 2546
same as above, but SB 50 221 DV 1232 1368 1456 1550 2397 - - 2079 2669
1 full-height hinged door D
D SB 60 221 DV 1286 1411 1501 1601 2506 - - 2168 2946
Only available in ALNOSTAR PLAN, ALNO-
STAR DUR, ALNOSTAR FINE, ALNOSTAR
0
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.103
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for provisions SA 30 221 VAK 2006 2141 2220 2307 2396 - - 2783 3065
1 pull-out larder unit dowelled
with cushioned opening and closure
5 baskets
Wire basket finish anthracite grey
Matching accessories:
Electrically assisted opening ZAZ 18
Order Orgaset ZI 3011 AG and ZI 3012 AG
Tall unit for provisions D SA 30 221 DVAK 1917 2051 2130 2217 2951 - - 2693 2979
same as above, but
1 pull-out larder unit
Tall unit for provisions SA 30 221 VA 2206 2341 2419 2507 2596 - - 2984 3252
SA 45 221 VA 2288 2424 2502 2601 2706 - - 3111 3573
1 pull-out larder unit dowelled
with cushioned opening and closure
5 baskets
Arena shelf finish anthracite grey
Tall unit for provisions D SA 30 221 DVA 2117 2251 2330 2417 3151 - - 2894 3167
D SA 45 221 DVA 2198 2334 2412 2511 3334 - - 3021 3487
same as above, but
1 pull-out larder unit
10.104 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for provisions SIA 30 221 V 1933 2063 2144 2233 2318 - - 2709 2989
SIA 45 221 V 1982 2118 2197 2296 2402 - - 2806 3277
1 flap door SIA 50 221 V 2004 2143 2229 2324 2430 - - 2852 3406
2 hinged doors
2 fixed shelves SIA 60 221 V 2057 2184 2273 2375 2487 - - 2939 3680
1 adjustable shelf
5 interior deep drawers
Tall unit for provisions D SIA 30 221 DV 1933 2063 2144 2233 2963 - - 2709 2989
D SIA 45 221 DV 1982 2118 2197 2296 3120 - - 2806 3277
same as above, but SIA 50 221 DV 2004 2143 2229 2324 3171 - - 2852 3406
1 full-height hinged door D
D SIA 60 221 DV 2057 2184 2273 2375 3277 - - 2939 3680
Only available in ALNOSTAR PLAN, ALNO-
STAR DUR, ALNOSTAR FINE, ALNOSTAR
SUND, ALNOSTAR SIGN, ALNOSTAR
0
Tall unit for provisions ST 60 221 VA 2105 2229 2320 2421 2534 - - 2986 3771
1 flap door
1 door (dowelled)
1 fixed shelf
1 swing-out mechanism with
4 fixed baskets
1 Orgaset
5 adjustable shelves shortened in depth
Tall unit for provisions ST 60 221 DVA 2105 2229 2320 2421 2534 - - 2986 3771
same as above, but
1 full-height hinged door
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.105
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for provisions SM 60 221 VA 3232 3357 3448 3548 3662 - - 4114 4796
1 flap door
1 door (dowelled)
1 fixed shelf
1 swing-out mechanism with
4 fixed baskets
1 Orgaset
1 swing-out mechanism with
5 adjustable baskets
Tall unit for provisions D SM 60 221 DVA 3232 3357 3448 3548 4452 - - 4114 4796
same as above, but
1 full-height hinged door
Tall unit for built-in appliance SU 88 221 V 1081 1208 1315 1413 1508 - - 1898 2861
Niche height 878 mm
1 hinged door
1 adjustable shelf
1 hinged appliance door
1 hinged door
2 adjustable shelves
Tall unit for built-in appliance SU 88 ISIA 221 V 1733 1860 1967 2065 2160 - - 2550 3513
Niche height 878 mm
1 hinged door
1 adjustable shelf
1 hinged appliance door
1 hinged door
1 internal drawer
2 interior deep drawers
10.106 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 88 S2A 221 V 1518 1648 1750 1875 1997 - - 2472 3517
Niche height 878 mm
1 hinged door
1 adjustable shelf
1 hinged appliance door
1 drawer
2 deep drawers
Tall unit for built-in appliance SU 88 2A 221 V 1344 1472 1573 1683 1784 - - 2255 3230
Niche height 878 mm
1 hinged door
1 adjustable shelf
1 hinged appliance door
2 deep drawers
Tall unit for built-in appliance SU 102 221 V 1083 1203 1309 1418 1529 - - 1890 2808
Niche height 1025 mm
1 hinged door
1 adjustable shelf
1 hinged appliance door
1 hinged door
1 adjustable shelf
Tall unit for built-in appliance SU 102 2A 221 V 1356 1491 1593 1707 1826 - - 2261 3192
Niche height 1025 mm
1 hinged door
1 adjustable shelf
1 hinged appliance door
2 deep drawers
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.107
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 122 A 221 V 1160 1279 1367 1471 1605 - - 2079 2988
Niche height 1225 mm
1 hinged door
1 adjustable shelf
1 hinged appliance door
1 deep drawer
Tall unit for built-in appliance SU 122 2TA 221 V 1236 1362 1466 1574 1677 - - 2147 3127
Niche height 1225 mm
1 hinged door
1 adjustable shelf
2 hinged appliance doors
1 deep drawer
Tall unit for built-in appliance SU 140 221 V 1078 1185 1295 1379 1465 - - 1872 2855
Niche height 1400 mm
1 hinged door
2 adjustable shelves
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 145 2T 221 V 1055 1164 1255 1361 1474 - - 1931 2719
niche height 1450 mm
1 hinged door
1 adjustable shelf
2 hinged appliance doors
10.108 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 145 2T 221 4 V 1052 1176 1278 1387 1498 - - 1924 2739
niche height 1450 mm
1 hinged door
1 adjustable shelf
2 hinged appliance doors
Tall unit for built-in appliance SU 152 2T 221 V 1055 1152 1261 1368 1474 - - 1862 2824
niche height 1446 - 1525 mm
1 hinged door
1 adjustable shelf
2 hinged appliance doors
Tall unit for built-in appliance SU 152 221 V 1063 1171 1280 1364 1449 - - 1857 2840
niche height 1528 mm
1 hinged door
1 adjustable shelf
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 158 2T 221 V 1035 1153 1242 1345 1481 - - 1954 2869
Niche height 1580 mm
1 hinged door
1 adjustable shelf
2 hinged appliance doors
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.109
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 159 221 V 1055 1181 1288 1386 1481 - - 1872 2838
niche height 1450 - 1590 mm
1 hinged door
1 adjustable shelf
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 159 2T 221 V 1055 1181 1288 1386 1481 - - 1872 2837
SU 145 2T 221 3 V 1055 1181 1288 1386 1481 - - 1872 2837
same as above, but
2 hinged appliance doors
Tall unit for built-in appliance SU 159 2T 221 1 V 1057 1176 1283 1391 1502 - - 1864 2783
niche height 1590 mm
1 hinged door
1 adjustable shelf
2 hinged appliance doors
Tall unit for built-in appliance SU 178 221 3 V 1043 1177 1270 1367 1469 - - 1864 2762
Niche height 1780 mm
1 flap door
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 178 2T 221 1 V 1103 1227 1318 1418 1532 - - 1984 2769
same as above, but
2 hinged appliance doors
10.110 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 178 221 1 V 1032 1166 1259 1356 1458 - - 1853 2751
niche height 1585 - 1788 mm
1 hinged door
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 178 2T 221 V 1032 1166 1259 1356 1458 - - 1853 2751
same as above, but
Niche height 1580 mm
2 hinged appliance doors
Tall unit for built-in appliance SU 178 2T 221 2 V 1022 1152 1243 1355 1461 - - 1867 2789
Niche height 1780 mm
1 hinged door
2 hinged appliance doors
Tall unit for built-in appliance SU 178 221 V 959 1066 1157 1265 1379 - - 1835 2628
niche height 1788 mm
1 hinged door
1 hinged appliance door
1 deep drawer for appliances
Tall unit for built-in appliance SU 178 2T 221 3 V 1027 1136 1227 1333 1446 - - 1903 2693
niche height 1788 mm
1 hinged door
2 hinged appliance doors
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.111
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 178 2T 221 4 V 1093 1197 1289 1394 1542 - - 2007 2917
niche height 1788 mm
1 flap door
2 hinged appliance doors
Tall unit for appliances SU 88 72 221 V 1068 1195 1302 1399 1495 - - 1886 2849
Niche height
upper 878 mm
lower 716 mm
1 hinged door
1 adjustable shelf
2 hinged appliance doors
Servodrive assisted opening is available
for appliance hinged door at
MPS SERVO KS surcharge.
Tall unit for appliances SU 102 72 221 V 1044 1177 1270 1367 1470 - - 1866 2762
Niche height
upper 1025 mm
lower 716 mm
1 hinged door
2 hinged appliance doors
Servodrive assisted opening is available
for appliance hinged door at
MPS SERVO KS surcharge.
Tall unit for appliances SU 88 88 221 V 1033 1164 1256 1366 1473 - - 1878 2801
Niche height
upper 878 mm
lower 878 mm
1 hinged door
2 hinged appliance doors
10.112 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SUB 88 221 V 1000 1081 1158 1244 1331 - - 1630 2410
Niche height D SUB 88 221 DV 1000 1081 1158 1244 1331 - - 1630 2410
upper 585 - 595 mm
lower 878 mm
1 hinged door
1 adjustable shelf
1 open niche
1 hinged appliance door
Tall unit for appliances SUB 102 221 V 1000 1081 1158 1244 1331 - - 1630 2410
Niche height D SUB 102 221 DV 1000 1081 1158 1244 1331 - - 1630 2410
upper 585 - 595 mm
lower 1025 mm
1 hinged door
1 adjustable shelf
1 open niche
1 hinged appliance door
Tall unit for appliances SUM 102 221 4 V 908 1012 1089 1172 1256 - - 1577 2410
Niche height D SUM 102 221 4 DV 908 1012 1089 1172 1256 - - 1577 2410
at top 450 mm
at bottom 1025 mm
1 hinged door
1 adjustable shelf
1 open niche
1 hinged appliance door
Tall unit for built-in appliance SUM 221 V 1051 1154 1232 1315 1397 - - 1720 2546
niche height 380 - 450 mm D SUM 221 DV 1051 1154 1232 1315 1397 - - 1720 2546
1 hinged door
2 adjustable shelves
1 open niche
1 hinged door
2 adjustable shelves
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.113
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SUB 221 2 V 1035 1127 1206 1268 1334 - - 1653 2452
niche height 585 - 595 mm D SUB 221 2 DV 1035 1127 1206 1268 1334 - - 1653 2452
1 hinged door
2 adjustable shelves
1 open niche
1 hinged door
2 adjustable shelves
Tall unit for built-in appliance SUB ISIA 221 2 V 1687 1779 1858 1920 1986 - - 2305 3104
niche height 585 - 595 mm D SUB ISIA 221 2 DV 1687 1779 1858 1920 1986 - - 2305 3104
1 hinged door
2 adjustable shelves
1 open niche
1 hinged door
1 internal drawer
2 interior deep drawers
Tall unit for built-in appliance SUB 2A 221 1 V 1302 1394 1468 1541 1615 - - 2013 2823
niche height 585 - 595 mm D SUB 2A 221 1 DV 1302 1394 1468 1541 1615 - - 2013 2823
1 hinged door
2 adjustable shelves
1 open niche
2 deep drawers
Tall unit for built-in appliance SUB S2A 221 V 1492 1588 1662 1750 1844 - - 2248 3124
niche height 585 - 595 mm D SUB S2A 221 DV 1492 1588 1662 1750 1844 - - 2248 3124
1 hinged door
2 adjustable shelves
1 open niche
1 drawer
2 deep drawers
10.114 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 88N 2A 221 V 1238 1297 1364 1430 1499 - - 1815 2403
Niche height 880 mm
1 hinged door
1 adjustable shelf
1 open niche
2 deep drawers
Tall unit for built-in appliance SU 88N 221 V 963 1005 1077 1138 1200 - - 1440 2016
Niche height 880 mm
1 hinged door
1 adjustable shelf
1 open niche
1 hinged door
1 adjustable shelf
Tall unit for appliances SUMKB SA 221 V 1295 1357 1419 1503 1591 - - 1920 2737
Niche height D SUMKB SA 221 DV 1295 1357 1419 1503 1591 - - 1920 2737
upper 334 - 409 mm
lower 585 - 595 mm
1 hinged door
1 adjustable shelf
2 open niches
1 drawer
1 deep drawer
Tall unit for appliances SUMKB 2A 221 V 1319 1382 1456 1539 1635 - - 1986 2776
Niche height D SUMKB 2A 221 DV 1319 1382 1456 1539 1635 - - 1986 2776
upper 334 - 409 mm
lower 585 - 595 mm
1 hinged door
1 adjustable shelf
2 open niches
2 deep drawers
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.115
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SUMKB 221 V 1033 1093 1171 1245 1323 - - 1607 2386
Niche height D SUMKB 221 DV 1033 1093 1171 1245 1323 - - 1607 2386
upper 334 - 409 mm
lower 585 - 595 mm
1 hinged door
1 adjustable shelf
2 open niches
1 hinged door
1 adjustable shelf
Tall unit for appliances SUMB SA 221 V 1285 1356 1426 1505 1594 - - 1924 2667
Niche height D SUMB SA 221 DV 1285 1356 1426 1505 1594 - - 1924 2667
upper 450 mm
lower 585 - 595 mm
1 hinged door
1 adjustable shelf
2 open niches
1 drawer
1 deep drawer
Tall unit for appliances SUMB 2A 221 V 1309 1380 1450 1529 1618 - - 1948 2691
Niche height D SUMB 2A 221 DV 1309 1380 1450 1529 1618 - - 1948 2691
upper 450 mm
lower 585 - 595 mm
1 hinged door
1 adjustable shelf
2 open niches
2 deep drawers
Tall unit for appliances SUMB 221 V 1024 1091 1166 1235 1305 - - 1569 2300
Niche height D SUMB 221 DV 1024 1091 1166 1235 1305 - - 1569 2300
upper 450 mm
lower 585 - 595 mm
1 hinged door
1 adjustable shelf
2 open niches
1 hinged door
1 adjustable shelf
10.116 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SULB 2A 221 V 1653 1747 1831 1921 2010 - - 2449 3291
for free standing microwave D SULB 2A 221 DV 1653 1747 1831 1921 2010 - - 2449 3291
max. 495 mm wide, 330 mm high behind
lift-up door
niche height 585 - 595 mm
1 hinged door
1 adjustable shelf
1 lift-up door
1 open niche
2 deep drawers
Tall unit for appliances SULB 221 V 1374 1450 1539 1624 1706 - - 2071 2899
for free standing microwave D SULB 221 DV 1374 1450 1539 1624 1706 - - 2071 2705
max. 495 mm wide, 330 mm high behind
lift-up door
niche height 585 - 595 mm
1 hinged door
1 adjustable shelf
1 lift-up door
1 open niche
1 hinged door
1 adjustable shelf
Infill panel for tall units SBF 15 221 V 231 248 267 285 305 - - 389 461
Finish in continuous door material
split above 780 mm for the following
ranges: Fronts with horizontal graining
in ALNO-
STAR PLAN.
fitted between wall and carcase
In ALNOSTAR CERA, ALNOSTAR SATINA
and ALNOSTAR VETRINA
Door width 75 mm,adjustment
range in carcase finish
between 77 - 150 mm.
Other front widths (at least 50 mm)
available with MPS 1 on request.
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.117
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Corner infill panel for tall units SEBF 20 221 V V 451 470 487 506 526 - - 627 780
Finish in continuous door material
split above 780 mm for the following
ranges: Fronts with horizontal graining
in ALNO-
STAR PLAN.
For variable planning dimensions
for 90° corner solution
Min. dimension 50 mm per side.
max. 180 mm on carcase front edge per
leg
Side cladding RBS 221 H 783 863 936 1017 1928 - - 2273 2326
Finish in door material
split above 780 mm for the following
ranges: Fronts with horizontal graining
in ALNO-
STAR PLAN.
for mounting on the carcase side
50 mm wide
for carcase depth 560 mm
10.118 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit S 30 208 V 924 1036 1112 1175 1257 - - 1595 1939
S 45 208 V 969 1082 1159 1237 1331 - - 1710 2297
2 hinged doors S 50 208 V 984 1100 1175 1258 1361 - - 1747 2417
1 fixed shelf
5 adjustable shelves S 60 208 V 1027 1140 1217 1303 1426 - - 1833 2659
Tall unit D S 30 208 DV 924 1036 1112 1175 1892 - - 1595 1939
D S 45 208 DV 969 1082 1159 1237 1967 - - 1710 2297
same as above, but S 50 208 DV 984 1100 1175 1258 2088 - - 1747 2417
1 full-height hinged door D
D S 60 208 DV 1027 1140 1217 1303 2199 - - 1833 2659
0 Only available in ALNOSTAR PLAN, ALNO-
STAR DUR, ALNOSTAR FINE, ALNOSTAR
SUND, ALNOSTAR SIGN, ALNOSTAR
GRAND, ALNOSTAR CLASS, ALNOSTAR
STRUCT.
Not available in:
Fronts with horizontal graining in ALNO-
STAR PLAN.
Tall unit for provisions S2A 60 208 V 1292 1405 1482 1568 1691 - - 2098 2924
1 hinged door
1 fixed shelf
3 adjustable shelves
2 deep drawers
Tall unit for broom SB 30 208 V 1006 1119 1194 1257 1339 - - 1677 2017
SB 45 208 V 1050 1163 1240 1319 1412 - - 1791 2375
1 door (dowelled) SB 50 208 V 1067 1181 1257 1340 1443 - - 1829 2495
1 fixed shelf
1 adjustable shelf SB 60 208 V 1106 1219 1295 1381 1505 - - 1911 2734
1 hook for brooms
1 holder for vacuum cleaner hose
1 hook rail
2 runners for adjustable wire baskets
3 wire baskets
Tall unit for broom D SB 30 208 DV 1006 1119 1194 1257 1975 - - 1677 2017
D SB 45 208 DV 1050 1163 1240 1319 2117 - - 1791 2375
same as above, but SB 50 208 DV 1067 1181 1257 1340 2171 - - 1829 2495
1 full-height hinged door D
D SB 60 208 DV 1106 1219 1295 1381 2278 - - 1911 2734
Only available in ALNOSTAR PLAN, ALNO-
STAR DUR, ALNOSTAR FINE, ALNOSTAR
0
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.119
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for provisions SA 30 208 VAK 1798 1916 1988 2051 2135 - - 2469 2777
1 pull-out larder unit dowelled
with cushioned opening and closure
5 baskets
Wire basket finish anthracite grey
Matching accessories:
Electrically assisted opening ZAZ 18
Order Orgaset ZI 3011 AG and ZI 3012 AG
Tall unit for provisions D SA 30 208 DVAK 1798 1916 1988 2051 2770 - - 2469 2777
same as above, but
1 pull-out larder unit
Tall unit for provisions SA 30 208 VA 1999 2115 2188 2252 2335 - - 2669 2964
SA 45 208 VA 2083 2195 2273 2351 2446 - - 2822 3363
1 pull-out larder unit dowelled
with cushioned opening and closure
5 baskets
Arena shelf finish anthracite grey
Matching accessories:
Electrically assisted opening ZAZ 18
Order Orgaset ZI 3011 AG and ZI 3012 AG
Tall unit for provisions D SA 30 208 DVA 1999 2115 2188 2252 2970 - - 2669 2964
D SA 45 208 DVA 2083 2195 2273 2351 3151 - - 2822 3363
same as above, but
1 pull-out larder unit
STRUCT.
Not available in:
Fronts with horizontal graining in ALNO-
STAR PLAN.
10.120 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for provisions SIA 30 208 V 1843 1955 2031 2094 2176 - - 2513 2812
SIA 45 208 V 1878 1992 2069 2147 2241 - - 2619 3162
2 hinged doors SIA 50 208 V 1895 2009 2085 2169 2272 - - 2657 3283
1 shelf
1 fixed shelf SIA 60 208 V 1938 2051 2128 2213 2337 - - 2745 3525
5 interior deep drawers
Tall unit for provisions D SIA 30 208 DV 1843 1955 2031 2094 2811 - - 2513 2812
D SIA 45 208 DV 1878 1992 2069 2147 2946 - - 2619 3162
same as above, but SIA 50 208 DV 1895 2009 2085 2169 2999 - - 2657 3283
1 full-height hinged door D
D SIA 60 208 DV 1938 2051 2128 2213 3110 - - 2745 3525
Only available in ALNOSTAR PLAN, ALNO-
0 STAR DUR, ALNOSTAR FINE, ALNOSTAR
SUND, ALNOSTAR SIGN, ALNOSTAR
GRAND, ALNOSTAR CLASS, ALNOSTAR
STRUCT.
Not available in:
Fronts with horizontal graining in ALNO-
STAR PLAN.
Tall unit for provisions ST 60 208 VA 1984 2097 2174 2260 2383 - - 2790 3616
1 door (dowelled)
1 swing-out mechanism with
4 fixed baskets
1 Orgaset
5 adjustable shelves shortened in depth
Tall unit for provisions ST 60 208 DVA 1984 2097 2174 2260 2383 - - 2790 3616
same as above, but
1 full-height hinged door
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.121
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for provisions SM 60 208 VA 3135 3248 3324 3411 3534 - - 3941 4663
1 door (dowelled)
1 adjustable shelf
1 swing-out mechanism with
4 fixed baskets
1 Orgaset
1 swing-out mechanism with
5 adjustable baskets
Tall unit for provisions D SM 60 208 DVA 3135 3248 3324 3411 4307 - - 3941 4663
same as above, but
1 full-height hinged door
Tall unit for built-in appliance SU 88 208 V 1042 1161 1254 1345 1435 - - 1841 2740
Niche height 878 mm
1 hinged door
1 hinged appliance door
1 hinged door
2 adjustable shelves
Tall unit for built-in appliance SU 88 ISIA 208 V 1694 1813 1906 1997 2087 - - 2493 3392
Niche height 878 mm
1 hinged door
1 hinged appliance door
1 hinged door
1 internal drawer
2 interior deep drawers
10.122 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 88 S2A 208 V 1485 1608 1696 1815 1932 - - 2423 3402
Niche height 878 mm
1 hinged door
1 hinged appliance door
1 drawer
2 deep drawers
Tall unit for built-in appliance SU 88 2A 208 V 1307 1427 1515 1618 1715 - - 2200 3111
Niche height 878 mm
1 hinged door
1 hinged appliance door
2 deep drawers
Tall unit for built-in appliance SU 102 208 V 1044 1156 1248 1350 1457 - - 1832 2686
Niche height 1025 mm
1 hinged door
1 hinged appliance door
1 hinged door
1 adjustable shelf
Tall unit for built-in appliance SU 102 2A 208 V 1319 1447 1534 1642 1755 - - 2206 3072
Niche height 1025 mm
1 hinged door
1 hinged appliance door
2 deep drawers
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.123
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 122 A 208 V 1123 1234 1308 1405 1535 - - 2024 2868
Niche height 1225 mm
1 hinged door
1 hinged appliance door
1 deep drawer
Tall unit for built-in appliance SU 122 2T A 208 V 1171 1289 1378 1480 1578 - - 2063 2980
Niche height 1225 mm
1 hinged door
2 hinged appliance doors
1 deep drawer
Tall unit for built-in appliance SU 140 208 V 1043 1129 1239 1327 1417 - - 1803 2746
Niche height 1400 mm
1 hinged door
1 adjustable shelf
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 145 2T 208 V 1048 1165 1253 1355 1461 - - 1901 2648
niche height 1450 mm
1 hinged door
1 adjustable shelf
2 hinged appliance doors
10.124 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 145 2T 208 4 V 1026 1143 1231 1333 1440 - - 1880 2629
niche height 1450 mm
1 hinged door
2 hinged appliance doors
Tall unit for built-in appliance SU 152 2T 208 V 1048 1153 1259 1362 1461 - - 1831 2754
niche height 1446 - 1525 mm
1 hinged door
1 adjustable shelf
2 hinged appliance doors
Tall unit for built-in appliance SU 152 208 V 1043 1159 1267 1345 1424 - - 1815 2758
niche height 1528 mm
1 hinged door
1 adjustable shelf
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 158 2T 208 V 1009 1119 1194 1290 1422 - - 1909 2759
Niche height 1580 mm
1 hinged door
2 hinged appliance doors
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.125
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 159 208 V 1005 1124 1217 1308 1398 - - 1803 2705
niche height 1450 - 1590 mm
1 hinged door
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 159 2T 208 V 1018 1136 1229 1321 1411 - - 1817 2716
SU 145 2T 208 3 V 1018 1136 1229 1321 1411 - - 1817 2716
same as above, but
2 hinged appliance doors
Tall unit for built-in appliance SU 159 2T 208 1 V 1020 1131 1224 1326 1432 - - 1807 2663
niche height 1590 mm
1 hinged door
2 hinged appliance doors
Tall unit for built-in appliance SU 178 208 V 1021 1123 1213 1320 1439 - - 1870 2615
niche height 1790 mm
1 flap door
1 hinged appliance door
1 deep drawer for appliances
Tall unit for built-in appliance SU 178 208 4 V 953 1066 1142 1229 1352 - - 1759 2588
niche height 1780-1790 mm
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 178 2T 208 V 942 1055 1131 1218 1341 - - 1748 2577
same as above, but
2 hinged appliance doors
10.126 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 178 208 1 V 1097 1224 1317 1412 1520 - - 1890 2741
niche height 1580 - 1790 mm
1 flap door
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 178 2T 208 1 V 1095 1223 1316 1411 1519 - - 1888 2740
same as above, but
Niche height 1580 mm
2 hinged appliance doors
Tall unit for built-in appliance D SU 178 208 1 DV 1097 1224 1317 1412 2289 - - 1890 2741
niche height 1580 - 1790 mm
1 full-height hinged appliance door
Tall unit for built-in appliance SU 178 2T 208 3 V 1090 1193 1283 1389 1507 - - 1938 2683
niche height 1790 mm
1 flap door
2 hinged appliance doors
Tall unit for built-in appliance SU 178 208 2 V 1091 1194 1284 1390 1508 - - 1940 2684
same as above, but
1 hinged appliance door, dowelled
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.127
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 178 2T 208 2 V 1084 1209 1301 1410 1522 - - 1901 2778
Niche height 1780 mm
1 flap door
2 hinged appliance doors
Tall unit for appliances SU 88 72 208 V 1029 1149 1241 1332 1423 - - 1828 2727
Niche height
upper 878 mm
lower 716 mm
1 hinged door
2 hinged appliance doors
Tall unit for appliances SU 102 72 208 V 1107 1234 1327 1423 1530 - - 1900 2751
Niche height
upper 1025 mm
lower 716 mm
1 flap door
2 hinged appliance doors
Servodrive assisted opening is available
for appliance hinged door at
MPS SERVO KS surcharge.
Tall unit for appliances SU 88 88 208 V 1097 1221 1312 1422 1533 - - 1913 2789
Niche height
upper 878 mm
lower 878 mm
1 flap door
2 hinged appliance doors
10.128 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SUB 88 208 V 990 1079 1154 1235 1316 - - 1596 2335
Niche height D SUB 88 208 DV 990 1079 1154 1235 1316 - - 1596 2335
upper 585 - 595 mm
lower 878 mm
1 hinged door
1 adjustable shelf
1 open niche
1 hinged appliance door
Tall unit for appliances SUB 102 208 V 942 1031 1106 1187 1268 - - 1548 2289
Niche height D SUB 102 208 DV 942 1031 1106 1187 1268 - - 1548 2289
upper 585 - 595 mm
lower 1025 mm
1 hinged door
1 open niche
1 hinged appliance door
Tall unit for appliances SUM 102 208 5 V 927 1009 1086 1174 1261 - - 1562 2351
Niche height D SUM 102 208 5 DV 927 1009 1086 1174 1261 - - 1562 2351
at top 450 mm
at bottom 1025 mm
1 hinged door
1 adjustable shelf
1 open niche
1 hinged appliance door
Tall unit for built-in appliance SUM 208 V 1023 1105 1182 1270 1357 - - 1658 2443
niche height 380 - 450 mm D SUM 208 DV 1023 1105 1182 1270 1357 - - 1658 2443
1 hinged door
1 adjustable shelf
1 open niche
1 hinged door
2 adjustable shelves
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.129
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SUB 208 2 V 1009 1079 1157 1224 1294 - - 1592 2348
niche height 585 - 595 mm D SUB 208 2 DV 1009 1079 1157 1224 1294 - - 1592 2348
1 hinged door
1 adjustable shelf
1 open niche
1 hinged door
2 adjustable shelves
Tall unit for built-in appliance SUB ISIA 208 2 V 1661 1731 1809 1876 1946 - - 2244 3000
niche height 585 - 595 mm D SUB ISIA 208 2 DV 1661 1731 1809 1876 1946 - - 2244 3000
1 hinged door
1 adjustable shelf
1 open niche
1 hinged door
1 internal drawer
2 interior deep drawers
Tall unit for built-in appliance SUB 2A 208 1 V 1266 1336 1409 1487 1565 - - 1943 2711
niche height 585 - 595 mm D SUB 2A 208 1 DV 1266 1336 1409 1487 1565 - - 1943 2711
1 hinged door
1 adjustable shelf
1 open niche
2 deep drawers
The aperture size may be adjusted with
infill panel in door material.
Tall unit for built-in appliance SUB S2A 208 V 1467 1540 1613 1706 1804 - - 2187 3022
niche height 585 - 595 mm D SUB S2A 208 DV 1467 1540 1613 1706 1804 - - 2187 3022
1 hinged door
1 adjustable shelf
1 open niche
1 drawer
2 deep drawers
10.130 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 88N 2A 208 V 1230 1297 1361 1423 1484 - - 1782 2328
Niche height 880 mm
1 hinged door
1 adjustable shelf
1 open niche
2 deep drawers
Tall unit for built-in appliance SU 88N 208 V 952 1002 1071 1127 1181 - - 1404 1936
Niche height 880 mm
1 hinged door
1 adjustable shelf
1 open niche
1 hinged door
1 adjustable shelf
Tall unit for appliances SUMKB SA 208 V 1287 1357 1417 1496 1578 - - 1888 2665
Niche height D SUMKB SA 208 DV 1287 1357 1417 1496 1578 - - 1888 2665
upper 334 - 409 mm
lower 585 - 595 mm
1 hinged door
1 adjustable shelf
2 open niches
1 drawer
1 deep drawer
Tall unit for appliances SUMKB 2A 208 V 1311 1382 1454 1532 1622 - - 1954 2704
Niche height D SUMKB 2A 208 DV 1311 1382 1454 1532 1622 - - 1954 2704
upper 334 - 409 mm
lower 585 - 595 mm
1 hinged door
1 adjustable shelf
2 open niches
2 deep drawers
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.131
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SUMKB 208 V 1023 1091 1166 1235 1306 - - 1572 2309
Niche height D SUMKB 208 DV 1023 1091 1166 1235 1306 - - 1572 2309
upper 334 - 409 mm
lower 585 - 595 mm
1 hinged door
1 adjustable shelf
2 open niches
1 hinged door
1 adjustable shelf
Tall unit for appliances SUMB SA 208 V 1247 1309 1366 1437 1521 - - 1866 2543
Niche height D SUMB SA 208 DV 1247 1309 1366 1437 1521 - - 1866 2543
upper 450 mm
lower 585 - 595 mm
1 hinged door
2 open niches
1 drawer
1 deep drawer
Tall unit for appliances SUMB 2A 208 V 1271 1333 1390 1461 1545 - - 1890 2567
Niche height D SUMB 2A 208 DV 1271 1333 1390 1461 1545 - - 1890 2567
upper 450 mm
lower 585 - 595 mm
1 hinged door
2 open niches
2 deep drawers
Tall unit for appliances SUMB 208 V 983 1043 1103 1166 1230 - - 1508 2174
Niche height D SUMB 208 DV 983 1043 1103 1166 1230 - - 1508 2174
upper 450 mm
lower 585 - 595 mm
1 hinged door
2 open niches
1 hinged door
1 adjustable shelf
10.132 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SULB 2A 208 V 1619 1704 1774 1856 1942 - - 2396 3171
for free standing microwave D SULB 2A 208 DV 1619 1704 1774 1856 1942 - - 2396 3171
max. 495 mm wide, 330 mm high behind
lift-up door
niche height 585 - 595 mm
1 hinged door
1 lift-up door
1 open niche
2 deep drawers
Tall unit for appliances SULB 208 V 1334 1404 1478 1556 1633 - - 2011 2776
for free standing microwave D SULB 208 DV 1444 1511 1585 1665 1743 - - 2121 2875
max. 495 mm wide, 330 mm high behind
lift-up door
niche height 585 - 595 mm
1 hinged door
1 lift-up door
1 open niche
1 hinged door
1 adjustable shelf
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.133
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Infill panel for tall units SBF 15 208 V 219 237 255 275 294 - - 377 444
Finish in continuous door material
split above 780 mm for the following
ranges: Fronts with horizontal graining
in ALNO-
STAR PLAN.
fitted between wall and carcase
Corner infill panel for tall units SEBF 20 208 V V 418 439 457 473 493 - - 590 729
Finish in continuous door material
split above 780 mm for the following
ranges: Fronts with horizontal graining
in ALNO-
STAR PLAN.
For variable planning dimensions
for 90° corner solution
Min. dimension 50 mm per side.
Max. 180 mm at the carcase front edge
per side.
Side cladding RBS 208 H 769 846 918 992 1854 - - 2182 2211
Finish in door material
split above 780 mm for the following
ranges: Fronts with horizontal graining
in ALNO-
STAR PLAN.
for mounting on the carcase side
50 mm wide
for carcase depth 560 mm
10.134 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit S 30 195 V 852 968 1033 1106 1173 - - 1493 1704
S 45 195 V 898 1015 1081 1165 1248 - - 1584 1987
2 hinged doors S 50 195 V 910 1028 1100 1182 1266 - - 1603 2070
1 fixed shelf
5 adjustable shelves S 60 195 V 958 1070 1144 1229 1322 - - 1693 2348
Tall unit D S 30 195 DV 852 968 1033 1106 1800 - - 1493 1704
D S 45 195 DV 898 1015 1081 1165 1876 - - 1584 1987
same as above, but S 50 195 DV 910 1028 1100 1182 1979 - - 1603 2070
1 full-height hinged door D
D S 60 195 DV 958 1070 1144 1229 2079 - - 1693 2348
Only available in ALNOSTAR PLAN, ALNO-
STAR DUR, ALNOSTAR FINE, ALNOSTAR
SUND, ALNOSTAR SIGN, ALNOSTAR
GRAND, ALNOSTAR CLASS, ALNOSTAR
STRUCT.
Tall unit for provisions S2A 60 195 V 1223 1335 1409 1494 1587 - - 1958 2613
1 hinged door
1 fixed shelf
3 adjustable shelves
2 deep drawers
Tall unit for broom SB 30 195 V 981 1098 1163 1235 1303 - - 1623 1828
SB 45 195 V 1025 1142 1209 1292 1376 - - 1712 2109
1 door (dowelled) SB 50 195 V 1046 1163 1234 1318 1400 - - 1738 2198
1 fixed shelf
1 hook for brooms SB 60 195 V 1084 1196 1271 1356 1448 - - 1820 2468
1 holder for vacuum cleaner hose
1 hook rail
2 runners for adjustable wire baskets
3 wire baskets
Tall unit for broom D SB 30 195 DV 981 1098 1163 1235 1930 - - 1623 1828
D SB 45 195 DV 1025 1142 1209 1292 2068 - - 1712 2109
same as above, but SB 50 195 DV 1046 1163 1234 1318 2113 - - 1738 2198
1 full-height hinged door D
D SB 60 195 DV 1084 1196 1271 1356 2205 - - 1820 2468
Only available in ALNOSTAR PLAN, ALNO-
STAR DUR, ALNOSTAR FINE, ALNOSTAR
SUND, ALNOSTAR SIGN, ALNOSTAR
GRAND, ALNOSTAR CLASS, ALNOSTAR
STRUCT.
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.135
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for provisions SA 30 195 VAK 1760 1880 1944 2015 2085 - - 2402 2574
1 pull-out larder unit dowelled
with cushioned opening and closure
5 baskets
Wire basket finish anthracite grey
Matching accessories:
Electrically assisted opening ZAZ 18
(Accessories / Interior equipment section).
Order Orgaset ZI 3011 AG and ZI 3012 AG
Tall unit for provisions D SA 30 195 DVAK 1646 1744 1817 1859 2529 - - 2176 2403
same as above, but
1 pull-out larder unit
Tall unit for provisions SA 30 195 VA 1979 2099 2162 2234 2304 - - 2621 2781
SA 45 195 VA 2041 2157 2224 2306 2390 - - 2725 3080
1 pull-out larder unit dowelled
with cushioned opening and closure
5 baskets
Arena shelf finish anthracite grey
Matching accessories:
Electrically assisted opening ZAZ 18
Order Orgaset ZI 3011 AG and ZI 3012 AG
Tall unit for provisions D SA 30 195 DVA 1782 1880 1952 1995 2664 - - 2311 2531
same as above, but D SA 45 195 DVA 2041 2157 2224 2306 3081 - - 2725 3080
1 pull-out larder unit
10.136 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for provisions SIA 30 195 V 1816 1931 1997 2070 2136 - - 2456 2620
SIA 45 195 V 1855 1973 2040 2123 2206 - - 2543 2898
2 hinged doors SIA 50 195 V 1871 1988 2059 2143 2226 - - 2563 2984
1 adjustable shelf
1 fixed shelf SIA 60 195 V 1917 2028 2102 2187 2280 - - 2651 3259
5 interior deep drawers
Tall unit for provisions D SIA 30 195 DV 1816 1931 1997 2070 2763 - - 2456 2620
D SIA 45 195 DV 1855 1973 2040 2123 2898 - - 2543 2898
same as above, but SIA 50 195 DV 1871 1988 2059 2143 2939 - - 2563 2984
1 full-height hinged door D
D SIA 60 195 DV 1917 2028 2102 2187 3037 - - 2651 3259
Only available in ALNOSTAR PLAN, ALNO-
STAR DUR, ALNOSTAR FINE, ALNOSTAR
SUND, ALNOSTAR SIGN, ALNOSTAR
GRAND, ALNOSTAR CLASS, ALNOSTAR
STRUCT.
Tall unit for provisions ST 60 195 VA 1915 2027 2101 2186 2279 - - 2650 3305
1 door (dowelled)
1 swing-out mechanism with
4 fixed baskets
1 Orgaset
5 adjustable shelves shortened in depth
Tall unit for provisions ST 60 195 DVA 1915 2027 2101 2186 2279 - - 2650 3305
same as above, but
1 full-height hinged door
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.137
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for provisions SM 60 195 VA 3113 3224 3299 3384 3476 - - 3847 4396
1 door (dowelled)
1 swing-out mechanism with
4 fixed baskets
1 Orgaset
1 swing-out mechanism with
5 adjustable baskets
Tall unit for provisions D SM 60 195 DVA 3113 3224 3299 3384 4233 - - 3847 4396
same as above, but
1 full-height hinged door
Tall unit for built-in appliance SU 88 195 V 1084 1197 1289 1378 1473 - - 1849 2696
Niche height 878 mm
1 flap door
1 hinged appliance door
1 hinged door
2 adjustable shelves
Tall unit for built-in appliance SU 88 ISIA 195 V 1736 1849 1941 2030 2125 - - 2501 3348
Niche height 878 mm
1 flap door
1 hinged appliance door
1 hinged door
1 internal drawer
2 interior deep drawers
10.138 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 88 S2A 195 V 1529 1645 1732 1848 1971 - - 2432 3360
Niche height 878 mm
1 flap door
1 hinged appliance door
1 drawer
2 deep drawers
Tall unit for built-in appliance SU 88 2A 195 V 1349 1463 1549 1650 1751 - - 2208 3068
Niche height 878 mm
1 flap door
1 hinged appliance door
2 deep drawers
Tall unit for built-in appliance SU 102 195 V 1086 1192 1283 1383 1494 - - 1841 2643
Niche height 1025 mm
1 flap door
1 hinged appliance door
1 hinged door
1 adjustable shelf
Tall unit for built-in appliance SU 102 2A 195 V 1361 1483 1570 1675 1793 - - 2215 3029
Niche height 1025 mm
1 flap door
1 hinged appliance door
2 deep drawers
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.139
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 122 A 195 V 1165 1270 1342 1436 1572 - - 2031 2823
Niche height 1225 mm
1 flap door
1 hinged appliance door
1 deep drawer
Tall unit for built-in appliance SU 122 2TA 195 V 1241 1353 1441 1541 1643 - - 2100 2964
Niche height 1225 mm
1 flap door
2 hinged appliance doors
1 deep drawer
Tall unit for built-in appliance SU 140 195 V 1033 1127 1233 1317 1398 - - 1766 2660
Niche height 1400 mm
1 hinged door
1 adjustable shelf
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 145 2T 195 V 984 1093 1167 1261 1362 - - 1815 2491
niche height 1450 mm
1 hinged door
2 hinged appliance doors
10.140 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 145 2T 195 4 V 1081 1192 1279 1379 1490 - - 1901 2597
niche height 1450 mm
1 flap door
2 hinged appliance doors
Tall unit for built-in appliance SU 152 2T 195 V 984 1081 1173 1269 1362 - - 1744 2596
niche height 1446 - 1525 mm
1 hinged door
2 hinged appliance doors
Tall unit for built-in appliance SU 152 195 V 993 1101 1193 1265 1337 - - 1740 2612
niche height 1528 mm
1 hinged door
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 158 2T 195 V 1052 1155 1229 1323 1459 - - 1919 2715
Niche height 1580 mm
1 flap door
2 hinged appliance doors
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.141
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 159 195 V 1060 1173 1265 1354 1448 - - 1825 2673
niche height 1450 - 1590 mm
1 flap door
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 159 2T 195 1 V 1062 1168 1259 1359 1470 - - 1817 2619
niche height 1590 mm
1 flap door
2 hinged appliance doors
Tall unit for built-in appliance SU 159 2T 195 V 1060 1173 1265 1354 1448 - - 1825 2672
SU 145 2T 195 3 V 1060 1173 1265 1354 1448 - - 1825 2672
same as above, but
2 hinged appliance doors
Tall unit for built-in appliance SU 178 195 1 V 921 1032 1107 1192 1284 - - 1655 2312
niche height 1585 - 1788 mm
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 178 2T 195 V 921 1032 1107 1192 1284 - - 1655 2312
same as above, but
Niche height 1580 mm
2 hinged appliance doors
10.142 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 178 195 V 856 946 1022 1112 1239 - - 1623 2406
niche height 1788 mm
1 hinged appliance door
1 deep drawer for appliances
Tall unit for built-in appliance SU 178 2T 195 2 V 927 1053 1128 1228 1330 - - 1620 2363
Niche height 1780 mm
2 hinged appliance doors
Tall unit for built-in appliance SU 178 2T 195 3 V 922 1012 1087 1178 1305 - - 1688 2469
niche height 1788 mm
2 hinged appliance doors
Tall unit for built-in appliance D SU 178 195 1 DV 921 1032 1107 1192 2041 - - 1655 2312
niche height 1585 - 1788 mm
1 full-height hinged appliance door
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.143
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SU 88 72 195 V 1073 1185 1277 1367 1461 - - 1837 2685
Niche height
upper 878 mm
lower 716 mm
1 flap door
2 hinged appliance doors
Tall unit for appliances SU 102 72 195 V 930 1042 1117 1202 1294 - - 1666 2322
Niche height
upper 1025 mm
lower 716 mm
2 hinged appliance doors
Tall unit for appliances SU 88 88 195 V 927 1053 1128 1228 1330 - - 1620 2363
Niche height
upper 878 mm
lower 878 mm
2 hinged appliance doors
Tall unit for appliances SUB 88 195 V 931 1012 1072 1146 1221 - - 1513 2181
Niche height D SUB 88 195 DV 931 1012 1072 1146 1221 - - 1513 2181
upper 585 - 595 mm
lower 878 mm
1 hinged door
1 open niche
1 hinged appliance door
10.144 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SUB 102 195 V 1031 1062 1112 1160 1290 - - 1494 2280
Niche height D SUB 102 195 DV 1031 1062 1112 1160 1290 - - 1494 2280
upper 585 - 595 mm
lower 1025 mm
1 flap door
1 open niche
1 hinged appliance door
Tall unit for appliances SUM 102 195 4 V 851 940 1015 1097 1176 - - 1457 2201
Niche height D SUM 102 195 4 DV 851 940 1015 1097 1176 - - 1457 2201
at top 450 mm
at bottom 1025 mm
1 hinged door
1 open niche
1 hinged appliance door
Tall unit for built-in appliance SUM 195 V 995 1083 1158 1240 1320 - - 1600 2338
niche height 380 - 450 mm D SUM 195 DV 995 1083 1158 1240 1320 - - 1600 2338
1 hinged door
1 adjustable shelf
1 open niche
1 hinged door
2 adjustable shelves
Tall unit for built-in appliance SUB 195 2 V 967 1044 1119 1180 1243 - - 1521 2231
niche height 585 - 595 mm D SUB 195 2 DV 967 1044 1119 1180 1243 - - 1521 2231
1 hinged door
1 adjustable shelf
1 open niche
1 hinged door
2 adjustable shelves
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.145
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SUB ISIA 195 2 V 1619 1696 1771 1832 1895 - - 2173 2883
niche height 585 - 595 mm D SUB ISIA 195 2 DV 1619 1696 1771 1832 1895 - - 2173 2883
1 hinged door
1 adjustable shelf
1 open niche
1 hinged door
1 internal drawer
2 interior deep drawers
Tall unit for built-in appliance SUB 2A 195 1 V 1246 1325 1394 1468 1536 - - 1895 2616
niche height 585 - 595 mm D SUB 2A 195 1 DV 1246 1325 1394 1468 1536 - - 1895 2616
1 hinged door
1 adjustable shelf
1 open niche
2 deep drawers
Tall unit for built-in appliance SUB S2A 195 V 1439 1520 1590 1678 1769 - - 2131 2919
niche height 585 - 595 mm D SUB S2A 195 DV 1439 1520 1590 1678 1769 - - 2131 2919
1 hinged door
1 adjustable shelf
1 open niche
1 drawer
2 deep drawers
Tall unit for built-in appliance SU 88N 2A 195 V 1171 1229 1278 1332 1389 - - 1698 2173
Niche height 880 mm
1 hinged door
1 open niche
2 deep drawers
10.146 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 88N 195 V 894 934 989 1037 1086 - - 1321 1783
Niche height 880 mm
1 hinged door
1 open niche
1 hinged door
1 adjustable shelf
Tall unit for appliances SUMKB SA 195 V 1226 1287 1332 1404 1480 - - 1803 2508
Niche height D SUMKB SA 195 DV 1226 1287 1332 1404 1480 - - 1803 2508
upper 334 - 409 mm
lower 585 - 595 mm
1 hinged door
2 open niches
1 drawer
1 deep drawer
Tall unit for appliances SUMKB 2A 195 V 1250 1312 1369 1440 1524 - - 1869 2547
Niche height D SUMKB 2A 195 DV 1250 1312 1369 1440 1524 - - 1869 2547
upper 334 - 409 mm
lower 585 - 595 mm
1 hinged door
2 open niches
2 deep drawers
Tall unit for appliances SUMKB 195 V 964 1023 1082 1145 1210 - - 1487 2155
Niche height D SUMKB 195 DV 964 1023 1082 1145 1210 - - 1487 2155
upper 334 - 409 mm
lower 585 - 595 mm
1 hinged door
2 open niches
1 hinged door
1 adjustable shelf
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.147
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SUMB SA 195 V 1289 1346 1401 1470 1558 - - 1874 2499
Niche height D SUMB SA 195 DV 1289 1346 1401 1470 1558 - - 1874 2499
upper 450 mm
lower 585 - 595 mm
1 flap door
2 open niches
1 drawer
1 deep drawer
Tall unit for appliances SUMB 2A 195 V 1313 1370 1425 1494 1582 - - 1898 2523
Niche height D SUMB 2A 195 DV 1313 1370 1425 1494 1582 - - 1898 2523
upper 450 mm
lower 585 - 595 mm
1 flap door
2 open niches
2 deep drawers
Tall unit for appliances SUMB 195 V 1027 1080 1139 1200 1269 - - 1518 2132
Niche height D SUMB 195 DV 1027 1080 1139 1200 1269 - - 1518 2132
upper 450 mm
lower 585 - 595 mm
1 flap door
2 open niches
1 hinged door
1 adjustable shelf
Tall unit for appliances SULB 2A 195 V 1660 1740 1807 1888 1978 - - 2403 3128
for free standing microwave D SULB 2A 195 DV 1660 1740 1807 1888 1978 - - 2403 3128
max. 495 mm wide, 330 mm high behind
lift-up door
niche height 585 - 595 mm
1 flap door
1 lift-up door
1 open niche
2 deep drawers
10.148 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SULB 195 V 1378 1441 1515 1590 1672 - - 2022 2734
for free standing microwave D SULB 195 DV 1378 1441 1515 1590 1672 - - 2022 2734
max. 495 mm wide, 330 mm high behind
lift-up door
niche height 585 - 595 mm
1 flap door
1 lift-up door
1 open niche
1 hinged door
1 adjustable shelf
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.149
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Infill panel for tall units SBF 15 195 V 205 223 241 260 278 - - 360 426
Finish in continuous door material
fitted between wall and carcase
Corner infill panel for tall units SEBF 20 195 V V 398 415 435 450 469 - - 564 697
Finish in continuous door material
For variable planning dimensions
for 90° corner solution
Min. dimension 50 mm per side.
max. 180 mm on carcase front edge per
leg
Side cladding RBS 195 H 759 829 899 969 1780 - - 2092 2093
Finish in door material
for mounting on the carcase side
50 mm wide
for carcase depth 560 mm
Height- and depth-variable side RBSS VH 776 850 924 996 1900 - - 2329 2357
panelling
for mounting on the carcase side
50 mm wide
Finish in door material
Depth variable from 100 to 752 mm
Height variable from 777 to 1946 mm
10.150 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit S 30 156 V 765 856 932 975 1016 - - 1294 1561
S 45 156 V 811 903 975 1018 1067 - - 1356 1832
2 hinged doors S 50 156 V 822 916 985 1028 1079 - - 1373 1923
1 fixed shelf
4 adjustable shelves S 60 156 V 864 951 1025 1078 1133 - - 1423 2108
Tall unit D S 30 156 DV 765 856 932 975 1617 - - 1294 1561
D S 45 156 DV 811 903 975 1018 1668 - - 1356 1832
same as above, but S 50 156 DV 822 916 985 1028 1748 - - 1373 1923
1 full-height hinged door D
D S 60 156 DV 864 951 1025 1078 1837 - - 1423 2108
Only available in ALNOSTAR PLAN, ALNO-
STAR DUR, ALNOSTAR FINE, ALNOSTAR
SUND, ALNOSTAR SIGN, ALNOSTAR
GRAND, ALNOSTAR CLASS, ALNOSTAR
STRUCT.
Tall unit S 30 156 1 V 765 842 909 969 1034 - - 1259 1556
S 45 156 1 V 809 889 959 1023 1093 - - 1329 1827
1 door (dowelled) S 50 156 1 V 820 898 967 1037 1107 - - 1354 1909
1 fixed shelf
3 adjustable shelves S 60 156 1 V 855 931 1005 1082 1158 - - 1427 2093
Tall unit for broom SB 60 156 V 967 1054 1128 1181 1236 - - 1526 2206
1 door (dowelled)
1 hook for brooms
1 holder for vacuum cleaner hose
1 hook rail
2 runners for adjustable wire baskets
3 wire baskets
Tall unit for broom D SB 60 156 DV 967 1054 1128 1181 1940 - - 1526 2206
same as above, but
1 full-height hinged door
Tall unit for broom SB 60 156 1 V 958 1034 1108 1185 1261 - - 1530 2191
1 door (dowelled)
1 hook for brooms
1 holder for vacuum cleaner hose
1 hook rail
2 runners for adjustable wire baskets
3 wire baskets
10.151
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for provisions SIA 30 156 V 1695 1786 1863 1905 1946 - - 2225 2446
SIA 45 156 V 1738 1830 1902 1945 1994 - - 2283 2712
1 door (dowelled) SIA 50 156 V 1753 1847 1918 1959 2010 - - 2304 2807
5 interior deep drawers
SIA 60 156 V 1792 1879 1953 2006 2061 - - 2351 2992
Must not be placed directly alongside
the wall.
Tall unit for provisions D SIA 30 156 DV 1695 1786 1863 1905 2547 - - 2225 2446
D SIA 45 156 DV 1738 1830 1902 1945 2647 - - 2283 2712
same as above, but SIA 50 156 DV 1753 1847 1918 1959 2680 - - 2304 2807
1 full-height hinged door D
D SIA 60 156 DV 1792 1879 1953 2006 2765 - - 2351 2992
Only available in ALNOSTAR PLAN, ALNO-
STAR DUR, ALNOSTAR FINE, ALNOSTAR
SUND, ALNOSTAR SIGN, ALNOSTAR
GRAND, ALNOSTAR CLASS, ALNOSTAR
STRUCT.
Tall unit for provisions SA 30 156 VAK 1646 1744 1817 1859 1901 - - 2176 2403
1 pull-out larder unit dowelled
with cushioned opening and closure
4 baskets
Wire basket finish anthracite grey
Matching accessories:
Electrically assisted opening ZAZ 18
Order Orgaset ZI 3011 AG and ZI 3012 AG
Tall unit for provisions D SA 30 156 DVAK 1648 1725 1795 1852 2519 - - 2142 2400
same as above, but
1 pull-out larder unit
Tall unit for provisions SA 30 156 1 VAK 1648 1725 1795 1852 1919 - - 2142 2400
1 pull-out larder unit dowelled
with cushioned opening and closure
4 baskets
Wire basket finish anthracite grey
Matching accessories:
Electrically assisted opening ZAZ 18
Order Orgaset ZI 3011 AG and ZI 3012 AG
10.152
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for provisions SA 30 156 1 VA 1971 2047 2118 2175 2240 - - 2463 2702
SA 45 156 1 VA 1841 1931 2003 2045 2094 - - 2382 2816
1 pull-out larder unit dowelled
with cushioned opening and closure
4 baskets
Arena shelf finish anthracite grey
Matching accessories:
Electrically assisted opening ZAZ 18
Order Orgaset ZI 3011 AG and ZI 3012 AG
Tall unit for provisions SA 30 156 VA 1782 1880 1952 1995 2037 - - 2311 2531
SA 45 156 VA 1841 1931 2003 2045 2094 - - 2382 2816
1 pull-out larder unit dowelled
with cushioned opening and closure
4 baskets
Arena shelf finish anthracite grey
Matching accessories:
Electrically assisted opening ZAZ 18
Order Orgaset ZI 3011 AG and ZI 3012 AG
Tall unit for provisions D SA 30 156 DVA 1971 2047 2118 2175 2841 - - 2463 2702
D SA 45 156 DVA 1841 1931 2003 2045 2747 - - 2382 2816
same as above, but
1 pull-out larder unit
Corner tall unit SEKL 110 156 VA 2466 2558 2631 2672 2721 - - 3011 3407
with 45 cm door
1 door (dowelled) SEKL 115 156 VA 2548 2642 2712 2755 2806 - - 3099 3565
4 fully pivotable height adjustable with 50 cm door
carousel shelves LeMans
Arena shelf finish anthracite grey SEKL 125 156 VA 2667 2755 2829 2883 2938 - - 3227 3828
with 60 cm door
carcase width 1000 mm, without corner
infill panel
Corner infill panel for tall units SEBE 65 156 1 V 265 274 312 361 385 - - 563 615
for corner tall unit
fixed size corner infill mitred
planning dimensions 650 x 650 mm
10.153
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 88 2A 156 V 1135 1229 1297 1380 1463 - - 1807 2487
Niche height 878 mm
1 hinged appliance door
2 deep drawers
1 worktop ventilation grill
Tall unit for built-in appliance SU 102 A 156 V 954 1044 1098 1175 1257 - - 1596 2083
Niche height 1025 mm
1 hinged appliance door
1 deep drawer
1 worktop ventilation grill
Tall unit for built-in appliance SU 122 156 V 832 920 993 1047 1103 - - 1390 2076
Niche height 1225 mm
1 hinged appliance door, dowelled
1 fixed shelf
1 worktop ventilation grill
Tall unit for built-in appliance SU 122 A 156 V 955 1040 1094 1171 1287 - - 1634 2245
Niche height 1225 mm
1 hinged appliance door
1 deep drawer
1 worktop ventilation grill
Tall unit for built-in appliance SU 122 2TA 156 V 1022 1113 1183 1266 1349 - - 1694 2377
Niche height 1225 mm
2 hinged appliance doors
1 deep drawer
1 worktop ventilation grill
Tall unit for built-in appliance SU 152 156 V 834 922 997 1050 1105 - - 1394 2082
niche height 1400 - 1528 mm
1 hinged appliance door, dowelled
1 worktop ventilation grill
10.154
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance D SU 152 156 DV 834 922 997 1050 1808 - - 1394 2082
niche height 1400 - 1528 mm
1 full-height hinged appliance door
1 worktop ventilation grill
Tall unit for built-in appliance SU 145 2T 156 V 825 914 969 1046 1128 - - 1468 1958
niche height 1450 mm
2 hinged appliance doors
1 worktop ventilation grill
Tall unit for built-in appliance SU 145 2T 156 1 V 825 902 975 1053 1128 - - 1397 2064
niche height 1450 mm
2 hinged appliance doors
1 worktop ventilation grill
Tall unit for appliances SUB 88 156 V 754 815 856 912 969 - - 1149 1632
Niche height
upper 585 - 590 mm
lower 878 mm
1 open niche
1 hinged appliance door
1 worktop ventilation grill
Tall unit for appliances SUM 102 156 V 742 811 850 903 960 - - 1102 1462
Niche height
at top 450 mm
at bottom 1025 mm
1 open niche
1 hinged appliance door
1 worktop ventilation grill
10.155
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SUMK 3A 156 V 1219 1291 1343 1410 1473 - - 1843 2494
niche height 334 - 365 mm
1 open niche
3 deep drawers
Tall unit for built-in appliance SUM 3A 156 V 1252 1323 1378 1452 1531 - - 1904 2634
niche height 380 - 450 mm
1 open niche
3 deep drawers
Tall unit for built-in appliance SUB 156 V 779 840 881 937 995 - - 1174 1656
niche height 585 - 590 mm
1 open niche
1 hinged door
2 adjustable shelves
Tall unit for built-in appliance SUB S 156 V 925 982 1026 1079 1135 - - 1345 1917
niche height 585 - 590 mm
1 open niche
1 drawer
1 hinged door
2 adjustable shelves
Tall unit for built-in appliance SUB 3A 156 V 1215 1274 1324 1386 1458 - - 1771 2325
niche height 585 - 590 mm
1 open niche
3 deep drawers
Tall unit for appliances SUMKB SA 156 V 1035 1077 1103 1157 1215 - - 1425 1948
Niche height
upper 334 - 409 mm
lower 585 - 595 mm
2 open niches
1 drawer
1 deep drawer
10.156
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SUMKB 2A 156 V 1059 1102 1140 1193 1259 - - 1491 1987
Niche height
upper 334 - 409 mm
lower 585 - 595 mm
2 open niches
2 deep drawers
Tall unit for appliances SUMB A 156 V 867 905 934 982 1034 - - 1243 1776
Niche height
upper 450 mm
lower 585 - 595 mm
2 open niches
1 deep drawer
Tall unit for appliances SULB SA 156 V 1383 1442 1480 1543 1606 - - 1896 2470
for free standing microwave D SULB SA 156 DV 1383 1442 1480 1543 1606 - - 1896 2470
max. 495 mm wide, 330 mm high behind
lift-up door
niche height 585 - 595 mm
1 lift-up door
1 open niche
1 drawer
1 deep drawer
Tall unit for appliances SULB 2A 156 V 1407 1467 1517 1579 1650 - - 1962 2509
for free standing microwave D SULB 2A 156 DV 1407 1467 1517 1579 1650 - - 1962 2509
max. 495 mm wide, 330 mm high behind
lift-up door
niche height 585 - 595 mm
1 lift-up door
1 open niche
2 deep drawers
10.157
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Infill panel for tall units SBF 15 156 V 201 214 230 247 263 - - 338 399
Finish in continuous door material
fitted between wall and carcase
Corner infill panel for tall units SEBF 20 156 V V 392 410 428 446 463 - - 560 689
Finish in continuous door material
For variable planning dimensions
for 90° corner solution
Min. dimension 50 mm per side.
max. 180 mm on carcase front edge per
leg
Side cladding RBS 156 H 598 657 710 768 1409 - - 1650 1804
Finish in door material
for mounting on the carcase side
50 mm wide
for carcase depth 578 mm
Height- and depth-variable side RBSS VH 776 850 924 996 1900 - - 2329 2357
panelling
for mounting on the carcase side
50 mm wide
Finish in door material
Depth variable from 100 to 752 mm
Height variable from 777 to 1946 mm
10.158
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit S 30 130 V 691 757 795 835 898 - - 1097 1299
S 45 130 V 722 791 830 887 957 - - 1191 1532
1 hinged door S 50 130 V 729 798 837 900 977 - - 1217 1603
3 adjustable shelves
S 60 130 V 755 824 864 923 1019 - - 1281 1755
Tall unit for broom SB 60 130 V 870 939 978 1037 1133 - - 1396 1865
1 hinged door
1 hook for brooms
1 holder for vacuum cleaner hose
1 hook rail
2 runners for adjustable wire baskets
3 wire baskets
Tall unit for provisions SIA 30 130 V 1448 1516 1552 1594 1655 - - 1854 2021
SIA 45 130 V 1479 1547 1587 1645 1715 - - 1948 2253
1 hinged door SIA 50 130 V 1486 1554 1595 1656 1734 - - 1974 2325
4 interior drawers
SIA 60 130 V 1513 1582 1622 1681 1777 - - 2040 2477
Must not be placed directly alongside
the wall.
Tall unit for provisions SA 30 130 VAK 1573 1640 1677 1719 1781 - - 1979 2142
1 pull-out larder unit
3 baskets
Wire basket finish anthracite grey
Matching accessories:
Electrically assisted opening ZAZ 18
Order Orgaset ZI 3011 AG and ZI 3012 AG
Tall unit for provisions SA 30 130 VA 1691 1758 1795 1838 1899 - - 2097 2254
SA 45 130 VA 1739 1806 1847 1905 1976 - - 2208 2502
same as above, but
Arena shelf finish anthracite grey
Corner tall unit SEKL 110 130 VA 2374 2442 2483 2540 2609 - - 2843 3106
with 45 cm door
1 hinged door SEKL 115 130 VA 2454 2521 2562 2623 2701 - - 2941 3247
4 fully pivotable height adjustable with 50 cm door
carousel shelves LeMans
Arena shelf finish anthracite grey SEKL 125 130 VA 2559 2629 2667 2727 2823 - - 3086 3474
with 60 cm door
carcase width 1000 mm, without corner
infill panel
Corner infill panel SEBE 65 130 1 V 227 237 274 324 348 - - 489 539
for corner tall unit
fixed size corner infill mitred
planning dimensions 650 x 650 mm
10.159
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 88 130 V 735 805 845 904 1000 - - 1262 1737
Niche height 878 mm
1 appliance door
1 worktop ventilation grill
Tall unit for built-in appliance SU 88 A 130 V 918 996 1049 1115 1176 - - 1436 1979
Niche height 878 mm
1 hinged appliance door
1 deep drawer
1 worktop ventilation grill
Tall unit for built-in appliance SU 102 A 130 V 929 1016 1069 1139 1218 - - 1443 1941
Niche height 1025 mm
1 hinged appliance door
1 deep drawer
1 worktop ventilation grill
Tall unit for built-in appliance SU 122 130 V 715 784 823 882 978 - - 1240 1716
Niche height 1225 mm
1 hinged appliance door
1 worktop ventilation grill
Tall unit for built-in appliance SU 122 2T 130 V 797 872 927 992 1055 - - 1316 1863
Niche height 1225 mm
2 hinged appliance doors
1 worktop ventilation grill
Tall unit for built-in appliance SUMK 130 V 748 808 850 906 962 - - 1142 1625
niche height 334 - 365 mm
1 open niche
1 hinged door
2 adjustable shelves
10.160
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SUMK S 2A 130 V 1183 1242 1280 1345 1408 - - 1698 2282
niche height 334 - 365 mm
1 open niche
1 drawer
2 deep drawers
Tall unit for built-in appliance SUM 2A 130 V 1003 1053 1089 1136 1182 - - 1440 1906
niche height 380 - 450 mm
1 open niche
2 deep drawers
Tall unit for built-in appliance SUM 130 V 730 779 821 857 897 - - 1073 1527
niche height 380 - 450 mm
1 open niche
1 hinged door
2 adjustable shelves
Tall unit for built-in appliance SUB 130 V 719 746 785 826 869 - - 1022 1428
niche height 585 - 590 mm
1 open niche
1 hinged door
1 adjustable shelf
Tall unit for built-in appliance SUB 2SA 130 V 1153 1197 1222 1284 1347 - - 1558 2073
niche height 585 - 590 mm
1 open niche
2 drawers
1 deep drawer
Tall unit for built-in appliance SUB 2A 130 V 1001 1044 1079 1125 1175 - - 1404 1823
niche height 585 - 590 mm
1 open niche
2 deep drawers
10.161
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SUMKB A 130 V 836 864 886 923 968 - - 1116 1475
Niche height
upper 334 - 409 mm
lower 585 - 595 mm
2 open niches
1 deep drawer
Tall unit for appliances SUMB S 130 V 811 830 842 877 918 - - 1015 1354
Niche height
upper 450 mm
lower 585 - 595 mm
2 open niches
1 drawer
Infill panel for tall units SBF 15 130 V 193 206 221 236 249 - - 313 367
Finish in door material
fitted between wall and carcase
Corner infill panel for tall units SEBF 20 130 V V 389 407 424 442 460 - - 555 664
Finish in continuous door material
For variable planning dimensions
for 90° corner solution
Min. dimension 50 mm per side.
max. 180 mm on carcase front edge per
leg
Side cladding RBS 130 1 H 572 621 670 720 1263 - - 1470 1519
Finish in door material
for mounting on the carcase side
50 mm wide
for carcase depth 578 mm
Height- and depth-variable side RBSS VH 776 850 924 996 1900 - - 2329 2357
panelling
for mounting on the carcase side
50 mm wide
Finish in door material
Depth variable from 100 to 752 mm
Height variable from 777 to 1946 mm
10.162
à
Information on ALNO tall units for built-in appliances
S72
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit S 30 221 MV 1015 1148 1227 1315 1401 - - 1792 2117
S 45 221 MV 1073 1208 1286 1387 1491 - - 1896 2413
1 flap door S 50 221 MV 1092 1229 1317 1412 1516 - - 1939 2538
2 fixed shelves
1 hinged door S 60 221 MV 1148 1272 1363 1464 1577 - - 2029 2814
3 adjustable shelves
1 hinged door
1 adjustable shelf
Tall unit for provisions S2A 60 221 MV 1413 1537 1628 1729 1842 - - 2294 3079
1 flap door
2 fixed shelves
1 hinged door
3 adjustable shelves
2 deep drawers
Tall unit for broom SB 30 221 MV 1155 1288 1367 1455 1542 - - 1933 2250
SB 45 221 MV 1212 1347 1425 1527 1631 - - 2035 2546
1 flap door SB 50 221 MV 1232 1368 1456 1550 1655 - - 2079 2669
1 door (dowelled)
2 fixed shelves SB 60 221 MV 1286 1411 1501 1601 1716 - - 2168 2946
1 hook for brooms
1 holder for vacuum cleaner hose
1 hook rail
2 runners for adjustable wire baskets
3 wire baskets
Tall unit for provisions SA 30 221 MVAK 2006 2141 2220 2307 2396 - - 2783 3065
1 flap door
1 pull-out larder unit
5 baskets
Wire basket finish anthracite grey
1 fixed shelf
Matching accessories:
Electrically assisted opening ZAZ 18
Order Orgaset ZI 3011 AG and ZI 3012 AG
Tall unit for provisions SA 30 221 MVA 2206 2341 2419 2507 2596 - - 2984 3252
SA 45 221 MVA 2288 2424 2502 2601 2706 - - 3111 3573
same as above, but
Arena shelf finish anthracite grey
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.163
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for provisions SIA 30 221 MV 1933 2063 2144 2233 2318 - - 2709 2989
SIA 45 221 MV 1982 2118 2197 2296 2402 - - 2806 3277
1 flap door SIA 50 221 MV 2004 2143 2229 2324 2430 - - 2852 3406
2 hinged doors
2 fixed shelves SIA 60 221 MV 2057 2184 2273 2375 2487 - - 2939 3680
5 interior deep drawers
Tall unit for provisions ST 60 221 MVA 2105 2229 2320 2421 2534 - - 2986 3771
1 flap door
1 door (dowelled)
1 fixed shelf
1 swing-out mechanism with
4 fixed baskets
1 Orgaset
5 adjustable shelves shortened in depth
Load-bearing capacity of baskets in the
door: 4 kg each
Tall unit for provisions SM 60 221 MVA 3232 3357 3448 3548 3662 - - 4114 4796
1 flap door
1 door (dowelled)
1 fixed shelf
1 swing-out mechanism with
4 fixed baskets
1 Orgaset
1 swing-out mechanism with
5 adjustable baskets
Tall unit for built-in appliance SU 88 221 MV 1081 1208 1315 1413 1508 - - 1898 2861
Niche height 878 mm
1 hinged door
1 adjustable shelf
1 appliance door
1 hinged door
1 adjustable shelf
10.164 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 88 2A 221 MV 1344 1472 1573 1683 1784 - - 2255 3230
Niche height 878 mm
1 hinged door
1 adjustable shelf
1 hinged appliance door
2 deep drawers
Tall unit for built-in appliance SU 88 S2A 221 MV 1518 1648 1750 1875 1997 - - 2472 3517
Niche height 878 mm
1 hinged door
1 adjustable shelf
1 appliance door
1 drawer
2 deep drawers
Servodrive assisted opening is available
for appliance hinged door at
MPS SERVO KS surcharge.
Tall unit for built-in appliance SU 88 ISIA 221 MV 1733 1860 1967 2065 2160 - - 2550 3513
Niche height 878 mm
1 hinged door
1 adjustable shelf
1 appliance door
1 hinged door
1 internal drawer
2 interior deep drawers
Tall unit for built-in appliance SU 102 221 MV 1083 1203 1309 1418 1529 - - 1890 2808
Niche height 1025 mm
1 flap door
1 appliance door
1 hinged door
1 adjustable shelf
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.165
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 102 2A 221 MV 1356 1491 1593 1707 1826 - - 2261 3192
Niche height 1025 mm
1 flap door
1 appliance door
2 deep drawers
Tall unit for built-in appliance SU 122 A 221 MV 1160 1279 1367 1471 1605 - - 2079 2988
Niche height 1225 mm
1 hinged door
1 adjustable shelf
1 hinged appliance door, dowelled
1 deep drawer
Tall unit for built-in appliance SU 122 2TA221MV 1236 1362 1466 1574 1677 - - 2147 3127
Niche height 1225 mm
1 hinged door
1 adjustable shelf
2 hinged appliance doors
1 deep drawer
Servodrive assisted opening is available
for appliance hinged door at
MPS SERVO KS surcharge.
Tall unit for built-in appliance SU 140 221 MV 1078 1185 1295 1379 1465 - - 1872 2855
Niche height 1400 mm
1 hinged door
2 adjustable shelves
1 hinged appliance door, dowelled
10.166 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 1452T 2212MV 1052 1176 1278 1387 1498 - - 1924 2739
niche height 1450 mm
1 hinged door
1 adjustable shelf
2 hinged appliance doors
Tall unit for built-in appliance SU 159 221 MV 1055 1181 1288 1386 1481 - - 1872 2838
niche height 1590 mm
1 hinged door
1 adjustable shelf
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 159 2T 221 MV 1055 1181 1288 1386 1481 - - 1872 2837
same as above, but
2 hinged appliance doors
Tall unit for built-in appliance SU 178 221 MV 959 1066 1157 1265 1379 - - 1835 2628
Niche height 1780 mm
1 flap door
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 178 2T 221 MV 1032 1166 1259 1356 1458 - - 1853 2751
same as above, but
2 hinged appliance doors
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.167
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SU 88 88 221 MV 1033 1164 1256 1366 1473 - - 1878 2801
Niche height
upper 878 mm
lower 878 mm
1 flap door
2 hinged appliance doors
Tall unit for appliances SUB 221 MV 1035 1127 1206 1268 1334 - - 1653 2452
D SUB 221 MDV 1035 1127 1206 1268 1334 - - 1653 2452
niche height 585 - 595 mm
1 hinged door
2 adjustable shelves
1 fixed panel
1 open niche
1 hinged door
1 adjustable shelf
Tall unit for appliances SUB 2A 221 MV 1302 1394 1468 1541 1615 - - 2013 2823
D SUB 2A 221 MDV 1302 1394 1468 1541 1615 - - 2013 2823
niche height 585 - 595 mm
1 hinged door
2 adjustable shelves
1 fixed panel
1 open niche
2 deep drawers
Tall unit for appliances SUB S2A 221 1MV 1492 1588 1662 1750 1844 - - 2248 3124
D SUB S2A 221 1MDV 1492 1588 1662 1750 1844 - - 2248 3124
niche height 585 - 595 mm
1 hinged door
2 adjustable shelves
1 fixed panel
1 open niche
1 drawer
2 deep drawers
10.168 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SUB ISIA 221 MV 1687 1779 1858 1920 1986 - - 2305 3104
D SUB ISIA 221 MDV 1687 1779 1858 1920 1986 - - 2305 3104
niche height 585 - 595 mm
1 hinged door
2 adjustable shelves
1 fixed panel
1 open niche
1 hinged door
1 internal drawer
2 interior deep drawers
Tall unit for appliances SUMKB 221 MV 1033 1093 1171 1245 1323 - - 1607 2386
D SUMKB 221 MDV 1033 1093 1171 1245 1323 - - 1607 2386
Niche height
upper 334-365 mm
lower 585-595 mm
1 hinged door
1 adjustable shelf
2 open niches
1 hinged door
1 adjustable shelf
Tall unit for appliances SUMKB 2A 221 MV 1319 1382 1456 1539 1635 - - 1986 2776
D SUMKB 2A 221 MDV 1319 1382 1456 1539 1635 - - 1986 2776
Niche height
upper 334-365 mm
lower 585-595 mm
1 hinged door
1 adjustable shelf
2 open niches
2 deep drawers
Tall unit for appliances SUMB 221 MV 1024 1091 1166 1235 1305 - - 1569 2300
D SUMB 221 MDV 1024 1091 1166 1235 1305 - - 1569 2300
Niche height
top 380 - 450 mm
bottom 585 - 595 mm
1 hinged door
1 adjustable shelf
2 open niches
1 hinged door
1 adjustable shelf
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.169
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SUMB SA 221 MV 1285 1356 1426 1505 1594 - - 1924 2667
D SUMB SA 221 MDV 1285 1356 1426 1505 1594 - - 1924 2667
Niche height
top 380 - 450 mm
bottom 585 - 595 mm
1 hinged door
1 adjustable shelf
2 open niches
1 drawer
1 deep drawer
Tall unit for appliances SUMB 2A 221 MV 1309 1380 1450 1529 1618 - - 1948 2691
D SUMB 2A 221 MDV 1309 1380 1450 1529 1618 - - 1948 2691
Niche height
top 380 - 450 mm
bottom 585 - 595 mm
1 hinged door
1 adjustable shelf
2 open niches
2 deep drawers
Tall unit for appliances SULB 221 MV 1374 1450 1539 1624 1706 - - 2071 2899
D SULB 221 MDV 1374 1450 1539 1624 1706 - - 2071 2705
for free standing microwave
max. 495 mm wide, 330 mm high behind
lift-up door
niche height 585 - 595 mm
1 hinged door
1 adjustable shelf
1 lift-up door
1 fixed panel
1 open niche
1 hinged door
1 adjustable shelf
Tall unit for appliances SULB 2A 221 MV 1653 1747 1831 1921 2010 - - 2449 3291
D SULB 2A 221 MDV 1653 1747 1831 1921 2010 - - 2449 3291
for free standing microwave
max. 495 mm wide, 330 mm high behind
lift-up door
niche height 585 - 595 mm
1 hinged door
1 adjustable shelf
1 lift-up door
1 fixed panel
1 open niche
2 deep drawers
10.170 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Infill panel for tall units SBF 15 221 V 231 248 267 285 305 - - 389 461
Finish in continuous door material
split above 780 mm for the following
ranges: Fronts with horizontal graining in
ALNOSTAR PLAN.
fitted between wall and carcase
Corner infill panel for tall units SEBF 20 221 V V 451 470 487 506 526 - - 627 780
Finish in continuous door material
split above 780 mm for the following
ranges: Fronts with horizontal graining in
ALNOSTAR PLAN.
For variable planning dimensions
for 90° corner solution
Min. dimension 50 mm per side.
max. 180 mm on carcase front edge per
leg
Side cladding RBS 221 MH 783 863 936 1017 1928 - - 2273 2326
Finish in door material
split above 715 mm for the following
ranges: Fronts with horizontal graining in
ALNOSTAR PLAN.
for mounting on the carcase side
50 mm wide
for carcase depth 560 mm
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.171
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit S 30 208 MV 924 1036 1112 1175 1257 - - 1595 1939
S 45 208 MV 969 1082 1159 1237 1331 - - 1710 2297
1 door (dowelled) S 50 208 MV 984 1100 1175 1258 1361 - - 1747 2417
1 fixed shelf
4 adjustable shelves S 60 208 MV 1027 1140 1217 1303 1426 - - 1833 2659
1 hinged door
Tall unit for provisions S2A 60 208 MV 1292 1405 1482 1568 1691 - - 2098 2924
1 door (dowelled)
2 adjustable shelves
2 fixed shelves
2 deep drawers
Tall unit for broom SB 30 208 MV 1006 1119 1194 1257 1339 - - 1677 2017
SB 45 208 MV 1050 1163 1240 1319 1412 - - 1791 2375
1 hinged door SB 50 208 MV 1067 1181 1257 1340 1443 - - 1829 2495
1 door (dowelled)
1 fixed shelf SB 60 208 MV 1106 1219 1295 1381 1505 - - 1911 2734
1 hook for brooms
1 holder for vacuum cleaner hose
1 hook rail
2 runners for adjustable wire baskets
3 wire baskets
Tall unit for provisions SA 30 208 MVAK 1798 1916 1988 2051 2135 - - 2469 2777
1 pull-out larder unit dowelled
with cushioned opening and closure
5 baskets
Wire basket finish anthracite grey
Matching accessories:
Electrically assisted opening ZAZ 18
Order Orgaset ZI 3011 AG and ZI 3012 AG
Tall unit for provisions SA 30 208 MVA 1999 2115 2188 2252 2335 - - 2669 2964
SA 45 208 MVA 2083 2195 2273 2351 2446 - - 2822 3363
same as above, but
Arena shelf finish anthracite grey
10.172 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for provisions SIA 30 208 MV 1843 1955 2031 2094 2176 - - 2513 2812
SIA 45 208 MV 1878 1992 2069 2147 2241 - - 2619 3162
1 door (dowelled) SIA 50 208 MV 1895 2009 2085 2169 2272 - - 2657 3283
1 fixed shelf
1 hinged door SIA 60 208 MV 1938 2051 2128 2213 2337 - - 2745 3525
5 interior deep drawers
Tall unit for provisions ST 60 208 MVA 1984 2097 2174 2260 2383 - - 2790 3616
1 door (dowelled)
1 swing-out mechanism with
4 fixed baskets
1 Orgaset
5 adjustable shelves shortened in depth
Tall unit for provisions SM 60 208 MVA 3135 3248 3324 3411 3534 - - 3941 4663
1 door (dowelled)
1 adjustable shelf
1 swing-out mechanism with
4 fixed baskets
1 Orgaset
1 swing-out mechanism with
5 adjustable baskets
Tall unit for built-in appliance SU 88 208 MV 1042 1161 1254 1345 1435 - - 1841 2740
Niche height 878 mm
1 hinged door
1 appliance door
1 hinged door
1 adjustable shelf
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.173
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 88 ISIA 208 MV 1694 1813 1906 1997 2087 - - 2493 3392
Niche height 878 mm
1 hinged door
1 appliance door
1 hinged door
1 internal drawer
2 interior deep drawers
Tall unit for built-in appliance SU 88 2A 208 MV 1307 1427 1515 1618 1715 - - 2200 3111
Niche height 878 mm
1 hinged door
1 appliance door
2 deep drawers
Tall unit for built-in appliance SU 88 S2A 208 MV 1485 1608 1696 1815 1932 - - 2423 3402
Niche height 878 mm
1 hinged door
1 appliance door
1 drawer
2 deep drawers
Tall unit for built-in appliance SU 102 208 MV 1044 1156 1248 1350 1457 - - 1832 2686
Niche height 1025 mm
1 hinged appliance door, dowelled
1 hinged door
1 adjustable shelf
10.174 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 102 2A 208 MV 1319 1447 1534 1642 1755 - - 2206 3072
Niche height 1025 mm
1 hinged appliance door, dowelled
2 deep drawers
Tall unit for built-in appliance SU 122 A 208 MV 1123 1234 1308 1405 1535 - - 2024 2868
Niche height 1225 mm
1 hinged door
1 hinged appliance door, dowelled
1 deep drawer
Tall unit for built-in appliance SU 122 2TA208MV 1171 1289 1378 1480 1578 - - 2063 2980
Niche height 1225 mm
1 hinged door
2 hinged appliance doors
1 deep drawer
Tall unit for built-in appliance SU 140 208 MV 1043 1129 1239 1327 1417 - - 1803 2746
Niche height 1400 mm
1 hinged door
1 adjustable shelf
1 hinged appliance door, dowelled
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.175
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 1452T 2082MV 1026 1143 1231 1333 1440 - - 1880 2629
niche height 1450 mm
1 hinged door
2 hinged appliance doors
Tall unit for built-in appliance SU 159 208 MV 1005 1124 1217 1308 1398 - - 1803 2705
niche height 1590 mm
1 hinged door
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 159 2T 208 MV 1018 1136 1229 1321 1411 - - 1817 2716
same as above, but
2 hinged appliance doors
Tall unit for built-in appliance SU 178 208 MV 1021 1123 1213 1320 1439 - - 1870 2615
niche height 1790 mm
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 178 2T 208 MV 942 1055 1131 1218 1341 - - 1748 2577
same as above, but
2 hinged appliance doors
10.176 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 178 2T 208 8 V 1055 1182 1275 1371 1478 - - 1848 2702
Niche height 1580 mm
1 flap door
2 hinged appliance doors
Tall unit for built-in appliance SUB 208 MV 1009 1079 1157 1224 1294 - - 1592 2348
D SUB 208 MDV 1009 1079 1157 1224 1294 - - 1592 2348
niche height 585 - 595 mm
1 hinged door
1 adjustable shelf
1 fixed panel
1 open niche
1 hinged door
1 adjustable shelf
Tall unit for built-in appliance SUB 2A 208 MV 1266 1336 1409 1487 1565 - - 1943 2711
D SUB 2A 208 MDV 1266 1336 1409 1487 1565 - - 1943 2711
niche height 585 - 595 mm
1 hinged door
1 adjustable shelf
1 fixed panel
1 open niche
2 deep drawers
Tall unit for built-in appliance SUB S2A 208 1MV 1467 1540 1613 1706 1804 - - 2187 3022
D SUB S2A 208 1MDV 1467 1540 1613 1706 1804 - - 2187 3022
niche height 585 - 595 mm
1 hinged door
1 adjustable shelf
1 fixed panel
1 open niche
1 drawer
2 deep drawers
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.177
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SUB ISIA 208 MV 1661 1731 1809 1876 1946 - - 2244 3000
niche height 585 - 595 mm D SUB ISIA 208 MDV 1661 1731 1809 1876 1946 - - 2244 3000
1 hinged door
1 adjustable shelf
1 fixed panel
1 open niche
1 hinged door
1 internal drawer
2 interior deep drawers
Tall unit for appliances SUMKB 208 MV 1023 1091 1166 1235 1306 - - 1572 2309
D SUMKB 208 MDV 1023 1091 1166 1235 1306 - - 1572 2309
Niche height
upper 334-365 mm
lower 585-595 mm
1 hinged door
1 adjustable shelf
2 open niches
1 hinged door
1 adjustable shelf
Tall unit for appliances SUMKB 2A 208 MV 1311 1382 1454 1532 1622 - - 1954 2704
D SUMKB 2A 208 MDV 1311 1382 1454 1532 1622 - - 1954 2704
Niche height
upper 334-365 mm
lower 585-595 mm
1 hinged door
1 adjustable shelf
2 open niches
2 deep drawers
Tall unit for appliances SUMB 208 MV 960 1017 1078 1143 1211 - - 1499 2191
D SUMB 208 MDV 983 1043 1103 1166 1230 - - 1508 2174
Niche height
top 380 - 450 mm
bottom 585 - 595 mm
1 hinged door
2 open niches
1 hinged door
1 adjustable shelf
10.178 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SUMB SA 208 MV 1247 1309 1366 1437 1521 - - 1866 2543
D SUMB SA 208 MDV 1247 1309 1366 1437 1521 - - 1866 2543
Niche height
top 380 - 450 mm
bottom 585 - 595 mm
1 hinged door
2 open niches
1 drawer
1 deep drawer
Tall unit for appliances SUMB 2A 208 MV 1271 1333 1390 1461 1545 - - 1890 2567
D SUMB 2A 208 MDV 1271 1333 1390 1461 1545 - - 1890 2567
Niche height
top 380 - 450 mm
bottom 585 - 595 mm
1 hinged door
2 open niches
2 deep drawers
The aperture size may be adjusted with
infill panel in door material.
Tall unit for appliances SULB 208 MV 1334 1404 1478 1556 1633 - - 2011 2776
D SULB 208 MDV 1444 1511 1585 1665 1743 - - 2121 2875
for free standing microwave
max. 495 mm wide, 330 mm high behind
lift-up door
niche height 585 - 595 mm
1 hinged door
1 lift-up door
1 fixed panel
1 open niche
1 hinged door
1 adjustable shelf
Tall unit for appliances SULB 2A 208 MV 1619 1704 1774 1856 1942 - - 2396 3171
D SULB 2A 208 MDV 1619 1704 1774 1856 1942 - - 2396 3171
for free standing microwave
max. 495 mm wide, 330 mm high behind
lift-up door
niche height 585 - 595 mm
1 hinged door
1 lift-up door
1 fixed panel
1 open niche
2 deep drawers
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.179
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Infill panel for tall units SBF 15 208 V 219 237 255 275 294 - - 377 444
Finish in continuous door material
split above 780 mm for the following
ranges: Fronts with horizontal graining in
ALNOSTAR PLAN.
fitted between wall and carcase
Corner infill panel for tall units SEBF 20 208 V V 418 439 457 473 493 - - 590 729
Finish in continuous door material
split above 780 mm for the following
ranges: Fronts with horizontal graining in
ALNOSTAR PLAN.
For variable planning dimensions
for 90° corner solution
Min. dimension 50 mm per side.
Max. 180 mm at the carcase front edge
per side.
Side cladding RBS 208 MH 769 846 918 992 1854 - - 2182 2211
Finish in door material
split above 715 mm for the following
ranges: Fronts with horizontal graining in
ALNOSTAR PLAN.
for mounting on the carcase side
50 mm wide
for carcase depth 560 mm
10.180 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit S 30 195 MV 852 968 1033 1106 1173 - - 1493 1704
S 45 195 MV 898 1015 1081 1165 1248 - - 1584 1987
1 hinged door S 50 195 MV 910 1028 1100 1182 1266 - - 1603 2070
3 adjustable shelves
1 fixed shelf S 60 195 MV 958 1070 1144 1229 1322 - - 1693 2348
1 hinged door
1 adjustable shelf
Tall unit for provisions S2A 60 195 MV 1223 1335 1409 1494 1587 - - 1958 2613
1 hinged door
3 adjustable shelves
1 fixed shelf
2 deep drawers
Tall unit for broom SB 30 195 MV 981 1098 1163 1235 1303 - - 1623 1828
SB 45 195 MV 1025 1142 1209 1292 1376 - - 1712 2109
1 door (dowelled) SB 50 195 MV 1046 1163 1234 1318 1400 - - 1738 2198
1 fixed shelf
1 hook for brooms SB 60 195 MV 1084 1196 1271 1356 1448 - - 1820 2468
1 holder for vacuum cleaner hose
1 hook rail
2 runners for adjustable wire baskets
3 wire baskets
Tall unit for provisions SA 30 195 MVAK 1760 1880 1944 2015 2085 - - 2402 2574
1 pull-out larder unit dowelled
with cushioned opening and closure
5 baskets
Wire basket finish anthracite grey
Matching accessories:
Electrically assisted opening ZAZ 18
Order Orgaset ZI 3011 AG and ZI 3012 AG
Tall unit for provisions SA 30 195 MVA 1979 2099 2162 2234 2304 - - 2621 2781
SA 45 195 MVA 2041 2157 2224 2306 2390 - - 2725 3080
same as above, but
Arena shelf finish anthracite grey
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.181
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for provisions SIA 30 195 MV 1816 1931 1997 2070 2136 - - 2456 2620
SIA 45 195 MV 1855 1973 2040 2123 2206 - - 2543 2898
1 hinged door SIA 50 195 MV 1871 1988 2059 2143 2226 - - 2563 2984
1 adjustable shelf
1231 1 fixed shelf SIA 60 195 MV 1917 2028 2102 2187 2280 - - 2651 3259
1 hinged door
5 interior deep drawers
Tall unit for provisions ST 60 195 MVA 1915 2027 2101 2186 2279 - - 2650 3305
1 door (dowelled)
1 swing-out mechanism with
4 fixed baskets
1 Orgaset
5 adjustable shelves shortened in depth
Tall unit for provisions SM 60 195 MVA 3113 3224 3299 3384 3476 - - 3847 4396
1 door (dowelled)
1 swing-out mechanism with
4 fixed baskets
1 Orgaset
1 swing-out mechanism with
5 adjustable baskets
Tall unit for built-in appliance SU 88 195 MV 1084 1197 1289 1378 1473 - - 1849 2696
Niche height 878 mm
1 flap door
1 appliance door
1 hinged door
1 adjustable shelf
10.182 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 88 ISIA 195 MV 1736 1849 1941 2030 2125 - - 2501 3348
Niche height 878 mm
1 flap door
1 appliance door
1 hinged door
1 internal drawer 2 interior deep drawers
Tall unit for built-in appliance SU 88 2A 195 MV 1349 1463 1549 1650 1751 - - 2208 3068
Niche height 878 mm
1 flap door
1 appliance door
2 deep drawers
Tall unit for built-in appliance SU 88 S2A 195 MV 1529 1645 1732 1848 1971 - - 2432 3360
Niche height 878 mm
1 flap door
1 appliance door
1 drawer
2 deep drawers
Servodrive assisted opening is available
for appliance hinged door at
MPS SERVO KS surcharge.
Tall unit for built-in appliance SU 102 195 MV 1086 1192 1283 1383 1494 - - 1841 2643
Niche height 1025 mm
1 appliance door
1 hinged door
1 adjustable shelf
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.183
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 102 2A 195 MV 1361 1483 1570 1675 1793 - - 2215 3029
Niche height 1025 mm
1 appliance door
2 deep drawers
Tall unit for built-in appliance SU 122 A 195 MV 1165 1270 1342 1436 1572 - - 2031 2823
Niche height 1225 mm
1 flap door
1 hinged appliance door, dowelled
1 deep drawer
Tall unit for built-in appliance SU 1222TA 195MV 1241 1353 1441 1541 1643 - - 2100 2964
Niche height 1225 mm
1 flap door
2 hinged appliance doors
1 deep drawer
Tall unit for built-in appliance SU 140 195 MV 1033 1127 1233 1317 1398 - - 1766 2660
Niche height 1400 mm
1 hinged door
1 adjustable shelf
1 hinged appliance door, dowelled
10.184 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 1452T 1952MV 1081 1192 1279 1379 1490 - - 1901 2597
niche height 1450 mm
1 flap door
2 hinged appliance doors
Tall unit for built-in appliance SU 159 195 MV 1029 1068 1102 1203 1267 - - 1498 1939
niche height 1590 mm
1 flap door
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 159 2T 195 MV 1060 1173 1265 1354 1448 - - 1825 2672
same as above, but
2 hinged appliance doors
Tall unit for built-in appliance SU 178 195 MV 856 946 1022 1112 1239 - - 1623 2406
Niche height 1780 mm
1 hinged appliance door, dowelled
Tall unit for built-in appliance SU 178 2T 195 MV 921 1032 1107 1192 1284 - - 1655 2312
same as above, but
2 hinged appliance doors
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.185
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SUB 195 MV 967 1044 1119 1180 1243 - - 1521 2231
D SUB 195 MDV 967 1044 1119 1180 1243 - - 1521 2231
niche height 585 - 595 mm
1 hinged door
1 adjustable shelf
1 fixed panel
1 open niche
1 hinged door
1 adjustable shelf
Tall unit for built-in appliance SUB 2A 195 MV 1246 1325 1394 1468 1536 - - 1895 2616
D SUB 2A 195 MDV 1155 1233 1311 1429 1505 - - 1825 2646
niche height 585 - 595 mm
1 hinged door
1 adjustable shelf
1 fixed panel
1 open niche
2 deep drawers
Tall unit for built-in appliance SUB S2A 195 1MV 1439 1520 1590 1678 1769 - - 2131 2919
D SUB S2A 195 1MDV 1439 1520 1590 1678 1769 - - 2131 2919
niche height 585 - 595 mm
1 hinged door
1 adjustable shelf
1 fixed panel
1 open niche
1 drawer
2 deep drawers
Tall unit for built-in appliance SUB ISIA 195 MV 1619 1696 1771 1832 1895 - - 2173 2883
niche height 585 - 595 mm D SUB ISIA 195 MDV 1619 1696 1771 1832 1895 - - 2173 2883
1 hinged door
1 adjustable shelf
1 fixed panel
1 open niche
1 hinged door
1 internal drawer
2 interior deep drawers
Tall unit for appliances SUMKB 195 MV 964 1023 1082 1145 1210 - - 1487 2155
D SUMKB 195 MDV 1041 1079 1106 1160 1220 - - 1416 1913
Niche height
upper 334-365 mm
lower 585-595 mm
1 hinged door
2 open niches
1 hinged door
1 adjustable shelf
10.186 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SUMKB 2A 195 MV 1250 1312 1369 1440 1524 - - 1869 2547
D SUMKB 2A 195 MDV 1250 1312 1369 1440 1524 - - 1869 2547
Niche height
upper 334-365 mm
lower 585-595 mm
1 hinged door
2 open niches
2 deep drawers
Tall unit for appliances SUMB 195 MV 1027 1080 1139 1200 1269 - - 1518 2132
D SUMB 195 MDV 1027 1080 1139 1200 1269 - - 1518 2132
Niche height
top 380 - 450 mm
bottom 585 - 595 mm
1 flap door
2 open niches
1 hinged door
1 adjustable shelf
Tall unit for appliances SUMB SA 195 MV 1289 1346 1401 1470 1558 - - 1874 2499
D SUMB SA 195 MDV 1289 1346 1401 1470 1558 - - 1874 2499
Niche height
top 380 - 450 mm
bottom 585 - 595 mm
1 hinged door
2 open niches
1 drawer
1 deep drawer
Tall unit for appliances SUMB 2A 195 MV 1313 1370 1425 1494 1582 - - 1898 2523
D SUMB 2A 195 MDV 1313 1370 1425 1494 1582 - - 1898 2523
Niche height
top 380 - 450 mm
bottom 585 - 595 mm
1 flap door
2 open niches
2 deep drawers
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.187
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SULB 195 MV 1378 1441 1515 1590 1672 - - 2022 2734
D SULB 195 MDV 1378 1441 1515 1590 1672 - - 2022 2734
for free standing microwave
max. 495 mm wide, 330 mm high behind
lift-up door
niche height 585 - 595 mm
1 flap door
1 lift-up door
1 fixed panel
1 open niche
1 hinged door
1 adjustable shelf
Tall unit for appliances SULB 2A 195 MV 1660 1740 1807 1888 1978 - - 2403 3128
D SULB 2A 195 MDV 1660 1740 1807 1888 1978 - - 2403 3128
for free standing microwave
max. 495 mm wide, 330 mm high behind
lift-up door
niche height 585 - 595 mm
1 flap door
1 lift-up door
1 fixed panel
1 open niche
2 deep drawers
10.188 Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm.
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Infill panel for tall units SBF 15 195 V 205 223 241 260 278 - - 360 426
Finish in continuous door material
fitted between wall and carcase
Corner infill panel for tall units SEBF 20 195 V V 398 415 435 450 469 - - 564 697
Finish in continuous door material
For variable planning dimensions
for 90° corner solution
Min. dimension 50 mm per side.
max. 180 mm on carcase front edge per
leg
Side cladding RBS 195 H 759 829 899 969 1780 - - 2092 2093
Finish in door material
for mounting on the carcase side
50 mm wide
for carcase depth 560 mm
Height- and depth-variable side RBSS VH 776 850 924 996 1900 - - 2329 2357
panelling
for mounting on the carcase side
50 mm wide
Finish in door material
Depth variable from 100 to 752 mm
Height variable from 777 to 1946 mm
Minimum room height required in order to stand up the tall units: Plinth height + height of carcase + 60 mm. 10.189
Air vent opening for appliance units in the ceiling infill: 200 cm².
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit S 30 156 MV 765 856 932 975 1016 - - 1294 1561
S 45 156 MV 811 903 975 1018 1067 - - 1356 1832
2 hinged doors S 50 156 MV 822 916 985 1028 1079 - - 1373 1923
1 fixed shelf
3 adjustable shelves S 60 156 MV 864 951 1025 1078 1133 - - 1423 2108
Tall unit for broom SB 60 156 MV 967 1054 1128 1181 1236 - - 1526 2206
1 door (dowelled)
1 hook for brooms
1 holder for vacuum cleaner hose
1 hook rail
2 runners for adjustable wire baskets
3 wire baskets
Tall unit for provisions SA 30 156 MVAK 1646 1744 1817 1859 1901 - - 2176 2403
1 pull-out larder unit dowelled
with cushioned opening and closure
3 baskets
Wire basket finish anthracite grey
1 fixed shelf
Matching accessories:
Electrically assisted opening ZAZ 18
Order Orgaset ZI 3011 AG and ZI 3012 AG
Tall unit for provisions SA 30 156 MVA 1782 1880 1952 1995 2037 - - 2311 2531
SA 45 156 MVA 1841 1931 2003 2045 2094 - - 2382 2816
same as above, but
Arena shelf finish anthracite grey
Tall unit for provisions SIA 30 156 MV 1695 1786 1863 1905 1946 - - 2225 2446
SIA 45 156 MV 1738 1830 1902 1945 1994 - - 2283 2712
1 hinged door SIA 50 156 MV 1753 1847 1918 1959 2010 - - 2304 2807
1 fixed shelf
1 hinged door SIA 60 156 MV 1792 1879 1953 2006 2061 - - 2351 2992
5 interior deep drawers
10.190
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Corner tall unit SEKL 110 156 MVA 2466 2558 2631 2672 2721 - - 3011 3407
with 45 cm door
1 door (dowelled) SEKL 115 156 MVA 2548 2642 2712 2755 2806 - - 3099 3565
4 fully pivotable height adjustable with 50 cm door
carousel shelves LeMans
Arena shelf finish anthracite grey SEKL 125 156 MVA 2667 2755 2829 2883 2938 - - 3227 3828
with 60 cm door
carcase width 1000 mm, without corner
infill panel
Corner infill panel for tall units SEBE 65 156 MV 265 274 312 361 385 - - 563 615
for corner tall unit
fixed size corner infill mitred
planning dimensions 650 x 650 mm
Tall unit for built-in appliance SU 88 2A 156 MV 1135 1229 1297 1380 1463 - - 1807 2487
Niche height 878 mm
1 appliance door
2 deep drawers
1 worktop ventilation grill
Tall unit for built-in appliance SU 102 A 156 MV 954 1044 1098 1175 1257 - - 1596 2083
Niche height 1025 mm
1 appliance door
1 deep drawer
1 worktop ventilation grill
Tall unit for built-in appliance SU 122 156 MV 832 920 993 1047 1103 - - 1390 2076
Niche height 1225 mm
1 hinged appliance door, dowelled
1 worktop ventilation grill
10.191
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 122 A 156 V 955 1040 1094 1171 1287 - - 1634 2245
Niche height 1225 mm
1 hinged appliance door
1 deep drawer
1 worktop ventilation grill
Tall unit for built-in appliance SU 145 2T 156 V 825 914 969 1046 1128 - - 1468 1958
niche height 1450 mm
2 hinged appliance doors
1 worktop ventilation grill
Tall unit for built-in appliance SU 1452T 1561MV 825 902 975 1053 1128 - - 1397 2064
niche height 1450 mm
2 hinged appliance doors
1 worktop ventilation grill
Tall unit for built-in appliance SU 145 2T 156 1 V 825 902 975 1053 1128 - - 1397 2064
niche height 1450 mm
2 hinged appliance doors
1 worktop ventilation grill
Tall unit for appliances SUB 88 156 V 754 815 856 912 969 - - 1149 1632
Niche height
upper 585 - 590 mm
lower 878 mm
1 open niche
1 hinged appliance door
1 worktop ventilation grill
Tall unit for built-in appliance SUB 156 V 779 840 881 937 995 - - 1174 1656
niche height 585 - 590 mm
1 open niche
1 hinged door
2 adjustable shelves
10.192
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SUB S 156 MV 925 982 1026 1079 1135 - - 1345 1917
niche height 585 - 590 mm
1 fixed panel
1 open niche
1 drawer
1 hinged door
1 adjustable shelf
Tall unit for built-in appliance SUB S2A 156 MV 1121 1179 1216 1286 1357 - - 1634 2195
niche height 585 - 590 mm
1 fixed panel
1 open niche
1 drawer
2 deep drawers
Tall unit for appliances SUMKB SA 156 MV 1063 1102 1129 1184 1245 - - 1445 1952
Niche height
upper 334 - 409 mm
lower 585 - 595 mm
2 open niches
1 drawer
1 deep drawer
Tall unit for appliances SUMB SA 156 MV 960 999 1025 1079 1139 - - 1334 1838
Niche height
top 380 - 450 mm
bottom 585 - 595 mm
2 open niches
1 drawer
1 deep drawer
Tall unit for appliances SULB SA 156 MV 1424 1483 1521 1592 1665 - - 1947 2504
for free standing microwave
max. 495 mm wide, 330 mm high behind
lift-up door
niche height 585 - 595 mm
1 lift-up door
1 fixed panel
1 open niche
1 drawer
1 deep drawer
10.193
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Infill panel for tall units SBF 15 156 V 201 214 230 247 263 - - 338 399
Finish in continuous door material
fitted between wall and carcase
Corner infill panel for tall units SEBF 20 156 V V 392 410 428 446 463 - - 560 689
Finish in continuous door material
For variable planning dimensions
for 90° corner solution
Min. dimension 50 mm per side.
max. 180 mm on carcase front edge per
leg
Side cladding RBS 156 H 598 657 710 768 1409 - - 1650 1804
Finish in door material
for mounting on the carcase side
50 mm wide
for carcase depth 578 mm
Height- and depth-variable side RBSS VH 776 850 924 996 1900 - - 2329 2357
panelling
for mounting on the carcase side
50 mm wide
Finish in door material
Depth variable from 100 to 752 mm
Height variable from 777 to 1946 mm
10.194
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit S 30 130 V 691 757 795 835 898 - - 1097 1299
S 45 130 V 722 791 830 887 957 - - 1191 1532
1 hinged door S 50 130 V 729 798 837 900 977 - - 1217 1603
3 adjustable shelves
S 60 130 V 755 824 864 923 1019 - - 1281 1755
Tall unit for broom SB 60 130 V 870 939 978 1037 1133 - - 1396 1865
1 hinged door
1 hook for brooms
1 holder for vacuum cleaner hose
1 hook rail
2 runners for adjustable wire baskets
3 wire baskets
Tall unit for provisions SA 30 130 VAK 1573 1640 1677 1719 1781 - - 1979 2142
1 pull-out larder unit
3 baskets
Wire basket finish anthracite grey
Matching accessories:
Electrically assisted opening ZAZ 18
Order Orgaset ZI 3011 AG and ZI 3012 AG
Tall unit for provisions SA 30 130 VA 1691 1758 1795 1838 1899 - - 2097 2254
SA 45 130 VA 1739 1806 1847 1905 1976 - - 2208 2502
same as above, but
Arena shelf finish anthracite grey
Tall unit for provisions SIA 30 130 V 1448 1516 1552 1594 1655 - - 1854 2021
SIA 45 130 V 1479 1547 1587 1645 1715 - - 1948 2253
1 hinged door SIA 50 130 V 1486 1554 1595 1656 1734 - - 1974 2325
4 interior drawers
SIA 60 130 V 1513 1582 1622 1681 1777 - - 2040 2477
Must not be placed directly alongside
the wall.
Corner tall unit SEKL 110 130 VA 2374 2442 2483 2540 2609 - - 2843 3106
with 45 cm door
1 hinged door SEKL 115 130 VA 2454 2521 2562 2623 2701 - - 2941 3247
4 fully pivotable height adjustable with 50 cm door
carousel shelves LeMans
Arena shelf finish anthracite grey SEKL 125 130 VA 2559 2629 2667 2727 2823 - - 3086 3474
with 60 cm door
carcase width 1000 mm, without corner
infill panel
Corner infill panel SEBE 65 130 1 V 227 237 274 324 348 - - 489 539
for corner tall unit
fixed size corner infill mitred
planning dimensions 650 x 650 mm
10.195
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for built-in appliance SU 88 130 V 735 805 845 904 1000 - - 1262 1737
Niche height 878 mm
1 appliance door
1 worktop ventilation grill
Tall unit for built-in appliance SU 88 A 130 MV 918 996 1049 1115 1176 - - 1436 1979
Niche height 878 mm
1 appliance door
1 deep drawer
1 worktop ventilation grill
Tall unit for built-in appliance SU 102 130 V 735 805 845 904 1000 - - 1262 1737
Niche height 1025 mm
1 appliance door
1 worktop ventilation grill
Tall unit for built-in appliance SU 122 130 V 715 784 823 882 978 - - 1240 1716
Niche height 1225 mm
1 hinged appliance door
1 worktop ventilation grill
Tall unit for built-in appliance SU 122 2T 130 V 797 872 927 992 1055 - - 1316 1863
Niche height 1225 mm
2 hinged appliance doors
1 worktop ventilation grill
Tall unit for built-in appliance SUB 130 MV 719 746 785 826 869 - - 1022 1428
niche height 585 - 590 mm
1 fixed panel
1 open niche
1 hinged door
1 adjustable shelf
Tall unit for built-in appliance SUB 2A 130 MV 1124 1210 1284 1397 1466 - - 1766 2541
niche height 585 - 590 mm
1 fixed panel
1 open niche
2 deep drawers
10.196
VETRINA
STRUCT
ART pro
GRAND
SATINA
carcase depth 578 mm
SHAPE
CLASS
PEARL
GLINT
SUND
CERA
PLAN
PURE
SOFT
width cm
SIGN
BRIT
FINE
DUR
POL
Unit without plinth 1 2 3 4 5 6 7 8 9 10
Tall unit for appliances SUMKB A 130 V 836 864 886 923 968 - - 1116 1475
Niche height
upper 334 - 409 mm
lower 585 - 595 mm
2 open niches
1 deep drawer
Tall unit for appliances SUMB S 130 V 811 830 842 877 918 - - 1015 1354
Niche height
upper 450 mm
lower 585 - 595 mm
2 open niches
1 drawer
Infill panel for tall units SBF 15 130 V 193 206 221 236 249 - - 313 367
Finish in door material
fitted between wall and carcase
Corner infill panel for tall units SEBF 20 130 V V 389 407 424 442 460 - - 555 664
Finish in continuous door material
For variable planning dimensions
for 90° corner solution
Min. dimension 50 mm per side.
max. 180 mm on carcase front edge per
leg
Side cladding RBS 130 1 H 572 621 670 720 1263 - - 1470 1519
Finish in door material
for mounting on the carcase side
50 mm wide
for carcase depth 578 mm
10.197
10.198
high-gloss lacquer
Item
Colours and finishes see colour matrix
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Modular panel for base unit carcase 600 mm deep for 10 WUK 078 H - 851 - - 357 608 - -
height carcase depth of 560 mm
for 780 mm high base unit 600 mm deep for room 10 WUK 078 RH - 867 - - 367 619 - -
divider and
carcase depth 560 mm
Modular panel for base unit 600 mm deep for carcase 10 WU 039 FH - 795 - - 333 568 - -
depth of 578 mm
for 390 mm high base unit Edition Fly
Modular panel for wall unit 910 mm high 10 WO 091 H - 674 - - 295 481 - -
780 mm high 10 WO 078 H - 627 - - 274 448 - -
375 mm deep 650 mm high 10 WO 065 H - 593 - - 261 423 - -
520 mm high 10 WO 052 H - 547 - - 243 391 - -
390 mm high 10 WO 039 H - 513 - - 226 366 - -
Modular panel for tall unit carcase Carcase height 2210 mm 10 WSK 0221 H - 1375 - - 580 982 - -
height Carcase height 2080 mm 10 WSK 0208 H - 1281 - - 538 915 - -
Carcase height 1950 mm 10 WSK 0195 H - 1197 - - 497 855 - -
for tall unit
600 mm deep Carcase height 1560 mm 10 WSK 0156 H - 1067 - - 441 762 - -
Carcase height 1300 mm 10 WSK 0130 H - 1012 - - 421 723 - -
10.199
high-gloss lacquer
Item
Colours and finishes see colour matrix
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Height and depth adjustable modular 10 WO 02 VH - 768 - - 320 549 - -
panel
Height: 100 - 1560 mm
Depth: 100 - 375 mm
for wall units
per item
10.200
high-gloss lacquer
Item
Colours and finishes see colour matrix
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate
universal
veneer/
hinge
finish
Modular panel for base unit 600 mm deep for 16 WU 178 H 161 696 239 261 359 502 - -
carcase depth of 560 mm
for 780 mm base unit
+ plinth height 600 mm deep for room 16 WU 178 RH 165 712 249 270 367 507 - -
With panel protector in stainless-steel divider and
effect or black.
carcase depth 560 mm
750 mm deep for 16 WU 178 7 H 167 731 265 289 384 529 - -
carcase depth of 710 mm
Modular panel for base unit carcase 600 mm deep for 16 WUK 178 H 137 611 209 226 309 464 - -
height carcase depth of 560 mm
for 780 mm high base unit 600 mm deep for room 16 WUK 178 RH 141 628 219 236 318 468 - -
divider and
carcase depth 560 mm
750 mm deep for 16 WUK 178 7 H 143 649 236 254 336 486 - -
carcase depth of 710 mm
Modular panel for base unit 600 mm deep for 16 WU 172 H 161 687 238 259 354 496 - -
carcase depth of 560 mm
for 715 mm base unit + plinth height
With panel protector in stainless-steel 600 mm deep for room 16 WU 172 RH 165 704 249 269 362 499 - -
effect or black. divider and
Variable dimensions without carcase depth 560 mm
surcharge also available for
carcase height 390 mm and
357 mm.
Modular panel for base unit carcase 600 mm deep for 16 WUK 172 H 133 590 203 219 298 457 - -
height carcase depth of 560 mm
600 mm deep for room 16 WUK 172 RH 138 606 214 230 306 461 - -
for 715 mm base unit divider and
Variable dimensions without carcase depth 560 mm
surcharge also available for
carcase height 390 mm and
357 mm.
Modular panel for base unit 600 mm deep for carcase 16 WU 139 FH 90 552 161 179 288 320 - -
depth of 578 mm
for 390 mm high base unit Edition Fly
Modular panel for wall unit 910 mm high 16 WO 191 H 94 493 134 151 255 345 - -
780 mm high 16 WO 178 H 90 459 128 145 238 335 - -
375 mm deep 650 mm high 16 WO 165 H 87 436 120 138 226 324 - -
520 mm high 16 WO 152 H 81 404 115 134 210 314 - -
390 mm high 16 WO 139 H 78 378 108 123 196 304 - -
Modular panel for tall unit Carcase height 2210 mm 16 WS 1221 H 219 1061 359 454 549 781 - -
Carcase height 2080 mm 16 WS 1208 H 210 987 343 434 511 766 - -
for tall units + plinth height Carcase height 1950 mm 16 WS 1195 H 203 925 329 415 477 750 - -
600 mm deep
With panel protector in stainless-steel Carcase height 1560 mm 16 WS 1156 H 194 830 316 367 429 595 - -
effect or black. Carcase height 1300 mm 16 WS 1130 H 183 803 297 343 414 564 - -
10.201
high-gloss lacquer
Item
Colours and finishes see colour matrix
textured lacquer
lacquer HG NCS
gloss laminate
Matt lacquer/
Metal effect
width mm
Laminate