Professional Documents
Culture Documents
VALVES AND
CONNECTIONS
FOR SF6 GAS
www.dilo.com
2 2 2
TABLE OF CONTENTS
General........................................................................................................................................................................................... 5 - 10
Couplings DN6..................................................................................................................................................................... 17 - 25
Couplings DN7..................................................................................................................................................................... 27 - 32
Couplings DN8..................................................................................................................................................................... 33 - 42
Couplings DN12................................................................................................................................................................... 43 - 56
Couplings DN20................................................................................................................................................................... 57 - 70
Couplings DN40................................................................................................................................................................... 71 - 76
DILO hoses...................................................................................................................................................................................... 91 - 99
C 3099-07 3 3 3
4 4 4
GENERAL
DILO offers the widest valves and couplings product range in the GENERAL
world. Whether for medium voltage switchgear, high voltage
The DILO seal principle......................................................... 06
switchgear or gas-insulated lines (GIL) our products always meet
your requirements. Explanation of DILO-pressure stages................................... 07
Surface treatment and cleaning........................................... 08
The DILO sealing principle prevents the loss of SF6 gas and mo-
isture from penetrating the SF6 gas system. DILO couplings will Quality assurance................................................................ 09
eliminate the loss of SF6 gas by incorrect gas handling. Thanks Symbols for valves and fittings............................................ 10
to their reliability, quality and durability DILO couplings are the Mounting instructions........................................................... 11-14
world‘s most widely used connecting system for SF6 switchgear.
Torque table.......................................................................... 15
C 3099-07 5 5
GENERAL
DILO is a seal principle without intermediate seal in the form of Thus, two ring-shaped sealing areas are produced which create
groove and tongue with little depth of immersion. This principle high stability.
guarantees permanent tightness at high static and dynamic The additional braking surface prevents plastic deformations at
alternating stresses which might result from vacuum and the ring-shaped sealing areas.
pressure in connection with high temperatures and vibrations
DILO fittings are easy to assemble and require no maintenance.
inside the tubing systems.
They can loosened and re-connected as often as desired. Thus,
Sealing in accordance with the DILO principle is effected by direct the re-use of the DILO seal is guaranteed. Due to the little depth
contact of the sealing profiles of the groove and tongue parts. The of immersion of DILO groove and tongue the tubes can be imme-
different radii of curvature of groove and tongue are in a certain diately pulled out laterally after loosing the clamping nut.
relation to each other.
Advantages of application
▪ Self-closing coupling system ▪ Suitable for temperatures from -60 °C to +80 °C
▪ Pressure and vacuum-tight even when ▪ Direct connection to DILO service carts without adapter
coupling and uncoupling
▪ Resistant to vibrations without any additional protection
▪ Leak rate ≤ 1 x 10-8 mbar l/s (DN6 - DN20)* ▪ Available in different materials even for outdoor switchgear
▪ Permanent tightness even when frequently
connected and disconnected
▪ Applicable up to PN 64 bar
*DN40 on request
6 6 6 C 3099-07
GENERAL
DILO-Type explanation
Explanation of abbreviations used in our catalogue
A Soldering union
Material standards
1.4571 X6CrNiMoTi17-12-2 C
CW614N CuZn39Pb3 P
EN AW-6082 EN AW-ALSi1MgMn T
1.4305 X10CrNiS189 E
CW713R CuZn37Mn3Al2PbSi H
C 3099-07 7 7 7
GENERAL
Before dispatch or storage, the finished valves and fittings must be treated as follows:
Version
Version of the screw-in stub with O-ring sealing (can also be supplied in special design with edge acc. to DIN 3852-1 form B and DIN
EN ISO 1179-4 form B).
Design of the screw-in holes for the isometric thread as well as for Whitworth-pipe threads according to DIN 3852-1 form X and DIN
EN ISO 1179-1.
Soldering process
DILO-soldering unions can be soldered by the well-known „autogenous“ soldering techniques.
Packing
Parts are all hermetically sealed in PVC to ensure they are kept free of dust and dirt. The unions are protected against damage by
plastic caps.
8 8 8 C 3099-07
GENERAL
QUALITY ASSURANCE
Quality assurance takes the first place within the DILO-organization. Our approved and authorized experts permanently check the mate-
rial carefully. The entire raw material is ordered according to DILO approval-/ order regulations. Thus it is guaranteed that all necessary
tests have been carried out which is confirmed in test certificates according to EN 10204 (3.1).
By marking of the raw materials and finished products, the identity of materials is guaranteed. Our fittings are TÜV-approved. Further-
more a certificate according to ISO 9001:2015 is available.
CERTIFICATE
CERTIFICATE TÜV SÜD-DG-0972.2018.002
The company
DILO Armaturen und Anlagen GmbH - has facilities permitting manufacturing and inspection in compliance
Frundsbergstr. 36 with the current technical standards,
87727 Babenhausen - operates a quality system which guarantees that manufacturing and
Germany inspection of the products stated in our report are in conformity with
the technical rules and standards,
- employs qualified supervisory and inspection personnel.
has established and applies
a Quality Management System for
The company has the welding suitability for manufacturing pressure
equipment according above mentioned standards.
Development, production and distribution of Independently of this certificate the requirements of the respectively
high pressure and vacuum fittings, selected module have to be considers within the framework of
SF6 maintenance and measuring devices. manufacturing pressure equipment according to Pressure Equipment
Directive 2014/68/EU.
An audit was performed, Report No. 70015247.
Proof has been furnished that the requirements
according to The scope of the audit is detailed in our Summary Report No.
R-000020498811-19 dated 2019-11-25.
ISO 9001:2015
Valid until: October 2022
are fulfilled.
The certificate is valid from 2018-05-25 until 2021-05-24. Munich, November 26th, 2019
Certificate Registration No.: 12 100 4355 TMS.
Certification Body
Material and Welding Technology
_______________
_____________________
Product Compliance Management Michael Schulz
Munich, 2018-05-25
EQ1810362 TÜV SÜD Industrie Service GmbH, Westendstr. 199, 80686 Munich, Germany
C 3099-07 9 9 9
GENERAL
Coupled coupling
Coupling halfs
Hose
10 10 10 C 3099-07
MOUNTING INSTRUCTIONS
General
C 3100-05 11 11 11
MOUNTING INSTRUCTIONS
MOUNTING INSTRUCTIONS
Mounting illustration:
1. Rectangularly saw off the pipes 2. Deburring of the pipe extremities inside and outside
3. Clean to a bright metallic finish 4. Apply the soldering flux on the pipe
5. Apply the soldering flux at the part to be soldered 6. Use of auxiliary materials
12 12 12 C 3100-05
MOUNTING INSTRUCTIONS
7. Observe the instructions of thesoldering materials 8. Before assembling clean the DILO tongue and
supplier groove part
9. Lubricate with appropriate lubricants 10. Lubricating points at a DILO tube union
11. Tighten fast and strongly the clamping nut by 12. A screw in plug is sealed into a housing or block
counteracting force according to torque table with an O ring or copper seal ring.
C 3100-05 13 13 13
MOUNTING INSTRUCTIONS
MOUNTING EXAMPLE
DN d4 d7 d8 a1 b1 W
M16 x 1,5
8 26 27 1,5 14 0,1
G 3/8 A
12 G 1/2 A 36 37 2,5 16 0,1
M33 x 2
20 49 50 2,5 20 0,2
G1A
40 G 1 1/2 A 65 66 2,5 24 0,2
Milling cutter
(on request)
Order No.: 3-216-...
14 14 14 C 3100-05
TORQUE TABLE
Screw-in thread
Screw-in thread Material Torque Nm
G1/8 Brass 15
G1/4 AL / Brass 15
AL 40
G3/8
Stainless steel / Brass 40
G3/8 safety valve Brass 25
AL 60
G1/2
Stainless steel / Brass 70
DN8 AL 60
DN12 3-888-R… AL 15
Subject to change without notice. © Copyright DILO
DN20 AL 110
Covering caps
Nominal diameters Wrench size Material Torque Nm
DN8 24 AL 20
DN20 30 AL 40
DN40 50 AL 40
C 3100-05 15 15 15
16 16 16
DILO couplings DN6
Transition piece to
▪ 3-419-R004
DN8 connections............................................... 24
C 3101-07 17 17
DILO COUPLINGS DN6
PN10 DN6
COUPLING GROOVE PART
3-408-R101
3-408-R007
Spare O-ring:
Order No. 05-1917-R003
3-408-R020
3-408-R021/22
18 18 18 C 3101-07
PN10 DN6
FLANGE COUPLING
3-408-R101
3-408-R007
Spare O-ring
Order No. 05-0057-R084
3-408-R020
3-408-R021/22
C 3101-07 19 19 19
DILO COUPLINGS DN6
PN10 DN6
GAUGE CONNECTING PIECE
Spare O-ring
Order No. 05-0057-R086
PN10 DN6
COVERING CAP
Spare O-ring
Order No. 05-0057-R084
20 20 20 C 3101-07
PN10 DN6
COUPLING TONGUE PART
3-408-R105 3-408-R023
3-408-R006 3-408-R021/22
Spare O-ring
Order No. 05-0057-R084
3-408-R020
3-419-R004
C 3101-07 21 21 21
DILO COUPLINGS DN6
PN10 DN6
COUPLING TONGUE PART
with connecting coupling for measuring device
hose for
measuring device 3-408-R105
3-408-R006
22 22 22 C 3101-07
PN10 DN6
SOLDERING STUB CONNECTION
Spare O-ring
Order No. 05-0057-R084
PN10 DN6
GAUGE CONNECTING COUPLING
Spare O-ring
Order No. 05-0057-R084
C 3101-07 23 23 23
DILO COUPLINGS DN6
PN10 DN6
TRANSITION PIECE TO DN8 CONNECTIONS
Spare O-ring
Order No. 05-0057-R084
24 24 24 C 3101-07
PN10 DN6
ADAPTER PIECE
C 3101-07 25 25 25
26 26 26
DILO COUPLINGS DN7
C 3102-04 27 27
DILO COUPLINGS DN7
PN30 DN7
PLUG CONNECTION GROOVE PART
3-308-R002
3-308-R016
Spare O-ring
Order No. 05-0057-R016
28 28 28 C 3102-04
PN30 DN7
COVERING CAP FOR PLUG CONNECTION
GROOVE PART
3-308-R003
C 3102-04 29 29 29
DILO COUPLINGS DN7
PN30 DN7
PLUG CONNECTION TONGUE PART
SM... 3-308-R003
GS... 05-0493-R001
ML1-AD10-1
ML1-AD10-2
3-251-R001
30 30 30 C 3102-04
PN30 DN7
PLUG CONNECTION TONGUE PART
with connecting coupling for measuring device
05-0493-R001
C 3102-04 31 31 31
DILO COUPLINGS DN7
PN30 DN7
COVERING CAP FOR PLUG CONNECTION
TONGUE PART
3-308-R002
32 32 32 C 3102-04
DILO COUPLINGS DN8
All couplings are temperature-resistant from -40 °C Flange coupling PN64 DN8
▪ 3-778-R001
with 2-hole flange..............................................38
to +80 °C.
In special version these couplings are also availa- Covering cap für coupling groove part
ble for a temperature range of -60 °C to +80 °C. ▪ VK/KN-04/8
PN64 DN8...........................................................39
The suitable connecting parts for DILO couplings ▪ 3VK/F-02/8 Coupling tongue part PN64 DN8.......................40
must be ordered separately.
Coupling tongue part PN64 DN8 with
▪ 6-1161-R011
connecting coupling for measuring device.......41
▪ SK-372-R020/ Gauge connecting coupling
R021 PN64 DN8...........................................................42
C 3103-04 33 33
DILO COUPLINGS DN8
PN64 DN8
COUPLING GROOVE PART
VK/A-02/8 P Brass
SM...
SK-372-R...
GS... VK/F-02/8
ML1-AD10-1 VK/KN-04/8
ML1-AD10-2
3-251-R001
34 34 34 C 3103-04
PN64 DN8
COUPLING GROOVE PART WITH O-RING
SK-372-R...
Spare O-ring
Bestell-Nr. 05-0057-R016 VK/F-02/8
VK/KN-04/8
In special version the screw-in thread can also be supplied with sealing edge
according to DIN 3852-1 and DIN EN ISO 1179.
C 3103-04 35 35 35
DILO COUPLINGS DN8
PN64 DN8
FLANGE COUPLING
SK-372-R...
VK/F-02/8
Spare O-ring
Order No. 05-0057-R084
VK/KN-04/8
36 36 36 C 3103-04
PN64 DN8
FLANGE COUPLING
SK-372-R...
VK/F-02/8
VK/KN-04/8
C 3103-04 37 37 37
DILO COUPLINGS DN8
PN64 DN8
FLANGE COUPLING WITH 2-HOLE FLANGE
SK-372-R...
VK/F-02/8
Spare O-ring
Order No. 05-0057-R125
VK/KN-04/8
38 38 38 C 3103-04
PN64 DN8
COVERING CAP FOR COUPLING GROOVE PART
3-778-R001
SK-272-R001 / R003
Spare O-ring
Order No. 05-0057-R132
VK/A-02/8
VK/B-03/8
VK/BG-03/8
C 3103-04 39 39 39
DILO COUPLINGS DN8
PN64 DN8
COUPLING TONGUE PART
VK/F-02/8 P Brass
SM...
3-778-R001
Spare O-ring
Order No. 05-0057-R024
ML1-AD10-1 VK/A-02/8
ML1-AD10-2
VK/B-03/8
3-251-R001 VK/BG-03/8
40 40 40 C 3103-04
PN35 DN8
COUPLING TONGUE PART
with connecting coupling for measuring device
hose for
measuring device 3-778-R001
SK-272-R001 / R003
VK/A-02/8
VK/B-03/8
VK/BG-03/8
C 3103-04 41 41 41
DILO COUPLINGS DN8
PN64 DN8
GAUGE CONNECTING COUPLING
SK-272-R001
Spare O-ring
Order No. 05-0057-R225
Spare O-ring
Order No. 05-0057-R024
.Subject to change without notice. © Copyright DILO
Description VK/A-02/8
The gauge connecting coupling serves as connecting piece to a coupling groove part DN8. When
coupling, a pin in the gauge connecting coupling opens the flow of the opposite coupling groove
part (forced opening). This allows to read the present operating pressure on the screwed-in gauge.
When disconnecting, the concial nipple of the groove part is closed by spring load (pressure and
vacuum tight). If the gauge connecting coupling is not connected the gauge shows „zero pressure“. VK/B-03/8
The connecting coupling allows to install the gauge in any required position (rotatable 360°) VK/BG-03/8
42 42 42 C 3103-04
DILO COUPLINGS DN12
C 3104-07 43 43
DILO COUPLINGS DN12
PN10 DN12
COUPLING GROOVE PART
3-888-R001
3-888-R007
Spare O-ring
Order No. 05-0057-R087
3-888-R009
44 44 44 C 3104-07
PN10 DN12
COVERING CAP
3-888-R005
Spare O-ring
Order No. 05-0057-R096
C 3104-07 45 45 45
DILO COUPLINGS DN12
PN10 DN12
COUPLING TONGUE PART
SM...
3-888-R005
GS...
Spare O-ring
Order No. 1-05-0057-R096
ML1-AD22-1
ML1-AD22-2
3-240
46 46 46 C 3104-07
PN10 DN12
COUPLING TONGUE PART
with connecting coupling for measuring device
hose for
3-888-R005
measuring device
C 3104-07 47 47 47
DILO COUPLINGS DN12
PN10 DN12
GAUGE CONNECTING COUPLING
3-888-R005
Spare O-ring
Order No. 05-0057-R096
48 48 48 C 3104-07
PN10 DN12
GAUGE CONNECTING COUPLING
3-888-R005
C 3104-07 49 49 49
50 50 50
DILO PLUG-IN COUPLINGS DN12
C 3104-07 51 51
DILO PLUG-IN COUPLINGS DN12
PN8 DN12
PLUG-IN CONNECTION GROOVE PART
3-1095-R001
3-1095-R016
Spare O-ring
Order No. 05-0057-R087
52 52 52 C 3104-07
PN8 DN12
COVERING CAP FOR PLUG-IN CONNECTION
GROOVE PART
3-1095-R005
k e r- s o ft w a
ac re
tr
.w
c.
lC
ww
mo
ci k
ot
b
yu
N
O
!W
PD
F -X C h a n ge
C 3104-07 53 53 53
DILO PLUG-IN COUPLINGS DN12
PN8 DN12
PLUG-IN CONNECTION TONGUE PART
SM...
3-1095-R005
GS...
ML1-AD22-1
ML1-AD22-2
k e r- s o ft w a
ac re
tr
.w
c.
ilC
ww
mo
kc
ot
b
yu
N
O
!W
PD
F -X C h a n ge
54 54 54 C 3104-07
PN8 DN12
PLUG-IN CONNECTION TONGUE PART
with connecting coupling for measuring device
hose for
measuring device 3-1095-R005
k e r- s o ft w a
ac re
tr
.w
c.
lC
ww
mo
i
kc
ot
b
yu
N
O
!W
PD
F -X C h a n ge
C 3104-07 55 55 55
DILO PLUG-IN COUPLINGS DN12
PN8 DN12
DENSITY GAUGE CONNECTION
k e r- s o ft w a
ac re
tr
.w
c.
lC
ww
mo
i
kc
ot
b
yu
N
O
!W
PD
F -X C h a n ge
56 56 56 C 3104-07
DILO COUPLINGS DN20
C 3105-09 57 57
DILO COUPLINGS DN20
PN64 DN20
COUPLING GROOVE PART
VK/A-02/20 P Brass
SM... SK-282-R001
GS... VK/F-02/20
ML1-AD22-1 VK/KN-04/20
ML1-AD22-2
3-240
58 58 58 C 3105-09
PN64 DN20
COUPLING GROOVE PART WITH O-RING
SK-282-R001
VK/F-02/20
Spare O-ring
Order No. 05-0057-R039
VK/KN-04/20
In special version the screw-in thread can also be supplied with sealing edge
according to DIN 3852-1 and DIN EN ISO 1179.
C 3105-09 59 59 59
DILO COUPLINGS DN20
PN64 DN20
FLANGE COUPLING
SK-282-R001
VK/F-02/20
Spare O-ring
Order No. 05-0057-R030
VK/KN-04/20
60 60 60 C 3105-09
PN64 DN20
FLANGE COUPLING WITH 2-HOLE FLANGE
SK-282-R001
VK/F-02/20
Spare O-ring
Order No. 05-0057-R098
VK/KN-04/20
C 3105-09 61 61 61
DILO COUPLINGS DN20
PN64 DN20
FLANGE COUPLING
SK-282-R001
VK/F-02/20
Spare O-ring
Order No. 05-0057-R116
VK/KN-04/20
62 62 62 C 3105-09
PN64 DN20
COVERING CAP FOR COUPLING GROOVE PART
3-777-R001
VK/FL-01/20
3-685-R001
Spare O-ring
Order No. 05-0057-R116
VK/A-02/20
VK/B-03/20
VK/BG-03/20
C 3105-09 63 63 63
DILO COUPLINGS DN20
PN64 DN20
COUPLING TONGUE PART
VK/F-02/20 P Brass
SM... 3-777-R001
VK/FL-01/20
GS...
VK/A-02/20
3-240
VK/B-03/20
VK/BG-03/20
64 64 64 C 3105-09
3-1121-R003
QUICK COUPLING DN20 / PN10
SM... 3-777-R...
closed coupling
VK/FL-01/20
GS...
3-685-R...
VK/A-02/20
open coupling
VK/B-03/20
VK/BG-03/20
Mount for safe fixation on the wall
and as dust protection
Article-No. 3-1121-R093
C 3105-09 65 65 65
DILO COUPLINGS DN20
PN35 DN20
COUPLING TONGUE PART
with connecting coupling for measuring device
VK/FL-01/20
3-685-R001
VK/A-02/20
VK/B-03/20
VK/BG-03/20
66 66 66 C 3105-09
PN64 DN20
COUPLING TONGUE PART
SK-372-R... 3-777-R001
VK/FL-01/20
VK/F-02/8
3-685-R001
VK/KN-04/8
VK/A-02/20
VK/B-03/20
VK/BG-03/20
C 3105-09 67 67 67
DILO COUPLINGS DN20
SK-282-R001
SK-372-R...
VK/F-02/8 VK/F-02/20
VK/KN-04/8 VK/KN-04/20
68 68 68 C 3105-09
PN64 DN20
COUPLING TONGUE PART WITH AIR FILTER
3-777-R001
VK/FL-01/20
Description 3-685-R001
This coupling tongue part allows gas compartments which are under vacuum to be flooded
with air after the SF6 gas recovery and it is not necessary to use any service cart.
The integrated 100-µm filter sieve prevents dirt particles from ambient air penetrating the
gas compartment during the flooding process.
VK/A-02/20
VK/B-03/20
VK/BG-03/20
C 3105-09 69 69 69
DILO COUPLINGS DN20
PN64 DN20
GAUGE CONNECTING COUPLING
SK-282-R020 P Brass
3-777-R001
Gauge with
connecting thread
G½A
VK/FL-01/20
Spare O-ring
Order No. 05-0057-R225
3-685-R001
Spare O-ring
Order No. 05-0057-R010
Subject to change without notice. . © Copyright DILO
VK/A-02/20
Description:
The gauge connecting coupling serves as connecting piece to a coupling groove part DN20. When cou-
pling, a pin in the gauge connecting coupling opens the flow of the opposite coupling groove part (forced
opening). This allows to read the present operating pressure on the screwed-in gauge. When discon-
necting, the concial nipple of the groove part is closed by spring load (pressure and vacuum tight). If the
gauge connecting coupling is not connected the gauge shows „zero pressure“. The connecting coupling VK/B-03/20
allows to install the gauge in any required position (rotatable 360°). VK/BG-03/20
70 70 70 C 3105-09
DILO COUPLINGS DN40
C 3106-08 71 71
DILO-KUPPLUNGEN DN40
PN16 DN40
COUPLING GROOVE PART
SM...
VK/F-01/40
GS... VK/KN-01/40
ML1-AD42-1
ML1-AD42-2
72 72 72 C 3106-08
PN16 DN40
FLANGE COUPLING
VK/F-01/40
VK/KN-01/40
Spare O-ring
Order No. 05-0057-R126
C 3106-08 73 73 73
DILO-KUPPLUNGEN DN40
PN16 DN40
COVERING CAP
VK/FL-01/40
Spare O-ring
Order No. 05-0057-R126
74 74 74 C 3106-08
PN16 DN40
COUPLING TONGUE PART
SM... VK/FL-01/40
GS... VK/A-02/40
Spare O-ring
Order No. 05-0057-R141
ML1-AD42-1
ML1-AD42-2
C 3106-08 75 75 75
DILO-KUPPLUNGEN DN40
SK-282-R001 VK/FL-01/40
VK/F-02/20 VK/A-02/40
Subject to change without notice. . © Copyright DILO
VK/KN-04/20
76 76 76 C 3106-08
DILO SOLDERING UNIONS
DILO soldering unions are particularly used in fac- DILO soldering unions of the ML1 series for pressures
tory fabrication area piping. DILO offers a very wide up to PN64
variety of unions. Soldering unions are available
either with soldering connections on both ends ▪ ML1A-AD Soldering stub-soldering union PN64...............78
where the highest vibration resistance is required Screw-in stub-soldering union PN64
or with a soldering connection on one end and a ▪ ML1BO-AD
with O-ring..........................................................79
screw in thread on the other.
Gauge union
DILO soldering unions withstand pressures up to ▪ ML1M-AD10
PN64 DN8...........................................................80
64 bar.
Gauge union
Different materials are available for all applicatons. ▪ 3-328-R020
PN64 DN8...........................................................81
The suitable connecting parts for DILO couplings ▪ ML1-..8 Blanking disk PN64............................................82
must be ordered separately.
▪ VST03 Plug PN64...........................................................82
▪ 05-1545-R... Tee piece.............................................................83
▪ 05-1545-R... Angle piece.........................................................83
▪ 05-1545-R... Plug-in angle piece.............................................84
C 3107-07 77 77
DILO SOLDERING UNIONS
PN64
SOLDERING STUB-SOLDERING UNION
Tube outside
d2 d3 L1 I1 h1 h3 h6 h7 m1 m2 i1 s1 s3 Order No.
diameter Ø AD
10 8 M20x1,5 35 20 9,5 4 8 8 18 4 12 22 24 ML1A-AD10 P
10 8 M20x1,5 35 20 9,5 4 8 8 18 4 12 22 24 ML1A-AD10 C
15 12 M26x1,5 52 22 13,5 5 10 10 20 5 12 27 32 ML1A-AD15 P
22 19 M36x2 54 31 15,5 6 12 12 26 7 16 41 41 ML1A-AD22 P
22 19 M36x2 54 31 15,5 6 12 12 26 7 16 41 41 ML1A-AD22 C
42 35 M56x2 65 37 19,5 7 20 20 29 7 18 60 65 ML1A-AD42 P
42 35 M56x2 65 37 19,5 7 20 20 29 7 18 60 65 ML1A-AD42 C
Note: For the nominal width (outside diameter 10) the clamping nut is made of stainless steel.
78 78 78 C 3107-07
PN64
SCREW-IN STUB-SOLDERING UNION WITH O-RING
Spare O-ring
Order No. AD10: 05-0057-R016
AD15: 05-0057-R087
AD22: 05-0057-R039
AD42: 05-0057-R126
Tube outside
diameter d2 d3 d4 d7 L2 I2 h1 h3 h7 m1 m2 i1 i2 a2 s2 s3 Order No.
Ø AD
10 8 M20x1,5 M16x1,5 26 40 25 9,5 4 8 18 4 12 12 2 27 24 ML1BO-AD10 P
10 8 M20x1,5 M16x1,5 26 40 25 9,5 4 8 18 4 12 12 2 27 24 ML1BO-AD10 T
10 8 M20x1,5 G 3/8 A 26 40 25 9,5 4 8 18 4 12 12 2 27 24 ML1BO-AD10G P
10 8 M20x1,5 G 3/8 A 26 40 25 9,5 4 8 18 4 12 12 2 27 24 ML1BO-AD10G T
15 12 M26x1,5 G½A 32 47 27 13,5 5 10 20 5 12 14 3 32 32 ML1BO-AD15G P
22 19 M36x2 M33x2 49 59 36 15,5 6 12 26 7 16 18 3 50 41 ML1BO-AD22 P
22 19 M36x2 M33x2 49 59 36 15,5 6 12 26 7 16 18 3 50 41 ML1BO-AD22 T
22 19 M36x2 G1A 49 59 36 15,5 6 12 26 7 16 18 3 50 41 ML1BO-AD22G P
22 19 M36x2 G1A 49 59 36 15,5 6 12 26 7 16 18 3 50 41 ML1BO-AD22G T
Note: For the nominal width (outside diameter 10) the clamping nut is made of stainless steel.
Regarding material AL only part 13 or 14 is made of AL, part 1 and 2 are made of stainless steel.
In special version the screw-in thread can also be supplied with sealing edge according to DIN 3852-1 and DIN EN ISO 1179.
C 3107-07 79 79 79
DILO SOLDERING UNIONS
PN64
GAUGE UNION
Tube outside
diameter d2 d3 d4 d19 L10 I10 h1 h3 h7 m1 m2 i1 i5 s3 s8 Order No.
Ø AD
10 8 M20x1,5 G 1/2 7,5 49 34 9,5 4 8 18 4 12 16 24 24 ML1M-AD10/51
10 8 M20x1,5 G 1/4 5,5 44 29 9,5 4 8 18 4 12 13 24 22 ML1M-AD10/59
80 80 80 C 3107-07
PN64
GAUGE UNION
Spare O-ring
Order No. 05-0057-R225
C 3107-07 81 81 81
DILO SOLDERING UNIONS
PN64
BLANKING DISK
22 2 ML1-22-8 P Brass
42 3 ML1-42-8 P Brass
PN64
PLUG
Metric fine thread ISO Whitworth pipe thread Spare O-r ing
d4 d7 n1 i1 a2 s2 Bestellzeichen Material d4 Bestellzeichen Material Bestellzeichen
23 23 12 2 24 G 1/4 A VST03 / G 1/4 A T AL 05-0057-R088
M16x1,5 26 24 12 2 27 VST03 / M16x1,5 AL G 3/8 A VST03 / G 3/8 A T AL 05-0057-R016
36 32 15 3 36 G 1/2 A VST03 / G 1/2 A T AL 05-0057-R033
M33x2 49 38 18 3 50 VST03 / M33x2 T AL G1A VST03 / G 1 A T AL 05-0057-R039
65 45 22 3 65 G 1½ A VST03 / G 1½ A T AL 05-0057-R126
82 82 82 C 3107-07
DILO-Gesellschaft, D-8
pflichti
Jede nicht vom Urheber genehmigt
2768 1 6 über 6 30 über 30 120 über 120 400 Überlassung an Dritte usw.) ist st
Das Urheberrecht an dieser
Tee piece
+- 0,3 +- 0,5 -
A-A
-
Jede nicht vom Urheber genehmigte Benützung (VervielfäNlteingnumnagß,bereich L
2768 1 6 über 6 30 über 30 120 über 120 400 ÜDbIeNrlIaSsOsung an Dritte12u,5sw.) ist3,s2 trafba0r,8und macht schadenersatz-
-
DI N I S O
L1
h7
A A
pflichtig.
d2
AD
Tube outside
PN d2 L L1 h7 Order No. Material
R a i n µm
diameter Ø AD
1302
15 64 12 38 19 10 05-1545-R004 Brass
+- 0,5
Angle piece
VM 9
MG 10
Maßstab
T-Stück AD22
A-A
c h
GL 11
1:1
e i
TL 12
r
+- 0,2
e
VK 13
ß b
EK 14
a
EL 15
n m
dxf 16 Werkstoff
e n
KE 17
mittel +- 0,1
N
GF 18 Mitteil.- Tag
MT 19 Nr. Änderung Name
D-87727 B
PDF 20 Ers. für:
DIN ISO
0,8
L1
h7
3,2
d2
12,5
AD
Oberflächenangaben
Tube outside
R a i n µm
DIN ISO
diameter Ø AD
10 64 8 14,5 8 05-1545-R005 Brass
15 64 12 19 10 05-1545-R008 Brass
22 Abteil. Nr64
. Anz. 19 24,5 12 05-1545-R006 Brass
TB 1
42 AV 2 25 39 45 20 05-1545-R007 Brass
Betr. 3
Betr. 4
Betr. 5 2013 83
Ta g
83
Name
83
Zeichnungs-
C 3107-07
Betr. 6 gez. 29.10. tp
Betr. 7
AB 8 gepr./ frei
1-05-1
A A
pflichtig.
PLUG-IN ANGLE PIECE
berla ssun g
A-A
+- 0,5
l1
+- 0,3
Nennmaßbereich
d1
+- 0,2
L1
mittel +- 0,1
h7
DIN ISO
2768
d2
AD
0,8
3,2
Tube outside
PN d2 L1 h7 L2 d1 I1 Order No. Material
12,5
diameter Ø AD
10 64 8 14,5 8 21,5 10 10 05-1545-R010 Brass
Oberflächenangaben
15 64 12 19 10 26 15 13 05-1545-R011 Brass
22 64 19 24,5 12 34 22 16 05-1545-R012 Brass
R a i n µm
DIN ISO
1302
84 84 84 C 3107-07
DILO BALL VALVES
The ball valve has a compact design and is mainte- DILO ball valves for pressures up to PN64
nance-free. The notch on the spindle head and the
position of the handle show the flow rate (closed or
opened). The flow rate is controlled by a ball which ▪ 3-365-R001 Ball valve PN64 DN8......................................... 86
is stored in a sealing. Each ball valve is tested for ▪ 3-365-R008 Ball valve with handwheel PN64 DN8............. 87
tightness in our works.
▪ 3-383-R001 Ball valve PN64 DN20....................................... 88
All ball valves are temperature-resistant from -40
▪ 3-679-R001 Ball valve PN25 DN40....................................... 89
°C to +80 °C.
The suitable connecting parts must be ordered
separately.
C 3108-03 85 85
DILO BALL VALVES
PN64 DN8
BALL VALVE
SM...
ML1-AD10-1
ML1-AD10-2
86 86 86 C 3108-03
PN64 DN8
BALL VALVE WITH HANDWHEEL
SM...
ML1-AD10-1
ML1-AD10-2
GS...
C 3108-03 87 87 87
DILO BALL VALVES
PN64 DN20
BALL VALVE
SM...
ML1-AD22-1
ML1-AD22-2
88 88 88 C 3108-03
PN25 DN40
BALL VALVE
SM...
ML1-AD42-1
ML1-AD42-2
Subject to change without notice. . © Copyright DILO
GS...
C 3108-03 89 89 89
90 90 90
DILO HOSES
We also offer wire braided stainless steel hoses as DILO hoses up to nominal diameters DN40
well as rubber hoses. They are pressure and vacu-
um tight and are available with different coupling
connections. No matter whether you need a hose ▪ SM01 Wire braided hose............................................. 92
for connection to SF6 maintenance devices, gas ▪ SM03 Wire braided hose with elbow connection......93
insulated fabrication plants or other devices, we
can offer the appropriate hose connection.
▪ SM07 Wire braided hose with elbow connections.... 94
▪ SM10 Wire braided hose with protective hose..........95
The suitable connecting parts must be ordered
separately. ▪ SM16 Wire braided hose with heat shrink tubing......96
▪ GS01 Rubber hose....................................................... 97
▪ GS03 Rubber hose with elbow connection.................98
▪ Ordering examples
99
C 3109-08 91 91
DILO HOSES
ML1-AD10-3
ML1-AD22-3
ML1-AD42-3
UV-resistant. Increased service life and temperature resistance compared to rubber hose.
VK/A-02/20
VK/A-01/40
92 92 92 C 3109-08
DN8 / DN20 / DN40
WIRE BRAIDED HOSE WITH ELBOW CONNECTION
ML1-AD10-3
ML1-AD22-3
ML1-AD42-3
VK/F-02/8
VK/F-02/20
VK/F-01/40
VK/A-02/20
VK/A-01/40
C 3109-08 93 93 93
DILO HOSES
SM0708L
64 8 38 130 10 8 M20x1,5 24
_______
SM0720L
40 20 70 170 22 19 M36x2 41
_______
ML1-AD10-3
ML1-AD22-3
VK/F-02/8
VK/F-02/20
94 94 94 C 3109-08
DN8 / DN20 / DN40
WIRE BRAIDED HOSE WITH PROTECTIVE HOSE
ML1-AD10-3
ML1-AD22-3
ML1-AD42-3
VK/F-02/8
VK/F-02/20
VK/F-01/40
C 3109-08 95 95 95
DILO HOSES
ML1-AD10-3
ML1-AD22-3
ML1-AD42-3
VK/F-02/8
VK/F-02/20
VK/F-01/40
Fitting material:
VK/A-02/20 Stainless steel
VK/A-02/40
96 96 96 C 3109-08
DN8 / DN20 / DN40
RUBBER HOSE
ML1-AD10-3
ML1-AD22-3
ML1-AD42-3
VK/F-02/8
VK/F-02/20
VK/F-01/40
VK/A-02/20
VK/A-01/40
C 3109-08 97 97 97
DILO HOSES
DN8 / DN20
RUBBER HOSE WITH ELBOW CONNECTION
ML1-AD10-3
ML1-AD22-3
ML1-AD42-3
VK/F-02/8
VK/F-02/20
3-308-R002
Range of application and temperature:
From -40 °C to +100 °C depending on medium (see DIN EN 853/854)
98 98 98 C 3109-08
ORDERING EXAMPLES
WIRE BRAIDED HOSES AND RUBBER HOSES
Reference number
01= straight hose
03= hose with elbow one end
07= hose with elbow both ends
10= straight hose with protective sheath
16= straight hose with shrink tubing
Rubber hoses
Ordering example: GS 01 08 L00450
Reference number
01 = straight hose
Subject to change without notice. . © Copyright DILO
GS = Rubber hose
C 3109-08 99 99 99
100100 100
DILO TRANSITION PIECES AND ADAPTERS
Our product range comprises a large variety of DILO transition pieces and adapters for pressures up to
transition pieces and adapters to establish connec- PN64
tions between components with different nominal
lengths. Thus DILO connecting couplings and hoses ▪ 6-1033-R001/ Adapter DILO-couplings DN20
allow the comfortable adaption to other coupling 6-1058-R.../ ASEA / Magrini / Siemens/
systems on switchgear. SK-279-R... / 6-1027-R... Westinghouse...........................................102 - 106
The suitable connecting parts must be ordered ▪ 3-920-R002/ R001 Adapter - Hansen connection..................107 - 108
separately. Adapter DILO DN8 -
▪ 3-353-R005/ R006
Michelin valve.........................................109 - 110
Adapter with flange coupling on both
▪ 6-1059-R.../ 6-1203-R...
ends.......................................................... 111
▪ K022R02 Tee piece with DILO couplings................112
▪ 3-351-R001 P Screw-in stub........................................... 113
▪ SK-386 T/ 3-240-R.../
3-251-R001/ Transition pieces...................................... 114 - 117
3-314-R001
▪ 3-227-R001/
3-311-R001/ Intermediate pieces..................................118
3-984-R001
▪ 3-816-R001/
Transition pieces.......................................119 - 122
R002/ R003 / R005
▪ K018-R02/ R06/
3-717-R.../K018R07/ Angle pieces.............................................123 - 127
K018R..
▪ K020R.. Tee pieces.................................................128 - 129
▪ 3-718-R006/R036 Distributor..................................................130 - 131
▪ 3-1026-R002 Tubings......................................................132
PN64 DN20
ADAPTER DILO COUPLING DN20 -
ASEA CONNECTION
ASEA connection
SK-282-R001
VK/F-02/20
VK/KN-04/20
ASEA connection
SK-372-R...
VK/F-02/8
VK/KN-04/8
C 3110-08
103 103 103
DILO TRANSITION PIECES AND ADAPTERS
PN64 DN20
ADAPTER DILO COUPLING DN20 -
MAGRINI CONNECTION
Ø 14 6-1058-R001 Brass
Ø 16 6-1058-R002 Brass
Magrini connection
SK-282-R001
VK/F-02/20
VK/KN-04/20
G1 98 41 SK-279-R002 P Brass
Siemens connection
SK-282-R001
VK/F-02/20
VK/KN-04/20
C 3110-08
105 105 105
DILO TRANSITION PIECES AND ADAPTERS
PN64 DN20
ADAPTER DILO COUPLING DN20 -
WESTINGHOUSE CONNECTION
Westinghouse connection
SK-282-R020
VK/F-02/20
VK/KN-04/20
Hansen connection
G 3/4 A
SK-282-R020
VK/F-02/20
VK/KN-04/20
C 3110-08
107 107 107
DILO TRANSITION PIECES AND ADAPTERS
PN64 DN8
ADAPTER DILO COUPLING DN8 -
HANSEN CONNECTION
Hansen connection
G 1/4 A
SK-372-R...
VK/F-02/8
VK/KN-04/8
SM...
ML1-AD10-1
ML1-AD10-2
GS...
C 3110-08
109 109 109
DILO TRANSITION PIECES AND ADAPTERS
PN2 DN8
ADAPTER DILO DN8 - MICHELIN VALVE
ML1-AD10-3
VK/F-02/8
VK/A-02/8
3-308-R002
3-408-R001
VK/F-02/8
VK/F-02/20
VK/F-01/40
C 3110-08
111 111 111
DILO TRANSITION PIECES AND ADAPTERS
3-777-R001
SK-282-R001
VK/FL-01/20
VK/F-02/20
3-685-R001
VK/KN-04/20
VK/A-02/20
VK/B-03/20
VK/BG-03/20
SM...
ML1-AD10-1
ML1-AD10-2
GS...
C 3110-08
113 113 113
DILO TRANSITION PIECES AND ADAPTERS
PN64 DN8
TRANSITION PIECE DN8
SM...
ML1-AD10-1
ML1-AD10-2
GS...
SM...
ML1-AD22-3
ML1-AD10-1 VK/F-02/20
ML1-AD10-2
VK/A-02/20
GM...
C 3110-08
115 115 115
DILO TRANSITION PIECES AND ADAPTERS
SM...
ML1-AD10-3
ML1-AD22-1 VK/F-02/8
ML1-AD22-2
VK/A-02/8
GS...
3-308-R002
ML1-AD22-3 ML1-AD10-3
VK/F-02/20 VK/F-02/8
VK/A-02/20 VK/A-02/8
3-308-R002
C 3110-08
117 117 117
DILO TRANSITION PIECES AND ADAPTERS
ML1-AD10-3
ML1-AD22-3
ML1-AD42-3
VK/F-02/8
VK/F-02/20
VK/F-01/40
VK/A-02/8
VK/A-02/20
VK/A-01/40
3-308-R002
(only for 3-227-R001 P)
3-888-R001
(only for 3-311-R001 P)
SM...
ML1-AD22-3
ML1-AD42-1
VK/F-02/20
ML1-AD42-2
VK/A-02/20
GS...
C 3110-08
119 119 119
DILO TRANSITION PIECES AND ADAPTERS
ML1-AD22-3 ML1-AD42-3
VK/F-02/20 VK/F-01/40
VK/A-02/20
VK/A-02/40
SM... ML1-AD42-3
ML1-AD22-1 VK/F-01/40
ML1-AD22-2
GS... VK/A-02/40
C 3110-08
121 121 121
DILO TRANSITION PIECES AND ADAPTERS
SM... SM0120
ML1-AD42-1 ML1-AD22-1
ML1-AD42-2 ML1-AD22-2
GS... GS0120
SM...
ML1-AD22-3
ML1-AD42-3
ML1-AD..-1
VK/F-02/20 ML1-AD..-2
VK/F-01/40
GS...
VK/A-02/20
VK/A-02/40
3-888-R001
C 3110-08
123 123 123
DILO TRANSITION PIECES AND ADAPTERS
SM... ML1-AD10-3
ML1-AD22-3
ML1-AD42-3
ML1-AD..-1
ML1-AD..-2 VK/F-02/8
VK/F-02/20
VK/F-01/40
GS...
VK/A-02/8
VK/A-02/20
VK/A-02/40
3-888-R001
(only for 3-717-R002 P)
suitable connecting
parts
ML1-AD10-3
ML1-AD22-3
ML1-AD42-3
VK/F-02/8
VK/F-02/20
VK/F-01/40
VK/A-02/8
VK/A-02/20
VK/A-02/40
3-888-R001
(only for K018R20)
C 3110-08
125 125 125
DILO TRANSITION PIECES AND ADAPTERS
ML1-AD10-3
ML1-AD22-3
ML1-AD42-3
VK/F-02/8
VK/F-02/20
VK/F-01/40
VK/A-02/8
VK/A-02/20
VK/A-02/40
3-888-R001
SM...
ML1-AD..-1
ML1-AD..-2
GS...
C 3110-08
127 127 127
DILO TRANSITION PIECES AND ADAPTERS
ML1-AD10-3
ML1-AD22-3
VK/F-02/8
VK/F-02/20
VK/A-02/8
VK/A-02/20
3-308-R002
(only for K020R66)
3-888-R001
(only for K020R14)
SM...
ML1-AD..-1
ML1-AD..-2
GS...
C 3110-08
129 129 129
DILO TRANSITION PIECES AND ADAPTERS
3 X DN20 / 1 X DN40
DISTRIBUTOR
VK/F-02/20 P VK/F-01/40 E
Coupling tongue part Coupling tongue part
DN20 DN40
3-383-R001 P
Ball valve DN20
VK/F-02/20 P VK/F-02/20 P
Coupling tongue part Coupling tongue part
DN20 DN20
C 3110-08
131 131 131
DILO TRANSITION PIECES AND ADAPTERS
TUBINGS
(Example)
DILO offers a wide range of connections suitable DILO SF6 bottle connections
for all commercial SF6 bottles. Thus safe and quick
connection of hoses of DILO service carts or SF6 gas
refilling devices to the SF6 gas bottles is guaran- ▪ 3-316-R001 SF6 bottle connection...............................134
teed. This refers to bottle connections for new gas ▪ 3-858-R001 Angle SF6 bottle connection.................... 135
as well as for reuse gas.
▪ 3-643-R001 Chinese SF6 bottle connection.................136
The suitable connecting parts must be ordered
▪ 3-643-R002 Chinese SF6 bottle connection.................137
separately.
▪ 3-245-R001 American SF6 bottle connection............. 138
▪ 3-334-R002 American SF6 bottle connection..............139
▪ 3-245-R002 English SF6 bottle connection..................140
▪ 3-245-R004 English SF6 bottle connection..................141
▪ 3-851-R002 Connection for reuse gas bottle..............142
▪ 3-851-R003 Connection for reuse gas bottle..............143
Angle for connection of reuse gas
▪ 3-858-R002
bottle.........................................................144
▪ 6-1037-R050 Storage connecting hose DN20.............. 145
▪ 6-1041-R050 Storage connecting hose DN8.................146
PN64 DN8
SF6 BOTTLE CONNECTION W21,80X1/14“ -
DIN 477 Nr. 6
SF6 bottle
3-365-R008
3-316-R001
C 3834-01
135 135 135
DILO SF6 BOTTLE CONNECTIONS
PN64 DN8
CHINESE SF6 BOTTLE CONNECTION G 5/8 -
0,960“-14NGO-LH-EXT - CGA 590
3-393-R...
3-365-R008
C 3834-01
137 137 137
DILO SF6 BOTTLE CONNECTIONS
PN64 DN8
AMERICAN SF6 BOTTLE CONNECTION
0,960“-14NGO-LH-EXT - CGA 590
3-393-R...
3-365-R008
C 3834-01
139 139 139
DILO SF6 BOTTLE CONNECTIONS
PN64 DN8
ENGLISH SF6 BOTTLE CONNECTION G 5/8 -
BS No. 3
3-393-R...
3-365-R008
C 3834-01
141 141 141
DILO SF6 BOTTLE CONNECTIONS
PN64 DN8
CONNECTION FOR REUSE GAS BOTTLE 1“ -
DIN 477 Nr. 8
3-365-R008
3-393-R...
C 3834-01
143 143 143
DILO SF6 BOTTLE CONNECTIONS
PN64 DN8
ANGLE FOR CONNECTION OF REUSE GAS BOTTLE 1“ -
DIN 477 Nr. 8
3-851-R002
3-777-R001
VK/FL-01/20
3-685-R001
VK/A-02/20
VK/B-03/20
VK/BG-03/20
C 3834-01
145 145 145
DILO SF6 BOTTLE CONNECTIONS
PN64 DN8
STORAGE CONNECTING HOSE DN8
SF6 bottle
3-778-R001
SK-272-R001 / R003
Subject to change without notice. . © Copyright DILO
VK/A-02/8
VK/B-03/8
VK/BG-03/8
DILO
Armaturen und Anlagen GmbH
25.02.2021 © Copyright DILO
Frundsbergstrasse 36
D-87727 Babenhausen
+49 (0) 83 33 3 02-0
+49 (0) 83 33 3 02-302 www.dilo.com
info@dilo-gmbh.com