Professional Documents
Culture Documents
64 | April 2015
UltraLine
UltraLine
Evolutionary antenna
configuration that can
allow up to five (5) different
bands in one compact
arrangement. Perfect for
future-proofing a base
station site.
April 2015 | 65
790-960 / 1710-2170 / 1710-2170 / 1710-2690 MHz
6890100
6890100A 6890100G
Quad Band | Panel Antenna | XXXX-Pol | 65° / 65° / 65° / 65° | 17.5 / 17.3 / 17.3 / 18.6 dBi | Variable Tilt
•
•
•
Quad band antenna, dual polarisation, 8 connectors
Independent tilt on each band 0-10° / 0-12° / 0-12° / 0-10°
UltraLine platform with multi-array capability
UltraLine
• MET and RET versions, AISG1.1 or 3GPP/AISG2.0
• Single RET module to control all tilt angles, fully inserted inside the antenna (field replaceable)
RED Rings Extended Low Band 790-960 MHz Ports (2x) 7/16-DIN Female Long Neck
WHITE Rings Wide Band (Top Array) 1710-2170 MHz Ports (2x) 7/16-DIN Female Long Neck
BLUE Rings Wide Band (Bottom Array) 1710-2170 MHz Ports (2x) 7/16-DIN Female Ultra Long Neck
YELLOW Rings Ultra Wide Band 1710-2690 MHz Ports (2x) 7/16-DIN Female Ultra Long Neck
Electrical Characteristics Low Band (RED) High Wide Band (WHITE & BLUE) High Ultra Wide Band (YELLOW)
Frequency Bands (MHz) 790...880...960 1710...1880 1900...2170 1710...1880 1900...2170 2500...2690
Tilt 0° 16.5...17.0...17.5 16.5...16.9 16.9...17.3 17.6...17.9 17.9...18.4 18.3...18.6
Gain (dBi) Tilt Mid Value 16.5...17.0...17.5 16.4...16.7 16.7...17.2 17.5...17.7 17.7...18.2 18.0...18.2
Tilt Max Value 16.4...16.9...17.4 16.3...16.5 16.5...17.0 17.5...17.6 17.6...18.0 17.7...17.8
Input Impedance 50Ω 50Ω 50Ω
Horizontal Beamwidth (-3 dB) 66° (±6°) 67° (±3°) 64° (±4°) 67° (±3°) 64° (±4°) 60° (±3°)
Vertical Beamwidth (-3 dB) 7.3° 7.2° 6.7° 5.5° 5.0° 4.0°
Manual Electrical Tilt (MET) A coloured knob at the end of the tilt indicator allows change of the tilt without need of a tool. The knob colour
Control is identical to the corresponding connector ring colour. To access the knob, remove the cap by turning it counter-
clockwise. It is re-installed by opposite rotation. Do not remove the transparent cap(s) from the antenna.
Remote Electrical Tilt (RET) The remote control of the electrical tilt is managed by a Multi-Device Control Unit (MDCU) inserted in the bottom
Control of the antenna. A single actuator individually controls the tilt of each band (no need for daisy chain cables between
the bands). This module does not add any additional length to the antenna. For RET control, the transparent caps
must be in place and locked. The tilt angle indicators always remain visible and the antenna still has manual tilt
control (manual override).
RET Module Part Number MDCU-A0000 for AISG1.1 protocol (one unit included in 6890100A)
(one per antenna) MDCU-G0000 for 3GPP/AISG2.0 protocol (one unit included in 6890100G)
Environmental
Operating Temperature Range -40° C to +60° C
Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational
conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.
66 | April 2015
790-960 / 1710-2170 / 1710-2170 / 1710-2690 MHz
6890100
6890100A 6890100G
Quad Band | Panel Antenna | XXXX-Pol | 65° / 65° / 65° / 65° | 17.5 / 17.3 / 17.3 / 18.6 dBi | Variable Tilt
Wind load at 160 km/h Frontal: 850 N Lateral: 500 N Rear: 990 N
All mounting bracket kits are ordered separately unless otherwise indicated. Select from the options listed below.
Installation
Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational
conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.
April 2015 | 67
698-960 / 1695-2690 / 1695-2690 MHz
6880300
6880300A 6880300G
Tri Band | Panel Antenna | XXX-Pol | 65° / 65° / 65° | 17.5 / 18.5 / 18.5 dBi | Variable Tilt
•
•
•
Tri band antenna, dual polarisation, 6 connectors
Independent tilt on each band 0-10° / 0-10° / 0-10°
UltraLine platform with multi-array capability
UltraLine
LTE Ready
• MET and RET versions, AISG1.1 or 3GPP/AISG2.0
• Single RET module to control all tilt angles, fully inserted inside the antenna (field replaceable)
The antenna has 6 colour-coded connectors located at the bottom face. See image on the following page.
R1 Ultra Low Band 698-960 MHz Ports (2x) 7/16-DIN Female Long Neck
Y1 Ultra Wide Band 1695-2690 MHz Ports (2x) 7/16-DIN Female Ultra Long Neck
Y2 Ultra Wide Band 1695-2690 MHz Ports (2x) 7/16-DIN Female Ultra Long Neck
Electrical Characteristics R1 Y1 Y2
Frequency Bands (MHz) 700 800 900 1800 2100 2600 1800 2100 2600
Tilt 0° 15.5 16.5 17.4 17.7 18.1 18.3 17.7 18.1 18.3
Gain (dBi) Tilt 5° 15.5 16.4 17.3 17.7 17.9 18.1 17.7 17.9 18.1
Tilt 10° 15.2 16.2 17.0 17.6 17.8 17.7 17.6 17.8 17.7
Input Impedance 50Ω 50Ω 50Ω
Horizontal Beamwidth (-3 dB) 73° 67° 67° 65° 65° 65° 65° 65° 65°
Vertical Beamwidth (-3 dB) 8.6° 7.5° 6.7° 6.1° 5.3° 4.2° 6.1° 5.3° 4.2°
Electrical downtilt for each band can be controlled separately. Tilt indicator(s) are covered by removable transparent cap(s).
Manual Electrical Tilt (MET) A coloured knob at the end of the tilt indicator allows change of the tilt without need of a tool. The knob colour
Control is identical to the corresponding connector ring colour. To access the knob, remove the cap by turning it counter-
clockwise. It is re-installed by opposite rotation. Do not remove the transparent cap(s) from the antenna.
Remote Electrical Tilt (RET) The remote control of the electrical tilt is managed by a Multi-Device Control Unit (MDCU) inserted in the bottom
Control of the antenna. A single actuator individually controls the tilt of each band (no need for daisy chain cables between
the bands). This module does not add any additional length to the antenna. For RET control, the transparent caps
must be in place and locked. The tilt angle indicators always remain visible and the antenna still has manual tilt
control (manual override).
RET Module Part Number MDCU-A0000 for AISG1.1 protocol (one unit included in 6880300A)
(one per antenna) MDCU-G0000 for 3GPP/AISG2.0 protocol (one unit included in 6880300G)
Environmental
Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational
conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.
68 | April 2015
698-960 / 1695-2690 / 1695-2690 MHz
6880300
6880300A 6880300G
Tri Band | Panel Antenna | XXX-Pol | 65° / 65° / 65° | 17.5 / 18.5 / 18.5 dBi | Variable Tilt
Wind load at 150 km/h Frontal: 1032 N Lateral: 469 N Rear: 1011 N
All mounting bracket kits are ordered separately unless otherwise indicated. Select from the options listed below.
Installation
Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational
conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.
April 2015 | 69
698-960 / 1695-2690 / 1695-2690 MHz
6880300-T
6880300A-T 6880300G-T
Tri Band | Panel Antenna | XXX-Pol | 65° / 65° / 65° | 17.5 / 18.5 / 18.5 dBi | Variable Tilt | with Top Connectors
•
•
•
Tri band antenna, dual polarisation, 6 connectors
Independent tilt on each band 0-10° / 0-10° / 0-10°
UltraLine platform with multi-array capability
UltraLine
LTE Ready
• MET and RET versions, AISG1.1 or 3GPP/AISG2.0
• Single RET module to control all tilt angles, fully inserted inside the antenna (field replaceable)
• TOP CONNECTORS •
Ordering Options Model Number
The antenna has 6 colour-coded connectors located at the bottom face. See image on the following page.
R1 Ultra Low Band 698-960 MHz Ports (2x) 7/16-DIN Female Long Neck
Y1 Ultra Wide Band 1695-2690 MHz Ports (2x) 7/16-DIN Female Ultra Long Neck
Y2 Ultra Wide Band 1695-2690 MHz Ports (2x) 7/16-DIN Female Ultra Long Neck
Electrical Characteristics R1 Y1 Y2
Frequency Bands (MHz) 700 800 900 1800 2100 2600 1800 2100 2600
Tilt 0° 15.5 16.5 17.4 17.7 18.1 18.3 17.7 18.1 18.3
Gain (dBi) Tilt 5° 15.5 16.4 17.3 17.7 17.9 18.1 17.7 17.9 18.1
Tilt 10° 15.2 16.2 17.0 17.7 17.8 17.7 17.6 17.8 17.7
Input Impedance 50Ω 50Ω 50Ω
Horizontal Beamwidth (-3 dB) 73° 67° 67° 65° 65° 65° 65° 65° 65°
Vertical Beamwidth (-3 dB) 8.6° 7.5° 6.7° 6.1° 5.3° 4.2° 6.1° 5.3° 4.2°
Electrical downtilt for each band can be controlled separately. Tilt indicator(s) are covered by removable transparent cap(s).
Manual Electrical Tilt (MET) A coloured knob at the end of the tilt indicator allows change of the tilt without need of a tool. The knob colour
Control is identical to the corresponding connector ring colour. To access the knob, remove the cap by turning it counter-
clockwise. It is re-installed by opposite rotation. Do not remove the transparent cap(s) from the antenna.
Remote Electrical Tilt (RET) The remote control of the electrical tilt is managed by a Multi-Device Control Unit (MDCU) inserted in the bottom
Control of the antenna. A single actuator individually controls the tilt of each band (no need for daisy chain cables between
the bands). This module does not add any additional length to the antenna. For RET control, the transparent caps
must be in place and locked. The tilt angle indicators always remain visible and the antenna still has manual tilt
control (manual override).
RET Module Part Number MDCU-A0000 for AISG1.1 protocol (one unit included in 6880300A-T)
(one per antenna) MDCU-G0000 for 3GPP/AISG2.0 protocol (one unit included in 6880300G-T)
Environmental
Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational
conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.
70 | April 2015
698-960 / 1695-2690 / 1695-2690 MHz
6880300-T
6880300A-T 6880300G-T
Tri Band | Panel Antenna | XXX-Pol | 65° / 65° / 65° | 17.5 / 18.5 / 18.5 dBi | Variable Tilt | with Top Connectors
Wind load at 150 km/h Frontal: 1032 N Lateral: 469 N Rear: 1011 N
All mounting bracket kits are ordered separately unless otherwise indicated. Select from the options listed below.
Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational
conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.
April 2015 | 71
790-960 / 1710-2170 / 1710-2690 MHz
6880200
6880200A 6880200G
Tri Band | Panel Antenna | XXXXPol | 65° / 65° / 65° | 17.5 / 18.6 / 18.6 dBi | Variable Tilt
•
•
•
Tri band antenna, dual polarisation, 6 connectors
Independent tilt on each band 0-10° / 0-10° / 0-10°
UltraLine platform with multi-array capability
UltraLine
• MET and RET versions, AISG1.1 or 3GPP/AISG2.0
• Single RET module to control all tilt angles, fully inserted inside the antenna (field replaceable)
RED Rings Extended Low Band 790-960 MHz Ports (2x) 7/16-DIN Female Long Neck
BLUE Rings Wide Band 1710-2170 MHz Ports (2x) 7/16-DIN Female Long Neck
YELLOW Rings Ultra Wide Band 1710-2690 MHz Ports (2x) 7/16-DIN Female Ultra Long Neck
Electrical Characteristics Low Band (RED) High Band (WHITE) High Band (YELLOW)
Frequency Bands (MHz) 790...880...960 1710...1880 1900...2170 1710...1880 1900...2170 2500...2690
Tilt 0° 16.5...17.0...17.5 17.8...18.2 18.2...18.6 17.6...17.9 17.9...18.4 18.3...18.6
Gain (dBi) Tilt 5° 16.5...17.0...17.5 17.7...18.0 18.0...18.5 17.5...17.7 17.7...18.2 18.0...18.2
Tilt 10° 16.4...16.9...17.4 17.6...17.8 17.8...18.3 17.5...17.6 17.6...18.0 17.7...17.8
Input Impedance 50Ω 50Ω 50Ω
Horizontal Beamwidth (-3 dB) 66° (±6°) 67° (±3°) 64° (±4°) 67° (±3°) 64° (±4°) 60° (±3°)
Vertical Beamwidth (-3 dB) 7.3° 5.5° 5.0° 5.5° 5.0° 4.0°
Manual Electrical Tilt (MET) A coloured knob at the end of the tilt indicator allows change of the tilt without need of a tool. The knob colour
Control is identical to the corresponding connector ring colour. To access the knob, remove the cap by turning it counter-
clockwise. It is re-installed by opposite rotation. Do not remove the transparent cap(s) from the antenna.
Remote Electrical Tilt (RET) The remote control of the electrical tilt is managed by a Multi-Device Control Unit (MDCU) inserted in the bottom
Control of the antenna. A single actuator individually controls the tilt of each band (no need for daisy chain cables between
the bands). This module does not add any additional length to the antenna. For RET control, the transparent caps
must be in place and locked. The tilt angle indicators always remain visible and the antenna still has manual tilt
control (manual override).
RET Module Part Number MDCU-A0000 for AISG1.1 protocol (one unit included in 6880200A)
(one per antenna) MDCU-G0000 for 3GPP/AISG2.0 protocol (one unit included in 6880200G)
Environmental
Operating Temperature Range -40° C to +60° C
Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational
conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.
72 | April 2015
790-960 / 1710-2170 / 1710-2690 MHz
6880200
6880200A 6880200G
Tri Band | Panel Antenna | XXXXPol | 65° / 65° / 65° | 17.5 / 18.6 / 18.6 dBi | Variable Tilt
Wind load at 160 km/h Frontal: 850 N Lateral: 500 N Rear: 990 N
All mounting bracket kits are ordered separately unless otherwise indicated. Select from the options listed below.
Installation
Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational
conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.
April 2015 | 73
790-960 / 1710-2690 MHz
6860100
6860100A 6860100G
Dual Band | Panel Antenna | XX-Pol | 65° / 65° | 17.5 / 18.6 dBi | Variable Tilt
•
•
•
Dual band antenna, dual polarisation, 4 connectors
Independent tilt on each band 0-10° / 0-10°
UltraLine platform with multi-array capability
UltraLine
• MET and RET versions, AISG1.1 or 3GPP/AISG2.0
• Single RET module to control all tilt angles, fully inserted inside the antenna (field replaceable)
The antenna has 4 colour-coded connectors located at the bottom face. See image on the following page.
RED Rings Extended Low Band 790-960 MHz Ports (2x) 7/16-DIN Female Long Neck
YELLOW Rings Ultra Wide Band 1710-2690 MHz Ports (2x) 7/16-DIN Female Long Neck
Electrical Characteristics Extended Low Band (RED) Ultra Wide Band (YELLOW)
Horizontal Beamwidth (-3 dB) 66° (±6°) 67° (±3°) 64° (±4°) 60° (±3°)
Electrical downtilt for each band can be controlled separately. Tilt indicator(s) are covered by removable transparent cap(s).
Manual Electrical Tilt (MET) A coloured knob at the end of the tilt indicator allows change of the tilt without need of a tool. The knob colour
Control is identical to the corresponding connector ring colour. To access the knob, remove the cap by turning it counter-
clockwise. It is re-installed by opposite rotation. Do not remove the transparent cap(s) from the antenna.
Remote Electrical Tilt (RET) The remote control of the electrical tilt is managed by a Multi-Device Control Unit (MDCU) inserted in the bottom
Control of the antenna. A single actuator individually controls the tilt of each band (no need for daisy chain cables between
the bands). This module does not add any additional length to the antenna. For RET control, the transparent caps
must be in place and locked. The tilt angle indicators always remain visible and the antenna still has manual tilt
control (manual override).
RET Module Part Number MDCU-A0000 for AISG1.1 protocol (one unit included in 6860100A)
(one per antenna) MDCU-G0000 for 3GPP/AISG2.0 protocol (one unit included in 6860100G)
Environmental
Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational
conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.
74 | April 2015
790-960 / 1710-2690 MHz
6860100
6860100A 6860100G
Dual Band | Panel Antenna | XX-Pol | 65° / 65° | 17.5 / 18.6 dBi | Variable Tilt
Wind load at 160 km/h Frontal: 850 N Lateral: 500 N Rear: 990 N
All mounting bracket kits are ordered separately unless otherwise indicated. Select from the options listed below.
305
Installation
Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational
conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.
April 2015 | 75
698-960 / 1695-2690 / 1695-2180 / 2490-2690 MHz
6888300
6888300A 6888300G
Quad Band | Panel Antenna | XXXX-Pol | 65° / 65° / 65° / 65° | 16.5 / 18.5 / 17.5 / 18.0 dBi | Variable Tilt
•
•
•
Quad band antenna, dual polarisation, 8 connectors
Independent tilt on each band 0-10° / 0-10° / 0-10° / 0-10°
UltraLine platform with multi-array capability
UltraLine
LTE Ready
• MET and RET versions, AISG1.1 or 3GPP/AISG2.0
• Single RET module to control all tilt angles, fully inserted inside the antenna (field replaceable)
R1 Ultra Low Band 698-960 MHz Ports (2x) 7/16-DIN Female Long Neck
Y1 Ultra Wide Band 1695-2690 MHz Ports (2x) 7/16-DIN Female Ultra Long Neck
B1 Wide Band 1695-2180 MHz Ports (2x) 7/16-DIN Female Ultra Long Neck
Electrical Characteristics R1 Y1 B1 Y2
Frequency Bands (MHz) 700 800 900 1800 2100 2600 1800 2100 2600
Tilt 0° 14.5 15.5 16.4 17.7 18.1 18.5 17.4 17.7 18.0
Gain (dBi) Tilt 5° 14.5 15.4 16.3 17.7 18.1 18.5 17.4 7.7 18.0
Tilt 10° 14.2 15.1 16.0 17.7 18.0 18.2 17.4 17.6 17.7
Input Impedance 50Ω 50Ω 50Ω 50Ω
VSWR < 1.5 < 1.5 < 1.5 < 1.5
Polarisation ±45° ±45° ±45° ±45°
Horizontal Beamwidth (-3 dB) 73° 65° 65° 65° 63° 61° 65° 63° 61°
Vertical Beamwidth (-3 dB) 12° 10° 9.4° 6.1° 5.3° 4.2° 6.1° 5.3° 4.2°
Electrical Downtilt Range 0-10° 0-10° 0-10° 0-10°
> 30 dB,
> 30 dB,
> 30 dB, > 30 dB, > 28 dB
Inter/Intra Band Isolation > 28 dB from
> 28 dB from 0° to 2° tilt > 28 dB from 0° to 2° tilt from 0°
0° to 2° tilt
to 2° tilt
Upper Sidelobe Rejection 18 dB
18 dB Typical 18 dB Typical 18 dB Typical
(20° sector above main beam) Typical
Front-to-Back @ 180° > 30 dB > 30 dB > 30 dB > 30 dB
Ratio @ 180° ±30° > 25 dB > 25 dB > 25 dB > 25 dB
Maximum Power (Per Port) 250 W 200 W 200 W 200 W
Intermodulation < -110
< -110 dBm < -110 dBm < -110 dBm
3rd Order for 2x20W Carriers dBm
Electrical Downtilt Control
Electrical downtilt for each band can be controlled separately. Tilt indicator(s) are covered by removable transparent cap(s).
Manual Electrical Tilt (MET) A coloured knob at the end of the tilt indicator allows change of the tilt without need of a tool. The knob colour
Control is identical to the corresponding connector ring colour. To access the knob, remove the cap by turning it counter-
clockwise. It is re-installed by opposite rotation. Do not remove the transparent cap(s) from the antenna.
Remote Electrical Tilt (RET) The remote control of the electrical tilt is managed by a Multi-Device Control Unit (MDCU) inserted in the bottom
Control of the antenna. A single actuator individually controls the tilt of each band (no need for daisy chain cables between
the bands). This module does not add any additional length to the antenna. For RET control, the transparent caps
must be in place and locked. The tilt angle indicators always remain visible and the antenna still has manual tilt
control (manual override).
RET Module Part Number MDCU-A0000 for AISG1.1 protocol (one unit included in 6888300A)
(one per antenna) MDCU-G0000 for 3GPP/AISG2.0 protocol (one unit included in 6888300G)
Environmental
Operating Temperature Range -40° C to +60° C
Environmental ETS 300 019
RoHS Compliant Yes
Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational
conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.
76 | April 2015
698-960 / 1695-2690 / 1695-2180 / 2490-2690 MHz
6888300
6888300A 6888300G
Quad Band | Panel Antenna | XXXX-Pol | 65° / 65° / 65° / 65° | 16.5 / 18.5 / 17.5 / 18.0 dBi | Variable Tilt
Wind load at 150 km/h Frontal: 764 N Lateral: 348 N Rear: 749 N
All mounting bracket kits are ordered separately unless otherwise indicated. Select from the options listed below.
Installation
Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational
conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.
April 2015 | 77
698-960 / 1695-2690 / 1695-2690 MHz
6878300
6878300A 6878300G
Tri Band | Panel Antenna | XXX-Pol | 65° / 65° / 65° | 16.5 / 18.0 / 18.5 dBi | Variable Tilt
•
•
•
Tri band antenna, dual polarisation, 6 connectors
Independent tilt on each band 0-10° / 0-10° / 0-10°
UltraLine platform with multi-array capability
UltraLine
LTE Ready
• MET and RET versions, AISG1.1 or 3GPP/AISG2.0
• Single RET module to control all tilt angles, fully inserted inside the antenna (field replaceable)
The antenna has 6 colour-coded connectors located at the bottom face. See image on the following page.
R1 Ultra Low Band 698-960 MHz Ports (2x) 7/16-DIN Female Long Neck
Y1 Ultra Wide Band 1695-2690 MHz Ports (2x) 7/16-DIN Female Ultra Long Neck
Y2 Ultra Wide Band 1695-2690 MHz Ports (2x) 7/16-DIN Female Ultra Long Neck
Electrical Characteristics R1 Y1 Y2
Frequency Bands (MHz) 700 800 900 1800 2100 2600 1800 2100 2600
Tilt 0° 14.5 15.5 16.4 17.7 17.7 17.7 17.7 18.1 18.3
Gain (dBi) Tilt 5° 14.5 15.4 16.3 17.7 17.7 17.7 17.7 17.9 18.1
Tilt 10° 14.2 15.1 16.0 17.7 17.5 17.4 17.6 17.8 17.7
Input Impedance 50Ω 50Ω 50Ω
Horizontal Beamwidth (-3 dB) 73° 67° 67° 68° 70° 74° 65° 65° 65°
Vertical Beamwidth (-3 dB) 12° 10° 9.4° 6.1° 5.3° 4.2° 6.1° 5.3° 4.2°
Electrical downtilt for each band can be controlled separately. Tilt indicator(s) are covered by removable transparent cap(s).
Manual Electrical Tilt (MET) A coloured knob at the end of the tilt indicator allows change of the tilt without need of a tool. The knob colour
Control is identical to the corresponding connector ring colour. To access the knob, remove the cap by turning it counter-
clockwise. It is re-installed by opposite rotation. Do not remove the transparent cap(s) from the antenna.
Remote Electrical Tilt (RET) The remote control of the electrical tilt is managed by a Multi-Device Control Unit (MDCU) inserted in the bottom
Control of the antenna. A single actuator individually controls the tilt of each band (no need for daisy chain cables between
the bands). This module does not add any additional length to the antenna. For RET control, the transparent caps
must be in place and locked. The tilt angle indicators always remain visible and the antenna still has manual tilt
control (manual override).
RET Module Part Number MDCU-A0000 for AISG1.1 protocol (one unit included in 6876300A)
(one per antenna) MDCU-G0000 for 3GPP/AISG2.0 protocol (one unit included in 6876300G)
Environmental
Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational
conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.
78 | April 2015
698-960 / 1695-2690 / 1695-2690 MHz
6878300
6878300A 6878300G
Tri Band | Panel Antenna | XXX-Pol | 65° / 65° / 65° | 16.5 / 18.0 / 18.5 dBi | Variable Tilt
Wind load at 150 km/h Frontal: 764 N Lateral: 348 N Rear: 749 N
All mounting bracket kits are ordered separately unless otherwise indicated. Select from the options listed below.
Installation
Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational
conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.
April 2015 | 79
698-960 / 1695-2690 / 1695-2690 MHz
6878300-T
6878300A-T 6878300G-T
Tri Band | Panel Antenna | XXX-Pol | 65° / 65° / 65° | 16.5 / 18.5 / 18.5 dBi | Variable Tilt | with Top Connectors
•
•
•
Tri band antenna, dual polarisation, 6 connectors
Independent tilt on each band 0-10° / 0-10° / 0-10°
UltraLine platform with multi-array capability
UltraLine
LTE Ready
• MET and RET versions, AISG1.1 or 3GPP/AISG2.0
• Single RET module to control all tilt angles, fully inserted inside the antenna (field replaceable)
• TOP CONNECTORS •
Ordering Options Model Number
The antenna has 6 colour-coded connectors located at the bottom face. See image on the following page.
R1 Ultra Low Band 698-960 MHz Ports (2x) 7/16-DIN Female Long Neck
Y1 Ultra Wide Band 1695-2690 MHz Ports (2x) 7/16-DIN Female Ultra Long Neck
Y2 Ultra Wide Band 1695-2690 MHz Ports (2x) 7/16-DIN Female Ultra Long Neck
Electrical Characteristics R1 Y1 Y2
Frequency Bands (MHz) 700 800 900 1800 2100 2600 1800 2100 2600
Tilt 0° 14.5 15.5 16.4 17.7 18.1 18.3 17.7 18.1 18.3
Gain (dBi) Tilt 5° 14.5 15.4 16.3 17.7 17.9 18.1 17.7 17.9 18.1
Tilt 10° 14.2 15.1 16.0 17.7 17.8 17.8 17.6 17.8 17.7
Input Impedance 50Ω 50Ω 50Ω
Horizontal Beamwidth (-3 dB) 73° 67° 67° 65° 65° 65° 65° 65° 65°
Vertical Beamwidth (-3 dB) 12° 10° 9.4° 6.1° 5.3° 4.2° 6.1° 5.3° 4.2°
Electrical downtilt for each band can be controlled separately. Tilt indicator(s) are covered by removable transparent cap(s).
Manual Electrical Tilt (MET) A coloured knob at the end of the tilt indicator allows change of the tilt without need of a tool. The knob colour
Control is identical to the corresponding connector ring colour. To access the knob, remove the cap by turning it counter-
clockwise. It is re-installed by opposite rotation. Do not remove the transparent cap(s) from the antenna.
Remote Electrical Tilt (RET) The remote control of the electrical tilt is managed by a Multi-Device Control Unit (MDCU) inserted in the bottom
Control of the antenna. A single actuator individually controls the tilt of each band (no need for daisy chain cables between
the bands). This module does not add any additional length to the antenna. For RET control, the transparent caps
must be in place and locked. The tilt angle indicators always remain visible and the antenna still has manual tilt
control (manual override).
RET Module Part Number MDCU-A0000 for AISG1.1 protocol (one unit included in 6878300A-T)
(one per antenna) MDCU-G0000 for 3GPP/AISG2.0 protocol (one unit included in 6878300G-T)
Environmental
Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational
conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.
80 | April 2015
698-960 / 1695-2690 / 1695-2690 MHz
6878300-T
6878300A-T 6878300G-T
Tri Band | Panel Antenna | XXX-Pol | 65° / 65° / 65° | 16.5 / 18.5 / 18.5 dBi | Variable Tilt | with Top Connectors
Wind load at 150 km/h Frontal: 764 N Lateral: 348 N Rear: 749 N
All mounting bracket kits are ordered separately unless otherwise indicated. Select from the options listed below.
Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational
conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.
April 2015 | 81
790-960 / 1710-2170 / 1710-2690 MHz
6878200
6878200A 6878200G
Tri Band | Panel Antenna | XXX-Pol | 65° / 65° / 65° | 16.5 / 18.6 / 18.6 dBi | Variable Tilt
•
•
•
Tri band antenna, dual polarisation, 6 connectors
Independent tilt on each band 0-10° / 0-10° / 0-10°
UltraLine platform with multi-array capability
UltraLine
• MET and RET versions, AISG1.1 or 3GPP/AISG2.0
• Single RET module to control all tilt angles, fully inserted inside the antenna (field replaceable)
RED Rings Extended Low Band 790-960 MHz Ports (2x) 7/16-DIN Female Long Neck
BLUE Rings Wide Band 1710-2170 MHz Ports (2x) 7/16-DIN Female Ultra Long Neck
YELLOW Rings Ultra Wide Band 1710-2690 MHz Ports (2x) 7/16-DIN Female Ultra Long Neck
Electrical Characteristics Low Band (RED) Wide Band (BLUE) Ultra Wide Band (YELLOW)
Frequency Bands (MHz) 790...880...960 1710...1880 1900...2170 1710...1880 1900...2170 2500...2690
Horizontal Beamwidth (-3 dB) 66° (±6°) 67° (±3°) 64° (±4°) 67° (±3°) 64° (±4°) 60° (±3°)
Vertical Beamwidth (-3 dB) 9.0° 5.7° 4.9° 5.5° 5.0° 4.0°
Manual Electrical Tilt (MET) A coloured knob at the end of the tilt indicator allows change of the tilt without need of a tool. The knob colour
Control is identical to the corresponding connector ring colour. To access the knob, remove the cap by turning it counter-
clockwise. It is re-installed by opposite rotation. Do not remove the transparent cap(s) from the antenna.
Remote Electrical Tilt (RET) The remote control of the electrical tilt is managed by a Multi-Device Control Unit (MDCU) inserted in the bottom
Control of the antenna. A single actuator individually controls the tilt of each band (no need for daisy chain cables between
the bands). This module does not add any additional length to the antenna. For RET control, the transparent caps
must be in place and locked. The tilt angle indicators always remain visible and the antenna still has manual tilt
control (manual override).
RET Module Part Number MDCU-A0000 for AISG1.1 protocol (one unit included in 6878200A)
(one per antenna) MDCU-G0000 for 3GPP/AISG2.0 protocol (one unit included in 6878200G)
Environmental
Operating Temperature Range -40° C to +60° C
Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational
conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.
82 | April 2015
790-960 / 1710-2170 / 1710-2690 MHz
6878200
6878200A 6878200G
Tri Band | Panel Antenna | XXX-Pol | 65° / 65° / 65° | 16.5 / 18.6 / 18.6 dBi | Variable Tilt
Wind load at 160 km/h Frontal: 870 N Lateral: 396 N Rear: 852 N
All mounting bracket kits are ordered separately unless otherwise indicated. Select from the options listed below.
Installation
Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational
conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.
April 2015 | 83
790-960 / 1710-2690 MHz
6863100
6863100A 6863100G
Dual Band | Panel Antenna | XX-Pol | 65° / 65° | 16.5 / 18.6 dBi | Variable Tilt
•
•
•
Dual band antenna, dual polarisation, 4 connectors
Independent tilt on each band 0-10° / 0-10°
UltraLine platform with multi-array capability
UltraLine
• MET and RET versions, AISG1.1 or 3GPP/AISG2.0
• Fully internal RET control based on our patented technologies
The antenna has 4 colour-coded connectors located at the bottom face. See image on the following page.
RED Rings Extended Low Band 790-960 MHz Ports (2x) 7/16-DIN Female Long Neck
YELLOW Rings Ultra Wide Band 1695-2690 MHz Ports (2x) 7/16-DIN Female Long Neck
Electrical Characteristics Extended Low Band (RED) Ultra Wide Band (YELLOW)
Horizontal Beamwidth (-3 dB) 66° (±6°) 67° (±3°) 64° (±4°) 60° (±3°)
Electrical downtilt for each band can be controlled separately. Tilt indicator(s) are covered by removable transparent cap(s).
Manual Electrical Tilt (MET) A coloured knob at the end of the tilt indicator allows change of the tilt without need of a tool. The knob colour
Control is identical to the corresponding connector ring colour. To access the knob, remove the cap by turning it counter-
clockwise. It is re-installed by opposite rotation. Do not remove the transparent cap(s) from the antenna.
Remote Electrical Tilt (RET) The remote control of the electrical tilt is managed by a Multi-Device Control Unit (MDCU) inserted in the bottom
Control of the antenna. A single actuator individually controls the tilt of each band (no need for daisy chain cables between
the bands). This module does not add any additional length to the antenna. For RET control, the transparent caps
must be in place and locked. The tilt angle indicators always remain visible and the antenna still has manual tilt
control (manual override).
RET Module Part Number MDCU-A0000 for AISG1.1 protocol (one unit included in 6863100A)
(one per antenna) MDCU-G0000 for 3GPP/AISG2.0 protocol (one unit included in 6863100G)
Environmental
Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational
conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.
84 | April 2015
790-960 / 1710-2690 MHz
6863100
6863100A 6863100G
Dual Band | Panel Antenna | XX-Pol | 65° / 65° | 16.5 / 18.6 dBi | Variable Tilt
Wind Load at 150 km/h Frontal: 764 N Lateral: 348 N Rear: 749 N
(EN1991-4-1) at 160 km/h Frontal: 870 N Lateral: 396 N Rear: 852 N
All mounting bracket kits are ordered separately unless otherwise indicated. Select from the options listed below.
305
1515
Installation
Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational
conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.
April 2015 | 85
698-960 / 1710-2690 / 1710-2690 MHz
6876300
6876300A 6876300G
Tri Band | Panel Antenna | XXX-Pol | 65° / 65° / 65° | 14.5 / 17.5 / 17.5 dBi | Variable Tilt
The antenna has 6 colour-coded connectors located at the bottom face. See image on the following page.
RED Rings Extended Low Band 698-960 MHz Ports (2x) 7/16-DIN Female Long Neck
YELLOW Rings Ultra Wide Band 1710-2690 MHz Ports (4x) 7/16-DIN Female Long Neck
Electrical Characteristics Extended Low Band (RED) High Ultra Wide Band (YELLOW)
Horizontal Beamwidth (-3 dB) 75°...73°...69°...62° 67° (±3°) 64° (±4°) 60° (±3°)
Electrical downtilt for each band can be controlled separately. Tilt indicator(s) are covered by removable transparent cap(s).
Manual Electrical Tilt (MET) A coloured knob at the end of the tilt indicator allows change of the tilt without need of a tool. The knob colour
Control is identical to the corresponding connector ring colour. To access the knob, remove the cap by turning it counter-
clockwise. It is re-installed by opposite rotation. Do not remove the transparent cap(s) from the antenna.
Remote Electrical Tilt (RET) The remote control of the electrical tilt is managed by a Multi-Device Control Unit (MDCU) inserted in the bottom
Control of the antenna. A single actuator individually controls the tilt of each band (no need for daisy chain cables between
the bands). This module does not add any additional length to the antenna. For RET control, the transparent caps
must be in place and locked. The tilt angle indicators always remain visible and the antenna still has manual tilt
control (manual override).
RET Module Part Number MDCU-A0000 for AISG1.1 protocol (one unit included in 6876300A)
(one per antenna) MDCU-G0000 for 3GPP/AISG2.0 protocol (one unit included in 6876300G)
Environmental
Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational
conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.
86 | April 2015
698-960 / 1710-2690 / 1710-2690 MHz
6876300
6876300A 6876300G
Tri Band | Panel Antenna | XXX-Pol | 65° / 65° / 65° | 14.5 / 17.5 / 17.5 dBi | Variable Tilt
Wind load at 150 km/h Frontal: 531 N Lateral: 521 N Rear: 242 N
All mounting bracket kits are ordered separately unless otherwise indicated. Select from the options listed below.
Installation
Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational
conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.
April 2015 | 87